Hobie Miracle 20 Mast Parts

Hobie Miracle 20 Mast Parts

56 products
    56 products
    Out of Stock
    MAST ASSY H20
    Hobie
    $2,950.00
    Out of Stock
    COMPTIP H20 OS
    Hobie
    $1,109.00
    Out of Stock
    MAST BASE H17/20/TIGER BLACK
    Hobie
    $240.99
    COMP-TIP LUFF TRACK (NO Hobie 16)87"
    Hobie
    $159.99
    H20 Diamond Wire Double without Turnbuckle

Murrays Part# 002-0795-20

Diamond wire double (includes both sides) for Hobie® 20 is constructed to factory specifications. Without turnbuckle.



Compare to Hobie Cat® Part# 41750001
    H-20 DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE
    Murrays Sports
    $145.00
    Out of Stock
    LUFF TRACK UPDATE 12.5"
    Hobie
    $84.99
    Out of Stock
    LUFF TRACK UPDATE H17 14.8"
    Hobie
    $84.99
    Out of Stock
    TANG SHROUD H21/SC/20
    Hobie
    $81.99
    Out of Stock
    MAST HEAD H18/20 COMPTIP
    Hobie
    $71.99
    Out of Stock
    SPREADER ARM H20 SO
    Murrays Sports
    $55.99
    Out of Stock
    SPREADER BRACE H20 SO
    Hobie
    $52.99
    Out of Stock
    Compression Plate Assembly Kit H18
Murrays Part# 50-60680001
Hobie® factory mast compression plate assembly kit for Hobie 18 and 18SX
    COMPRESSION PLATE ASSY KIT H-18
    Hobie
    $49.99
    Harken Sail Chafe Protector

Murrays Part# 28-0285



Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18
    HARKEN SAIL CHAFE PROTECTOR (2)
    Harken
    $49.00
    Out of Stock
    Twist Shackle For Hobie Halyard
    Hobie
    $45.99
    POSITIVE MAST ROTATION: H-17/20
    Murrays Sports
    $45.00
    Hobie Aussie Halyard Ring

Murrays Part# 007-3064

If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Murrays Aussie Ring (#01-4216).

Hobie® Part# 3064
    HOBIE AUSSIE HALYARD RING
    Hobie
    $44.99
    Mast Rotation Control Arm

Murrays Part# 25-3040

Stainless mast rotation control arm is strong and smooth! Arm #25-3040 with 1/4″ hole is for all Hobies except for the Hobie® 17, Prindles and Nacras; Arm #25-3041 with 5/16″ hole is for Nacras, Prindles and the Hobie® 17. H17 uses #19-2235 bolt

Hobie Part# 61210001
    MAST ROTATION CONTROL ARM
    Murrays Sports
    from $44.95
    Main Halyard Ring (Murrays)

Murrays Part# 001-4216

If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Hobie Aussie Ring (#07-3064).

This item replaces discontinued Part
    MAIN HALYARD RING (MURRAYS)
    Murrays Sports
    $40.00
    H18/20 Gooseneck Yoke

Murrays Part# 50-60710000

Hobie® factory replacement gooseneck yoke for Hobie 18 and 20.

Hobie Part# 60710000
    H-18/20 GOOSENECK YOKE
    Hobie
    $34.99
    Hobie Halyard Ring with Loop

Murrays Part# 50-61290021

Stainless steel halyward ring with loop, used on many Hobie Cat sailboats. Recommended for use with Hobie's twisted halyard shackle

Hobie Part# 61290021
    HOBIE HALYARD RING WITH LOOP
    Hobie
    $29.99
    H18 Halyard Lock (Comptip)

Murrays Part# 50-61610101

Halyard hook for Hobie 18 comptip mast assembly.

Hobie Part# 61610101
    H-18 HALYARD HOOK (COMPTIP)
    Hobie
    $29.99
    SUPER GOOSE H-17/18/20/21
This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing.

The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model.

Hobie part number 1510
    H-17/18/20/21 SUPER GOOSE
    Tren-Tec
    $23.10
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16 BOWSHACKLE WITH HOLE
    Ronstan
    $19.99
    Out of Stock
    SPREADER TIP H20 SO
    Hobie
    $19.99
    Hobie Sail Feeder Kit

Murrays Part# 50-80100501

Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie®'s Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    HOBIE SAIL FEEDER KIT
    Hobie
    $19.99
    Hobie Gooseneck Hinge Vertex

Murrays Part# 50-50772031
Hobie® factory replacement gooseneck vertex for all Hobie® Cats.


Hobie Part# 50772031
    HOBIE GOOSENECK HINGE VERTEX
    Hobie
    $17.99
    Harken 22mm Block

Murrays Part# 28-0224

This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    $16.10
    Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole

Murrays Part# 21-0636



The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081.

Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
    5/16 Bow Shackle
    Ronstan
    $16.00
    Out of Stock
    Harken 29mm Bullet Sheave

Murrays Part# 28-0160



Harken's downhaul/halyard sheave makes raising the sail and/or adjusting the downhaul with Harken ball bearing sheaves much easier. This is a direct replacement for the sheaves that came with early Hobie 17s.
    HARKEN 29MM BULLET SHEAVE
    Harken
    $15.85
    Out of Stock
    TOGGLE H20 JIB HALYRD SWVL
    Murrays Sports
    $14.99
    Out of Stock
    SPREADER SLIDE H20 SO
    Hobie
    $12.99
    DIAMOND WIRE ROLLER
    Misc
    $12.00
    Quick Release Detent Pin 1/4 X 3"
Murrays Part# 18-4D300
Economical quick release pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release.

Measurements are 1/4" diameter x 3" maximum grip length (distance from the shoulder to the locking ball bearings).

Uses:

- Use as mast step pin on Hobie® 21 and Prindle 16/18/18-2/19 cats.

Compare to Hobie part # 8020501
    Quick Release Detent Pin 1/4 X 3"
Murrays Part# 18-4D300
Economical quick release pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release.

Measurements are 1/4" diameter x 3" maximum grip length (distance from the shoulder to the locking ball bearings).

Uses:

- Use as mast step pin on Hobie® 21 and Prindle 16/18/18-2/19 cats.

Compare to Hobie part # 8020501
    QUICK RELEASE DETENT PIN 1/4 X 3"
    Misc
    $12.00
    Out of Stock
    PIN SWIVEL 3/16 H20 JIB
    Hobie
    $11.99
    H17 Mast Base Washer

Murrays Part# 50-52411001

Replacement washer for Hobie 17 mast base assembly.

Hobie Part# 52411001
    H-17 MAST BASE WASHER
    Hobie
    $10.99
    H18 Mast Head/Base Sheave

Murrays Part# 50-60620000

Factory replacement sheave for Hobie 18 mast head/base and outhaul assembly.

Specs: 1" Diameter x 3/8" wide and 1/4" hole.

Also used as traveler control line turning sheave on 2005 and newer Hobie 16 sailboats.

Applications:

Hobie 18 - Mast head halyard sheave ; mast base halyard sheave ; outhaul car sheaves.
Hobie 16 - Jib Traveler line sheave. (in the H16 Race Corner Castings) use 50-8011251 Rivet
    H-18 MAST HEAD/BASE SHEAVE
    Hobie
    $9.99
    HOBIE 20 DOWNHAUL SHEAVE - 40700541

Hobie factory replacement downhaul sheave for Hobie® 20 mast. UV-stabilized.  

SPECS: 1/2" wide by 1 5/32" diameter, 1/4' hole.
    H-20 DOWNHAUL SHEAVE
    Hobie
    $9.99
    MAST HINGE PIN NACRA/H17/20
Murrays Part# 56-F158
The mast base engages the mast ball and is secured by this headless clevis pin to allow the mast to be safely raised or lowered.
Specs: 1/4" diameter x 2-3/8" overall length with a grip length of 1-15/16"
Compatibility: Nacra Inter, F18, N15, F17, 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ, as well as Hobie 17, Tiger and 20. Split rings are sold separately.
Compare to Hobie Cat part number 50406301.
    MAST HINGE PIN
    NACRA
    $8.00
    CLEVIS PIN 3/16 X 7/8
    Misc
    $3.50
    CLEVIS PIN 3/16 X 1/2
    Misc
    $2.50