Getaway Mast Parts

34 products

    Mast Parts for your Hobie Getaway

    34 products
    Out of Stock
    MAST GETAWAY LOWER
    Hobie
    COMPTIP GETAWAY
    Hobie
    Mast Float Mama Getaway Murrays Part# 007-30119
    MAST FLOAT MAMA GETAWAY
    Hobie
    GETAWAY LUFF TRACK 102"
    Hobie
    Getaway Main Halyard Murrays Part# 002-0973-60 The Murrays Hobie Getaway main halyard for is constructed to the current factory specs. It has a long rope section and a shorter wire section with a stopper and halyard shackle. The rope section is easy on the hands and prevents electrical current from traveling down the mast in the event of an electrical wire contact.
    GETAWAY MAIN HALYARD
    Murrays Sports
    Out of Stock
    Mast Head Getaway
    Hobie
    Out of Stock
    MAST BASE CSTG GETAWAY
    Hobie
    MAST TANG Hobie 16/18/GETAWAY
    Hobie
    The Murrays Pins & Rings Kit: Hobie Wave + Getaway includes the most often used spare clevis pins and split rings for the Hobie Wave and Hobie Getaway. Compare to Hobie Part # 30302
    Pins & Rings Kit: Hobie Wave, Getaway
    Murrays Sports
    GETAWAY MAST HEAD SHEAVE Replacement Hobie Getaway mast head sheave. Hobie part number 37611001
    GETAWAY MAST HEAD SHEAVE
    Hobie
    Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole Murrays Part# 21-0636 The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081. Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
    RONSTAN STAINLESS STEEL BOW SHACKLE, 5/16" PIN, COINED HEAD WITH HOLE
    Ronstan
    MAST FLOAT MOUNT PLATE
    Hobie
    Halyard Cleat Kit with Rivets Murrays Part# 001-1019 The Murrays Halyard Cleat Kit with Rivets pulls the halyard out of the way to keep the battens from hanging up on the halyard of an H16. The kit includes the halyard cleat and sealed stainless rivets. Center-to-center hole spacing is 31mm. *Photo is out of date and kit no longer comes with casings as the rivets that are included come sealed. Compare to Hobie Cat Part 10730000
    HALYARD CLEAT KIT W/ RIVETS
    Murrays Sports
    DOWNHAUL CLEAT W/SCREWS
    Murrays Sports
    Mast Cleat Murrays Part# 011-6481 The Mast Cleat is a can be used as a downhaul / halyard cleat on a Hobie 14 and or 16. Compare to Hobie Cat® factory item #10730000. 31mm Center to Center.
    MAST CLEAT - 10730000
    Murrays Sports
    Mast Step Pin Wave/Getaway .25 x 2" Detent Murrays Part# 50-8020451 Replacement mast step pin / mast hinge pin for a Hobie Wave and Getaway. 1/4" x 2" detent pin.   Hobie part # 8020451
    MAST STEP PIN .25x2 DETENT
    Hobie
    Quick-Release Pin Detent 1/4 X 1-1/2 Murrays Part# 18-4D150 The Quick-Release Pin Detent 1/4 X 1-1/2 is an economical, quick connection for Hobie 16 mast step pin. A spring-loaded ball exerts sufficient pressure to help avoid accidental release. Measurements are 1/4″ diameter x 1-1/2″ maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE DETENT PIN 1/4 X 1.5
    Misc
    Murrays Part#  007-1051 The standard replacement deck plate for the traveler on all Hobie® 14, 16 and newer 17's. Hobie Cat® factory item #11870000.  Uses a 3/16 x 1/2" clevis pin to attach to the main sheet system. Also used in Hobie 14 and Hobie 16 upgrade downhaul systems to secure lower block. Sold individually
    TRACKER: DECK PLATE (EA)
    Hobie
    Out of Stock
    Hobie 16 Masthead Sheave Spacer
    Hobie
    CLEVIS PIN 3/16 X 1/2
    Misc
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    CLEVIS PIN 1/4 X 5/8
    Misc
    CLEVIS PIN 1/4 x 3/8
    Misc
    Out of Stock
    DECAL MAST CAUTION BLACK
    Hobie
    Decal Mast Caution Orange Murrays Part# 13440010 Hobie® factory decal attaches to mast as a reminder to watch for overhead power lines when sailing and/or launching your boat. Hobie Part# 13440010
    DECAL MAST ORANGE
    Hobie
    Sealed Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Sealed Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231 Rivet and Hobie Cat® #8011291 rivet casing.
    RIVET CCP SEALED 6-8 (3/16 X 1/2)
    Misc
    Rivet Casing 6-10(3/16 X 5/8) Murrays Part# 19-5020 Hobie part number 8011291 Rivet sleeve that seals rivets, to prevent water from passing through them.; Recommended for all mast rivets on the mast.
    RIVET CASING 6-10(3/16 X 5/8)
    Misc
    SCREW 10-32 X 1-1/4 PHMSP
    Misc
    Nut Nylock 5/16-18 Stainless Steel Murrays Part# 19-2520 5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut Used with Hobie Getaway Bow Tang Bolt
    NUT NYLOCK 5/16-18 (SS)
    Misc
    Out of Stock
    3/16 - 1/4" Split Ring Murrays Part# 22-9492 Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler Medium Split ring Dimensions: 5/8″ Diameter Material: 316 Stainless steel. This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
    SPLIT RING 3/16-1/4"
    Misc
    Screw RHMS 1/4-20 X 1/2" Stainless Steel Murrays Part# 19-3019 Stainless steel, Phillips pan head 1/4-20 x 1/2" machine screw is used to fasten mast bearing on post-1990 Hobie® 18. Compare to Hobie Cat® #8032011
    SCREW RHMS 1/4-20 X 1/2" (SS)
    Misc
    NUT NYLOCK LOPRO 1/4-20
    Misc
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20 SS
    Misc
    Nut Nylock #10-32 Stainless Steel Thick Murrays Part# 19-2515 Mainsheet block replacement nut. The stainless hex nut with nylock insert will not rust or work loose if properly installed. Fits Hobie Main Traveler Car. Fits Hobie Tiller Hinge Screw. Fits Hobie Masthead Sheave Screw H16 Hobie Getaway Compare to Hobie Part Number 8050201
    NUT NYLOCK #10-32 (SS) THICK
    Misc
    Screw PHMS #10-32 X 1 Stainless Steel Slot Head Murrays Part# 19-2915 Stainless steel, pan head #10-32 x 1" machine screw with slot is used as dolphin striker screw on all Prindles. Replaces Murrays item #56-F112. Also used in some Hobie Applications, compare to 8030111 Hobie Part. Applications: H18/18 SX/16 and Getaway Tiller Hinge Screw: 2
    SCREW PHMS #10-32 X 1" (SS)
    Misc