Hobie

Hobie

610 products

    All Hobie OEM parts.  Sails to rudders, trampolines to batten caps.

    610 products
    Out of Stock
    H18 Vinyl Trampoline Set-White Murrays Part# 50-60970000 White vinyl trampoline for Hobie 18. Hobie Part# 60970000
    H-18 VINYL TRAMPOLINE SET-WHITE
    Hobie
    Out of Stock
    H20 Mesh Trampoline-Black Murrays Part# 50-40970055 Hobie® factory replacement mesh trampoline for the Hobie 20. For lacing, order 15 feet of 3/16" line #39-1211BK.
    H-20 MESH TRAMPOLINE-BLACK
    Hobie
    Out of Stock
    Wave Club Tramp Track Murrays Part# 50-39341011 Hobie® factory replacement tramp track for Wave Club. The Wave Club has a three-piece trampoline and the shrouds and bridles connect with clevis pins. Special order item.
    WAVE CLUB TRAMPOLINE TRACK
    Hobie
    H18 Trampoline Aft Lacing Strip-White Murrays Part# 50-63780000 Hobie® factory replacement white vinyl aft lacing strip only for Hobie® 18.
    H-18 TRAMPOLINE AFT LACING STRIP-WHITE
    Hobie
    Wave Trampoline Lacing Rod 49" Murrays Part# 50-38881011 Hobie® factory lacing rod for Wave Classic trampoline. Hobie Part# 38881011
    WAVE TRAMPOLINE LACING ROD 49"
    Hobie
    Out of Stock
    H20 Tiller Crossbar Murrays Part# 50-40521001 Hobie® factory replacement tiller crossbar for Hobie® 20.
    H-20 TILLER CROSSBAR
    Hobie
    H14 Tiller Crossbar-Black Murrays Part# 50-10520011 Tiller crossbar for Hobie 14. Hobie Part# 10520011
    TILLER X-BAR H14 BK
    Hobie
    Out of Stock
    H18 Straight Tiller Arm-Black Murrays Part# 50-60380111 Hobie® factory replacement black straight tiller tube for 1987 and later Hobie® 18. For Hobie 18's made in 1986 and before, a conversion kit (#50-60331010) is required.
    H-18 STRAIGHT TILLER ARM-BLACK
    Hobie
    Out of Stock
    WAVE TILLER ARM
    Hobie
    Out of Stock
    H16 Straight Tiller Arm-Black Murrays Part# 50-20382011 Hobie® factory replacement straight tiller arm for Hobie® 16. This tiller arm can be used on new or old Hobie 16 beachcats. The straight tiller arm allows for increased mast rake, by allowing the tiller x-bar to sit lower when the rudders are locked down. When used on pre '83 rudder casting assemblies, the tiller connector kit may touch the decks when the rudders are in the "up" position.
    H-16 STRAIGHT TILLER ARM-BLACK
    Hobie
    H14 Straight Tiller Arm-Black Murrays Part# 50-10382010 Hobie® factory replacement black straight tiller arm for Hobie® 14. Hobie Part# 10382010
    H-14 STRAIGHT TILLER ARM-BLACK
    Hobie
    Out of Stock
    H17 Tiller Arm-Black Murrays Part# 50-50321111 Hobie® factory replacement black tiller arm tube for Hobie® 17.
    H-17 TILLER ARM-BLACK
    Hobie
    Out of Stock
    H18 Bow Tang Murrays Part# 50-60120000 Hobie Cat® factory replacement bow tang for Hobie® 18.
    H-18 BOW TANG
    Hobie
    Out of Stock
    H20 Spreader Tip Murrays Part# 50-41410001 Hobie® factory replacement spreader tip for Hobie® 20. Hobie Part# 41410001
    H-20 SPREADER TIP
    Hobie
    Out of Stock
    H-20 SPREADER SLIDE
    Hobie
    Out of Stock
    H20 Spreader Brace Murrays Part#  50-41430001 Hobie factory replacement spreader brace for Hobie 20.
    H-20 SPREADER BRACE
    Hobie
    Out of Stock
    Spreader Arm Slide Murrays Part# 50-61440000 Hobie® factory replacement spreader arm slide. Discontinued by Hobie - feel free to email us to see about used options
    HOBIE SPREADER ARM SLIDE
    Hobie
    H14 Left Sidebar-Black Murrays Part# 50-10270011 Hobie® factory replacement black left sidebar for Hobie® 14.
    H-14 LEFT SIDEBAR-BLACK
    Hobie
    H14 Right Sidebar-Black Murrays Part# 50-10280011 Hobie® factory replacement black right sidebar for Hobie® 14.
    H-14 RIGHT SIDEBAR-BLACK
    Hobie
    H16 Sidebar-Black Murrays Part# 50-20270011 Hobie® factory replacement black sidebar for Hobie® 16.
    H-16 SIDEBAR-BLACK
    Hobie
    Out of Stock
    Gudgeon Long Locking Screws Murrays Part# 50-8030401 Hobie® gudgeon self-locking #12-24 screws come in a package of 16.
    GUDGEON LONG LOCKING SCREWS (16)
    Hobie
    Hobie Wave Mainsail-White Murrays Part# 50-38991000 Description: White mainsail for the Hobie Wave. A great alternative for those looking for a basic sail without colored panels.
    WAVE MAINSAIL (WHITE)
    Hobie
    Out of Stock
    H17SE and Sport Mainsail (White) Murrays Part# 50-52991000 Hobie® factory white replacement main sail for the Hobie 17SE and Hobie 17 Sport.
    H-17SE/SPORT MAINSAIL (WHITE)
    Hobie
    Out of Stock
    H17 Sport Jib Sail (White) Murrays Part# 50-52992006 Hobie® factory white replacement jib sail for the Hobie 17 Sport
    H-17 SPORT JIB SAIL (WHITE)
    Hobie
    Out of Stock
    H14 Roller Furling Jib Sail (White) Murrays Part# 50-10992511 Hobie® factory replacement white roller furling jib sail for Hobie® 14.
    H-14 ROLLER FURLING JIB SAIL (WHITE)
    Hobie
    Out of Stock
    H20 Rudder Pin Murrays Part# 50-40880011 5/16" x 9-1/4" end-to-end, with 3/32" hole at each end. Cotter pins sold separately (#19-1015 3/32" x 3/4" each). *****If your Hobie 20 has one piece rudder gudgeons, like H18, these pins will not fit.******
    H-20 RUDDER PIN (EACH)
    Hobie
    Out of Stock
    H17/18/20 Upper Rudder Casting Murrays Part# 50-50321001 Hobie® factory replacement upper left rudder casting for Hobie® 17, 18, 20 or Wave. Use four 6-8 rivets (#19-5033) for installation.
    H-17/18/20 UPPER RUDDER CASTING
    Hobie
    Out of Stock
    H20 3/16 Jib Swivel Pin Murrays Part# 50-41890001 Hobie® factory replacement pin swivel for Hobie® 20 jib.
    H-20 3/16" JIB SWIVEL PIN
    Hobie
    Nut Jam 9/16-18 Low Profile Murrays Part# 50-8050461 Hobie® factory replacement low-profile 9/16-18 jam nut is used on Hobie 17 dolphin striker. Hobie Part# 8050461
    NUT JAM 9/16-18" LOW PROFILE
    Hobie
    Out of Stock
    H14/Wave Mast Step Murrays Part# 50-10170011 Mast step for Hobie 14 (without threaded post) and Wave (96 and older). Hobie® factory replacement part. If you have a H14 with threaded post order #50-20200011 (see below). Requires four 6-6 rivets (item #19-5032).
    H-14/WAVE MAST STEP
    Hobie
    Out of Stock
    GETAWAY LOWER MAST
    Hobie
    Out of Stock
    H17/18 Mast Foam Plug Murrays Part# 50-60060000 Hobie® factory replacement foam plug for Hobie® 17 or 18 mast.
    H-17/18 MAST FOAM PLUG
    Hobie
    H-16 MAST ASSEMBLY WITH COMP TIP
    Hobie
    Out of Stock
    H-20 MAST ASSEMBLY
    Hobie
    Out of Stock
    hobie-18-mast-60610010
    H-18 MAST ASSEMBLY
    Hobie
    Main Traveler Track (Deep) Murrays Part# 50-50252021 This Hobie® factory replacement deep traveler track for Hobie® 17 can also be cut to fit Hobie 14 or 16. Use 18 #19-5024 6-6 countersunk rivets for installation on Hobie 17.
    MAIN TRAVELER TRACK (DEEP)
    Hobie
    Out of Stock
    H18/20 Updated Luff Track 12.5" Murrays Part# 50-50404101 Hobie® factory aluminum luff track update is 12-1/2" long The Hobie 20 need the extra strength to prevent the sail from pulling out of the luff track. The Hobie 18 uses this as an extension to the wave luff track, the extra strength is great but was not stock on the boat.
    H-18/20 UPDATED LUFF TRACK 12.5"
    Hobie
    Out of Stock
    H17 Updated Luff Track 14.8 Murrays Part# 50-50404111 Factory luff track update for Hobie® 17 measures 14.8" long.
    H-17 UPDATED LUFF TRACK
    Hobie
    Out of Stock
    H14 Roller Furling Jib Sail (White) Murrays Part# 30-5012 A roller furling jib adds safety, convenience and performance to your Hobie 14. Reduce sail area while sailing or furl your jib while beached. Dacron sailcloth in your choice of weight and solid colors; 4-oz. cloth offers a greater selection of colors than 6-oz. Viewing window is not included (order #30-5001). Order hardware kit #30-5015 separately.
    Wave Jib Sail (White) Murrays Part# 30-6004 The Hobie Wave Jib Sail - 5oz is an aftermarket 5-oz. Dacron jib sail for Hobie Wave is patterned after the factory sail. The base price is for white, but the jib is also available in a variety of colors for an additional charge. This sail is not Class legal for racing. The Hobie Wave Jib is an aftermarket add on and will require some extra rigging to install. They do not have battens and can be set up with a roller furling system.
    WAVE JIB SAIL (WHITE)
    Hobie
    Out of Stock
    Wave Jib Sail (White) Murrays Part# 50-38992010 White jib for the Hobie Wave catamaran. White 6 oz heavy duty Dacron sailcloth 25 square foot sail area
    WAVE JIB SAIL (WHITE)
    Hobie
    Recently viewed