Hobie 16 Rear Crossbar Parts

Hobie 16 Rear Crossbar Parts

40 products

    Parts for your Hobie 16 Rear Crossbar

    40 products
    Out of Stock
    Tracker Traveler Kit
Murrays Part# 007-1040
Traveler car assembly for Hobie® 14 or 16 includes #07-1050 tracker car, swivel cam, mounting plate, line and fasteners. Standard on Hobie 14/16/17's made prior to 1994 but after the early 70s. This kit includes all the parts to rebuild your rear traveler system on an old worn out boat, or update some of the REALLY old traveler car systems on the early H14 or H16 boats.
    TRACKER TRAVELER KIT
    Murrays Sports
    $465.00
    Out of Stock
    Hobie 16 Rear Crossbar w/integrated track
    Hobie
    $412.99
    HARKEN 57MM TRIPLE RATCHET BLOCK-SWIVEL, CAM CLEAT
    Harken
    $300.15
    Out of Stock
    Corner Casting Race Rear Right H14/16
Murrays Part# 50-10202011
Hobie® factory replacement left rear corner casting (#3) for Hobie® 14 or 16. This part replaces Hobie Cat's discontinued item #10200011. Use six 6-8 rivets (#19-5033) for installation.
Rear Crossbar casting for Hobie 16.
    CORNER CASTING R/R H14/16
    Hobie
    $266.99
    H14/16 Corner Casting Race Rear Left Black

Murrays Part# 50-10212011

Hobie® factory replacement left rear corner casting (#4) for Hobie® 14 or 16. This part replaces Hobie Cat's discontinued item #10210011. Use six 6-8 rivets (#19-5033) for installation.
    H-14/16 CORNER CASTING RACE REAR LEFT BLACK
    Hobie
    $266.99
    MAIN TRAVELER TRACK BK (DEEP)
    Hobie
    $251.99
    Out of Stock
    Tracker Car Complete (Pre-1994)
Murrays Part# 007-1050
This tracker car is the standard replacement part for all 1993 and earlier Hobie® 14, 16 and 17 main tracker traveler assemblies. Includes 2-3 rivets where required. Hobie Cat® factory item #105.
    TRACKER CAR COMPLETE (PRE'94)
    Hobie
    $159.99
    TRACKER CAR COMPLETE NEW (POST93)
    Hobie
    $159.99
    Out of Stock
    Tracker: Bottom Roller (Pre-1994)
Murrays Part# 007-1060
The standard replacement bottom roller for all 1993 and earlier Hobie® 14 and 16s. Includes two rivets. Hobie Cat® factory item #106.
    TRACKER: BOTTOM ROLLER (PRE 94)
    Hobie
    $125.99
    TRACKER:BOTTOM ROLLER (POST93)
    Hobie
    $125.99
    Out of Stock
    Aluminum Adjustable tiller extension for Hobie, Nacra and Prindle catamarans. Compare to Hobie 20550001 Hobie hot stick
    ALUMINUM TILLER EXTENSION 50"-95"
    Murrays Sports
    $89.00
    Harken Swivel with Carbo Cam Bullseye

Murrays Part# 25-3010

Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads and flat head screws separately to mount to your front crossbar.
    HARKEN SWIVEL W/CARBO CAM & BULLSEYE
    Harken
    $87.99
    TRACKER: HINGE UPRIGHT (EA)so
    Hobie
    $28.99
    Quick Release Pin Deluxe  3/16 X 3/4"

Murrays Part# 18-3M075

This Quick Release Pin features 2 locking balls for a extra secure grip, and a push button deluxe dished head with a hole for lanyard attachment. The Deluxe pin is quick and easy to remove and install, and makes getting on and off the water quicker and easier.
    QUICK RELEASE PIN DELUXE 3/16 X 3/4"
    Misc
    $24.00
    Quick Release Pin Standard
3/16 X 3/4"

Murrays Part# 18-3R075



This quick-release pin has a standard head with a pull ring. Use two for convenient connection of jib sheet blocks on Nacra and Inter cats. Measurements are 3/16" diameter x 3/14" maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE PIN STANDARD 3/16 X 3/4
    Misc
    $20.00
    HOBIE TRACKER: SHEAVE REPLACEMENT KIT
    Hobie
    $19.95
    SWIVEL MOUNT BASE W/FASTENERS
    Hobie
    $17.99
    Harken 29mm Bullet Sheave

Murrays Part# 28-0160



Harken's downhaul/halyard sheave makes raising the sail and/or adjusting the downhaul with Harken ball bearing sheaves much easier. This is a direct replacement for the sheaves that came with early Hobie 17s.
    HARKEN 29MM BULLET SHEAVE
    Harken
    $15.45
    Hobie Main Traveler Track Access Plate Kit

Murrays Part# 50-11810011

This kit has been discontinued by Hobie, but the plates are still available, so Murrays is producing the kits with the Hobie plates.
    HOBIE MAIN TRAVELER TRACK ACCESS PLATE KIT
    Hobie
    $10.99
    Ronstan Bullseye with Ferrule

Murrays Part# 25-0323



Stainless ferrule eliminates with nylon housing, the stainless center coating prevents grooving and wear from uses. Allows for up to 7/16" line capacity.

Mounting: Two screws ordered separately (#10-32x1") part number 19-2915.
    RONSTAN BULLSEYE FAIRLEAD WITH FERRULE
    Ronstan
    $8.20
    Tracker: Sheave

The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's. Hobie® factory item #11880000.

Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave.

Fits Hobie Getaway Main Traveler Car.
    HOBIE TRACKER TRAVELER SHEAVE
    Hobie
    $5.99
    Murrays Part#  007-1051
The standard replacement deck plate for the traveler on all Hobie® 14, 16 and newer 17's. Hobie Cat® factory item #11870000.  Uses a 3/16 x 1/2" clevis pin to attach to the main sheet system.
Also used in Hobie 14 and Hobie 16 upgrade downhaul systems to secure lower block.
Sold individually
    TRACKER: DECK PLATE (EA)
    Hobie
    $5.39
    TRACKER: SHEAVE SPACER (EA)
    Hobie
    $3.99
    TRACKER: HINGE PIN (EA)
    Hobie
    $3.99
    CLEVIS PIN 3/16 X 5/8
    Misc
    $2.99
    CLEVIS PIN 3/16 X 1/2
    Misc
    $2.50
    BOLT 5/16 X 18 X3.5"
    Misc
    $2.39
    Mini Fairlead: 1 X 1/4
Murrays Part# 25-0338
Stainless mini fairlead strap measurements:
A = 1 1/8" between holes center-to-center
B = 3/8" height
C = 3/16" hole diameter
Compare to Hobie Part 11470000
Rear Crossbar Padeye
    RONSTAN MINI FAIRLEAD: 1 X 1/4
    Ronstan
    $2.00
    Rivet CCC 6-6 (3/16 X 3/8) Countersunk
Murrays Part# 19-5024
Countersunk stainless steel 3/16" x 3/8" rivet for traveler tracks, etc.
Compare to Hobie Part # 8010201.
This rivets is what Hobie recommends for both the main traveler tack and the jib traveler track.
We also recommend using an 1/8" stop sleeve, part number 002-1041, as a spacer to help you apply pressure on the rivet inside the track, as the track is too narrow for most rivet guns to get far enough inside to apply pressure to the rivet.
    RIVET CCC 6-6 CSK
    Misc
    $1.99
    Nut 1/4-20 Centerlock SS
    Murrays Sports
    $1.99
    Small Fairlead: 1-1/4 X 1/2
Murrays Part# 23-0921
Stainless steel fairlead measurements:
A = 1-1/4" (31.4mm) between holes center-to-center
B = 1/2" (12.7mm) height
C = 3/16" (5mm) hole diameter
    RONSTAN SMALL FAIRLEAD: 1-1/4 X 1/2
    Ronstan
    $1.90
    Bolt Hex Head 5/16-18 X 1.5"

Murrays Part# 19-2229




Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting.

Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164
    BOLT HEX HEAD 5/16-18 X 1.5"
    Misc
    $1.50
    Sealed Rivet CCP 6-8 (3/16 X 1/2)
Murrays Part# 19-5033S
Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed.
Sealed Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231 Rivet and Hobie Cat® #8011291 rivet casing.
    RIVET CCP SEALED 6-8 (3/16 X 1/2)
    Misc
    $1.40
    Rivet CCP 6-8 (3/16 X 1/2)
Murrays Part# 19-5033
Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231.
    RIVET CCP 6-8 (3/16 X 1/2)
    Misc
    $0.85
    Nut Nylock 3/8-16" Stainless Steel

Murrays Part# 19-2524

Stainless 3/8-16 hex nut with nylock insert will not rust or work loose if properly installed. Used on newer (1994) Hobie 16 pylon bolt.

Hobie Part# 8050521
    NUT NYLOCK 3/8-16" (SS)
    Misc
    $0.80
    Nut Nylock 5/16-18 Stainless Steel
Murrays Part# 19-2520
5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut
Used with Hobie Getaway Bow Tang Bolt
    NUT NYLOCK 5/16-18 (SS)
    Misc
    $0.75
    Out of Stock
    3/16 - 1/4" Split Ring
Murrays Part# 22-9492
Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler
Medium Split ring
Dimensions: 5/8″ Diameter
Material: 316 Stainless steel.
This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
    SPLIT RING 3/16-1/4"
    Misc
    $0.75
    1/2 BALL (NYLON) - Hobie half round washer spacer tiller connector - Hobie part number 11510000 HOBIE HALF SPHERE TILLER CONNECTOR
    1/2 BALL (NYLON)
    Murrays Sports
    $0.50
    Screw PHMS #10-32 X 1 Stainless Steel Slot Head
Murrays Part# 19-2915
Stainless steel, pan head #10-32 x 1" machine screw with slot is used as dolphin striker screw on all Prindles. Replaces Murrays item #56-F112.
Also used in some Hobie Applications, compare to 8030111 Hobie Part.
Applications:
H18/18 SX/16 and Getaway
Tiller Hinge Screw: 2
    SCREW PHMS #10-32 X 1" (SS)
    Misc
    $0.36
    NUT SQUARE 10-32
    Hobie
    $0.29