MISC

436 products

    436 products
    Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000
    Hobie drain plug 10091000 Hobie 18
    DRAIN PLUG W/GASKET
    Misc
    3/16 - 1/4" Split Ring Murrays Part# 22-9492 Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin.  This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler Medium Split ring Dimensions: 5/8″ Diameter Material: 316 Stainless steel. This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans.
    SPLIT RING 3/16-1/4"
    Misc
    10 Hole Hobie shroud adjuster
    SHROUD STAY ADJUSTER 10-HOLE
    MISC
    3/16 - 1/4" Split Ring with Pigtail Murrays Part# 22-9491 A pigtail makes this split ring (ring ding) easier to open than standard split rings. For use on 3/16″ – 1/4″ clevis pins Material: 316 Stainless steel. Medium Split ring Dimensions: 5/8″ Diameter This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. Applications: All Hobies Shroud and Forestay split ring H18/ Hobie 18 SX – Tiller Yoke Clevis Pin Ring Also called Ring Ding, Clevis Ring, Cotter Ring or Ringy Ding
    SPLIT RING 3/16-1/4" PIGTAIL
    Misc
    Cotter Pin 3/32 X 3/4 Murrays Part# 19-1015 Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111. Stainless steel cotter pin measures 3/32" x 3/4".
    COTTER PIN 3/32 X 3/4
    Misc
    Sealed Stainless Steel 3/16" x 3/8" Pan Head Rivet Murrays Part# 19-5032S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified: Hobie 14 (2) or 16 (4) mast head Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4) Hobie 14/16
    RIVET CCP SEALED 6-6 (3/16 X 3/8)
    Misc
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    CLEVIS PIN 1/4 X 5/8
    Misc
    RIVET CCP 6-6 (3/16 X 3/8) Murrays Part# 19-5032 Stainless steel 3/16" x 3/8" pan head rivet Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified: Hobie 14 (2) or 16 (4) mast head Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4) Hobie 14/16 rudder upper casting (2) Hobie 14/16 tiller end cap (2) Hobie 14/16 boom front end cap (3) Pair with stainless steal rivet casings to seal the holes when using on the mast.
    RIVET CCP 6-6 (3/16 X 3/8)
    Misc
    Hobie Downhaul Cheek Block Murrays Part# 25-3340 The plastic sheave degrades and breaks on older Hobie® 16 downhaul cheek blocks and the entire block must be replaced. Also fits Sol Cat 18. Hole spacing 1/2" on center from side to side; 2-3/4" on center from end to end. To install, use four #19-5031 6-4 rivets and four #19-5020 sealing casings. Hobie Cat® Part# 20710000.
    HOBIE DOWNHAUL CHEEK BLOCK
    Misc
    CLEVIS PIN 3/16 X 7/8
    Misc
    Mast Cleat Murrays Part# 011-6481 The Mast Cleat is a can be used as a downhaul / halyard cleat on a Hobie 14 and or 16. Compare to Hobie Cat® factory item #10730000. 31mm Center to Center.
    MAST CLEAT
    Misc
    O-RING: 6" SCREW-IN
    MISC
    Hobie Cat 8010181 Rivet
    RIVET CCP SEALED 6-4 (3/16 X 1/4)
    Misc
    Nut Nylock 5/16-18 Stainless Steel Murrays Part# 19-2520 5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut Used with Hobie Getaway Bow Tang Bolt
    NUT NYLOCK 5/16-18 (SS)
    Misc
    Out of Stock
    TIRE TUBE CAT TRAX
    Misc
    MAST HINGE PIN NACRA/H17/20 Murrays Part# 56-F158 The mast base engages the mast ball and is secured by this headless clevis pin to allow the mast to be safely raised or lowered. Specs: 1/4" diameter x 2-3/8" overall length with a grip length of 1-15/16" Compatibility: Nacra Inter, F18, N15, F17, 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ, as well as Hobie 17, Tiger and 20. Split rings are sold separately. Compare to Hobie Cat part number 50406301.
    MAST HINGE PIN NACRA/H17/20
    Misc
    STOP SLEEVE 1/8"
    MISC
    Use this 1/8″ Dacron line for batten tie line and roller furling systems. For batten ties, allow about 18″ of line for each batten. Sold per foot. Spool: 1000′ (304.9m). Compare to Hobie part number RH112WHT - 8004510
    DACRON SOLID BRAID 1/8" WHITE
    Misc
    Rivet CCC 6-6 (3/16 X 3/8) Countersunk Murrays Part# 19-5024 Countersunk stainless steel 3/16" x 3/8" rivet for traveler tracks, etc. Compare to Hobie Part # 8010201. This rivets is what Hobie recommends for both the main traveler tack and the jib traveler track. We also recommend using an 1/8" stop sleeve, part number 002-1041, as a spacer to help you apply pressure on the rivet inside the track, as the track is too narrow for most rivet guns to get far enough inside to apply pressure to the rivet.
    RIVET CCC 6-6 CSK
    Misc
    QR PIN DELUXE 3/16 X 3/4
    Misc
    Clevis Pin 1/4 X 1/2 Murrays Part# 22-9808 Stainless steel clevis pin. Measurement is 1/4" diameter x 1/2" grip length (shoulder to the split ring hole). Substitute for Hobie Cat® #8020371.
    CLEVIS PIN 1/4 X 1/2
    Misc
    MAST STEP HINGE PIN PRINDLE
    MISC
    CLEVIS PIN 1/4 x 3/8
    Misc
    5/16 - 3/8" Split Ring Stainless steel split ring for 5/16″-3/8″ diameter clevis pins. The larger size makes it easier to get on and off. Large Split ring Dimensions: 3/4″ Diameter Material: 316 Stainless steel. Also called Ring Ding or Ringy Dingy. Hobie Part number 20860010 – RF686
    SPLIT RING 5/16 -3/8"
    Misc
    RHMS 5/16-18 X 1.25 (SS)
    Misc
    Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033 Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231.
    RIVET CCP 6-8 (3/16 X 1/2)
    Misc
    STAINLESS STEEL CINCH RINGS 3/16 - 3/8" Stainless steel cinch ring for use securing the ends on shock cord or line. Also called hog rings. We use these to secure the hook on the end of trapeze bungees, as securing the ends on our shock cord trampoline lacing kit. Sold Individually. Hobie part 53180010
    STAINLESS STEEL CINCH RINGS 3/16 - 3/8"
    Misc
    3/16" Split Ring - 7/16″ Diameter Murrays Part# 22-9490 Stainless steel split ring for 1/8-3/16″ diameter clevis pins. Comparable to Hobie Cat® #81503100 Small Clevis Ring. This is a super small size, best for locations where you may be concerned about it snagging on something. The small size helps prevent it from snagging on lines, sheets, sails and clothing.
    SPLIT RING 3/16
    Misc
    CAT RACING: FOR THE 90'S
    MISC
    Rivet CCP 6-10 (3/16 X 5/8) Murrays Part# 19-5034 Stainless steel 3/16" x 5/8" rounded pan head rivet. Compare to Hobie Cat® #8010121. Halyard mast cleat rivet
    RIVET CCP 6-10 (3/16 X 5/8)
    Misc
    CLEVIS PIN 3/16 X 1/2
    Misc
    Quick-Release Pin Detent 1/4 X 1-1/2 Murrays Part# 18-4D150 The Quick-Release Pin Detent 1/4 X 1-1/2 is an economical, quick connection for Hobie 16 mast step pin. A spring-loaded ball exerts sufficient pressure to help avoid accidental release. Measurements are 1/4″ diameter x 1-1/2″ maximum grip length (distance from the shoulder to the locking ball bearings).
    QR PIN DETENT 1/4 X 1.5
    Misc
    M8 T-Nuts: Titanium Hydrofoil Mast Track Inserts
    TITANIUM T-NUTS M8
    MISC
    RIVET MSP 6-10 3/16 X 5/8 PH
    Misc
    Rivet CCP 6-4 (3/16 X 1/4) Murrays Part# 19-5031 Stainless steel 3/16" x 1/4" rounded pan head rivet. Compare to Hobie Cat® #8010181. This is a common rivet used on many extrusions. Hobie, Nacra, Prindle masts and booms. Pair with a rivet casing to seal the rivet hole when used on masts. All Hobie mast hounds, tangs, heads, and cheek blocks. Used with Hobie Getaway Bow Spreader Plates Used on Hobie Getaway FWD and REAR Crossbar Stop Plates
    RIVET CCP 6-4 (3/16 X 1/4)
    Misc
    MYLAR SAIL REPAIR 2"x10' CLEAR
    Misc
    Hobie 18 mast step hinge pin, has a hole on one end only. The headless clevis pin measures 1/4″ diameter by 3-3/8″ grip length Hobie Part # 8020501
    CLEVIS PIN HEADLESS 1/4 X 3-3/8
    Misc
    CLEVIS PIN 3/16 X 5/8
    Misc
    Cat Bag 4" Murrays Part# 001-1169 The Cat Bag provides handy storage inside a deck port! The sturdy nylon bag with plastic collars hangs inside 4" access port on a molded shoulder. 12" deep. Hobie Cat® uses #5402 for this item.
    PORT CAT BAG 4"
    Misc
    Premium Marine shock cord Use 3/16″ or 1/4″ for trapeze shock cords. Hobie uses #RS014BLK for 1/4″ bungee cord. Uses: 1/4″ shock cord is primarily used for trapeze shock cord.   Hobie 16 use 2 x 8′ sections for the trapeze shock cord Hobie 17 uses one 12′ section for the trap shock cord. Hobie 18 uses 4 x 7' pieces Nacra rudder bungees: Factory spec is 4′ of 1/4″ shock cord but it is a common upgrade to use 5/16″ We use 60' of 3/8' in our trampoline bungee lacing kits.
    PREMIUM MARINE GRADE SHOCK CORD
    Misc