Hobie Wave Mast Parts

Hobie Wave Mast Parts

44 products

    Mast Parts for your Hobie Wave.

    44 products
    WAVE MAST ASSEMBLY 2PC 1438UP
    Hobie
    COMP TIP WAVE
    Hobie
    WAVE LOWER MAST
    Hobie
    The Hobie Baby Bob Mast Float is designed to offer the safety and security of mast head flotation with minimized drag through the air, the Baby Bob is fixed in position to the mast head with the included mounting hardware. The Baby Bob is standard on all Hobie Waves This float will also fit the Getaway and Hobie 16 with or without CompTip. Some drilling may be necessary. The larger Mama Bob (#07-30119) is also an option for most Hobies. The Baby Bob Mast Float displaces 32 pounds of water, is 20" long x 1
    MAST FLOAT WAVE BABY BOB
    Hobie
    H14/16 Mast Bearing (Pack of 100) Murrays Part# 001-2042 Teflon® mast bearings for Hobie® 14 or 16 are .06" thick and will form to mast base with first use. Package of 100 mast chips.
    H14/16 MAST BEARING (100-PKG)
    Murrays Sports
    Downhaul Kit 3:1 Wave Murrays Part# 001-2029 This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver. This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.
    Downhaul Kit 3:1 Wave Murrays Part# 001-2029 This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver. This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.
    WAVE DOWNHAUL KIT 3:1
    Murrays Sports
    Out of Stock
    Hobie 14 Comptip Masthead
    Hobie
    COMP-TIP LUFF TRACK (NO Hobie 16)87"
    Hobie
    The Murrays main halyard for Hobie Wave is constructed with 1/4" polyester yacht braid line and 316 stainless wire finished with a halyard shackle with a captured pin, Built to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie part number 38651001. 
    WAVE MAIN HALYARD
    Murrays Sports
    Out of Stock
    MAST BASE H14/WAVE BK
    Hobie
    Harken 396 - 29mm Harken 180 Pivoting Block with Carbo-Cam, downhaul, Hobie.
    HARKEN 29MM PIVOTING LEAD BLOCK-CARBO-CAM CLEAT
    Harken
    Out of Stock
    WAVE MAST BASE new S/N 1438 UP
    Hobie
    Downhaul Kit: H14/16 Murrays Part# 001-1028 This class legal 3:1 downhaul kit for Hobie® 14 or Hobie 16 includes Harken bullet block with becket and swivel, and 6 feet of 3/16" low-stretch, 8-strand line. This kit works with the stock downhaul horn cleat at the base of the mast. This is a fantastic economical and simple solution for the recreational sailor. Hobie part number 2081
    Downhaul Kit: H14/16 Murrays Part# 001-1028 This class legal 3:1 downhaul kit for Hobie® 14 or Hobie 16 includes Harken bullet block with becket and swivel, and 6 feet of 3/16" low-stretch, 8-strand line. This kit works with the stock downhaul horn cleat at the base of the mast. This is a fantastic economical and simple solution for the recreational sailor. Hobie part number 2081
    H-14/16 DOWNHAUL KIT
    Murrays Sports
    H14 Mast Spinnaker Tang Murrays Part# 50-10690000 Hobie® factory replacement spinnaker tang or mast tang for Hobie 14 or Wave. Use six 6-4 rivets (#19-5031) and six 6-4 casings (#19-5020) for installation.
    H-14 MAST SPINNAKER TANG
    Hobie
    The Murrays Pins & Rings Kit: Hobie Wave + Getaway includes the most often used spare clevis pins and split rings for the Hobie Wave and Hobie Getaway. Compare to Hobie Part # 30302
    HOBIE, WAVE AND GETAWAY PINS AND RINGS KIT
    Murrays Sports
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16 BOWSHACKLE WITH HOLE
    Ronstan
    MAIN HALYARD HOOK: H-14/16
    Hobie
    Harken 22mm Block Murrays Part# 28-0224 This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    Mast Float Mount Plate Murrays Part# 50-39640020 Mast float plate for the Hobie Baby Bob and the Mama Bob. Sold individually Hobie Part# 39640020
    MAST FLOAT MOUNT PLATE
    Hobie
    Ronstan S-Hook, 8mm (5/16") Murrays Part# 21-0049 The Ronstan 8mm S-Hook features a closed eye and long return leg to ensure a positive attachment and avoid accidental release. 316 Stainless Steel, 8mm diameter bar Ronstan Part# RF49
    RONSTAN S-HOOK, 8MM (5/16")
    Ronstan
    Halyard Cleat Kit with Rivets Murrays Part# 001-1019 The Murrays Halyard Cleat Kit with Rivets pulls the halyard out of the way to keep the battens from hanging up on the halyard of an H16. The kit includes the halyard cleat and sealed stainless rivets. Center-to-center hole spacing is 31mm. *Photo is out of date and kit no longer comes with casings as the rivets that are included come sealed. Compare to Hobie Cat Part 10730000
    HALYARD CLEAT KIT WITH RIVETS
    Murrays Sports
    Downhaul Cleat with Screws Murrays Part# 001-1020 The Downhaul Cleat Kit is for mounting in mast track (such as Hobie 16) and includes cleat, screws and channel inserts. Center-to-center hole spacing is 1-1/8". We have another kit for the halyard cleats on the side of the mast that includes rivets.
    DOWNHAUL CLEAT WITH SCREWS
    Murrays Sports
    Out of Stock
    Comp-Tip Mast Head Sheave for H16 Wave Murrays Part# 50-20614210 CompTip Mast Head Sheave for Hobie 16 or Wave, is the sheave found at the top of the comptip assembly. Two sheaves are used in each assembly. The sheaves each ride on a, comptip sheave spacer. The sheave is 9/16" wide x 2 1/4" diameter with 3/8" hole. The larger sheave for the obsolete mast head for all-aluminum mast is no longer available. Hobie Part number 20614210
    COMP-TIP MAST HEAD SHEAVE FOR H-16 & WAVE
    Hobie
    Hobie 16 mast bearings. Teflon mast chips, Hobie part number 11110005
    Hobie mast chips - 11110005
    H-14/16 MAST BEARING (3-PKG)
    Murrays Sports
    Mast Cleat Murrays Part# 011-6481 The Mast Cleat is a can be used as a downhaul / halyard cleat on a Hobie 14 and or 16. Compare to Hobie Cat® factory item #10730000. 31mm Center to Center.
    MAST CLEAT - 10730000
    Murrays Sports
    Mast Step Pin Wave/Getaway .25 x 2" Detent Murrays Part# 50-8020451 Replacement mast step pin / mast hinge pin for a Hobie Wave and Getaway. 1/4" x 2" detent pin.   Hobie part # 8020451
    MAST STEP DETENT PIN .25x2"
    Hobie
    Out of Stock
    H14 Hobie 16 Foam plug for pylon
    Hobie
    Out of Stock
    Hobie 16 Masthead Sheave Spacer
    Hobie
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    CLEVIS PIN 1/4 X 5/8
    Misc
    Clevis Pin 1/4X3/8 Murrays Part# 50-8020371 This is commonly used for Hobie Rigging parts. It has a 3/8" grip length. You can also use the 1/2" grip length pins also. Hobie Part# 8020371 or 8020370
    CLEVIS PIN 1/4 x 3/8
    Hobie
    Out of Stock
    DECAL MAST CAUTION BLACK
    Hobie
    Decal Mast Caution Orange Murrays Part# 13440010 Hobie® factory decal attaches to mast as a reminder to watch for overhead power lines when sailing and/or launching your boat. Hobie Part# 13440010
    DECAL MAST CAUTION ORANGE
    Hobie
    Rivet MSP 6-10 3/16 X 5/8" PH Murrays Part# 19-5023 Rounded pan head 3/16" x 5/8" Monel rivet. Compare to Hobie Cat® Part# 8010121
    RIVET MSP 6-10 3/16 X 5/8" PH
    Hobie
    Sealed Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Sealed Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231 Rivet and Hobie Cat® #8011291 rivet casing.
    RIVET CCP SEALED 6-8 (3/16 X 1/2)
    Misc
    Sealed Stainless Steel 3/16" x 3/8" Pan Head Rivet Murrays Part# 19-5032S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified: Hobie 14 (2) or 16 (4) mast head Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4) Hobie 14/16
    RIVET CCP SEALED 6-6 (3/16 X 3/8)
    Misc
    Rivet MCP 6-6 (3/16 X 3/8) Murrays Part# 19-5022 Rounded pan head 3/16" x 3/8" Monel rivet. Compare to SS version Hobie Cat® #8010131.
    RIVET MCP 6-6
    Hobie
    Hobie rivet casings sleeves seal rivets to prevent water penetration. When used with a rivet they seal the hole to prevent water from getting through the center of the rivet. Rivet Casings are recommended for use on all rivets on the mast to keep the mast water tight. Compatible with all 3/16 diameter rivets up to 5/8" long. Compatible with all rivets on Hobie, Nacra and Prindle catamarans except traveler tracks. Requires 13/64" hole. Hobie part number 8011291, 8011290, also called rivet cap.
    RIVET CASING 6-10(3/16 X 5/8)
    Hobie
    Rivet CCP 6-10 (3/16 X 5/8) Murrays Part# 19-5034 Stainless steel 3/16" x 5/8" rounded pan head rivet. Compare to Hobie Cat® #8010121. Halyard mast cleat rivet
    RIVET CCP 6-10 (3/16 X 5/8)
    Misc
    RIVET CCP 6-6 (3/16 X 3/8) Murrays Part# 19-5032 Stainless steel 3/16" x 3/8" pan head rivet Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified: Hobie 14 (2) or 16 (4) mast head Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4) Hobie 14/16 rudder upper casting (2) Hobie 14/16 tiller end cap (2) Hobie 14/16 boom front end cap (3) Pair with stainless steal rivet casings to seal the holes when using on the mast.
    RIVET CCP 6-6 (3/16 X 3/8)
    Hobie
    Nut Nylock 5/16-18 Stainless Steel Murrays Part# 19-2520 5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut Used with Hobie Getaway Bow Tang Bolt
    NUT NYLOCK 5/16-18 (SS)
    Misc