Hobie 16 Front Crossbar Parts

Hobie 16 Front Crossbar Parts

66 products

    Parts for your Hobie 16 Front Crossbar.

    66 products
    Ronstan Series 19 C-Track End Cap Murrays Part# 21-0366 These are End Stops for the new C-Track by Ronstan. Similar to the stainless tracks used on H18 and H16 in the past. Track end, plastic Best replacement for End stop for 5/8" jib track as on Hobie® 16 or Hobie® 18. The end stop can be fastened with #19-1620 screw or #19-5021 6-4 countersunk rivet. Compare to Hobie Cat part #20260000.
    RONSTAN JIB TRACK END CAP
    Ronstan
    H18 Mast Head/Base Sheave Murrays Part# 50-60620000 Factory replacement sheave for Hobie 18 mast head/base and outhaul assembly. Specs: 1" Diameter x 3/8" wide and 1/4" hole. Also used as traveler control line turning sheave on 2005 and newer Hobie 16 sailboats. Applications: Hobie 18 - Mast head halyard sheave ; mast base halyard sheave ; outhaul car sheaves. Hobie 16 - Jib Traveler line sheave. (in the H16 Race Corner Castings) use 50-8011251 Rivet
    H-18 MAST HEAD/BASE SHEAVE
    Hobie
    3-Hole Adapter Pad Murrays Part# 001-0109 Our 3-hole adapter pad fits a Hobie® or Prindle elliptical crossbar. Polyurethane bases provide flat mounting surfaces for mast rotation control cleats, barberhauler cleats, or Hobie® 16 jib trim cleats. Use to mount small Ronstan C-Cleat (#21-5000) or Ronstan Small or Large Swivel 360 Cleats (#21-0067 or #21-0058). Each base can be port or starboard, depending on how cleats are installed.
    3-HOLE ADAPTER PAD
    Murrays Sports
    KISME "IT" TRAVELER-EACH
    Misc
    Out of Stock
    Jib Car Stop (Integrated Track) Murrays Part# 50-25231051 Hobie® factory replacement jib car stop for Hobie 16's with integrated track (1995 and later). Hobie Part# 25231051
    JIB CAR STOP (INTEGRATED TRACK)
    Hobie
    Bolt 5/16 X 18 X3.5" Murrays Part# 50-8040371 Hobie® factory replacement 5/16-18 x 3-7/16" bolt. Pylon bolt for Hobie® 14 and older 16 (1994 and prior; starting in 1995, boats had newer style castings/pylons). Hobie Part# 8040371
    BOLT 5/16 X 18 X3.5"
    Hobie
    Out of Stock
    Nut Nylock 1/2-13" Stainless Steel Thin Murrays Part# 19-2531 Thin stainless steel 1/2-13 hex nut with nylock insert will not rust or work loose if properly installed. Used on 1/2" pylon bolt on most older Hobie 16's (changed to 3/8" in 1994). Equivalent to Hobie #8050631.
    NUT NYLOCK 1/2-13 (SS) THIN
    Misc
    Bolt Hex Head 5/16-18 X 2.50" Stainless Steel Murrays Part# 19-2231 Stainless steel rudder bolt for all Hobie® Cats measures 5/16-18 x 2.50".  Used on Hobie Getaway Bow Spreader - Bow Tang Bolt. Rudder bolt for both the upper and lower rudder casting. Compare to Hobie Cat® Part# 8040341
    BOLT HEX HEAD 5/16-18 X 2.50" SS
    Misc
    Bolt Hex Head 1/4-20 X 3.5" Stainless Steel Murrays Part# 19-2224 Stainless steel hex head bolt measures 1/4-20 x 3-1/2" Pylon Bolt for newer H16 Hobie Part# 8040361
    BOLT 1/4-20 X 3.5" (SS)
    Misc
    Rivet CCC 6-6 (3/16 X 3/8) Countersunk Murrays Part# 19-5024 Countersunk stainless steel 3/16" x 3/8" rivet for traveler tracks, etc. Compare to Hobie Part # 8010201. This rivets is what Hobie recommends for both the main traveler tack and the jib traveler track. We also recommend using an 1/8" stop sleeve, part number 002-1041, as a spacer to help you apply pressure on the rivet inside the track, as the track is too narrow for most rivet guns to get far enough inside to apply pressure to the rivet.
    RIVET CCC 6-6 CSK
    Misc
    Nut Stainless Steel 1/4-20" Centerlock Murrays Part# 50-8050121
    NUT STAINLESS STEEL 1/4-20" CENTERLOCK
    Hobie
    Small Fairlead: 1-1/4 X 1/2 Murrays Part# 23-0921 Stainless steel fairlead measurements: A = 1-1/4" (31.4mm) between holes center-to-center B = 1/2" (12.7mm) height C = 3/16" (5mm) hole diameter
    RONSTAN SMALL FAIRLEAD: 1-1/4 X 1/2
    Ronstan
    Sealed Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Sealed Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231 Rivet and Hobie Cat® #8011291 rivet casing.
    RIVET CCP SEALED 6-8 (3/16 X 1/2)
    Misc
    Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033 Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231.
    RIVET CCP 6-8 (3/16 X 1/2)
    Misc
    Nut Nylock 3/8-16" Stainless Steel Murrays Part# 19-2524 Stainless 3/8-16 hex nut with nylock insert will not rust or work loose if properly installed. Used on newer (1994) Hobie 16 pylon bolt. Hobie Part# 8050521
    NUT NYLOCK 3/8-16" (SS)
    Misc
    Rivet 6-18 Aluminum RIVET POP 3/16 x 1 1/8th inch aluminum rivet to hold the traveler control sheave on a H16 front crossbar from late 90s to current. Hobie Part Number 8011251
    RIVET 6-18 ALUMINUM
    Hobie
    Out of Stock
    Nut Nylock 3/8-24 Murrays Part# 50-8050511 Replacement 3/8-24 nylock nut is used on Hobie® 14, 16 and 18 dolphin striker rods, as well as Hobie® 17 inboard support. Hobie Part# 8050511
    NUT NYLOCK 3/8-24"
    Hobie
    Nut Nylock 5/16-18 Stainless Steel Murrays Part# 19-2520 5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut Used with Hobie Getaway Bow Tang Bolt
    NUT NYLOCK 5/16-18 (SS)
    Misc
    Rivet CCP 6-4 (3/16 X 1/4) Murrays Part# 19-5031 Stainless steel 3/16" x 1/4" rounded pan head rivet. Compare to Hobie Cat® #8010181. This is a common rivet used on many extrusions. Hobie, Nacra, Prindle masts and booms. Pair with a rivet casing to seal the rivet hole when used on masts. All Hobie mast hounds, tangs, heads, and cheek blocks. Used with Hobie Getaway Bow Spreader Plates Used on Hobie Getaway FWD and REAR Crossbar Stop Plates
    RIVET CCP 6-4 (3/16 X 1/4)
    Misc
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20 SS
    Misc
    Screw PHMS #10-32 X 1 Stainless Steel Slot Head Murrays Part# 19-2915 Stainless steel, pan head #10-32 x 1" machine screw with slot is used as dolphin striker screw on all Prindles. Replaces Murrays item #56-F112. Also used in some Hobie Applications, compare to 8030111 Hobie Part. Applications: H18/18 SX/16 and Getaway Tiller Hinge Screw: 2
    SCREW PHMS #10-32 X 1" (SS)
    Misc
    FHSMS #8 X 1 Stainless Steel Murrays Part# 19-1620 Flat head, self-tapping, stainless steel #8 x 1" sheet metal screw. This screw is commonly used to hold the track endcaps on pre 1997 H16 Jib Traveler Tracks and all H18 Jib Traveler Tracks. Can screw into aluminum or fiberglass.
    SCREW FHSMS #8 X 1" (SS)
    Misc
    Screw FHSMS #8 X 3/4 Stainless Steel Murrays Part# 19-1621 Flat head, self tapping, stainless steel sheet metal screw #8 x 3/4" Compare to Hobie Part 8031501 Used to mount swivel jam cleat and Jib Car Stop
    SCREW FHSMS #8 X 3/4" (SS)
    Hobie
    NUT SQUARE 10-32 Murrays Part# 50-8051301 Hobie® factory replacement stainless steel 10-32 square nut can be used when mounting downhaul/halyard cleat on Hobie® 14 or 16. Also can be used for mounting H17 trampoline eye straps. Use 19-2910 screw. Hobie Part# 8051301
    NUT SQUARE 10-32
    Hobie
    FHSMS #6 X 1/2 Stainless Steel Murrays Part# 19-1610 Flat head self-tapping #6 x 1/2" sheet metal screw can be used to attached lance cleats.
    SCREW FHSMS #6 X 1/2" (SS)
    Misc
    Out of Stock
    Jib Traveler Car 2005 and Newer Hobie®'s jib traveler car for the integrated track crossbar on the Hobie® 16 adds bearings to the popular version from the 2004 Worlds. Standard equipment since late 2005, this jib traveler is constructed of Zytel, a very strong, glass-reinforced nylon that resists fatigue and impact failure. Brass traveler bearings give easier movement under load. Includes holes for anchoring traveler and traveler return lines.
    JIB TRAVLER CAR 2005 AND NEWER
    Hobie
    Recently viewed