Hobie 16 EPO rudder blades with castings and tiller arms

Hobie 16 Rudder Parts

82 products

    Parts for your Hobie 16 Rudder. From the tiller extension to the rudder blades and all the rudder cams, cam pins, rudder pins, castings, gudgeons and bushings in between.  Hobie OEM factory parts as well as Murrays upgrades for the Hobie 16 catamaran.

    82 products
    Murrays Part# 50-10432000 Hobie® factory 2½" spring for Hobie® 16 lower rudder casting. This spring is longer and stiffer than original equipment (#50-10430000), providing additional tension if you are having trouble with rudder kick up. Used on Hobie 18 Rudder Systems from late 80s through now. Used on Hobie 16 Rudder Systems after 1983 Used on Hobie Getaway Rudder Systems pre- EZ Loc Hobie part number 10432000
    HOBIE RUDDER SPRING-LONG
    Hobie
    Kisme Kleet (4) Murrays Part# 005-1010
    KISME KLEET (4)
    Misc
    Hobie 20-style factory tiller connector post. Part of the Hobie 1953 tiller connection system. Hobie part number 40530000 and 40530001
    H-20 TILLER CONNECTOR POST
    Hobie
    Rudder Casting Lock Spring Murray Part# 50-10430000 Hobie factory replacement 2-1/8" lock spring for rudder casting. Replace rudder springs with this original spring supplied on Hobie® 14, 16, (pre 1983) 17 and 18. Compare to HC part number 10430000 H14, H16, H17, H18, H20
    HOBIE RUDDER SPRING
    Hobie
    RUDDER CASTING DELRIN SCREW - rudder locking adjustment screw - 60450000
    HOBIE DELRIN RUDDER SCREW
    Hobie
    Out of Stock
    H16 Rudder Casting Cam Pin 1/4" Murrays Part# 50-10470000 Hobie® factory replacement flare cam pin for Hobie® 16 rudder casting is 1/4" diameter. Flaring this pin can be difficult, so Murrays recommends using #01-2051 sister screws in place of this stock pin.
    H-16 RUDDER CAST CAM PIN 1/4"
    Hobie
    H14/16 Rudder Return Hand Shock Cord Murrays Part# 001-2240 Two 32" shock cords with balls keep your Hobie® 14 or 16 rudders down when the cams don't! Order Kisme Kleets #05-1010 separately, if needed.
    H-14/16 RUDDER RETURN HAND SHOCK CORD
    Murrays Sports
    Rudder Stiffening Kit Murrays Part# 001-2053 The Rudder Stiffening Kit for all Hobies eliminates excessive clearances between rudders and castings which cause wobble and thwart rudder alignment. Kit has 4 stainless nylock nuts and 8 spacers. Compare to Hobie Cat® item #136.
    RUDDER STIFFENING KIT
    Murrays Sports
    Rudder Casting Plunger H14/16 Murrays Part# 50-10440000 Hobie® factory replacement rudder casting plunger for Hobie® 14 or 16.
    H-14/16 RUDDER CASTING PLUNGER
    Hobie
    Hobie factory replacement retainer clip for Hobie 20-style tiller connector and adjuster kit (#07-1953). TILLER CONNECTION RETAINER CLIP - HOBIE 20. 40590000 MURRAYS.COM - IN STOCK
    H-20 TILLER CONNECTOR RETAINER CLIP
    Hobie
    Screw Delrin 3/8-16 X .75" Murrays Part# 50-8032001 Hobie® factory replacement 3/8-16 x 3/4" Delrin screw is used as rudder rake adjustment screw on Pre-EZ Lock Rudder System. Hobie Part# 8032001
    SCREW DELRIN 3/8-16 X .75"
    Hobie
    Hobie rudder bushing. Hobie part number 8062001
    RUDDER TITE BUSHING EACH
    Murrays Sports
    Hobie factory tiller connector insert bearing for Hobie 20 Miracle. Hobie part number 40680001. Murrays.com - in stock
    HOBIE TILLER CONNECTOR INSERT BEARING
    Hobie
    Out of Stock
    BOLT 3/8-16x4" HX HD MST HV
    Misc
    Yoke Stamping Only Stainless Steel Murrays Part# 001-0063 Replacement yoke stamping for #01-0062 hiking stick yoke assembly. Compare to Hobie Cat® #3205.
    YOKE STAMPING ONLY (SS)
    Murrays Sports
    Hobie 16 One Piece Gudgeon Upper and Lower Bushing Insert - 50102010
    H-16 ONE PIECE GUDGEON UPPER AND LOWER BUSHING INSERT
    Hobie
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    PLASTIC CONTOURED SPACER
    Murrays Sports
    Hobie Tiller End Cap Murrays Part# 50-10560000 Replacement end cap for Hobie tillers.
    HOBIE TILLER END CAP
    Hobie
    Bolt Hex Head 5/16-18 X 2.50" Stainless Steel Murrays Part# 19-2231 Stainless steel rudder bolt for all Hobie® Cats measures 5/16-18 x 2.50".  Used on Hobie Getaway Bow Spreader - Bow Tang Bolt. Rudder bolt for both the upper and lower rudder casting. Compare to Hobie Cat® Part# 8040341
    BOLT HEX HEAD 5/16-18 X 2.50" SS
    Misc
    Spring 1/4" Stainless Steel  Murrays Part# 001-0060 1/4" stainless steel spring as used in the Murrays Tiller Connection Kit (#01-2061)
    SPRING 1/4" (SS)
    Murrays Sports
    Bolt Allen Head 5/16 18 X 1.5" (Stainless Steel) Murrays Part# 19-2229S Bolt Allen Head 5/16 - 18 X 1.5 (Stainless Steel) - replace hex head bolts used on Hobie 16, 17, 18, 20 Upper adjustable rudder castings. Limited space for Hex head requires thin walled 1/2" socket with 1/6" drive. Socket head bolt uses Allen head tool which is cheap, strong, and compact for on board storage and convenient adjustment.
    BOLT 5/16-18 X 1.5" (SS)
    Misc
    Bolt Hex Head 5/16-18 X 1.5" Murrays Part# 19-2229 Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting. Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164
    BOLT HEX HEAD 5/16-18 X 1.5"
    Misc
    Sealed Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Sealed Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231 Rivet and Hobie Cat® #8011291 rivet casing.
    RIVET CCP SEALED 6-8 (3/16 X 1/2)
    Misc
    Bolt Hex 5/16-18 X 1" Murrays Part# 50-8040171 Hobie® factory hex head bolt measures 5/16-18 x 1". Used on #07-1953 Tiller Connector for Hobie® 20. Hobie Part# 8040171
    BOLT HEX 5/16-18 X 1"
    Hobie
    Bolt Hex Head 1/4-20 X 2.25 Stainless Steel Murrays Part# 19-2221 Prindle 16/18 and Hobie® rudder bolt. Stainless steel 1/4-20 x 2-1/4" hex head bolt.
    BOLT HEX HEAD 1/4-20 X 2.25" (SS)
    Misc
    Screw RHMS #12-24 X 1.25 Stainless Steel Murrays Part# 19-3520 Stainless steel, round head #12-24 x 1.25" machine screw is a replacement screw for Hobie® rudder gudgeon.
    SCREW RHMS #12-24 X 1.25 (SS)
    Misc
    Screw 1/4-20 x 1" THMS-P SS Murrays Part# 50-8030701 Hobie® factory replacement 1/4-20 x 1" stainless steel screw. Used on Hobie® pre-EZ-Loc rudder system, tendon tiller connector, rudder adjuster, Hobie 20 shroud anchor plate. Applications: H18/ Hobie 18 SX Rudder Adjuster Screw: 1 Compare to Hobie Part# 8030701
    SCREW STAINLESS STEEL 1/4-20x1"
    Hobie
    Nut Nylock 5/16-18 Low Profile Murrays Part# 50-8050331 Hobie® factory replacement low-profile 5/16-18 nylock nut.  Fits EZ Loc Upper and Lower Rudder Housing Hobie Bravo, Getaway and Wave. Hobie Part# 8050331
    NUT NYLOCK 5/16"-18 LOW PRO
    Hobie
    Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033 Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231.
    RIVET CCP 6-8 (3/16 X 1/2)
    Misc
    Murrays PN 001-0053 The Murrays Rudder Stiffening Spacer is a 2" diameter spacer for use on Hobie, Nacra and Prindle catamarans to eliminate excessive clearances between rudders and castings which cause rudder slop, side to side wobble, and thwart rudder alignment. A kit with spacers and nuts is also available (#01-2053).  The Murrays Rudder Stiffening Spacer are quite thin so that you can achieve a perfect fit. Standard kits come with 8 spacers.
    RUDDER STIFFENING SPACER
    Murrays Sports
    3/16 - 1/4" Split Ring Murrays Part# 22-9492 Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler Medium Split ring Dimensions: 5/8″ Diameter Material: 316 Stainless steel. This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
    3/16-1/4" SPLIT RING
    Misc
    Nut Nylock 5/16-18 Stainless Steel Murrays Part# 19-2520 5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut Used with Hobie Getaway Bow Tang Bolt
    NUT NYLOCK 5/16-18 (SS)
    Misc
    1/2 BALL (NYLON) - Hobie half round washer spacer tiller connector - Hobie part number 11510000 HOBIE HALF SPHERE TILLER CONNECTOR
    NYLON 1/2" BALL
    Murrays Sports
    Screw H20 Connector 10-24 X .25" Murrays Part# 50-8032401 Hobie® factory replacement screw for Hobie 20 tiller connector. Stainless steel 10-24 x 1/4" pan-head machine screw with Phillips head. Hobie Part# 8032401
    H-20 CONNECTOR SCREW 10X24X.25"
    Hobie
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20 SS
    Misc
    Nut Nylock #10-32 Stainless Steel Thick Murrays Part# 19-2515 Mainsheet block replacement nut. The stainless hex nut with nylock insert will not rust or work loose if properly installed. Fits Hobie Main Traveler Car. Fits Hobie Tiller Hinge Screw. Fits Hobie Masthead Sheave Screw H16 Hobie Getaway Compare to Hobie Part Number 8050201
    NUT NYLOCK #10-32 (SS) THICK
    Misc
    Washer 3/8 X 3/4 Nylon for 07-1953 Murrays Part# 50-8080691 Washer for tiller arm bolt #50-8040171. Hobie® factory item
    WASHER NYLON 3/8 X 3/4"
    Hobie
    Screw PHMS #10-32 X 1 Stainless Steel Slot Head Murrays Part# 19-2915 Stainless steel, pan head #10-32 x 1" machine screw with slot is used as dolphin striker screw on all Prindles. Replaces Murrays item #56-F112. Also used in some Hobie Applications, compare to 8030111 Hobie Part. Applications: H18/18 SX/16 and Getaway Tiller Hinge Screw: 2
    SCREW PHMS #10-32 X 1" (SS)
    Misc
    WASHER STAINLESS STEEL 1/4 x 1/2 x .032"
    Hobie
    Washer 5/16 X 9/16 Flat Murrays Part# 50-8080181 Hobie Part# 8080181
    WASHER FLAT 5/16 X 9/16"
    Hobie
    Recently viewed