Getaway Hull Parts

20 products

    This collection includes parts for the hulls of your Hobie Getaway

    20 products
    Out of Stock
    Cooler Lid Getaway Murrays Part# 50-37370021 Hobie Part# 37370020 (formerly 37370021)
    COOLER LID GETAWAY
    Misc
    EZ Lock Upper Pintle Murrays Part# 50-90880211 Hobie® factory replacement upper pintle for EZ Loc rudder system. Fits Hobie Bravo and Getaway boats Hobie Part# 90880211
    EZ LOCK UPPER PINTLE
    Hobie
    EZ Lock Lower Pintle Murrays Part# 50-90880221 Hobie® factory replacement lower pintle for EZ Loc rudder system. Fits Hobie Bravo, wave and Getaway boats Hobie Part# 90880221
    EZ LOCK LOWER PINTLE
    Hobie
    Hobie Pre EZ Loc Upper Pintle Murrays Part# 50-38101301 Replacement upper pintle assembly for Hobie Wave and Hobie Getaway sailboats using the pre EZ loc style rudder assembly. Original Equipment on Hobie Wave and Hobie Getaway sailboats Upper pintle should be mounted with two (2) screws Use Part# 8030171 for boats 2008 and older, or Part# 8030331 for 2009 and newer If you have an EZ Loc style assembly, use the Hobie EZ loc upper pintle part# 90880211 Hobie Cat Part # 38101301
    HOBIE PRE EZ LOC UPPER PINTLE
    Hobie
    Hobie Wave Lower Pintle Murrays Part# 50-38101401 Hobie® factory replacement lower pintle for Wave or Bravo or Getaway Pre-EZ Loc Rudder Systems. Lower pintle assembly for Hobie Wave sailboat. Original Equipment on all Hobie Wave sailboats. Lower pintle should be mounted with four (4) screws. Use Part # 8030171 for boats 2008 and older, or Part # 8030331 for 2009 and newer. Hobie Cat Part # 38101401
    WAVE LOWER PINTLE
    Hobie
    Murrays Part# 001-1195WH 5" Flat Access Port The 5" Flat Access Port is designed to install on a flat surface. Each hatch includes one deck ring and one lid. A lip accommodates a Cat Bag (sold separately). For Hobie® 20 and Tiger. This also fits the NACRA 15 and fits much like the VIKING access ports. Customers tend to prefer this style to the ports that became stock in 2018. Does not include hardware, hardware options shown in the related items section below. Compare to NACRA part number 30365 Compare
    5" PORT FLAT SCREW WITH LIP WHITE
    Sea Dog
    H14/16 Bow Tang Murrays Part# 50-20120000 Hobie® factory replacement bow tang for Hobie® 14, 16 or Getaway. Use #19-3530 screw and #19-2520 nylock nut on Hobie 16; use #19-3530 screw on Hobie 14. The original Hobie® 14 tang is no longer available. 20120010
    H-14/16 BOW TANG
    Hobie
    Hobie Wave Keeper Pin With Lanyard Murrays Part# 50-38490011 Hobie® factory replacement keeper wire with pin for Wave and Getaway. Hobie part# 38490011
    WAVE KEEPER PIN WITH LANYARD
    Hobie
    Wave/Getaway Shroud Anchor Plate Murrays Part# 50-39100011 Hobie® factory replacement shroud anchor chain plate for Club Wave or Getaway. The Club Wave has a three-piece trampoline and shrouds and bridles connect with clevis pins. Current boats use two plates per side. Hobie Part# 39100011
    WAVE/GETAWAY SHROUD ANCHOR PLATE
    Hobie
    Clamcleat Racing Mini Murrays Part# 27-1222 The CL222 Racing Mini aluminum Clamcleat® is small, neat and lightweight and can be fixed to horizontal or vertical surfaces. It is a very useful cleat for small dinghies, and is also used in kiteboarding on bars and for adjusting the 5th line on kites.
    CLAMCLEAT RACING MINI
    Clamcleat
    MURRAYS HOBIE 20 DRAIN PLUG
    MURRAYS H-20 DRAIN PLUG
    Hobie
    Quick Release Pin Detent 1/4 X 1" Murrays Part# 18-4D100 This quick pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measures 1/4" diameter x 1" long. Can be used to replace 1/4" clevis pins up to 1" long.  Not recommended for use in shroud adjusters or chain plates.
    QUICK RELEASE PIN DETENT 1/4 X 1"
    Misc
    Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000
    Hobie drain plug 10091000 Hobie 18
    DRAIN PLUG WITH GASKET
    Misc
    Screw 12x24x1 Pan Head (Long Lock) Murrays Part# 50-8030402 This screw is used to hold the rudder gudgeons on the back of the boat.  Hobie Part# 8030402
    SCREW 12x24x1 PAN HEAD (LONG LOCK)
    Hobie
    Screw 1/4-20 x 5/8 PHMS-P Stainless Steel Murrays Part# 50-8030331 This screw is used on the Hobie wave to secure the eye straps to the inner edge of the crossbars for connecting the tramp pulleys on the classic wave or "other" on the club version.
    SCREW 1/4-20 x 5/8" PHMS-P SS
    Hobie
    Rivet CCP 6-10 (3/16 X 5/8) Murrays Part# 19-5034 Stainless steel 3/16" x 5/8" rounded pan head rivet. Compare to Hobie Cat® #8010121. Halyard mast cleat rivet
    RIVET CCP 6-10 (3/16 X 5/8)
    Misc
    Nut Nylock 5/16-18 Stainless Steel Murrays Part# 19-2520 5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut Used with Hobie Getaway Bow Tang Bolt
    NUT NYLOCK 5/16-18 (SS)
    Misc
    Screw #10 x 1/2 PHSMS-P Murrays Part# 50-8031151 Hobie Part# 8031151
    SCREW #10 x 1/2 PHSMS-P
    Hobie
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20 SS
    Misc
    Cotter Pin 3/32 X 3/4 Murrays Part# 19-1015 Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111. Stainless steel cotter pin measures 3/32" x 3/4".
    COTTER PIN 3/32 X 3/4" SS
    Misc