Hobie Miracle 20 Rigging

43 products

    43 products
    Out of Stock
    ROLLER FURLING KIT H20
    Murrays Sports
    Out of Stock
    HOBIE ROLLER FURLER DRUM ASSEMBLY
    Hobie
    Oxen self-holding blocks offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use.
    Oxen block with becket - Hobie, Nacra, Prindle, jib sheet, main sheet
    OXEN 3" BLOCK W/PIN & BECKET
    Oxen
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat Murrays Part# 28-2139 Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2-1/4" Length: 4-15/16" Weight: 9 oz Shackle pin diameter: 3/16" Maximum line diameter: 3/8" Maximum working load: 600 lb. Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    Ronstan Series 55 Orbit Block, Ratchet with Becket and Cam Cleat Murrays Part# 21-56130 The Ronstan Orbit 55 Jib Block Ratchet Orbit Block™ has the highest holding power available and is ideal as a jib sheet cleat for the Hobie® 18, Hobie® 20, etc. The automatic ratchet mechanism engages when load is applied, but switches off when it's released.
    RONSTAN SERIES 55 ORBIT BLOCK, RATCHET WITH BECKET AND CAM CLEAT
    Ronstan
    H20 Diamond Wire Double without Turnbuckle Murrays Part# 002-0795-20 Diamond wire double (includes both sides) for Hobie® 20 is constructed to factory specifications. Without turnbuckle. Compare to Hobie Cat® Part# 41750001
    H-20 DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE
    Murrays Sports
    Hobie 20 TRAPEZE WIRE 40504501
    H-20 DOUBLE TRAPEZE (4)
    Murrays Sports
    H20 Upper Forestay 5/32" Black Wire with Roller Furling Murrays Part# 002-0735-02 Black upper forestay for Hobie® 20 with roller furling setup. Constructed to factory specifications. Compare to Hobie Cat® Part# 40810011
    H-20 UPPER FORESTAY 5/32" BLACK WIRE WITH ROLLER FURLING
    Murrays Sports
    H20 Forestay 5/32" Black Wire with 5/16 Stud Murrays Part# 002-0745-82 Lower forestay with 5/16" stud for Hobie® 20 is constructed to factory specifications.  Compare to Hobie Cat® Part# 40822121
    H-20 FORESTAY 5/32" BLACK WIRE WITH 5/16" STUD
    Murrays Sports
    H20 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-0705-12 Single shroud (sidestay) for Hobie® 20 is constructed to factory specifications. Hydraulic swaging produces a cleaner, stronger shroud than standard double swaging. Compare to Hobie Cat® Part# 40792001
    H-20 SHROUD 5/32" BLACK WIRE ROLLER SWEGED
    Murrays Sports
    H20 Forestay Roller Furling 5/32" Black Wire Murrays Part# 002-0745-32 Lower forestay for Hobie® 20 with roller furling setup. Constructed to factory specifications.  Compare to Hobie Cat® Part# 48814001
    H-20 FORESTAY ROLLER FURLING 5/32" BLACK WIRE
    Murrays Sports
    H20 Bridle 5/32" Black Wire Murrays Part# 002-0715-22 One bridle for Hobie® 20 is constructed to factory specifications.  Compare to Hobie Cat® Part# 40822001
    H-20 BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    JIB HALYARD BLOCK ASSY HOBIE 16/18
    Hobie
    H20 Jib Halyard with Shackle Murrays Part# 002-0783-50 Jib halyard with shackle for Hobie® 20 is constructed to factory specifications. Compare to Hobie Cat® Part# 41661001
    H-20 JIB HALYARD WITH SHACKLE
    Murrays Sports
    H20 Jib Halyard Roller Furling Murrays Part# 002-0786-00 Jib halyard for Hobie® 20 with roller furling is constructed to factory specifications. Order 24' of #39-0221 1/8" Dacron line for jib halyard line. Compare to Hobie Cat® Part# 48661001
    H-20 JIB HALYARD ROLLER FURLING
    Murrays Sports
    Out of Stock
    Harken Sail Chafe Protector Murrays Part# 28-0285 Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18
    HARKEN SAIL CHAFE PROTECTOR (2)
    Harken
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    Out of Stock
    H-20 JIB BLOCK WIRE (BARBERHLR)
    Murrays Sports
    Main Halyard Ring (Murrays) Murrays Part# 001-4216 If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Hobie Aussie Ring (#07-3064). This item replaces discontinued Part
    MAIN HALYARD RING (MURRAYS)
    Sailing
    trapeze adjustment kit - 3102 - Murrays EZ Up Trap Kit
    EZ-UP TRAP KIT: NO-CUT (PR)
    Murrays Sports
    Trap Shock Cord Kit: H20 Murrays Part# 001-0131 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. Our shock cord kit comes with one plastic carbine hook installed; the other hook is installed after lacing shock cord through trampoline grommets. Kit includes two lengths of 1/4" shock
    TRAP SHOCK CORD KIT H-20
    Murrays Sports
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2 WITH LANYARD
    Misc
    H-18/20 JIB HALYARD W/CLIP
    Murrays Sports
    Shroud Adjuster Covers 11″ Pair are vinyl covers that protect the crew from metal shroud adjusters and can prevent de-masting by protecting the split rings. Includes two adjuster covers, one for each side of the boat.
    SHROUD ADJUSTER COVERS 11"
    Murrays Sports
    10 Hole Hobie shroud adjuster
    SHROUD STAY ADJUSTER 10-HOLE
    MISC
    Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole Murrays Part# 21-0636 The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081. Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
    RONSTAN STAINLESS STEEL BOW SHACKLE, 5/16" PIN, COINED HEAD WITH HOLE
    Ronstan
    Harken 22mm Block Murrays Part# 28-0224 This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    Out of Stock
    TOGGLE H20 JIB HALYRD SWVL
    Murrays Sports
    RF DRUM FORESTAY ADJUSTER
    Hobie
    DIAMOND WIRE ROLLER
    MISC
    ELONGATED TRAPEZE RING  Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Murrays Sports
    1/4" Bow Shackle Ronstan PN RF635
    1/4" BOW SHACKLE
    Ronstan
    Rope Lock (Nylon) Murrays Part# 001-0120 Easy-to-adjust black rope lock commonly used for trapeze height adjustment. Standard rope stop on Hobie®, Nacra and Prindle. Double-up back-to-back for extra strength. Hobie part number 61530000 for this rope lock. Works on 3/16 to 1/4" line
    ROPE LOCK
    Murrays Sports
    Ronstan Stainless Thimble for 5mm (3/16") Wire Ronstan thimble is used on shrouds. Constructed of grade 316 stainless steel. Weight: .2 oz.
    RONSTAN STAINLESS THIMBLE FOR 5MM (3/16")
    Ronstan
    CLEVIS PIN 3/16 X 7/8
    Misc
    Wind Vane Replacement Tips and Washers  Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly! 
    WIND VANE REPLACEMENT TIPS & WASHERS
    Murrays Sports
    ROPE END STOP
    Misc
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    CLEVIS PIN 1/4 X 5/8
    Misc
    CLEVIS PIN 1/4 x 3/8
    Misc
    Out of Stock
    3/16 - 1/4" Split Ring Murrays Part# 22-9492 Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler Medium Split ring Dimensions: 5/8″ Diameter Material: 316 Stainless steel. This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
    SPLIT RING 3/16-1/4"
    Misc