Hobie Wave Rudder Parts

Hobie Wave Rudder Parts

66 products

The Hobie Wave has gone through a few rudder configurations.

H17 style rudder castings

- Elbow tiller connectors
-Fixed Miracle 20 Style Connectors
-Tendon style connectors

Ez Loc Rudder Castings (2005 and newer)
-Tendon Style Connectors
- EZ Loc Style Connectors

66 products

Sort

Hobie Wave EZ Loc Rudder Assembly

Murrays Part# 50-39312000

EZ Loc rudder assembly for the Hobie Wave.

Hobie Part# 39312000

WAVE EZ LOC RUDDER ASSEMBLY

HOBIE EPO3 RUDDER BLADE

H17/18/20 Upper Right Rudder Casting

Murrays Part# 50-50341001

Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation.
Hobie Part# 50341001

H-17/18/20 UPPER RIGHT RUDDER CASTING

H17/18/20 Lower Rudder Casting

Murrays Part# 50-50322001

Hobie® factory replacement lower rudder casting for Hobie® 17, 18, 20, Getaway and Wave. This casting does not fit Hobie® 14 or 16.

H-17/18/20 LOWER RUDDER CASTING

H17/18/20 Upper Rudder Casting
Murrays Part# 50-50321001

Hobie® factory replacement upper left rudder casting for Hobie® 17, 18, 20 or Wave. Use four 6-8 rivets (#19-5033) for installation.

H-17/18/20 UPPER RUDDER CASTING

Hobie 1953 tiller connection kit - new style

HOBIE TILLER CONNECTOR KIT

Fiberglass Tiller H14/16
Murrays Part# 50-20550001
84" Hobie Fiberglass Tiller Extension
The 84" Hobie Fiberglass Tiller Extension is the Hobie factory 84" fiberglass tiller extension with hinge for the Hobie 14 or 16. This stick can be cut to 60" for Getaway or Wave.

H-14/16 FIBERGLASS TILLER

Hobie Rudder Blade - White Nylon

Murrays Part# 50-20493000

The Hobie Rudder Blade - White Nylon is a solid molded white nylon rudder blade for use on virtually all Hobie Catamarans. Hobie factory nylon rudder blades are stock on Hobie 14, 16, 17, 18, 20 and Waves with pre-EZ Loc rudder systems. Hobie rudders are sold undrilled and we recommend that you use your old rudder as a template to drill your new rudder.

Hobie Part# 20493000

HOBIE RUDDER BLADE - WHITE NYLON

Rudder Blade EZ Lock With Indents

Murrays Part# 50-20491000

Hobie is no longer producing two different nylon rudder blades. Use this part to replace your plastic rudder blades for Hobie 14, 16, 17 and 18 beach cats. This is the standard part that comes on Hobie Wave and Hobie Getaway boats with EZ Loc rudder systems

RUDDER BLADE EZ LOCK WITH INDENTS

HOBIE WAVE EZ LOC TILLER CROSS BAR
Murrays PN 50-39524001
Hobie® factory replacement tiller crossbar assembly for Wave with EZ Loc rudder system.
Hobie part number 39524001

WAVE EASY LOC TILLER CROSS BAR

WAVE/GETAWAY TILLER CONNECTION KIT

Hobie EZ Loc Rudder Housing

50-50313001

EZ Loc Rudder Housing for Hobie Bravo

EZ Loc Rudder Housing for Hobie Getaway

EZ Loc Rudder Housing for Hobie Wave

Hobie part number 50313001

Fits Hobie Wave and Hobie Bravo and Hobie Getaway

HOBIE EZ LOC RUDDER HOUSING

Hobie Rudder Covers

Murrays PN 50-82420000

Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition).

These come as a pair.

Hobie part number 82420000

HOBIE RUDDER COVER

Aluminum Adjustable tiller extension for Hobie, Nacra and Prindle catamarans. Compare to Hobie 20550001 Hobie hot stick

Murrays Part# 001-0062
Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072
Applications: All Hobies and Prindles
Tiller Yoke Assembly: 1

TELESCPOING TILLER EXTENSION 50"-95"

WAVE TILLER ARM

Wave EZ Loc Tiller Arm

Murrays Part# 50-39382011

This is the current stock tiller arm for the Hobie Wave. It is part of the EZ Loc Assembly. This will not work with the older H18, H17, H20 Rudder casting system.

Hobie Part# 39382011

WAVE EZ LOC TILLER ARM

H17/18/20/21/Wave and Getaway
Rudder Cam Kit

Murrays Part# 001-3550

The Rudder Cam Kit: H17, H18, H20, H21, Wave, & Getaway are replacement rudder cams which help keep your Hobie’s rudder lock-down mechanism functioning properly. This kit includes sister screws to install the cams, making it easier to replace the cams. Purchase the complete kit if your boat has the stock flare pins; or you can purchase just the cams (#50-10480000 each) if your boat already has sister screws.

H-17/18/20/21/WAVE AND GETAWAY RUDDER CAM KIT

H14/16/18/20/Wave Rudder Cam Stop Plate

Murrays Part# 50-20352000

Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings).

Hobie Part# 20352000

H-14/16/18/20/WAVE RUDDER CAM STOP PLATE

Rudder Locking Kit Hobie 17, 18, 20, 21

Murrays Part# 001-3552

The Rudder Locking Kit Hobie 17, 18, 20, 21 includes the rudder spring, rudder casting screw, and the rudder plunger for the Hobie 17, 18, 20 and 21.

Delrin screw is 3/4-10 thread. In many cases you can drill it out with a 5/8" drill bit and then get a 3/4-10 tap to clear the threads.

H-17/18/20 and 21 RUDDER LOCKING KIT

EZ Lock Upper Pintle

Murrays Part# 50-90880211

Hobie® factory replacement upper pintle for EZ Loc rudder system.

Fits Hobie Bravo and Getaway boats

Hobie Part# 90880211

BRAVO/WAVE/GETAWAY EZ LOC UPPER PINTLE

Rudder Cam Screws H17, H18, H20,
Older Wave and Getaway
Murrays Part# 001-3551
The Murrays Rudder Cam Pins are a pair of sister screws for use on the Hobie 17, 18, 20, 21, as well as the older Hobie Wave and Getaway rudder cams. These pins are an upgrade form the original stock hollow flare rivet that came on the Hobie. The Sister Screws are much easier to install and remove, and they are reusable.
Compare to Hobie Cat® #5203 and #50312301.
Sold in pairs

H-17/18/20/OLDER WAVE AND GETAWAY RUDDER CAM PINS

EZ LOC UP-LOCK PIN KIT

Murrays PN 50-50314001

The EZ LOC UP-LOCK PIN KIT is the pin for locking Hobie Cat EZ Loc rudder system in up position during storage. EZ Loc up-lock pin kit is the pin, screw, split rings and lanyard for securing the EZ Loc rudder in the up position.

Hobie Part Number 50314001

HOBIE EZ LOC UP LOCK PIN KIT

TILLER ARM INSERT Hobie factory tiller arm insert for 1953 tiller kit. Hobie part number 40660001. Murrays.com In stock

HOBIE TILLER ARM INSERT

Hobie Wave Lower Pintle

Murrays Part# 50-38101401
Hobie® factory replacement lower pintle for Wave or Bravo or Getaway Pre-EZ Loc Rudder Systems. Lower pintle assembly for Hobie Wave sailboat.

Original Equipment on all Hobie Wave sailboats.
Lower pintle should be mounted with four (4) screws.
Use Part # 8030171 for boats 2008 and older, or Part # 8030331 for 2009 and newer.

Hobie Cat Part # 38101401

WAVE LOWER PINTLE

TILLER ARM SWIVEL END CAP Hobie factory tiller arm swivel end cap for Hobie 20 Miracle rudder system 1953. Hobie part number 40650001

TILLER ARM END CAP SWIVEL

Hobie Getaway Tiller Connector Screw

Murrays Part# 50-40530021

Hobie® factory replacement tiller connector screw for Club Wave.

Hobie Part# 40530021

GETAWAY TILLER CONNECTOR SCREW

Hobie Tendon Kit (Pre EZ Loc)

Murrays Part# 50-37561011

This tendon kit is the replacement for tendons used on the Hobie Wave, Hobie Getaway, and Hobie Bravo with the first generation EZ Loc rudders. This upgraded version is a notable improvement over the original tendons.

Hobie Part# 37561011

HOBIE TENDON KIT (PRE EZ LOC)

Tiller End Cap with Pin

Murrays Part# 50-37561203

Hobie® factory replacement tiller end cap with pin for '07 tiller connector.

Fits Hobie Getaway.

Hobie Part# 37561203

TILLER END CAP WITH PIN

Hobie Rudder Cam
Hobie part number 10480000
Hobie factory replacement cam. Rudder cams should be inspected and replaced periodically. Always replace cams that are bent out of shape.

Used on all Hobie Catamarans with metal housing rudder systems. Compatible on all Hobie 14, 16, 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.

Not compatible with the Hobie Wave and Getaway EZ Loc plastic rudder housing rudder system.

HOBIE RUDDER CAM

H18 Rudder Cam Pin

Murrays Part# 50-50312301

Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.

H-18 RUDDER CAM PIN

Hobie EZ Loc Lower Rudder Housing Tube Rivet

Murrays Part# 50-50313301

Rivet for the lower rudder housing on Hobie Bravo, Getaway and wave EZ Loc Systems. 

Hobie Part# 50313301

HOBIE EZ LOC LOWER RUDDER HOUSING TUBE RIVET

Hobie EZ Loc Rudder Linkage

Murrays Part# 50-50313201

Replacement rudder linkage for Hobie EZ Loc style rudder assemblies.

 Hobie Bravo, Getaway and Wave

Hobie Part# 50313201

HOBIE EZ LOC RUDDER LINKAGE

Hobie Wave Keeper Pin With Lanyard

Murrays Part# 50-38490011

Hobie® factory replacement keeper wire with pin for Wave and Getaway.

Hobie part# 38490011

WAVE KEEPER PIN WITH LANYARD

Detent Plunger EZ Lock System
Murrays Part# 50-20492021
Hobie Cat® factory detent plunger for EZ Loc rudder assembly.
Hobie Bravo, Getaway and Wave
Hobie Part# 20492021

BRAVO/WAVE/GETAWAY DETENT PLUNGER EZ LOC SYSTEM

Murrays Part# 50-10432000
Hobie® factory 2½" spring for Hobie® 16 lower rudder casting. This spring is longer and stiffer than original equipment (#50-10430000), providing additional tension if you are having trouble with rudder kick up.
Used on Hobie 18 Rudder Systems from late 80s through now.
Used on Hobie 16 Rudder Systems after 1983
Used on Hobie Getaway Rudder Systems pre- EZ Loc
Hobie part number 10432000

HOBIE RUDDER SPRING-LONG

Rudder Casting Lock Spring
Murray Part# 50-10430000
Hobie factory replacement 2-1/8" lock spring for rudder casting. Replace rudder springs with this original spring supplied on Hobie® 14, 16, (pre 1983) 17 and 18.
Compare to HC part number 10430000
H14, H16, H17, H18, H20

HOBIE RUDDER SPRING

Hobie 18 rudder plunger. Hobie Part number 50312201. Also use on the 17 as well as the older Wave and Getaway

H-17/18/GETAWAY RUDDER CAST PLUNGER

RUDDER CASTING DELRIN SCREW - rudder locking adjustment screw - 60450000

HOBIE DELRIN RUDDER SCREW

Hobie Tiller End Cap (Tendon Style)

Murrays Part# 50-37561001

Hobie® factory replacement tendon-style tiller end cap

Hobie Part# 37561001

HOBIE TILLER END CAP (TENDON STYLE)

Retainer Clip EZ Lock Rudder Housing

Murrays Part# 50-90880231

Retainer clip for Hobie Bravo EZ Loc Rudder Housing.

Hobie Part# 90880231

BRAVO RETAINER CLIP EZ LOCK RUDDER HOUSING

1 2 Next

Recently viewed

Hobie Wave Rudder Parts