Hobie Miracle 20 Mast Parts

Hobie Miracle 20 Mast Parts

59 products
    59 products
    Out of Stock
    H-20 MAST ASSEMBLY
    Hobie
    Out of Stock
    H20 Comtip Murrays Part# 50-40401210 Hobie® factory replacement Hobie 20 CompTip. A CompTip is the upper section of Hobie mast built in or after 1968. Fiberglass and non-conductive, it is designed to prevent electrocution by contact with a high power line.
    H-20 COMPTIP
    Hobie
    Out of Stock
    H17/20/Tiger Mast Base Murrays Part# 50-50416011 Hobie® factory replacement black mast base for Hobie® 17, 20 or Tiger. Use two 6-6 rivets (#19-5032) for installation.
    H-17/20/TIGER MAST BASE
    Hobie
    DOWNHAUL KIT: CASCADE 8:1 H-20 UPGRADE
    Murrays Sports
    Out of Stock
    H14/18/18SX/20/Wave Comp-tip Luff Track 87" Murrays Part# 50-38584001 Hobie factory replacement 87" luff track for Hobie Cats except Hobie 16 and Getaway.  Older H18 comp tips were one long piece of plastic, newer boats have two sections. This plastic piece, and shorter aluminum piece. If you are replacing an older one piece luff track, you will also need to purchase the aluminum top section as well.
    H-14/18/18SX/20/WAVE COMP-TIP LUFF TRACK
    Hobie
    H20 Diamond Wire Double without Turnbuckle Murrays Part# 002-0795-20 Diamond wire double (includes both sides) for Hobie® 20 is constructed to factory specifications. Without turnbuckle. Compare to Hobie Cat® Part# 41750001
    H-20 DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE
    Murrays Sports
    Out of Stock
    H-17/20 POSITIVE MAST ROTATION
    Murrays Sports
    Out of Stock
    H18/20 Updated Luff Track 12.5" Murrays Part# 50-50404101 Hobie® factory aluminum luff track update is 12-1/2" long The Hobie 20 need the extra strength to prevent the sail from pulling out of the luff track. The Hobie 18 uses this as an extension to the wave luff track, the extra strength is great but was not stock on the boat.
    H-18/20 UPDATED LUFF TRACK 12.5"
    Hobie
    Out of Stock
    H17 Updated Luff Track 14.8 Murrays Part# 50-50404111 Factory luff track update for Hobie® 17 measures 14.8" long.
    H-17 UPDATED LUFF TRACK
    Hobie
    Out of Stock
    H20/21/ Super Cruiser Shroud Tang Murrays Part# 50-30690001
    H-20/21/SC SHROUD TANG
    Hobie
    H18/20 Comptip Mast Head Murrays Part# 50-60602041 Hobie 18/20 Comp Tip Mast Head factory replacement mast head for Hobie® 18 or 20 with Comp Tip.
    H-18/20 COMPTIP MAST HEAD
    Hobie
    Out of Stock
    H20 Spreader Arm Murrays Part# 50-41420001 Hobie® factory spreader arm for Hobie 20.
    H-20 SPREADER ARM
    Hobie
    Out of Stock
    H20 Spreader Brace Murrays Part#  50-41430001 Hobie factory replacement spreader brace for Hobie 20.
    H-20 SPREADER BRACE
    Hobie
    Out of Stock
    HALYARD CLEAT (10 PACK)
    Hobie
    Out of Stock
    Compression Plate Assembly Kit H18 Murrays Part# 50-60680001 Hobie® factory mast compression plate assembly kit for Hobie 18 and 18SX
    H-18 COMPRESSION PLATE ASSEMBLY KIT
    Hobie
    Out of Stock
    Hobie Halyard Twist Shackle Murrays Part# 50-60670000 Classic 3/16 inch stainless steel twist shackle from Hobie Cat. Hobie Part# 60670000
    HOBIE HALYARD TWIST SHACKLE
    Hobie
    Hobie Aussie Halyard Ring Murrays Part# 007-3064 If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Murrays Aussie Ring (#01-4216). Hobie® Part# 3064
    HOBIE AUSSIE HALYARD RING
    Hobie
    Mast Rotation Control Arm Murrays Part# 25-3040 Stainless mast rotation control arm is strong and smooth! Arm #25-3040 with 1/4″ hole is for all Hobies except for the Hobie® 17, Prindles and Nacras; Arm #25-3041 with 5/16″ hole is for Nacras, Prindles and the Hobie® 17. H17 uses #19-2235 bolt Hobie Part# 61210001
    MAST ROTATION CONTROL ARM
    Murrays Sports
    Harken Sail Chafe Protector Murrays Part# 28-0285 Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18
    HARKEN SAIL CHAFE PROTECTOR (2)
    Harken
    Main Halyard Ring (Murrays) Murrays Part# 001-4216 If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Hobie Aussie Ring (#07-3064). This item replaces discontinued Part
    MAIN HALYARD RING (MURRAYS)
    Murrays Sports
    H18/20 Gooseneck Yoke Murrays Part# 50-60710000 Hobie® factory replacement gooseneck yoke for Hobie 18 and 20. Hobie Part# 60710000
    H-18/20 GOOSENECK YOKE
    Hobie
    Hobie Halyard Ring with Loop Murrays Part# 50-61290021 Stainless steel halyward ring with loop, used on many Hobie Cat sailboats. Recommended for use with Hobie's twisted halyard shackle Hobie Part# 61290021
    HOBIE HALYARD RING WITH LOOP
    Hobie
    H18 Halyard Lock (Comptip) Murrays Part# 50-61610101 Halyard hook for Hobie 18 comptip mast assembly. Hobie Part# 61610101
    H-18 HALYARD HOOK (COMPTIP)
    Hobie
    Harken 8mm Bow Shackle Murrays Part# 28-2117 The Harken 8mm Bow Shackle is a forged stainless steel shackle that is polished to a high luster and stamped with the screw pin diameter. Bow shackles are best for multidirectional loads. Their large interior opening allows plenty of articulation especially when attached to a round bail.
    HARKEN 8MM BOW SHACKLE
    Harken
    SUPER GOOSE H-17/18/20/21 This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing. The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model. Hobie part number 1510
    H-17/18/20/21 SUPER GOOSE
    Tren-Tec
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Out of Stock
    H20 Spreader Tip Murrays Part# 50-41410001 Hobie® factory replacement spreader tip for Hobie® 20. Hobie Part# 41410001
    H-20 SPREADER TIP
    Hobie
    Hobie Sail Feeder Kit Murrays Part# 50-80100501 Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie®'s Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    Hobie Sail Feeder Kit Murrays Part# 50-80100501 Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie's Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    HOBIE SAIL FEEDER KIT
    Hobie
    Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole Murrays Part# 21-0636 The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081. Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
    Ronstan bow shackle measurements
    RONSTAN 5/16" BOW SHACKLE
    Ronstan
    Hobie Gooseneck Hinge Vertex Murrays Part# 50-50772031 Hobie® factory replacement gooseneck vertex for all Hobie® Cats. Hobie Part# 50772031
    HOBIE GOOSENECK HINGE VERTEX
    Hobie
    Out of Stock
    H20 Jib Halyard Swivel Toggle Murrays Part# 50-41880001 Hobie® factory replacement jib halyard toggle for Hobie® 20 Miracle.
    H-20 JIB HALYARD SWIVEL TOGGLE
    Hobie
    Harken 22mm Block Murrays Part# 28-0224 This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    Harken 29mm Bullet Sheave Murrays Part# 28-0160 Harken's downhaul/halyard sheave makes raising the sail and/or adjusting the downhaul with Harken ball bearing sheaves much easier. This is a direct replacement for the sheaves that came with early Hobie 17s.
    HARKEN 29MM BULLET SHEAVE
    Harken
    Out of Stock
    H-20 SPREADER SLIDE
    Hobie
    DIAMOND WIRE ROLLER
    Misc
    Quick Release Detent Pin 1/4 X 3" Murrays Part# 18-4D300 Economical quick release pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measurements are 1/4" diameter x 3" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: - Use as mast step pin on Hobie® 21 and Prindle 16/18/18-2/19 cats. Compare to Hobie part # 8020501
    Quick Release Detent Pin 1/4 X 3" Murrays Part# 18-4D300 Economical quick release pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measurements are 1/4" diameter x 3" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: - Use as mast step pin on Hobie® 21 and Prindle 16/18/18-2/19 cats. Compare to Hobie part # 8020501
    QUICK RELEASE DETENT PIN 1/4 X 3"
    Misc
    Out of Stock
    H20 3/16 Jib Swivel Pin Murrays Part# 50-41890001 Hobie® factory replacement pin swivel for Hobie® 20 jib.
    H-20 3/16" JIB SWIVEL PIN
    Hobie
    H17 Mast Base Washer Murrays Part# 50-52411001 Replacement washer for Hobie 17 mast base assembly. Hobie Part# 52411001
    H-17 MAST BASE WASHER
    Hobie
    H18 Mast Head/Base Sheave Murrays Part# 50-60620000 Factory replacement sheave for Hobie 18 mast head/base and outhaul assembly. Specs: 1" Diameter x 3/8" wide and 1/4" hole. Also used as traveler control line turning sheave on 2005 and newer Hobie 16 sailboats. Applications: Hobie 18 - Mast head halyard sheave ; mast base halyard sheave ; outhaul car sheaves. Hobie 16 - Jib Traveler line sheave. (in the H16 Race Corner Castings) use 50-8011251 Rivet
    H-18 MAST HEAD/BASE SHEAVE
    Hobie
    Out of Stock
    HOBIE 20 DOWNHAUL SHEAVE - 40700541 Hobie factory replacement downhaul sheave for Hobie® 20 mast. UV-stabilized.   SPECS: 1/2" wide by 1 5/32" diameter, 1/4' hole.
    H-20 DOWNHAUL SHEAVE
    Hobie
    Recently viewed