Hobie 14 Rigging

29 products

    Running and Standing Rigging for your Hobie 14

    29 products
    RF DRUM ASSEMBLY (NO ADJUSTER)
    Hobie
    Harken 4:1 Mainsheet System
    Murrays Hobie wave main sheet system
    Harken 4:1 Mainsheet System
    Harken
    H-14 TURBO JIB BLOCK WIRE
    Murrays Sports
    HOBIE 14 MAIN HALYARD COMPTIP This main halyard is used to raise the main sail on a Hobie® 14 with CompTip on its mast. Constructed to factory specifications. Compare to Hobie Cat® #10657001.
    H-14 MAIN HALYARD COMPTIP
    Murrays Sports
    H-14 TURBO UP-FORESTAY W/SWIVEL
    Murrays Sports
    Hobie 14 Trapeze Wires - Hobie Part Number - BLACK 1475B - WHITE 1475W
    H-14 TRAPEZE WIRES (2)
    Murrays Sports
    HOBIE 14 MAIN HALYARD W/SHACKLE Main halyard with shackle for Hobie 14 with all-aluminum mast (no CompTip) is constructed to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie Cat® #10651001
    H-14 MAIN HALYARD W/SHACKLE
    Murrays Sports
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
    Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone
    CAN'T MISS RINGS
    Murrays Sports
    18SQ Forestay 5/32 Black Murrays Part# 002-5045-02 Black coated forestay for your NACRA 18 Square built to original specifications.
    H-14 FORESTAY 1/8
    Murrays Sports
    trapeze adjustment kit - 3102 - Murrays EZ Up Trap Kit
    EZ-UP TRAP KIT: NO-CUT (PR)
    Murrays Sports
    DART-18 SHROUD 5/32 BLACK Built by Murrays professionals to the factory specifications with 5/32"1x19 316 black PVC coated stainless steal wire. Made to order, usually ships same day.
    H-14 SHROUD 1/8
    Murrays Sports
    H-14 TURBO BRIDLE 1/8 One bridle for Hobie 14 Turbo constructed of 1/8" 1x19 wire to factory specifications. Turbo typically refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tramp jib block wire. Use this page to order product numbers: 02-0114-21 White (compare to Hobie Cat® #10820011) 02-0114-22 Black bridle for Hobie 14 Turbo (compare to Hobie Cat® #10822010 black) Murrays PN 002-0114-21 and 002-0114-22
    H-14 TURBO BRIDLE 1/8
    Murrays Sports
    H14 Bridle 1/8" One bridle for Hobie® 14 constructed of 1/8" 1x19 wire to factory specifications. Compare to Hobie Cat® #10822101. This is for Hobie 14s without jibs. Murrays PN 002-0114-01 002-0114-02
    H-14 BRIDLE 1/8
    Murrays Sports
    SINGLE BLOCK W/FERRULE
    Ronstan
    Shroud Adjuster Covers 11″ Pair are vinyl covers that protect the crew from metal shroud adjusters and can prevent de-masting by protecting the split rings. Includes two adjuster covers, one for each side of the boat.
    SHROUD ADJUSTER COVERS 11"
    Murrays Sports
    10 Hole Hobie shroud adjuster
    SHROUD STAY ADJUSTER 10-HOLE
    MISC
    Hobie trapeze shock cord 20730001 and 20730002
    TRAP SHOCK CORD H-14/16
    Murrays Sports
    SHACKLE BOW 5/16
    Ronstan
    SHROUD STAY ADJUSTER 7-HOLE
    Murrays Sports
    ELONGATED TRAPEZE RING  Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Murrays Sports
    1/4" Bow Shackle Ronstan PN RF635
    1/4" BOW SHACKLE
    Ronstan
    SHACKLE BOW 3/16
    Ronstan
    Rope Lock (Nylon) Murrays Part# 001-0120 Easy-to-adjust black rope lock commonly used for trapeze height adjustment. Standard rope stop on Hobie®, Nacra and Prindle. Double-up back-to-back for extra strength. Hobie part number 61530000 for this rope lock. Works on 3/16 to 1/4" line
    ROPE LOCK (NYLON)
    Murrays Sports
    CLEVIS PIN 3/16 X 7/8
    Misc
    Wind Vane Replacement Tips and Washers  Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly! 
    WIND VANE REPLACEMENT TIPS & WASHERS
    Murrays Sports
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    CLEVIS PIN 1/4 X 5/8
    Misc
    3/16 - 1/4" Split Ring Murrays Part# 22-9492 Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin.  This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler Medium Split ring Dimensions: 5/8″ Diameter Material: 316 Stainless steel. This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans.
    SPLIT RING 3/16-1/4"
    Misc
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20
    Misc
    Cotter Pin 3/32 X 3/4 Murrays Part# 19-1015 Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111. Stainless steel cotter pin measures 3/32" x 3/4".
    COTTER PIN 3/32 X 3/4
    Misc