Murrays Marine - Catamaran specialists

All

3135 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3135 products
    3/32 TURNBUCKLE STUD
    WIRE STUD RIGHT 1/8" (SS)
    Misc
    WIRE STUD LEFT 1/8" (SS)
    Misc
    Out of Stock
    H-17 INSIDE WING TUBE
    Hobie
    Out of Stock
    Getaway Wing Set With Cover Murrays Part# 50-37001000 These are perfect for lazy day sailing, relaxed hiking out on your Hobie Getaway or for high performance fun. Turquoise vinyl mesh covers aluminum extrusions that are contoured to make a very comfortable back rest or seat. Remove two quick pins per side and they rotate in for trailering. Hobie Cat Part# 37001000
    GETAWAY WING SET WITH COVER
    Hobie
    GETAWAY WING LEG ASSEMBLY
    Hobie
    Out of Stock
    H-17 REAR WING CASTING-BLACK
    Hobie
    Out of Stock
    H-17 WING CAP (EACH)
    Hobie
    WING CAST FRONT H17 BK
    Hobie
    West System Maxi Epoxy Repair Pack Murrays Part# 40-4102 Use the West System Maxi Epoxy Repair Pack for dings and delamination repair. It gives you three times as much resin as the small kit. The kit contains six 105 Resin/205 Hardener packets, fairing filler, high-density adhesive filler, a 4" x 12" 9 oz fiberglass tape, two application brushes, one syringe, two pipe cleaners, four mixing sticks, one pair of disposable gloves, four cleaning pads, mixing cups and illustrated instructions.
    WEST SYSTEM MAXI EPOXY REPAIR PACK
    West Marine
    West System 205 Fast Hardener Murrays Part# 40-4103 West System 205 Fast Hardener® is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with West System 105 Resin (#40-4103) in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating
    WEST SYSTEM 205 FAST HARDENER 7OZ
    West Marine
    WAVE LOWER MAST
    Hobie
    WAVE MAST ASSEMBLY (2 PIECE)
    Hobie
    Out of Stock
    Wave Bridle with Hook 1/8" Discontinued by Hobie This item is not longer available from Hobie Hobie Part# 38822011
    WAVE BRIDLE WITH HOOK 1/8"
    Hobie
    Out of Stock
    WAVE BACKREST BLUE (PAIR)
    Hobie
    Washer Flat 1/2 X 7/8 Murrays Part# 50-8080601 Hobie® factory replacement 1/2" x 7/8" washer. Hobie Part# 8080601
    WASHER FLAT 1/2 X 7/8"
    Hobie
    Washer Stainless Steel 5/8 X 1-5/16" Murrays Part# 50-8080711 Hobie® factory replacement stainless steel 5/8" x 1-5/16" washer. This is the dolphin striker washer on Hobie 20 Miracle and is also used on the Hobie Getaway mast step system. Hobie Part# 8080711
    WASHER SS 5/8 X 1-5/16"
    Hobie
    Washer Nylon 5/16" Murrays Part# 50-8080681 Washer for tiller connector rod #50-40530001. Hobie® factory item. Hobie Part# 8080681
    WASHER NYLON 5/16"
    Hobie
    NACRA V-JAM CLEAT (1/4" HOLES)
    NACRA
    Vertical Pole Tang Murrays Part# 56-1045 The vertical pole tang is part of the Prindle 19MX Conversion Kit. Performance Sports factory item #1045 is limited to stock on hand.
    NACRA VERTICAL POLE TANG
    NACRA
    Out of Stock
    VELOCITEK SPEEDPUCK
    Misc
    Velocitek Spare Mounting Cradle for Speed Puck Murrays Part# 49-0051-1 Velocitek's snap-in mounting cradle for the Speed Puck allows use with the ProStart mast bracket or any Tacktick Micro Compass bracket. The mounting cradle is included with new Velocitek Speed pucks and is also available separately.
    VELOCITEK SPARE MOUNTING CRADLE FOR SPEED PUCK
    Misc
    Out of Stock
    VELOCITEK PRO START
    Murrays Sports
    Nacra Upper Pintle 570/580 Murrays Part# 56-1007 Upper pintle for Nacra 570 and 580 is Nacra Sailing factory item #30005.
    NACRA UPPER PINTLE 570/580
    NACRA
    Wire 5/32" 1X19 Bare 316 Stainless Steel 316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. Ideal for manufacturing long lasting bridals, shrouds and stays. Features 316 Stainless Steel Stiff and Low Stretch Highly Polished for Marine Use One Strand Consisting of 19 Wires Sold by the foot
    WIRE 5/32" 1X19 BARE 316 SS
    Misc
    316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. Ideal for manufacturing long lasting bridals, shrouds and stays. Features 316 Stainless Steel Stiff and Low Stretch Highly Polished for Marine Use One Strand Consisting of 19 Wires Sold by the foot
    WIRE 3/32" 1X19 BARE SS
    Misc
    316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. Ideal for manufacturing long lasting bridals, shrouds and stays. Features 316 Stainless Steel Stiff and Low Stretch Highly Polished for Marine Use One Strand Consisting of 19 Wires Sold by the foot
    WIRE 1/8" 1X19 BARE 316 SS
    Misc
    Out of Stock
    TUFF LE BLADDER 32'
    Murrays Sports
    Out of Stock
    H20 & Getaway Swivel Travel Cam Plate Murrays Part# 50-37760041 Hobie® factory replacement swivel cam plate for Getaway. This bent plate is also used on the Hobie® 20 to convert mainsheet traveler control to Hobie® 16/18 style with control cleat (360-degree swivel cam) on main rear beam instead of on mainsheet traveler car. This is your answer to preventing the traveler from coming toward you when you're trying to pull in the mainsheet on your Hobie® 20.
    H-20 & GETAWAY SWIVEL TRAVEL CAM PLATE
    Hobie
    Out of Stock
    H18 Traveler Car Sub Assembly Murrays Part# 50-61842000 Hobie® factory replacement car body subassembly for Hobie® 18 main traveler.
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 TRAVELER CAR SUB ASSEMBLY
    Hobie
    H18 Traveler Bushing Shaft Murrays Part# 50-61830000 This is a component of an H18 Traveler car. This will fit original Hobie 18 main traveler cars or the new cars that we are producing.  Hobie Part# 61830000
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 TRAVELER BUSHING SHAFT
    Murrays Sports
    Out of Stock
    H18SX/21 Trampoline Wing Set-Black Murrays Part# 50-68040255 Hobie® factory replacement black mesh tramps. Lacing line is not included; order 32 feet of 3/16" line #39-1410BK per side.
    H-18SX/21 TRAMPOLINE WING SET-BLACK
    Hobie
    Out of Stock
    Wave 1Piece Classic Trampoline-White Murrays Part# 50-38970000 Hobie factory solid white vinyl tramp is heat welded for longevity. This one-piece tramp fits Hobie® Wave Classic SE (not Wave Club). Which Wave model do you have? Standard Wave/Classic or SE is car toppable and has a one-piece trampoline. Shrouds and bridles connect with hooks. Club Wave has a three-piece trampoline and the shrouds and bridles connect with clevis pins.
    WAVE 1 PIECE CLASSIC TRAMPOLINE-WHITE
    Hobie
    Out of Stock
    VENTURE-15 MESH TRAMPOLINE
    Murrays Sports
    Out of Stock
    H-17 TRAMPOLINE TRACK
    Hobie
    Out of Stock
    NACRA PRINDLE TRAMPOLINE TRACK 84"
    Murrays Sports
    Out of Stock
    TRAC 14 MESH 1-PIECE BIAS CUT TRAMPOLINE
    Murrays Sports
    Out of Stock
    OLD STYLE SUPER CAT-17 MESH TRAMPOLINE
    Murrays Sports
    Out of Stock
    TRAC 16 MESH 1-PIECE BIAS CUT TRAMPOLINE
    Murrays Sports
    Out of Stock
    NEW STYLE SUPER CAT 17 TRAMPOLINE
    Murrays Sports
    Out of Stock
    SOL-15 TRAMPOLINE 72" OR 78"
    Murrays Sports
    Recently viewed