Hobie Getaway rigging, Halyard, Shrouds, Bridle, Forestay made to order - Murrays.com

Getaway Rigging Parts

24 products

    Standing and Running Rigging for your Hobie Getaway

    24 products
    Out of Stock
    HOBIE ROLLER FURLER DRUM ASSEMBLY
    Hobie
    Getaway Main Halyard Murrays Part# 002-0973-60 The Murrays Hobie Getaway main halyard for is constructed to the current factory specs. It has a long rope section and a shorter wire section with a stopper and halyard shackle. The rope section is easy on the hands and prevents electrical current from traveling down the mast in the event of an electrical wire contact.
    GETAWAY MAIN HALYARD
    Murrays Sports
    The Murrays Hobie Getaway line package contrains all the lines on a Hobie Getaway. The Main and Jib sheets are Robline Neptune 500 and the control lines are Pelican VLS, Very Low Stretch.
    H-GETAWAY LINE PACKAGE
    Murrays Sports
    Getaway Forestay 5/32" Black Wire Murrays Part# 002-0945-12 The Hobie Getaway forestay is made with 5/32" black vinyl coated type 316 stainless steel wire and fittings. This forestay is compatible with all generations of Hobie Getaways. Compare to Hobie Cat Part# 37810001
    GETAWAY FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    Getaway Trapeze Wire (2 Handles) Murrays Part# 002-0953-02 The Murrays Getaway Trapeze is a set of 2 black or white coated trap wires with 2 handles for trapezing. Order shock cord, harness loops and adjustment kits separately.
    GETAWAY TRAPEZE BLACK WIRE (2)
    Murrays Sports
    Out of Stock
    The tune-up kit for Hobie® roller furling drum 61900000 includes all of the items that commonly wear or break (bearings, bearing cage, nyliner, nylon sleeve, darby rings, spool and housing). Murrays.com
    HOBIE ROLLER FURLER TUNE-UP KIT
    Hobie
    Ronstan Eye & Eye Swivel Murrays Part# 21-0078 This ball bearing swivel by Ronstan has lower friction and higher working loads than non-ball bearing versions. It is used in conjunction with blocks and rigging systems to provide articulation and rotation. Not suitable for high-speed rotating applications.
    RONSTAN EYE & EYE SWIVEL
    Ronstan
    Getaway Shroud 5/32" Black Wire Murrays Part# 002-0905-02 Single black shroud (sidestay) for Hobie® Getaway is constructed to factory specifications. Compare to Hobie Cat® Part# 37790001
    GETAWAY SHROUD 5/32" BLACK WIRE
    Murrays Sports
    Getaway Bridle 5/32" Black Wire Murrays Part# 002-0915-22 One black bridle for Hobie® Getaway is constructed to factory specifications. We recommend ordering two to ensure equal lengths. Compare to Hobie Cat® Part# 37822011
    GETAWAY BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    trapeze adjustment kit - 3102 - Murrays EZ Up Trap Kit
    EZ-UP TRAP KIT: NO-CUT (PR)
    Murrays Sports
    The Murrays Pins & Rings Kit: Hobie Wave + Getaway includes the most often used spare clevis pins and split rings for the Hobie Wave and Hobie Getaway. Compare to Hobie Part # 30302
    Pins & Rings Kit: Hobie Wave, Getaway
    Murrays Sports
    Ronstan Single Block, Ferrule Murrays Part# 21-0469 This is the original clew block on most of the old Hobie cat Sailboats. This will work as a replacement jib clew block for Hobie® 14, 16 and 18 cats. Lightweight stainless block with ferrule has 1-1/8" x 5/8" sheave diameter, Delrin bearing and 1/2" line capacity. SWL: 950 lbs. This is a great option if you're looking to use a larger line diameter on your sheets or want the classic look.
    RONSTAN SINGLE BLOCK, FERRULE
    Ronstan
    10 Hole Hobie shroud adjuster
    SHROUD STAY ADJUSTER 10-HOLE
    MISC
    Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole Murrays Part# 21-0636 The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081. Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
    RONSTAN STAINLESS STEEL BOW SHACKLE, 5/16" PIN, COINED HEAD WITH HOLE
    Ronstan
    SHROUD STAY ADJUSTER 7-HOLE
    Murrays Sports
    Trap Shock Cord: Nacra, Prindle, Sol Cat and Getaway Murrays Part# 001-8019 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. A plastic carbine hook is installed on one end only; the other hook is included to be installed after the shock cord is put on the boat. Cord is 1/4" d
    TRAP SHOCK CORD: NAC/PRIN/SOL/GET
    Murrays Sports
    Yoke Getaway Forestay
    Hobie
    Ronstan Stainless Steel D Shackle, 3/16" Pin, Slotted Head Murrays Part# 21-0616 Ronstan stainless D shackle has 3/16" diameter pin. This shackle is a substitute for Hobie® item #11220000, #SP0051 and #SP0052.
    RONSTAN STAINLESS STEEL D SHACKLE, 3/16" PIN, SLOTTED HEAD
    Ronstan
    Wind Vane Replacement Tips and Washers  Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly! 
    WIND VANE REPLACEMENT TIPS & WASHERS
    Murrays Sports
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    CLEVIS PIN 1/4 X 5/8
    Misc
    CLEVIS PIN 1/4 x 3/8
    Misc
    3/16 - 1/4" Split Ring Murrays Part# 22-9492 Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler Medium Split ring Dimensions: 5/8″ Diameter Material: 316 Stainless steel. This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
    SPLIT RING 3/16-1/4"
    Misc
    Roller Furler Drum Ball Bearing Murrays Part# 50-61670000 Hobie® factory replacement bearing for Hobie roller furler. A total of 18 ball bearings are required per furler.
    RF DRUM BALL BEARING H18 (EA)
    Hobie
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20
    Misc