Hobie Wave Rigging

Hobie Wave Rigging

20 products

    Running and Standing Rigging for your Hobie Wave.

    20 products
    Harken 4:1 Mainsheet System
    Murrays Hobie wave main sheet system
    HARKEN 4:1 MAIN SHEET SYSTEM
    Harken
    Hobie Wave rigging kit, 2 shrouds, 2 bridles and a forestay
    HOBIE WAVE CLUB RIGGING KIT
    Murrays Sports
    The Murrays main halyard for Hobie Wave is constructed with 1/4" polyester yacht braid line and 316 stainless wire finished with a halyard shackle with a captured pin, Built to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie part number 38651001. 
    WAVE MAIN HALYARD
    Murrays Sports
    Hobie wave lower Mainsheet block
    Ronstan
    Out of Stock
    WAVE BRIDLE W/HOOK 1/8" BLACK
    Hobie
    Wave Trapeze Wire BK (2) The basic trapeze assembly is constructed to factory specifications and includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order shock cord and adjustment kits separately. A trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) may be added to wire with no installation charge! Check box when ordering and wire length will be adjusted accordingly.
    WAVE TRAPEZE BLACK WIRE (2)
    Murrays Sports
    Out of Stock
    WAVE SHROUD W/HOOK
    Hobie
    Hobie wave upper main sheet block
    Ronstan
    Wave Shroud 1/8" Black Wire Murrays Part# 002-0804-02 Single black shroud (sidestay) for Hobie® Wave is constructed to factory specifications. Compare to Hobie Part# 39790001
    WAVE SHROUD 1/8" BLACK WIRE
    Murrays Sports
    Wave Forestay 1/8" Black Murrays Part# 002-0844-02 One black forestay for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® #39810001.
    WAVE FORESTAY 1/8" BLACK WIRE
    Murrays Sports
    Wave Bridle 1/8" Black Murrays Part# 002-0814-02 One black bridle for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® 39822011.
    WAVE BRIDLE 1/8" BLACK WIRE
    Murrays Sports
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2 WITH LANYARD
    Misc
    The Murrays Pins & Rings Kit: Hobie Wave + Getaway includes the most often used spare clevis pins and split rings for the Hobie Wave and Hobie Getaway. Compare to Hobie Part # 30302
    Pins & Rings Kit: Hobie Wave, Getaway
    Murrays Sports
    Harken 22mm Block Murrays Part# 28-0224 This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    SHROUD STAY ADJUSTER 7-HOLE
    Murrays Sports
    1/4" Bow Shackle Ronstan PN RF635
    1/4" BOW SHACKLE
    Ronstan
    Wind Vane Replacement Tips and Washers  Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly! 
    WIND VANE REPLACEMENT TIPS & WASHERS
    Murrays Sports
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    CLEVIS PIN 1/4 X 5/8
    Misc
    CLEVIS PIN 1/4 x 3/8
    Misc
    Out of Stock
    3/16 - 1/4" Split Ring Murrays Part# 22-9492 Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler Medium Split ring Dimensions: 5/8″ Diameter Material: 316 Stainless steel. This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
    SPLIT RING 3/16-1/4"
    Misc