Hobie 16 Boom Parts

Hobie 16 Boom Parts

26 products

    Parts for your Hobie 16 Boom

    26 products
    Out of Stock
    Boom Assembly H16 Black Murrays Part# 50-20720011 Black boom assembly for Hobie® 16 includes end caps, block hanger, and barrel cleat. Order gooseneck assembly separately. This boom is normally a special order item. Hobie Part# 20720011
    BOOM ASSEMBLY H-16 BLACK
    Hobie
    HOBIE 14/16 GOOSENECK ASSEMBLY Murrays PN 50-10770001 Hobie factory replacement gooseneck assembly for Hobie 14 or 16. Hobie Cat item #10770001.
    GOOSENECK ASSEMBLY H14/16
    Hobie
    BOOM END CAP H14/16 AFT
    Hobie
    GOOSENECK BOOM PIN H14/16
    Hobie
    V JAM CLEAT BOOM (3/16" HOLES)
    Hobie
    GOOSENECK SLIDE H14/16
    Hobie
    SUPER GOOSE H-17/18/20/21 This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing. The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model. Hobie part number 1510
    SUPER GOOSE H-17/18/20/21
    Tren-Tec
    GOOSENECK VERTEX H ALL
    Hobie
    Out of Stock
    Boom End Cap H14/16 Forward Murrays Part# 50-10740011 Hobie® factory replacement end cap for the forward end of Hobie® 14 or 16 boom. Also for Hobie® 21SC. Use three #19-5032 6-6 rivets for installation.
    BOOM END CAP H14/16 FWD
    Hobie
    Harken 22mm Block Murrays Part# 28-0224 This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    GOOSENECK DOWNHAUL RING H14/16
    Hobie
    BOOM BLOCK HANGER HOBIE
    Hobie
    Hobie 16 gooseneck bearing kit. Tren Tec. Murrays Marine. Hobie Cat part number #1511
    Murrays Gooseneck Bearing Kit Hobie 14 & 16 instructions
    GOOSENECK BEARING KIT H-14/16
    Tren-Tec
    MAST HEAD/BASE SHEAVE H18
    Hobie
    GOOSENECK SHACKLE H14/16
    Hobie
    E-CLIP GOOSENECK Hobie 16 (EA)
    Misc
    CLEVIS PIN 3/16 X 7/8
    Misc
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    CLEVIS PIN 1/4 X 5/8
    Misc
    Sealed Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Sealed Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231 Rivet and Hobie Cat® #8011291 rivet casing.
    RIVET CCP SEALED 6-8 (3/16 X 1/2)
    Misc
    ROLL PIN/ GOOSENECK BOOM PIN
    Misc
    Sealed Stainless Steel 3/16" x 3/8" Pan Head Rivet Murrays Part# 19-5032S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified: Hobie 14 (2) or 16 (4) mast head Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4) Hobie 14/16
    RIVET CCP SEALED 6-6 (3/16 X 3/8)
    Misc
    Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033 Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231.
    RIVET CCP 6-8 (3/16 X 1/2)
    Misc
    3/16 - 1/4" Split Ring Murrays Part# 22-9492 Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler Medium Split ring Dimensions: 5/8″ Diameter Material: 316 Stainless steel. This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
    SPLIT RING 3/16-1/4"
    Misc
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20
    Misc
    NUT SQUARE 10-32
    Hobie
    Cotter Pin 3/32 X 3/4 Murrays Part# 19-1015 Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111. Stainless steel cotter pin measures 3/32" x 3/4".
    COTTER PIN 3/32 X 3/4
    Misc