All Prindle 18 Parts

123 products

    123 products
    Murrays Part# 001-7050 The gold standard for catamaran racing has been the Coffee Marine Bridle Fly or the Hobie STD bridle vane that was designed based on it. The red plastic vane is very sensitive to wind shifts and easily mounts to the front of a Hobie 16, 14, Wave and all the Prindle Catamarans. With an adapter it can be mounted to any of the Hobiecat sailboats that use a furling drum. To start out, we are offering the standard length which extends about 13" and Hobie part number 7703
    COFFEE MARINE BRIDLE VANE
    Murrays Sports
    Dolphin Mast Support Pad Murrays Part# 56-2505 Dolphin striker mast support pad fits all Prindle's, Nacra's and Inters. This dolphin striker mast support is also known as a dolphin striker casting. It sits between the dolphin post rod and the dolphin striker rod. Nacra Sailing factory item# 30063.
    PRINDLE/NACRA/INTER DOLPHIN MAST SUPPORT PAD
    NACRA
    Rudder Locking Bolt Murrays Part# 56-4017 The Prindle Rudder Locking Bolt is the factory replacement bolt for rudder locking system on all Prindles. Tip: Be sure to check for proper alignment of the lock bolt to spring bolt. Any bent component will prevent the system from working properly. Identify and replace the bent portion to get your rudder system functioning properly. Performance Sports factory item# 4017
    PRINDLE RUDDER LOCKING BOLT
    NACRA
    P18 Bridle 5/32" Black Murrays Part# 002-2315-02 One black bridle for Prindle 18 is constructed to factory specifications.
    PRINDLE 18 BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    Snap Shackle With Tack 1/4" Murrays Part# 22-4501 Swiveling tack shackle with 1/4" clevis pin. Use on hexaratchets on Hobie® 18, Nacra or Prindle. To connect the swivel shackle to an item that requires a 3/16" clevis pin, you will need a 3/16" clevis pin with 7/8" shaft. Also convenient for the jib tack connection on Nacras and Inters.
    SNAP SHACKLE WITH TACK 1/4"
    Murrays Sports
    1/4" QUICK RELEASE BOW SHACKLE
    Murrays Sports
    Rudder Pin Nacra, Prindle and H21 Stainless Steel Murrays Part# 001-5273 Long-wearing, weight-saving, hollow stainless rudder pins with strong, .065" wall provide reduced wear and the best long-term fit. These rudder pins measure 3/8" x 10-1/4" end-to-end with a hole at each end. They will fit Nacra, Prindle and Hobie® 21. Cotter pins are included. These pins are a replacement for Hobie® factory item #40880011 (sold individually). Sold in pairs
    NACRA/PRINDLE AND H21 SS RUDDER PIN
    Murrays Sports
    PRINDLE JIB HALYARD WITH SISTER CLIPS
    Murrays Sports
    Prindle 18 Mast Head Casting Murrays Part# 56-6802 Mast head casting for Prindle 18 only. Order pin and split ring separately. Nacra Sailing factory item# 30452
    PRINDLE 18 MAST HEAD CASTING
    NACRA
    Left Rear Crossbar End Cap Murrays Part# 56-3903 The Prindle Left Rear Crossbar End Cap is for the Prindle 19 and 18-2 cats Performance Sports factory item# 3903
    PRINDLE LEFT REAR CROSSBAR END CAP
    NACRA
    Front Crossbar End Cap Murrays Part# 56-2902 The Prindle Front Crossbar End Cap is for the front crossbar of all Prindles fits both right and left sides. Please specify silver or black and we will do our best to accommodate your selection Nacra Sailing factory item# 30394
    PRINDLE FRONT CROSSBAR END CAP
    NACRA
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2" WITH LANYARD
    Misc
    Rudder Pin Nacra, Prindle and H21 (Aluminum) Murrays Part# 001-5272 Aluminum rudder pins for Nacra, Prindle and Hobie® 21 measure 3/8" x 10-1/4" end-to-end, with hole at each end. Cotter pins are included. Sold in pairs
    NACRA/PRINDLE AND H21 ALUMINIUM RUDDER PIN
    Murrays Sports
    Spreader Bar Screw (Fine Threads) Murrays Part# 56-9851 Black, fine-threaded screw (20/inch) fits newer Nacra cats, but may require fine-threaded forward spreader bar (#56-9844) and aft spreader bar (#56-9843) to ensure compatibility with older Nacras and Prindle 18, 18.2 and 19. Nacra Sailing factory item# 30337
    NACRA SPREADER BAR SCREW (FINE THREADS)
    NACRA
    PRINDLE DYNEEMA RACE TRAMP LINE KIT
    Murrays Sports
    Mast Bearing Half Round Murrays Part# 56-2007 Half-round mast bearing for all Prindle mast steps. Nacra Sailing factory item# 30964
    PRINDLE MAST BEARING HALF ROUND
    NACRA
    Front Boom End Cap Murrays Part# 56-7902 Front boom end cap for Nacra and Prindle cats. Nacra Sailing factory item# 30204
    NACRA/PRINDLE FRONT BOOM END CAP
    NACRA
    Rear Boom End Cap Murrays Part# 56-7903 Rectangular rear boom end cap casting for Nacra 5.2 and all Prindles. Nacra Sailing factory item# 30205
    NACRA/PRINDLE REAR BOOM END CAP
    NACRA
    Out of Stock
    PRINDLE RUDDER REBUILD KIT
    Murrays Sports
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    Prindle 16, P18 Jib Block Wire Murrays Part# 002-2224-00 Jib block wire for Prindle 16 or 18 is constructed to factory specifications. A swaging tool is needed for installation.
    PRINDLE 16/18 JIB BLOCK WIRE
    Murrays Sports
    Rudder Pull Up/Down Kit Prindle Murrays Part# 001-1180 Replacement handles and ropes to pull your rudders up and down on all Prindle models.
    PRINDLE RUDDER PULL UP/ DOWN KIT
    Murrays Sports
    Mast Base Hinge Plate Murrays Part# 56-6816 Mast base hinge plate for Prindle 18, 18-2 and 19 Performance Sports factory item# 6816
    PRINDLE MAST BASE HINGE PLATE
    NACRA
    Prindle Shroud Anchor Bar Murrays Part# 56-1014 Shroud anchor bar for Prindle 15, 16 or 18 Performance Sports factory item# 1014
    PRINDLE SHROUD ANCHOR BAR
    NACRA
    GOOSENECK 'U' BRACKET Murrays Part# 56-7810 Prindle Gooseneck 'U' Bracket Gooseneck "U" bracket fits Nacra 5.2 and all Prindles. Nacra Sailing factory item# 30980
    PRINDLE/NACRA GOOSENECK 'U' BRACKET
    NACRA
    Out of Stock
    PRINDLE TILLER CROSSBAR END CASTING
    Murrays Sports
    Boom Outhaul Car Murrays Part# 56-7907 Internal boom outhaul car for all Prindles, Nacra 5.2 and Inters. Nacra Sailing factory item# 30206
    PRINDLE/NACRA/INTER BOOM OUTHAUL CAR
    NACRA
    Hobie Shroud Adjuster Covers 11″ Pair are vinyl covers that protect the crew from metal shroud adjusters and can prevent de-masting by protecting the split rings. Includes two adjuster covers, one for each side of the boat. Available in white and black. Compatible with al beach cats: Nacra, Prindle, A-Cat, Dart, Sol Cat, G-Cat...
    11" SHROUD ADJUSTER COVERS
    Hobie
    Gooseneck Box Fitting Murrays Part# 56-7808 Prindle Gooseneck box fitting, part of the boom to mast connection assembly to on Nacra 5.2s and all Prindles. Nacra Sailing Factory item# 30203
    NACRA GOOSENECK BOX FITTING
    NACRA
    Half Round Load Spreader Murrays Part# 56-4019 This component is installed into the head of the rudder blade to anchor the rudder locking pin. The Prindle Half Round Load Spreader is for rudder system on all Prindles. Prindle Part# 4019 Nacra sailing factory item# 30973
    PRINDLE HALF ROUND LOAD SPREADER
    NACRA
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Tiller Rudder Stiffening Kit: Prindle Murrays Part# 001-5141 Spring-loaded tiller connection with contoured spacers tightens the hinge connection on Prindles. Six plastic shims reduce slop between rudders and castings
    PRINDLE TILLER AND RUDDER STIFFENING KIT
    Murrays Sports
    Batten Caps Leech Adjustable P18 Murrays Part# 012-7003 No more knots at the trailing edge. Adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes pre-cut line. Sold in a package of 10
    PRINDLE 18 ADJUSTABLE BATTEN LEECH CAPS
    Tren-Tec
    Mast Step Hinge Murrays Part# 56-6815 Designed and built to meet or exceed original OEM.  ​Mast step hinge for all Prindles. Use two #56-F128 mast step hinge pins. Nacra Sailing factory item# 30455
    PRINDLE MAST STEP HINGE
    Murrays Sports
    Batten Caps Leech Adjustable Prindle 16 Murrays Part#012-6003 No more knots at the trailing edge. These leech batten caps adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes 9 batten caps for Prindle 16 and pre-cut line. Tren Tec adjustable batten caps for Prindle catamaran mainsails. Leech caps are used on the trailing edge of the sail. Sold in packages of 9, includes batten tie lines.
    PRINDLE 16 ADJUSTABLE BATTEN LEECH CAPS (9)
    Tren-Tec
    ELONGATED TRAPEZE RING Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Misc
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK WITH REMOVABLE SHEAVE
    Murrays Sports
    The Tramp Line Kit: When lacing your trampoline, line offers a longer-lasting option over shock cord and is the better choice for sailors who prefer a very tight tramp. As the line stretches slightly over time, sailors can re-tension the tramp lacing to their liking. The line in this kit is black, abrasion-resistant, 8-strand low stretch. #001-2246 for Prindle 15, 16, 18 or Escape includes two 1/8" x 11' lengths and one 3/16" x 22'. #001-2248 for Prindle 18.2 or 19 includes two 19-foot lengths of
    PRINDLE TRAMP LINE KIT
    Murrays Sports
    Rudder Gudgeon Murrays Part# 56-1016 Rudder gudgeon for Prindle 15, 16 and 18 Nacra Sailing factory item# 30993
    NACRA RUDDER GUDGEON
    NACRA
    Shroud Stay Adjuster 7 Hole Murrays Part# 25-3310 Stainless steel shroud adjuster with seven 1/4" holes. ​Use #22-9802 clevis pin at top and #22-9808 at bottom. Fits: H14/16/18/20, Wave and Getaway. Compare to Hobie Part# 20830010
    SHROUD STAY ADJUSTER 7-HOLE
    Murrays Sports
    Recently viewed