In Stock

In Stock

2261 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2261 products
    AQUASEAL .75oz (TUBE)
    Gear Aid
    AQUASEAL .75oz PACKAGE WITH COTOL .5OZ
    Gear Aid
    ARRIBA CORK BALL GRIP KIT Murrays Part# 44-0002 The Cork Ball Grip Kit replaces the stock Arriba, Murrays Aluminum Tiller and Hot Stick end grips. The ball is predrilled, lightweight and makes the hiking stick easier to hold. The inside diameter is 1-1/8". Epoxy adhesive is included. Hobie Cat® item #FXGRIP. Order epoxy (#00-0002-1) to "caramel-coat" the cork ball handle to make it last longer
    Powerstick Cork Ball Grip Kit
    ARRIBA CORK BALL GRIP KIT
    Murrays Sports
    Sale
    Arriba Fx6 Unused or lightly used with grip
    Arriba
    Save $100
    BARZ SAN JUAN ACETATE POLARIZED LENSES
    Barz
    BARZ SEALED GASKETS-BLACK
    Barz
    This "potato chip" (2" OD) pad fits or can be modified to fit almost any main beam extrusion for use with a 3-hole swivel cleat. To modify, put sandpaper on beam and rub base pad to suit and/or fill gap with silicone sealant and allow to dry before securing.
    BASE PAD UNIVERSAL 3-HOLE KIT
    Murrays Sports
    Base Pad Universal U-drill  Murrays Part# 001-8014 This "potato chip" (2" OD) pad fits or can be modified to fit almost any main beam or mast extrusion for use with Harken micro cleats with fairleads or Ronstan small cleats with fairleads. To modify, put sandpaper on beam and rub base pad to suit and/or fill gap with silicone sealant and allow to dry before securing. Fasteners are not included.
    BASE PAD UNIVERSAL U-DRILL
    Murrays Sports
    Base Pad: Flat 3-Hole Murrays Part# 25-3001 Use to mount a swivel cam to any flat surface. This adapter is not necessary when using Hobie's Offset Base Pad #07-1162.
    BASE PAD: FLAT 3-HOLE
    Ronstan
    BATTEN CAP RBS 10 X 7mm
    RBS
    BATTEN CAP RBS 10 X 8mm
    RBS
    Batten Tensioner Murrays Part# 007-1528 This great idea from Europe gives precision adjustment when tensioning battens. The screw thread adjuster allows as fine an adjustment as you want. It clips to the sail at the batten tie strip grommets and pushes against the end of the batten. No batten cap is required. Hobie Cat® Part# 1528
    BATTEN TENSIONER
    Bainbridge
    Sale
    BBTALKIN' 4-PORT USB CAR CHARGER
    BBTalkin'
    Save $14.95
    Sale
    BBTALKIN' 4-PORT USB CHARGER
    BBTalkin'
    Save $14.95
    BBTalkin' Baseball Cap Headset V2.0 Murrays Part# 52-2511C BBTalkin' baseball cap with ear covers.
    BBTALKIN' BASEBALL CAP HEADSET V2.0
    BBTalkin'
    BBTalkin Bluetooth Microphone & Speaker Universal Helmet Earpiece Kit (Stereo)
    BBTalkin Bluetooth Microphone & Speaker Universal Helmet Earpiece Kit (Stereo) forward helmet
    BBTALKIN' BLUETOOTH MICROPHONE AND SPEAKER
    BBTalkin'
    BBTalkin' Boom Microphone Cover Murrays Part# 52-2530 The BBT Boom Microphone Cover (Set of 5) replacement foam cover. Includes foam cover and Velcro fastener which is compatible with the BbTALKIN USA head accessories.
    BBTALKIN' BOOM MICROPHONE COVER (5)
    BBTalkin'
    BBTalkin replacement headset speaker
    BBTalkin replacement headset speaker
    BBTALKIN' HEADSET SPEAKER REPLACMENT
    BBTalkin'
    The BBT Helmet Mounts have a slide and lock technology, locking the two tabs on the back of your waterproof case which houses your BbTALKIN unit.
    BBTALKIN' HELMET MOUNT
    BBTalkin'
    Helmet Speaker Pad with Microphone Murrays Part# 52-2512M-1 The Helmet Speaker Pad with Microphone is a single sided helmet speaker pad with microphone by BbTALKIN USA. This helmet pad is designed to be used with the Advance Unit. You plug the boom microphone’s 3.5mm audio cable directly into your Advance Unit to establish communication. The microphone and speaker piece on the helmet pads are completely waterproof. The design of the helmet pad allows the flexibility to change out either the microphone pie
    BBTALKIN' HELMET SPEAKER PAD WITH MICROPHONE
    BBTalkin'
    BBTalkin' Replacement Mic Murrays Part# 52-2509 The BBTalkin' Replacement Mic is a replacement part for both the Gath and Universal BBtalkin' headsets. Includes: waterproof microphone, screws, and o-ring.
    BBTalkin replacement headset speaker
    BBTALKIN' MIC REPLACEMENT
    BBTalkin'
    BBTalkin' Multi Connector Set Murrays Part# 52-2521 This connector is designed with our secure waterproof seal that screws into your BBTalkin' Unit. The end of this connector is a female 3.5mm jack. You can plug any male 3.5mm jack into this multi-connector. If you do not wish to use a BBTalkin' headset with your units, you can plug any earbud with microphone set up that has a 3.5mm male jack into this connector.
    BBTALKIN' MULTI CONNECTOR SET
    BBTalkin'
    BBTalkin' Sports Headset with Headband V2.0 Murrays Part# 52-2511-1 Waterproof headset designed for BBTalkin' Bluetooth Waterproof communication devices. The headband is a lightweight design with a single sided speaker and boom microphone. This comes with an arm band for mounting the unit.
    BBTALKIN' SPORTS HEADSET WITH HEADBAND V2.0
    BBTalkin'
    Big Cat Catamaran Righting System Murrays Part# 001-8293 The Big Cat Righting System features the extra line needed to bring bigger cats up from turtle position while keeping the deck clear for better footing. The extra length of 1/2" hollow braided line is quickly accessed by unhooking either or both ends of line with carbine hooks. Extra line is neatly suspended just aft of front crossbar and is held in place with shock cord. Blue water tested and proven! The Big Cat Righting System fits Hobie® 20/21, P
    BIG CAT RIGHTING SYSTEM
    Murrays Sports
    Sale
    BIG DRYER SAIL & BOOM BAG
    Murrays Sports
    Save $20
    Big Wave 10' Powerline Surf Leash-Black Murrays Part# 54-0610
    BIG WAVE 10' POWERLINE SURF LEASH-BLACK
    Misc
    Black Max Wind Indicator Murrays Part# 008-1295 Durable windvane made for the abuses of dinghy sailing. Dinghy sailing is more demanding of both sailors and equipment—both can get a beating on the water. The Black Max Dinghy Windvane was built stand by you take the abuse. This compact windvane mounts to the mast or boom to provide constant feedback of apparent wind angle. The needle bearing of the high-impact plastic vane optimizes sensitivity in light air.
    BLACK MAX WIND INDICATOR
    Davis
    BOLT #10 X .50"
    Hobie
    Bolt Hex Head 1/4-20 X 3.5" Stainless Steel Murrays Part# 19-2224 Stainless steel hex head bolt measures 1/4-20 x 3-1/2" Pylon Bolt for newer H16 Hobie Part# 8040361
    BOLT 1/4-20 X 3.5" (SS)
    Misc
    BOLT 10-32X3" PAN HEAD
    Harken
    Bolt 3/8-16 X 2" Murrays Part# 50-8040501 Replacement stainless steel 3/8-16 x 2" bolt is used on Hobie® 18 front and rear crossbars. Hobie Part# 8040501
    BOLT 3/8-16 X 2"
    Hobie
    Bolt Socket Head 3/8-16 X 2.50" Murrays part# 50-8040521 Hobie® factory replacement 3/8-16 x 2.50" socket head bolt is used on Getaway wing and Hobie® 18 rear inboard support. Hobie Part# 8040521
    BOLT 3/8-16 X 2.50"
    Hobie
    Bolt 3/8-16 x 3-1/2" HX HD 50-8040361 Pylon bolt used on Hobie 16 Sailboats from 1994 to present. Hobie Part# 8040361
    BOLT 3/8-16 x 3-1/2" HX HD
    Hobie
    Bolt 3/8-16 X 5" 50-8040061 Hobie® factory 3/8-16 x 5" bolt is used on Hobie 20 Miracle front crossbar. Hobie Part# 8040061
    BOLT 3/8-16 X 5"
    Hobie
    Bolt 5/16 X 18 X3.5" Murrays Part# 50-8040371 Hobie® factory replacement 5/16-18 x 3-7/16" bolt. Pylon bolt for Hobie® 14 and older 16 (1994 and prior; starting in 1995, boats had newer style castings/pylons). Hobie Part# 8040371
    BOLT 5/16 X 18 X3.5"
    Hobie
    Hex ​Bolt 5/16-18 X 1.25" Stainless Steel Murrays Part# 19-2228 Marine grade 316 stainless steel hex head bolt.
    BOLT 5/16-18 X 1.25" SS
    Misc
    Bolt Allen Head 5/16 18 X 1.5" (Stainless Steel) Murrays Part# 19-2229S Bolt Allen Head 5/16 - 18 X 1.5 (Stainless Steel) - replace hex head bolts used on Hobie 16, 17, 18, 20 Upper adjustable rudder castings. Limited space for Hex head requires thin walled 1/2" socket with 1/6" drive. Socket head bolt uses Allen head tool which is cheap, strong, and compact for on board storage and convenient adjustment.
    BOLT 5/16-18 X 1.5" (SS)
    Misc
    Bolt 5/16-18 X 2" Murrays Part# 50-8040331 Replacement 5/16-18 x 2" bolt is used as a rudder bolt on Hobie® Pre-EZ Lock Rudder System. Hobie Part# 8040331
    BOLT 5/16-18 X 2"
    Misc
    Bolt 5/16-18 x 2-1/2" HX HD Murrays Part# 50-8040321 EZ Loc Lower Rudder Bolt for Hobie Bravo, Getaway and Wave. Hobie Part# 8040321
    BOLT 5/16-18 x 2-1/2" HX HD
    Hobie
    Bolt Allen Head 1/4-20 X 2.5 (Stainless Steel) Murrays Part# 19-2222 Stainless steel Allen head bolt is used on Prindle tiller connector. Measures 1/4-20 x 2.5"
    BOLT ALLEN HEAD 1/4-20 X 2.5" SS
    Misc
    Recently viewed