Hobie 16 Hull Parts

Hobie 16 Hull Parts

33 products

    Parts for your Hobie 16 Hull

    33 products
    Out of Stock
    H-16 RIGHT RACE HULL-WHITE
    Hobie
    Hobie 16 Hull Pads by Forward
    Forward WIP
    The Murrays Hobie 16 one piece rudder gudgeon is not cast but machined and then anodized for superior strength and longevity. Compare to Hobie 50102011
    The Murrays Hobie 16 one piece rudder gudgeon is not cast but machined and then anodized for superior strength and longevity. Compare to Hobie 50102011
    MURRAYS H-16 ONE PIECE RUDDER GUDGEON
    Murrays Sports
    HOBIE 2020 ERA HULL DECAL (RIGHT SIDE)
    Hobie
    Hobie 2020 Era Hull Decal (Left Side) Murrays Part# 50-22330041 Peel and stick on Hull Decal for the Port Hull. Hobie part number 22330041, 22330051
    HOBIE 2020 ERA HULL DECAL (LEFT SIDE)
    Hobie
    The Hobie 16 and 14 Surefoot EVA Deck Grip Kit features 3m peel and stick backing on cut-diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span.  EVA is a lightweight foam doesn’t absorb water the way carpet does, so it dries quickly! Includes​ four 4" x 40" strips - covers both sidebars. Compare to Hobie Cat® Rail Rug #1671BLK.
    The Hobie 16 and 14 Surefoot EVA Deck Grip Kit features 3m peel and stick backing on cut-diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span.  EVA is a lightweight foam doesn’t absorb water the way carpet does, so it dries quickly! Includes​ four 4" x 40" strips - covers both sidebars. Compare to Hobie Cat® Rail Rug #1671BLK.
    H14/16 SUREFOOT EVA KIT
    Murrays Sports
    GUDGEON DIE CAST Hobie 16
    Hobie
    Out of Stock
    SCREWS GUDGEON LONG PKG OF 16
    Hobie
    RUDDER PINS W/BUSHINGS H14/16 Aluminum rudder pins for a Hobie 14 and 16. Includes cotter pins and 4 rudder bushings. Hobie part numbers: 20880001 and 8062001
    H-14/16 RUDDER PINS WITH BUSHINGS
    Murrays Sports
    Hobie Shroud Anchor Pin Hobie 16, 17 and 18. 20100000 20100010
    H-16/17/18 SHROUD ANCHOR PIN UPDATE
    Murrays Sports
    H14/16/17/18 Gudgeon Lower Murrays Part# 25-3352 The latest, strongest rudder gudgeon design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14, 16 and 17, order separate upper and lower gudgeons. For all other Hobie® cats with new-style castings, post 1986, order 4 for a complete set . Replacement for Hobie Part# 50101401
    H14/16/17/18 LOWER GUDGEON
    Murrays Sports
    RUDDER PINS H14/16 Stainless Steel Murrays Part# 001-2269 Weight-saving, hollow stainless rudder pins for Hobie® 14 or Hobie® 16 with stronger .065" wall provide reduced wear and the best long-term fit. Includes one pair of 3/8" x 8" rudder pins with cotter pins. These rudder pins are sold as a pair, whereas Hobie Cat® sells theirs individually as item #20880011. New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and
    H-14/16 RUDDER PINS PR (SS)
    Murrays Sports
    H14/16 Aluminum Rudder Pins Murrays Part# 001-2272 Aluminum rudder pins are standard on Hobie® 14 and 16 and are good for all-around, low maintenance use. Pair of 3/8" x 8" rudder pins with cotter pins. New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be difficult to remove. The stainless pins are a better fit. Sold in pairs
    H-14/16 ALUMINUM RUDDER PINS
    Murrays Sports
    Hobie Shroud Anchor Bar Murrays Part# 50-50101701 This is the bar that the shroud anchor pins screws into to secure the shrouds on. Shroud anchor bar for Hobie Cat masts (replaces the nut used on older models). Use with the anchor pin to secure under the lip of the hull. Stainless steel Length: 3.5 inches Application: Hobie 14/16/17/18 sailboats Compare to Hobie Part# 50101701
    HOBIE SHROUD ANCHOR BAR
    Hobie
    H14/16 Upper Gudgeon Murrays Part# 25-3351 This latest, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14's, 16's and 17, order separate upper and lower gudgeons.  For all other Hobie® cats Part# 25-3352 for both gudgeons. Each This gudgeon is a replacement for item #50101301
    H-14/16 UPPER GUDGEON
    Murrays Sports
    Rudder Pins H14/16 Pair (Nylon) Murrays Part# 001-2271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. Pair of 3/8" x 8" rudder pins with cotter pins for Hobie® 14 or Hobie® 16. Each pair is equivalent to two Hobie Cat® item #10881000 Sold in pairs
    H-14/16 NYLON RUDDER PINS PR
    Murrays Sports
    H14/16 Bow Tang Murrays Part# 50-20120000 Hobie® factory replacement bow tang for Hobie® 14, 16 or Getaway. Use #19-3530 screw and #19-2520 nylock nut on Hobie 16; use #19-3530 screw on Hobie 14. The original Hobie® 14 tang is no longer available. 20120010
    H-14/16 BOW TANG
    Hobie
    Ronstan Plastic Drain Plug with Chrome Brass Housing, 15/16" Hole Murrays Part# 21-0737 This lightweight and inexpensive plug features a molded recess in the base that traps sealant (sold separately) in place, providing a more watertight seal. Nylon plug is UV-stabilized. Retaining legs keep drain plug from falling out of hole when unscrewed. Includes chromed brass housing (body) and gasket.
    RONSTAN PLASTIC DRAIN PLUG WITH CHROME BRASS HOUSING, 15/16" HOLE
    Ronstan
    Ronstan Series 19 C-Track End Cap Murrays Part# 21-0366 These are End Stops for the new C-Track by Ronstan. Similar to the stainless tracks used on H18 and H16 in the past. Track end, plastic Best replacement for End stop for 5/8" jib track as on Hobie® 16 or Hobie® 18. The end stop can be fastened with #19-1620 screw or #19-5021 6-4 countersunk rivet. Compare to Hobie Cat part #20260000.
    RONSTAN JIB TRACK END CAP
    Ronstan
    Drain Plug with Plastic Base Murrays Part# 001-0051 This lightweight and inexpensive drain plug features a molded recess in the molded nylon base that traps sealant (sold separately) in place, providing a more watertight seal. Gasket included.
    DRAIN PLUG WITH PLASTIC BASE
    Sea Dog
    Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000
    Hobie drain plug 10091000 Hobie 18
    DRAIN PLUG WITH GASKET
    Misc
    Screw 12x24x1 Pan Head (Long Lock) Murrays Part# 50-8030402 This screw is used to hold the rudder gudgeons on the back of the boat.  Hobie Part# 8030402
    SCREW 12x24x1 PAN HEAD (LONG LOCK)
    Hobie
    Out of Stock
    Hobie 16 One Piece Gudgeon Upper and Lower Bushing Insert - 50102010
    H-16 ONE PIECE GUDGEON UPPER AND LOWER BUSHING INSERT
    Hobie
    Screw RHMS 5/16-18 X 1.25" Stainless Steel Murrays Part# 19-3530 Stainless steel round head machine screw measures 5/16-18 x 1-1/4". Bow Tang Bolt Equivalent to Hobie Cat® Part# 8030301
    SCREW RHMS 5/16-18 X 1.25 (SS)
    Misc
    Screw RHMS #12-24 X 1.25 Stainless Steel Murrays Part# 19-3520 Stainless steel, round head #12-24 x 1.25" machine screw is a replacement screw for Hobie® rudder gudgeon.
    SCREW RHMS #12-24 X 1.25 (SS)
    Misc
    Spring Clip: 1/4-5/16 Murrays Part# 25-2204 Use this stainless spring clip for quick rudder pin removal or on 1/4" to 5/16" pins. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie 14, 16, 17, 18, 20, Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape.
    SPRING CLIP: 1/4 - 5/16"
    Ronstan
    Rivet CCP 6-10 (3/16 X 5/8) Murrays Part# 19-5034 Stainless steel 3/16" x 5/8" rounded pan head rivet. Compare to Hobie Cat® #8010121. Halyard mast cleat rivet
    RIVET CCP 6-10 (3/16 X 5/8)
    Misc
    Nut Nylock 5/16-18 Stainless Steel Murrays Part# 19-2520 5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut Used with Hobie Getaway Bow Tang Bolt
    NUT NYLOCK 5/16-18 (SS)
    Misc
    Hobie Drain Plug Screw Murrays Part# 50-8031731 This screw is used to hold the rudder housing in the back of many of the Hobie Beach cats. H14, H16, H17, H18 Hobie Part# 8031731
    HOBIE DRAIN PLUG SCREW
    Hobie
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20 SS
    Misc
    FHSMS #8 X 1 Stainless Steel Murrays Part# 19-1620 Flat head, self-tapping, stainless steel #8 x 1" sheet metal screw. This screw is commonly used to hold the track endcaps on pre 1997 H16 Jib Traveler Tracks and all H18 Jib Traveler Tracks. Can screw into aluminum or fiberglass.
    SCREW FHSMS #8 X 1" (SS)
    Misc
    Screw FHSMS #8 X 3/4 Stainless Steel Murrays Part# 19-1621 Flat head, self tapping, stainless steel sheet metal screw #8 x 3/4" Compare to Hobie Part 8031501 Used to mount swivel jam cleat and Jib Car Stop
    SCREW FHSMS #8 X 3/4" (SS)
    Misc
    Cotter Pin 3/32 X 3/4 Murrays Part# 19-1015 Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111. Stainless steel cotter pin measures 3/32" x 3/4".
    COTTER PIN 3/32 X 3/4" SS
    Misc