Hobie 14 Mast Parts

49 products

    Mast Parts for your Hobie 14

    49 products
    COMPTIP H14 ASSY (OS)
    Hobie
    Downhaul Kit: 6:1 Hobie 14/16 Murrays Part# 007-2089 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo block. Includes Class-approved attachment for base of mast, all hardware and line. Use with gooseneck bearing kit (#12-2050). Hobie Part# 2089
    Downhaul Kit: 6:1 Hobie 14/16 Murrays Part# 007-2089 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo block. Includes Class-approved attachment for base of mast, all hardware and line. Use with gooseneck bearing kit (#12-2050). Hobie Part# 2089
    H-14/16 6:1 DOWNHAUL KIT
    Murrays Sports
    The Hobie Baby Bob Mast Float is designed to offer the safety and security of mast head flotation with minimized drag through the air, the Baby Bob is fixed in position to the mast head with the included mounting hardware. The Baby Bob is standard on all Hobie Waves This float will also fit the Getaway and Hobie 16 with or without CompTip. Some drilling may be necessary. The larger Mama Bob (#07-30119) is also an option for most Hobies. The Baby Bob Mast Float displaces 32 pounds of water, is 20" long x 1
    MAST FLOAT WAVE BABY BOB
    Hobie
    H14/16 Mast Bearing (Pack of 100) Murrays Part# 001-2042 Teflon® mast bearings for Hobie® 14 or 16 are .06" thick and will form to mast base with first use. Package of 100 mast chips.
    H14/16 MAST BEARING (100-PKG)
    Murrays Sports
    H14/16 6:1 Downhaul Kit Murrays Part# 007-2089-1 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo blocks.  Includes: Class-approved mast track attachment, all hardware and line. Recommended for use with gooseneck bearing kit (#012-2050) Hobie Part# 2089
    Downhaul Kit: 6:1 Hobie 14/16 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo blocks. Includes: Class-approved mast track attachment, all hardware and line. Recommended for use with gooseneck bearing kit (#012-2050). Hobie part number 2089
    H-14/16 6:1 DOWNHAUL KIT
    Murrays Sports
    Out of Stock
    H14 and Wave Comptip Masthead Murrays Part# 50-10602111 This is a replacement masthead for a Hobie 14 or Hobie Wave.
    H-14 AND WAVE COMPTIP MASTHEAD
    Hobie
    COMP-TIP LUFF TRACK (NO Hobie 16)87"
    Hobie
    HOBIE 14 MAIN HALYARD COMPTIP This main halyard is used to raise the main sail on a Hobie® 14 with CompTip on its mast. Constructed to factory specifications. Compare to Hobie Cat® #10657001.
    H-14 MAIN HALYARD COMPTIP
    Murrays Sports
    Out of Stock
    H14/Wave Mast Base Murrays Part# 50-10640011 Hobie® factory replacement black mast base for Hobie® 14 or Wave. Use four 6-6 rivets (#19-5032) for installation.    
    H14/WAVE MAST BASE
    Hobie
    HOBIE 14 MAIN HALYARD W/SHACKLE Main halyard with shackle for Hobie 14 with all-aluminum mast (no CompTip) is constructed to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie Cat® #10651001
    H-14 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    H16/18/Getaway Mast Tang Murrays Part# 50-20690000 Hobie® factory replacement mast tang for Hobie® 16, 18, Getaway and the 1995 and newer Hobie® 17. Use twelve 6-4 rivets (#19-5031) and twelve casings (#19-5020) for installation. Also known as a mast hound
    H-16/18/GETAWAY MAST TANG
    Hobie
    Mast Rotation Control Arm Murrays Part# 25-3040 Stainless mast rotation control arm is strong and smooth! Arm #25-3040 with 1/4″ hole is for all Hobies except for the Hobie® 17, Prindles and Nacras; Arm #25-3041 with 5/16″ hole is for Nacras, Prindles and the Hobie® 17. H17 uses #19-2235 bolt Hobie Part# 61210001
    MAST ROTATION CONTROL ARM
    Murrays Sports
    Downhaul Kit: H14/16 Murrays Part# 001-1028 This class legal 3:1 downhaul kit for Hobie® 14 or Hobie 16 includes Harken bullet block with becket and swivel, and 6 feet of 3/16" low-stretch, 8-strand line. This kit works with the stock downhaul horn cleat at the base of the mast. This is a fantastic economical and simple solution for the recreational sailor. Hobie part number 2081
    Downhaul Kit: H14/16 Murrays Part# 001-1028 This class legal 3:1 downhaul kit for Hobie® 14 or Hobie 16 includes Harken bullet block with becket and swivel, and 6 feet of 3/16" low-stretch, 8-strand line. This kit works with the stock downhaul horn cleat at the base of the mast. This is a fantastic economical and simple solution for the recreational sailor. Hobie part number 2081
    H-14/16 DOWNHAUL KIT
    Murrays Sports
    MAST STEP LINK KIT H14/16 Hobie part number 21380001
    H-14/16 MAST STEP LINK KIT
    Hobie
    H14 Mast Spinnaker Tang Murrays Part# 50-10690000 Hobie® factory replacement spinnaker tang or mast tang for Hobie 14 or Wave. Use six 6-4 rivets (#19-5031) and six 6-4 casings (#19-5020) for installation.
    H-14 MAST SPINNAKER TANG
    Hobie
    H14 Masthead Sheave The Hobie 14 Mast head sheave - Old Style is the large plastic pulley sheave. Replacement for the sheave in the original all aluminum Hobie 14 mast that has a single large sheave in the mast head. Hobie 14 pre comptip masthead sheave. Measures 4" x 3/8" with a 3/8" hole. ​Requires a 3/8" x 1.5" clevis pin or bolt to install or the 51-14041713 Mast Head Sheave Pin. Hobie part number 14041712
    H-14 Masthead Sheave
    Hobie
    V JAM CLEAT BOOM (3/16" HOLES)
    Hobie
    SUPER GOOSE H-17/18/20/21 This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing. The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model. Hobie part number 1510
    H-17/18/20/21 SUPER GOOSE
    Tren-Tec
    Quick Release Pin Standard 3/16 X 3/4" Murrays Part# 18-3R075 This quick-release pin has a standard head with a pull ring. Use two for convenient connection of jib sheet blocks on Nacra and Inter cats. Measurements are 3/16" diameter x 3/14" maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE PIN STANDARD 3/16 X 3/4"
    Misc
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Hobie Sail Feeder Kit Murrays Part# 50-80100501 Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie®'s Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    HOBIE SAIL FEEDER KIT
    Hobie
    Hobie Gooseneck Hinge Vertex Murrays Part# 50-50772031 Hobie® factory replacement gooseneck vertex for all Hobie® Cats. Hobie Part# 50772031
    HOBIE GOOSENECK HINGE VERTEX
    Hobie
    H14/16 Main Halyard Hook Murrays Part# 25-3330 The main halyard hook is used on the Hobie 14, Hobie 16, Wave, Getaway, Prindles, Sol Cats and Nacras that use a wire halyard. Use two 6-4 rivets (#19-5031) and two casings (#19-5020) for installation. Hobie part# 10680000
    H-14/16 MAIN HALYARD HOOK
    Hobie
    Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole Murrays Part# 21-0636 The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081. Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
    RONSTAN 5/16" BOW SHACKLE
    Ronstan
    Downhaul Cleat with Screws Murrays Part# 001-1020 The Downhaul Cleat Kit is for mounting in mast track (such as Hobie 16) and includes cleat, screws and channel inserts. Center-to-center hole spacing is 1-1/8". We have another kit for the halyard cleats on the side of the mast that includes rivets.
    DOWNHAUL CLEAT WITH SCREWS
    Murrays Sports
    Halyard Cleat Kit with Rivets Murrays Part# 001-1019 The Murrays Halyard Cleat Kit with Rivets pulls the halyard out of the way to keep the battens from hanging up on the halyard of an H16. The kit includes the halyard cleat and sealed stainless rivets. Center-to-center hole spacing is 31mm. *Photo is out of date and kit no longer comes with casings as the rivets that are included come sealed. Compare to Hobie Cat Part 10730000
    HALYARD CLEAT KIT WITH RIVETS
    Murrays Sports
    Mast Float Attachment Kit: H14/16 Murrays Part# 007-30116 This attachment kit for Hobie® 14 or 16 comes with Hobie® Mama and Baby Bobs, but is also offered separately here.
    H-14/16 MAST FLOAT ATTACHMENT KIT
    Hobie
    Hobie 16 mast bearings. Teflon mast chips, Hobie part number 11110005
    Hobie mast chips - 11110005
    H-14/16 MAST BEARING (3-PKG)
    Murrays Sports
    Mast Cleat Murrays Part# 011-6481 The Mast Cleat is a can be used as a downhaul / halyard cleat on a Hobie 14 and or 16. Compare to Hobie Cat® factory item #10730000. 31mm Center to Center.
    MAST CLEAT
    Murrays Sports
    Ronstan Stainless Steel Bow Shackle, 3/16" Pin, Coined Head Murrays Part# 21-0634 Solid stainless steel bow shackle has 3/16" diameter pin.  UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin.
    RONSTAN STAINLESS STEEL BOW SHACKLE, 3/16" PIN, COINED HEAD
    Ronstan
    H-14/16 FOAM PLUG FOR PYLON
    Hobie
    Murrays Part# 007-1051 The standard replacement deck plate for the traveler on all Hobie® 14, 16 and newer 17's. Hobie Cat® factory item #11870000.  Uses a 3/16 x 1/2" clevis pin to attach to the main sheet system. Also used in Hobie 14 and Hobie 16 upgrade downhaul systems to secure lower block. Sold individually
    TRACKER DECK PLATE (EA)
    Hobie
    3/16 X 7/8" Clevis Pin Murrays Part# 22-9806 3/16 x 7/8 Clevis Pin.  H16 gooseneck shackle clevis pin. Hobie Part# 8020061
    3/16 X 7/8" CLEVIS PIN
    Misc
    3/16 X 1/2" Clevis Pin Murrays Part# 22-9801 Stainless steel clevis pin measures 3/16" diameter x 1/2" grip length (shoulder to the split ring hole). Prindle / Nacra Part# 9412 Compare to Hobie Cat® Part# 8020041
    3/16 x 1/2" CLEVIS PIN
    Misc
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    1/4 X 5/8" CLEVIS PIN
    Misc
    Out of Stock
    Black Mast Caution Decal Murrays Part# 50-13440000 The Decal Mast Caution Black Hobie® factory caution decal attaches to mast as a reminder to watch for overhead power lines when sailing and/or launching your boat.
    BLACK MAST CAUTION DECAL
    Hobie
    Decal Mast Caution Orange Murrays Part# 13440010 Hobie® factory decal attaches to mast as a reminder to watch for overhead power lines when sailing and/or launching your boat. Hobie Part# 13440010
    ORANGE MAST CAUTION DECAL
    Hobie
    Sealed Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Sealed Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231 Rivet and Hobie Cat® #8011291 rivet casing.
    RIVET CCP SEALED 6-8 (3/16 X 1/2)
    Misc
    Sealed Stainless Steel 3/16" x 3/8" Pan Head Rivet Murrays Part# 19-5032S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified: Hobie 14 (2) or 16 (4) mast head Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4) Hobie 14/16
    RIVET CCP SEALED 6-6 (3/16 X 3/8)
    Misc
    Hobie rivet casings sleeves seal rivets to prevent water penetration. When used with a rivet they seal the hole to prevent water from getting through the center of the rivet. Rivet Casings are recommended for use on all rivets on the mast to keep the mast water tight. Compatible with all 3/16 diameter rivets up to 5/8" long. Compatible with all rivets on Hobie, Nacra and Prindle catamarans except traveler tracks. Requires 13/64" hole. Hobie part number 8011291, 8011290, also called rivet cap.
    RIVET CASING 6-10(3/16 X 5/8)
    Hobie