Hobie Miracle 20 Rudder Parts

61 products

    61 products
    HOBIE EPO3 RUDDER BLADE
    Hobie
    H17/18/20 Upper Right Rudder Casting Murrays Part# 50-50341001 Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation. Hobie Part# 50341001
    H-17/18/20 UPPER RIGHT RUDDER CASTING
    Hobie
    Out of Stock
    H17/18/20 Lower Rudder Casting Murrays Part# 50-50322001 Hobie® factory replacement lower rudder casting for Hobie® 17, 18, 20, Getaway and Wave. This casting does not fit Hobie® 14 or 16.
    H17/18/20 LOWER RUDDER CASTING
    Hobie
    Out of Stock
    H17/18/20 Upper Rudder Casting Murrays Part# 50-50321001 Hobie® factory replacement upper left rudder casting for Hobie® 17, 18, 20 or Wave. Use four 6-8 rivets (#19-5033) for installation.
    H-17/18/20 UPPER RUDDER CASTING
    Hobie
    POWERSTICK TELESCOPING CARBON TILLER 62-115" - YOKE STYLE
    Murrays Sports
    PowerStick Telescoping Carbon Tiller Extension 64-115" The PowerStick Telescoping Carbon Tiller Extension is a strong, ultra lightweight, adjustable length tiller. Ideal for use on all Hobie, Prindle and Nacra catamarans, as well as A-Cats, Corsair and Farrier Trimarans. The Powerstick locks by twisting the grip either direction. It is possible to twist the grip 360 past the locking point which is great if you forget which direction you locked it in. The locking action is smooth and grips
    POWERSTICK TELESCOPING CARBON TILLER EXTENTION 62-115" - UNIVERSAL TENDON
    Murrays Sports
    Hobie Lower Rudder Casting H18/ H20/ H17
    Hobie
    Hobie 1953 tiller connection kit - new style
    H-20 TILLER CONNECTOR
    Hobie
    Out of Stock
    H20 Tiller Crossbar Murrays Part# 50-40521001 Hobie® factory replacement tiller crossbar for Hobie® 20.
    H-20 TILLER CROSSBAR
    Hobie
    Out of Stock
    Hobie Rudder Blade - White Nylon Murrays Part# 50-20493000 The Hobie Rudder Blade - White Nylon is a solid molded white nylon rudder blade for use on virtually all Hobie Catamarans. Hobie factory nylon rudder blades are stock on Hobie 14, 16, 17, 18, 20 and Waves with pre-EZ Loc rudder systems. Hobie rudders are sold undrilled and we recommend that you use your old rudder as a template to drill your new rudder. Hobie Part# 20493000
    HOBIE RUDDER BLADE - WHITE NYLON
    Hobie
    84" Murrays Fiberglass Tiller Extension Murrays Part# 001-1320 The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by an A Fleet Racer looking for a lighter more economic alternative. Murrays helped get them into production and here they are! Features: 5/8" diameter black fiberglass tube Hobie yoke base, same as the Hobie version 16" grip on the top 84" fixed length Weight: 3/4 lb.
    Murrays 84" Fiberglass Tiller Extension
    Murrays Sports
    Hobie Rudder Covers Murrays PN 50-82420000 Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition). These come as a pair. Hobie part number 82420000
    HOBIE RUDDER COVER
    Hobie
    Out of Stock
    DAGGERBOARD POS HOLDING SYS
    Hobie
    H17/18/20/21/Wave and Getaway Rudder Cam Kit Murrays Part# 001-3550 The Rudder Cam Kit: H17, H18, H20, H21, Wave, & Getaway are replacement rudder cams which help keep your Hobie’s rudder lock-down mechanism functioning properly. This kit includes sister screws to install the cams, making it easier to replace the cams. Purchase the complete kit if your boat has the stock flare pins; or you can purchase just the cams (#50-10480000 each) if your boat already has sister screws.
    H-17/18/20/21/WAVE AND GETAWAY RUDDER CAM KIT
    Murrays Sports
    H20 Gudgeon Murrays Part# 50-40101301 Hobie 20 replacement gudgeon for the Hobie® 20. Use #12-24 x 1" PPHMS-P screws and 12-24 nylock hex nuts. Hobie Part# 40101301
    H-20 GUDGEON
    Hobie
    Out of Stock
    H20 Tiller Arm Murrays Part# 50-40380011 Hobie® factory replacement tiller arm for Hobie® 20.
    H-20 TILLER ARM
    Murrays Sports
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
    Misc
    H14/16/18/20/Wave Rudder Cam Stop Plate Murrays Part# 50-20352000 Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings). Hobie Part# 20352000
    H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
    Hobie
    Hobie factory replacement part for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40540000 and 40540001. Murrays.com - in stock
    HOBIE THREADED TILLER CONNECTOR ADJUSTER
    Hobie
    H20 Rudder Bumper Murrays Part# 006-190807 The Rudder Bumper Hobie 20 is the wedge that mounts under the the lower casting on a Hobie 20 to prevent the rudders from turning too far into the hull and risking the tiller x-bar inverting. This also prevents stress on the hulls from the rudder casting slamming into it. This part mounts with a bolt and nut rather than a course thread screw like the original part.
    H-20 RUDDER BUMPER
    Murrays Sports
    Rudder Locking Kit Hobie 17, 18, 20, 21 Murrays Part# 001-3552 The Rudder Locking Kit Hobie 17, 18, 20, 21 includes the rudder spring, rudder casting screw, and the rudder plunger for the Hobie 17, 18, 20 and 21. Delrin screw is 3/4-10 thread. In many cases you can drill it out with a 5/8" drill bit and then get a 3/4-10 tap to clear the threads.
    RUDDER LOCKING KIT - H-17/18/20 and 21
    Murrays Sports
    Rudder Cam Screws H17, H18, H20, Older Wave and Getaway Murrays Part# 001-3551 The Murrays Rudder Cam Pins are a pair of sister screws for use on the Hobie 17, 18, 20, 21, as well as the older Hobie Wave and Getaway rudder cams. These pins are an upgrade form the original stock hollow flare rivet that came on the Hobie. The Sister Screws are much easier to install and remove, and they are reusable. Compare to Hobie Cat® #5203 and #50312301. Sold in pairs
    H-17/18/20/OLDER WAVE AND GETAWAY RUDDER CAM PINS
    Murrays Sports
    TILLER ARM INSERT Hobie factory tiller arm insert for 1953 tiller kit. Hobie part number 40660001. Murrays.com In stock
    HOBIE TILLER ARM INSERT
    Hobie
    Out of Stock
    H20 Rudder Pin Murrays Part# 50-40880011 5/16" x 9-1/4" end-to-end, with 3/32" hole at each end. Cotter pins sold separately (#19-1015 3/32" x 3/4" each). *****If your Hobie 20 has one piece rudder gudgeons, like H18, these pins will not fit.******
    H-20 RUDDER PIN (EACH)
    Hobie
    TILLER ARM SWIVEL END CAP Hobie factory tiller arm swivel end cap for Hobie 20 Miracle rudder system 1953. Hobie part number 40650001
    TILLER ARM END CAP SWIVEL
    Hobie
    Hobie® factory replacement part for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40550001. Murrays.com - In stock
    HOBIE THREADED TILLER CONNECTOR END CAP 1953
    Hobie
    Hobie® factory replacement end cap for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40561001 and 40561000
    H20-1995 & LATER TILLER CONNECTOR END CAP
    Hobie
    Hobie Rudder Cam Hobie part number 10480000 Hobie factory replacement cam. Rudder cams should be inspected and replaced periodically. Always replace cams that are bent out of shape. Used on all Hobie Catamarans with metal housing rudder systems. Compatible on all Hobie 14, 16, 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models. Not compatible with the Hobie Wave and Getaway EZ Loc plastic rudder housing rudder system.
    HOBIE RUDDER CAM
    Hobie
    H18 Rudder Cam Pin Murrays Part# 50-50312301 Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
    H-18 RUDDER CAM PIN
    Hobie
    Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1
    TILLER YOKE ASSEMBLY WITH SPACERS
    Murrays Sports
    H20 Lower Rudder Slack Bushing Murrays Part# 50-40360001 This is the lower bushing for the Hobie Miracle 20 rudder casting. This uses the 5/16" stock rudder pins. Compare to Hobie Part# 40360001
    H-20 LOWER RUDDER SLACK BUSHING
    Murrays Sports
    Murrays Part# 50-10432000 Hobie® factory 2½" spring for Hobie® 16 lower rudder casting. This spring is longer and stiffer than original equipment (#50-10430000), providing additional tension if you are having trouble with rudder kick up. Used on Hobie 18 Rudder Systems from late 80s through now. Used on Hobie 16 Rudder Systems after 1983 Used on Hobie Getaway Rudder Systems pre- EZ Loc Hobie part number 10432000
    HOBIE RUDDER SPRING-LONG
    Hobie
    HOBIE TILLER EXT BUSHING Murrays Part# 50-40300001 This is the bushing that goes into the tiller crossbar of most Hobiecat Sailboats. This part was discontinued or otherwise no longer available as a separate part. Compare to Hobie part# 40600001
    HOBIE TILLER BUSHING EXTENDER
    Murrays Sports
    Hobie 20-style factory tiller connector post. Part of the Hobie 1953 tiller connection system. Hobie part number 40530000 and 40530001
    H-20 TILLER CONNECTOR POST
    Hobie
    H20 Upper Rudder Slack Bushing Murrays Part# 50-40340001 This is the upper bushing for the Hobie Miracle 20 rudder casting. This uses the 5/16" stock rudder pins. Hobie Part# 40340001
    H-20 UPPER RUDDER SLACK BUSHING
    Hobie
    Hobie 18 rudder plunger. Hobie Part number 50312201. Also use on the 17 as well as the older Wave and Getaway
    H-17/18/GETAWAY RUDDER CAST PLUNGER
    Hobie
    Rudder Casting Lock Spring Murray Part# 50-10430000 Hobie factory replacement 2-1/8" lock spring for rudder casting. Replace rudder springs with this original spring supplied on Hobie® 14, 16, (pre 1983) 17 and 18. Compare to HC part number 10430000 H14, H16, H17, H18, H20
    HOBIE RUDDER SPRING
    Murrays Sports
    RUDDER CASTING DELRIN SCREW - rudder locking adjustment screw - 60450000
    HOBIE DELRIN RUDDER SCREW
    Hobie
    Rudder Stiffening Kit Murrays Part# 001-2053 The Rudder Stiffening Kit for all Hobies eliminates excessive clearances between rudders and castings which cause wobble and thwart rudder alignment. Kit has 4 stainless nylock nuts and 8 spacers. Compare to Hobie Cat® item #136.
    RUDDER STIFFENING KIT
    Murrays Sports
    Screw Delrin 3/8-16 X .75" Murrays Part# 50-8032001 Hobie® factory replacement 3/8-16 x 3/4" Delrin screw is used as rudder rake adjustment screw on Pre-EZ Lock Rudder System. Hobie Part# 8032001
    SCREW DELRIN 3/8-16 X .75"
    Hobie