Kiteboarding helmet, repair, impact vests, boards

All Kiteboarding Parts

188 products

    Kiteboarding Helmets, Harnesses, Vests, Repair, Footstraps and more.  Dakine, Mystic, Duotone, F-One, Eleveight, and more.  Kiteboarding Kites, Kiteboards, Helmets, Impact Vests, Harnesses and Repair Kits.

    188 products
    Sale
    Mystic Rash Glove - Short Finger The Mystic Rash Glove is a lightweight water glove that is ideal for kiting, paddling, winging and other light duty use. UV blocking flexible back with a reinforced palm makes it great for protecting both sides of your hand. Features Amara palm Velcro wrist strap Materials Nylon (80%) Spandex (20%)
    MYSTIC RASH GLOVES
    Mystic
    Save $7.99
    Titanium Hydrofoil Track Lock Universal Track Nut Murrays part# 55-0030T The Only Titanium Universal Track Nut! These track nuts lock into position with a set screw, setting them apart from other track nuts on the market. They were designed to be used with any foil board track and are made from 100% GR5 Titanium so corrosion will never be an issue. They are designed to work with any foil system whether it uses m6 or m8 hardware. The Track Lock Universal track Nut comes with both M6 and M8 threaded screw
    TITANIUM HYDROFOIL TRACK LOCK UNIVERSAL TRACK NUT (4)
    Misc
    Out of Stock
    The Dakine Nitrous Shorts Harness also known as the Dakine Nitrous Shorts are Dakine's most minimalist seat harness draped in board shorts. The Nitrous Shorts offer a very low spreader hook height and unhindered range of motion. The Nitrous shorts are one of Dakine’s lightest and most compact harnesses, they offer great freedom of movement with minimal padding that is only located where needed. Nitrous shorts are ideal for people with short arms, back pain, from foiling to kitesurfing.
    DAKINE NITROUS SHORTS HARNESS
    Dakine
    Save $50
    TEF-GEL HYDROFOIL HARDWARE LUBRICANT
    Misc
    Overhead Surf-Cap-Safety Retainer Murrays Part# 54-4413 The Hat Leash is finally here!  New from Overhead Surf is the Cap-Safe Retainer lanyard. Simply attached to your hat or cap and ensures that if it does get blown off your head, it stays with you.  Total hat saver!!  Now featuring a breakaway snap on the leash so it wont try to rip your head off if the hat gets caught on something. Features: Break away snap connection Hook/Loop for hat connection
    SURF HAT SAFETY RETAINER
    Misc
    Sale
    Mystic Safety Knife Murrays part# 57-1637092 The Mystic Safety Knife is a hook knife used for cutting kite lines or harness webbing in an emergency situation. It comes with a pocket that can be easily mounted to a harness for easy access and quick deployment.
    MYSTIC SAFETY KNIFE
    Mystic
    Save $3.99
    Murrays M8 x 25mm Titanium Hydrofoil Screws
    M8x25mm TITANIUM TORX BOLT
    Murrays Sports
    M6 T-Nuts: Stainless Steal Hydrofoil Mast Track Inserts slides foil
    STAINLESS STEEL M6 T-NUT
    Misc
    Rope Splicing Fid Kit Murrays Part# 001-1400 The Murrays Rope Splicing Fid Kit includes 9 fids from 1.7 to 5mm that can splice 1 - 6 mm diameter lines. It includes everything you need for small boat use. It can make tapered sheeting lines, split lines, halyards, looped ends, soft shackles, you name it. The kit includes everything you need to cut, splice and finish the job all contained in a water tight box for easy storage.
    ROPE SPLICING FID KIT
    Murrays Sports
    Sale
    Dakine Kite Compression Bag Murrays Part# 32-900675 Key Features for the Dakine Kite Compression Bag -Replaces heavier stock kite bags reducing overall travel bag weight -Shoulder carry strap for beach travel -Lightweight nylon fabric -Four compression webbing straps -Highly visibility location for writing kite size -210D Nylon -Fits up to 12m 3 strut kites, 10m 5 strut kites and 16m single strut kites. -Dimensions: 60 x 25 x 30cm
    DAKINE KITE COMPRESSION BAG
    Dakine
    Save $5
    F-One Foil Track Stopper
    F-ONE RUBBER FOIL TRACKER STOPPER-PAIR
    F-One
    Dynabar 11" HD Slider Assembly Murrays Part# 001-0226 If you are a diehard slider bar user the Dynabar HD Slider Assembly is a quick and easy way to extend the life of the spectra line on your Dynabar. The HD assembly features a thicker spectra line and 2 stainless steal shackles. By attaching the sliding line with shackles, the HD assembly prevents wear on your line where it goes thru the bar. The spectra is easy to replace and all the sliding functions of the bar remain unhindered.
    DYNABAR HD SLIDER ASSEMBLY
    Misc
    Sale
    Clash foam, NBR spine protection and kick-ass black solid and corduroy design. Being safe never looked so good. Designed, developed and approved by our very own Timo Kapl. This maximum protection wake impact vest is made for you to go nuts while gliding in style.
    MYSTIC TK IMPACT VEST
    Mystic
    Save $40.99
    Duotone Kite and Wing Pump Adapter Gasket Only
    DUOTONE KITE & WING PUMP ADAPTER GASKET
    Duotone
    Sale
    Forward Quick Dry Tee Forward Sailing Gear has been described as "sexy" by Sailing Anarchy. This is a quick dry short sleeve shirt with a great smooth feel to it and wears like a dream, for those warm days out on the water.
    FORWARD QUICK DRY TEE SHIRT
    Forward Wip
    Save $24.95
    ROBLINE SK78 1.8mm Kite Line was designed with kiters in Capetown South Africa to be the ultimate line for kiters boosting in high winds. The commitment level in Capetown is high and they ride large kites in high winds and then send it which loads the lines with multiple G-Forces. That is why they need to be able to trust that they have the strongest lines. The Dyneema® SK78 is super high strength and more durable than SK99, it has better chafe resistance properties
    ROBLINE SK78 1.8MM KITE LINE 30M SPOOL
    Robline
    Sale
    We've got you(r feet) covered with the Mystic Marshall Split-toe 3mm shoe. It offers you the same features as the Marshall boot, but with extra flexibility around the ankle. Change the tightness to your liking with the heel loop integrated ankle adjuster for optimal fit. The Marshall Split Toe Shoe offers a thin grippy soul that provides protection from rocks and blocks while still allowing you to feel what is underneath your feet.
    MYSTIC MARSHALL SPLIT TOE SHOE 3MM
    Mystic
    Save $9.99
    NEW, IMPROVED 4th GENERATION WMFG TALL KITEBOARD PUMP. Height: 24"/61cm (Extra Tall!) Diameter: 4"/10cm Capacity: 2.9L/Stroke As the originator of the big, tall, oversized, kiteboard pump WMFG is proud to introduce the third generation pump 4.0T! WMFG was the first "tall" kite pump on the market and has always been the most feature-rich, kite pump with the best selections of nozzle, the best hose available, and at the leading edge of pump tech. The new and improved extra big, tall, high volume 4.0T
    WMFG KITE PUMP 4L
    WMFG
    AIRTIME VALVE TRAP
    Airtime
    Out of Stock
    Dakine Foil Crush Footstrap
    DAKINE FOIL CRUSH FOOTSTRAP
    Dakine
    Sale
    DAKINE HAMMERHEAD KITEBAR 10"
    Dakine
    Save $25
    The Ding All Expoxy Quik Stick is a hand-kneadable, special epoxy putty that mixes in just one minute for permanent repairs to damp or wet areas. Dries white in 30 minute cure time. Perfect gear bag item.
    DING ALL EPOXY STIK
    Misc
    Sale
    FORWARD WIP PROTEC LONG JOHN
    Forward Wip
    Save $105
    Sale
    Dakine Foil Wing Cinch Cover Murrays Part# 32-344370 The Dakine foil wing cinch cover is a quick and easy padded cinch bag to protect your foil. Designed for light duty use in and out of the car and the garage. Comes in 2 sizes to fit most any foil with a simple draw string to close it up. Features: · Protects hydrofoil front wing, stabilizer wing, and fuselage · Quick and easy on/off cinch closure · 5mm foam padding · Full perimeter protection binding · Secure with side release buckle Sizing: M= Fit
    DAKINE FOIL WING CINCH COVER
    Dakine
    Save $22
    Sale
    MYSTIC WIND BARRIER SPRAY TOP
    Mystic
    Save $34.99
    Sale
    The Mystic Driver Seat Harness features a mid height back and is a bit lighter and more flexible than the Marshall. The Driver features an adjustable back panel to customize the fit. The Driver comes fully equipped with a Bananabar 2.0 but is compatible with the Click bar if you want to upgrade it or convert it to a sliding spreader bar.
    MYSTIC DRIVER SEAT HARNESS
    Mystic
    Save $30.99
    Sale
    The Mystic Foil Impact Vest is Mystic's top of the line vest with the most flexible neoprene and most durable padding. It provides impact protection and a little flotation, while being very low profile. The Mystic Foil Impact Vest has clash foam plates and sturdy NBR foam to protect your spine making it perfect for foilsurfing. You will wipe-out hard on your first couple of tries, believe us. It comes with top of the line M-Flex 2.0 neoprene lined with Knitflex on the outside and Flaremesh on the in
    MYSTIC FOIL IMPACT VEST-BLACK
    Mystic
    Save $40.99
    Sale
    This single-skin concept combines our passion for usability and security that will make your outdoor kite experience unforgettable. The best light wind handling and backstall resistance let you set off with ease. Be always prepared for emergencies due to its reliable depower and the B-Safe system. After its activation, you can also use the system for self-landing or take a relaxing break at any time. The pack size allows you to carry several kites in your backpack and react to sudden weather changes.
    FLYSURFER PEAK 5 FOIL KITE
    Flysurfer
    Save $170
    The Duotone Freeride Chickenloop Kit comprises of the smallest chicken loop combined with a short leash. This kit is the first choice for freeriders which are not unhooking. The short chicken loop maximizes the depower range, whilst the shorter safety leash is tangle-free.
    DUOTONE FREERIDE CHICKENLOOP
    Duotone
    Full size kite pump with smooth pumping action for quick easy kite inflation. 2 way pumping action with a switch to change it to one way. Compatible with most kites on the market, includes 6 inflation adapters.
    MYSTIC KITE PUMP EXTREME-BIG PUMP
    Mystic
    Mirazyme Odor Eliminator 2 oz Murrays Part# 38-1904 Great for cleaning odors out of wetsuits.
    MIRAZYME ODER ELIMINATOR
    Gear Aid
    Sale
    Forward XL Gust Evo Sunglasses
    Forward Gust Evo Sunglasses size chart
    FORWARD GUST EVO SUNGLASSES - XL
    Forward Wip
    Save $36
    Torx Tool L T30 Murrays Part# 001-7001 This is a basic Stainless steel Torx Tool, T30 is the size. Standard size for F-One foil hardware and a number of other foil screws using the M6 screws. This tool is small and fits in a pocket or spare bits pouch well.
    TORX TOOL L T30
    Misc
    Sale
    The Mystic Ambush Mid + Front Deck Pad is a front foot deck traction pad for kite surfboards and features their Gecko Grip texture for maximum grip with a low profile. It works on all type and sizes of boards. The 6 piece front foot deckpad has holes in the center to allow for footstraps if desired. The Ambush deck pad has 3m peel and stick adhesive in it for easy installation and a secure adhesion.
    MYSTIC AMBUSH MID AND FRONT DECK PAD-BLACK
    Mystic
    Save $10.99
    F-ONE TITAN MAST FOOT Murrays Part# 54-5110 The TITAN mast foot is the connecting part that makes the F-ONE aluminum masts compatible with all TITAN fuselages and wings. It is made of superior-grade aluminum 6061, CNC machined with high precision and fully anodized. To install the TITAN mast foot, it should be inserted into the bottom end of the aluminum mast and fastened with two M6x25mm tapered head screws.
    F-ONE TITAN MAST FOOT
    F-One
    The heavy duty 8mm Hydrofoil T-Nuts (Stainless Steel) are rectangular M8 channel inserts/T-Nuts. Designed for use in hydrofoil mast tracks.  Stainless steal inserts are an upgrade to the standard Brass inserts.  Great for salt water environments, they resist corrosion. Compatable with all Liquid Force, Lift, Slingshot, FoilMount (stainless only), etc track systems. Specs: M8 standard metric threads which is standard for all hydrofoil tracks. M8 t-nuts also work in windsurfing mast tracks as well
    STAINLESS STEEL M8 T-NUTS
    Misc
    GoPro Mount with Fastener for Gath Helmet Murrays Part# 52-2303 The GoPro Camera Mount gives you the convenience of easy, clip-on/clip-off camera mounting on a Gath helmet. The kit combines the GoPro camera base plate with a Gath customized, rust-proof helmet screw for an easy, do-it-yourself, convenient, top mounting to provide a secure, well-balanced helmet cam. All model GoPro cameras easily clip on or off.
    GOPRO HELMET MOUNT WITH FASTENER
    Gath
    Foilight Titanium Hammer Multi Tool
    MISC
    GATH GEDI/SFC BADGE
    Gath
    Out of Stock
    NSI Surface Mount Strap Inserts Murrays Part# 54-9064 Set of four footstrap insert plates with specially formulated 3M peel-and stick adhesive for use on surface of surfboards and kiteboards. Includes screws.
    NSI SURFACE MOUNT STRAP INSERTS (4)
    NSI
    Recently viewed