Murrays Marine - Catamaran specialists

All Sailing Parts

3138 products

    Murrays Sports is your best one stop shop for beach catamaran parts and accessories.  We stock both OEM and aftermarket parts for Hobie Cat Catamarans, Nacra Catamarans, and Prindle Catamarans.  We also have parts for Dart, Sol-Cat, G-Cat, Sabot and O'Pen Skiff Sailboats.

    We manufacture many OEM parts for these boats and have a full rigging shop onsite.  We make most of our rigging orders and ship within 24 hours of being ordered.

    Murrays has kits to make your life easier. From Rigging sets, Line Sets, Rudder locking kits, Rudder cam kits, Mast hinge kits, spare parts kits, rudder rebuild kits, cat righting kits, pins and rings kits and more.

    We manufacture many hard to find parts and source parts as needed when the OEM manufacturers discontinue items.

    Murrays has the largest selection of tiller extensions available with aluminum, fiberglass and carbon version s available in fixed length and adjustable length hiking sticks.

    We make 3 generations of Hobie 16 rigging and can help you get what you need for your boat.

    Custom rigging - Murrays can handle custom rigging requests from 3/32, 5/32 and 1/8" wire.  We use top quality 316 stainless wire for the best longevity.  We use professional grade tools and have experienced craftsmen with years of experience handling the rigging.

    Email us lengths, wire type and end pieces for a custom rigging quote.  Send quote requests to info(at)murrays.com.  Use the @ symbol in our email address instead of (at).  If we post the address we get even more spam.

    We offer expert parts advice and can help with any size project from restoring a classic boat to maintaining a fleet of boats.

    We carry a full line of parts from Hobie, Harken, Nacra, Ronstan, Robline, Alpha Rope, Pelican Rope, and Rooster.

    Navigating Murrays.com: The 2 best ways to find the parts you need are to use the Search and the Shop By Boat section.

    The Search is at the top of the page and is for searching key words like Fairlead, 40mm block, cheek block, clew block, downhaul, Nacra Bridle etc. 

    The Shop By Boat section can be found in the dropdown menu. Click on the Pars by Boat menue header and then select your boat under the manufacturer.  Once on your boat you can shop by category: Mast Parts, Rigging, Boom Parts, Front Crossbar Parts, Rudder Parts, Upgrades and Accessories.

    We have hyperlinked Illustrated parts lists for the Hobie 16 and the Hobie Wave on their shop by boat pages.

     

     

    3138 products
    SAIL NUMBER 14" U-CUT BLACK
    Murrays Sports
    $22.00
    T-NUT CHANNEL INSERT 8mm BRASS
    Misc
    $4.00
    Thimble 1/16-3/32 Stainless Steel

Ronstan's #481 thimble is used on Hobie 18 jib halyard, shrouds, forestays and trapeze wires. Constructed of grade 304 stainless steel. Weight: .1 oz.
    RONSTAN STAINLESS THIMBLE FOR 2.5MM (3/32") WIRE
    Ronstan
    $1.27
    SOL-18 MAIN HALYARD W/SHACKLE

Main halyard for a 18' Sol Cat catamaran.
    SOL-18 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    $120.00
    Screw RHMS #10-32 X 7/8 Stainless Steel
Murrays Part# 19-3500
Stainless steel, round head #10-32 x 7/8" machine screw. Measurements are diameter and threads per inch times grip length.
    SCREW RHMS #10-32 X 7/8 (SS)
    Misc
    $0.40
    Screw RHMS #10-24 X 7/8
Stainless Steel Phillips Head
Murrays Part# 19-3510
Stainless steel, Phillips round head #10-24 x 7/8" machine screw
    SCREW RHMS #10-24 X 7/8" SS
    Misc
    $0.36
    Screw PHSMS #8 X 1.50" (Stainless Steel)

Murrays Part# 19-1623



Stainless steel, pan head, self-tapping, #8 x 1.5" sheet metal screw
    SCREW PHSMS #8 X 1.50" (SS)
    Misc
    $0.35
    Screw RHMS #10-24 X 1-1/8" Stainless Steel

Murrays Part# 19-3012

Stainless steel, Phillips round head #10-24 x 1-1/8" machine screw
    SCREW RHMS #10-24 X 1-1/8 (SS)
    Misc
    $0.88
    Round Head Machine Screw #10-24 X 1 Stainless Steel Phillips Head
    SCREW RHMS #10-24 X 1" (SS)
    Misc
    $0.42
    Screw PHMS #10-32 X 7/8"
Stainless Steel

Murrays Part# 19-2916

Stainless steel #10-32 x 7/8" machine screw has pan head with slot
    SCREW PHMS #10-32 X 7/8" (SS)
    Misc
    $0.35
    Screw PHMS #10-32 X 2"
Stainless Steel

Murrays Part# 19-2918

Stainless steel, #10-32 x 2" Phillips pan head machine screw. Mainsheet block replacement screw. Also used to mount Harken Cam-Matic cleats #28-0150 and #28-0365 (needs 2 screws).
    SCREW PHMS #10-32 X 2" (SS)
    Misc
    $0.55
    Screw Phillips Head Montel Steel
#10-24 X 1.50
Murrays Part# 19-3011
Stainless steel, Phillips pan head #10-24 x 1-1/2" machine screw.
    SCREW PHILLIPS HEAD #10-24 X 1.50 (SS)
    Misc
    $0.60
    Screw OHSMS #10 X 3/4"
Stainless Steel

Murrays Part# 19-3225



Stainless steel #10 x 3/4" oval Phillips head, self-tapping sheet metal screw.
    SCREW OHSMS #10 X 3/4" (SS)
    Misc
    $0.36
    Screw FHSMS #12 X 3/4 Stainless Steel
Murrays Part# 19-1625
Flat head, self-tapping, stainless steel #13 x 3/4" sheet metal screw.
    SCREW FHSMS #12 X 3/4" (SS)
    Misc
    $0.40
    Screw FHSMS #10 X 1.50 Stainless Steel
Murrays Part# 19-1626
Flat head, self-tapping, #10 x 1.50" stainless steel sheet metal screw.
    SCREW FHSMS #10 X 1.50" (SS)
    Misc
    $0.50
    FHMS #6-32 X 1/2 (Brass)

Murrays Part# 19-1510
Flat head #6-32 x 1/2" brass machine screw fits Pocket Protector kits #01-1001 and #01-1002.
    SCREW FHMS #6-32 X 1/2" (BRASS)
    Misc
    $0.14
    Ronstan Swiveling Cleat Unit, 28mm Ball Bearing Sheaves

Murrays Part# 21-0005



Swivel cleat bases permit easy cleating and releasing from any angle. Sheave can be relocated to allow the control line to feed from below. Fiber-reinforced nylon body. Comes complete with a 28mm (1-1/4") ball bearing sheave, small T-Cleat and the Fast Track fairlead.

Typically fitted to dinghy and catamaran spars for halyard, cunningham or outhaul control.
    RONSTAN SWIVELING CLEAT UNIT, 28MM BALL BEARING SHEAVES
    Ronstan
    $72.36
    Ronstan Single Lead Block

Murrays Part# 21-2379

Lead blocks are a low profile solution for leading halyards or other rig sail controls back to cleats or jammers.

This Ronstan lead block features U.V.-stabilized Acetal sheave and grade 316 stainless steel load housing. Typically used in dinghy spars for control lines.
    RONSTAN SINGLE LEAD BLOCK
    Ronstan
    $15.25
    RONSTAN SERIES 30 BALL BEARING ORBIT BLOCK, BECKET AND SWIVEL SHACKLE
    Ronstan
    $23.50
    Ronstan Series 30 Ball Bearing Orbit Block, Lashing

Murrays Part# 21-35101



Ronstan ball bearing Orbit Blocks™ boast the highest strength-to-weight ratio available, achieved through all-composite reinforced polymer materials and multiple attachment options. Ultra low profile through-sheave becket. Use for jib clew block.
    RONSTAN SERIES 30 BALL BEARING ORBIT BLOCK, LASHING
    Ronstan
    $16.50
    Out of Stock
    REPLACEMENT DOUBLE BUTTON 3/8
    Misc
    $10.00
    PRINDLE 18.2 BRIDLE 5/32-BLACK
    Murrays Sports
    $60.00
    OXEN SPRING TRIP LEVER RETURN
    Oxen
    $2.00
    Oxen C Clip
005-0761-11
REBUILDING OXEN BLOCKS
Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. We regret that our technician is not available to answer rebuilding questions.
    OXEN BLOCK C CLIP
    Oxen
    $1.00
    Oxen Block Becket Seal Strap

Murrays Part# 005-0761-19
    OXEN BLOCK BECKET SEAL STRAP
    Oxen
    $0.50
    Oxen Block Becket Strap Kit

Murrays Part# 005-0766
    OXEN BLOCK BECKET STRAP KIT
    Oxen
    $65.00
    Out of Stock
    Oxen Block Becket Clevis Pin 3/16 X 1-1/4"

Length: 3/16 X 1-1/4
    OXEN BLOCK BECKET CLEVIS PIN
    Oxen
    $5.00
    Nut Hex MS #6-32 (Brass)
Murrays Part# 19-2010
Brass hex nut fits Pocket Protector kits #01-1001 and #01-1002. Measurements are diameter and threads per inch.
    HEX NUT #6-32 (BRASS)
    Misc
    $0.15
    Nacra Inter 17 Shroud Roller Swaged
Murrays Part# 002-5204-12
Because the manufacturer's specifications vary, a pull-to-pull length is required to ensure correct length for your boat.
    NACRA INTER 17 SHROUD 1/8" ROLLER SWAGED
    Murrays Sports
    $60.00
    N6.0 North American Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-4705-12

Single black shroud for Nacra 6.0NA (North American) is hydraulically swaged to be clean and strong. Constructed to factory specifications. Length: 24' 4" pull-to-pull.

To help differentiate between the standard Nacra 6.0 and Nacra 6.0 NA, please note that the standard Nacra 6.0 came stock with a shorter mast and without a bridle foil. The Nacra 6.0 NA came stock with a longer mast and included a bridle foil.
    N-6.0NA SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    $95.00
    N6.0 North American Diamond Wire Long

Murrays Part# 002-4794-20

Lower diamond wire with turnbuckle and roller for Nacra 6.0 NA (North American) is constructed to factory specifications.
    N-6.0NA DIAMOND WIRE LONG
    Murrays Sports
    $150.00
    N-6.0NA DIAMOND WIRE SHORT
    Murrays Sports
    $140.00
    N6.0 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-4605-12

Single black shroud for Nacra 6.0 is hydraulically swaged to be clean and strong. Constructed to factory specifications. Length: 22' 5-1/4" pull-to-pull.

To help differentiate between the standard Nacra 6.0 and Nacra 6.0 NA (North American), please note that the standard Nacra 6.0 came stock with a shorter mast and without a bridle foil. The Nacra 6.0 NA came stock with a longer mast and had a bridle foil.
    N-6.0 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    $99.00
    N-5.7 Forestay 5/32" Black Wire Roller Swaged

Murrays Part# 002-4445-12

Forestay for Nacra 5.7 is constructed to factory specifications from 5/32" black-coated wire with hydraulically swaged fittings.
    N-5.7 FORESTAY 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    $90.00
    Sale
    N5.5SL Diamond Wire with Turnbuckle

Murrays Part# 002-4394-20



Diamond wire with turnbuckle for Nacra 5.5SL is constructed to factory specifications.
    N-5.5SL DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    Sale price $125.00 Regular price $150.00 Save $25
    Sale
    N5.2 Diamond Wire with Turnbuckle

Murrays Part# 002-4294-20



Diamond wire with turnbuckle for Nacra 5.2 is constructed to factory specifications.
    N-5.2 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    Sale price $125.00 Regular price $150.00 Save $25
    Inter 20 Roller Furling Forestay 5/32" Black Wire

Murrays Part# 002-5445-32

Forestay for Inter 20 with roller furling jib is constructed of 5/32" black-coated wire to factory specifications.
    INTER 20 ROLLER FURLING FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    $115.00
    Inter 20 Jib Halyard Wire

Murrays Part# 002-5483-80

Jib halyard wire for Inter 20 is constructed to factory specifications.
    INTER 20 JIB HALYARD WIRE
    Murrays Sports
    $120.00
    Nacra Inter 18 Double Trapeze (4 handles)


The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.

A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adjustment kit
Sailing Harness

​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140
    NACRA INTER 18 DOUBLE TRAPEZE BLACK WIRE (4)
    Murrays Sports
    $120.00
    Out of Stock
    WAVE/GETAWAY TILLER CONNECTION KIT
    Hobie
    $136.99
    Recently viewed