Hobie Miracle 20 Sails and Accessories

22 products

    22 products
    Out of Stock
    SAIL JIB H20 6oz DAC WHT
    Murrays Sports
    Out of Stock
    H20 Main Sail Batten Set Murrays Part# 50-42000001 Hobie® factory replacement batten set for the Hobie 20 Stock batten lengths: #8 (top) 31" #7 47" #6 60" #5 76" #4 87" #3 93.5" #2 97" #1 (bottom) 96"
    H-20 MAIN BATTEN SET
    Hobie
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat Murrays Part# 28-2139 Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2-1/4" Length: 4-15/16" Weight: 9 oz Shackle pin diameter: 3/16" Maximum line diameter: 3/8" Maximum working load: 600 lb. Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    Murrays Deluxe Sail and Boom Bag - Will fit any Hobie sail, compatible with all Nacra and Prindle sails as well. The Hobie 16 has the widest sail of any Hobie and at a width of 109″
    Murrays Deluxe Sail and Boom Bag - Will fit any Hobie sail, compatible with all Nacra and Prindle sails as well. The Hobie 16 has the widest sail of any Hobie and at a width of 109″
    Murrays Deluxe Sail and Boom Bag
    Murrays Sports
    SAIL & BOOM BAG "Big Dryer"
    Murrays Sports
    Out of Stock
    SAIL AND BOOM BAG STANDARD
    Hobie
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 107"
    Murrays Sports
    Out of Stock
    Twist Shackle For Hobie Halyard
    Hobie
    Jib Clew Pigtail Kit Murrays Part# 001-4015 Easy-connect Dyneema® jib clew pigtail. Speed up tacks and improve sail shape by moving jib clew blocks away from the jib clew. Color may vary from picture. Features: jib Clew Pigtails move jib clew blocks about 14" from jib clew— saves 4 feet of sheeting/unsheeting per tack! "Locked" eye splices— jib blocks cannot slip or un-tie. Save weight (only 2.4oz) and move weight away from jib clew— better sail shape in light wind. Lightweight, easy-connect—
    JIB CLEW PIGTAIL KIT
    Murrays Sports
    SAIL LOGO HOBIE Flying H
    Hobie
    H-18/20 JIB HALYARD W/CLIP
    Murrays Sports
    Harken 29mm Bullet Block Murrays Part# 28-0082 Medium-size Harken single bullet block with Delrin® ball bearings works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads.
    HARKEN 29MM BULLET BLOCK
    Harken
    3/4" ADJUSTABLE FOAM LEECH CAPS (10)
    Tren-Tec
    Harken 22mm Block Murrays Part# 28-0224 This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    CLAMCLEAT LEECH LINE CL212
    Clamcleat
    1/4" Bow Shackle Ronstan PN RF635
    1/4" BOW SHACKLE
    Ronstan
    Hobie Cat #80550005 Main sail batten pocket protector kit. Hobie, Nacra, Prindle.
    SAIL POCKET PROTECTOR KIT MAIN
    Murrays Sports
    Wind Vane Replacement Tips and Washers  Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly! 
    WIND VANE REPLACEMENT TIPS & WASHERS
    Murrays Sports
    CLEVIS PIN 1/4 X 1-3/8"
    Misc
    Batten Cap Leech Adjustable Foam 3/4" Murrays Part# 012-4080-1 Glue this adjustable 3/4" x 5/16" end cap onto any solid epoxy or foam batten. Batten may need to be modified slightly to ensure a good fit. Sold individually
    3/4" ADJUSTABLE FOAM BATTEN CAP (EA)
    Tren-Tec
    3/16 - 1/4" Split Ring Murrays Part# 22-9492 Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler Medium Split ring Dimensions: 5/8″ Diameter Material: 316 Stainless steel. This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
    SPLIT RING 3/16-1/4"
    Misc
    Rivet 3/16 x 5/16 Aluminum Murrays Part# 50-8010071 Hobie® factory aluminum 3/16" x 5/16" rivet. A rivet tool is required for installation.
    RIVET 3/16X 5/16 ALUM
    Misc