Hobie 14 Upgrades and Accessories

73 products

    Upgrades and Accessories for your Hobie 14

    73 products
    Out of Stock
    Ronstan Toggle Pin with Lanyard 1/4 X 5/8" Murrays Part# 21-1155L ​Stainless steel 1/4" diameter toggle pin replaces 5/8" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.
    RONSTAN TOGGLE PIN WITH LANYARD 1/4 X 5/8"
    Ronstan
    7"X17" Zip Pouch-Assorted Colors Murrays Part# 31-1402 The Murrays Zip Pouch 7"X17" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 72005B
    7"X17" ZIP POUCH-ASSORTED COLORS
    Murrays Sports
    5"X12" Zip Pouch-Assorted Colors Murrays Part# 31-1401 The Murrays Zip Pouch 5"X12" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 72005B
    5"X12" ZIP POUCH-ASSORTED COLORS
    Murrays Sports
    Halyard 5"X 9" Zip Pouch-Assorted Colors Murrays Part# 31-1400 The Murrays 5" x 9" zippered halyard pouch is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the tramp lacing. The off-center zipper is designed for easy stuffing of your boat's halyard. The pouch is also handy for storing replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 7
    HALYARD 5"X9" ZIP POUCH- ASSORTED COLORS
    Murrays Sports
    The Murrays Rudder Cam Sister Screws: Hobie 14, Hobie 16 are a pair of sister screws for Hobie 14 and 16 rudder cams. These pins are much easier to install and remove than the stock pin and they are reusable! Sold in pairs Hobie Cat Part# 10470000 Hobie Part# 5201
    The Murrays Rudder Cam Sister Screws: Hobie 14, Hobie 16 are a pair of sister screws for Hobie 14 and 16 rudder cams. These pins are much easier to install and remove than the stock pin and they are reusable! Sold in pairs Hobie Cat Part# 10470000 Hobie Part# 5201
    H-14/16 RUDDER CAM SISTER SCREWS
    Murrays Sports
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings.
    TELO-CAT REPLACEMENT VANE - DISCONTINUED
    Davis
    Quick Release Pin Deluxe  3/16 X 3/4" Murrays Part# 18-3M075 This Quick Release Pin features 2 locking balls for a extra secure grip, and a push button deluxe dished head with a hole for lanyard attachment. The Deluxe pin is quick and easy to remove and install, and makes getting on and off the water quicker and easier.
    QUICK RELEASE PIN DELUXE 3/16 X 3/4"
    Misc
    SUPER GOOSE H-17/18/20/21 This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing. The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model. Hobie part number 1510
    H-17/18/20/21 SUPER GOOSE
    Tren-Tec
    Hobie Shroud Adjuster Covers 11″ Pair are vinyl covers that protect the crew from metal shroud adjusters and can prevent de-masting by protecting the split rings. Includes two adjuster covers, one for each side of the boat. Available in white and black. Compatible with al beach cats: Nacra, Prindle, A-Cat, Dart, Sol Cat, G-Cat...
    11" SHROUD ADJUSTER COVERS
    Hobie
    Out of Stock
    Hobie Tiller End Cap Murrays Part# 50-10400010 Tiller arm end cap for Hobie Cats is a factory replacement part. Use two 6-6 rivets (item #19-5032) for installation.
    HOBIE TILLER END CAP
    Hobie
    Out of Stock
    Ronstan Toggle Pin 15.9mm Long 6.4mm Diameter Murrays Part# 21-1155 Replaces 1/4" diameter clevis pin of same grip length. Also available with a lanyard 21-1155L
    RONSTAN TOGGLE PIN 1/4 x 5/8"
    Ronstan
    Out of Stock
    Coffee Marine Bridle Vane Replacement Vane Murrays PN 001-7050-G Sensitive, rigid and light! The classic bridle vane for the Hobie 16 and other racing cats. These are made in our warehouse and will fit the Hobie Bridle Vane assembly or the classic Coffee Marine assemblies. The Coffee Marine vanes are slightly more rigid than the Hobie wind vane, making them last longer and less likely to flap in the wind. Compatible with Hobie Bridle vanes. Hobie part number CM7703
    Coffee Marine Bridle Vane Replacement Vane
    Murrays Sports
    Kit for Hobie® 14 or 16 includes 16 pieces: mast hinge pin, clevis pin assortment and split ring assortment. Compare to Hobie Cat® #30303.
    H-14/16 PINS AND RINGS KIT
    Murrays Sports
    Hobie trapeze shock cord 20730001 and 20730002
    H-14/16 TRAP SHOCK CORD
    Murrays Sports
    Rudder Return Kit for H14/16-Inter Murrays Part# 012-2049 This Rudder Return Kit for H14/16-Inter by Tren Tec eliminates kick-up. Rudders return to down position easily with one hand and tension holds rudder down if a cam fails. Accommodates both rudders. Use this page to order product numbers 12-2049 (for Hobie® 14/16/Inter; Hobie Cat® item #1544)) and 12-2059 (for Hobie 17/18/21)
    H-14/16 INTER RUDDER RETURN KIT
    Tren-Tec
    Harken Cleat Adapter with Hardware Murrays Part# 007-50010 Hobie Factory Part 50010
    CLEAT ADAPTER PLATE WITH HARDWARE
    Hobie
    EASY RIGG TOOL GREEN
    Murrays Sports
    EASY RIGG TOOL
    Easy-Rigg
    TRAMP CLAMP (10) Minimize chafing at trampoline stress points and reduce the possibility of the trampoline pulling out of the aluminum extrusion. Clamps slide into the aluminum extrusion track. 10 pieces, 1.5" long. By Tren Tec.™ Hobie Cat® uses #2066 for this item
    TRAMP CLAMP (10)
    Tren-Tec
    Ronstan bow shackle measurements
    RONSTAN 1/4" BOW SHACKLE
    Ronstan
    Hobie 16 gooseneck bearing kit. Tren Tec. Murrays Marine. Hobie Cat part number #1511
    Murrays Gooseneck Bearing Kit Hobie 14 & 16 instructions. Hobie Cat part number #1511
    H-14/16 GOOSENECK BEARING KIT
    Tren-Tec
    Out of Stock
    Mast Float Attachment Kit: H14/16 Murrays Part# 007-30116 This attachment kit for Hobie® 14 or 16 comes with Hobie® Mama and Baby Bobs, but is also offered separately here.
    H-14/16 MAST FLOAT ATTACHMENT KIT
    Hobie
    H14 Angled Luff Caps Murrays Part# 012-2006 No more battens poking through next to the mast. Tren Tec angled luff caps for Hobie® 14 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Part# 1561 Sold in packages of 6
    H-14 ANGLED LUFF CAPS (6)
    Tren-Tec
    Kisme Kleet (4) Murrays Part# 005-1010
    KISME KLEET (4)
    Misc
    H14/16 Rudder Return Hand Shock Cord Murrays Part# 001-2240 Two 32" shock cords with balls keep your Hobie® 14 or 16 rudders down when the cams don't! Order Kisme Kleets #05-1010 separately, if needed.
    H-14/16 RUDDER RETURN HAND SHOCK CORD
    Murrays Sports
    Ronstan Stainless Steel D Shackle, 3/16" Pin, Slotted Head Murrays Part# 21-0616 Ronstan stainless D shackle has 3/16" diameter pin. This shackle is a substitute for Hobie® item #11220000, #SP0051 and #SP0052.
    RONSTAN 3/16 D SHACKLE
    Ronstan
    Ronstan Clevis Pin Retaining Clip Murrays Part# 21-0413 The Ronstan Spring Clip is a stainless spring clip for quick rudder pin removal or Hobie 14, 16, 17, 18, 20, Wave and Getaway models. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie, Nacra and Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape. Ronstan Part# RF413
    RONSTAN CLEVIS PIN RETAINING CLIP
    Ronstan
    Rudder Stiffening Kit Murrays Part# 001-2053 The Rudder Stiffening Kit for all Hobies eliminates excessive clearances between rudders and castings which cause wobble and thwart rudder alignment. Kit has 4 stainless nylock nuts and 8 spacers. Compare to Hobie Cat® item #136.
    RUDDER STIFFENING KIT
    Murrays Sports
    Out of Stock
    Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000
    Hobie drain plug 10091000 Hobie 18
    HOBIE DRAIN PLUG WITH GASKET
    Misc
    Toggle Strap 12"-24" Murrays Part# 13-1020 Our handy toggle strap secures items with circumferences from 12" to 24". It is constructed of 1/8" shock cord that is secured with a 1-1/8" end stop. Sold individually Compare to Hobie Cat® Part# 370
    TOGGLE STRAP 12" - 24"
    Murrays Sports
    Wind Vane Replacement Tips and Washers  Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly! 
    WIND VANE REPLACEMENT TIPS & WASHERS
    Murrays Sports
    RUDDER PIN SPRING CLIP: 3/8
    Misc
    Recently viewed