Hobie Wave Rigging

Hobie Wave Rigging

23 products

    Running and Standing Rigging for your Hobie Wave

    23 products
    Harken 4:1 Mainsheet System
    Murrays Hobie wave main sheet system
    HARKEN 4:1 MAIN SHEET SYSTEM
    Harken
    Hobie Wave rigging kit, 2 shrouds, 2 bridles and a forestay
    HOBIE WAVE RIGGING KIT
    Murrays Sports
    The Murrays main halyard for Hobie Wave is constructed with 1/4" polyester yacht braid line and 316 stainless wire finished with a halyard shackle with a captured pin, Built to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie part number 38651001. 
    WAVE MAIN HALYARD
    Murrays Sports
    RONSTAN WAVE MAINSHEET BASE BLOCK
    Ronstan
    Out of Stock
    WAVE LINE PACKAGE
    Murrays Sports
    Out of Stock
    Wave Bridle with Hook 1/8" Discontinued by Hobie This item is not longer available from Hobie Hobie Part# 38822011
    WAVE BRIDLE WITH HOOK 1/8"
    Hobie
    Wave Trapeze Wire BK (2) The basic trapeze assembly is constructed to factory specifications and includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order shock cord and adjustment kits separately. A trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) may be added to wire with no installation charge! Check box when ordering and wire length will be adjusted accordingly.
    WAVE TRAPEZE BLACK WIRE (2)
    Murrays Sports
    Wave Shroud with Hook Murrays Part# 50-38790001 Hobie® factory replacement shroud with hook for Wave.
    WAVE SHROUD WITH HOOK
    Hobie
    Ronstan Wave Mainsheet Upper Block Murrays Part# 21-41500 The Hobie Wave Mainsheet Upper Block is a Ronstan Series 40 fiddle block with 40mm sheaves. Series 40 All Purpose Block, Fiddle All purpose fiddle block with universal head
    RONSTAN WAVE MAINSHEET UPPER BLOCK
    Ronstan
    Wave Shroud 1/8" Black Wire Murrays Part# 002-0804-02 Single black shroud (sidestay) for Hobie® Wave is constructed to factory specifications. Compare to Hobie Part# 39790001
    WAVE SHROUD 1/8" BLACK WIRE
    Murrays Sports
    Wave Forestay 1/8" Black Murrays Part# 002-0844-02 One black forestay for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® #39810001.
    WAVE FORESTAY 1/8" BLACK WIRE
    Murrays Sports
    Wave Bridle 1/8" Black Murrays Part# 002-0814-02 One black bridle for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® 39822011.
    WAVE BRIDLE 1/8" BLACK WIRE
    Murrays Sports
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2" WITH LANYARD
    Misc
    The Murrays Pins & Rings Kit: Hobie Wave + Getaway includes the most often used spare clevis pins and split rings for the Hobie Wave and Hobie Getaway. Compare to Hobie Part # 30302
    WAVE AND GETAWAY PINS & RINGS KIT
    Murrays Sports
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Shroud Stay Adjuster 7 Hole Murrays Part# 25-3310 Stainless steel shroud adjuster with seven 1/4" holes. ​Use #22-9802 clevis pin at top and #22-9808 at bottom. Fits: H14/16/18/20, Wave and Getaway. Compare to Hobie Part# 20830010
    SHROUD STAY ADJUSTER 7-HOLE
    Murrays Sports
    Harken 22mm Block Murrays Part# 28-0224 This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    Out of Stock
    Ronstan bow shackle measurements
    RONSTAN 1/4" BOW SHACKLE
    Ronstan
    Wind Vane Replacement Tips and Washers  Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly! 
    WIND VANE REPLACEMENT TIPS & WASHERS
    Murrays Sports
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    1/4 X 5/8" CLEVIS PIN
    Misc
    Clevis Pin 1/4X3/8 Murrays Part# 50-8020371 This is commonly used for Hobie Rigging parts. It has a 3/8" grip length. You can also use the 1/2" grip length pins also. Hobie Part# 8020371 or 8020370
    CLEVIS PIN 1/4 x 3/8"
    Hobie
    3/16 - 1/4" Split Ring Murrays Part# 22-9492 Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler Medium Split ring Dimensions: 5/8″ Diameter Material: 316 Stainless steel. This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
    3/16-1/4" SPLIT RING
    Misc
    Cotter Pin 3/32 X 3/4 Murrays Part# 19-1015 Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111. Stainless steel cotter pin measures 3/32" x 3/4".
    COTTER PIN 3/32 X 3/4" SS
    Misc
    Recently viewed