Murrays Marine - Catamaran specialists

All

3148 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3148 products
    Inter 20 Jib Halyard Wire Murrays Part# 002-5483-80 Jib halyard wire for Inter 20 is constructed to factory specifications.
    INTER 20 JIB HALYARD WIRE
    Murrays Sports
    Inter 18 Diamond Wire without Turnbuckle Murrays Part# 002-5394-20 Diamond wire without turnbuckle for Inter 18 is constructed to factory specifications. Includes both sides.
    NACRA INTER 18 DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    Out of Stock
    WAVE/GETAWAY TILLER CONNECTION KIT
    Hobie
    Harken 22mm Endstops - Low Beam Murrays Part# 28-0173 Pair of end stops to fit Harken #2720 traveler track. Use 5mm or #10FH fasteners. Approximately 7/8". For new style low profile tracks. Sold in Pairs
    HARKEN 22MM ENDSTOP- LOW BEAM
    Harken
    Harken Triple Micro Block Murrays Part# 28-0228 Harken 22mm ball bearing micro triple block with stainless side plates. Specifications: 1/4" maximum line capacity 500 lb. SWL 1200 lb. breaking strength 7/8" sheave 2" long Harken Part# 228 Hobie part# H228 
    HARKEN TRIPLE MICRO BLOCK
    Harken
    Harken 29mm Bullet Block - Swivel Murrays Part# 28-0166 Medium-size Harken double bullet block with swivel has Delrin ball bearings. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.
    HARKEN 29MM BULLET BLOCK-SWIVEL
    Harken
    Harken 29mm Bullet Block-Swivel, Becket Murrays Part# 28-0167 Medium-size Harken single bullet block with swivel and becket has Delrin ball bearings. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.
    HARKEN 29MM BULLET BLOCK-SWIVEL, BECKET
    Harken
    Harken 40mm Ratchet Block-Swivel Murrays Part# 28-2608 This small ratchet with on/off switch is ideal for jib sheets and spinnakers on small dinghies where size and weight are critical. Eight-faceted machined aluminum sheave holds line securely. Hard coat anodizing provides durability.
    HARKEN 40MM RATCHET BLOCK-SWIVEL
    Harken
    Harken 38mm Big Bullet Block Murrays Part# 28-0125 Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications.
    HARKEN 38MM BIG BULLET BLOCK
    Harken
    Harken Block Double Micro Murrays Part# 28-0226 Harken ball bearing micro double block with stainless side plates. Low-friction Micro blocks are compact and lightweight, making them ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Specifications: 1/4" maximum line capacity 350 lb. SWL 1200 lb. breaking strength 2" long Harken Part# 226 Hobie Part# H226S
    HARKEN BLOCK DOUBLE MICRO
    Harken
    Harken 29mm Stand-up Block Murrays Part# 56-31297 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.  Specifications: 330 lb. SWL 1000 lb. breaking strength 5/16" maximum line diameter 1-1/8" sheave diameter 2-3/16" long Harken Part #349 Nacra Part# 31297
    HARKEN CARBO STANDUP FIXED 29MM
    Harken
    Harken 57mm Triple Ratchamatic Block-Swivel, Cam Cleat Murrays Part# 28-2629 The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase. Shifting between ratchet and light air modes is seamless. Unloaded the sheet runs freely during mark roundings and jibes. Ratchet engagement may be adjusted to a higher or lower load according to strength and sailing style.
    Harken Hobie 16 main sheet base block
    HARKEN 57MM TRIPLE RATCHAMATIC BLOCK-SWIVEL, CAM CLEAT
    Harken
    Harken 57mm Single Carbo Ratchamatic Block Murrays Part# 28-2625 Under low loads, this lightweight, high strength Harken 2-1/4" ratchet block rolls freely in both directions like a non-ratcheting block, but automatically engages the ratchet mechanism as loads increase, giving sailors an additional holding power of 10:1. Specifications: 500 lb. SWL 2000 lb. breaking strength 3/8" maximum line diameter 2-1/4" sheave diameter 4-1/16" long Weighs 3.7 oz. 3/16" shackle pin diameter Harken Part# 2625
    HARKEN 57mm SINGLE CARBO RATCHAMATIC BLOCK
    Harken
    Harken 29mm Double Block - Swivel Murrays Part# 28-0342 This compact double block is extremely strong and features a U-Lock to hold the swivel in front/side position, or to let it spin freely. Use this miniature Carbo as a mainsheet block on small dinghies such as the Optimist, to increase downhaul, or for low-friction control blocks on any size boat.
    HARKEN 29mm DOUBLE BLOCK-SWIVEL
    Harken
    Harken Ball Bearing Delrin 1/8" Murrays Part#  28-HSB243 Harken 1/8" replacement Delrin ball bearings are sold individually.
    HARKEN BALL BEARING DELRIN 1/8" (EACH)
    Harken
    Harken 16mm Block-Becket Murrays Part# 28-0405 The Harken air block offers a very high load in an extremely lightweight block. Excellent for control lines. The overall length is only 1-1/2" long. The 5/8" sheave will accept line as large as 7/32". 250 lb. SWL; 1200 lb. breaking strength.  The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb.
    HARKEN 16MM BLOCK-BECKET
    Harken
    H21 Special Edition Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-0505-12 Single shroud (sidestay) for Hobie® 21 Special Edition has hydraulically swaged fittings for a cleaner, stronger shroud. It is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Note: The H21SE is differentiated by its 10' beam and lack of a front trampoline.
    H-21SE SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    H17 Shroud 5/32 Roller Swedge Murrays Part# 002-0305-12 This is our strongest Shroud for the Hobie 17.  If you have a Hobie 17 Sport or Hobie 17 Super kit or other setup that has a jib on the front, you need these. Heavy duty 5/32" single black shroud (sidestay) for Hobie 17 or Hobie 17 Sport is hydraulically swaged with a thimble and marine eye for a cleaner, stronger shroud.
    H-17 SHROUD 5/32" WIRE ROLLER SWAGED
    Murrays Sports
    Out of Stock
    H-17 BRIDLE CROSSBAR ASSEMBLY
    Murrays Sports
    SERIES 19 JIB SHEET & TRAVELER UPGRADE
    Murrays Sports
    Folding Anchor Kit Murrays Part# 001-6051 The convenient 7"x17" zippered pouch holds a 3.5-lb. folding anchor with chain and 50 feet of polypropylene line. Clip the pouch in a convenient location or stow the kit in an access port.
    FOLDING ANCHOR KIT
    Murrays Sports
    FIDDLE BLOCK W/SWIVEL Use this economical medium fiddle block with cleat and becket for 4:1 righting aids. 3/16 to 3/8" line capacity.
    FIDDLE BLOCK WITH SWIVEL
    Misc
    Fiberglass Stain Remover Murrays Part# 007-0790 This stain-absorbing gel removes oil, rust and stains, road soil on your boat or other fiberglass surfaces. Simply apply, wait a few minutes, then wipe off. Fiberglass Stain Remover is non-abrasive and requires no sanding or compounding. It also removes rust stains from cloth. 16 oz.
    FIBERGLASS STAIN REMOVER
    Davis
    Clamcleat Racing Midi Aluminum Murrays Part# 27-0254 Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 5/32"-5/16". 2 1/8" hole spacing.
    CLAMCLEAT RACING MIDI ALUMINUM
    Clamcleat
    Clamcleat Midi (Nylon) Murrays Part# 27-0209 Replace old, worn-out outhaul and downhaul Clamcleats®. Nylon cleats have less wear resistance than aluminum, but are less expensive. Easy to mount. Line capacity is 3/16"-5/16". 2 1/8" hole spacing.
    CLAMCLEAT MIDI (NYLON)
    Clamcleat
    Clamcleat Handle For Trapeze Cleat Murrays Part# 27-0834 The 27-0834 handle is designed for a perfect fit on the Clamcleat® silver CL253 (#27-0253) and CL253AN hard-anodized (#27-0253A) trapeze cleats. Developed in conjunction with the racing specialists at Shock Sailing, the handle is light weight, the perfect size and very comfortable to use.
    CLAMCLEAT HANDLE FOR TRAPEZE CLEAT
    Clamcleat
    Chinook Base Cup with Double Button Murrays Part# 003-0281 American standard heavy duty plastic base cup with 3/8" double push button has brass insert and cover which prevents sand from jamming parts.
    CHINOOK BASE CUP WITH DOUBLE BUTTON
    Chinook
    Out of Stock
    Carbon Key Hole Buckle Murrays Part# 001-0311 The safety-minded Carbon Key-Hole buckle system offers many advantages over the traditional hook design. Its low profile design is less likely to get hooked unintentionally and the system will stay hooked until purposefully removed. A low profile means much easier reboarding and less likelihood of scratching gel coat, point loading or damaging a hull. Ball-end trapeze rings are lighter and less dangerous than stainless dogbones or trapeze rings.
    CARBON KEY HOLE BUCKLE
    Murrays Sports
    Bolt Hex Head 5/16-18 X 3" (Stainless Steel) Murrays Part# 19-2232 Stainless steel hex head bolt measures 5/16-18 x 3"
    BOLT HEX HEAD 5/16-18 X 3" (SS)
    Misc
    Bolt Hex Head 1/2-13 X 3.75 (Stainless Steel) Murrays Part# 19-2240 Stainless steel hex head bolt for older Hobie® 16 pylon. Compare to Hobie® Part#50-8040731
    BOLT HEX HEAD 1/2-13 X 3.75" (SS)
    Misc
    H14 Angled Luff Caps Murrays Part# 012-2006 No more battens poking through next to the mast. Tren Tec angled luff caps for Hobie® 14 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Part# 1561 Sold in packages of 6
    H-14 ANGLED LUFF CAPS (6)
    Tren-Tec
    LEECH CAP: 1" FOAM MAIN EACH Glue this end cap onto any solid epoxy or foam batten. Batten may need to be modified slightly to ensure a good fit. Measure your batten and select a Perfect Pocket cap size accordingly. TrenTec part number FB-10
    FOAM MAIN SAIL BATTEN CAP 1"
    Tren-Tec
    Base Pad Universal U-drill  Murrays Part# 001-8014 This "potato chip" (2" OD) pad fits or can be modified to fit almost any main beam or mast extrusion for use with Harken micro cleats with fairleads or Ronstan small cleats with fairleads. To modify, put sandpaper on beam and rub base pad to suit and/or fill gap with silicone sealant and allow to dry before securing. Fasteners are not included.
    BASE PAD UNIVERSAL U-DRILL
    Murrays Sports
    3-Hole Adapter Pad Murrays Part# 001-0109 Our 3-hole adapter pad fits a Hobie® or Prindle elliptical crossbar. Polyurethane bases provide flat mounting surfaces for mast rotation control cleats, barberhauler cleats, or Hobie® 16 jib trim cleats. Use to mount small Ronstan C-Cleat (#21-5000) or Ronstan Small or Large Swivel 360 Cleats (#21-0067 or #21-0058). Each base can be port or starboard, depending on how cleats are installed.
    3-HOLE ADAPTER PAD
    Murrays Sports
    WELDED STAINLESS STEEL RING 3/16"x3/4"
    Misc
    Out of Stock
    Hobie Tiger Jib
    Murrays Sports
    EYE STRAP KIT - 2072
    Murrays Sports
    Out of Stock
    Getaway Forestay Assembly
    Murrays Sports
    SSR Light Racing Sheet 8mm Green
    Murrays Sports
    Sale
    Eleveight RS V6 14m Kite
    Murrays Sports
    Save $824
    Recently viewed