Hobie Wave Hull Parts

Hobie Wave Hull Parts

23 products

    23 products
    Out of Stock
    Bow Spreader Pole Wave Murrays Part# 50-38999021 Hobie® factory replacement bow spreader pole only for Wave. Hobie Part# 38999021
    BOW SPREADER POLE WAVE
    Hobie
    Out of Stock
    TRAMP TRACK WAVE CLUB
    Hobie
    HOBIE WAVE SEAT PAD
    Murrays Sports
    Hobie Wave Bow Spreader Tang Murrays Part# 50-38120041 Replacement tang for Hobie Wave bow spreader. Hobie Part# 38120041
    HOBIE WAVE BOW SPEADER TANG
    Hobie
    EZ Lock Upper Pintle Murrays Part# 50-90880211 Hobie® factory replacement upper pintle for EZ Loc rudder system. Fits Hobie Bravo and Getaway boats Hobie Part# 90880211
    EZ LOCK UPPER PINTLE
    Hobie
    EZ Lock Lower Pintle Murrays Part# 50-90880221 Hobie® factory replacement lower pintle for EZ Loc rudder system. Fits Hobie Bravo, wave and Getaway boats Hobie Part# 90880221
    EZ LOCK LOWER PINTLE
    Hobie
    Hobie Pre EZ Loc Upper Pintle Murrays Part# 50-38101301 Replacement upper pintle assembly for Hobie Wave and Hobie Getaway sailboats using the pre EZ loc style rudder assembly. Original Equipment on Hobie Wave and Hobie Getaway sailboats Upper pintle should be mounted with two (2) screws Use Part# 8030171 for boats 2008 and older, or Part# 8030331 for 2009 and newer If you have an EZ Loc style assembly, use the Hobie EZ loc upper pintle part# 90880211 Hobie Cat Part # 38101301
    HOBIE PRE EZ LOC UPPER PINTLE
    Hobie
    Hobie Wave Lower Pintle Murrays Part# 50-38101401 Hobie® factory replacement lower pintle for Wave or Bravo or Getaway Pre-EZ Loc Rudder Systems. Lower pintle assembly for Hobie Wave sailboat. Original Equipment on all Hobie Wave sailboats. Lower pintle should be mounted with four (4) screws. Use Part # 8030171 for boats 2008 and older, or Part # 8030331 for 2009 and newer. Hobie Cat Part # 38101401
    HOBIE WAVE LOWER PINTLE
    Hobie
    Hobie Wave Keeper Pin With Lanyard Murrays Part# 50-38490011 Hobie® factory replacement keeper wire with pin for Wave and Getaway. Hobie part# 38490011
    HOBIE WAVE KEEPER PIN WITH LANYARD
    Hobie
    Eyestrap Wave Bridle Murrays Part# 50-38120011 ​Hobie® factory replacement eyestrap for Hobie Wave bridle.
    HOBIE WAVE BRIDLE EYESTRAP
    Hobie
    Hobie Wave/Getaway Shroud Anchor Plate Murrays Part# 50-39100011 Hobie® factory replacement shroud anchor chain plate for Club Wave or Getaway. The Club Wave has a three-piece trampoline and shrouds and bridles connect with clevis pins. Current boats use two plates per side. Hobie Part# 39100011
    HOBIE WAVE/GETAWAY SHROUD ANCHOR PLATE
    Hobie
    H19/20 Drain Plug Washer Murrays Part# 50-91281000 Hobie® factory drain plug with washer fits Hobie 20, Wave Classic/SE with serial number 1973 or less, and Holder 1-9. Hobie Part# 91281000
    H-20 DRAIN PLUG WITH WASHER
    Hobie
    MURRAYS HOBIE 20 DRAIN PLUG
    MURRAYS H-20 DRAIN PLUG
    Hobie
    Quick Release Pin Detent 1/4 X 1" Murrays Part# 18-4D100 This quick pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measures 1/4" diameter x 1" long. Can be used to replace 1/4" clevis pins up to 1" long.  Not recommended for use in shroud adjusters or chain plates.
    QUICK RELEASE PIN DETENT 1/4 X 1"
    Misc
    Out of Stock
    H14 Hobie 16 Foam plug for pylon
    Hobie
    Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000
    Hobie drain plug 10091000 Hobie 18
    DRAIN PLUG WITH GASKET
    Misc
    Hobie Wave Hull Seal Cap Murrays Part# 50-38370001 Hobie® factory replacement hull seal for under the seat pad on Wave. Hobie Part# 38370001
    HOBIE WAVE HULL SEAL CAP
    Hobie
    Screw 12x24x1 Pan Head (Long Lock) Murrays Part# 50-8030402 This screw is used to hold the rudder gudgeons on the back of the boat.  Hobie Part# 8030402
    SCREW 12x24x1 PAN HEAD (LONG LOCK)
    Hobie
    Rivet MSP 6-10 3/16 X 5/8" PH Murrays Part# 19-5023 Rounded pan head 3/16" x 5/8" Monel rivet. Compare to Hobie Cat® Part# 8010121
    RIVET MSP 6-10 3/16 X 5/8" PH
    Hobie
    Screw 1/4-20 x 5/8 PHMS-P Stainless Steel Murrays Part# 50-8030331 This screw is used on the Hobie wave to secure the eye straps to the inner edge of the crossbars for connecting the tramp pulleys on the classic wave or "other" on the club version.
    SCREW 1/4-20 x 5/8 PHMS-P SS
    Hobie
    Rivet CCP 6-10 (3/16 X 5/8) Murrays Part# 19-5034 Stainless steel 3/16" x 5/8" rounded pan head rivet. Compare to Hobie Cat® #8010121. Halyard mast cleat rivet
    RIVET CCP 6-10 (3/16 X 5/8)
    Misc
    Nut Nylock 5/16-18 Stainless Steel Murrays Part# 19-2520 5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut Used with Hobie Getaway Bow Tang Bolt
    NUT NYLOCK 5/16-18 (SS)
    Misc
    Cotter Pin 3/32 X 3/4 Murrays Part# 19-1015 Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111. Stainless steel cotter pin measures 3/32" x 3/4".
    COTTER PIN 3/32 X 3/4" SS
    Misc