https://murrays.com/
daily
https://murrays.com/products/1-2-ball-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-0059.jpg?v=1733248320
NYLON 1/2" BALL
1/2 BALL (NYLON) - Hobie half round washer spacer tiller connector - Hobie part number 11510000 HOBIE HALF SPHERE TILLER CONNECTOR
https://murrays.com/products/10-hole-shroud-adjuster
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-hole-adjuster.jpg?v=1754407470
10 HOLE SHROUD ADJUSTER
10 Hole Hobie shroud adjuster
https://murrays.com/products/3-4-x-3-16-stainless-steel-ring
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-3525.jpg?v=1676949546
WELDED STAINLESS STEEL RING 3/16"x3/4"
https://murrays.com/products/4-access-port-with-lip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-1191wh_2.jpg?v=1685145110
4" PORT FLAT SCREW WITH LIP-WHITE
Port Flat 4" Screw with Lip White
Murrays Part# 001-1191WH
4" Access Port With Lip
Two piece screw-in 4" Access Port includes one deck ring and one lid. The deck ring is designed to install on a flat surface. The lip accommodates a Cat Bag (sold separately). This hatch is used on the flat locations on forward part of Nacra hull and has been used on Hobies and Prindles as well. Does not include hardware, hardware options shown in the related items section below.
Flat Access Ports
The
https://murrays.com/products/3-hole-pad-kit-hobie-and-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0110.jpg?v=1676949546
3-HOLE PAD KIT
3-Hole Pad Kit
Murrays Part# 001-0110
This base kit is for Harken®, Hobie® or Murray 360 cleats without swivel base adapters. Kit includes one 3-hole base, one swivel base adapter (#25-3001), plus three #10 FHSMS (#19-1626). Ronstan swivel 360 cleats include swivel base adapters, so this kit is not necessary. Fits Hobie® or Prindle elliptical crossbar.
https://murrays.com/products/29mm-harken-pivoting-block-with-carbo-cam
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0396.jpg?v=1676949547
HARKEN 29MM PIVOTING LEAD BLOCK-CARBO-CAM CLEAT
Harken 396 - 29mm Harken 180 Pivoting Block with Carbo-Cam, downhaul, Hobie.
https://murrays.com/products/40mm-harken-block-pivot-180-with-cam-matic
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2156.jpg?v=1676949549
HARKEN 40MM PIVOTING LEAD BLOCK- CAM-MATIC CLEAT
Harken 2156 40mm Pivot 180 Block with Cam
https://murrays.com/products/5-flat-access-port
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-1195wh.jpg?v=1685145260
5" PORT FLAT SCREW WITH LIP WHITE
Murrays Part# 001-1195WH
5" Flat Access Port
The 5" Flat Access Port is designed to install on a flat surface. Each hatch includes one deck ring and one lid. A lip accommodates a Cat Bag (sold separately). For Hobie® 20 and Tiger. This also fits the NACRA 15 and fits much like the VIKING access ports. Customers tend to prefer this style to the ports that became stock in 2018. Does not include hardware, hardware options shown in the related items section below.
Compare to NACRA part number 30365
Compare
https://murrays.com/products/6-cat-bag
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-4212_cat_bag_for_assess_port_7779c6c9-9c46-44a0-a0cf-9420b905af92.jpg?v=1715121383
6" CAT BAG (SCREW-IN)
The 6″ Cat Bag provides a handy storage pouch inside your access ports for snacks, drinks, tools and more. Designed to fit 6″ access ports that have a inner ring for them to sit on
https://murrays.com/products/6-access-port-with-lip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-4210wh-2-rotated.jpg?v=1715127268
6" ACCESS PORT WITH LIP
6" Access Port with Lip
Murrays Part# 001-4210WH
The 6" Access Port with Lip is standard on the Hobie 18 and newer Prindle cats and it is an excellent upgrade for older Prindles. Ports can be installed on any flat deck, including kayaks, where there is 8-1/2" of flat surface available. These ports come with the inner lip so they are compatible with the 6"cat bag. Does not include hardware, hardware options shown in the related items section below.
White port is Murrays #01-4210WH. Compare to Hobie Cat® #
https://murrays.com/products/adapter-pad-3-hole-hobie-prindle-elliptical
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0109.jpg?v=1676949553
3-HOLE ADAPTER PAD
3-Hole Adapter Pad
Murrays Part# 001-0109
Our 3-hole adapter pad fits a Hobie® or Prindle elliptical crossbar. Polyurethane bases provide flat mounting surfaces for mast rotation control cleats, barberhauler cleats, or Hobie® 16 jib trim cleats. Use to mount small Ronstan C-Cleat (#21-5000) or Ronstan Small or Large Swivel 360 Cleats (#21-0067 or #21-0058). Each base can be port or starboard, depending on how cleats are installed.
https://murrays.com/products/7-hole-shroud-stay-adjuster
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/25-3310.jpg?v=1719943240
SHROUD STAY ADJUSTER 7-HOLE
Shroud Stay Adjuster 7 Hole
Murrays Part# 25-3310
Stainless steel shroud adjuster with seven 1/4" holes.
Use #22-9802 clevis pin at top and #22-9808 at bottom.
Fits: H14/16/18/20, Wave and Getaway.
Compare to Hobie Part# 20830010
Nacra - Prindle part number 9893
https://murrays.com/products/telescoping-tiller-extension
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Aluminum_Adjustable_tiller_extension_for_Hobie_Nacra_and_Prindle_catamarans._Compare_to_Hobie_20550001_Hobie_hot_stick.png?v=1733166154
TELESCPOING TILLER EXTENSION 50"-95"
Aluminum Adjustable tiller extension for Hobie, Nacra and Prindle catamarans. Compare to Hobie 20550001 Hobie hot stick
https://murrays.com/products/air-flow-tels-red-green-set-of-14
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-0334.jpg?v=1676949554
AIR FLOW TELS SET
Air Flow Tels Set
Murrays Part# 007-0334
Air-flow Tels are wind-on-the-sail indicators that show the air flow across the sails, allowing you to trim sails for maximum performance. The result is better boat speed, less pinching, and no guesswork about placing the jib sheet lead forward or aft. No holes are required in the sails; waterproof adhesive locator discs attach the Tels. Tels are made of ripstop nylon for maximum sensitivity and long life.
https://murrays.com/products/anti-pitchpole-hydrofoil
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3240.jpg?v=1676949558
ANTI-PITCHPOLE HYDRO FOIL (PR)
https://murrays.com/products/axle-extender-h21-tornado
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/base-4-hole-flat-nacra-port
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-8011.jpg?v=1676949562
PAD NACRA 4-HOLE (PORT)
https://murrays.com/products/base-pad-flat-3-hole
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3001.jpg?v=1676949563
BASE PAD: FLAT 3-HOLE
Base Pad: Flat 3-Hole
Murrays Part# 25-3001
Use to mount a swivel cam to any flat surface. This adapter is not necessary when using Hobie's Offset Base Pad #07-1162.
https://murrays.com/products/base-pad-universal-you-drill
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-8014.jpg?v=1676949565
BASE PAD UNIVERSAL U-DRILL
Base Pad Universal U-drill
Murrays Part# 001-8014
This "potato chip" (2" OD) pad fits or can be modified to fit almost any main beam or mast extrusion for use with Harken micro cleats with fairleads or Ronstan small cleats with fairleads. To modify, put sandpaper on beam and rub base pad to suit and/or fill gap with silicone sealant and allow to dry before securing. Fasteners are not included.
https://murrays.com/products/base-pad-universal-3-hole-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-8013.jpg?v=1676949566
BASE PAD UNIVERSAL 3-HOLE KIT
This "potato chip" (2" OD) pad fits or can be modified to fit almost any main beam extrusion for use with a 3-hole swivel cleat. To modify, put sandpaper on beam and rub base pad to suit and/or fill gap with silicone sealant and allow to dry before securing.
https://murrays.com/products/batten-cap-leech-adjustable-foam-3-4-each
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-4080-1.jpg?v=1676949566
3/4" ADJUSTABLE FOAM BATTEN CAP (EA)
Batten Cap Leech Adjustable Foam 3/4"
Murrays Part# 012-4080-1
Glue this adjustable 3/4" x 5/16" end cap onto any solid epoxy or foam batten. Batten may need to be modified slightly to ensure a good fit.
Sold individually
https://murrays.com/products/batten-cap-leech-1-foam-main-each
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003.jpg?v=1676949567
FOAM MAIN SAIL BATTEN CAP 1"
LEECH CAP: 1" FOAM MAIN EACH
Glue this end cap onto any solid epoxy or foam batten. Batten may need to be modified slightly to ensure a good fit. Measure your batten and select a Perfect Pocket cap size accordingly.
TrenTec part number FB-10
https://murrays.com/products/batten-cap-leech-adjustable-main-prindle-each
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003_Prindle_batten_cap.jpg?v=1733790888
PRINDLE 16 MAIN ADJUSTABLE LEECH CAP
Leech Cap Adjustable Main Prindle
Murrays Part# 012-6003-1
No more knots at the trailing edge. These Perfect Pocket leech batten caps adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life.Tren Tec adjustable batten caps for Prindle catamaran mainsails. Leech caps are used on the trailing edge of the sail.
Sold individually
https://murrays.com/products/batten-cap-leech-adjustable-h16-jib-each
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-3004-1.jpg?v=1676949569
ADJUSTABLE LEECH JIB BATTEN CAP (EA)
Batten Cap Leech Adjustable H16 Jib Each
Murrays Part# 012-3004-1
No more knots at the trailing edge. Adjust Hobie® 16 jib sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual cap.
Sold Individually
https://murrays.com/products/batten-caps-leech-adjustable-foam-3-4-package-of-10
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-4080.jpg?v=1676949570
3/4" ADJUSTABLE FOAM LEECH CAPS (10)
https://murrays.com/products/batten-cap-leech-h14-h16-h17-h18-main-each
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003_f2e63f94-3b59-4816-94dd-a9bdac333e70.jpg?v=1676949571
H-14/16/17/18 MAIN BATTEN LEECH CAP
Batten Cap Leech H14/16/17/18 Main E
Murrays Part# 012-3003-1
No more knots at the trailing edge. Adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual batten cap for Hobie 14, 16, 17 or 18 main sail.
Mainsail batten cap for Saturn shape main sail battens used on Hobie, Prindle some Nacra sails.
Trentec part number BC-HM
Compare to Hobie 11323000
Sold individually
https://murrays.com/products/batten-caps-leech-adjustable-h14-h17-package-of-6
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003_b04b8506-517b-42e7-83dc-53adde6d9329.jpg?v=1676949573
H-14/17 ADJUSTABLE BATTEN LEECH CAPS (6)
H14/17 Adjustable Batten Leech Caps
Murrays Part# 012-2003
No more knots at the trailing edge. Adjust Hobie® 14 or Hobie® 17 sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes pre-cut line
Hobie Part# 1521
Sold in packages of 6
https://murrays.com/products/batten-caps-leech-adjustable-foam-main-1-package-of-10
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003_-_10.jpg?v=1733856051
ADJUSTABLE MAIN BATTEN LEECH CAPS 1" (10)
1" FOAM MAIN SAIL BATTEN CAP SET OF 10
Murrays Part# 012-8003
Glue this end cap onto any solid epoxy or foam main sail batten. Batten may need to be modified slightly to ensure a good fit. Measure your batten and select a Perfect Pocket cap size accordingly. Leech caps are for the trailing edge of the sail.
TrenTec part number FB-10
https://murrays.com/products/batten-caps-leech-adjustable-h16-jib-package-of-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-3004.jpg?v=1676949574
ADJUSTABLE JIB BATTEN CAPS (4)
Batten Cap Leech Adjustable H16 Jib
Murrays Part# 012-3004
No more knots at the trailing edge. Adjust Hobie® 16 jib sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual cap.
Sold in packages of 4
https://murrays.com/products/batten-caps-leech-adjustable-h16-main-package-of-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003_f915ccf7-445d-460e-8ec2-820c25384636.jpg?v=1676949575
H-16 ADJUSTABLE BATTEN LEECH CAPS (8)
Adjustable Leech Batten Caps H16
Murrays Part# 012-3003
No more knots at the trailing edge. Adjustable batten caps for Hobie® 16 enable sail shape adjustment in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes 8 batten caps and pre-cut line.
https://murrays.com/products/batten-caps-leech-adjustable-p16-package-of-9
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003Prindle_batten_cap.jpg?v=1733791032
PRINDLE 16 ADJUSTABLE BATTEN LEECH CAPS (9)
Batten Caps Leech Adjustable Prindle 16
Murrays Part#012-6003
No more knots at the trailing edge. These leech batten caps adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes 9 batten caps for Prindle 16 and pre-cut line. Tren Tec adjustable batten caps for Prindle catamaran mainsails. Leech caps are used on the trailing edge of the sail.
Sold in packages of 9, includes batten tie lines.
https://murrays.com/products/batten-caps-leech-adjustable-h18-main-package-of-10
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003_a50c803d-7a75-4a77-9f82-2491c80ef7a2.jpg?v=1676949577
H-18 MAIN ADJUSTABLE BATTEN LEECH CAPS (10)
H18 Main Adjustable Batten Leech Caps
Murrays Part# 012-4003
No more knots at the trailing edge. Adjust Hobie® 18 main sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life.
Hobie Part# 1523
Sold in packages of 10
https://murrays.com/products/batten-caps-leech-adjustable-p18-package-of-10
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003_55299a03-7207-4671-9274-bd18d5bc226f.jpg?v=1676949578
PRINDLE 18 ADJUSTABLE BATTEN LEECH CAPS
Batten Caps Leech Adjustable P18
Murrays Part# 012-7003
No more knots at the trailing edge. Adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes pre-cut line.
Sold in a package of 10
https://murrays.com/products/batten-caps-luff-angled-h14-package-of-6
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-2006.jpg?v=1676949580
H-14 ANGLED LUFF CAPS (6)
H14 Angled Luff Caps
Murrays Part# 012-2006
No more battens poking through next to the mast. Tren Tec angled luff caps for Hobie® 14 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten.
Hobie Part# 1561
Sold in packages of 6
https://murrays.com/products/batten-caps-luff-angled-h16-main-package-of-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-2006_c248e4d3-9dde-4795-a101-d1cd048376a7.jpg?v=1676949581
H-16 ANGLED LUFF CAPS (8)
H16 Angled Luff Caps
Murrays Part# 012-3005
No more battens poking through next to the mast! Tren Tec luff batten caps for Hobie® 16 main sail prevent batten splitting and align batten to the angle of the sail. Glue cap to the forward end of the batten.
Hobie Part# 1562
Sold in packages of 8
https://murrays.com/products/batten-caps-luff-angled-h18-package-of-10
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-2006_48bc1c1c-d2f9-4854-a6e7-8042f3380142.jpg?v=1676949581
H-18 ANGLED LUFF BATTEN CAPS
H18 Angled Luff Batten Caps
Murrays Part# 012-4005
No more battens poking through next to the mast. Ten angled Tren Tec luff caps for Hobie® 18 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten.
Hobie Part# 1563
Sold in packages of 10
https://murrays.com/products/batten-caps-luff-angled-p16-package-of-9
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-2006_Prindle_16_Angled_Batten_Luff_Caps.jpg?v=1745859399
PRINDLE 16 ANGLED BATTEN LUFF CAPS (9)
Prindle 16 Angled Batten Luff Caps
Murrays Part# 012-6005
No more battens poking through next to the mast. Angled luff caps prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten.
Sold in packages of 9
https://murrays.com/products/batten-caps-luff-h16-jib-package-of-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-3006.jpg?v=1676949584
H-16 JIB BATTEN LUFF CAPS (4)
Batten Caps Luff H16 Jib (Pack of 4)
Hobie Part# 012-3006
No more battens poking through next to the mast. This Tren Tec item includes four Hobie® 16 jib luff batten caps to prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Cat® uses #1566 for this item
https://murrays.com/products/batten-tensioner
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1528.jpg?v=1676949585
BATTEN TENSIONER
Batten Tensioner
Murrays Part# 007-1528
This great idea from Europe gives precision adjustment when tensioning battens. The screw thread adjuster allows as fine an adjustment as you want. It clips to the sail at the batten tie strip grommets and pushes against the end of the batten. No batten cap is required.
Hobie Cat® Part# 1528
https://murrays.com/products/big-cat-catamaran-righting-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-8293-2-400x400.jpg?v=1738347699
BIG CAT RIGHTING SYSTEM
https://murrays.com/products/big-foot-6-wheel-heavy-duty-pwc-cart
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/13-1506-1-1-scaled.jpg?v=1676949588
BIG FOOT 6-WHEEL HD PWC CART W/COUPLER 2"
https://murrays.com/products/black-max-wind-indicator
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/08-1295.jpg?v=1676949589
BLACK MAX WIND INDICATOR
Black Max Wind Indicator
Murrays Part# 008-1295
Durable windvane made for the abuses of dinghy sailing.
Dinghy sailing is more demanding of both sailors and equipment—both can get a beating on the water. The Black Max Dinghy Windvane was built stand by you take the abuse. This compact windvane mounts to the mast or boom to provide constant feedback of apparent wind angle. The needle bearing of the high-impact plastic vane optimizes sensitivity in light air.
https://murrays.com/products/bolt-allen-head-1-4-20-x-2-5-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2222.jpg?v=1676949590
BOLT ALLEN HEAD 1/4-20 X 2.5" SS
Bolt Allen Head 1/4-20 X 2.5 (Stainless Steel)
Murrays Part# 19-2222
Stainless steel Allen head bolt is used on Prindle tiller connector. Measures 1/4-20 x 2.5"
https://murrays.com/products/bolt-hex-head-1-2-13-x-3-75-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2240.jpg?v=1676949593
BOLT HEX HEAD 1/2-13 X 3.75" (SS)
Bolt Hex Head 1/2-13 X 3.75 (Stainless Steel)
Murrays Part# 19-2240
Stainless steel hex head bolt for older Hobie® 16 pylon.
Compare to Hobie® Part#50-8040731
https://murrays.com/products/bolt-hex-head-1-4-20-x-2-25-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2221.jpg?v=1676949593
BOLT HEX HEAD 1/4-20 X 2.25" (SS)
Bolt Hex Head 1/4-20 X 2.25
Stainless Steel
Murrays Part# 19-2221
Prindle 16/18 and Hobie® rudder bolt. Stainless steel 1/4-20 x 2-1/4" hex head bolt.
https://murrays.com/products/bolt-hex-head-1-4-20-x-2-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2220.jpg?v=1676949594
BOLT HEX HEAD 1/4-20 X 2" (SS)
Bolt Hex Head 1/4-20 X 2 (Stainless Steel)
Murrays Part# 19-2220
Stainless steel hex head bolt measures 1/4-20 x 2". Substitute for discontinued item #56-F124 and is a slightly longer replacement for #56-F191. Similar to Prindle F120
https://murrays.com/products/bolt-hex-head-1-4-20-x-3-5-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2224.jpg?v=1676949595
BOLT 1/4-20 X 3.5" (SS)
Bolt Hex Head 1/4-20 X 3.5"
Stainless Steel
Murrays Part# 19-2224
Stainless steel hex head bolt measures 1/4-20 x 3-1/2"
Pylon Bolt for newer H16
Hobie Part# 8040361
https://murrays.com/products/bolt-hex-head-1-4-20-x-5-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2226.jpg?v=1676949597
BOLT HEX HEAD 1/4-20 X 5" (SS)
Bolt Hex Head 1/4-20 X 5" (Stainless Steel)
Murrays Part# 19-2226
Stainless steel 1/4-20 x 5" hex head bolt is used for Hobie® 18 mast rotation arm. Use #19-2516 nut.
Equivalent to Hobie® Part# 8040111
https://murrays.com/products/bolt-hex-head-1-4-20-x-4-5-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2227.jpg?v=1676949598
BOLT HEX HEAD 1/4-20 X 4.5" (SS)
Bolt Hex Head 1/4-20 X 4.5" (Stainless Steel)
Murrays Part# 19-2227
Stainless steel mast bolt for Hobie® 20 is 1/4-20 x 4-1/2" long. Also fits Hobie® 17/20 and Nacra mast rotation arm (#25-3040)
https://murrays.com/products/bolt-hex-head-3-8-16-x-2-5-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2239.jpg?v=1676949599
BOLT HEX HEAD 3/8-16 X 2.5" (SS)
Bolt Hex Head 3/8-16 X 2.5" (Stainless Steel)
Murrays Part# 19-2239
Stainless hex head bolt is used on Nacra and Prindle crossbar.
https://murrays.com/products/bolt-hex-head-5-16-18-x-2-25-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2230.jpg?v=1676949601
BOLT HEX HEAD 5/16-18 X 2.25" SS
Bolt Hex Head 5/16-18 X 2.25
(Stainless Steel)
Murrays Part#19-2230
Stainless steel hex head bolt measures 5/16-18 x 2-1/4"
https://murrays.com/products/bolt-hex-head-5-16-18-x-1-5-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2229.jpg?v=1676949602
BOLT HEX HEAD 5/16-18 X 1.5"
Bolt Hex Head 5/16-18 X 1.5"
Murrays Part# 19-2229
Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting.
Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164
https://murrays.com/products/bolt-hex-head-5-16-18-x-3-75-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2235.jpg?v=1676949603
BOLT HEX HEAD 5/16-18 X 3.75" SS
Bolt Hex Head 5/16-18 X 3.75
Stainless Steel
Murrays Part# 19-2235
Stainless steel 5/16-18 x 3-3/4" hex head bolt
Equivalent to Hobie Cat® item #8040381
https://murrays.com/products/bolt-hex-head-5-16-18-x-2-50-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2231.jpg?v=1676949603
BOLT HEX HEAD 5/16-18 X 2.50" SS
Bolt Hex Head 5/16-18 X 2.50" Stainless Steel
Murrays Part# 19-2231
Stainless steel rudder bolt for all Hobie® Cats measures 5/16-18 x 2.50".
Used on Hobie Getaway Bow Spreader - Bow Tang Bolt. Rudder bolt for both the upper and lower rudder casting.
Compare to Hobie Cat® Part# 8040341
https://murrays.com/products/bolt-hex-head-5-16-18-x-4-50-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2237.jpg?v=1676949605
BOLT HEX HEAD 5/16-18 X 4.50" SS
Bolt Hex Head 5/16-18 X 4.50" (Stainless Steel)
Murrays Part# 19-2237
Stainless steel hex head bolt for Prindle mast rotation control arm. Use #19-2520 nylock nut.
This bolt is a replacement for item #56-F110
Comparable to Hobie Part# 8040211
https://murrays.com/products/bolt-hex-head-8mm-x-1-1-8-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2210.jpg?v=1676949606
BOLT HEX HEAD 8mm 1-1/8" (SS)
Bolt Hex Head 8mmX1-1/8 Stainless Steel
Murrays Part#19-2210
Stainless steel hex head bolt measures 8mm x 1-1/8"
https://murrays.com/products/bolt-hex-head-5-16-18-x-3-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2232.jpg?v=1676949607
BOLT HEX HEAD 5/16-18 X 3" (SS)
Bolt Hex Head 5/16-18 X 3" (Stainless Steel)
Murrays Part# 19-2232
Stainless steel hex head bolt measures 5/16-18 x 3"
https://murrays.com/products/bolt-hex-head-8mm-x-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2208.jpg?v=1676949607
BOLT HEX HEAD 8mm X 16"
Bolt Hex Head 8mm x 16"
Murrays Part# 19-2208
Stainless steel hex head bolt measures 8mm x 16"
https://murrays.com/products/bolt-hex-head-8mm-x-25mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2209.jpg?v=1676949609
BOLT HEX HEAD 8mm X 25mm
Bolt Hex Head 8mm x 25mm
Murrays Part# 19-2209
Stainless steel hex head bolt measures 8mm x 25mm
https://murrays.com/products/bristle-brush-1
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/bullseye-fairlead
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-7851.jpg?v=1676949611
BULLSEYE FAIRLEAD
Bullseye Fairlead
Murrays Part# 22-7851
Bulls-eye fairlead has a 7/16" line capacity. Mount with two #10-32 x 1" screws (#19-2915).
https://murrays.com/products/bullseye-fairlead-with-ferrule
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-0323.jpg?v=1676949613
RONSTAN BULLSEYE FAIRLEAD WITH FERRULE
Ronstan Bullseye with Ferrule
Murrays Part# 25-0323
Stainless ferrule eliminates with nylon housing, the stainless center coating prevents grooving and wear from uses. Allows for up to 7/16" line capacity.
Mounting: Two screws ordered separately (#10-32x1") part number 19-2915.
https://murrays.com/products/cant-miss-rings-pair-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Can_t_miss_Trapeze_Handle_001-0124_2004BLK.png?v=1758820973
CAN'T MISS RINGS
Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle
https://murrays.com/products/carbine-hook-plastic
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0127_2.jpg?v=1676949615
PLASTIC CARBINE HOOK
Carbine Hook (Plastic)
A quick connection of trapeze shock cord to height control adjustment. 2-1/4" long. Compare to Hobie Cat® #2101.
https://murrays.com/products/carabiner-hook-1-4-x-2-3-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-4156.jpg?v=1676949616
CARABINER HOOK 1/4" x 2-3/8"
Carabiner Hook1/4" x 2-3/8"
Murrays Part# 22-4156
Carabiner hook is constructed of 316 stainless steel. Specifications: 1/4" diameter, 2-3/8" length, weighs .08 lb. with 700 lb. breaking strength.
https://murrays.com/products/carbon-key-hole-buckle-only
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0311.jpg?v=1676949618
CARBON KEY HOLE BUCKLE
Carbon Key Hole Buckle
Murrays Part# 001-0311
The safety-minded Carbon Key-Hole buckle system offers many advantages over the traditional hook design. Its low profile design is less likely to get hooked unintentionally and the system will stay hooked until purposefully removed. A low profile means much easier reboarding and less likelihood of scratching gel coat, point loading or damaging a hull. Ball-end trapeze rings are lighter and less dangerous than stainless dogbones or trapeze rings.
https://murrays.com/products/cant-hurt-trapeze-rings
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0123-1.jpg?v=1676949620
CAN'T HURT TRAP RINGS (PR)
Can't Hurt Trap Rings
Murrays Part# 001-0123
Can't Hurt Trap Rings are a light and flexible alternative to "hard" stainless steel dogbones. Black high pressure nylon tubing covers 1/8" (1x19) stainless wire.
Compare to Hobie Cat® #2003.
Sold in pairs
https://murrays.com/products/cat-bag-5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1169_57b0d481-62e4-4fa9-82df-da79076f9262.jpg?v=1676949620
5" PORT CAT BAG
Port Cat Bag 5"
Murrays Part# 001-1178
The Cat Bag provides handy storage inside a deck port! Designed to hang inside 5" access port (#01-4210 or #01-4210BK) on a molded shoulder.
Details:
12" deep
Comes in one color: red
Metal collar - gap in ring for easy installation
Cinch bag style
https://murrays.com/products/cat-bag-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1169_fc2f6167-1192-4433-a276-d657f9711a8d.jpg?v=1676949620
4" PORT CAT BAG
Cat Bag 4"
Murrays Part# 001-1169
The Cat Bag provides handy storage inside a deck port! The sturdy nylon bag with plastic collars hangs inside 4" access port on a molded shoulder. 12" deep. Hobie Cat® uses #5402 for this item.
https://murrays.com/products/cat-righter-uphaul-cam-cleat-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3273.jpg?v=1676949622
CAT RIGHTER UPHAUL: CAM-CLEAT 4:1
Cat Righter Uphaul: Cam-Clt 4:1
Murrays Part# 001-3273
This is the 4:1 block and tackle system only from Murrays' popular Cat Righting Big Bag System (#01-3280). Use with a righting bag to aid in righting a capsized catamaran.
https://murrays.com/products/cat-bag-righting-big-bag-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3280-2013.jpg?v=1676949624
CAT BAG RIGHTING BIG BAG SYSTEM
Big Bag Cat Righting System
Murrays Part# 001-3280
Our Cat Righting Big Bag System is a must for solo or lightweight crews to feel confident being able to right a capsized catamaran. It is powerful enough to right bigger cats without loosening shrouds. and is easy to install with no boat modification required. The bag attaches with hook and loop straps under the tramp for easy use and storage. Class legal for racing! Theoretical maximum capacity of the 18" x 32" bag is 250 lbs. The included 4:1 block and
https://murrays.com/products/cat-shackle-tool
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0006-2011.jpg?v=1676949624
CAT SHACKLE TOOL
Cat Shackle Tool
Murrays Part# 001-0006
This stamped stainless steel tool is a screwdriver, bottle opener, shackle tool and 3/8" and 5/16" wrench. The shackle key also aids in getting pins out of shackles and loosening drain plugs.
Compare to Hobie Cat® Part# 83101
https://murrays.com/products/cat-trax-axle-hose-cover
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/13-1401-6.jpg?v=1676949626
CAT TRAX AXLE HOSE COVER (EA)
Cat Trax Axle Hose Cover
Murrays Part# 13-1401-6
Replacement hose cover for Cat Trax axle helps cushion your boat's hulls.
Item sold individually
https://murrays.com/products/cat-trax-hull-cradles-wide-for-inter-17-i-18-i-20-infusion-n15-pair
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/cat-trax-wide-cradle.jpg?v=1676949628
CAT TRAX WIDE HULL CRADLES
https://murrays.com/products/cat-trax-molded-end-cap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Cat-trax-end-cap.jpg?v=1676949628
CAT TRAX MOLDED END CAP (EA)
Cat Trax Molded End Cap
Murrays Part# 13-1403
Replacement molded end cap keeps the boat from sliding off the end of the Cat Trax axle. Carpet protects your boat. Sold individually
Hobie Cat® Part# 1620
https://murrays.com/products/cat-trax-t-handle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/cat-trax-t-handle.jpg?v=1676949630
CAT TRAX T-HANDLE-HARDWARE INCLUDED
https://murrays.com/products/cat-trax-cradles-pair
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Cat-trax-cradles.webp?v=1676949631
CAT TRAX CRADLES (PAIR)
https://murrays.com/products/cat-trax-tire-rim
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/tire-and-rim.jpg?v=1676949632
CAT TRAX TIRE & RIM ASSEMBLY (EACH)
Cat Trax Tire Rim Assembly
Murrays Part# 13-1401-1
Replacement Cat Trax balloon tire and rim assembly.
Typically Ships from the manufacturer, which adds to the lead time.
Hobie Cat® Part# 1635
https://murrays.com/products/cat-trax-tire-tube
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/cat-trax-tire-tube.jpg?v=1676949632
CAT TRAX TIRE TUBE
Cat Trax Tire Tubes
Murrays Part# 13-1401-9
Add an inner tube to the tire(s) of your Cat Trax beach dolly to prevent air leaks or squeeze some life out of your old tires.
Sold individually
https://murrays.com/products/catamaran-footstrap-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2015.jpg?v=1676949635
DAKINE CATAMARAN FOOTSTRAP KIT (PR)
he comfortable, 6" adjustable foot straps feature 7mm neoprene padding to comfortably accommodate bare feet or sailing shoes. Their pre-formed arch eliminates collapsing and the exterior hook and loop closure system allows for quick and easy adjustment. Drilling instructions and self-tapping screws are included.
https://murrays.com/products/catamaran-universal-righting-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-8292-2-400x400.jpg?v=1738347380
UNIVERSAL RIGHTING SYSTEM
Catamaran Universal Righting System
Murrays Part# 001-8292
The Universal Righting System is simple and effective with large, 1/2" diameter, black polypropylene righting line that is light and easy to access and grip, even when wet. The line self-returns under the tramp after use. There are no knots to pre-tie or untie. The shock cord and pulleys provided hold line snug and are external, so they are easy to adjust and service. Fits 8' to 8'6" wide catamarans; ideal for boats with flush-deck trampoline.
https://murrays.com/products/channel-insert-10-32-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/03-0190.jpg?v=1676949638
CHANNEL INSERT M4 - .7mm with SCREW
https://murrays.com/products/chinook-base-cup-with-double-button
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/03-0281.jpg?v=1676949641
CHINOOK BASE CUP WITH DOUBLE BUTTON
Chinook Base Cup with Double Button
Murrays Part# 003-0281
American standard heavy duty plastic base cup with 3/8" double push button has brass insert and cover which prevents sand from jamming parts.
https://murrays.com/products/cat-trax-tire-only-21x12-0-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/cat-trax-tire-only.jpg?v=1676949648
CAT TRAX TIRE ONLY 21X12
Cat Trax Tire Only 21x12
Murrays Part# 13-1401-3
Replacement 21″x12.0-8 tire only (without rim) for Cat Trax beach wheels.
https://murrays.com/products/chinook-mechanical-universal-joint
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-9525.jpg?v=1676949643
CHINOOK MECHANICAL UNIVERSAL JOINT
Chinook Mechanical Universal Joint
Murrays Part# 001-9525
Chinook mechanical replacement universal joint for mast base has 8mm female threads on both ends.
https://murrays.com/products/chinook-rig-winch-with-euro-pin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/03-4002.jpg?v=1676949645
CHINOOK RIG WINCH WITH EURO PIN
Chinook Rig Winch with Euro Pin
Murrays Part# 003-4002
Launch sooner and sail longer with this portable downhaul crank! It is ultra-powerful, so it's easy to precisely tune sails and cleat the downhaul line in exactly the right position. Includes a pin for compatibility with Euro pin systems and a built-in base cup that fits most base cup systems except newer Streamlined.
https://murrays.com/products/cinch-ring
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/cinch-ring_1_5159053c-a241-4ebc-83d7-0ec0aa22b753.jpg?v=1754416933
CINCH RINGS - Stainless Steel SOLD EACH
https://murrays.com/products/clamcleat-boom-cleat-clam
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0244.jpg?v=1676949649
CLAMCLEAT BOOM CLEAT WITH CLEAT AND CLAM
https://murrays.com/products/clamcleat-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0702.png?v=1676949651
CLAMCLEAT (ALUMINUM)
Clamcleat (Aluminum)
Murrays Part# 27-0702
Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 1/8"-1/4". 2 5/8" hole spacing.
This cleat is a substitution for Hobie Part# 61070000
https://murrays.com/products/clamcleat-handle-for-cl253-trapeze-cleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0834.jpg?v=1676949651
CLAMCLEAT HANDLE FOR TRAPEZE CLEAT
Clamcleat Handle For Trapeze Cleat
Murrays Part# 27-0834
The 27-0834 handle is designed for a perfect fit on the Clamcleat® silver CL253 (#27-0253) and CL253AN hard-anodized (#27-0253A) trapeze cleats. Developed in conjunction with the racing specialists at Shock Sailing, the handle is light weight, the perfect size and very comfortable to use.
https://murrays.com/products/clamcleat-midi-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0209.jpg?v=1676949653
CLAMCLEAT MIDI (NYLON)
Clamcleat Midi (Nylon)
Murrays Part# 27-0209
Replace old, worn-out outhaul and downhaul Clamcleats®. Nylon cleats have less wear resistance than aluminum, but are less expensive. Easy to mount. Line capacity is 3/16"-5/16". 2 1/8" hole spacing.
https://murrays.com/products/clamcleat-auto-release-racing-mini-cl257
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0257.jpg?v=1676949656
CLAMCLEAT AUTO-RELEASE RACING MINI CLEAT
Clamcleat Auto-Release Racing Mini
Murrays Part# 27-0257
The Clamcleat® Auto-Release cleat provides the neatest and best solution to the problem of how to lock-down a rudder blade, yet allow it to flip-up if it hits the bottom or a solid obstacle in the water. The cleat holds ropes securely, but will release them immediately when the cleat is overloaded. Once tripped, it can be easily reset in seconds by just pushing the cleat back down into its base.
https://murrays.com/products/clamcleat-kite-trapeze-hard-anodized
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0253.jpg?v=1676949655
CLAMCLEAT KITE & TRAPEZE HARD ANODIZED
Clamcleat Kite Trapeze Hard Anodized
Murrays part# 27-0253A
This Clamcleat® aluminum rope cleat has a black hard-anodized coating that wears better than non-anodized when used with sandy line. Bottom roller. Rope size: 3/16" - 5/16" (4-8mm). Length: 3-1/2".
Clamcleat version of a Ronstan RF5121
https://murrays.com/products/clamcleat-powergrip-i
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0261.jpg?v=1676949657
CLAMCLEAT POWERGRIP I
Clamcleat PowerGrip I
Murrays Part# 27-0261
The 27-0261 Clamcleat® Power Grip 1 is for single-handed use. It allows you to pull twice the load compared to using your bare hand and is equally suitable for right- or left-handed use. Line pulls from center of tool. The anodized aluminum tool features two sets of grip cleats to grip 1/8"-1/4" diameter lines. Tool length is 3-3/4" long.
Hobie Cat® uses item Part# 2070 for the Power Grip I.
https://murrays.com/products/clamcleat-powergrip-ii
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0262.jpg?v=1676949657
CLAMCLEAT POWERGRIP II
Clamcleat PowerGrip II
Murrays Part# 27-0262
The Clamcleat® CL262 Power Grip 2 is for two-handed use where even more pulling power and control are required. It is light, strong and convenient to carry in your pocket. The anodized aluminum tool grips 3/32" to 1/4" diameter lines.
https://murrays.com/products/clamcleat-racing-midi-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0254.jpg?v=1676949660
CLAMCLEAT RACING MIDI ALUMINUM
Clamcleat Racing Midi Aluminum
Murrays Part# 27-0254
Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 5/32"-5/16". 2 1/8" hole spacing.
https://murrays.com/products/clamcleat-leech-line-cleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/IMG_2203.jpg?v=1676949661
CLAMCLEAT LEECH LINE CLEAT
Clamcleat Leech Line Cleat
Murrays Part# 27-0212
Jib halyard tensioning cleat for zippered luff jibs. The low-profile, white nylon Clamcleat® can be sewn or riveted onto sails and technical fabrics. It can be mounted in two positions on the sail.
The tooth design allows a quick, positive lock that is easy to release. It is an ideal cleat for adjusting leech lines. Use a backplate when riveting a cleat onto fabric, as it will prevent the rivet pulling through.
Includes: backing plate and 2x flare rivet
https://murrays.com/products/clamcleat-racing-mini
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-1222.jpg?v=1676949662
CLAMCLEAT RACING MINI
Clamcleat Racing Mini
Murrays Part# 27-1222
The CL222 Racing Mini aluminum Clamcleat® is small, neat and lightweight and can be fixed to horizontal or vertical surfaces. It is a very useful cleat for small dinghies, and is also used in kiteboarding on bars and for adjusting the 5th line on kites.
https://murrays.com/products/clamcleat-trapeze-vang-cleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0253_7c10ceaf-a847-45ac-89fe-b99be1ac2647.jpg?v=1676949662
CLAMCLEAT TRAP & VANG CLEAT
Clamcleat Trapeze & Vang Cleat
Murrays Part# 27-0253
The Clamcleat® trapeze and vang cleat allows for 2:1 trapeze adjustment while hooked up. Line rolls easily on large base roller. 1/4" line capacity. Each.
Clamcleat version of a Ronstan Part# RF5121
https://murrays.com/products/clear-monofilm-sail-repair-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-3501.jpg?v=1676949666
MONOFILM SAIL REPAIR KIT
Monofilm Sail Repair Kit
Murrays Part# 010-3501
This is the "big kit" that you asked for. Heavy duty, 3 mil-thick clear monofilm comes in a big 20" x 27" sheet. Material is stored and protected inside a clear 2-1/8" diameter tube with reusable caps. For use on Mylar sails and other clear similar sail materials.
https://murrays.com/products/clevis-pin-1-4-x-1-1-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-9803.jpg?v=1676949666
CLEVIS PIN 1/4 X 1-1/8"
Clevis Pin 1/4 X 1-1/8
Murrays Part# 22-9803
Stainless steel clevis pin measures 1/4" diameter x 1-1/8" grip length (shoulder to the split ring hole).
Compare to Hobie Part 8020420 and 8020410
https://murrays.com/products/clamcleat-with-top-roller-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0236.jpg?v=1676949667
CLAMCLEAT WITH TOP ROLLER (ALUMINUM)
Clamcleat with Top Roller (Aluminum)
Murrays Part# 27-0236
Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 1/8"-1/4".
https://murrays.com/products/clevis-pin-1-4-x-1-3-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9809.jpg?v=1734545167
CLEVIS PIN 1/4 X 1-3/4"
Clevis Pin 1/4 x 1-3/4"
Murrays Part# 22-9809
Stainless steel clevis pin measures 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole)
https://murrays.com/products/clevis-pin-1-4-x-1-3-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/8020431_Hobie_clevis_pin_.25_x_1.375.jpg?v=1747411371
CLEVIS PIN 1/4 X 1-3/8"
Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole).
Uses:
This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles.
Hobie 18 main traveler car
Prindle Part# 6004
Comparable to Hobie Cat® Part# 8020431
https://murrays.com/products/clevis-pin-3-16-x-1-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-9801.jpg?v=1676949672
CLEVIS PIN 3/16 x 1/2"
3/16 X 1/2" Clevis Pin
Murrays Part# 22-9801
Stainless steel clevis pin measures 3/16" diameter x 1/2" grip length (shoulder to the split ring hole).
Prindle / Nacra Part# 9412
Compare to Hobie Cat® Part# 8020041
https://murrays.com/products/clevis-pin-1-4-x-5-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-9802.jpg?v=1676949672
CLEVIS PIN 1/4 X 5/8"
Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
https://murrays.com/products/clevis-pin-3-16-x-1-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/download_092e7dd8-d0de-4d7a-8f49-03bf1cec772b.jpg?v=1739294741
CLEVIS PIN 3/16 X 1-1/4
3/16 X 1-1/4" Clevis Pin
Murrays Part# 22-9807
Stainless steel clevis pin. Measurement is 3/16" diameter x 1-1/4" grip length (shoulder to the split ring hole).
Can replace Hobie Part# 8020340 Hobie Wave Mast Head Sheave Pin
https://murrays.com/products/clevis-pin-3-16-x-7-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/8020061z103.jpg?v=1725653692
CLEVIS PIN 3/16 X 7/8"
3/16 X 7/8" Clevis Pin
Murrays Part# 22-9806
3/16 x 7/8 Clevis Pin. H16 gooseneck shackle clevis pin.
Hobie Part# 8020061
https://murrays.com/products/clevis-pin-3-16-x-5-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9805_Clevis_Pin_3_16_X_5_8_Murrays_Part_22-9805_Stainless_steel_clevis_pin._Measurement_is_3_16_diameter_x_5_8_grip_length.jpg?v=1758319003
CLEVIS PIN 3/16 X 5/8"
Clevis Pin 3/16 X 5/8"
Murrays Part# 22-9805
Stainless steel clevis pin. Measurement is 3/16" diameter x 5/8" grip length (shoulder to the split ring hole).
Hobie Cat Part number 8020041
https://murrays.com/products/clevis-pin-headless-3-16-x-1-1-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9811.jpg?v=1723565358
HEADLESS CLEVIS PIN 3/16 X 1-1/2"
Clevis Pin Headless 3/16 X 1-1/2
Murrays Part# 22-9811
Stainless steel mast step hinge pin for Hobie® 16 has a hole on each end. Measures 3/16" diameter by 1-1/2" long.
Part of the Hobie mast step link kit 21380001
https://murrays.com/products/clevis-pin-headless-1-4-x-3-3-8-hobie-18-mast-hinge-pin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9815-2.jpg?v=1712675912
HEADLESS CLEVIS PIN 1/4 X 3-3/8"
Hobie 18 mast step hinge pin, has a hole on one end only. The headless clevis pin measures 1/4″ diameter by 3-3/8″ grip length Hobie Part # 8020501
https://murrays.com/products/clew-kit-5-hole-hobie-16-jib
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1012_2.jpg?v=1676949682
H-16 5 HOLE JIB CLEW KIT
Clew Kit 5-Hole (H16 Jib)
Murrays Part# 001-1012
Clew kit for Hobie® 16 jib includes one pair of anodized aluminum plates with rivets to be set with a hammer. Each plate has five holes and measures 8" maximum length by 1-1/2" wide. Replacement rivets are available separately (#19-5006).
This product replaces discontinued item #50-22240000.
https://murrays.com/products/contoured-spacer-plastic
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-0061.jpg?v=1745534833
PLASTIC CONTOURED SPACER
https://murrays.com/products/cotter-pin-3-32-x-3-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1015.png?v=1676949684
COTTER PIN 3/32 X 3/4" SS
Cotter Pin 3/32 X 3/4
Murrays Part# 19-1015
Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111.
Stainless steel cotter pin measures 3/32" x 3/4".
https://murrays.com/products/cotter-pin-for-cat-trax
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/IMG_1182-300x300.jpg?v=1704983777
CAT TRAX COTTER PIN STAINLESS STEEL
Cat Trax Cotter Pin Stainless Steel
Murrays Part# 13-1401-8
Replacement cotter pin for Cat Trax beach wheels.
https://murrays.com/products/d-ring-2-id-x-25
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3904.jpg?v=1676949687
D RING SS 1/4 X 2"
D Ring 2" ID x .25"
Murrays Part# 25-3904
Stainless "D" ring measures 1/4" x 2" outside diameter.
https://murrays.com/products/dacron-insignia-cloth-black-per-yard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/85540_psp_dacron_insignia_tape_black_75mmx1.5m.webp?v=1739469410
DACRON INSIGNIA CLOTH - BLACK
https://murrays.com/products/dacron-sail-tape-white-3oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-3430.jpg?v=1676949688
DACRON 3OZ MAINSAIL TAPE-WHITE
Dacron 3oz Sail Tape-White
Murrays Part# 010-3430
Quickly mend tears in Dacron sails, covers, rain gear and seats. The heavy-duty, 3-oz. Dacron sailcloth makes long-lasting emergency repairs or provides effective reinforcement for worn areas. Features quick marine adhesive backing; can be stitched for permanent repair. Our white Dacron sail repair tape is 3" x 15'.
https://murrays.com/products/dart-18-forestay-1-8-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Bare_Bridle.jpg?v=1729613871
DART-18 FORESTAY 1/8" BARE
DART-18 FORESTAY 1/8 BARE
https://murrays.com/products/deck-box-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/03-3020.jpg?v=1676949695
DECK BOX 8"
Deck Box 8"
Murrays Part# 003-3020
8" fiber-filled, molded plastic deck box. Windsurfing mast track deck insert.
https://murrays.com/products/digital-8-sail-number-12-black-10-pack
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-2108BK.jpg?v=1676949695
DIGITAL 8 SAIL NUMBER
Digital 8 Sail Number
Murrays Part# 010-2108BK
Make any number and many letters from this peel-and-stick, black 12" black digital number 8. Small notches in the perimeter identify where to cut to make your desired digit.
Details:
Color: Black
Size: 12"
Quantity: Pack of 10
https://murrays.com/products/delrin-roller-bearing-set-20-for-cat-trax
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/cat-trax-bearing-set_55bbcdad-d937-45d1-9187-0bd1623d1a1b.jpg?v=1676949695
CAT TRAX DELRIN ROLLER BEARING SET (20)
Cat Trax Delrin Roller Bearing Set
Murrays Part# 13-1401-5
Set of 20 roller bushings for one Cat Trax wheel. Tiger Trax require 2 sets per wheel.
Sold in set of 20
https://murrays.com/products/clevis-pin-1-4-x-1-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-9808.jpg?v=1676949709
CLEVIS PIN 1/4 X 1/2"
Clevis Pin 1/4 X 1/2
Murrays Part# 22-9808
Stainless steel clevis pin. Measurement is 1/4" diameter x 1/2" grip length (shoulder to the split ring hole). Substitute for Hobie Cat® #8020371.
https://murrays.com/products/dolphin-striker-eye-bolt-hobie-14
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-0106.jpg?v=1721231198
H-14 DOLPHIN STRIKER EYE BOLT
Dolphin Striker Eye Bolt H14
Murrays PN 001-0106
This part is used as part of the Murrays H14 Dolphin Striker Kit.
Replacement stainless steel post for #01-2083 dolphin striker for Hobie® 14.
19-2524 nylock nut is needed and not included with this part.
https://murrays.com/products/dogbone-trapeze-ring
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/25-3610.png?v=1719430009
RONSTAN FIGURE 8 TRAPEZE RING (EACH)
Ronstan Figure 8 Trapeze Ring
Murrays Part# 25-3610
Original equipment for Hobie® trapeze systems, the figure 8 ring is 6" long with 1-1/2" rings.
https://murrays.com/products/downhaul-cheek-block-for-hobie
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/25-3340.jpg?v=1734558563
HOBIE CHEEK BLOCK - 20710000
Hobie Halyard - Downhaul Cheek Block - 20710000
Murrays Part# 25-3340
The plastic sheave degrades and breaks on older Hobie® 16 downhaul cheek blocks and the entire block must be replaced. Also fits Sol Cat 18. Hole spacing 1/2" on center from side to side; 2-3/4" on center from end to end.
To install, use four #19-5031 6-4 rivets and four #19-5020 sealing casings.
Hobie Cat® Part# 20710000.
https://murrays.com/products/downhaul-cleat-with-screws
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1020-1.jpg?v=1726088501
DOWNHAUL CLEAT WITH SCREWS
Downhaul Cleat with Screws
Murrays Part# 001-1020
The Downhaul Cleat Kit is for mounting in mast track (such as Hobie 16) and includes cleat, screws and channel inserts. Center-to-center hole spacing is 1-1/8". We have another kit for the halyard cleats on the side of the mast that includes rivets.
https://murrays.com/products/downhaul-kit-6-1-h14-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/007-2089__94853.jpg?v=1736276356
H-14/16 6:1 DOWNHAUL KIT
Downhaul Kit: 6:1 Hobie 14/16
Murrays Part# 007-2089
This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo block. Includes Class-approved attachment for base of mast, all hardware and line. Use with gooseneck bearing kit (#12-2050).
Hobie Part# 2089
https://murrays.com/products/downhaul-kit-6-1-with-harken-micro-euro
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/H-14-166to1DOWNHAULKIT.png?v=1736278694
H-14/16 6:1 DOWNHAUL KIT
H14/16 6:1 Downhaul Kit
Murrays Part# 007-2089-1
This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo blocks.
Includes: Class-approved mast track attachment, all hardware and line.
Recommended for use with gooseneck bearing kit (#012-2050)
Hobie Part# 2089
https://murrays.com/products/downhaul-kit-hobie-14-hobie-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/DOWNHAUL_KIT_HOBIE_16.png?v=1736277783
H-14/16 DOWNHAUL KIT
Downhaul Kit: H14/16
Murrays Part# 001-1028
This class legal 3:1 downhaul kit for Hobie® 14 or Hobie 16 includes Harken bullet block with becket and swivel, and 6 feet of 3/16" low-stretch, 8-strand line. This kit works with the stock downhaul horn cleat at the base of the mast.
This is a fantastic economical and simple solution for the recreational sailor.
Hobie part number 2081
https://murrays.com/products/drain-plug-for-hobie-nacra-and-prindle-catamarans
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10091000-Universal_Drain_Plug_for_most_Hobie_Nacra_and_Prindle_Catamarans_which_includes_a_gasket_and_fits_most_Hobie_Nacra_and_Prindle_catamarans..jpg?v=1732312265
HOBIE DRAIN PLUG WITH GASKET
Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000
https://murrays.com/products/downhaul-scale
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/HOBIE_DOWNHAUL_SCALE_-_2082.png?v=1736277154
HOBIE DOWNHAUL SCALE
HOBIE DOWNHAUL SCALE - 2082
Can you ever remember where the downhaul was set that day you “smoked” everyone. This handy stick on scale takes the guess work out of setting the downhaul.
https://murrays.com/products/drain-plug-with-plastic-base
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0051.jpg?v=1676949714
DRAIN PLUG WITH PLASTIC BASE
Drain Plug with Plastic Base
Murrays Part# 001-0051
This lightweight and inexpensive drain plug features a molded recess in the molded nylon base that traps sealant (sold separately) in place, providing a more watertight seal. Gasket included.
https://murrays.com/products/elongated-trapeze-ring-7-1-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/25-3620.jpg?v=1732050890
ELONGATED TRAPEZE RING
ELONGATED TRAPEZE RING
Large trapeze ring made of solid 316 stainless steel for strength and longevity.
AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.
Hobie part number 2002, compare to Hobie part number 2001
Length: 7-1/2"
https://murrays.com/products/drain-plug-with-chromed-brass-housing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/drainplug.jpg?v=1676949720
RONSTAN PLASTIC DRAIN PLUG WITH CHROME BRASS HOUSING, 15/16" HOLE
Ronstan Plastic Drain Plug with Chrome Brass Housing, 15/16" Hole
Murrays Part# 21-0737
This lightweight and inexpensive plug features a molded recess in the base that traps sealant (sold separately) in place, providing a more watertight seal. Nylon plug is UV-stabilized. Retaining legs keep drain plug from falling out of hole when unscrewed. Includes chromed brass housing (body) and gasket.
https://murrays.com/products/ez-up-trapeze-kit-no-cut
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1120.jpg?v=1676949720
EZ-UP TRAP KIT: NO-CUT (PR)
trapeze adjustment kit - 3102 - Murrays EZ Up Trap Kit
https://murrays.com/products/fast-eye-snap-brass-2-1-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-136120.jpg?v=1676949721
FAST EYE SNAP BRASS 2-1/8"
Fast Eye Snap Brass 2-1/8"
Murrays Part# 27-136120
2-1/8" brass snap hook is convenient, but should not be used in critical, high-load situations.
https://murrays.com/products/ez-up-trapeze-kit-harken
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-1121.jpg?v=1761934832
EZ-UP TRAPEZE KIT
EZ-UP TRAP KIT: HARKEN - similar to Hobie part number 3102
https://murrays.com/products/fast-set-epoxy-2-part
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/00-0002-1.jpg?v=1676949724
FAST SET EPOXY
Fast Set Epoxy
Murrays Part# 000-0002-1
Some sailors like to "caramel-coat" the cork ball handle of the hiking stick with epoxy to make the cork ball last longer.
https://murrays.com/products/fairlead-for-harken-roller-furling-drum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-1066.jpg?v=1676949724
HARKEN FAIRLEAD FOR ROLLER FURLING DRUM
Harken Fairlead for Roller Furling Drum
Murrays Part# 25-1066
A fairlead directs line to coil evenly on a roller furling drum, reducing snagging and increasing drum line capacity.
https://murrays.com/products/fiberglass-stain-remover
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-0790.jpg?v=1676949730
FIBERGLASS STAIN REMOVER
Fiberglass Stain Remover
Murrays Part# 007-0790
This stain-absorbing gel removes oil, rust and stains, road soil on your boat or other fiberglass surfaces. Simply apply, wait a few minutes, then wipe off. Fiberglass Stain Remover is non-abrasive and requires no sanding or compounding. It also removes rust stains from cloth. 16 oz.
https://murrays.com/products/fiddle-block-with-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/25-3901.jpg?v=1736268224
FIDDLE BLOCK WITH SWIVEL
FIDDLE BLOCK W/SWIVEL
Use this economical medium fiddle block with cleat and becket for 4:1 righting aids. 3/16 to 3/8" line capacity.
https://murrays.com/products/fin-belt-by-murrays
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/11-1001-Fin-Belt.jpg?v=1676949732
FIN BELT BY MURRAYS
Fin Belt By Murrays
Murrays Part# 011-1001
Securing your fins at your waist gives you the edge during dynamic water conditions. The Murrays Fin Belt holds fins within reach. Just unclip the quick release buckle and go. Water rescue personnel find these fin belts invaluable for surf and swift water operations. The fully adjustable belt is also a handy place to carry your knife horizontally so that it doesn't get in the way, a feature favored by search and rescue personnel.
https://murrays.com/products/fiddle-block-with-cleat-and-becket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/fiddlewithbecket.jpg?v=1736272083
FIDDLE BLOCK WITH CLEAT & BECKET
FIDDLE BLOCK W/CLEAT BECKET
Use this economical medium fiddle block with swivel for boom vangs and righting aids.
3/16 to 3/8" line capacity.
https://murrays.com/products/folding-anchor-3-5-lb
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/24-2311.jpg?v=1676949735
WEST MARINE FOLDING ANCHOR 3.5 LB
Folding Anchor 3.5 LB
Murrays Part# 24-2311
Collapsible anchor is constructed of corrosion-resistant galvanized iron and conveniently fits through a 4" port hole. Weighs 3.5 lb.
https://murrays.com/products/folding-anchor-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-6051.jpg?v=1676949736
FOLDING ANCHOR KIT
Folding Anchor Kit
Murrays Part# 001-6051
The convenient 7"x17" zippered pouch holds a 3.5-lb. folding anchor with chain and 50 feet of polypropylene line. Clip the pouch in a convenient location or stow the kit in an access port.
https://murrays.com/products/footstrap-inserts-with-screws
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-9518.jpg?v=1676949739
FOOTSTRAP INSERT WITH SCREWS (PR)
Footstrap Inserts with Screws
Murrays Part# 001-9518
Includes two footstrap inserts, four screws and four washers.
Sold as a pair
https://murrays.com/products/gel-coat-repair-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1601.jpg?v=1676949739
GEL COAT REPAIR KIT
Gel Coat Repair Kit
Murrays Part# 007-1601
Evercoat's handy Marine Match 'n Match Gel Coat Repair Kit permanently repairs nicks, gouges and scratches in fiberglass hulls and decks. Blends hundreds of color combinations and cures glass-hard in one hour.
https://murrays.com/products/footstrap-insert-only
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-9514.jpg?v=1676949740
1" FOOTSTRAP INSERT (EA)
Footstrap Insert 1"
This 1" footstrap insert is the best choice for custom fiberglass or epoxy skinned boards. Use #10 screw (#19-3211) and washer (#19-4011). Also available as a kit (#01-9518) that includes pair of inserts with fasteners.
Sold individually
https://murrays.com/products/getaway-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-0915-22.jpg?v=1742494270
GETAWAY BRIDLE 5/32" BLACK WIRE
Hobie Getaway Bridle 5/32" Black Wire
Murrays Part# 002-0915-22
One black bridle for Hobie® Getaway is constructed to factory specifications. We recommend ordering two to ensure equal lengths.
Compare to Hobie Part# 37822011
https://murrays.com/products/getaway-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS.jpg?v=1676949743
GETAWAY FORESTAY 5/32" BLACK WIRE
Getaway Forestay 5/32" Black Wire
Murrays Part# 002-0945-12
The Hobie Getaway forestay is made with 5/32" black vinyl coated type 316 stainless steel wire and fittings. This forestay is compatible with all generations of Hobie Getaways.
Compare to Hobie Cat Part# 37810001
https://murrays.com/products/hobie-getaway-main-halyard-comptip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-0973-60_HOBIE_GETAWAY_HALYARD.jpg?v=1771523969
GETAWAY MAIN HALYARD
Getaway Main Halyard
Murrays Part# 002-0973-60
The Murrays Hobie Getaway main halyard for is constructed to the current factory specs. It has a long rope section and a shorter wire section with a stopper and halyard shackle. The rope section is easy on the hands and prevents electrical current from traveling down the mast in the event of an electrical wire contact.
Compare to Hobie part number 37651001
https://murrays.com/products/getaway-shroud-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0905-02.jpg?v=1676949747
GETAWAY SHROUD 5/32" BLACK WIRE
Getaway Shroud 5/32" Black Wire
Murrays Part# 002-0905-02
Single black shroud (sidestay) for Hobie® Getaway is constructed to factory specifications.
Compare to Hobie Cat® Part# 37790001
https://murrays.com/products/getaway-trapeze-wires-black-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Black_Single_Trap_397d1627-4de2-41fb-80ee-0dde1cd6cc94.jpg?v=1722283153
GETAWAY TRAPEZE BLACK WIRE (2)
Getaway Trapeze Wire (2 Handles)
Murrays Part# 002-0953-02
The Murrays Getaway Trapeze is a set of 2 black or white coated trap wires with 2 handles for trapezing. Order shock cord, harness loops and adjustment kits separately.
https://murrays.com/products/h14-h16-aluminum-rudder-pins-w-rudder-tite-bushings-pr
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-2283_Hobie_rudder_pins_with_bushings.jpg?v=1744840876
H-14/16 RUDDER PINS WITH BUSHINGS
RUDDER PINS W/BUSHINGS H14/16
Aluminum rudder pins for a Hobie 14 and 16. Includes cotter pins and 4 rudder bushings.
Hobie part numbers: 20880001 and 8062001
https://murrays.com/products/gudgeon-lower-h14-h16-h17-all-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3352.jpg?v=1676949750
H-14/16/17/18 LOWER GUDGEON
H14/16/17/18 Gudgeon Lower
Murrays Part# 25-3352
The latest, strongest rudder gudgeon design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14, 16 and 17, order separate upper and lower gudgeons. For all other Hobie® cats with new-style castings, post 1986, order 4 for a complete set .
Replacement for Hobie Part# 50101401
https://murrays.com/products/h14-main-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/HOBIE_14_MAIN_HALYARD_W_SHACKLE_Main_halyard_with_shackle_for_Hobie_14_with_all-aluminum_mast_no_CompTip_is_constructed_to_factory_specifications._A_main_halyard_is_used_to_raise_the_main_sail._Compare_to_Hobie_Cat_10651001.jpg?v=1732140154
H-14 MAIN HALYARD WITH SHACKLE
HOBIE 14 MAIN HALYARD W/SHACKLE
Main halyard with shackle for Hobie 14 with all-aluminum mast (no CompTip) is constructed to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie Cat® #10651001
https://murrays.com/products/h14-main-halyard-comptip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/HOBIE_14_MAIN_HALYARD.jpg?v=1732140094
H-14 MAIN HALYARD COMPTIP
HOBIE 14 MAIN HALYARD COMPTIP
This main halyard is used to raise the main sail on a Hobie® 14 with CompTip on its mast. Constructed to factory specifications. Compare to Hobie Cat® #10657001.
https://murrays.com/products/h16-aussie-pigtail-assembly
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-3300-00.jpg?v=1676949758
H-16 AUSSIE PIGTAIL ASSY
H16 Aussie Pigtail Assy
Replacement 5/32" pigtail for Aussie jib halyard kit for Hobie® 16 (#01-3302)
https://murrays.com/products/h14-turbo-upper-forestay-with-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0134-0.jpg?v=1676949759
H-14 TURBO UPPER FORESTAY WITH SWIVEL
H14 Turbo Upper Forestay with Swivel
Murrays Part# 002-0134-01
Upper forestay with swivel for Hobie® 14 Turbo is constructed to factory specifications.
Turbo refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tramp jib block wire.
Compare to Hobie Cat® #10810010
https://murrays.com/products/h14-turbo-jib-block-wire
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0124-80.jpg?v=1676949760
H-14 TURBO JIB BLOCK BLACK WIRE
H14 Turbo Jib Block Wire
Murrays Part# 002-0124-80
Jib block wire for Hobie® 14 Turbo is constructed to factory specifications.
Older under tramp version: requires grommets in the trampoline for jib blocks to connect to the Jib block wire thru the trampoline. And also requires a Hobie 14 shroud tang at the base of the shrouds to connect to.
Turbo typically refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tram
https://murrays.com/products/h16-jib-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0284-00.jpg?v=1676949764
H-16 JIB HALYARD WITH SHACKLE
H16 Jib Halyard with Shackle
Murrays Part# 002-0284-00
Jib halyard with shackle for Hobie 16 is constructed to factory specifications.
This is for use on the classic style H16 jib halyard system with a metal sheave up near the mast tang that was standard in the 70s and 80s.
The rope section of the jib halyard is 20' of 3/16ths line.
Compare to Hobie Part# 20661001
https://murrays.com/products/hobie-16-main-halyard-comptip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/hobie_16_main_halyard_20617001.jpg?v=1771523344
H-16 MAIN HALYARD COMPTIP
The Hobie 16 main halyard comptip is used to raise the main sail on a Hobie 16 with a comptip on the mast. The main halyard comptip features a long rope section connected to a shorter wire section with a stopper and halyard shackle with a captured pin. The shackle connects to the head of the main sail and the stopper hooks into the main halyard hook and holds the sail up.
Comptip masts are stock on all Hobie 16s since 1986. A comptip is the 10' fiberglass upper mast section of the mast 20617001
https://murrays.com/products/h16-main-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie_16_main_halyard_20651011.jpg?v=1758125278
H-16 MAIN HALYARD NON-COMPTIP
Hobie 16 main halyard for all aluminum masts. Hobie part number 20651011
https://murrays.com/products/h16-jib-traveler-upgrade-kit
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/gooseneck-bearing-kit-h14-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-2050-1-rotated.jpg?v=1676949781
H-14/16 GOOSENECK BEARING KIT
Hobie 16 gooseneck bearing kit. Tren Tec. Murrays Marine. Hobie Cat part number #1511
https://murrays.com/products/h16-upper-forestay-5-32-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-0235-00.jpg?v=1721238703
H-16 UPPER FORESTAY 5/32" BARE WIRE
H-16 UPPER FORESTAY 5/32 BARE
Murrays PN 002-0235-00
Upper forestay for The Hobie® 16 is constructed of 7x19 - 5/32" bare wire to factory specifications. Compare to Hobie Cat® #20810011.
This part is used as part of the classic halyard/ forestay configuration and it holds the stainless pulley that the jib halyard cable attaches to.
This will also work to hold your Aussie halyard block assembly.
https://murrays.com/products/h17-bridle-crossbar-assembly
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1350.jpg?v=1676949776
H-17 BRIDLE CROSSBAR ASSEMBLY
https://murrays.com/products/h17-shroud-5-32-roller-swaged-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_a4ddcf50-937e-45df-8367-3aa363fb2edf.jpg?v=1676949779
H-17 SHROUD 5/32" WIRE ROLLER SWAGED
H17 Shroud 5/32 Roller Swedge
Murrays Part# 002-0305-12
This is our strongest Shroud for the Hobie 17. If you have a Hobie 17 Sport or Hobie 17 Super kit or other setup that has a jib on the front, you need these.
Heavy duty 5/32" single black shroud (sidestay) for Hobie 17 or Hobie 17 Sport is hydraulically swaged with a thimble and marine eye for a cleaner, stronger shroud.
https://murrays.com/products/h17-sport-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS.jpg?v=1676949780
H-17 SPORT BRIDLE 5/32" BLACK WIRE
H-17 SPORT BRIDLE 5/32 BK
Murrays PN 002-0315-22
One bridle for the Hobie® 17 Sport (with jib) is constructed of black-coated, 5/32" 1x19 to factory specifications.
Compare to Hobie 52500201.
https://murrays.com/products/h16-trampoline-mesh-3-piece
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-3102-1.jpg?v=1676949786
H-16 3-PIECE MESH TRAMPOLINE-BLACK
https://murrays.com/products/h17-sport-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0445-32.jpg?v=1676949783
H-17 SPORT FORESTAY 5/32-BLACK WIRE
H17 Sport Forestay 5/32"
Murrays Part# 002-0345-32
Black forestay for Hobie® 17 Sport is constructed to factory specifications.
Compare to Hobie Part# 52812001
https://murrays.com/products/h17-sport-jib-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0486-00.jpg?v=1676949784
H-17 SPORT JIB HALYARD WITH SHACKLE
Hobie 17 Sport Jib Halyard with Shackle - 52661001
Murrays Part# 002-0386-00
Jib halyard with shackle for Hobie 17 Sport is constructed to factory specifications.
Compare to Hobie Part# 52661001
https://murrays.com/products/h17-sport-upper-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/UpForestaySwiv.jpg?v=1676949787
H-17S UPPER FORESTAY 5/32" BLACK WIRE
H17 Sport Upper Forestay 5/32" Black Wire
Murrays Part# 002-0335-02
Black upper forestay for Hobie® 17 Sport is constructed to factory specifications.
Compare to Hobie Part# 52812011
https://murrays.com/products/h18-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie_18_Bridle_wire.jpg?v=1727454715
H-18 BRIDLE 5/32" BLACK WIRE
Hobie 18 Bridle wire - Hobie part number #60820001 white or #60822001 black.
https://murrays.com/products/h18-h21sc-diamond-wire-without-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0494-20.jpg?v=1676949790
H-18 DIAMOND WITHOUT TURNBUCKLE
H18 Dimond Wire without Turnbuckle
Murrays Part# 002-0494-20
Diamond wire for one side of a Hobie® 18 is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included.
Please note: The diamond wire will be constructed with a stud that has left hand threads. Please contact Murrays if you have an older Hobie® 18, as right hand threads may be required.
The change to the left handed thread happened some time in the early 80's.
https://murrays.com/products/h18-h21sc-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0445-32_b014efca-2652-4c1b-814f-307c5eff29ee.jpg?v=1676949791
H-18/21SC FORESTAY 5/32" WIRE
Hobie 18 forestay - Hobie part number 60810021 white or 60812021 black
https://murrays.com/products/h18-h21sc-jib-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0486-00_b88acbe0-c3af-4ec6-bb8a-8d0b0a67e437.jpg?v=1676949792
H-18/21SC JIB HALYARD WITH SHACKLE
H-18/21 Sport Cruiser Jib Halyard with Shackle
Murrays Part# 002-0486-00
Jib halyard with shackle for H18/21 Sport Cruiser is constructed to factory specifications.
Please note that the H21SC is differentiated by its 8.5' beam, front trampoline and Hobie® 18 rigging.
Order Jib Halyard line separately:
20' of 1/8" line Murrays Part# 39-0221
https://murrays.com/products/h18-h21sc-upper-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0435-02.jpg?v=1676949794
H-18/21SC UPPER FORESTAY 5/32" WIRE
https://murrays.com/products/h18sx-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_88dba64a-cc43-4140-aa13-e26bb5d9595e.jpg?v=1676949795
H-18SX BRIDLE 5/32" BLACK WIRE
H18SX Bridle 5/32" Black Wire
Murrays Part# 002-0615-22
Single black bridle for Hobie® 18SX is constructed of 5/32" wire to factory specifications.
Compare to Hobie Cat® Part# 60822001 Black or 60820001 White
https://murrays.com/products/h18sx-diamond-wire-without-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0494-20_1777d424-618f-4347-85c9-1e6c22e1a8bd.jpg?v=1676949796
H-18SX DIAMOND WIRE WITHOUT TURNBUCKLE
H18SX Diamond Wire without Turnbuckle
Murrays Part# 002-0694-20
Diamond wire for Hobie® 18SX is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included.
Compare to Hobie Cat® Part# 68750001
https://murrays.com/products/h18sx-jib-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0486-00_6ec2d011-d2d2-44e5-b034-60523263877a.jpg?v=1676949796
H-18SX JIB HALYARD WITH SHACKLE
H18SX Jib Halyard with Shackle
Murrays Part# 002-0686-00
Jib halyard with shackle for Hobie® 18SX is constructed to factory specifications.;
Use 20' of 1/8" line to to complete your jib halyard or our jib halyard kit with sister clips. links below in related items.
Compare to Hobie Cat® Part# 68661001
https://murrays.com/products/h18sx-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0445-32_d3b18288-37a1-49f6-bcdb-281b313893d0.jpg?v=1676949799
H-18SX FORESTAY 5/32" BLACK WIRE
H18SX Forestay 5/32" Black Wire
Murrays Part# 002-0645-12
Black forestay for Hobie® 18SX is constructed to factory specifications.
Compare to Hobie Cat® Part# 68814501
https://murrays.com/products/h18sx-shroud-5-32-black-roller-swaged
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_d8da7e32-308c-48a1-9dce-477f9d3f79a6.jpg?v=1676949799
H-18SX SHROUD 5/32" BLACK WIRE ROLLER SWAGED
H-18SX Shroud Roller Swaged 5/32" Black Wire
Murrays Part# 002-0605-12
Single black shroud (sidestay) for Hobie® 18SX is hydraulically swaged for extra strength and a cleaner connection. Constructed to factory specifications.
Compare to Hobie Cat® Part# 68793501
https://murrays.com/products/h20-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_fc96f093-bd43-4d92-82f2-df5f0fbea3cb.jpg?v=1676949800
H-20 BRIDLE 5/32" BLACK WIRE
H20 Bridle 5/32" Black Wire
Murrays Part# 002-0715-22
One bridle for Hobie® 20 is constructed to factory specifications.
Compare to Hobie Cat® Part# 40822001
https://murrays.com/products/h18sx-upper-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/UpForestaySwiv_fdb73add-8f49-4b17-94eb-6e6ae8a50fba.jpg?v=1676949802
H-18SX UPPER FORESTAY 5/32" BLACK WIRE
H18SX Upper Forestay 5/32" Black Wire
Murrays Part# 002-0635-02
Black upper forestay for Hobie® 18SX is constructed to factory specifications.
Compare to Hobie Cat® Part# 68813501
https://murrays.com/products/h20-diamond-wire-double-without-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0795-20.jpg?v=1676949802
H-20 DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE
H20 Diamond Wire Double without Turnbuckle
Murrays Part# 002-0795-20
Diamond wire double (includes both sides) for Hobie® 20 is constructed to factory specifications. Without turnbuckle.
Compare to Hobie Cat® Part# 41750001
https://murrays.com/products/h20-forestay-5-32-black-with-5-16-stud
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0745-82.jpg?v=1676949804
H-20 FORESTAY 5/32" BLACK WIRE WITH 5/16" STUD
H20 Forestay 5/32" Black Wire with 5/16 Stud
Murrays Part# 002-0745-82
Lower forestay with 5/16" stud for Hobie® 20 is constructed to factory specifications.
Compare to Hobie Cat® Part# 40822121
https://murrays.com/products/h20-forestay-roller-furling-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0445-32_ac4240cb-802c-4ba5-b5f8-1f3b58eac0c1.jpg?v=1676949805
H-20 FORESTAY ROLLER FURLING 5/32" BLACK WIRE
H20 Forestay Roller Furling 5/32" Black Wire
Murrays Part# 002-0745-32
Lower forestay for Hobie® 20 with roller furling setup. Constructed to factory specifications.
Compare to Hobie Cat® Part# 48814001
https://murrays.com/products/h20-jib-block-wire-barberhauler
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Murrays_final_navy.png?v=1732639620
H-20 JIB BLOCK WIRE (BARBERHLR)
https://murrays.com/products/h20-jib-halyard-roller-furling
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0786-00.jpg?v=1676949808
H-20 JIB HALYARD ROLLER FURLING
H20 Jib Halyard Roller Furling
Murrays Part# 002-0786-00
Jib halyard for Hobie® 20 with roller furling is constructed to factory specifications. Order 24' of #39-0221 1/8" Dacron line for jib halyard line.
Compare to Hobie Cat® Part# 48661001
https://murrays.com/products/h20-jib-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/H-20-jib-halyard.jpg?v=1676949808
H-20 JIB HALYARD WITH SHACKLE
H20 Jib Halyard with Shackle
Murrays Part# 002-0783-50
Jib halyard with shackle for Hobie® 20 is constructed to factory specifications.
Compare to Hobie Cat® Part# 41661001
https://murrays.com/products/h20-shroud-5-32-black-roller-swaged
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_36f896df-7337-4136-8870-182d44e16a52.jpg?v=1676949808
H-20 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
H20 Shroud 5/32" Black Wire Roller Swaged
Murrays Part# 002-0705-12
Single shroud (sidestay) for Hobie® 20 is constructed to factory specifications. Hydraulic swaging produces a cleaner, stronger shroud than standard double swaging.
Compare to Hobie Cat® Part# 40792001
https://murrays.com/products/h20-upper-forestay-5-32-black-for-roller-furling
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-0735-02.jpg?v=1740594273
H-20 UPPER FORESTAY 5/32" BLACK WIRE WITH ROLLER FURLING
https://murrays.com/products/h21sc-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_fa48c27c-62f2-4254-bdfc-f41e652cc8b2.jpg?v=1676949812
H-21SC BRIDLE 5/32" WIRE
H21 Sport Cruiser Bridle 5/32" Wire
Murrays Part# 002-0514-22
One bridle for Hobie® 21SC is constructed of 5/32" wire to factory specifications. Wire has black coating.
The H21SC is sometimes confused with the H21SE (Special Edition). Please note that the H21SC is differentiated by its 8.5' beam, front trampoline and Hobie® 18 rigging.
https://murrays.com/products/h21se-diamond-wire-without-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0494-20_2d9a0f2a-2c3c-4678-a2ae-e3b67a6c1a53.jpg?v=1676949812
H-21SE DIAMOND WIRE WITHOUT TURNBUCKLE
H21 Special Edition Diamond Wire without Turnbuckle
Murrays Part# 002-0595-20
Diamond wire without turnbuckle for Hobie® 21SE (Special Edition) is constructed to factory specifications.
The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.
https://murrays.com/products/h21se-shroud-5-32-roller-swaged-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_34bffe59-97b5-4110-baf1-47b7c6a347a8.jpg?v=1676949816
H-21SE SHROUD 5/32" BLACK WIRE ROLLER SWAGED
H21 Special Edition Shroud 5/32" Black Wire Roller Swaged
Murrays Part# 002-0505-12
Single shroud (sidestay) for Hobie® 21 Special Edition has hydraulically swaged fittings for a cleaner, stronger shroud. It is constructed to factory specifications.
The H21SE is sometimes confused with the H21SC (Sport Cruiser).
Note: The H21SE is differentiated by its 10' beam and lack of a front trampoline.
https://murrays.com/products/h21se-forestay-5-32
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0445-32_72dee551-4d64-49e0-bd9e-97440ebeac00.jpg?v=1676949816
H-21SE FORESTAY 5/32" BLACK WIRE
H21SE Forestay 5/32" Wire
Murrays Part# 002-0545-32
Forestay for Hobie® 21SE (Special Edition) is constructed to factory specifications.
The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.
https://murrays.com/products/h21se-upper-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/UpForestaySwiv_5cf4ad18-f211-46bb-b41d-7165f9480e7e.jpg?v=1676949816
H-21SE UPPER FORESTAY 5/32" BLACK WIRE
H21SE Upper Forestay 5/32" Wire
Murrays Part# 002-0535-02
Black upper forestay for Hobie® 21 Special Edition is constructed to factory specifications.
The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.
https://murrays.com/products/h21se-jib-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0486-00_f6397479-fd4a-4971-b881-647d98e972c5.jpg?v=1676949818
H-21SE JIB HALYARD WITH SHACKLE
H21 Special Edition Jib Halyard with Shackle
Murrays Part# 002-0586-00
Jib halyard with shackle for Hobie® 21SE (Special Edition) is constructed to factory specifications.
The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.
https://murrays.com/products/halyard-cleat-kit-with-rivets
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1019-Murrays-hobie-halyard-mast-cleat.jpg?v=1676949820
HALYARD CLEAT KIT WITH RIVETS
Halyard Cleat Kit with Rivets
Murrays Part# 001-1019
The Murrays Halyard Cleat Kit with Rivets pulls the halyard out of the way to keep the battens from hanging up on the halyard of an H16. The kit includes the halyard cleat and sealed stainless rivets. Center-to-center hole spacing is 31mm. *Photo is out of date and kit no longer comes with casings as the rivets that are included come sealed. Compare to Hobie Cat Part 10730000
https://murrays.com/products/harken-468-micro-cam-matic-cleat-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0468.jpg?v=1676949820
HARKEN MICRO CAM-MATIC CLEAT
Harken Micro Cam-Matic Cleat
Murrays Part# 28-0468
Harken's Cam-Matic cleat has multiple rows of high-load ball bearings to reduce friction so that cams open easily for snap-down, rather than draw-through cleating. The cam horns and smooth V-shape guide line for easy entry. This allows precise sail control without having to readjust the cleated line.
https://murrays.com/products/halyard-grip-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1140.jpg?v=1676949820
HOBIE HALYARD GRIP KIT
HOBIE HALYARD GRIP KIT
The Hobie Halyard grip kit is a mast hook that hold the jib halyard off center on the mast so that the jib battens don't hang up on the jib halyard when tacking. Mostly used on the Hobie 16.
Hobie part number 114
https://murrays.com/products/hand-winch-3-1-900-lb-capacity
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/13-9272.jpg?v=1676949822
HAND WINCH 3:1
https://murrays.com/products/halyard-shackle-with-twist-pin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-1032_3_16_Ronstan_halyard_shackle_RF1032.webp?v=1751474417
RONSTAN HALYARD SHACKLE, 3/16" PIN
Ronstan Halyard Shackle, 1/4" Pin
Murrays Part# 21-1033
The Ronstan Halyard Shackle with Twist Pin's main advantage is that you cant loose any of it once its attached. The top pin holds it on and the bottom pin dose not come out. Never loose your shackle pins again!
The 1/4" Halyard Shackle with Twist Pin is used in the following Murrays Products: 02-4383-50 N-5.5SL Jib Halyard w/Shackle
https://murrays.com/products/harken-22mm-traveler-track-self-tacking-1-2m
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2720_eaddbecc-e057-4b73-ab90-74e02e007ffd.jpg?v=1676949826
HARKEN 22MM HIGH-BEAM TRACK
Harken 22mm High-Beam Track
Murrays Part# 28-2725-120
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface.
https://murrays.com/products/harken-57mm-carbo-ratchamatic-7-1-low-profile-mainsheet-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/H18mainsheet.jpg?v=1740506835
HARKEN 57MM CARBO RATCHAMATIC 7:1 LOW-PROFILE MAINSHEET SYSTEM
https://murrays.com/products/harken-57mm-carbo-10-1-low-profile-mainsheet-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/10-1Mainsheet.jpg?v=1740506744
HARKEN 57mm CARBO 10:1 SYSTEM
https://murrays.com/products/harken-57mm-carbo-ratchamatic-12-1-low-profile-mainsheet-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-121.jpg?v=1676949828
HARKEN 57mm CARBO 12:1 SYSTEM
Harken 57mm Carbo Ratchamatic 12:1 Low-Profile Mainsheet System
Murrays Part# 28-121
The Harken 57mm Carbo Ratchamatic 12:1 Low-Profile Mainsheet System is a Light weight, low profile and very strong. These Carbo AirBlocks® have enormous working range, with a higher working load than standard blocks, even though they are lighter in weight! The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase.
https://murrays.com/products/harken-57mm-jib-block-with-ratchet-with-swivel-becket-cam-cleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2139.jpg?v=1676949832
HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat
Murrays Part# 28-2139
Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.
Specifications
Sheave diameter: 2-1/4"
Length: 4-15/16"
Weight: 9 oz
Shackle pin diameter: 3/16"
Maximum line diameter: 3/8"
Maximum working load: 600 lb.
Breaking load: 1500 lb.
https://murrays.com/products/harken-57mm-carbo-ratchamatic-8-1-low-profile-mainsheet-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8-1_carbo-reeving-diagram-lg.jpg?v=1676949832
HARKEN 57mm CARBO 8:1 SYSTEM
Harken 57mm Carbo 8:1 System
Murrays Part# 28-81
Lightweight, low profile and very strong, these Carbo AirBlocks® have enormous working range, with a higher working load than standard blocks, even though they are lighter in weight! The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase.
https://murrays.com/products/harken-57mm-carbo-side-cover
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2653.jpg?v=1676949832
HARKEN CAM ARM COVER LEFT 57MM WITH NUT
Harken Cam Arm Cover Left 57mm with Nut
Murrays Part# 28-2653
One Harken replacement right or left 57mm side cover washer for #28-2629 Carbo Ratchamatic base block.
#28-2652 Right cam arm washer 57mm is Harken #H-26521B.
#28-2653 Left cam arm cover 57mm with nut is Harken #HSB524.
https://murrays.com/products/harken-airblock-16mm-cheek
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0416.jpg?v=1676949834
HARKEN 16MM CHEEK BLOCK
Harken 16mm Cheek Block
Murrays Part# 28-0416
Harken's 16mm check block is a downhaul and turning block and is perfect for small synthetic control lines. 1-13/16" long; 5/8" sheave diameter; 250 lb. SWL; 1200 lb. breaking strength. Use #8 (4mm) RH fasteners.
Harken Part# 416
https://murrays.com/products/harken-airblock-16mm-single
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0404.jpg?v=1676949836
HARKEN 16MM SINGLE
Harken 16mm Single
Murrays Part# 28-0404
The Harken air block offers a very high load in an extremely lightweight block. Excellent for control lines. The block itself is only 1-1/8" long. The 5/8" sheave will accept line as large as 7/32". 250 lb. SWL; 1200 lb. breaking strength.
https://murrays.com/products/harken-airblock-16mm-single-with-becket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0405.jpg?v=1676949836
HARKEN 16MM BLOCK-BECKET
Harken 16mm Block-Becket
Murrays Part# 28-0405
The Harken air block offers a very high load in an extremely lightweight block. Excellent for control lines. The overall length is only 1-1/2" long. The 5/8" sheave will accept line as large as 7/32". 250 lb. SWL; 1200 lb. breaking strength.
The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb.
https://murrays.com/products/harken-airblock-16mm-double
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0406.jpg?v=1676949836
HARKEN 16MM DOUBLE BLOCK
Harken 16mm Double Block
Murrays Part# 28-0406
The Harken air block offers a very high load in an extremely lightweight block. Excellent for control lines. The block itself is only 1-1/8" long; overall length is 1-11/16. The 5/8" sheave will accept line as large as 7/32". 450 lb. SWL; 1200 lb. breaking strength.
The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies.
https://murrays.com/products/harken-airblock-16mm-single-with-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0417.jpg?v=1676949838
HARKEN 16MM BLOCK-SWIVEL
Harken 16mm Block-Swivel
Murrays Part# 28-0417
The Harken air block offers a very high load in an extremely lightweight block. The block itself is only 1-13/16" long. The 5/8" sheave will accept line as large as 7/32". 250 lb. SWL; 750 lb. breaking strength; 5/32" shackle pin diameter.
Harken Part# 417
https://murrays.com/products/harken-ball-bearing-delrin-1-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-hsb243.png?v=1676949839
HARKEN BALL BEARING DELRIN 1/8" (EACH)
Harken Ball Bearing Delrin 1/8"
Murrays Part# 28-HSB243
Harken 1/8" replacement Delrin ball bearings are sold individually.
https://murrays.com/products/harken-airblock-16mm-triple
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0408.jpg?v=1676949840
HARKEN 16MM TRIPLE BLOCK
Harken 16mm Triple Block
Murrays Part# 28-0408
The Harken air block offers a very high load in an extremely lightweight block. The block is only 1-13/16" long. The 5/8" sheave will accept line as large as 7/32". 700 lb. SWL; 1200 lb. breaking strength.
Harken Part# 408
https://murrays.com/products/harken-ball-bearing-sheave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0160.jpg?v=1676949840
HARKEN 29MM BULLET SHEAVE
Harken 29mm Bullet Sheave
Murrays Part# 28-0160
Harken's downhaul/halyard sheave makes raising the sail and/or adjusting the downhaul with Harken ball bearing sheaves much easier. This is a direct replacement for the sheaves that came with early Hobie 17s.
https://murrays.com/products/harken-becket-roller
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-hsb26.jpg?v=1676949842
HARKEN BECKET ROLLER
Harken Becket Roller
Murrays Part# 28-HSB26
Replacement becket roller for Harken blocks measures 3/4" long by 1/2" diameter with 1/4" hole.
https://murrays.com/products/harken-bearing-replacement-21
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0177.jpg?v=1676949843
HARKEN 1/4" TORLON BALL BEARING (21)
Harken 1/4" Torlon Ball Bearing-21 Balls
Murrays Part# 28-0177
1/4" Torlon replacement ball bearings fit Harken 158, 159, 172, 210, 212, 214, 215, 249, 440 and 441. A bearing loader, #28-HSB8 (sold separately), is required for installation.
Sold in packages of 21
https://murrays.com/products/harken-block-29mm-carbo-single-fixed
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0348.jpg?v=1676949846
HARKEN 29MM BLOCK
Harken 29mm Block
Murrays Part# 28-0348
Harken's low-friction 29mm Carbo AirBlock® is compact, lightweight and extremely strong. A companion to the popular Harken® Black Magic® line, this small, compact block has a very high working load for safe, easy trimming. This pulley is a popular addition to spinnaker systems. Harken #348.
https://murrays.com/products/harken-block-29mm-carbo-double-with-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0342.jpg?v=1676949847
HARKEN 29mm DOUBLE BLOCK-SWIVEL
Harken 29mm Double Block - Swivel
Murrays Part# 28-0342
This compact double block is extremely strong and features a U-Lock to hold the swivel in front/side position, or to let it spin freely. Use this miniature Carbo as a mainsheet block on small dinghies such as the Optimist, to increase downhaul, or for low-friction control blocks on any size boat.
https://murrays.com/products/harken-block-29mm-carbo-single-with-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0340.jpg?v=1676949848
HARKEN 29MM BLOCK-SWIVEL
Harken 29mm Block - Swivel
Murrays Part# 28-0340
Harken's compact 29mm Carbo block is extremely strong. Use as a mainsheet block on small boats or for low-friction control block on any size boat.
Specifications:
330 lb. SWL
1000 lb. breaking strength
5/16" maximum line diameter
5/32" shackle pin diameter
2-5/8" long
Weight with shackle .9 oz.
Harken Part# 340
https://murrays.com/products/harken-block-29mm-carbo-triple-with-carbo-cam-becket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0347.jpg?v=1676949849
HARKEN 29MM TRIPLE BLOCK- BECKET, CAM CLEAT
Harken 29mm Triple Block -Becket, Cam Cleat
Murrays Part# 28-0347
Harken's 29mm Carbo block is compact and extremely strong. This triple features U-Locks to hold the swivel in front/side position, or to let it spin freely. The compact cam arm supports high-load purchases of 5:1 or 6:1.
Specifications:
990 lb. SWL
2000 lb. breaking strength
5/16" maximum line diameter
3/16" shackle pin diameter
3-3/8" long
Harken Part# 347
https://murrays.com/products/harken-block-40mm-carbo-fiddle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2655.jpg?v=1676949849
HARKEN 40MM FIDDLE BLOCK-SWIVEL
Harken 40mm Fiddle Block - Swivel
Murrays Part# 28-2655
Harken's Carbo fiddle block features high-load ball bearings with fitted races for low-friction operation. The 40 mm fiddle is an excellent choice for a Hobie® 20 barber hauler block, for 3:1 and 4:1 tackles on dinghy vangs and mainsheets, as well as for controls such as cunninghams and internal boom outhauls on larger boats.
https://murrays.com/products/harken-block-29mm-carbo-triple-with-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0344.jpg?v=1676949851
HARKEN 29MM TRIPLE BLOCK-SWIVEL
Harken 344 Harken’s compact 29mm Carbo block is extremely strong. This block features a U-lock to hold the swivel in front/side position, or to let it spin freely. The triple’s compact cam arm supports high-load purchases of 5:1 or 6:1. Specifications: 990 lb. SWL 2000 lb. breaking strength 5/16" maximum line diameter 3/16" shackle pin diameter 2-7/8" long Harken #344.
https://murrays.com/products/harken-block-40mm-carbo-fixed-90-degree-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2659.jpg?v=1676949851
HARKEN 40MM 90° BLOCK
Harken 40mm 90° Block
Murrays Part# 28-2659
Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
Harken Part# 2659
https://murrays.com/products/harken-block-40mm-carbo-single
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2636.jpg?v=1676949853
HARKEN 40MM BLOCK-SWIVEL
Harken 40mm Block - Swivel
Murrays Part# 28-2636
Carbo AirBlocks® are 60% stronger and 30% lighter than Harken's classic blocks. Use the 40mm Carbo for jib and mainsheet systems on high-performance dinghies and for loaded control lines on small keelboats.
https://murrays.com/products/harken-block-40mm-carbo-triple-with-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2640.jpg?v=1676949854
HARKEN 40MM TRIPLE BLOCK SWIVEL
Harken 40mm Triple Block - Swivel
Murrays Part# 28-2640
Low-friction Carbo AirBlocks® are lightweight, strong, reliable and affordable. These small, compact blocks have very high working loads for safe, easy trimming.
This is a fantastic block for a performance AND economical H16 mainsheet system top block. Use it with a 57mm base block for 6:1 performance system.
https://murrays.com/products/harken-block-57mm-carbo-boom-6-sheave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-10925.jpg?v=1676949855
HARKEN 57MM CARBO BOOM BLOCK 6-SHEAVE
Harken 57mm Carbo Boom Block
6-Sheave
Murrays Part# 28-10925
Harken 57mm Carbo Blocks have an enormous working range and a very high strength-to-weight ratio. This 57mm Carbo boom block has 6 sheaves. A swivel keeps the boom block aligned with your base block.
https://murrays.com/products/harken-block-57mm-carbo-double-with-ratchamatic-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2634.jpg?v=1676949855
HARKEN 57MM DOUBLE RATCHAMATIC BLOCK-SWIVEL
Harken 57mm Double Ratchamatic Block-Swivel
Murrays Part# 28-2634
The 57mm Harken Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
https://murrays.com/products/harken-block-57mm-carbo-quad
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2631.jpg?v=1676949857
HARKEN 57MM QUAD BLOCK-SWIVEL
Harken 57mm Quad Block-Swivel
Murrays Part# 28-2631
57mm Carbo Blocks have an enormous working range and a very high strength-to-weight ratio.
Use with #28-2632 base block for an 8:1 Carbo low-profile mainsheet system.
https://murrays.com/products/harken-block-57mm-single-carbo-ratchamatic
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2625.jpg?v=1676949858
HARKEN 57mm SINGLE CARBO RATCHAMATIC BLOCK
Harken 57mm Single Carbo Ratchamatic Block
Murrays Part# 28-2625
Under low loads, this lightweight, high strength Harken 2-1/4" ratchet block rolls freely in both directions like a non-ratcheting block, but automatically engages the ratchet mechanism as loads increase, giving sailors an additional holding power of 10:1.
Specifications:
500 lb. SWL
2000 lb. breaking strength
3/8" maximum line diameter
2-1/4" sheave diameter
4-1/16" long
Weighs 3.7 oz.
3/16" shackle pin diameter
Harken Part# 2625
https://murrays.com/products/harken-block-57mm-carbo-triple-with-swivel-becket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2605.jpg?v=1676949859
HARKEN 57MM TRIPLE BLOCK-SWIVEL, BECKET
Harken 57mm Triple Block-Swivel, Becket
Murrays Part# 28-2605
This Carbo AirBlock® has an enormous working range, with a higher working load than standard blocks, even though it is lighter in weight!
This is a fantastic option for the top block for a 7:1 mainsheet system, such as an Hobie 18 catamaran or Hobie Miracle 20 catamaran.
https://murrays.com/products/harken-block-57mm-carbo-triple-with-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2604.jpg?v=1676949859
HARKEN 57MM TRIPLE BLOCK-SWIVEL
Harken 57mm Triple Block-Swivel
Murrays Part# 28-2604
Harken's low-friction Carbo AirBlock® is lightweight, strong, reliable and affordable. It has an enormous working range, with a very high working load for safe, easy trimming. It has a higher working load than standard blocks, even though it is lighter in weight! Use with #28-2629 base block for a 6:1 carbo low-profile mainsheet system.
Can be used as top block for H16 6:1 mainsheet system or a light air H18 6:1 mainsheet system.
https://murrays.com/products/harken-block-6-1-carbo-ratchamatic-base
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2629.jpg?v=1676949861
HARKEN 57MM TRIPLE RATCHAMATIC BLOCK-SWIVEL, CAM CLEAT
Harken 57mm Triple Ratchamatic Block-Swivel, Cam Cleat
Murrays Part# 28-2629
The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase. Shifting between ratchet and light air modes is seamless. Unloaded the sheet runs freely during mark roundings and jibes. Ratchet engagement may be adjusted to a higher or lower load according to strength and sailing style.
https://murrays.com/products/harken-block-7-1-carbo-ratchamatic-base
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2620-7.jpg?v=1676949862
HARKEN BLOCK 7:1 CARBO RATCHAMATIC BASE
https://murrays.com/products/harken-block-8-1-carbo-ratchamatic-base
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2632.jpg?v=1676949863
HARKEN 57MM TRIPLE RATCHAMATIC BLOCK-SWIVEL, CAM CLEAT, 40MM BLOCK
Harken 57mm Triple Ratchamatic® Block-Swivel, Cam Cleat, 40 mm Block
Murrays Part# 28-2632
The Harken Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase. Shifting between ratchet and light air modes is seamless. Unloaded, the sheet runs freely during mark roundings and jibes. Ratchet engagement may be adjusted to a higher or lower load according to strength and sailing style.
https://murrays.com/products/harken-block-assembly-29mm-carbo-jib-clew
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0371.jpg?v=1676949865
HARKEN 29MM CLEW BLOCK
Harken 29mm Clew Block
Murrays Part# 28-0371
Harken's 29mm Carbo block assembly is designed to be sewn onto the clew of a sail. It can be used to replace the jib clew block on Hobie® 14 and 16. Specifications: 330 lb. SWL; 1000 lb. breaking strength; 5/16" maximum line diameter.
On Hobie® 14 and 16, attach with #21-1032 twist pin halyard shackle.
Harken Part# 371
https://murrays.com/products/harken-block-carbo-quad-with-swivel-40mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2654.jpg?v=1676949866
HARKEN 40MM QUAD BLOCK
Harken 40mm Quad Block
Murrays Part# 28-2654
Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
https://murrays.com/products/harken-block-carbo-stand-up-fixed
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0349.jpg?v=1676949867
HARKEN CARBO STANDUP FIXED 29MM
Harken 29mm Stand-up Block
Murrays Part# 56-31297
Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
Specifications:
330 lb. SWL
1000 lb. breaking strength
5/16" maximum line diameter
1-1/8" sheave diameter
2-3/16" long
Harken Part #349
Nacra Part# 31297
https://murrays.com/products/harken-block-double-2-25
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0003.jpg?v=1676949871
HARKEN 2.25" BLOCK DOUBLE
https://murrays.com/products/harken-block-double-bullet
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0084.jpg?v=1676949873
HARKEN 29MM DOUBLE BULLET BLOCK
Harken 29mm Double Bullet Block
Murrays Part# 28-0084
Medium-size Harken double bullet block has Delrin ball bearings and works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads.
https://murrays.com/products/harken-block-double-micro
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0226.jpg?v=1676949873
HARKEN BLOCK DOUBLE MICRO
Harken Block Double Micro
Murrays Part# 28-0226
Harken ball bearing micro double block with stainless side plates. Low-friction Micro blocks are compact and lightweight, making them ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes.
Specifications:
1/4" maximum line capacity
350 lb. SWL
1200 lb. breaking strength
2" long
Harken Part# 226
Hobie Part# H226S
https://murrays.com/products/harken-block-double-with-becket-2-25
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0004.jpg?v=1676949875
HARKEN 2.25" BLOCK DOUBLE WITH BECKET
Harken Block Double with Becket 2.25"
Harken PN 004
Sheave Size 57mm 2.25 Inches
Max Line Size 12MM 7/16"
Max Working Load 454kg 1000lb
Breaking Load 1361kg 3000lb
The 2.25 in (57mm) blocks are compact and lightweight, with fast trim and release under high or low loads. Perfect for dinghies, scows, beachcats and iceboats, as well as small offshore racers and cruisers.
https://murrays.com/products/harken-block-double-with-becket-bullet
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0085.jpg?v=1676949877
HARKEN 29MM DOUBLE BULLET BLOCK-BECKET
Harken 29mm Double Bullet Block-Becket
Murrays Part# 28-0085
Medium-size Harken double bullet block with becket has Delrin ball bearings and works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.
https://murrays.com/products/harken-block-micro-cheek
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0233.jpg?v=1676949877
HARKEN 22MM CHEEK BLOCK
Harken 22mm Cheek Block
Murrays Part# 28-0233
Harken micro cheek is used as a downhaul and turning block and as the Hobie 16 jib traveler control line block on the front crossbar.
Specifications:
200 lb. SWL
1200 lb. breaking strength
1/4" maximum line diameter
7/8" sheave diameter
2-1/2" long
https://murrays.com/products/harken-block-micro-swivel-22mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0292.jpg?v=1676949881
HARKEN 22MM BLOCK-SWIVEL
Harken 22mm Block-Swivel
Murrays Part# 28-0292
Low Friction Micro Blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies and lightly loaded control lines on boats of all sizes.
https://murrays.com/products/harken-block-single-2-25-hexaratchet
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0019.jpg?v=1676949881
HARKEN 2.25" HEXARATCHET BLOCK-SWIVEL, STARBOARD
Harken Block Single 2.25" Hexaratchet
Murrays Part# 28-0019
Sheave Size 57mm 2.25"
Max Line Size 10mm 3/8"
Max Working Load 227KG 500lb
Breaking Strength 907kg 2000lb
Holding Power 10:1
Hexaratchets grip loaded sheets, yet allow sailors to ease and trim quickly and with complete control. A switch on the side engages and disengages the ratchet mechanism. Use the 043 or 044 revers ratchets with the 019 or 050 single with becket on spinnaker and jib sheets where ratchets rotate in opposite directions an
https://murrays.com/products/harken-block-single-bullet
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0082.jpg?v=1676949881
HARKEN 29MM BULLET BLOCK
Harken 29mm Bullet Block
Murrays Part# 28-0082
Medium-size Harken single bullet block with Delrin® ball bearings works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads.
https://murrays.com/products/harken-block-single-3-hexaratchet
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0009.jpg?v=1676949883
HARKEN 3.00" HEXARATCHT BLOCK-SWIVEL, STARBOARD
Harken 3.00" Hexaratchet® Block-Swivel, Starboard
Murrays Part# 28-0009
Hexaratchets grip loaded sheets, yet allows sailors to ease and trim quickly and with complete control. A switch on the side engages and disengages the ratchet mechanism. Use the 043 or 044 revers ratchets with the 019 and 009 singles or 050 single with becket on spinnaker and jib sheets where ratchets rotate in opposite directions and on/off switches face up.
https://murrays.com/products/harken-block-single-bullet-wire
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0098.jpg?v=1676949885
HARKEN 29MM WIRE BULLET BLOCK
Harken 29mm Wire Bullet Block
Murrays Part# 28-0098
Low-friction bullet blocks lead control lines aft. This block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings, sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection. This wire bullet block uses roller bearings to carry higher loads and features Hardkote-anodized Teflon®-impregnated aluminum sheaves for strength and corrosion resistance.
https://murrays.com/products/harken-block-single-bullet-big-with-becket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0126.jpg?v=1676949885
HARKEN 38MM BIG BULLET BLOCK-BECKET
https://murrays.com/products/harken-block-single-bullet-big
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0125.jpg?v=1676949885
HARKEN 38MM BIG BULLET BLOCK
Harken 38mm Big Bullet Block
Murrays Part# 28-0125
Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications.
https://murrays.com/products/harken-block-single-bullet-big-with-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0168.jpg?v=1676949887
HARKEN 38MM BIG BULLET BLOCK-SWIVEL
Harken 38mm Big Bullet Block-Swivel
Murrays Part# 28-0168
Low-friction bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads.
Harken's big single bullet block with swivel has free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.
https://murrays.com/products/harken-block-single-carbo-ratchet-with-swivel-40mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2608.jpg?v=1676949888
HARKEN 40MM RATCHET BLOCK-SWIVEL
Harken 40mm Ratchet Block-Swivel
Murrays Part# 28-2608
This small ratchet with on/off switch is ideal for jib sheets and spinnakers on small dinghies where size and weight are critical. Eight-faceted machined aluminum sheave holds line securely. Hard coat anodizing provides durability.
https://murrays.com/products/harken-block-single-micro
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0224.jpg?v=1676949890
HARKEN 22MM BLOCK
Harken 22mm Block
Murrays Part# 28-0224
This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
https://murrays.com/products/harken-block-single-with-becket-bullet
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0083.jpg?v=1676949892
HARKEN 29MM BULLET BLOCK-BECKET
Harken 29mm Bullet Block-Becket
Murrays Part# 28-0083
Medium-size Harken single bullet block with becket has Delrin® ball bearings and works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.
https://murrays.com/products/harken-block-single-with-becket-micro
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0225.jpg?v=1676949892
HARKEN 22MM BECKET BLOCK
Harken 22mm Becket Block
Murrays Part# 28-0225
Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes.
Harken ball bearing micro single block with becket has stainless side plates.
https://murrays.com/products/harken-block-single-with-swivel-becket-bullet
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0167.jpg?v=1676949894
HARKEN 29MM BULLET BLOCK-SWIVEL, BECKET
Harken 29mm Bullet Block-Swivel, Becket
Murrays Part# 28-0167
Medium-size Harken single bullet block with swivel and becket has Delrin ball bearings. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.
https://murrays.com/products/harken-block-single-with-swivel-bullet
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0166.jpg?v=1676949896
HARKEN 29MM BULLET BLOCK-SWIVEL
Harken 29mm Bullet Block - Swivel
Murrays Part# 28-0166
Medium-size Harken double bullet block with swivel has Delrin ball bearings. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection.
https://murrays.com/products/harken-block-triple-micro
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0228.jpg?v=1676949896
HARKEN TRIPLE MICRO BLOCK
Harken Triple Micro Block
Murrays Part# 28-0228
Harken 22mm ball bearing micro triple block with stainless side plates.
Specifications:
1/4" maximum line capacity
500 lb. SWL
1200 lb. breaking strength
7/8" sheave
2" long
Harken Part# 228
Hobie part# H228
https://murrays.com/products/harken-block-triple-with-becket-cam-micro
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0231.jpg?v=1676949897
HARKEN 22MM TRIPLE BECKET BLOCK-CAM CLEAT
Harken 22mm Triple Becket Block-Cam Cleat
Murrays Part# 28-0231
Harken ball bearing micro triple block with becket and cam has free-rolling Delrin® ball bearings. Sheaves are UV-stabilized with carbon-black additive for maximum protection. Stainless steel side plates give strength. Harken's low-friction micro blocks are compact and lightweight, with fast trim and release under high or low loads.
https://murrays.com/products/harken-block-wire-swivel-bullet-29mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0183.jpg?v=1676949898
HARKEN 29MM WIRE BULLET BLOCK-SWIVEL
Harken 29mm Wire Bullet Block-Swivel
Murrays Part# 28-0183
Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control lines applications. ire Bullet blocks use roller bearings to carry higher loads and feature hardcoat-anodized PTFE impregnated aluminum sheaves for strength and corrosion resistance.
https://murrays.com/products/harken-blocks-micro-singles-linked
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0232.jpg?v=1676949900
HARKEN 22MM TRAVELER BLOCK
Harken 22mm Traveler Block
Murrays Part# 28-0232
Low-friction, back-to-back micro blocks are compact and lightweight.
Specifications:
200 lb. SWL
1200 lb. breaking strength
1/4" maximum line diameter
7/8" sheave diameter
2-3/4" long
Harken Part# 232
Hobie Cat® Part# H232
https://murrays.com/products/harken-cam-matic-cam-cleat-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0150.jpg?v=1676949900
HARKEN ALUMINUM CAM-MATIC CLEAT-150
Harken Standard Cam-Matic Cleat -150
Murrays Part# 28-0150
For high load/high-wear applications. Cam-Matic® ball bearing cam cleats engage and release easily, hold securely, and work with a wide range of line types and sizes. Cam teeth are smooth to protect line and because tooth grip is not required to close the pawls. Three rows of UV-stabilized, Delrin® ball bearings provide minimal friction for easy line engagement and release, even under high loads.
https://murrays.com/products/harken-cam-matic-cleat-carbo-cam
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0365.jpg?v=1676949901
HARKEN STANDARD CARBO-CAM CLEAT
Harken Standard Carbo-Cam Cleat
Murrays Part# 28-0365
Harken Cam-Matic® ball bearing cam cleats engage and release easily, hold securely, and work with a wide range of line types and sizes. Cam teeth are smooth to protect line and because tooth grip is not required to close the pawls. Multiple rows of UV-stabilized, Delrin® ball bearings provide minimal friction for easy line engagement and release, even under high loads.
https://murrays.com/products/harken-cam-matic-replacement-spring-for-150-365
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Cam-Matic-Spring-150.jpg?v=1676949902
HARKEN STANDARD CAM CLEAT SPRING
Harken Standard Cam Cleat Spring
Murrays Part# 28-0056
The Harken Cam-Matic Replacement Spring for 150, 365 for cleats #28-0150 and #28-0365.
Harken Part# MS-006
https://murrays.com/products/harken-cam-matic-wedge-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0145.jpg?v=1676949904
HARKEN STANDARD WEDGE KIT
Harken Standard Wedge Kit
Murrays Part# 28-0145
Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting.
Harken 15-degree wedge kit fits Harken 150 (#28-0150) and 365 Cam-Matics (#28-0365). 1-1/2" fastener spacing.
Harken Part#145
Hobie Part# H145
https://murrays.com/products/harken-cam-matic-spring-for-h423
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0056-1.jpg?v=1676949904
HARKEN MICRO CAM CLEAT SPRING
Harken Micro Cam Cleat Spring H423
Murrays Part# 28-0057
The Harken Cam-Matic Spring for H423- Cam spring for discontinued Harken cams #338 and #423.
Harken Part# MS-093
https://murrays.com/products/harken-eyestrap-for-150-365-cam-matic
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0137.jpg?v=1676949908
HARKEN 38MM STANDARD EYESTRAP
Harken 38mm Standard Eyestrap
Murrays Part# 28-0137
Eyestrap fits #28-0150 and #28-0365 cams. 3000 lb. breaking strength. Use 1/4" RH fasteners with 1-1/2" spacing.
Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads.
https://murrays.com/products/harken-eyestrap-for-cam-matic-338-423-468-471
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0281.jpg?v=1676949909
HARKEN 27MM MICRO EYESTRAP
Harken 27mm Micro Eyestrap
Murrays Part# 28-0281
Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads.
Eyestrap for Cam-Matic 338, 423, 468, 471
Stainless steel eyestrap mounts on Harken aluminum Micro Cam-Matic (#28-0338) or Micro Carbo-Cam (#28-0423).
https://murrays.com/products/harken-micro-cam-wedge-kit-for-468-471
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0297.jpg?v=1676949914
HARKEN MICRO WEDGE KIT
Harken Micro Wedge Kit
Murrays Part# 297
Micro cam wedge kit fits #28-0468 and #28-0471 Harken cam cleats. Weighs .16 oz.; 1-1/16 " fastener spacing.
Harken Part#297 Hobie part# H297
https://murrays.com/products/harken-micro-carbo-cam-cleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0471.jpg?v=1676949916
HARKEN MICRO CARBO-CAM CLEAT
Harken Micro Carbo-Cam Cleat
Murrays Part# 28-0471
Harken's Cam-Matic cleat has multiple rows of high-load ball bearings to reduce friction so that cams open easily for snap-down, rather than draw-through cleating. The cam horns and smooth V-shape guide line for easy entry. This allows precise sail control without having to readjust the cleated line.
https://murrays.com/products/harken-rebuild-kit-for-150-cam-matic-reg-cleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0150KIT.jpg?v=1676949916
HARKEN 150 CAM-MATIC CLEAT REBUILD KIT-1993 & NEWER
Harken 150 Cam-Matic Cleat Rebuild Kit - 1993 and Newer
Murrays Part# 28-0150KIT
This rebuild kit is the answer when plastic parts on Harken's 150 Cam-Matic® Cleat have worn out or suffered UV damage, and/or when the springs need to be replaced.
https://murrays.com/products/harken-roller-furling-drum-hi-load
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0165.jpg?v=1676949917
HARKEN STANDARD FURLING DRUM-3MM LUFF WIRE
Harken Standard Furling Drum-3mm Luff Wire
Murrays Part# 28-0165
Harken's high load drum features multiple stacked races of bearings to ensure smooth rotation under load.
https://murrays.com/products/harken-roller-furling-swivel-hi-load
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0164.jpg?v=1676949918
HARKEN STANDARD FURLING SWIVEL-3MM LUFF WIRE
Harken Standard Furling Swivel-3mm Luff Wire
Murrays Part# 28-0164
One of the simplest, strongest and least expensive roller furling swivels for roller furling jibs. SWL of 950 lbs.; distance between pins is 2-1/2".
Harken Part# 164
https://murrays.com/products/harken-sail-chafe-protector
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0285.jpg?v=1676949919
HARKEN SAIL CHAFE PROTECTOR (2)
Harken Sail Chafe Protector
Murrays Part# 28-0285
Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18
https://murrays.com/products/harken-shackle-stamped-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0138.jpg?v=1676949920
HARKEN 6MM STAMPED SHACKLE
Harken 6mm Stamped Shackle
Murrays Part# 28-0138
Harken's stainless stamped D-shackle has 1/4" diameter pin. For Harken 3.00" blocks. Stamped shackles are used on most Harken Small Boat Blocks and are appropriate for low loads. For higher loads, select forged and high-resistance shackles instead.
https://murrays.com/products/harken-screw-cleat-position-short
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-hfs1.jpg?v=1676949921
HARKEN SCREW: CLEAT POSITION (SHORT)
Harken Screw: Cleat Position (Short)
Murrays Part# 28-HFS1
Short screw is used to adjust cam cleat angle position on Harken "Classic" (not Carbo) base blocks.
https://murrays.com/products/harken-shackle-stamped-3-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0072.jpg?v=1676949922
HARKEN SHACKLE STAMPED 3/16"
Harken Shackle Stamped 3/16"
Murrays Part# 28-0072
Harken's stainless stamped D-shackle has 3/16" diameter pin. For Harken 2.25" blocks
https://murrays.com/products/harken-sheave-ball-bearing-16mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0415.png?v=1676949924
HARKEN 16MM SHEAVE
Harken Sheave Ball Bearing 16mm
The Harken Sheave Ball Bearing 16mm is the replacement for Harken 16mm air blocks. UV-stabilized Delrin® sheave with stainless steel ball bearings.
Specifications: 5/8" sheave diameter; 3/16" hole diameter, 5/16" wide; 3/16" maximum line diameter; 250 lb. safe working load. Harken #415.
https://murrays.com/products/harken-soft-attach-block-18mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2698.jpg?v=1676949925
HARKEN 18MM FLY SOFT-ATTACH BLOCK
Harken 2698 18mm FLY SOFT-ATTACH BLOCK
https://murrays.com/products/harken-spacer-for-f18-fairlead
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-4022.jpg?v=1676949925
HARKEN F18 FAIRLEAD SPACER
Harken Fairlead Spacer F18
Murrays Part# 28-4022
Mounted on a mainsheet base block, this plastic spacer provides a smooth surface to guide the line for the fairlead.
Sold individually
https://murrays.com/products/harken-stand-up-spring
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0071.jpg?v=1676949926
HARKEN 22MM SPRING
Harken 22mm Spring
Murrays Part# 28-0071
Harken universal stand-up spring supports blocks on pad eyes, eyestraps, bases and traveler cars. Weight: .32 oz.
This works well with snap shackle w/tack to upgrade a typical beachcat mainsheet system.
https://murrays.com/products/harken-traveler-car-1250-fixed-sheave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2736.jpg?v=1676949928
HARKEN 22MM HIGH-LOAD 1250 CAR-FIXED SHEAVES, EYESTRAP
Harken 22mm High-Load 1250 Car-Fixed Sheaves, Eyestrap
Murrays Part# 28-2736
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit.
https://murrays.com/products/harken-traveler-car-bearing-loader
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-HSB8_5f9869ed-a907-49f5-b5d8-336731eb2921.jpg?v=1696532423
HARKEN TRAVELER CAR BEARING LOADER
Harken Traveler Car Bearing Loader
https://murrays.com/products/harken-traveler-car-end-plates
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-hsb78.jpg?v=1676949929
HARKEN TRAVELER CAR END PLATES (2)
Harken Traveler Car End Plates
Murrays Part# 28-HSB78
End cap kit for #28-0214 Harken traveler car includes 2 end caps, screws, blue loc-tite and instructions.
Sold as a pair
https://murrays.com/products/harken-traveler-car-self-tacking-jib
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2732.jpg?v=1676949930
HARKEN 22MM LOW-LOAD LOOP CAR
Harken 22mm Low-Load Loop Car
Murrays Part# 28-2732
Harken's small boat CB jib car for Ti-lite is 2-7/8" long and 2-1/4" wide. The card body height is 15/16"; weighs 4 oz.; 500 lb. maximum working load; 2500 lb. breaking load.
Note: This track is compatible only with Harken low-profile traveler cars (#28-2732, #28-2736 and #28-2738).
Harken Part# 2732
https://murrays.com/products/harken-wire-fairlead-for-468-471
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0475.jpg?v=1676949932
HARKEN MICRO WIRE FAIRLEAD
Harken Micro Wire Fairlead
Murrays Part# 28-0475
Harken's wire fairlead places the fairlead ahead of the cam and holds line at cleat when not in use. Fits Harken 468 and 471 cams. Wire fairleads maintain a low profile while holding the line close to the cleat.
https://murrays.com/products/harken-traveler-end-stops-pair
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0173.jpg?v=1676949933
HARKEN 22MM ENDSTOP- LOW BEAM
Harken 22mm Endstops - Low Beam
Murrays Part# 28-0173
Pair of end stops to fit Harken #2720 traveler track. Use 5mm or #10FH fasteners. Approximately 7/8". For new style low profile tracks.
Sold in Pairs
https://murrays.com/products/harken-block-29mm-t2-soft-attach-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2146.jpg?v=1676949933
HARKEN 29MM T2 SOFT-ATTACH BLOCK
Harken 29mm T2 Soft-Attach Block
Murrays Part# 28-2146
For catamarans, this tie-on block eliminates the need for shackles, posts, swivels, etc. It is ultra-lightweight and sized like a bullet-block.
Specifications:
1-1/8" sheave diameter
330 lb. SWL
1000 lb. breaking strength
5/16" maximum line diameter
The high-strength composite T2™ is the first block with no metal shackles or rivets.
https://murrays.com/products/harken-traveler-track-end-stops-pair
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0174.jpg?v=1676949933
HARKEN 22MM END STOPS HIGH-BEAM
https://murrays.com/products/harken-x-treme-angle-fairlead-for-468-471
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0476.jpg?v=1676949936
HARKEN STANDARD X-TREME ANGLE FAIRLEAD
Harken Standard X-Treme Angle Fairlead
Murrays Part# 28-0150
The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. fits #28-0468 Micro Cam-Matic Aluminum and 28-0471 Micro Carbo Cam. Specifications: 7/8" height above cam; 1-7/16" high; 1-5/16" long; 2" wide; weighs 1 oz.; 1-1/16" fastener spacing.
Harken Part# 375
https://murrays.com/products/headboard-replacement-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1014.jpg?v=1676949937
HEADBOARD REPLACEMENT KIT
Headboard Replacement Kit
Murrays Part# 001-1014
Headboard Replacement Kit includes one pair of anodized aluminum plates with rivets to be set with a hammer. Plates measure 5" high x 4" wide x 6-1/4 diagonal. Replacement rivets are available separately (#19-5006).
https://murrays.com/products/hawaiian-catamaran-righting-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-3293-2-400x400.jpg?v=1733508163
H-14/16 HAWAIIAN RIGHTING
H14/16 Hawaiian Catamaran Righting System
Murrays Part# 001-3293
The Hawaiian Catamaran Righting System doubles as a preventer line. Big 1/2" braided righting line is suspended by shock cord under the trampoline. Lines terminate at the transom. Behind-the-back support allows lighter crews to combine weight or solo skippers to have a free hand for scooping up water (as with the Bucket Up Righting Aid) to add leverage. Racing class legal.
https://murrays.com/products/heavy-duty-swivel-plate-for-cleat-and-bullseye
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3012.jpg?v=1676949937
HEAVY DUTY SWIVEL PLATE FOR CLEAT AND BULLSEYE
Heavy Duty Swivel Plate for Cleat and Bullseye
Murrays Part# 25-3012
Heavy Duty Swivel Plate for Cleat and Bullseye. The HD swivel is the base plate for many catamaran and dingy sheeting systems. Found on all models of Hobie cats, as well as many Nacra and Prindle catamarans, as well as dingies, larger sailboats and cruising craft. The HD version of our Swivel Plate
https://murrays.com/products/hi-low-trapeze-adjustment-kit-no-cut
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1130.jpg?v=1676949941
HIGH-LOW TRAPEZE ADJUSTMENT KIT: NO CUT
Murrays Part# 001-1130
Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings. We suggest purchasing Can't Miss Rings (#01-0124) to supply a handle down low when needed. Order shock cord separately
https://murrays.com/products/hi-low-trapeze-adjustment-kit-with-handle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1140.jpg?v=1676949941
HIGH-LOW TRAPEZE ADJUSTMENT KIT WITH HANDLE
Hi-Low Trapeze Adjustment Kit with Handle
Murrays Part# 001-1140
Simple and adjustable on the fly, with constant upward tension on the trapeze ring and separate on-the-wire height adjustment. Easy to hook up and hike out with no initial adjustments. Very low stretch lines and Ronstan® turning blocks and aluminum Clamcleats® with roller fairleads for 2:1, easy-pull, easy-release height adjustment. Crew can move fore or aft while maintaining proper height. Constant, smooth-action tension on the trapeze ring
https://murrays.com/products/heavy-duty-swivel-with-aluminum-cam-roller-fairlead
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3020.jpg?v=1676949941
HEAVY DUTY SWIVEL WITH ALUMINUM CAM AND ROLLER FAIRLEAD
Heavy Duty Swivel with Aluminum Cam Roller Fairlead
Murrays Part# 25-3020
Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. This is a Murrays product that features an Aluminum Harken 150 cam cleat, and HD swivel plate and a HD roller fairlead. The advantage to the roller fairlead is that it can take a larger line diameter, up to 1/2", and handle heavy loads at extreme angles. Making it ideal for larger catamarans and sailors in high wind areas.
https://murrays.com/products/hobie-16-aussie-jib-halyard-kit-with-pigtail
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3302-Hobie-16-aussie-jib-halyard-instrustions.png?v=1676949942
H-16 AUSSIE JIB HALYARD KIT WITH PIGTAIL
Hobie 16 Aussie Jib Halyard Kit with Pigtail Murrays Part# 001-3302
Reduce mast compression by 66%! The Aussie Jib Halyard Kit for the Hobie® 16 allows easier tacking, better mast rotation and consistent mast bend! Use with existing lower forestay. The "fail-safe" pigtail keeps block failure from resulting in de-masting. A similar system is stock on new Hobie 16's. Complete kit includes everything you need: hardware with all Harken blocks, 70' of prestretched line, zippered pouch and instructions. 80660000
https://murrays.com/products/hobie-16-mast-hinge-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3021_Hobie_mast_hinge_kit_21380001.jpg?v=1758311991
HOBIE 16 MAST HINGE KIT
H16 Mast Hinge Kit
Murrays Part# 001-3021
The Hobie 16 Mast Hinge Kit by Murrays aids in raising and lowering the mast of a Hobie® 16. Complete heavy duty hinge assembly includes special pins with retainers to prevent loss. This hinge requires complete removal before sailing.
Note: This kit does not fit the newer style Hobie 16s, does not work on post 1993 Hobie 16s with the extreme mast rake, or on older boats with an updated mast step. 21380001
https://murrays.com/products/hobie-18-line-package
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/The_Murrays_Hobie_18_line_package_contains_all_the_lines_on_a_Hobie_18.jpg?v=1732294055
H-18 LINE PACKAGE
The Murrays Hobie 18 line package contains all the lines on a Hobie 18. We use Mainly Robline Neptune 500 for the sheets and Pelican VLS, Very Low Stretch, for the control lines.
Main Sheet
Jib Sheet
Daggerboard Handles
Outhaul
Downhaul
Mast Rotation
Main Halyard
Trampoline Lacing Lines
Trapeze Adjustment Line
Batten Ties
Roller Furline line
Jib Halyard
Jib Luff Tension Line
https://murrays.com/products/hobie-18-trapeze-shock-cord-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0129.jpg?v=1676949950
H-18 TRAP SHOCK CORD (4)
The Hobie 18 Trapeze Shock Cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. On this kit for Hobie® 18, one hook connects to either the thimble on the trapeze wire or the adjustment line, then runs through the hull fairlead and through the eyestrap under the lip of the hull near the bow or stern for crew and skipper trapeze lines respectively. The 3/16" shock cord stretches more and slides through ferrules better than larger diameter shock cord. Includes four
https://murrays.com/products/hobie-aussie-halyard-ring
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie_Aussie_Halyard_Ring_3064.jpg?v=1751474781
HOBIE AUSSIE HALYARD RING
Hobie Aussie Halyard Ring
Murrays Part# 007-3064
If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Murrays Aussie Ring (#01-4216).
Hobie® Part# 3064
https://murrays.com/products/hobie-18-and-21sc-shroud-5-32-black-roller-swaged
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_b6415359-e0e4-4df4-ae53-a9804c790b95.jpg?v=1676949952
H-18/21 SC SHROUD 5/32" ROLLER SWAGED
Hobie 18 shroud - side stay - Hobie part number 6079001 white and 60792001 black
https://murrays.com/products/hobie-croakies-glasses-retainers
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1553CR.jpg?v=1676949954
HOBIE CROAKIES GLASSES RETAINERS
https://murrays.com/products/hobie-baby-bob-mast-float
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30115_2_z208.jpg?v=1726077064
MAST FLOAT WAVE BABY BOB
The Hobie Baby Bob Mast Float is designed to offer the safety and security of mast head flotation with minimized drag through the air, the Baby Bob is fixed in position to the mast head with the included mounting hardware.
The Baby Bob is standard on all Hobie Waves This float will also fit the Getaway and Hobie 16 with or without CompTip. Some drilling may be necessary. The larger Mama Bob (#07-30119) is also an option for most Hobies.
The Baby Bob Mast Float displaces 32 pounds of water, is 20" long x 1
https://murrays.com/products/hobie-cat-mast-cleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/11-6481-_Hobie_mast_cleat.jpg?v=1736812669
MAST CLEAT
Mast Cleat
Murrays Part# 011-6481
The Mast Cleat is a can be used as a downhaul / halyard cleat on a Hobie 14 and or 16. Compare to Hobie Cat® factory item #10730000.
31mm Center to Center.
https://murrays.com/products/hobie-deluxe-sail-bag
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-3121-Deluxe-Hobie-Bag-1.jpg?v=1676949956
HOBIE DELUXE SAIL BAG
Hobie Deluxe Sail Bag
https://murrays.com/products/hobie-jib-track-end-stop
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0366.webp?v=1757432550
RONSTAN JIB TRACK END CAP
https://murrays.com/products/hobie-mama-bob-universal-mast-float-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-30112.jpg?v=1676949960
MAST FLOAT UNIVERSAL MAMA BOB
UNIVERSAL MAMA BOB MAST FLOAT
The Hobie Mama Bob Universal Mast Float Kit aids in preventing your boat from going full turtle (mast straight down) when capsized, helping to prevent damage to your rig and sails should they contact the bottom. This model (Hobie® Cat #30112) is mast-side mounted system. The Universal Mama Bob float has been adapted for use as a shaft-mounted "universal" mast float that does not rotate, but is held in a fore-aft position in alignment with the mast for minimum drag while
https://murrays.com/products/hobie-main-halyard-hook-for-the-hobie-14-hobie-16-wave-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3330.jpg?v=1676949961
H-14/16 MAIN HALYARD HOOK
H14/16 Main Halyard Hook
Murrays Part# 25-3330
The main halyard hook is used on the Hobie 14, Hobie 16, Wave, Getaway, Prindles, Sol Cats and Nacras that use a wire halyard. Use two 6-4 rivets (#19-5031) and two casings (#19-5020) for installation.
Hobie part# 10680000
Nacra part number 6812
https://murrays.com/products/hobie-rudder-tight-bushing-most-hobies
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2284.jpg?v=1676949965
RUDDER TITE BUSHING EACH
Hobie rudder bushing. Hobie part number 8062001
https://murrays.com/products/hobie-wave-club-3-piece-black-mesh-trampoline
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-3100-long.jpg?v=1676949965
WAVE CLUB 3-PIECE MESH TRAMPOLINE-BLACK
Wave Club 3-Piece Mesh Trampoline-Black
The Murrays Hobie Wave Club 3-Piece Black Mesh Trampoline is not Hobie Class-legal for racing. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle.
Features: A main halyard pocket and hiking straps.
Order 43' of 1/4" low-stretch line for lacing (21' for center and two 11' pieces aft).
Compare to Hobie Part#
https://murrays.com/products/hobie-standard-bridle-vane
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/04-7703_2.jpg?v=1676949966
HOBIE STANDARD BRIDLE VANE
HOBIE STANDARD BRIDLE VANE
Features snap-lock pin and wide indexing support for positive attachment to forestay adjuster. Durable, 7" mylar wind vane freely rotates on 12-1/2" long stainless rod. Wind indicator easily detaches with stainless pull ring. Fits all boats that use a 7- or 10-hole adjuster at the forestay-to-bridle connection.
Use adapter #08-1451 to mount it to a Hobie roller furling drum as used on the Hobie Getaway and 18.
Hobie item #CM7703.
https://murrays.com/products/hook-3-roller-all-metal
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/51VGDa10W5L._AC_SL1001.jpg?v=1738972890
HOOK 3-ROLLER ALL METAL
https://murrays.com/products/hobie-wave-getaway-tiller-connection-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/1957_2_z203.jpg?v=1726096068
WAVE/GETAWAY TILLER CONNECTION KIT
https://murrays.com/products/hull-cradle-h17-h18-bow-each
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/13-7030.jpg?v=1676949969
HULL CRADLE: BOW
Hull Cradle: Bow
Murrays Part# 13-7030
https://murrays.com/products/hook-4-roller-all-metal
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-5729.jpg?v=1676949970
HOOK 4-ROLLER ALL METAL
Hook 4-Roller All Metal
Murrays Part# 27-5729
All-metal block features cast aluminum hook and body with stainless steel roller and shaft. Strong!
https://murrays.com/products/hull-cradle-h20-bow-n5-7-stern-tiger-bow
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/13-7020.jpg?v=1676949970
HULL CRADLE: V SHAPED
Hull Cradle: V Shaped
Murrays Part# 13-7020
https://murrays.com/products/hull-cradle-h20-n5-8-n6-0-tiger-stern-each
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/13-7010.jpg?v=1676949973
HULL CRADLE: UNIVERSAL
Hull Cradle: Universal
Murrays Part# 13-7010
https://murrays.com/products/hull-cradles-hobie-universal-tiger-pair
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1624-2013.jpg?v=1676949973
HOBIE UNIVERSAL HULL CRADLES
Hobie Universal Hull Cradles
Murrays Part# 007-1624
Hobie Cat's universal thermoformed cradles are stronger and less likely to scratch than fiberglass. Carpet provides additional hull protection. The unique wide bottom will fit either a round tube or a flat surface and mounting hardware is included. Pair.
Dimensions of inside of cradle:
Width: 14-1/2"
Depth: 4"
Width 1" from bottom: 10-1/4"
https://murrays.com/products/inter-18-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_d6428286-af38-48e3-9a76-09974acff8f5.jpg?v=1676949974
NACRA INTER 18 BRIDLE 5/32"BLACK WIRE
Nacra Inter 18 Bridle 5/32" Black Wire
Murrays Part# 002-5315-22
Single black bridle for Inter 18 is constructed of black-coated, 5/32" 1x19 wire to factory specifications.
https://murrays.com/products/inter-18-double-trapeze-black-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DoubleTrap_a24c1a05-22c0-44d4-8572-b1ab0f80a11e.jpg?v=1676949974
NACRA INTER 18 DOUBLE TRAPEZE BLACK WIRE (4)
Nacra Inter 18 Double Trapeze (4 handles)
The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.
A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adjustment kit
Sailing Harness
Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140
https://murrays.com/products/inter-18-diamond-wire-without-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireH20Inter.jpg?v=1676949977
NACRA INTER 18 DIAMOND WIRE WITHOUT TURNBUCKLE
Inter 18 Diamond Wire without Turnbuckle
Murrays Part# 002-5394-20
Diamond wire without turnbuckle for Inter 18 is constructed to factory specifications. Includes both sides.
https://murrays.com/products/inter-18-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0244-02A_8abfff1b-e324-49ff-a13d-55ce2c50c673.jpg?v=1676949977
NACRA INTER 18 RF FORESTAY 5/32" BLACK WIRE
Nacra Inter 18 Roller Furling Forestay 5/32" Black Wire
Murrays Part# 002-5345-92
Forestay for Inter 18 is constructed to 5/32" black-coated wire to factory specifications.
https://murrays.com/products/inter-18-shroud-5-32-roller-swaged-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_f6605c66-00e7-4699-a427-d757e1547d79.jpg?v=1676949978
NACRA INTER 18 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
Inter 18 Shroud 5/32" Black Wire Roller Swaged
Murrays Part# 002-5305-12
Single black shroud for Inter 18 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
https://murrays.com/products/inter-18-jib-halyard
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/inter-20-diamond-wire-without-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireH20Inter_2cc2af5d-77e2-41e2-802f-c34d831fbc4e.jpg?v=1676949980
NACRA INTER 20 DIAMOND WIRE WITHOUT TURNBUCKLE
Inter 20 Diamond Wire without Turnbuckle
Murrays Part# 002-5494-20
Diamond wire without turnbuckle for Inter 20 is constructed to factory specifications. Includes both sides.
https://murrays.com/products/inter-20-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_aca8899b-4c4c-447e-9fc4-d279827c0bde.jpg?v=1676949981
NACRA INTER 20 BRIDLE 5/32" BLACK WIRE
Nacra Inter 20 Bridle 5/32"
Black Wire
Murrays Part# 002-5415-22
Single black bridle for Inter 20 is constructed to factory specifications. You must select the type of jib your boat has so that the bridle's length and fittings will be correct for your boat.
https://murrays.com/products/inter-20-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Nacra.jpg?v=1676949982
NACRA INTER 20 FORESTAY 5/32" BLACK WIRE
Inter 20 Forestay 5/32" Black Wire
Murrays Part# 002-5445-12
Forestay for Inter 20 (without roller furling jib) is constructed of 5/32" black-coated wire to factory specifications.
https://murrays.com/products/inter-20-jib-halyard-wire
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0786-00_f5d351cb-96f9-4de9-a90b-73e6be8570fd.jpg?v=1676949984
INTER 20 JIB HALYARD WIRE
Inter 20 Jib Halyard Wire
Murrays Part# 002-5483-80
Jib halyard wire for Inter 20 is constructed to factory specifications.
https://murrays.com/products/inter-20-rf-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0445-32_b477d4ab-0797-4374-842f-6f6a57254f59.jpg?v=1676949985
INTER 20 ROLLER FURLING FORESTAY 5/32" BLACK WIRE
Inter 20 Roller Furling Forestay 5/32" Black Wire
Murrays Part# 002-5445-32
Forestay for Inter 20 with roller furling jib is constructed of 5/32" black-coated wire to factory specifications.
https://murrays.com/products/inter-nacra-f17-bridle-1-8-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/pull-to-pull-fittings.jpg?v=1676949985
NACRA INTER 17 BRIDLE 1/8" BLACK WIRE
Nacra Inter 17 Bridle 1/8" Black Wire
Murrays Part# 002-5214-12
https://murrays.com/products/inter-20-shroud-5-32-black-roller-swaged
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_c8c00cd4-8306-413a-aec6-e934474c7a77.jpg?v=1676949985
INTER 20 SHROUD 5/32"BLACK WIRE ROLLER SWAGED
Inter 20 Shroud 5/32" Black Wire Roller Swaged
Murrays Part# 002-5405-12
Single black shroud for Inter 20 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
https://murrays.com/products/inter-nacra-f17-diamond-wire-without-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireH20Inter_c9387078-8a03-4205-8f21-9d2373e18c28.jpg?v=1676949988
INTER F17 DIAMOND WIRE WITHOUT TURNBUCKLE
Inter F17 Diamond Wire without Turnbuckle
Murrays Part# 002-5294-20
Set of diamond wires for both sides is a continuous wire with one thimble at the bottom. No turnbuckle. Constructed to factory specifications.
https://murrays.com/products/inter-nacra-f17-forestay-1-8-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_BK_957661eb-6234-4f8c-919d-70c66c2eaf89.jpg?v=1676949989
NACRA INTER 17 FORESTAY 1/8" BLACK WIRE
Nacra Inter 17 Forestay 1/8" Black
Murrays Part# 002-5244-02
Because the manufacturer's specifications vary, a pull-to-pull length is required to ensure correct length for your boat.
https://murrays.com/products/jib-clew-pigtail-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-4015.jpg?v=1676949989
JIB CLEW PIGTAIL KIT
Jib Clew Pigtail Kit
Murrays Part# 001-4015
Easy-connect Dyneema® jib clew pigtail. Speed up tacks and improve sail shape by moving jib clew blocks away from the jib clew.
Color may vary from picture.
Features:
jib Clew Pigtails move jib clew blocks about 14" from jib clew— saves 4 feet of sheeting/unsheeting per tack!
"Locked" eye splices— jib blocks cannot slip or un-tie.
Save weight (only 2.4oz) and move weight away from jib clew— better sail shape in light wind.
Lightweight, easy-connect—
https://murrays.com/products/inter-nacra-f17-trapeze-wires-black-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/SingleTrap_386ae5c3-2231-4ec6-a4f3-0a7f585a2c4b.jpg?v=1676949989
NACRA INTER 17 TRAPEZE BLACK WIRES (2)
Nacra Inter 17 Trapeze Black Wires
(2 Handles)
Murrays Part# 002-5253-02
The Nacra Inter F17 Trapeze Wires Black (2) basic assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order shock cord and adjustment kits separately.
A trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) may be added to wire with no installation charge! Check box when ordering and wire length will be adjusted accordingly.
https://murrays.com/products/jib-halyard-with-sister-clips-h18-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/04-7732.jpg?v=1676949992
H-18/20 JIB HALYARD WITH CLIP
https://murrays.com/products/jib-snorkel-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1815.jpg?v=1676949993
GETAWAY JIB SNORKEL
https://murrays.com/products/jib-traveler-cars-for-integrated-track
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/012-3021_Hobie_16_jib_traveler_cars.jpg?v=1775597350
JIB TRAVELER CARS INTEGRATED TRACK
Hobie 16 Jib Traveler Cars Integrated
The Tren Tec jib traveler cars fit the Hobie 16 integrated jib track which is extruded into the crossbar, as opposed to the external track which is riveted to the crossbar. The integrated track was standard on post-1997 Hobie® 16's. The black plastic cars have four holes and slide freely in the track. Low profile shape saves needed space when mast is raked to the extreme.
Sold as a pair
Hobie Cat® uses Part# 1553 for this item
https://murrays.com/products/jib-traveler-cars-for-original-track
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/012-3020.jpg?v=1775597435
JIB TRAVELER CARS EXTERNAL TRACK
Hobie 16 Jib Traveler Cars for External Track
Tren Tec's black plastic cars have four holes and slide freely in the track. Low profile shape saves needed space when mast is raked to the extreme. For 1996 and earlier Hobie 16s with external track that is riveted to the front crossbar.
Sold in pairs
Hobie uses Part# 1552 for this item.
https://murrays.com/products/jib-halyard-with-sister-clips-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/04-7734.jpg?v=1676949997
PRINDLE JIB HALYARD WITH SISTER CLIPS
https://murrays.com/products/jib-traveler-control-kit-fixed-cam
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3112.jpg?v=1676949997
JIB TRAVELER CONTROL KIT: FIXED CAM
Jib Traveler Control Kit:
Fixed Cam
Murrays Part# 001-3112
A jib traveler system allows remote adjustment of the jib cars. This dramatically increases downwind speed and may help avoid a pitchpole caused by your crew moving leeward to make an adjustment by hand.
https://murrays.com/products/key-ball-connectors-original-bethwaite
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1212.jpg?v=1676949997
KEY-BALL CONNECTOR
https://murrays.com/products/key-ball-cant-miss-connectors
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0142.jpg?v=1676949997
KEY-BALL CAN'T MISS CONNECTOR
Key-Ball Can't Miss Connector
Murrays Part# 001-0142
Can't Miss handles are designed to allow the sailor to hook-up without even looking at the trapeze hook. This lightweight, extra-wide hook-up ring has a center-hold handle with molded finger ridges. Double swaged 1/8" (1x19) wire is color-coated with high pressure nylon tubing. Use this pair of connectors with Carbon Key-Hole Buckle (#01-0311), sold separately.
https://murrays.com/products/key-ball-cant-hurt-connectors
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1213.jpg?v=1676950001
KEY-BALL CAN'T HURT CONNECTOR
Key-Ball Can't Hurt Connectors
Murrays Part# 001-1213
This pair of connectors is designed for use with the carbon Key-Hole buckle #01-0311. Can't Hurt rings are a light and flexible alternative to "hard" stainless steel dogbones. Black high pressure nylon tubing covers 1/8" (1x19) stainless wire.
https://murrays.com/products/kisme-kleet-package-of-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-1010.jpg?v=1676950001
KISME KLEET (4)
Kisme Kleet (4)
Murrays Part# 005-1010
https://murrays.com/products/kisme-it-traveler-cars
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/05-0200.jpg?v=1743544106
KISME "IT" TRAVELER CAR (PR)
https://murrays.com/products/kisme-ok-car-only
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0400.jpg?v=1676950005
OXEN BLOCK "OK" CAR ONLY (EA)
Kisme "OK" Car Only
Murrays Part# 005-0400
H16 Jib car upgrade kit. Stainless construction with remote traveler control attachment points and low profile jib sheet becket attachment. Purchase the H16 Traveler control kit to upgrade your vintage jib car and sheeting system.
Sold Individually
https://murrays.com/products/lido-14-forestay-3-32-white
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-5143-91.jpg?v=1676950005
LIDO 14 FORESTAY 3/32" WHITE WIRE
Lido 14 Forestay 3/32" White
Murrays Part# 002-5143-91
Forestay for Lido 14 is constructed of 3/32" white-coated wire to factory specifications.
https://murrays.com/products/large-fairlead-1-7-16-x-5-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-1065_1c7f1173-d7b3-4e12-ae70-745456417dbc.jpg?v=1676950005
LARGE FAIRLEAD: 1-7/16 X 5/8"
Large Fairlead: 1-7/16 X 5/8"
Murrays Part# 25-1065
Large stainless steel fairlead is used on Hobie® rear crossbar.
Measurements:
A = 1-7/16" (36.5mm)
B = 5/8" (16mm)
C = 3/16" (5mm)
Use two 6-4 rivets (#19-5031) for installation.
https://murrays.com/products/lido-14-shroud-3-32-white
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-5143-91_c76e97df-2605-414d-9b01-f106b411de8f.jpg?v=1676950009
LIDO 14 SHROUD 3/32" WHITE WIRE
Lido 14 Shroud 3/32" White Wire
Murrays Part# 002-5103-91
Single white shroud for Lido 14 is constructed to factory length.
https://murrays.com/products/lock-nut-5-16-x-24-right-hand
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1056-1.jpg?v=1676950010
LOCK NUT 5/16X24 RH
Lock Nut 1/4 X 28
Murrays Part# 002-1047-1
Tubular turnbuckle lock nut. Right hand thread.
https://murrays.com/products/marine-eye-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1054_2.jpg?v=1676950013
MARINE EYE 3/32" (SS)
https://murrays.com/products/m8-t-nuts-stainless-steel-hydrofoil-mast-track-inserts
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/M8-track-insert.jpg?v=1676950013
STAINLESS STEEL M8 T-NUTS
The heavy duty 8mm Hydrofoil T-Nuts (Stainless Steel) are rectangular M8 channel inserts/T-Nuts. Designed for use in hydrofoil mast tracks. Stainless steal inserts are an upgrade to the standard Brass inserts. Great for salt water environments, they resist corrosion.
Compatable with all Liquid Force, Lift, Slingshot, FoilMount (stainless only), etc track systems.
Specs: M8 standard metric threads which is standard for all hydrofoil tracks. M8 t-nuts also work in windsurfing mast tracks as well
https://murrays.com/products/mast-bearing-kit-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-4045.jpg?v=1676950015
HOBIE 18 MAST BEARING KIT
Murrays Part# 001-4045
Hobie 18 Mast Bearing Kit enables smooth mast rotation on the Hobie® 18. The kit includes a new mast bearing, stainless steel washers and Teflon washer.
To mount, use one #19-3019 screw (included) for post-1990 Hobie 18 or one #19-3020 screw (sold separately) for pre-1990 Hobie 18.
Compare to Hobie Cat® #1132 (bearing 60110000 and Teflon™ washer).
https://murrays.com/products/marine-fork-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1055_2.jpg?v=1676950015
MARINE FORK 3/32" (SS)
https://murrays.com/products/mast-bearings-hobie-14-hobie-16-package-of-100
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2042.jpg?v=1676950017
H14/16 MAST BEARING (100-PKG)
H14/16 Mast Bearing (Pack of 100)
Murrays Part# 001-2042
Teflon® mast bearings for Hobie® 14 or 16 are .06" thick and will form to mast base with first use. Package of 100 mast chips.
https://murrays.com/products/mast-float-mama-bob-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-30119.jpg?v=1676950017
MAST FLOAT MAMA GETAWAY
Mast Float Mama Getaway
Murrays Part# 007-30119
https://murrays.com/products/mast-hinge-h16-only
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3360.jpg?v=1676950019
H-16 (ONLY) MAST HINGE
Mast Hinge H-16 (Only)
Murrays Part# 25-3360
Heavy duty mast base hinge for Hobie® 16 only (does not fit Hobie 14). Clevis pins are sold separately.
NOTE: This kit does not fit the newer style Hobie 16s, does not work on post 1993 Hobie 16s with the extreme mast rake, or on older boats with an updated mast step. The way to tell is if your mast step has a horizontal mast base then it is old style, new style has a slant toward the stern.
https://murrays.com/products/mast-float-attachment-h14-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-30116.jpg?v=1676950019
H-14/16 MAST FLOAT ATTACHMENT KIT
Mast Float Attachment Kit: H14/16
Murrays Part# 007-30116
This attachment kit for Hobie® 14 or 16 comes with Hobie® Mama and Baby Bobs, but is also offered separately here.
https://murrays.com/products/mast-protector-5-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-9503.jpg?v=1676950021
5" ALUMINUM MAST PROTECTOR
Mast Protector 5" (Aluminum)
Murrays Part# 001-9503
Spread the load over a broad section of mast. 5" aluminum protector is for tight-fitting boom ends. May be required to uphold mast warranty. Limited to stock on hand.
https://murrays.com/products/maxi-rigg-tool
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0015.jpg?v=1676950023
MAXI RIGG TOOL
Murrays Part# 001-0015
Need a little help? Use the Maxi Rigg tool to hand-hold spinnaker sheets or pull anchor lines up to 1/2" diameter with minimum strain on hands or grip. Hold and control spinnaker sheets. Unique safety swivel allows for easy and safe release of lines in case of sudden or too much pull. You can also use two to pull anchor lines hand-over-hand.
Assorted colors available
Line size: 5/16" to 1/2"
Hobie Cat® uses item #2069 for the Maxi Rigg Tool.
https://murrays.com/products/mast-step-system-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-8002_2_Nacra_mast_step-base-rod.jpg?v=1768324043
NACRA MAST STEP SYSTEM
Nacra mast step system-mast base-Nacra mast support rod-Nacra mast ball-Nacra mast Sopport Pad
https://murrays.com/products/mini-cam-kit-for-elliptical-surface
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0112.jpg?v=1676950026
MINI CAM KIT FOR ELLIPTICAL SURFACE
Mini Cam Kit for Elliptical Surface
Murrays Part# 001-0112
Mount a mini cam cleat, in any orientation, on almost any elliptical surface. Fits most elliptical surfaces: Hobie®, Nacra, Prindle masts and most others; Hobie and Prindle main beams, etc. You drill holes in the pad to suit your desired line/cleat orientation.
https://murrays.com/products/mini-fairlead-1-x-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-0338.jpg?v=1676950027
RONSTAN MINI FAIRLEAD: 1 X 1/4
Mini Fairlead: 1 X 1/4
Murrays Part# 25-0338
Stainless mini fairlead strap measurements:
A = 1 1/8" between holes center-to-center
B = 3/8" height
C = 3/16" hole diameter
Compare to Hobie Part 11470000
Rear Crossbar Padeye
https://murrays.com/products/murrays-harken-57mm-carbo-6-1-mainsheet-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/6to1hobiemainsheetsystem.jpg?v=1760743377
HARKEN 57MM CARBO 6:1 MAINSHEET SYSTEM
https://murrays.com/products/murrays-retro-t-shirt-navy
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-00-Murrays-Retro-Tee.jpg?v=1676950029
MURRAYS RETRO TEE
Murray's Retro Tee
Show off your Murrays pride with this Retro Murrays cotton T-Shirt. We brought this design back from the archives to enjoy for every generation. These shirts are super comfy cotton blend and a must-have for any regatta. Don't be caught without one!
https://murrays.com/products/mylar-sail-repair-tape-clear-2x10
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-3410-2013.jpg?v=1676950030
MYLAR 2x10" SAIL REPAIR TAPE-CLEAR
Mylar Sail Repair Tape 2x10"- Clear
Murrays Part# 010-3410
Make quick and easy sail repairs with Bainbridge's 10' roll of 2"-wide clear mylar polyester film with pressure-sensitive adhesive.
https://murrays.com/products/n5-0-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_cb602cdf-0ac0-4da5-ad91-49804012ffde.jpg?v=1676950031
N-5.0 BRIDLE 5/32- BLACK
https://murrays.com/products/n5-0-diamond-wire-with-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireNacPrin.jpg?v=1676950032
N-5.0 DIAMOND WIRE WITH TURNBUCKLE
N5.0 Diamond Wire with Turnbuckle
Murrays Part# 002-4194-20
Diamond wire with turnbuckle for Nacra 5.0 is constructed to factory specifications.
https://murrays.com/products/n5-0-shroud-5-32-black-roller-swaged
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_46abfbad-3f4b-4c67-83cb-35cf41326c55.jpg?v=1676950035
N-5.0 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
N5.0 Shroud 5/32" Black Wire Roller Swaged
Murrays Part# 002-4105-12
Single black shroud for Nacra 5.0 is constructed of 5/32" wire and is hydraulically swaged to be clean and strong. Constructed to factory specifications.
https://murrays.com/products/n5-0-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_656c07ec-0344-42dc-924d-913f5ff45914.jpg?v=1676950036
N-5.0 FORESTAY 5/32" BLACK WIRE
N5.0 Forestay 5/32" Black Wire
Murrays Part# 002-4145-12
Black forestay for Nacra 5.0 is constructed to factory specifications.
https://murrays.com/products/n5-2-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_c8690486-7efb-4bb2-bfca-8f3bf4782aa6.jpg?v=1676950039
N-5.2 BRIDLE 5/32 BLACK WIRE
https://murrays.com/products/n5-2-diamond-wire-with-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-4294-20.jpg?v=1676950040
N-5.2 DIAMOND WIRE WITH TURNBUCKLE
N5.2 Diamond Wire with Turnbuckle
Murrays Part# 002-4294-20
Diamond wire with turnbuckle for Nacra 5.2 is constructed to factory specifications.
https://murrays.com/products/n5-2-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_86bed12c-cbda-4df9-869c-72f3a96bc20a.jpg?v=1676950043
N-5.2 FORESTAY 5/32" BLACK WIRE
N5.2 Forestay 5/32" Black Wire
Murrays Part# 002-4245-12
Forestay for Nacra 5.2 is constructed to factory specifications with 5/32" black-coated wire.
https://murrays.com/products/n5-2-shroud-5-32-black-roller-swaged
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_0c6ed670-cf9e-48f6-8b7f-a44ecd940b6d.jpg?v=1676950044
N-5.2 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
N5.2 Shroud 5/32" Roller Swaged
Murrays Part# 002-4205-12
Single black shroud for Nacra 5.2 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
Compare to Nacra product #9536
https://murrays.com/products/n5-5sl-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_c1ee1f2a-e241-468d-b870-929c920a2bc7.jpg?v=1676950047
N-5.5SL BRIDLE 5/32-BLACK WIRE
https://murrays.com/products/n5-5sl-diamond-wire-with-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireNacPrin_5ce81e0d-7230-46b4-9d9d-9a00cde34536.jpg?v=1676950048
N-5.5SL DIAMOND WIRE WITH TURNBUCKLE
N5.5SL Diamond Wire with Turnbuckle
Murrays Part# 002-4394-20
Diamond wire with turnbuckle for Nacra 5.5SL is constructed to factory specifications.
https://murrays.com/products/n5-5sl-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Nacra_7e0eaf42-6d5a-4d8f-9163-c9cd39e80b7e.jpg?v=1676950049
N-5.5SL FORESTAY 5/32" BLACK WIRE
N5.5SL Forestay 5/32" Black Wire
Murrays Part# 002-4345-12
Forestay for Nacra 5.5SL is constructed to factory specifications from 5/32" black-coated wire.
https://murrays.com/products/n5-5sl-jib-block-wire
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/n5-7-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2415-22.jpg?v=1676950052
N-5.7 BRIDLE 5/32 BLACK WIRE
https://murrays.com/products/n5-5sl-n5-7-shroud-5-32-black-roller-swaged
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_4de9e966-8997-47cd-ad48-aa8141c9e688.jpg?v=1676950052
N-5.5SL/5.7 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
N5.5SL, N5.7 Shroud 5/32" Black Wire Roller Swaged
Murrays Part# 002-4305-12
Single black shroud for Nacra 5.5SL and 5.7 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
https://murrays.com/products/n5-7-diamond-wire-with-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireNacPrin_33a55344-84c4-41c9-b33f-75d2cb18dea0.jpg?v=1676950053
N-5.7 DIAMOND WIRE WITH TURNBUCKLE
N5.7 Diamond Wire with Turnbuckle
Murrays Part# 002-4494-20
Diamond wire with turnbuckle for Nacra 5.7 is constructed to factory specifications.
https://murrays.com/products/n5-7-forestay-5-32-black-roller-swaged
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Thimble-MarineEye.jpg?v=1676950056
N-5.7 FORESTAY 5/32" BLACK WIRE ROLLER SWAGED
N-5.7 Forestay 5/32" Black Wire Roller Swaged
Murrays Part# 002-4445-12
Forestay for Nacra 5.7 is constructed to factory specifications from 5/32" black-coated wire with hydraulically swaged fittings.
https://murrays.com/products/n5-7-main-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N5.0-5.2-5.7-5.5SL-main-halyard-with-shackle-and-stop.jpg?v=1676950056
N-5.7 MAIN HALYARD W/SHACKLE
https://murrays.com/products/n5-8-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_2c6a2830-8b22-495c-953d-7bfa48417157.jpg?v=1676950057
N-5.8 BRIDLE 5/32 BK
https://murrays.com/products/n5-8-diamond-wire-with-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireNacPrin_84e34f3c-511a-465b-8e8c-a2f404c9082c.jpg?v=1676950057
N-5.8 DIAMOND WIRE WITH TURNBUCKLE
https://murrays.com/products/n5-8-jib-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N-5.7-5.5SL-5.8-jib-halyard-with-shackle-and-pully-with-becket.jpg?v=1676950060
N-5.8 JIB HALYARD W/SHACKLE
https://murrays.com/products/n5-8-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Nacra_2390f028-dc49-42f6-9382-0eab237afe5e.jpg?v=1676950060
N-5.8 FORESTAY 5/32" BLACK WIRE
N5.8 Forestay 5/32" Black Wire
Murrays Part# 002-4545-12
The Nacra 5.8 forestay is constructed to factory specifications from 5/32" black-coated wire.
Their are 2 versions of the Nacra 5.8. The standard 5.8 which is mostly found in Europe and N.A. which is the North American version. The N.A. has a longer forestay that connects to a bridle foil rod instead of bridle wires.
https://murrays.com/products/main-halyard-ring-murrays
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-4216.jpg?v=1715122072
MAIN HALYARD RING (MURRAYS)
Main Halyard Ring (Murrays)
Murrays Part# 001-4216
If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Hobie Aussie Ring (#07-3064).
This item replaces discontinued Part
https://murrays.com/products/n5-8-shroud-5-32-black-roller-swaged
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_44ed84f2-41ba-4983-b74c-c3d1122a7d54.jpg?v=1676950064
N-5.8 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
N5.8 Shroud 5/32" Black Wire Roller Swaged
Murrays Part# 002-4505-12
Single black shroud for Nacra 5.8 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
https://murrays.com/products/n6-0-diamond-wire-with-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireNacPrin_4574f6cd-2ed0-4dc3-b11f-97855f1c8efd.jpg?v=1676950064
N-6.0 DIAMOND WIRE WITH TURNBUCKLE
N6.0 Diamond Wire with Turnbuckle
Murrays Part# 002-4694-20
Diamond wire with turnbuckle for Nacra 6.0 is constructed to factory specifications.
https://murrays.com/products/n6-0-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_1d878054-c73d-48d1-ade8-452e89dc666e.jpg?v=1676950064
N-6.0 BRIDLE 5/32 BLACK WIRE
https://murrays.com/products/n6-0-shroud-5-32-black-roller-swaged
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_1a2bf6d5-661f-442b-87c4-878d51fe56ee.jpg?v=1676950068
N-6.0 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
N6.0 Shroud 5/32" Black Wire Roller Swaged
Murrays Part# 002-4605-12
Single black shroud for Nacra 6.0 is hydraulically swaged to be clean and strong. Constructed to factory specifications. Length: 22' 5-1/4" pull-to-pull.
To help differentiate between the standard Nacra 6.0 and Nacra 6.0 NA (North American), please note that the standard Nacra 6.0 came stock with a shorter mast and without a bridle foil. The Nacra 6.0 NA came stock with a longer mast and had a bridle foil.
https://murrays.com/products/n6-0-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Nacra_7c57659c-74de-4a4b-b17b-e33d3c52386f.jpg?v=1676950068
N-6.0 FORESTAY 5/32" BLACK WIRE
N6.0 Forestay 5/32" Black Wire
Murrays Part# 002-4645-12
Forestay for Nacra 6.0 is constructed of black-coated 5/32" wire to factory specifications.
https://murrays.com/products/n6-0-n6-0na-jib-block-wire
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/mast-bearings-hobie-14-hobie-16-package-of-3
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-2041_Hobie_16_mast_bearing.jpg?v=1736459230
H-14/16 MAST BEARING (3-PKG)
Hobie 16 mast bearings. Teflon mast chips, Hobie part number 11110005
https://murrays.com/products/n6-0na-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-5415-22.jpg?v=1676950070
N-6.0NA BRIDLE 5/32-BLACK WIRE
https://murrays.com/products/n6-0na-diamond-wire-short
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/n6-0na-diamond-wire-long
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireNacPrin_0097c493-f727-4d64-9b5d-42a78d4eb927.jpg?v=1676950072
N-6.0NA DIAMOND WIRE LONG
N6.0 North American Diamond Wire Long
Murrays Part# 002-4794-20
Lower diamond wire with turnbuckle and roller for Nacra 6.0 NA (North American) is constructed to factory specifications.
https://murrays.com/products/n6-0na-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Nacra_18153025-4791-48a7-af2f-c33aafc3841b.jpg?v=1676950073
N-6.0NA FORESTAY 5/32" BLACK WIRE
https://murrays.com/products/nacra-5-0-jib-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N5.0-5.2-jib-halyard-with-shackle-and-pulley.jpg?v=1676950075
N-5.0 JIB HALYARD W/SHACKLE
https://murrays.com/products/n6-0na-shroud-5-32-black-roller-swaged
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_6bfd87b1-1d4f-4f77-8cd1-f33d5b93a3c1.jpg?v=1676950076
N-6.0NA SHROUD 5/32" BLACK WIRE ROLLER SWAGED
N6.0 North American Shroud 5/32" Black Wire Roller Swaged
Murrays Part# 002-4705-12
Single black shroud for Nacra 6.0NA (North American) is hydraulically swaged to be clean and strong. Constructed to factory specifications. Length: 24' 4" pull-to-pull.
To help differentiate between the standard Nacra 6.0 and Nacra 6.0 NA, please note that the standard Nacra 6.0 came stock with a shorter mast and without a bridle foil. The Nacra 6.0 NA came stock with a longer mast and included a bridle foil.
https://murrays.com/products/nacra-5-2-jib-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N5.0-5.2-jib-halyard-with-shackle-and-pulley_dd593592-bc8c-478b-92f7-b19678fd8130.jpg?v=1676950077
N-5.2 JIB HALYARD WITH SHACKLE
https://murrays.com/products/nacra-5-0-main-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N5.0-5.2-5.7-5.5SL-main-halyard-with-shackle-and-stop_538989e1-0349-46a1-a0fb-93565358d6bc.jpg?v=1676950077
N-5.0 MAIN HALYARD WITH SHACKLE
https://murrays.com/products/nacra-5-2-main-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N5.0-5.2-5.7-5.5SL-main-halyard-with-shackle-and-stop_7b72fbac-6fa3-4512-9a34-1efcd191e132.jpg?v=1676950079
N-5.2 MAIN HALYARD WITH SHACKLE
https://murrays.com/products/nacra-5-5sl-jib-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N-5.7-5.5SL-5.8-jib-halyard-with-shackle-and-pully-with-becket_6ff3d298-8dcd-48a6-84d4-009c9bd2370c.jpg?v=1676950080
N-5.5SL JIB HALYARD WITH SHACKLE
https://murrays.com/products/nacra-5-7-jib-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N-5.7-5.5SL-5.8-jib-halyard-with-shackle-and-pully-with-becket_2a4ac14e-09cc-4fa7-9224-3cbe02f5b9ab.jpg?v=1676950081
N-5.7 JIB HALYARD W/SHACKLE
https://murrays.com/products/nacra-5-5sl-main-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N5.0-5.2-5.7-5.5SL-main-halyard-with-shackle-and-stop_c5af23e7-1d03-4add-8c3f-0df8db2480e9.jpg?v=1676950082
N-5.5SL MAIN HALYARD WITH SHACKLE
https://murrays.com/products/nacra-6-0na-jib-halyard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N6.0-6.0-NA-Jib-halyard-with-shackle.jpg?v=1676950083
N-6.0/NA JIB HALYARD
https://murrays.com/products/nicopress-oval
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/oval_220e32ec-7c4e-4e7b-9e69-b80ec5f37f31.jpg?v=1733349300
NICOPRESS OVAL 1/16" COPPER/ZINC
Nicopress Oval 1/16" Copper/Zinc
Murrays Part# 002-1020
Nicopress Oval- Locks wire rope to a thimble terminal. Close with an appropriate swaging tool for maximum strength. Each.
https://murrays.com/products/nacra-inter-17-shroud-roller-swaged-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Thimble-MarineEye-PTP.jpg?v=1676950085
NACRA INTER 17 SHROUD 1/8" ROLLER SWAGED
Nacra Inter 17 Shroud Roller Swaged
Murrays Part# 002-5204-12
Because the manufacturer's specifications vary, a pull-to-pull length is required to ensure correct length for your boat.
https://murrays.com/products/nut-hex-ms-6-32-brass
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2010.jpg?v=1734553156
HEX NUT #6-32 (BRASS)
Nut Hex MS #6-32 (Brass)
Murrays Part# 19-2010
Brass hex nut fits Pocket Protector kits #01-1001 and #01-1002. Measurements are diameter and threads per inch.
https://murrays.com/products/nut-hex-ms-8-32-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2016.jpg?v=1734547355
HEX NUT MS #8-32 (SS)
Nut Hex MS #8-32 Stainless Steel
Murrays Part# 19-2016
Stainless steel #8-32 hex nut. Measurements are diameter and threads per inch. Compare to Hobie Cat® #8050801.
https://murrays.com/products/nut-hex-ms-8-32-white-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2020WH.jpg?v=1676950091
NUT HEX MS #8-32 (WH NYLON)
Nut Hex MS #8-32 (White Nylon)
Murrays Part# 19-2020WH
White nylon #8-32 nut used for installation of ports.
https://murrays.com/products/nut-nylock-10-32-stainless-steel-thick
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2515.jpg?v=1676950093
NUT NYLOCK #10-32 (SS) THICK
Nut Nylock #10-32 Stainless Steel Thick
Murrays Part# 19-2515
Mainsheet block replacement nut. The stainless hex nut with nylock insert will not rust or work loose if properly installed.
Fits Hobie Main Traveler Car.
Fits Hobie Tiller Hinge Screw.
Fits Hobie Masthead Sheave Screw H16 Hobie Getaway
Compare to Hobie Part Number 8050201
https://murrays.com/products/nut-nylock-1-4-20-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2520-nylock-nut.jpg?v=1676950093
NYLOCK NUT 1/4-20 SS
Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras.
Applications:
Hobie 18 / H18:
Bow Tang Nut Qty: 6
Rudder Adjustment: 1
Hobie Getaway: Forestay Yoke Nut
https://murrays.com/products/nut-nylock-1-2-13-stainless-steel-thin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/low-profile-nylock-nut.jpg?v=1676950095
NUT NYLOCK 1/2-13 (SS) THIN
Nut Nylock 1/2-13" Stainless Steel Thin
Murrays Part# 19-2531
Thin stainless steel 1/2-13 hex nut with nylock insert will not rust or work loose if properly installed. Used on 1/2" pylon bolt on most older Hobie 16's (changed to 3/8" in 1994). Equivalent to Hobie #8050631.
https://murrays.com/products/nut-nylock-3-8-16-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2524-2.jpg?v=1676950097
NUT NYLOCK 3/8-16" (SS)
Nut Nylock 3/8-16" Stainless Steel
Murrays Part# 19-2524
Stainless 3/8-16 hex nut with nylock insert will not rust or work loose if properly installed. Used on newer (1994) Hobie 16 pylon bolt.
Hobie Part# 8050521
https://murrays.com/products/nut-nylock-5-16-18-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2520-nylock-nut_10fb136c-9c94-4419-ad9a-2537e41f054e.jpg?v=1676950097
NUT NYLOCK 5/16-18 (SS)
Nut Nylock 5/16-18 Stainless Steel
Murrays Part# 19-2520
5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut
Used with Hobie Getaway Bow Tang Bolt
https://murrays.com/products/nut-nylock-8mm-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2520-nylock-nut_ff11e9a2-b369-4291-9665-7a636f66670a.jpg?v=1676950098
NUT NYLOCK 8mm (SS)
Nut Nylock 8mm Stainless Steel
Murrays Part# 19-2522
Stainless hex nut with Nylock insert will not rust or work loose if properly installed.
https://murrays.com/products/o-ring-for-4-screw-in-port
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-4210OR_6_inch_port_o_ring.jpg?v=1721231062
O-RING: 4" SCREW-IN PORT
O-Ring: 4" Screw-In Port
Murrays Part# 001-1161OR
This is an approximate O-Ring for Viking Marine 4" ports.
https://murrays.com/products/o-ring-for-5-screw-in-port
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/o-ring_4aa4476e-4bb6-4db1-9a41-88426a0be6ee.jpg?v=1721236912
O-RING 5" SCREW-IN
O-Ring 5" Screw-In
Murrays Part# 001-1171OR
This is an approximate replacement for Viking Port O-Rings for 5" ports.
https://murrays.com/products/o-ring-for-6-screw-in-port
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-4210OR_6_inch_port_o_ring_21a0552d-598a-41b2-9721-87e60ea87687.jpg?v=1722263119
O-RING: 6" SCREW-IN PORT
O-Ring: 6" Screw-In Port
Murrays Part# 001-4210OR
Replacement “O” ring for 6″ port (hatch) #01-4210. Viking, Sea Dog
https://murrays.com/products/oxen-becket-clevis-pin-3-16-x-1-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-18.jpg?v=1676950105
OXEN BLOCK BECKET CLEVIS PIN
Oxen Block Becket Clevis Pin 3/16 X 1-1/4"
Length: 3/16 X 1-1/4
https://murrays.com/products/oxen-becket-mounting-strap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-14.jpg?v=1676950107
OXEN BLOCK BECKET MOUNTING STRAP
Oxen Block Becket Mounting Strap
Murrays Part# 005-0761-14
https://murrays.com/products/oxen-becket-strap-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0766.jpg?v=1676950107
OXEN BLOCK BECKET STRAP KIT
Oxen Block Becket Strap Kit
Murrays Part# 005-0766
https://murrays.com/products/oxen-becket-roller-oxen
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-17.jpg?v=1676950109
OXEN BLOCK BECKET ROLLER
Oxen Block Roller Becket
Murrays Part# 005-0761-17
https://murrays.com/products/oxen-block-3-with-pin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/oxen_block.jpg?v=1736268490
OXEN BLOCK WITH PIN
Oxen blocks are the ultimate high tech, self-holding jib blocks that offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use. Expensive, but the best is rarely cheap!
https://murrays.com/products/oxen-block-3-with-pin-becket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/OXEN_3_BLOCK_W_PIN_amp_BECKET.jpg?v=1736269034
3" OXEN BLOCK WITH PIN & BECKET
Oxen self-holding blocks offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use.
https://murrays.com/products/oxen-becket-strap-seal
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-becket_breakdown.jpg?v=1676950111
OXEN BLOCK BECKET SEAL STRAP
Oxen Block Becket Seal Strap
Murrays Part# 005-0761-19
https://murrays.com/products/oxen-face-plate
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-0761-08.jpg?v=1676950113
OXEN BLOCK FACE PLATE
Oxen Face Plate
Murrays Part# 005-0761-08
REBUILDING OXEN BLOCKS
Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. We regret that our technician is not available to answer rebuilding questions.
https://murrays.com/products/oxen-hub-center-screw-2-piece
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-01.jpg?v=1676950115
OXEN BLOCK HUB CENTER SCREW (2-PC)
REBUILDING OXEN BLOCKS
Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. We regret that our technician is not available to answer rebuilding questions. The following information is provided so that you can make an informed decision about the re
https://murrays.com/products/oxen-c-clip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-11.jpg?v=1676950115
OXEN BLOCK C CLIP
Oxen C Clip
005-0761-11
REBUILDING OXEN BLOCKS
Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. We regret that our technician is not available to answer rebuilding questions.
https://murrays.com/products/oxen-inner-hub-assembly
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-07.jpg?v=1676950118
OXEN BLOCK INNER HUB ASSEMBLY
Oxen Block Inner Hub Assembly
Murrays Part# 005-0761-07
https://murrays.com/products/oxen-o-ring-seal-center-screw
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-02.jpg?v=1676950119
OXEN BLOCK O-RING SEAL(CENTER SCREW)
O-Ring Seal (Center Screw)
Murrays Part# 005-0761-02
REBUILDING OXEN BLOCKS
Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed.
https://murrays.com/products/oxen-outer-hub-lock-ring
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-06.jpg?v=1676950119
OXEN BLOCK OUTER HUB LOCK RING
Oxen Outer Hub Lock Ring
Murrays Part# 005-0761-06
https://murrays.com/products/oxen-o-ring-for-face-plate
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-05.jpg?v=1676950121
OXEN BLOCK O-RING FACE PLATE
Oxen Block O-Ring Face Place
Murrays Part# 005-0761-05
https://murrays.com/products/oxen-sheave-main-body
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-04.jpg?v=1676950123
OXEN BLOCK MAIN BODY SHEAVE
Sheave Main Body
Murrays Part# 005-0761-04
REBUILDING OXEN BLOCKS
Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed.
https://murrays.com/products/oxen-sheave-self-locking
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-00.jpg?v=1676950123
OXEN BLOCK SELF-LOCKING SHEAVE
Oxen Sheave Self-Locking
Murrays Part# 005-0761-00
https://murrays.com/products/oxen-teflon-washer
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-13.jpg?v=1676950125
OXEN BLOCK TEFLON WASHER
Oxen Block Teflon Washer
Murrays Part# 005-0761-13
https://murrays.com/products/oxen-v-ring-seal-hub
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-03.jpg?v=1676950127
OXEN BLOCK V-RING SEAL HUB
V-Ring Seal Hub
Murrays Part# 005-0761-03
https://murrays.com/products/oxen-spring-trip-lever-return
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-becket_breakdown-1.jpg?v=1676950127
OXEN SPRING TRIP LEVER RETURN
https://murrays.com/products/p16-main-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Prindle_16_main_halyard_wire.jpg?v=1733169834
PRINDLE 16 MAIN HALYARD WITH SHACKLE
The Murrays Prindle 16 main halyard is made to factory specs. We use 316 stainless steal bare wire and thimbles. It also has a Ronstan Halyard Shackle with a captive pin so that it will not fall out when loosened.
Prindle part number 9026
https://murrays.com/products/p16-trapeze-wires-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/PRIONDLE_16_Single_TRAPEZE_WIRE.jpg?v=1733249447
PRINDLE 16 TRAPEZE WIRES (2)
The Murrays Prindle Trapeze Wires are a set of 2 black or white coated trap wires with 2 handles for trapezing. Order shock cord, harness loops and adjustment kits separately.
https://murrays.com/products/p16-upper-forestay-1-8-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2234-00.jpg?v=1676950135
PRINDLE 16 UPPER FORESTAY 1/8" BARE WIRE
P16 Upper Forestay 1/8" Bare Wire
Murrays Part# 002-2234-00
Upper forestay for Prindle 16 is constructed of bare 1/8" wire to factory specifications.
https://murrays.com/products/p16-p18-jib-block-wire
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2224-00.jpg?v=1676950135
PRINDLE 16/18 JIB BLOCK WIRE
Prindle 16, P18 Jib Block Wire
Murrays Part# 002-2224-00
Jib block wire for Prindle 16 or 18 is constructed to factory specifications. A swaging tool is needed for installation.
https://murrays.com/products/p18-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2315-02.jpg?v=1676950139
PRINDLE 18 BRIDLE 5/32" BLACK WIRE
P18 Bridle 5/32" Black
Murrays Part# 002-2315-02
One black bridle for Prindle 18 is constructed to factory specifications.
https://murrays.com/products/p18-upper-forestay-5-32-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2335-00.jpg?v=1676950139
PRINDLE 18 UPPER FORESTAY 5/32 BARE
https://murrays.com/products/p18-forestay-5-32-black-with-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Prindle_801a5fe4-855a-4d18-a8dc-f28e658a6ee0.jpg?v=1676950140
PRINDLE 18 FORESTAY 5/32" BLACK WIRE WITH TURNBUCKLE
Prindle 18 Forestay 5/32" Black with Turnbuckle
Murrays Part# 002-2345-42
Forestay with turnbuckle for Prindle 18 is constructed to factory specifications.
https://murrays.com/products/p18-shroud-5-32-black-roller-swaged
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_a0f7b5ac-58c0-492c-8ae5-aba05d3481d7.jpg?v=1676950142
PRINDLE 18 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
Prindle 18 Shroud 5/32" Black Wire Roller Swaged
Murrays Part# 002-2305-12
One single black shroud (sidestay) for Prindle 18 is constructed to factory specifications. Hydraulic swaging produces a cleaner, stronger shroud.
https://murrays.com/products/p18-p18-2-diamond-wire-with-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireNacPrin_097fe8e7-d1a8-4b40-b86f-42d0fa340582.jpg?v=1676950143
PRINDLE 18/18.2 DIAMOND WIRE WITH TURNBUCKLE
Prindle diamond wire
https://murrays.com/products/p18-2-forestay-5-32-black-with-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Prindle_9dd388eb-0644-40e9-a5fa-6fb096ecc7cc.jpg?v=1676950143
PRINDLE 18.2 FORESTAY 5/32"BLACK WIRE WITH TURNBUCKLE
Prindle 18.2 Forestay 5/32" Black Wire with Turnbuckle
Murrays Part# 002-2545-42
Forestay with turnbuckle for Prindle 18.2 is constructed to factory specifications.
https://murrays.com/products/p18-2-upper-forestay-5-32
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2335-00_3d466870-882b-46e9-9109-2957bec25360.jpg?v=1676950146
PRINDLE 18.2 UPPER FORESTAY 5/32
Prindle upper forestay
https://murrays.com/products/p18-2-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2415-22_c59e6e77-26a3-457b-90b6-35081670b825.jpg?v=1676950147
PRINDLE 18.2 BRIDLE 5/32-BLACK
https://murrays.com/products/p18-2-shroud-5-32-black-roller-swaged
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_92e8c970-a2d2-4d6e-8837-85f456ab01cd.jpg?v=1676950147
PRINDLE 18.2 SHROUD 5/32' BLACK WIRE ROLER SWAGED
https://murrays.com/products/p18-2-p19-jib-block-wire-4-way
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2424-20.jpg?v=1676950147
PRINDLE 18.2/19 JIB BLOCK WIRE 4-WAY
https://murrays.com/products/p19-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2415-22_Prindle_Bridle_wire.jpg?v=1745874030
PRINDLE 19 BRIDLE 5/32 BK
Prindle bridle wire
https://murrays.com/products/p19-forestay-5-32-black-with-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Prindle_19.jpg?v=1745873987
PRINDLE 19 FORESTAY 5/32"BLACK WIRE WITH TURNBUCKLE
Prindle 19 Forestay 5/32" Black Wire with Turnbuckle
Murrays Part# 002-2445-42
Forestay with turnbuckle for Prindle 19 is constructed to factory specifications.
https://murrays.com/products/p19-shroud-5-32-black-roller-swaged
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_68738490-d804-434a-a518-cfe7f31cb897.jpg?v=1676950151
PRINDLE 19 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
P19 Shroud 5/32" Black Wire Roller Swaged
Murrays Part# 002-2405-12
Single black shroud (sidestay) for Prindle 19 is hydraulically swaged for a cleaner, stronger shroud. Constructed to factory specifications.
https://murrays.com/products/p19-upper-forestay-5-32-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2335-00_a2c06878-7311-4156-97e3-8c89b44c5064.jpg?v=1676950154
PRINDLE 19 UPPER FORESTAY 5/32" BARE WIRE
P19 Upper Forestay 5/32" Bare Wire
Murrays Part# 002-2435-00
Bare upper forestay for Prindle 19 is constructed to factory specifications.
https://murrays.com/products/p19-diamond-wire-with-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Diamond-Wire-Nacra-Prindle.jpg?v=1745866442
PRINDLE 19 DIAMOND WIRE WITH TURNBUCKLE
Prindle 19 Diamond Wire with Turnbuckle
Murrays Part# 002-2494-20
Diamond wire with turnbuckle for Prindle 19 is constructed to factory specifications.
Prindle part# 9879
https://murrays.com/products/p-escape-bridle-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2415-22_221de7c4-ee24-47ae-b18b-b437233fcb5d.jpg?v=1676950155
PRINDLE ESCAPE BRIDLE 5/32-BLACK
https://murrays.com/products/p-escape-forestay-5-32-with-turnbuckle-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2645-42.jpg?v=1676950155
PRINDLE ESCAPE FORESTAY 5/32 WITH TURN BUCKLE-BLACK
https://murrays.com/products/p-escape-shroud-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2605-02.jpg?v=1676950158
PRINDLE ESCAPE SHROUD 5/32 BLACK
https://murrays.com/products/pins-rings-kit-h17-h20-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3522.jpg?v=1676950159
H-17/20/NACRA PINS AND RINGS KIT
clevis pins with split rings for the standing rig and mast stepping systems of Hobie 17, Hobie 20, or Nacra.
Kit includes 18 pieces: mast hinge pin, clevis pin assortment, and split ring assortment.
Compare to Hobie Cat #30317.
https://murrays.com/products/pins-rings-kit-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-4031.jpg?v=1676950159
H-18 PINS & RINGS KIT
Hobie 18 clevis pin kit includes 13 pieces: mast hinge pin, clevis pin assortment, and split ring assortment.
Compare to Hobie Part Number #30304
Murrays.com
https://murrays.com/products/pins-rings-kit-hobie-14-hobie-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3031.jpg?v=1676950159
H-14/16 PINS AND RINGS KIT
Kit for Hobie® 14 or 16 includes 16 pieces: mast hinge pin, clevis pin assortment and split ring assortment.
Compare to Hobie Cat® #30303.
https://murrays.com/products/pins-rings-kit-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-5031.jpg?v=1676950162
PRINDLE PINS & RINGS KIT
Prindle split rings and clevis pin kit, mast hinge pin
https://murrays.com/products/plug-for-aluminum-stick
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-0064.jpg?v=1730309588
PLUG FOR ALUMINUM STICK
Plug for Aluminum Stick
Murrays Part# 001-0064
15/16"Outer Dimension plug fits the Murrays Aluminum Hiking Stick.
https://murrays.com/products/power-downhaul-kit-h18-5-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/HOBIE_18_POWER_DOWNHAUL_KIT_-_5_1.jpg?v=1732301962
H-18 5:1 POWER DOWNHAUL KIT
HOBIE 18 POWER DOWNHAUL KIT - 5:1
Get powerful downhaul adjustment from any sailing position. This Class-legal, 5:1 downhaul kit for Hobie® 18 includes a space-saving bracket with becket, two Harken bullet cheek blocks, Harken pivoting exit block with micro cleat, Harken double bullet block, trim line, fasteners and instructions.
https://murrays.com/products/power-righting-system-i
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/IMG_0456.jpg?v=1676950167
POWER RIGHTING SYSTEM I
Power Righting System I
Murrays Part# 13-4101
https://murrays.com/products/power-righting-sytem-without-pole
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/IMG_0455.jpg?v=1728495355
POWER RIGHTING SYSTEM WITHOUT POLE
https://murrays.com/products/pwc-footstrap-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2020.jpg?v=1676950168
PWC FOOTSTRAP KIT (PR)
PWC Footstrap Kit
Murrays Part# 001-2020
The PWC Footstrap Kit includes a pair of footstraps, twist control system and fasteners.
A pre-formed arch prevents collapsing, so your foot slides right in and is cradled by the comfortable 7mm neoprene padding.
Sold in pairs
https://murrays.com/products/quick-release-pin-detent-1-4-x-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/18-4D100.jpg?v=1725901779
QUICK RELEASE PIN DETENT 1/4 X 1"
Quick Release Pin Detent 1/4 X 1"
Murrays Part# 18-4D100
This quick pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measures 1/4" diameter x 1" long.
Can be used to replace 1/4" clevis pins up to 1" long. Not recommended for use in shroud adjusters or chain plates.
https://murrays.com/products/quick-release-bow-shackle-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3232.jpg?v=1676950170
QUICK RELEASE 1/4" BOW SHACKLE
Hobie 3062 1/4" Bow shackle with quick release pin
https://murrays.com/products/quick-release-bow-shackle-3-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3233.jpg?v=1676950172
QUICK RELEASE 3/16" BOW SHACKLE
Replace a 3/16" bow shackle with this quick-release version to add convenience. Can be used on 2-1/4" blocks. Compare to Hobie Cat® #3062.
https://murrays.com/products/quick-release-convenience-package-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3231.jpg?v=1676950172
H-16 QUICK RELEASE CONVENIENCE PACKAGE
Quick-Release Convenience Package: H16
Murrays Part# 001-3231
This package makes set-up and take-down of your Hobie 16® more convenient.
Kit includes:
One #18-4R125 Quick Release Pin for hiking stick to crossbar connection.
One #18-3M075L Quick Release Pin with Lanyard for mainsheet block to traveler car connection.
One #21-1032 Quick Twist Halyard Shackle for jibsheet blocks to jib clew boom to mast connection.
One #21-1155L Toggle Pin with Lanyard for forestay to adjuster connection.
Four #01-0127 Car
https://murrays.com/products/quick-release-pin-deluxe-1-4-x-1-1-2-with-lanyard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m125L-1.jpg?v=1676950174
QUICK RELEASE DELUXE PIN 1/4 X 1-1/2" WITH LANYARD
Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard
Murrays Part# 18-4M150L
This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place.
This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin,
Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP
Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
https://murrays.com/products/quick-release-pin-deluxe-1-4-x-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m100-1.jpg?v=1676950174
QUICK RELEASE DELUXE PIN 1/4 X 1"
Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings).
Uses:
Hobie boom Gooseneck quick connection pin on the 14, 16 and 18.
Hobie 18 main clew to outhaul car connection pin.
Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP
Upgrade for Hobie Part# 8020410 and 8020411 clevis pin
https://murrays.com/products/quick-release-pin-deluxe-1-4-x-1-1-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m150-1.jpg?v=1676950175
DELUXE QUICK RELEASE PIN 1/4 X 1.5"
Deluxe Quick Release Pin 1/4 X 1.5" Murrays Part# 18-4M150
This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Also available with a lanyard, see related items below.
Quick pins are ideal for replacing clevis pins in areas that you would like to be able to quickly connect and disconnect. Uses: Hobie 18 mast hinge pin
Compare to Hobie part# 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 802
https://murrays.com/products/quick-release-pin-deluxe-1-4-x-1-with-lanyard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m100L.jpg?v=1676950176
DELUXE QUICK RELEASE PIN 1/4 X 1" WITH LANYARD
Deluxe Quick Release Pin 1/4 X 1 with Lanyard
Murrays Part# 18-4M100
This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses:
Hobie boom Gooseneck quick connection pin on the 14, 16 and 18.
Hobie 18 main clew to outhaul car connection pin.
Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP
Upgrade for Hobie 8020410 and 8020411 clevis pin
https://murrays.com/products/quick-release-pin-deluxe-1-4-x-1-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m125-1.jpg?v=1676950178
QUICK RELEASE DELUXE PIN 1/4 X 1-1/4"
Quick Release Deluxe Pin 1/4 X 1.25"
Murrays Part# 18-4M125
This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Also available with a lanyard, see related items below.
Uses:
This pin is recommended for connection of hiking stick to crossbar on all Hobie, Nacra and Prindle catamarans.
Also used on Hobie 18 SX and Hobie Magnum wings.
Compare to Hobie part# 20306 PIN, QR 1/4 X 1-1/4 CUP
https://murrays.com/products/quick-release-pin-deluxe-1-4-x-3-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m075-1.jpg?v=1676950178
QUICK RELEASE DELUXE PIN 1/4 X 3/4"
Quick-Release Pin Deluxe 1/4 X 3/4
Murrays Part# 18-4M075
This economical pin features a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. The pin is also available with a lanyard to help prevent loss of pin (see related items below). Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to the locking ball bearings). Compare to Hobie Cat® #20302.
https://murrays.com/products/quick-release-pin-deluxe-1-4-x-1-1-4-with-lanyard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m125L-1_6cba6aca-8872-4918-b46a-6e142d1d1c8d.jpg?v=1676950180
QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
Quick Release Pin 1/4 X 1-1/4 with Lanyard
Murrays Part# 18-4M125L
https://murrays.com/products/quick-release-pin-deluxe-1-4-x-3-4-with-lanyard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m075L-1.jpg?v=1676950180
QUICK RELEASE PIN 1/4 X 3/4" WITH LANYARD
Quick-Release Pin Deluxe 1/4 X 3/4 with Lanyard
Murrays Part# 18-4M075L
This aircraft quality quick-release pin features a deluxe dished head. No other locking pin is faster operating or safer. Stainless 1/16" x 7" lanyard stainless lanyard is secured on one end with a nicropress oval; the other end is left open so that you can secure with included nicropress oval after attaching the lanyard to your chosen location. Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to
https://murrays.com/products/quick-release-pin-deluxe-3-16-x-3-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-3m075-2.jpg?v=1676950182
QUICK RELEASE PIN DELUXE 3/16 X 3/4"
Quick Release Pin Deluxe 3/16 X 3/4"
Murrays Part# 18-3M075
This Quick Release Pin features 2 locking balls for a extra secure grip, and a push button deluxe dished head with a hole for lanyard attachment. The Deluxe pin is quick and easy to remove and install, and makes getting on and off the water quicker and easier.
https://murrays.com/products/quick-release-pin-detent-1-4-x-3
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/18-4D300.jpg?v=1737143876
QUICK RELEASE DETENT PIN 1/4 X 3"
Quick Release Detent Pin 1/4 X 3"
Murrays Part# 18-4D300
Economical quick release pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release.
Measurements are 1/4" diameter x 3" maximum grip length (distance from the shoulder to the locking ball bearings).
Uses:
- Use as mast step pin on Hobie® 21 and Prindle 16/18/18-2/19 cats.
Compare to Hobie part # 8020501
https://murrays.com/products/replaceable-trap-handle-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-2010.jpg?v=1676950191
REPLACABLE ALUMINUM TRAP HANDLE
Replaceable Aluminum Trap Handle
Murrays Part# 007-2010
Foam-covered aluminum handle is easily installed onto existing trapeze wire. Carry a spare as a temporary repair, then replace the wire at your convenience. Each.
Hobie Cat® Part# 2010
https://murrays.com/products/replacement-sheave-prindle-rudder-upper
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-1741.webp?v=1718994663
RONSTAN 19MM ACETAL SHEAVE, 6MM WIDTH
Replacement Sheave Prindle Rudder Upper
Ronstan PN RF1741
Replacement sheave for upper part of rudder casting on all models of Prindle catamarans. Replacement for Performance Sports item #4009. 1/4" wide x 3/4" diameter, 1/4" hole.
https://murrays.com/products/replacement-double-button-3-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/03-0219.jpg?v=1676950193
REPLACEMENT DOUBLE BUTTON 3/8
https://murrays.com/products/replacement-vane-for-hobie-bridle-vane
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/004-7704.jpg?v=1734645315
REPLACEMENT HOBIE WIND VANE
REPLACEMENT HOBIE WIND VANE
Hobie part number CM7703
https://murrays.com/products/rigging-tape-1x-15-white
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-3460.jpg?v=1676950195
RIGGING TAPE 1"X 15' WHITE
Rigging Tape 1"X 15' White
Murrays Part# 010-3460
Protects against chafing and sharp edges while providing safety for sails, lines and rope ends. This self-bonding tape is waterproof and leaves no sticky residue. 1" x 15 feet.
https://murrays.com/products/ring-stainless-steel-welded-1-8x3-4id
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-3320.jpg?v=1706562705
RING SS WELDED 1/8"x3/4"ID
Ring Stainless Steel Welded 1/8"x3/4"ID
https://murrays.com/products/righting-bag-only-200-lbs
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3282-2013.jpg?v=1676950197
RIGHTING BAG ONLY (200+LBS)
Righting Bag Only (200+LBS)
Murrays Part# 001-3282
This is the bag only from Murrays' popular Cat Righting Big Bag System (#01-3280). The 18" x 32" bag attaches with hook and loop straps under the tramp for easy use and storage. The theoretical maximum capacity of the bag is 250 lbs.
https://murrays.com/products/ring-1-4-x-2-diameter-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/25-3050-300x300.jpg?v=1738958985
RING: 1/4 X 2" DIAMETER (SS)
Ring: 1/4 X 2 Diameter
(Stainless Steel)
Murrays Part# 25-3050
1/4" x 2" stainless ring can be used for Prindle-style jib halyards.
https://murrays.com/products/ring-welded-3-16-x-1id-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-3535.jpg?v=1771263631
RING SS WELDED 3/16"x 1" ID
https://murrays.com/products/ring-3-8-x-2-id-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-190570.jpg?v=1676950199
RING 3/8 X 2" (NYLON)
Ring 3/8 X 2" (Nylon)
Murrays Part# 27-190570
3/8" nylon ring has an inside diameter of 2 inches.
https://murrays.com/products/rivet-aap-6-6-3-16-x-3-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5012.jpg?v=1676950200
RIVET AAP 6-6 (3/16 X 3/8)
Rivet AAP 6-6 (3/16 X 3/8)
Murrays Part# 19-5012
A rivet gun is required for installation of this 3/16" x 3/8" aluminum pop rivet.
https://murrays.com/products/rivet-aap-6-10-3-16-x-5-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5014.jpg?v=1676950200
RIVET AAP 6-10 (3/16 X 5/8)
Rivet AAP 6-10 (3/16 X 5/8)
Murrays Part# 19-5014
A rivet gun is required for installation of this 3/16" x 5/8" aluminum pop rivet
https://murrays.com/products/rivet-aap-6-4-3-16-x-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5011.jpg?v=1676950203
RIVET AAP 6-4 (3/16 X 1/4)
Rivet AAP 6-4 (3/16 X 1/4)
Murrays Part# 19-5011
A rivet gun is required for installation of this 3/16" x 1/4" aluminum pop rivet.
https://murrays.com/products/rivet-casing-6-10-3-16-x-1-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5020.jpg?v=1676950204
RIVET CASING 6-10(3/16 X 5/8)
Hobie rivet casings sleeves seal rivets to prevent water penetration. When used with a rivet they seal the hole to prevent water from getting through the center of the rivet. Rivet Casings are recommended for use on all rivets on the mast to keep the mast water tight. Compatible with all 3/16 diameter rivets up to 5/8" long. Compatible with all rivets on Hobie, Nacra and Prindle catamarans except traveler tracks. Requires 13/64" hole. Hobie part number 8011291, 8011290, also called rivet cap.
https://murrays.com/products/rivet-ccc-6-4-3-16-x-1-4-countersunk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5021.jpg?v=1676950204
RIVET CCC 6-4 (3/16 X.25 CSK)
RIVET CCC 6-4 (3/16 X.25 CSK)
Murrays Part# 19-5021
This size stainless steel countersunk rivet.
002-1041 stop sleeve is helpful for track instillation as a spacer to fit into the track to help get the rivet flush.
https://murrays.com/products/rivet-ccc-6-6-3-16-x-3-8-countersunk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/19-5024_2.jpg?v=1721243983
RIVET CCC 6-6 CSK
Rivet CCC 6-6 (3/16 X 3/8) Countersunk
Murrays Part# 19-5024
Countersunk stainless steel 3/16" x 3/8" rivet for traveler tracks, etc.
Compare to Hobie Part # 8010201.
This rivets is what Hobie recommends for both the main traveler tack and the jib traveler track.
We also recommend using an 1/8" stop sleeve, part number 002-1041, as a spacer to help you apply pressure on the rivet inside the track, as the track is too narrow for most rivet guns to get far enough inside to apply pressure to the rivet.
https://murrays.com/products/rivet-ccp-4-6-1-8-x-3-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5030.jpg?v=1676950208
RIVET CCP 4-6 (1/8 X 3/8)
Rivet CCP 4-6 (1/8 X 3/8)
Murrays Part# 19-5030
Stainless steel 1/8" x 3/8" rounded pan head rivet.
https://murrays.com/products/rivet-ccp-6-6-3-16-x-3-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5032.jpg?v=1676950208
RIVET CCP 6-6 (3/16 X 3/8)
RIVET CCP 6-6 (3/16 X 3/8)
Murrays Part# 19-5032
Stainless steel 3/16" x 3/8" pan head rivet
Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified:
Hobie 14 (2) or 16 (4) mast head
Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4)
Hobie 14/16 rudder upper casting (2)
Hobie 14/16 tiller end cap (2)
Hobie 14/16 boom front end cap (3)
Pair with stainless steal rivet casings to seal the holes when using on the mast.
https://murrays.com/products/rivet-ccp-6-4-3-16-x-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5031.jpg?v=1676950209
RIVET CCP 6-4 (3/16 X 1/4)
Rivet CCP 6-4 (3/16 X 1/4)
Murrays Part# 19-5031
Stainless steel 3/16" x 1/4" rounded pan head rivet. Compare to Hobie Cat® #8010181.
This is a common rivet used on many extrusions. Hobie, Nacra, Prindle masts and booms. Pair with a rivet casing to seal the rivet hole when used on masts.
All Hobie mast hounds, tangs, heads, and cheek blocks.
Used with Hobie Getaway Bow Spreader Plates
Used on Hobie Getaway FWD and REAR Crossbar Stop Plates
https://murrays.com/products/rivet-ccp-6-8-3-16-x-1-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5033.jpg?v=1676950211
RIVET CCP 6-8 (3/16 X 1/2)
Rivet CCP 6-8 (3/16 X 1/2)
Murrays Part# 19-5033
Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231.
https://murrays.com/products/rivet-mcp-6-6-3-16-x-3-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5022.jpg?v=1676950212
RIVET MCP 6-6
Rivet MCP 6-6 (3/16 X 3/8)
Murrays Part# 19-5022
Rounded pan head 3/16" x 3/8" Monel rivet. Compare to SS version Hobie Cat® #8010131.
https://murrays.com/products/rivet-ccp-6-10-3-16-x-5-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5034.jpg?v=1676950212
RIVET CCP 6-10 (3/16 X 5/8)
Rivet CCP 6-10 (3/16 X 5/8)
Murrays Part# 19-5034
Stainless steel 3/16" x 5/8" rounded pan head rivet. Compare to Hobie Cat® #8010121.
Halyard mast cleat rivet
https://murrays.com/products/rivet-mcp-8-6-1-4-x-3-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5042.jpg?v=1676950213
RIVET MCP 8-6 (1/4 x 3/8)
Rivet MCP 8-6 (1/4 x 3/8)
Murrays Part# 19-5042
Rounded pan head 1/4" x 3/8" Monel rivet.
https://murrays.com/products/rivet-msp-6-10-3-16-x-5-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5023.jpg?v=1676950216
RIVET MSP 6-10 3/16 X 5/8" PH
Rivet MSP 6-10 3/16 X 5/8" PH
Murrays Part# 19-5023
Rounded pan head 3/16" x 5/8" Monel rivet.
Compare to Hobie Cat® Part# 8010121
https://murrays.com/products/rivet-solid-a-6-6-3-16-x-3-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5006.jpg?v=1730310470
RIVET SOLID BRASS 6-6 (3/16x3/8")
RIVET SOLID BRASS 6-6 (3/16x3/8")
Solid Brass 3/16" x 3/8" rivet is designed to be set with a hammer. Commonly used to secure sail luff plates, clew plates, tack plates and headboards.
https://murrays.com/products/rivet-solid-a-4-6-1-8-x-3-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5005.jpg?v=1734554539
RIVET SOLID A 4-6 (1/8x3/8")
Rivet Solid A 4-6 (1/8 X 3/8)
Murrays Part# 19-5005
Solid aluminum 1/8" x 3/8" rivet is designed to be set with a hammer.
https://murrays.com/products/roller-fairlead-kit-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3002.jpg?v=1676950217
ROLLER FAIRLEAD KIT (SWIVEL)
https://murrays.com/products/roller-fairlead-roller
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/00-3002-4.jpg?v=1676950221
ROLLER FAIRLEAD ROLLER
Roller Fairlead Roller
Murrays part# 0100-3002-4
Replacement roller for #25-3002 roller fairlead.
https://murrays.com/products/ronstan-block-bullet-loop-top-linked
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-20284.jpg?v=1719333792
RONSTAN SERIES 20 BALL BEARING BLOCKS LINKED AT 90 DEGREES
Ronstan Series 20 Ball Bearing Block with Series 20 block linked at 90 Degrees
Murrays Part# 21-2028
As used on the Murrays No-Cut Hi-Low Trapeze Adjustment Kit. Precision molded Acetal sheaves run on stainless steel or Torlon® ball bearings to provide high performance and low friction.
The Ronstan back-to-back blocks have 3/4" sheaves and 1/4" maximum line diameter. Maximum working load is 550 lbs.; breaking load is 1210 lb. Weighs only 1.1 oz.
Ronstan part #RF20284.
https://murrays.com/products/ronstan-block-hanger
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0180.webp?v=1718899184
RONSTAN BLOCK HANGER
Ronstan Block Hanger
Murrays Part# 21-0180
The Ronstan block hanger enables you to hang a block from the boom. Constructed of grade 316 stainless steel, it measures about 3" length overall and has four 5mm (3/16") diameter fixing holes with 1" hole spacing. The block hanger is not a Hobie® factory replacement part, but it can be bent to fit your boom and holes can be drilled for your application. Use four #19-5031 6-4 rivets for installation. Weighs .7 oz. 64mm (2 1/2") long. 4 x 5mm (3/16") dia.
https://murrays.com/products/ronstan-block-kite-300-swl
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-13101.webp?v=1718991461
RONSTAN SERIES 15 KITE BLOCK, BLACK WITH WHITE SHEAVE
Ronstan Series 15 Kite Block, Black with White Sheave
Murrays Part# 21-13101
Ronstan's little block has twice the working load of their previous kite block (black RF668) with half the weight. Replace older, heavier blocks now! 300# SWL; Sheave diameter 5/8"; max. line size 5/32".
https://murrays.com/products/ronstan-block-midget-single-cheek
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0661.webp?v=1718983451
RONSTAN MIDGET SINGLE BLOCK (CHEEK)
Ronstan Series 20 Utility Block, Tube Rivet
Murrays Part# 21-0661
Rontan's cheek block is a Hobie® 18 and Prindle downhaul and turning block. Stainless steel cheeks and Acetal sheaves ensure a long service life with virtually no maintenance. Hollow rivets in the block heads can be fitted with shackles, which can also be used to add a becket for extra purchase.
https://murrays.com/products/ronstan-block-loop-top-single
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0571.webp?v=1718915160
PRINDLE LOOP TOP SINGLE BLOCK
https://murrays.com/products/ronstan-block-orbit-20mm-single-lashing-bullet
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/RF25109-with-rope.jpg?v=1676950229
ORBIT 20MM SINGLE LASHING
Orbit 20mm Single Lashing
Murrays part# 21-25109
Ronstan ball bearing Orbit Blocks™ boast the highest strength-to-weight ratio available, achieved through all-composite reinforced polymer materials and multiple attachment options. Use the 20mm BB for control lines on catamarans and dinghies to 16 feet (5m), especially downhaul, outhaul and spinnaker halyards.
https://murrays.com/products/ronstan-block-orbit-30mm-single-lashing-bullet
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-35101.webp?v=1719334917
RONSTAN SERIES 30 BALL BEARING ORBIT BLOCK, LASHING
Ronstan Series 30 Ball Bearing Orbit Block, Lashing
Murrays Part# 21-35101
Ronstan ball bearing Orbit Blocks™ boast the highest strength-to-weight ratio available, achieved through all-composite reinforced polymer materials and multiple attachment options. Ultra low profile through-sheave becket. Use for jib clew block.
https://murrays.com/products/ronstan-block-orbit-55mm-single-with-swivel-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-56100.webp?v=1719347058
RONSTAN SERIES 55 ORBIT BLOCK, RATCHET
Ronstan Series 55 Orbit Block™, Ratchet
Murrays Part# 21-56100
Now you can enjoy the flexibility of setting up your ratchet blocks to suit yourself. Ronstan is the only company that offers a ratchet block with both auto and manual engagement modes. In the auto mode of the ratchet mechanism engages when load is applied, but switches off when it's released. This lets the sheet run out smoothly and freely-great for rapid easing of the sheet and for gybing asymmetric spinnakers.
https://murrays.com/products/ronstan-block-orbit-30mm-single-with-swivel-and-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-35100.webp?v=1719334806
RONSTAN SERIES 30 BALL BEARING ORBIT BLOCK, BECKET AND SWIVEL SHACKLE
https://murrays.com/products/ronstan-block-single-bullet-20mm-with-swivel-shackle-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-2010.webp?v=1718994815
RONSTAN SERIES 20 BALL BEARING SINGLE BLOCK WITH SWIVEL SHACKLE
Ronstan Series 20 Ball Bearing Single Block with Loop Top
Murrays Part# 21-2010
Ronstan's 20mm single bullet block with swivel shackle head is lightweight and has low friction and a high static and dynamic load capacity. Precision molded Acetal sheaves running on stainless steel ball bearings provide high performance and low friction.
Materials include: Stainless steel ball bearings, UV-stabilized Acetal sheave, grade 316 stainless steel load strap and head fitting, and impact and UV -resistant
https://murrays.com/products/ronstan-block-small-fiddle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0186.webp?v=1718899340
RONSTAN SMALL FIDDLE BLOCK
Ronstan Series 30 Utility Block, Fiddle
Murrays Part# 21-0186
Use this Ronstan small fiddle block for 4:1 system for boom vangs or righting aids.
This is used for H16 Aussie Halyard Systems too
Fiddle block with tube rivets
https://murrays.com/products/ronstan-block-small-becket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0188.webp?v=1718899727
RONSTAN SMALL BECKET BLOCK
Ronstan Small Becket Block
Murrays Part# 21-0188
Use this Ronstan single block with becket for 3:1 system for boom vangs or righting aids. 1/4" line capacity. SWL 660 lbs.
https://murrays.com/products/ronstan-block-single-with-ferrule
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0469-1_a01714be-327a-4acc-ad14-cb773f2c7842.jpg?v=1744238480
RONSTAN SINGLE BLOCK WITH FERRULE
Ronstan Single Block, Ferrule
Murrays Part# 21-0469
This is the original clew block on most of the old Hobie cat Sailboats. This will work as a replacement jib clew block for Hobie® 14, 16 and 18 cats. Lightweight stainless block with ferrule has 1-1/8" x 5/8" sheave diameter, Delrin bearing and 1/2" line capacity. SWL: 950 lbs. This is a great option if you're looking to use a larger line diameter on your sheets or want the classic look.
https://murrays.com/products/ronstan-cam-cleat-c-cleat-medium
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5010.webp?v=1719340555
RONSTAN MEDIUM "C-CLEAT" CAM
Ronstan Medium "C-Cleat" Cam
Murrays Part# 21-5010
Lightweight and durable with quick response and easy entry/exit effort. Outstanding grip, corrosion resistant (no aluminum cams). Fast Track Fairlead option permits widest range of cleating angles without need for rotation. Saves complexity, weight and cost for barberhauler control cleats. 1/8" to 1/2" line; SWL 400 lbs.
https://murrays.com/products/ronstan-clear-start-race-timer
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Clearstart-race-timer.jpg?v=1676950241
RONSTAN CLEARSTART RACE TIMER 65MM
Ronstan Clearstart Race Timer 65mm
Murrays Part# 21-4030
Ronstan Clearstart™ Race Timer's are specifically designed with the racing sailor in mind, combining contemporary styling with true sailing functionality.
https://murrays.com/products/ronstan-cam-cleat-c-cleat-small
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-5000.jpg?v=1676950241
RONSTAN SMALL "C-CLEAT' CAM, GREY
https://murrays.com/products/ronstan-fairlead-forged-loop-1-7-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0134.webp?v=1718898453
RONSTAN FAIRLEAD FORGED "LOOP" 1-7/16
Ronstan Fairlead Forged "Loop"
1-7/16
Murrays Part# 21-0134
Grade 316 stainless steel replacement loop for #21-0371 Track Slide.
Specifications:
A = 9/16"
B = 3/16"
C = 1-7/16"
D = 3/16"
Weight 0.2 oz.
Hobie Part# 60330040
https://murrays.com/products/ronstan-eyestrap-with-ferrule-eye
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0499.webp?v=1718914573
RONSTAN EYESTRAP WITH FERRULE EYE
Ronstan Ferrule Eye 8mm Clearance
Murrays Part# 21-0499
Ronstan's grade 316 grade stainless steel eyestrap has a ferrule that guides line and provides a nice lead from any angle. Weighs 0.1 oz.
Measurements:
A = 3/8" ferrule eye diameter
B = 3/16" width
C = 1-1/8" distance between holes center-to-center
D = 5/32" hole diameter
Ronstan Part# RF499
https://murrays.com/products/ronstan-fairlead-fast-track-medium
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5015.webp?v=1719340775
RONSTAN FAIRLEAD FOR MEDIUM CAM CLEATS
Ronstan Fairlead for Medium Cam Cleats
Murrays Part# 21-5015
Ronstan's front-mounted fairlead is easily fitted to the T-Cleat and C-Cleat. It allows precise cleating and release from any lead angle. Lower entry efforts for off-center cleating. Will not catch lines or clothing. Constructed of tough, abrasion resistant composite material. Weight: .5 oz.
https://murrays.com/products/ronstan-furler-drum-2-5-fork-fork
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0076.webp?v=1718897325
Ronstan Furler Drum 2.5 Fork/Fork
https://murrays.com/products/ronstan-fairlead-fast-track-small
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5005.webp?v=1719340494
RONSTAN FAIRLEAD FOR SMALL CAM CLEATS, FRONT MOUNT
Ronstan Fairlead for Small Cam Cleats, Front Mount
Murrays Part# 21-5005
The small Fast Track fairlead is easily fitted to Ronstan's small C-Cleat (#21-5000) to allow precise cleating and release from any lead angle. Lower entry efforts for off-center cleating. Will not catch lines or clothing.
Ronstan Part# RF5005
https://murrays.com/products/ronstan-micro-single-loop-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-2011.webp?v=1718995005
RONSTAN SERIES 20 BALL BEARING SINGLE BLOCK WITH LOOP TOP
For kiteboarding, upgrade bow and flat kite bridle pulleys with Ronstan's micro pulleys to extend the life of your bridles and increase the working strength. 550 lb. working load.
https://murrays.com/products/ronstan-multi-purpose-tool
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-1320-1.jpg?v=1676950253
RONSTAN MULTI-PURPOSE TOOL
Ronstan Multi-Purpose Tool
Murrays Part# 21-1320
The Ronstan Multi-Purpose Tool is a screwdriver with two shackle sockets and wrench for #8, 10 and 1/4" nuts as well as metric nuts. The 3/4"- thick plastic body provides better grip than flat stainless tools. Suits both coined and slotted shackle pins, and small nylon-insert nuts
https://murrays.com/products/ronstan-orbit-55-jib-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-56130.webp?v=1719347222
RONSTAN SERIES 55 ORBIT BLOCK, RATCHET WITH BECKET AND CAM CLEAT
Ronstan Series 55 Orbit Block, Ratchet with Becket and Cam Cleat
Murrays Part# 21-56130
The Ronstan Orbit 55 Jib Block Ratchet Orbit Block™ has the highest holding power available and is ideal as a jib sheet cleat for the Hobie® 18, Hobie® 20, etc. The automatic ratchet mechanism engages when load is applied, but switches off when it's released.
https://murrays.com/products/ronstan-riser-pad-for-medium-c-cleats
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5016.webp?v=1719341868
RONSTAN CURVED SURFACE BASE/RISER FOR MEDIUM CAM CLEATS
Ronstan Curved Surface Base/Riser for Medium Cam Cleats
Murrays Part# 21-5016
Ronstan riser/curved surface adapter fits medium C-Cleat and T-Cleat. Use on round surface such as mast or crossbar.
Ronstan Part# RF5416
https://murrays.com/products/ronstan-roller-furling-swivel-eye-eye
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0078.webp?v=1718897481
RONSTAN ROLLER FURLING SWIVEL (EYE/EYE)
Ronstan Eye & Eye Swivel
Murrays Part# 21-0078
This ball bearing swivel by Ronstan has lower friction and higher working loads than non-ball bearing versions. It is used in conjunction with blocks and rigging systems to provide articulation and rotation. Not suitable for high-speed rotating applications.
https://murrays.com/products/ronstan-roller-furling-swivel-eye-jaw
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-078B.webp?v=1718983884
RONSTAN SWIVEL EYE/FORK
Ronstan Eye & Fork Swivel
Murrays Part# 21-078B
Ronstan swivel is constructed of grade 316 stainless steel, weighs 2.1 oz. and has a breaking load of 3740 lb. Center of pin to center of eye measurement is 1-7/8".
Features:
Smooth articulation.
Ball bearing performance.
https://murrays.com/products/ronstan-shackle-swivel-3-16-jaw-jaw
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0120.webp?v=1718897766
RONSTAN SWIVEL SHACKLE 3/16" (JAW/JAW)
Ronstan Swivel Shackle 3/16" (Jaw/Jaw)
Murrays Part# 21-0120
Ronstan's swivel shackle has 3/16" diameter pins and 1430 lb. breaking load. Bodies and pins are constructed of grade 316 stainless steel. 1-1/4" length from centers of pins. Weighs .7 oz.
Specific Details:
A (in) 3/16
B (in) 15/32
C (in) 1 1/4
E (in) 11/32
Ronstan Part# RF120
https://murrays.com/products/ronstan-sheave-p16-nacra-mast-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Prindle_16_mast_head_sheave_part_number_6003.webp?v=1733183544
RONSTAN SHEAVE: P16 AND NACRA MAST HEAD
Replacement sheave for mast head on Nacra 5.0, 5.2, 5.5, 5.7, 5.8, 6.0, 18 Square, Prindle 16 and Sol Cat 18 (cats that use a wire halyard). UV-resistant acetal material provides high strength and resistance to impact and wear, as well as excellent low friction properties for bearing applications.
https://murrays.com/products/ronstan-shackle-swivel-1-4-jaw-jaw
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0173.webp?v=1718899013
RONSTAN SHACKLE WITH SWIVEL 1/4" (JAW/JAW)
https://murrays.com/products/ronstan-shock-block-5mm-pair
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-8080.webp?v=1719348536
RONSTAN SMALL SHOCK 3/16"
Ronstan shock block Part # RF8080 5mm
https://murrays.com/products/ronstan-single-upright-lead-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-2379.jpg?v=1676950264
RONSTAN SINGLE LEAD BLOCK
Ronstan Single Lead Block
Murrays Part# 21-2379
Lead blocks are a low profile solution for leading halyards or other rig sail controls back to cleats or jammers.
This Ronstan lead block features U.V.-stabilized Acetal sheave and grade 316 stainless steel load housing. Typically used in dinghy spars for control lines.
https://murrays.com/products/ronstan-snap-shackle-with-swivel-tack-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-6130.webp?v=1719347566
RONSTAN SWIVELING FORK SNAP SHACKLE 72MM
Ronstan Swiveling Fork Snap Shackle 72mm
Murrays Part# 21-6130
Top quality Ronstan stainless steel swiveling tack shackle with 1/4" clevis pin features heavy duty plunger springs and precision components to ensure dependable service. Body and hasp profiles are designed for easy clearance of lines and fittings when released. High strength-to-weight ratio.
https://murrays.com/products/ronstan-swivel-360-with-small-c-cleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0067.webp?v=1718897113
RONSTAN SWIVEL 360 WITH SMALL C-CLEAT
https://murrays.com/products/ronstan-swivel-cleat-large-c-with-fast-track
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0058.jpg?v=1718896860
RONSTAN LARGE SWIVEL CLEAT WITH FASTRACK
Ronstan Swiveling Fairlead & Cam Cleat for 3-12mm Rope
Murrays Part# 21-0058
Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Swivel cleat bases permit easy cleating and releasing from any angle. Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy gauge alloy for stiffness and minimum distortion under load.
Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads with fasteners
https://murrays.com/products/ronstan-swiveling-cleat-platform
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/rf5.jpg?v=1718896258
RONSTAN SWIVELING CLEAT UNIT, 28MM BALL BEARING SHEAVES
Ronstan Swiveling Cleat Unit, 28mm Ball Bearing Sheaves
Murrays Part# 21-0005
Swivel cleat bases permit easy cleating and releasing from any angle. Sheave can be relocated to allow the control line to feed from below. Fiber-reinforced nylon body. Comes complete with a 28mm (1-1/4") ball bearing sheave, small T-Cleat and the Fast Track fairlead.
Typically fitted to dinghy and catamaran spars for halyard, cunningham or outhaul control.
https://murrays.com/products/ronstan-trapeze-handles-vertical-grip-pair
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5122R.webp?v=1719342257
RONSTAN TRAPEZE HANDLES-ROPE STYLE (2)
Ronstan Red Trapeze Handles -Rope Style
Murrays Part# 21-5122R
Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans.
https://murrays.com/products/ronstan-v-cleat-open-1-8-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5100.webp?v=1719342007
RONSTAN OPEN V-CLEAT FOR 3-6MM LINE
https://murrays.com/products/ronstan-v-cleat-with-fairlead-1-8-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5101.webp?v=1719342139
ROSTAN FAIRLEAD V-CLEAT FOR 3-6MM LINE
Ronstan Fairlead V-Cleat for
3-6mm Line
Murrays Part# 21-5101
Ronstan's carbon-composite V-cleats are strong, lightweight and inexpensive, and are a simple solution to cleating lines under moderate loads. This cleat is great for control lines on catamarans and dinghies. A cutaway in base of fairlead cleats can be used as a becket for a 2:1 purchase system. Use with rope diameters of 1/8"-1/4". Measurement between hole centers is 1-7/8" and the cleat weighs only 0.4 oz.
https://murrays.com/products/rope-end-stop
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0199.jpg?v=1676950276
ROPE END STOP
Rope End Stop
Murrays Part# 27-0199
This 1-1/8" diameter plastic ball has a 1/4" hole and comes in assorted colors as available. The hole on one end accommodates the stop knot.
https://murrays.com/products/rope-lock-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie-Rope-Lock-61530000_01-0120-murrays.com.jpg?v=1676950277
NYLON ROPE LOCK
Rope Lock (Nylon)
Murrays Part# 001-0120
Easy-to-adjust black rope lock commonly used for trapeze height adjustment. Standard rope stop on Hobie®, Nacra and Prindle. Double-up back-to-back for extra strength. Hobie part number 61530000 for this rope lock.
Works on 3/16 to 1/4" line
https://murrays.com/products/rudder-cam-kit-hobie-14-hobie-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2050_Hobie_rudder_cam_kit_5202.jpg?v=1734023159
H-14/16 RUDDER CAM KIT
Murrays Part# 001-2050
The Hobie Rudder Cam Kit: Hobie 14, Hobie 16 are replacement rudder cams to keep the rudder lock-down mechanism on your Hobie Cat® functioning properly. The Hobie® 14 or 16 kit includes two cams, two reusable, internally threaded sister screws for both sides, and instructions. Purchase the complete kit if your boat has the stock flare pins; purchase just the cams (#50-10480000 each) if your boat already has sister screws.
Compare to Hobie Cat® #5202.
https://murrays.com/products/rudder-cam-kit-h17-h18-h20-h21-wave-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3550.jpg?v=1676950280
H-17/18/20/21/WAVE AND GETAWAY RUDDER CAM KIT
H17/18/20/21/Wave and Getaway
Rudder Cam Kit
Murrays Part# 001-3550
The Rudder Cam Kit: H17, H18, H20, H21, Wave, & Getaway are replacement rudder cams which help keep your Hobie’s rudder lock-down mechanism functioning properly. This kit includes sister screws to install the cams, making it easier to replace the cams. Purchase the complete kit if your boat has the stock flare pins; or you can purchase just the cams (#50-10480000 each) if your boat already has sister screws.
https://murrays.com/products/rudder-cam-screws-h17-h18-h20-older-wave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-3551_RUDDER_CAM_PINS_HOBIE17-18-20.jpg?v=1744914841
H-17/18/20/OLDER WAVE AND GETAWAY RUDDER CAM PINS
Rudder Cam Screws H17, H18, H20,
Older Wave and Getaway
Murrays Part# 001-3551
The Murrays Rudder Cam Pins are a pair of sister screws for use on the Hobie 17, 18, 20, 21, as well as the older Hobie Wave and Getaway rudder cams. These pins are an upgrade form the original stock hollow flare rivet that came on the Hobie. The Sister Screws are much easier to install and remove, and they are reusable.
Compare to Hobie Cat® #5203 and #50312301.
Sold in pairs
https://murrays.com/products/rudder-cam-sister-screws-hobie-14-hobie-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-2051_Murrays_Hobie_16_rudder_cam_pins.jpg?v=1755722403
H-14/16 RUDDER CAM SISTER SCREWS
The Murrays Rudder Cam Sister Screws: Hobie 14, Hobie 16 are a pair of sister screws for Hobie 14 and 16 rudder cams. These pins are much easier to install and remove than the stock pin and they are reusable! Sold in pairs
Hobie Cat Part# 10470000
Hobie Part# 5201
https://murrays.com/products/rudder-gudgeon-upper-h14-h16-h17-only
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3351.jpg?v=1676950283
H-14/16 UPPER GUDGEON
H14/16 Upper Gudgeon
Murrays Part# 25-3351
This latest, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14's, 16's and 17, order separate upper and lower gudgeons.
For all other Hobie® cats Part# 25-3352 for both gudgeons. Each
This gudgeon is a replacement for item #50101301
https://murrays.com/products/rudder-pins-h17-h18-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Nylon_rudder_pins.png?v=1715122407
RUDDER PINS H-17/18 PR (NYLON)
Rudder Pins H17/18 (Nylon)
Murrays Part# 001-4271
Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. These universal 3/8" x 9-1/4" nylon rudder pins are suited for all Hobie® 17/18/Wave rudder castings. Compare to Hobie Cat® #5052 fiberglass rudder pins (pair).
https://murrays.com/products/rudder-pins-hobie-14-hobie-16-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie_16_rudder_pins_aluminum.jpg?v=1744839123
H-14/16 ALUMINUM RUDDER PINS
H14/16 Aluminum Rudder Pins
Murrays Part# 001-2272
Aluminum rudder pins are standard on Hobie® 14 and 16 and are good for all-around, low maintenance use. Pair of 3/8" x 8" rudder pins with cotter pins.
New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be difficult to remove. The stainless pins are a better fit.
Sold in pairs
https://murrays.com/products/rudder-pins-h17-h18-wave-getaway-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-4274_Aluminum_Hobie_17_-_18_rudder_pins_57490e28-7e74-407b-b7ea-7cb0b0997cdf.jpg?v=1718812039
H-17/18/WAVE AND GETAWAY ALUMINUM RUDDER PINS
Rudder Pins H17, H18, Wave, Getaway (Aluminum)
Murrays Part# 001-4274
Aluminum rudder pins for the Hobie 17, 18, Wave and Getaway. Aluminum 3/8″ x 9-1/4″ rudder pins, cotter pins are included.
Sold in pairs
Compare to Hobie Cat® #60880001
https://murrays.com/products/rudder-pins-hobie-14-hobie-16-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie_Nylon_rudder_pins.png?v=1744839048
H-14/16 NYLON RUDDER PINS PR
Rudder Pins H14/16 Pair (Nylon)
Murrays Part# 001-2271
Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. Pair of 3/8" x 8" rudder pins with cotter pins for Hobie® 14 or Hobie® 16.
Each pair is equivalent to two Hobie Cat® item #10881000
Sold in pairs
https://murrays.com/products/rudder-pins-nacra-prindle-h21-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Nacra_prindle_Hobie_21_Aluminum_rudder_pins.jpg?v=1744836750
NACRA/PRINDLE AND H21 ALUMINIUM RUDDER PIN
Rudder Pin Nacra, Prindle and H21 (Aluminum)
Murrays Part# 001-5272
Aluminum rudder pins for Nacra, Prindle and Hobie® 21 measure 3/8" x 10-1/4" end-to-end, with hole at each end. Cotter pins are included.
Sold in pairs
https://murrays.com/products/rudder-pins-hobie-14-hobie-16-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-2269.jpg?v=1741622746
H-14/16 RUDDER PINS PR (STAINLESS)
H14/16 Rudder Pins Stainless Steel
Murrays Part# 001-2269
Weight-saving, hollow stainless rudder pins for Hobie® 14 or Hobie® 16 with stronger .065" wall provide reduced wear and the best long-term fit. This kit includes one pair of 3/8" x 8" rudder pins with cotter pins.
New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be diff
https://murrays.com/products/rudder-pins-hollow-stainless-for-h17-h18-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-4274_Aluminum_Hobie_17_-_18_rudder_pins.jpg?v=1714141788
H-17/18 RUDDER PINS PR (SS)
Rudder Pins H17/18 Stainless Steel
Murrays Part# 001-4273
Weight-saving compared to solid stainless steel pins, hollow stainless rudder pins with still beefy .065″ wall provide reduced wear and the good long-term durability. The universal stainless steel 3/8″ x 9-1/4″ rudder pins are suited for; Hobie 17/18/20 rudder castings. Also used on older Hobie Wave and Getaways with metal rudder castings.
Cotter pins are included.
Alternative to Hobie Cat® #60880011. (* Pre EZ LOC Rudder c
https://murrays.com/products/rudder-return-heavy-duty-shock-cord-hobie-14-hobie-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2240.jpg?v=1676950291
H-14/16 RUDDER RETURN HAND SHOCK CORD
H14/16 Rudder Return Hand Shock Cord
Murrays Part# 001-2240
Two 32" shock cords with balls keep your Hobie® 14 or 16 rudders down when the cams don't! Order Kisme Kleets #05-1010 separately, if needed.
https://murrays.com/products/rudder-pins-nacra-prindle-h21-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/4522_Nacra_Prindle_Hobie_21_Stainless_Rudder_Pin.jpg?v=1744839670
NACRA/PRINDLE AND H21 SS RUDDER PIN
Rudder Pin Nacra, Prindle and H21 Stainless Steel
Murrays Part# 001-5273
Long-wearing, weight-saving, hollow stainless rudder pins with strong, .065" wall provide reduced wear and the best long-term fit. These rudder pins measure 3/8" x 10-1/4" end-to-end with a hole at each end. They will fit Nacra, Prindle and Hobie® 21. Cotter pins are included. These pins are a replacement for Hobie® factory item #40880011 (sold individually).
Sold in pairs
https://murrays.com/products/rudder-return-kit-for-h14-16-inter
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-2049.jpg?v=1676950293
H-14/16 INTER RUDDER RETURN KIT
Rudder Return Kit for H14/16-Inter
Murrays Part# 012-2049
This Rudder Return Kit for H14/16-Inter by Tren Tec eliminates kick-up. Rudders return to down position easily with one hand and tension holds rudder down if a cam fails. Accommodates both rudders.
Use this page to order product numbers 12-2049 (for Hobie® 14/16/Inter; Hobie Cat® item #1544)) and 12-2059 (for Hobie 17/18/21)
https://murrays.com/products/rudder-stiffening-spacer
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0053.jpg?v=1676950294
RUDDER STIFFENING SPACER
Murrays PN 001-0053
The Murrays Rudder Stiffening Spacer is a 2" diameter spacer for use on Hobie, Nacra and Prindle catamarans to eliminate excessive clearances between rudders and castings which cause rudder slop, side to side wobble, and thwart rudder alignment. A kit with spacers and nuts is also available (#01-2053). The Murrays Rudder Stiffening Spacer are quite thin so that you can achieve a perfect fit. Standard kits come with 8 spacers.
https://murrays.com/products/rudder-stiffening-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2053.jpg?v=1676950295
RUDDER STIFFENING KIT
Rudder Stiffening Kit
Murrays Part# 001-2053
The Rudder Stiffening Kit for all Hobies eliminates excessive clearances between rudders and castings which cause wobble and thwart rudder alignment. Kit has 4 stainless nylock nuts and 8 spacers. Compare to Hobie Cat® item #136.
https://murrays.com/products/safety-pin-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0126_5010ef19-476c-46a3-b238-0712c74a7768.jpg?v=1676950296
SAFETY PIN STAINLESS STEEL
Safety Pin Stainless Steel
Murrays Part# 21-0126
The stainless steel safety pin is an alternative to the split ring, spring clip or cotter pin. Hobie Cat® Part# 20503
https://murrays.com/products/sail-hc-logos-you-cut-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/U-cutHobielogo.jpg?v=1745606456
SAIL "HC" LOGO U-CUT PR BLACK
https://murrays.com/products/sail-pocket-protector-kit-main
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1001.jpg?v=1676950297
MAIN SAIL POCKET PROTECTOR KIT
Hobie Cat #80550005 Main sail batten pocket protector kit. Hobie, Nacra, Prindle.
https://murrays.com/products/sail-pocket-protector-kit-jib
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1002.jpg?v=1676950300
JIB SAIL POCKET PROTECTOR KIT
Sail Pocket Protector Kit Jib
Murrays Part# 001-1002
The Jib Sail Pocket Protector Kit includes one pair of tough nylon protectors with indentations for included rivets that are set with a hammer.
https://murrays.com/products/sail-repair-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1665.jpg?v=1676950300
SAIL REPAIR KIT
Sail Repair Kit
Murrays part# 007-1665
The Sail Repair Kit by Hobie Cat® keeps you prepared for emergency repairs to sails and trampolines. Includes 3 different weights of thread, 3 sizes of needles and an approximately 6" x 6" patch of white sail cloth. Hobie Cat® factory item #1665.
https://murrays.com/products/sailors-all-purpose-tool-ssi
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0005.jpg?v=1676950302
SAILORS ALL PURPOSE TOOL (SSI)
Sailors All Purpose Tool (SSI)
Murrays Part# 001-0005
The sailor's all-purpose stainless tool is a wrench that fits nuts for 1/4" and 5/16" bolts and it's also a cam remover, screwdriver, bottle opener and shackle tool. It also helps with shackle pins and drain plugs.
Hobie Cat® Part# 83103
https://murrays.com/products/screw-fhms-8-32-x-1-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1517_fa841936-389c-4da4-a239-56d3d2489662.jpg?v=1676950303
SCREW FHMS #8-32 X 1" (SS)
Screw FHMS #8-32 X 1"Stainless Steel
Murrays Part# 19-1517
Stainless steel #8-32 x 1" flat head screw can be used for port installation.
Compare to Hobie Cat® Part# 8031231
https://murrays.com/products/screw-fhms-10-32-x-1-00-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1518_3bb3a8b0-cefa-435f-9d91-9b205b803d5d.jpg?v=1676950304
SCREW FHMS #10-32 X 1.00" (SS)
Screw FHMS #10-32 X 1.00
Stainless Steel
Murrays Part# 19-1518
https://murrays.com/products/screw-fhms-6-32-x-1-2-brass
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1510.jpg?v=1676950304
SCREW FHMS #6-32 X 1/2" (BRASS)
FHMS #6-32 X 1/2 (Brass)
Murrays Part# 19-1510
Flat head #6-32 x 1/2" brass machine screw fits Pocket Protector kits #01-1001 and #01-1002.
https://murrays.com/products/screw-fhms-8-32-x-3-4-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1516.jpg?v=1676950305
SCREW FHMS #8-32 X 3/4" (SS)
Screw FHMS #8-32 X 3/4 Stainless Steel
Murrays Part# 19-1516
Stainless steel flat head #8-32 x 3/4" machine screw.
https://murrays.com/products/screw-fhsms-10-x-1-50-stainlesss-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1626.jpg?v=1676950308
SCREW FHSMS #10 X 1.50" (SS)
Screw FHSMS #10 X 1.50 Stainless Steel
Murrays Part# 19-1626
Flat head, self-tapping, #10 x 1.50" stainless steel sheet metal screw.
https://murrays.com/products/screw-fhms-8-32-x-3-8-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1515.jpg?v=1676950307
SCREW FHMS #8-32 X 3/8" (SS)
Screw FHMS #8-32 X 3/8 (Stainless Steel)
Murrays Part# 19-1515
Stainless steel flat head #8-32 x 3/8" machine screw
https://murrays.com/products/screw-fhsms-12-x-3-4-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1625.jpg?v=1676950308
SCREW FHSMS #12 X 3/4" (SS)
Screw FHSMS #12 X 3/4 Stainless Steel
Murrays Part# 19-1625
Flat head, self-tapping, stainless steel #13 x 3/4" sheet metal screw.
https://murrays.com/products/screw-fhms-8-32-x-1-25-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1520.jpg?v=1676950309
SCREW FHMS #8-32 X 1.25" (BLACK NYLON)
Screw FHMS #8-32 X 1.25 (Nylon)
Murrays Part# 19-1520BK
Nylon #8-32 x 1.25" flat head screw for installation of ports. Available in black or white.
https://murrays.com/products/screw-fhsms-6-x-1-2-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1610_a97a20dc-91b9-42ed-92b0-d0c78310baa6.jpg?v=1676950312
SCREW FHSMS #6 X 1/2" (SS)
FHSMS #6 X 1/2 Stainless Steel
Murrays Part# 19-1610
Flat head self-tapping #6 x 1/2" sheet metal screw can be used to attached lance cleats.
https://murrays.com/products/screw-fhsms-8-x-1-50-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1622.jpg?v=1676950312
SCREW FHSMS #8 X 1.50" (SS)
Screw FHSMS #8 X 1.50 Stainless Steel
Murrays Part# 19-1622
Flat head, self-tapping, #8 x 1.5" stainless steel sheet metal screw is used to mount Harken Micro Cam-Matic cleats (need 2).
https://murrays.com/products/screw-ohsms-10-x-3-4-stainless-steel-phillips-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3225.jpg?v=1676950312
SCREW OHSMS #10 X 3/4" (SS)
Screw OHSMS #10 X 3/4"
Stainless Steel
Murrays Part# 19-3225
Stainless steel #10 x 3/4" oval Phillips head, self-tapping sheet metal screw.
https://murrays.com/products/screw-fhsms-8-x-1-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1620.jpg?v=1676950314
SCREW FHSMS #8 X 1" (SS)
FHSMS #8 X 1 Stainless Steel
Murrays Part# 19-1620
Flat head, self-tapping, stainless steel #8 x 1" sheet metal screw.
This screw is commonly used to hold the track endcaps on pre 1997 H16 Jib Traveler Tracks and all H18 Jib Traveler Tracks.
Can screw into aluminum or fiberglass.
https://murrays.com/products/screw-phms-10-24-x-3-8-stainless-steel-phillips-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3010.jpg?v=1676950316
SCREW PHMS #10-24 X 3/8" (SS)
Screw PHMS #10-24 X 3/8 (Stainless Steel) Phillips Head
Murrays Part# 19-3010
Stainless steel, Phillips pan head #10-24 x 3/8" machine screw.
https://murrays.com/products/screw-phms-10-32-x-1-stainless-steel-slot-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2915.jpg?v=1676950316
SCREW PHMS #10-32 X 1" (SS)
Screw PHMS #10-32 X 1 Stainless Steel Slot Head
Murrays Part# 19-2915
Stainless steel, pan head #10-32 x 1" machine screw with slot is used as dolphin striker screw on all Prindles. Replaces Murrays item #56-F112.
Also used in some Hobie Applications, compare to 8030111 Hobie Part.
Applications:
H18/18 SX/16 and Getaway
Tiller Hinge Screw: 2
https://murrays.com/products/screw-phms-10-24-x-1-50-stainless-steel-phillips-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3011.jpg?v=1676950316
SCREW PHILLIPS HEAD #10-24 X 1.50 (SS)
Screw Phillips Head Montel Steel
#10-24 X 1.50
Murrays Part# 19-3011
Stainless steel, Phillips pan head #10-24 x 1-1/2" machine screw.
https://murrays.com/products/screw-phms-10-32-x-2-stainless-steel-phillips-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2918.jpg?v=1676950318
SCREW PHMS #10-32 X 2" (SS)
Screw PHMS #10-32 X 2"
Stainless Steel
Murrays Part# 19-2918
Stainless steel, #10-32 x 2" Phillips pan head machine screw. Mainsheet block replacement screw. Also used to mount Harken Cam-Matic cleats #28-0150 and #28-0365 (needs 2 screws).
https://murrays.com/products/screw-phms-10-32-x-5-8-stainless-phillips-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2910.jpg?v=1676950320
SCREW PHMS #10-32 X 5/8 (SS)
Screw PHMS #10-32 X 5/8" Stainless Steel
Murrays Part# 19-2910
Stainless steel, pan Phillips head, #10-32 x 5/8" machine screw.
https://murrays.com/products/screw-phms-6-32-x-7-8-brass
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2905.jpg?v=1676950320
SCREW PHMS #6-32 X 7/8" (BRASS)
PHMS #6-32 X 7/8 (Brass)
Murrays Part# 19-290
Brass, pan head #6-32 x 7/8" machine screw.
https://murrays.com/products/screw-phms-10-32-x-7-8-stainless-steel-slot-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2916.jpg?v=1676950320
SCREW PHMS #10-32 X 7/8" (SS)
Screw PHMS #10-32 X 7/8"
Stainless Steel
Murrays Part# 19-2916
Stainless steel #10-32 x 7/8" machine screw has pan head with slot
https://murrays.com/products/screw-phms-1-4-20-x-1-slot-head-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3020.jpg?v=1676950322
1/4-20 X 1" Stainless Steel Screw
Screw PHMS 1/4-20 X 1"
Stainless Steel
Murrays Part# 19-3020
Stainless steel, slotted pan head 1/4-20 x 1" machine screw to fasten mast bearing on pre-1990 Hobie® 18. Other uses include universal Prindle/Nacra bow plate and bow tang on Prindle 15/16/18/Escape.
Replaces Murrays item #56-F125.
https://murrays.com/products/screw-phsms-10-x-3-4-stainless-steel-phillips-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3210.jpg?v=1676950323
SCREW PHSMS #10 X 3/4" (SS)
Screw PHSMS #10 X 3/4 Stainless Steel Phillips Head
Murrays Part# 19-3210
Stainless steel, Phillips pan head, #10 x 3/4" self-tapping sheet metal screw.
https://murrays.com/products/screw-phsms-10-x-1-stainless-steel-phillips-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3211.jpg?v=1676950324
SCREW PHSMS #10 X 1" (SS)
Screw PHSMS #10 X 1"
Stainless Steel
Murrays Part# 19-3211
Stainless steel Phillips pan head, self-tapping #10 x 1" sheet metal screw is used for installation of footstrap inserts.
https://murrays.com/products/screw-phsms-10-x-1-2-stainless-steel-phillips-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3209.jpg?v=1676950324
SCREW PHSMS #10 X 1/2" (SS)
Screw PHSMS #10 X 1/2 Stainless Steel Philips Head
Murrays Part# 19-3209
Stainless steel, Phillips pan head #10 x 1/2" self-tapping sheet metal screw.
https://murrays.com/products/screw-phsms-12-x-1-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3220.jpg?v=1676950326
SCREW PHSMS #12 X 1" (SS)
Screw PHSMS #12 X 1"
Stainless Steel
Murrays Part# 19-3220
Stainless steel, pan head, self-tapping #12 x 1" sheet metal screw.
https://murrays.com/products/screw-phsms-12-x-3-4-stainless-steel-phillips-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3230.jpg?v=1676950327
SCREW PHSMS #12 X 3/4" (SS)
Screw PHSMS #12 X 3/4 Stainless Steel Phillips Head
Murrays Part# 19-3230
Stainless steel, Phillips pan head, #12 x 3/4" self-tapping sheet metal screw
https://murrays.com/products/screw-phsms-8-x-1-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1619.jpg?v=1676950328
SCREW PHSMS #8 X 1" (SS)
Screw PHSMS #8 X 1"
(Stainless Steel)
Murrays Part# 19-1619
Pan head, self-tapping, stainless steel #8 x 1" sheet metal screw
https://murrays.com/products/screw-phsms-4-x-3-8-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1615-1_56bed88e-8a78-4d0e-9f5f-86323aaf0aa5.jpg?v=1737479914
SCREW PHSMS #4 X 3/8" (SS)
Screw PHSMS #4 X 3/8 Stainless Steel
Murrays Part# 19-1615
Stainless steel, pan head, self-tapping #4 x 3/8" sheet metal screw.
https://murrays.com/products/screw-phsms-8-x-2-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1624.jpg?v=1676950330
SCREW PHSMS #8 X 2" (SS)
Screw PHSMS #8 X 2"
Stainless Steel
Murrays Part# 19-1624
Stainless steel, pan head, self-tapping, #8 x 2" sheet metal screw
https://murrays.com/products/screw-rhms-10-24-x-1-stainless-steel-phillips-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3511.jpg?v=1676950332
SCREW RHMS #10-24 X 1" (SS)
Round Head Machine Screw #10-24 X 1 Stainless Steel Phillips Head
https://murrays.com/products/screw-rhms-10-24-x-1-1-8-stainless-steel-phillips-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3012.jpg?v=1676950332
SCREW RHMS #10-24 X 1-1/8 (SS)
Screw RHMS #10-24 X 1-1/8" Stainless Steel
Murrays Part# 19-3012
Stainless steel, Phillips round head #10-24 x 1-1/8" machine screw
https://murrays.com/products/screw-phsms-8-x-1-50-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1623.jpg?v=1676950332
SCREW PHSMS #8 X 1.50" (SS)
Screw PHSMS #8 X 1.50" (Stainless Steel)
Murrays Part# 19-1623
Stainless steel, pan head, self-tapping, #8 x 1.5" sheet metal screw
https://murrays.com/products/screw-rhms-10-24-x-7-8-stainless-steel-phillips-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3510.jpg?v=1676950334
SCREW RHMS #10-24 X 7/8" SS
Screw RHMS #10-24 X 7/8
Stainless Steel Phillips Head
Murrays Part# 19-3510
Stainless steel, Phillips round head #10-24 x 7/8" machine screw
https://murrays.com/products/screw-rhms-10-32-x-1-2-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3507.jpg?v=1676950336
SCREW RHMS #10-32 X 1/2" (SS)
Screw RHMS #10-32 X 1/2 Stainless Steel
Murrays Part# 19-3501
Stainless steel, round head #10-32 x 1/2" machine screw. Measurements are diameter and threads per inch times grip length.
https://murrays.com/products/screw-rhms-10-32-x-3-4-stainless-steel-slot-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2912-1.jpg?v=1676950336
SCREW RHMS #10-32 X 3/4 (SS)
Screw RHMS #10-32 X 3/4
Stainless Steel Slot Head
Murrays Part# 19-2912
Stainless steel slotted round head #10-32 x 3/4" machine screw is used on windsurfing fins.
https://murrays.com/products/screw-rhms-10-32-x-7-8-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3500.jpg?v=1676950336
SCREW RHMS #10-32 X 7/8 (SS)
Screw RHMS #10-32 X 7/8 Stainless Steel
Murrays Part# 19-3500
Stainless steel, round head #10-32 x 7/8" machine screw. Measurements are diameter and threads per inch times grip length.
https://murrays.com/products/screw-rhms-5-16-18-x-1-25-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3530.jpg?v=1676950338
SCREW RHMS 5/16-18 X 1.25 (SS)
Screw RHMS 5/16-18 X 1.25" Stainless Steel
Murrays Part# 19-3530
Stainless steel round head machine screw measures 5/16-18 x 1-1/4". Bow Tang Bolt
Equivalent to Hobie Cat® Part# 8030301
https://murrays.com/products/screw-rhms-12-24-x-1-25-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3520.jpg?v=1676950340
SCREW RHMS #12-24 X 1.25 (SS)
Screw RHMS #12-24 X 1.25 Stainless Steel
Murrays Part# 19-3520
Stainless steel, round head #12-24 x 1.25" machine screw is a replacement screw for Hobie® rudder gudgeon.
https://murrays.com/products/screw-rhsms-10-x-1-25-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3710.jpg?v=1676950340
SCREW RHSMS #10 X 1.25" (SS)
Screw RHSMS #10 X 1.25"
Stainless Steel
Murrays Part# 19-3710
Round head self-tapping #10 x 1.25" stainless steel sheet metal screw.
https://murrays.com/products/screw-rhms-1-4-20-x-1-2-stainless-steel-phillips-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3019.jpg?v=1676950340
SCREW RHMS 1/4-20 X 1/2" (SS)
Screw RHMS 1/4-20 X 1/2"
Stainless Steel
Murrays Part# 19-3019
Stainless steel, Phillips pan head 1/4-20 x 1/2" machine screw is used to fasten mast bearing on post-1990 Hobie® 18.
Compare to Hobie 8032011
https://murrays.com/products/screw-rhsms-10-x-2-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3713.jpg?v=1676950342
SCREW RHSMS #10 X 2 (SS)
Screw RHSMS #10 X 2 (Stainless Steel)
Murrays Part# 19-3713
Round head, self-tapping #10 x 2" stainless steel sheet metal screw.
https://murrays.com/products/screw-rhsms-10-x-1-50-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3711.jpg?v=1676950344
SCREW RHSMS #10 X 1.50 (SS)
Screw RHSMS #10 X 1.50"
Stainless Steel
Murrays Part# 19-3711
Round head self-tapping #10 x 1.50" stainless steel sheet metal screw
https://murrays.com/products/screw-rhsms-10-x-2-50-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3714.jpg?v=1676950344
SCREW RHSMS #10 X 2.50" (SS)
Rhsms #10 X 2.50 Stainless Steel
Murrays Part# 19-3714
Round head, self-tapping #10 x 2.5" stainless steel sheet metal screw
https://murrays.com/products/shackle-bow-3-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/ronstan-shackle-bow-1-4.jpg?v=1676950344
RONSTAN 3/16" BOW SHACKLE
Ronstan Stainless Steel Bow Shackle, 3/16" Pin, Coined Head
Murrays Part# 21-0634
Solid stainless steel bow shackle has 3/16" diameter pin.
UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin.
https://murrays.com/products/shackle-d-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0616.webp?v=1718915824
RONSTAN 1/4" D SHACKLE
Ronstan Stainless Steel D Shackle, 1/4"
Murrays Part# 21-0617
UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin.
Ronstan solid stainless steel shackle has 1/4" pin diameter. Having a spare on hand may mean the difference between sailing or not!
https://murrays.com/products/shackle-bow-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Ronstan_.25_inch_Bow_Shackle_RF635H.jpg?v=1744045823
RONSTAN 1/4" BOW SHACKLE
https://murrays.com/products/shackle-d-3-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0616_Ronstan_3_16_D_Shackle.jpg?v=1752770245
RONSTAN 3/16 D SHACKLE
Ronstan Stainless Steel D Shackle, 3/16" Pin, Slotted Head
Murrays Part# 21-0616
Ronstan stainless D shackle has 3/16" diameter pin. This shackle is a substitute for Hobie® item #11220000, #SP0051 and #SP0052.
https://murrays.com/products/shackle-d-5-32-slot-head-pin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0615_1bca7ad7-6def-4a71-95aa-16cbc847426e.jpg?v=1744308164
RONSTAN STAINLESS STEEL D SHACKLE, 5/32" PIN, SLOTTED HEAD
Ronstan Stainless Steel D Shackle, 5/32" Pin, Slotted Head
Murrays Part# 21-0615
Ronstan stainless D shackle has 5/32" slot head pin.
Features:
High strength to weight ratio
Premium quality, rated
Grade 316 stainless steel bodies and pins
https://murrays.com/products/shackle-pin-only-1-4-threaded
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0033_c9ce5e8c-d8e1-4676-8260-3767f196ba31.jpg?v=1676950350
SHACKLE PIN ONLY 1/4" THREADED
Shackle Pin Only 1/4 Threaded
Murrays Part# 21-0033
Threaded stainless pin fits 1/4" Ronstan D or bow shackle.
https://murrays.com/products/shackle-long-d-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0623.webp?v=1718916055
RONSTAN STAINLESS STEEL LONG D SHACKLE, 1/4" PIN, COINED HEAD
Ronstan Stainless Steel Long D Shackle, 1/4" Pin, Coined Head
Murrays Part# 21-0623
This stainless steel long D-shackle has a 1/4" diameter pin. Great for adding replacing the clevis pin on your H18 bridles for a spinnaker project.
https://murrays.com/products/shackle-pin-only-3-16-threaded
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0032_e67250b1-709e-4c1f-9497-9118780bdee3.jpg?v=1676950352
SHACKLE PIN ONLY 3/16" THREADED
Shackle Pin Only 3/16 Threaded
Murrays Part# 21-0032
Threaded stainless pin fits 3/16" Ronstan D or bow shackle.
https://murrays.com/products/shackle-short-halyard-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-9343.jpg?v=1676950352
1/4" SHORT HALYARD SHACKLE
1/4" Short Halyard Shackle
Murrays Part# 22-9343
1-7/32" long with fixed guard pin and spring-loaded 1/4" captive pin. Maximum working load is 1550 lbs.
https://murrays.com/products/shackle-twisted-d-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0628_9e694df3-11a6-4208-9072-fad150515121.webp?v=1718916984
RONSTAN STAINLESS STEEL TWISTED D SHACKLE, 1/4" PIN, COINED HEAD
Ronstan Stainless Steel Twisted D Shackle, 1/4" Pin, Coined Head
Murrays Part# 21-0629
Ronstan's twisted D shackle is constructed of 316 stainless steel and has a 1/4" pin. PL breaking load is 3090 lb.; UDL breaking load is 5070 lb. Weighs 1.1 oz.
https://murrays.com/products/shackle-twisted-d-3-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0628.webp?v=1718916837
RONSTAN 3/16" TWISTED D SHACKLE
Ronstan 3/16 Twisted D Shackle
Murrays Part# 21-0628
Stainless steel twisted D-shackle has a 3/16" pin.
https://murrays.com/products/sidewinder-becket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0701.jpg?v=1676950360
SIDEWINDER BECKET
Sidewinder Becket
Murrays Part# 005-0701
Add on becket for classic Harken Mainsheet systems. The sidewinder becket is for older Harken 2.25" or 3.00" triple blocks. It enables extra purchase ratio without sacrificing low profile block stacking. Some drilling is required for installation.
https://murrays.com/products/shroud-tensioner-de-tensioner
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1060.jpg?v=1676950360
SHROUD TENSIONER/DE-TENSIONER
SHROUD TENSIONER
https://murrays.com/products/sister-clip-micro
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/04-7730.jpg?v=1676950361
SISTER CLIP MICRO (EA)
Sister Clip Micro
Murrays Part# 004-7730
The stainless steel micro sister clip is a quick connector with no moving parts. The micro sister clip does not have a slot.
https://murrays.com/products/single-shank-ball-stop-3-32
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1039.jpg?v=1676950362
SINGLE SHANK BALL STOP 3/32"
https://murrays.com/products/sister-clip-mini
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0536.webp?v=1718914893
RONSTAN 24MM SISTER CLIP (EACH)
Ronstan 24mm Sister Clip
Murrays Part# 21-0536
Stainless steel mini sister clip is a quick connector with no moving parts.
Sister clip, 7mm (9/32") eye clearance. Effective means of quickly attaching and detaching ropes
https://murrays.com/products/small-block-with-removable-sheave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/23-0912.jpg?v=1736274130
SMALL BLOCK WITH REMOVABLE SHEAVE
SMALL BLOCK W/REMOVABLE SHEAVE
This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires.
Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity.
Hobie item #3103
https://murrays.com/products/small-bullet-block-mini
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/23-0911.jpg?v=1676950365
MINI BULLET BLOCK
Mini Bullet Block
Murrays Part 23-0911
As used in the Murrays No-Cut EZ-Up Trap Ring Return Kit.
Mini bullet block has 1-3/16" sheave, Teflon® bearing and 5/16" line capacity.
Hobie Cat® uses #3103 for this block.
https://murrays.com/products/small-fairlead-1-1-4-x-1-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/23-0921.jpg?v=1676950366
RONSTAN SMALL FAIRLEAD: 1-1/4 X 1/2
Small Fairlead: 1-1/4 X 1/2
Murrays Part# 23-0921
Stainless steel fairlead measurements:
A = 1-1/4" (31.4mm) between holes center-to-center
B = 1/2" (12.7mm) height
C = 3/16" (5mm) hole diameter
https://murrays.com/products/snap-hook-1-bronze
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-3461.jpg?v=1676950368
SNAP HOOK #1 (BRONZE)
Snap Hook #1 (Bronze)
Murrays Part# 27-3461
Die cast manganese bronze snap hook measures 2-7/8" overall with 11/16" diameter hole and 1/4" opening. Weight: .05 lb.
https://murrays.com/products/snap-shackle-with-swivel-eye
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-4521.jpg?v=1739291580
SNAP SHACKLE WITH SWIVEL EYE
Snap Shackle with Swivel Eye
Murrays Part# 22-4521
2-3/4" long stainless steel snap shackle with swivel eye has 1/2" diameter eye. SWL 1000 lbs. Weighs 2.4 oz.
https://murrays.com/products/snap-shackle-with-tack-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/pro_20151224170453T8S764g1xT.jpg?v=1739235356
SNAP SHACKLE WITH TACK 1/4"
Snap Shackle With Tack 1/4"
Murrays Part# 22-4501
Swiveling tack shackle with 1/4" clevis pin. Use on hexaratchets on Hobie® 18, Nacra or Prindle. To connect the swivel shackle to an item that requires a 3/16" clevis pin, you will need a 3/16" clevis pin with 7/8" shaft. Also convenient for the jib tack connection on Nacras and Inters.
https://murrays.com/products/snapper-pin-3-8-x-2-square
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-9830.jpg?v=1676950371
3/8" X 2" SQUARE SNAPPER PIN
3/8" X 2" Square Snapper Pin
Murrays Part# 22-9830
Plated steel snapper pin measures 3/8" diameter x 2" grip length (shoulder to the keeper). The quick release bail is easy to release, but very secure when engaged. Used in our trailer mounted mast support.
https://murrays.com/products/sol-cat-18-bridle-1-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Bridle_BK_d25f2da2-1e9f-48c8-a11e-892ccfff6c27.jpg?v=1676950372
SOL-18 BRIDLE 1/8" WHITE WIRE
https://murrays.com/products/sol-cat-18-main-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2274-00_47_SOL-18_MAIN_HALYARD_W_SHACKLE_Main_halyard_for_a_18_Sol_Cat_catamaran..jpg?v=1734041270
SOL-18 MAIN HALYARD WITH SHACKLE
SOL-18 MAIN HALYARD W/SHACKLE
Main halyard for a 18' Sol Cat catamaran.
https://murrays.com/products/sol-cat-18-trapeze-wires-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Black_Single_Trap_22d94101-c472-4ab4-9f78-f8417122acda.jpg?v=1729613576
SOL-18 TRAPEZE WIRES (2)
Hobie Sol Cat 18 Trapeze Wires
(2 Handles)
Trapeze Wire set for single trapeze.
Use this page to order product numbers:
002-6253-01
002-6253-02
https://murrays.com/products/spare-parts-kit-h14-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3221_2.jpg?v=1676950379
H-14/16 SPARE PARTS KIT:
Hobie 16 spare parts kit, shackle tool, drain plugs, rudder pins, clevis pins and rings, 3/16" bow shackle, 1/4" bow shackle, batten tie strings, and 3 mast bearings. Pouch comes in assorted colors as available. Hobie #30305 and #30306.
https://murrays.com/products/spare-parts-kit-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-8221-2011.jpg?v=1676950380
NACRA SPARE PARTS KIT
Spare Parts Kit: Nacra
Murrays Part# 001-8221
Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit contains the most frequently lost and needed items for your Nacra catamaran. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors.
Newer Nacras use pintles instead of rudder pins, so the included rudder pins are not
https://murrays.com/products/spare-parts-kit-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie_18_spare_parts_kit.jpg?v=1715122550
H-18 SPARE PARTS KIT:
Spare Parts Kit: H18
Murrays Part# 001-4221
Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit for Hobie® 18 contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Compare to Hobie Cat® #30307.
https://murrays.com/products/spare-parts-kit-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-5221-2011A.jpg?v=1676950381
PRINDLE SPARE PARTS KIT
Prindle Spare Parts Kit
Murrays Part# 001-5221
Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, the Murrays Spare Parts Kit contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie line. Pouch comes in assorted colors as available.
https://murrays.com/products/split-ring-3-16-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9492_2.jpg?v=1718812114
3/16-1/4" SPLIT RING
3/16 - 1/4" Split Ring
Murrays Part# 22-9492
Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler
Medium Split ring
Dimensions: 5/8″ Diameter
Material: 316 Stainless steel.
This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring.
https://murrays.com/products/split-ring-1-4-with-pigtail
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9491.jpg?v=1718812176
3/16 - 1/4" SPLIT RING WITH PIGTAIL
3/16 - 1/4" Split Ring with Pigtail
Murrays Part# 22-9491
A pigtail makes this split ring (ring ding) easier to open than standard split rings.
For use on 3/16″ – 1/4″ clevis pins
Material: 316 Stainless steel.
Medium Split ring
Dimensions: 5/8″ Diameter
This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans.
Applications:
All Hobies Shroud and Forestay split ring
H18/ Hobie 18 SX – Tiller Yoke Clevis Pin Ring
Also called Ring Ding, Clevis Ring, Cotter Ring or Ringy Ding
https://murrays.com/products/spreader-covers-hobie
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-3262.jpg?v=1676950385
HOBIE SPREADER COVERS
Hobie Spreader Covers
Murrays part# 007-3262
These vinyl spreader bar end covers are real sail-savers! The black, smooth resilient covers protect the jib luff from wear and tear from cotter keys and sharp edges. Pair. Hobie Cat® factory item #3262.
https://murrays.com/products/split-ring-5-16-3-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9493_2.jpg?v=1718812233
3/4" SPLIT RING
Split Ring
Stainless steel split ring for 5/16″-3/8″ diameter clevis pins. The larger size makes it easier to get on and off.
Large Split ring
Dimensions: 3/4″ Diameter
Material: 316 Stainless steel.
Also called Ring Ding or Ringy Dingy.
Hobie Part number 20860010 – RF686
https://murrays.com/products/spring-1-4-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-0060.jpg?v=1754582763
SPRING 1/4" (SS)
Spring 1/4" Stainless Steel
Murrays.com Part# 001-0060
1/4" stainless steel spring as used in the Murrays Tiller Connection Kit (#01-2061)
This spring fits on a 1/4 bolt.
Specs: 1/2" Long x 3/8" OD
https://murrays.com/products/stand-up-spring-conical-medium
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0320_305bd687-f88a-4ad0-8cdd-f54a9bcef55d.jpg?v=1676950390
STAND UP SPRING CONICAL MEDIUM
Stand Up Spring Conical Medium
Murrays Part# 21-0320
This medium conical stand-up spring is used for Oxen blocks, OK car, etc.
https://murrays.com/products/spring-clip-1-4-5-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-2204.jpg?v=1676950390
SPRING CLIP 1/4 - 5/16"
Spring Clip: 1/4-5/16
Murrays Part# 25-2204
Use this stainless spring clip for quick rudder pin removal or on 1/4" to 5/16" pins. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie 14, 16, 17, 18, 20, Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape.
https://murrays.com/products/stand-up-spring-conical-light
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0319_788de492-133a-4149-b4d2-c12f5e3d6e8e.jpg?v=1744238127
STAND UP SPRING CONICAL LIGHT
Stand Up Spring Conical Light
Murrays Part# 21-0319
This soft, conical spring is used for Harken bullet block (e.g. Hobie® 16 jib traveler car and Hobie® spinnaker pole blocks).
https://murrays.com/products/spring-clip-3-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-2205_5f489937-c008-4496-a6a3-7cbf74e803c3.jpg?v=1676950393
RUDDER PIN SPRING CLIP: 3/8
https://murrays.com/products/staymaster-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1043.jpg?v=1676950394
STAYMASTER TURNBUCKLE 3/32
The Staymaster Turnbuckle - No more hit-and-miss wire tensioning! Shorten your diamond wires and use an adjustable tension mechanism to easily repeat tension settings
https://murrays.com/products/stop-sleeve
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/download_f7737576-246d-4326-9220-2b26490f0ac1.jpg?v=1733418995
STOP SLEEVE 3/32"
Stop Sleeve 3/32"
Murrays Part# 002-1031
A stop sleeve grips a single wire to provide a "stop" for halyard hooks or trapeze handle, etc. A special "J" size opening on a nicropress tool is required for closing 3/32" and 1/8" stops; 5/32" stop requires "M" opening.
Use this page to order item numbers 02-1031 3/32", 02-1041 1/8", 02-1051 5/32" and 02-1061 3/16" stop sleeves.
https://murrays.com/products/streamlined-replacement-urethane-tendon-1994-amp-up
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/1111.jpg?v=1676950416
REPL URETHANE TENDON 1994 & UP
https://murrays.com/products/stretch-righting-h14-h16-h17-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-3294.jpg?v=1721232962
H-14/16/17/18 STRETCH RIGHTING
STRETCH RIGHTING H14/16/17/18
Murrays Part# 001-3294
The Murrays Stretch Righting Kit is our most popular righting line kit for catamarans such as Hobie® 14, 16, 17, 18 and 18SX. If the bow starts to bury, the line is readily available to both skipper and crew who can anchor themselves to keep from being catapulted forward. This beautifully simple system features easy-to-grip, 1/2" hollow braid line with internal shock cord that stretches for righting or trapezing and then recoils automatically
https://murrays.com/products/stud-3-32-right-hand-thread
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1036.jpg?v=1676950425
3/32 STUD10/32 RH THD
3/32 TURNBUCKLE STUD
https://murrays.com/products/super-goose-h17-h18-h20-h21
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/12-4060_Supergoose.jpg?v=1717427882
H-17/18/20/21 SUPER GOOSE
SUPER GOOSE H-17/18/20/21
This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing.
The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model.
Hobie part number 1510
https://murrays.com/products/stud-5-32-x-25-x-28-right-hand
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1052.jpg?v=1676950426
WIRE STUD RIGHT 5/32x1/4x28
https://murrays.com/products/swivel-with-aluminum-cam-and-bullseye
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3014_12dbb9c0-4b8b-4169-9845-2ba81f26cd91.jpg?v=1676950429
HEAVY DUTY SWIVEL WITH ALUMINUM CAM & BULLSEYE
https://murrays.com/products/swivel-mount-base-with-fasteners
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1162.jpg?v=1676950430
PRINDLE SWIVEL MOUNT BASE WITH FASTENERS
Swivel Mount Base with Fasteners
Murrays Part# 007-1162
The offset base pad kit fits Hobie® and Prindle elliptical crossbars. Includes injection-molded plastic base and fasteners.
Replacement fasteners are also available (requires 3 self-tapping screws #19-1620, 1 machine screw #19-1516, and 1 nut #19-2016).
Hobie Cat® Part# 1162
https://murrays.com/products/swivel-with-carbo-cam-bullseye
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3010_c7c814d0-b445-4791-8e73-4db0086fe81b.jpg?v=1676950431
HEAVY DUTY SWIVEL WITH CARBO CAM & BULLSEYE
Harken Swivel with Carbo Cam Bullseye
Murrays Part# 25-3010
Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads and flat head screws separately to mount to your front crossbar.
https://murrays.com/products/swivel-with-bullseye-no-cleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3011.jpg?v=1676950430
SWIVEL WITH BULLS-EYE (NO CLEAT)
Swivel with Bulls-Eye (No Cleat)
Murrays Part# 25-3011
This item includes the swivel with bullseye, but not the cleat. Swivel cam cleats (cleat sold separately) are ideal for main traveler control and up-release jib cleating systems. Order plastic base pads and fasteners separately.
https://murrays.com/products/tear-aid-a-roll-3x30
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/tear_aid_roll.jpg?v=1676950435
TEAR-AID A ROLL (3"x30')
Tear-Aid A Roll (3"x30')
Murrays part# 010-3310-1
Tear-Aid Type A is the best-known kite and sail repair tape and it works on all kite canopy / sail materials: Dacron, mylar and ripstop nylon and kite bladders. Each package includes one foot of clear repair tape, alcohol pad and instructions. To use, clean area to be repaired with alcohol, cut patch to size, then peel and stick.
https://murrays.com/products/tear-aid-kite-sail-repair-patch-3-x-12
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-3310.jpg?v=1676950438
TEAR-AID KITE/SAIL REPAIR PATCH (3x12")
Tear-Aid Type A is the best-known kite and sail repair tape and it works on all kite canopy / sail materials: Dacron, mylar and ripstop nylon and kite bladders. Each package includes one foot of clear repair tape, alcohol pad and instructions. To use, clean area to be repaired with alcohol, cut patch to size, then peel and stick.
https://murrays.com/products/telescoping-paddle-20-to-45
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1303.jpg?v=1676950438
TELESCOPING PADDLE 20" TO 45"
Telescoping Paddle 20" to 45"
Murrays Part# 001-1303
Compact paddle power made tough for years of hard use. The paddle has a T-Grip handle and extends from 20" to 45". The bright orange blade doubles as a signaling device. Paddles are required by law in many states for small boats and personal watercraft. Hobie Cat® uses item #3091 for this paddle.
https://murrays.com/products/telo-cat-bridle-vane
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/08-1450_2.jpg?v=1676950439
TELO-CAT BRIDLE VANE
Telo-Cat Bridle Vane;
Murrays Part# 008-1450
Designed especially to take the abuse of catamaran sailing, the Telo-Cat is durable and highly visible. It installs on the headstay bridle in seconds and is easily removed for trailering with no tools required. It comes complete with 8" vane, adjustable tacking arms and mounting hardware to fit most catamarans. The Telo-Cat is made of high-impact plastic with a stainless steel shaft and tacking arms. The vane rides on a super sensitive Teflon® bearing syst
https://murrays.com/products/telo-cat-replacement-vane
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/08-1450A.jpg?v=1730309173
TELO-CAT REPLACEMENT VANE
Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings.
https://murrays.com/products/telo-cat-hobie-vane-adapter-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/08-1451_2.jpg?v=1676950446
ROLLER FURLER BRIDLE VANE ADAPTER
H18 Telo-Cat/Hobie Vane Adapter
Murrays Part# 008-1451
Adapts the Telo-Cat (#08-1450) or Hobie® (#04-7703) vane to the Hobie 18 furling drum. When using to adapt a Telo-Cat vane for use on a Hobie 18, it is necessary to enlarge one hole in the plastic part of the vane to accommodate a clevis pin.
Hobie Cat® Part# CM7705
https://murrays.com/products/thimble-1-16-3-32-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0480_9338ca70-561c-44f5-a657-fe32dfcf34f5.jpg?v=1744238650
RONSTAN STAINLESS THIMBLE FOR 2.5MM (3/32") WIRE
Thimble 1/16-3/32 Stainless Steel
Ronstan's #481 thimble is used on Hobie 18 jib halyard, shrouds, forestays and trapeze wires. Constructed of grade 304 stainless steel. Weight: .1 oz.
https://murrays.com/products/thimble-1-4-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0486.webp?v=1718908275
RONSTAN STAINLESS STEEL THIMBLE FOR 6MM (1/4") WIRE
Ronstan Stainless Thimble for 6mm (1/4") Wire
Murrays Part# 21-0486
Ronstan thimble for 1/4" wire is constructed of grade 316 stainless steel.
https://murrays.com/products/thimble-3-32-1-8-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0034.jpg?v=1676950452
THIMBLE 3/32" - 1/8" (SS)
Thimble 3/32" - 1/8" Stainless Steel
Stainless Steel Light Duty Wire Rope Thimbles are designed to provide basic reinforcement and protection for wire rope loops in low-load applications. Light-duty thimbles are more compact and are used in situations where the rope is not subjected to extreme tension or heavy stress. Their purpose is to prevent wire rope loops from fraying, deforming, or wearing at the contact point, while maintaining the shape and integrity of the loop. Stainless Steel Light Duty W
https://murrays.com/products/thimble-5-32-3-16-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0484.webp?v=1718908046
RONSTAN STAINLESS THIMBLE FOR 5MM (3/16") WIRE
Ronstan Stainless Thimble for 5mm (3/16") Wire
Ronstan thimble is used on shrouds. Constructed of grade 316 stainless steel. Weight: .2 oz.
https://murrays.com/products/third-hand
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-2040.jpg?v=1676950454
THIRD HAND
Third Hand
Murrays Part# 007-2040
This is the closest thing to "self-steering" a Hobie® 14 or 16. The handy little device grips the hiking stick and holds it at a position of your choice. Great for light air sailing or when paddling in if the wind dies. It also keeps the rudders from flopping around when on the beach. Attaches at each end of the traveler track. Hobie Cat® item #204.
https://murrays.com/products/tie-down-h16-custom
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1793.jpg?v=1676950456
TIE DOWN H-16 CUSTOM
Tie Down H16 Custom
Murrays Part# 007-1793
Nice factory tie down kit for H16s, bolts to trailer and has hook and receiver for boat, slip hook into receptacle on boat, toggle the lever, and your boat is secure!
https://murrays.com/products/tiger-diamond-wire-double-without-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0795-20_7d6becfd-bc74-4004-9149-8cdf3936538c.jpg?v=1676950456
TIGER DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE
Tiger Diamond Wire Double without Turnbuckle
Murrays Part# 002-6095-20
Double diamond wire without turnbuckle for Hobie® Tiger is constructed to factory specifications.
https://murrays.com/products/tiger-jib-halyard-with-shackle-roller-furling
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0786-00_3dc39a96-4bcb-431a-aaaa-d35d99eb4aba.jpg?v=1676950460
TIGER JIB HALYARD WITH SHACKLE ROLLER FURLING
https://murrays.com/products/tiger-shroud-5-32-roller-swaged-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_10807299-3a58-46ec-a7f8-085f6fc1a892.jpg?v=1676950460
TIGER SHROUD 5/32" ROLLER SWAGED BLACK WIRE
Tiger Shroud 5/32" Roller Swaged Black Wire
Murrays Part# 002-6005-12
Single black shroud for Hobie® Tiger is hydraulically swaged to be clean and strong. Constructed to factory specifications.
Hobie® Part# 70792011
https://murrays.com/products/tiger-lower-forestay-roller-furling-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-5345-92.jpg?v=1676950460
TIGER LOW FORESTAY ROLLER FURLING 5/32- BLACK
https://murrays.com/products/tiller-yoke-assembly-with-spacers
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0062_2.jpg?v=1676950464
TILLER YOKE ASSEMBLY WITH SPACERS
Murrays Part# 001-0062
Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072
Applications: All Hobies and Prindles
Tiller Yoke Assembly: 1
https://murrays.com/products/tiger-upper-forestay-roller-furling-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0235-00_f89c4a2e-e0b2-4f12-8364-09d003aca269.jpg?v=1676950464
TIGER UPPER FORESTAY ROLLER FURLING 5/32" BARE WIRE
Tiger Upper Forestay Roller Furling 5/32" Bare Wire
Murrays Part# 002-6035-02
Upper forestay for Hobie® Tiger with roller furling setup does not include swivel.
https://murrays.com/products/tiller-rudder-stiffening-kit-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-5141.jpg?v=1723214107
PRINDLE TILLER AND RUDDER STIFFENING KIT
Tiller Rudder Stiffening Kit: Prindle
Murrays Part# 001-5141
Spring-loaded tiller connection with contoured spacers tightens the hinge connection on Prindles. Six plastic shims reduce slop between rudders and castings
https://murrays.com/products/tiller-connector-new-style
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1953.jpg?v=1676950468
HOBIE TILLER CONNECTOR KIT
Hobie 1953 tiller connection kit - new style
https://murrays.com/products/tiller-connection-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2061.jpg?v=1745534833
TILLER CONNECTION KIT (PR)
Tiller Connection Kit
Murrays Part# 001-2061
The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052.
Applications:; Hobie 14, 16, 17, 18, 18SX
https://murrays.com/products/toggle-pin-with-lanyard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/IMG_2023.jpg?v=1719942531
RONSTAN TOGGLE PIN WITH LANYARD 1/4 X 3/4"
Ronstan Toggle Pin with Lanyard
1/4 X 3/4"
Murrays Part# 21-1153L
Stainless steel 1/4" diameter toggle pin replaces 3/4" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.
https://murrays.com/products/t-nut-channel-insert-8mm-brass
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/03-0197.jpg?v=1676950471
T-NUT CHANNEL INSERT 8mm BRASS
https://murrays.com/products/toggle-strap-12-24
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/13-1020.jpg?v=1676950472
TOGGLE STRAP 12" - 24"
Toggle Strap 12"-24"
Murrays Part# 13-1020
Our handy toggle strap secures items with circumferences from 12" to 24". It is constructed of 1/8" shock cord that is secured with a 1-1/8" end stop.
Sold individually
Compare to Hobie Cat® Part# 370
https://murrays.com/products/tracker-car-complete-post-1993
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-0111.jpg?v=1676950472
HOBIE TRACKER CAR COMPLETE NEW (POST93)
https://murrays.com/products/traced-you-cut-sail-number-black-14
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-2810BK.jpg?v=1676950475
SAIL NUMBER 14" U-CUT BLACK
https://murrays.com/products/tracker-car-complete-pre-1994
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1050.jpg?v=1676950476
TRACKER CAR COMPLETE (PRE'94)
Tracker Car Complete (Pre-1994)
Murrays Part# 007-1050
This tracker car is the standard replacement part for all 1993 and earlier Hobie® 14, 16 and 17 main tracker traveler assemblies. Includes 2-3 rivets where required. Hobie Cat® factory item #105.
https://murrays.com/products/tracker-bottom-roller-post-1993
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-0112.jpg?v=1676950476
TRACKER BOTTOM ROLLER (POST 93)
Tracker: Bottom Roller (Post-1993)
Murrays Part# 007-0112
Bottom roller with rivets for the tracker car on 1993 and later Hobie® 14, 16 and 17 's.
This part allows you to rebuild your existing Hobie Traveler car by just replacing the track rollers and keeping the top half. This part can be installed on older boats if the matching Deep Track is installed as well.
Fits Hobie Getaway Traveler Car.
Hobie Cat Part# 112
https://murrays.com/products/tracker-bottom-roller-pre-1994
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1060.jpg?v=1676950479
TRACKER: BOTTOM ROLLER (PRE 94)
Tracker: Bottom Roller (Pre-1994)
Murrays Part# 007-1060
The standard replacement bottom roller for all 1993 and earlier Hobie® 14 and 16s. Includes two rivets. Hobie Cat® factory item #106.
https://murrays.com/products/tracker-hinge-pin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1055.jpg?v=1676950480
TRACKER HINGE PIN
https://murrays.com/products/tracker-deck-plate
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1051.jpg?v=1676950480
TRACKER DECK PLATE (EA)
Murrays Part# 007-1051
The standard replacement deck plate for the traveler on all Hobie® 14, 16 and newer 17's. Hobie Cat® factory item #11870000. Uses a 3/16 x 1/2" clevis pin to attach to the main sheet system.
Also used in Hobie 14 and Hobie 16 upgrade downhaul systems to secure lower block.
Sold individually
https://murrays.com/products/tracker-hinge-upright
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1054.jpg?v=1676950481
TRACKER UPRIGHT HINGE
Tracker Hinge Upright
Murrays Part# 007-1054
The standard replacement hinge upright for the tracker on all Hobie® 14, 16 and newer 17's.
Fits: Hobie Getaway Main Traveler Car
Hobie Cat® Part# 11840100
https://murrays.com/products/tracker-sheave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1053.jpg?v=1676950483
TRACKER TRAVELER SHEAVE
Tracker: Sheave
The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's. Hobie® factory item #11880000.
Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave.
Fits Hobie Getaway Main Traveler Car.
https://murrays.com/products/tracker-sheave-replacement-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1059.jpg?v=1676950484
TRACKER TRAVELER SHEAVE REPLACEMENT KIT
Tracker Traveler Sheave Replacement Kit
Murrays Part# 007-1059
The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's.
Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave.
Fits Hobie Getaway Main Traveler Car.
Hobie® Part# 11880000
https://murrays.com/products/tracker-sheave-spacer
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1052.jpg?v=1676950484
TRACKER SHEAVE SPACER (EA)
Tracker Sheave Spacer
Murrays Part# 007-1052
The standard replacement sheave spacer for the traveler on all Hobie® 14, 16 and newer 17's.
Sold Individually
Hobie Cat® Part# 11860000.
https://murrays.com/products/tramp-clamp-10
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-0010.jpg?v=1676950485
TRAMP CLAMP (10)
TRAMP CLAMP (10)
Minimize chafing at trampoline stress points and reduce the possibility of the trampoline pulling out of the aluminum extrusion. Clamps slide into the aluminum extrusion track. 10 pieces, 1.5" long. By Tren Tec.™ Hobie Cat® uses #2066 for this item
https://murrays.com/products/trailer-jack-with-caster
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/16-9510.jpg?v=1676950487
TRAILER JACK W/CASTER
Trailer Jack with Caster
Murrays Part# 16-9510
The Fulton 1000-lb. swivel jack is ideal for light boats up to 18 feet.
https://murrays.com/products/tramp-lace-kit-h14-h16-h18-low-stretch-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2242.jpg?v=1676950488
H-14/16/18 LOW STRETCH TRAMPOLINE LACING LINE KIT
Hobie Trampoline Lacing Line Kit: Hobie 14, Hobie 16, Hobie 18: low stretch line offers a longer-lasting option over shock cord and is the better choice for sailors who prefer a very tight tramp. As the line stretches slightly over time, sailors can re-tension the tramp lacing to their liking.
The kit contains three lengths of 3/16" 8-strand black low-stretch line (one piece 33', two pieces 15') and lacing instructions.
This kit will lace all factory and most aftermarket trampolines.
https://murrays.com/products/tramp-lacing-kit-h14-16-18-shock-cord
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2241.jpg?v=1676950488
H-14/16/18 SHOCK CORD TRAMP LACING KIT
Shock Cord Tramp Lacing Kit H14/16/18
Murrays Part# 001-2241
Shock Cord Tramp Lacing Kit H14, 16, 18 is for the recreational sailor who is lacing a trampoline. Shock Cord is usually the better choice over line tramp lacing. Just "set it and forget it" because shock cord maintains the tension you set when lacing your tramp. Shock cord also reduces tramp and grommet wear because the load is spread over multiple grommets, especially when walking on the tramp. The latest technology shock cord used in our kits
https://murrays.com/products/tramp-lace-kit-h14-h16-h18-dyneema-race-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2242-1.jpg?v=1676950489
H-14/16/18 DYNEEMA RACE TRAMP LACE KIT
H14/16/18 Dyneema Race Tramp Lace Kit
Murray Part# 001-2242-1
Tramp Lace Kit H14 H16 H18 - Dyneema Race Kit uses Dyneema® which is the best choice for racers or other sailors looking for the ultimate in strength, light weight, and very low stretch characteristics in their tramp line lacing. Dyneema® has excellent ultraviolet and abrasion-resistance properties for longevity.
https://murrays.com/products/trampoline-getaway-wings-black-mesh
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3092-Hobie-Getaway-Wing-Trampolines-BlackMesh.jpg?v=1758749086
GETAWAY WING TRAMPOLINE - BLACK
Getaway Wing Trampoline - Black
Murrays part# 30-3092
This part is not frequently stocked. Please allow 2-3 weeks to build and ship if not in stock.
Black mesh wing trampolines for the Getaway. Also called wing covers. Not made by Hobie, not legal for Hobie class racing. Built in California by sailors for sailors. We use the same mesh that Hobie uses.
Requires 2 x 18' lengths of 3/16" line for lacing. We recommend 3/16" VLS
Compare to Hobie part# 37971058
https://murrays.com/products/trampoline-h14-or-h14-turbo-mesh-1-piece-bias-cut
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3103.jpg?v=1718808590
H-14 1-PIECE BIAS CUT TURBO TRAMPOLINE-BLACK
H18 1-Piece Bias Cut Trampoline-Black
Murrays Part# 30-3103-2
This one-piece, bias-cut, black mesh tramp for Hobie® 18 provides a smooth, uncomplicated deck and includes an 11"x12" pocket and adjustable hiking straps. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Two-year warranty on workmanship and materials.
https://murrays.com/products/trampoline-getaway-forward-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-3091.jpg?v=1680644897
GETAWAY FORWARD TRAMPOLINE 2000-02
Hobie Getaway Forward Trampoline - 2000-2002 - 3/8 BOLT ROPE Compare to Hobie part number 37980055
https://murrays.com/products/trampoline-h14-or-h14-turbo-mesh-3-piece
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3101_meh.jpg?v=1718808654
H-14 3-PIECE MESH TRAMPOLINE-BLACK
H14 3-Piece Mesh Trampoline-Black
Murrays Part# 30-3101
This aftermarket 3-piece tramp for Hobie® 14 is not made by Hobie Cat, so it is not legal for Hobie® class racing. Black polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Grommets for Turbo jib block wires are included.
Hobie Part# 10970055
https://murrays.com/products/trampoline-h17-mesh-3-piece-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3104_Hobie_17_trampoline_black_mesh.jpg?v=1721243881
H-17 3PC MESH TRAMPOLINE-BLACK
H17 3-Piece Mesh Trampoline-Black
Murrays Part# 30-3104
This aftermarket tramp for the 17 is now class-legal for Hobie racing! Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle.
It features a halyard pocket in the front and hiking straps on both sides.
Compare to Hobie part# 50670091
https://murrays.com/products/trampoline-h17-mesh-1-piece-with-straps-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3103.jpg?v=1718808590
H-17 1PC BIAS CUT TRAMPOLINE-BLACK
H18 1-Piece Bias Cut Trampoline-Black
Murrays Part# 30-3103-2
This one-piece, bias-cut, black mesh tramp for Hobie® 18 provides a smooth, uncomplicated deck and includes an 11"x12" pocket and adjustable hiking straps. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Two-year warranty on workmanship and materials.
https://murrays.com/products/trampoline-h17-wing-mesh-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3104-3-300x300.jpg?v=1734039140
H-17 WING TRAMPOLINE-BLACK
The Murrays Hobie 17 Wing Trampoline is a pair of aftermarket trampolines for Hobie 17 wings, they are not class-legal for Hobie class racing. Made with polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Includes both right and left wing trampolines.
Sold as a pair (left and right)
https://murrays.com/products/trampoline-h18-mesh-1-piece-bias-cut-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3103.jpg?v=1718808590
H-18 1PC BIAS CUT TRAMPOLINE-BLACK
H18 1-Piece Bias Cut Trampoline-Black
Murrays Part# 30-3103-2
This one-piece, bias-cut, black mesh tramp for Hobie® 18 provides a smooth, uncomplicated deck and includes an 11"x12" pocket and adjustable hiking straps. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Two-year warranty on workmanship and materials.
https://murrays.com/products/trampoline-h18-mesh-3-piece-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3103_2.jpg?v=1721755218
H-18 3PC MESH TRAMPOLINE-BLACK
H18 Black 3 Piece Trampoline
Murrays Part# 30-3103
Murrays black mesh tramp for Hobie® 18 is not Class-legal for racing. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. The Hobie 18 version comes with a sewn in pocket in the front for your halyard and jib furling line.
https://murrays.com/products/trampoline-h18sx-h21sc-wings-black-pair
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3105-1_2H18SX_21sc_WING_TRAMPOLINES_Murrays_Hobie_18SX_and_21SC_Wing_Trampolines._nbsp_Lace_on._nbsp_Sold_as_a_pair._nbsp_nbsp_Compare_to_Hobie_part_number_68040255_Not_compatible_with_the_Hobie_18_Magnum..jpg?v=1732215121
H18SX/21SC WING TRAMPOLINES-BLACK
H18SX/21sc WING TRAMPOLINES
Murrays Hobie 18SX and 21SC Wing Trampolines. Lace on. Sold as a pair.
Compare to Hobie part number 68040255
Not compatible with the Hobie 18 Magnum.
https://murrays.com/products/trampoline-h18-wing-magnum-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3105-1.jpg?v=1732215375
H-18 MAGNUM WING TRAMPOLINE-BLACK
Hobie 18 Magnum wing trampoline set.
Requires 2 x 16' pieces of 3/16 VLS line to install
https://murrays.com/products/trampoline-h20-mesh-1-piece-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-3106.jpg?v=1676951808
H-20 1 PIECE TRAMPOLINE-BLACK - TEF
Trampoline H20 Mesh 1-Piece-Black
Murrays Part# 30-3106Y
This aftermarket, one-piece, bias-cut, black mesh tramp for Hobie® 20 is not Hobie® Class-legal for racing. The tramp includes hiking straps, trapeze grommets, 16" by 24" Velcro pocket and webbing loops.
https://murrays.com/products/trampoline-h21se-mesh-1-piece-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-3105.jpg?v=1676951812
H-21SE 1PC MESH TRAMPOLINE WITH TEFLON THREAD-BLACK
Trampoline H21SE Mesh 1-Piece Black
Murrays Part# 30-3105TEF
Aftermarket one-piece, bias-cut black mesh tramp for Hobie® 21 Special Edition is not Hobie Class-legal for racing. Includes trapeze grommets, one Velcro halyard pocket and standard thread; Teflon (PTFE) thread extends the life of the tramp and is available for an additional charge.
https://murrays.com/products/trampoline-n5-2-hull-520-72-wide-mesh-1-piece-bias-cut-black
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-n5-5sl-mesh-1-piece-bias-cut-black
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-n5-2-hull-pre-520-74-wide-mesh-1-piece-black
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-n5-7-mesh-1-piece-bias-cut-black
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-n6-0-mesh-1-piece-black
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-n5-8-mesh-1-piece-bias-cut-black
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-p16-mesh-1-piece-black-with-ports
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3122.jpg?v=1719940984
PRINDLE 16 MESH TRAMPOLINE-BLACK
P16 Mesh Trampoline-Black
Murrays Part# 30-3122
Black mesh tramp for Prindle 16 includes cut-outs for ports. Hiking straps are installed and one pocket is included. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Order lacing line separately.
https://murrays.com/products/trampoline-p15-mesh-1-piece-black
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-p18-mesh-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3123.jpg?v=1745864508
PRINDLE 18 MESH TRAMPOLINE-BLACK
Prindle 18 trampoline
https://murrays.com/products/trapeze-handle-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0412.jpg?v=1676950508
MURRAYS TRAPEZE HANDLE
The Murrays Trapeze handle features a contoured grip and a wire guide prevent hand contact with the wire. A recessed cavity in the base holds the nicropress oval and shields the sailor from sharp wire ends.
Sold Individually.
Hobie uses item #2011 for this handle.
Used on Nacra, Prindle and Hobie catamarans.
https://murrays.com/products/trampoline-p18-2-p19-mesh-black
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trapeze-shock-cord-for-hobie-16-and-hobie-14
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0128.jpg?v=1676950510
H-14/16 TRAP SHOCK CORD
Hobie trapeze shock cord 20730001 and 20730002
https://murrays.com/products/trapeze-shock-cord-kit-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0131.jpg?v=1676950511
H-20 TRAP SHOCK CORD KIT
Trap Shock Cord Kit: H20
Murrays Part# 001-0131
A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. Our shock cord kit comes with one plastic carbine hook installed; the other hook is installed after lacing shock cord through trampoline grommets. Kit includes two lengths of 1/4" shock
https://murrays.com/products/trapeze-spreader-8-with-v-hook
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0149.jpg?v=1676950513
8" TRAPEZE SPREADER WITH V-HOOK
Trapeze Spreader 8" with V-Hook
Murrays Part# 001-0149
Medium-width stainless 8" windsurfing spreader with V-shaped hook for strength and safety. Weighs 7.5 oz. Limited to stock on hand.
https://murrays.com/products/trapeze-shock-cord-nacra-prindle-sol-cat-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3520.jpg?v=1676950514
NACRA/PRINDLE/SOL CAT AND GETAWAY TRAP SHOCK CORD
Trap Shock Cord: Nacra, Prindle, Sol Cat and Getaway
Murrays Part# 001-8019
A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. A plastic carbine hook is installed on one end only; the other hook is included to be installed after the shock cord is put on the boat. Cord is 1/4" d
https://murrays.com/products/trapeze-wires-single
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-8253.jpg?v=1676950515
TRAP WIRE SINGLE CUSTOM
Trap Wire Single Custom
Murrays Part# 002-8253
https://murrays.com/products/trigger-snap-bronze-2-5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-136800.jpg?v=1676950516
TRIGGER SNAP-BRONZE 2.5"
Trigger Snap Bronze 2.5"
Murrays Part# 27-136800
Lightweight, die-cast, manganese bronze swiveling shackle with overall length of 2-9/16". Weighs 1.5 oz. SWL unspecified.
https://murrays.com/products/turnbuckle-complete-5-32
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1058.jpg?v=1676950517
TURNBUCKLE COMPLETE 5/32"
https://murrays.com/products/turnbuckle-body-tubular
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1048-2_2.jpg?v=1676950518
TURNBUCKLE BODY TUBULAR
https://murrays.com/products/turnbuckle-complete-1-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1048.jpg?v=1676950520
TURNBUCKLE COMPLETE 1/8"
https://murrays.com/products/twist-toggle-hobie-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie-20-jib-halyard-toggle-41880001-1.jpg?v=1676950521
HOBIE/PRINDLE TWIST TOGGLE
Twist Toggle: Hobie/Prindle
Murrays Part# 25-3320
Stainless steel twist toggle is the standard equipment connection between the shroud anchor pin and shroud adjuster on many catamarans. The twist toggle acts as a universal joint to help eliminate binding. Hobie Cat® item #20210000.
https://murrays.com/products/washer-8-white-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-4006WH.jpg?v=1676950523
WASHER #8 WHITE NYLON
WASHER #8 (WH NYLON)
Murrays PN 19-4006WH
White nylon washer is used for installation of access ports (hatches).
https://murrays.com/products/upright-solo-righting-system-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1263.jpg?v=1676950524
H-14/16 UPRIGHT SOLO RIGHTING SYSTEM
Upright Solo Righting System H14/16
Murrays Part# 007-1263
This system extends the shroud to make righting your cat by yourself easier. Special care is needed to ensure that the mast is secured, as it can come out of its socket when the product is used.
Hobie Part# 1263
https://murrays.com/products/washer-5-16-flat-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-4018.jpg?v=1676950525
WASHER 5/16x3/4" SS
Washer 5/16x3/4" Stainless Steel
Murrays Part# 19-4018
Flat stainless steel washer with 5/16" diameter hole.
https://murrays.com/products/washer-flat-stainless-steel-10-sae
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-4014.jpg?v=1676950526
FLAT WASHER SS #10 (.188"x.5")
Flat Washer #10 (.188"x.5") Stainless Steel
Murrays Part# 19-4014
https://murrays.com/products/washer-and-cotter-pin-kit-for-cat-trax
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/cat-trax-bearing-kit_95f138a8-3914-46f8-80bf-77e73368ba84.jpg?v=1676950527
CAT TRAX WASHER & COTTER PIN KIT
Cat Trax Washer & Cotter Pin Kit
Murrays Part# 13-1401-7
Kit includes: Replacement washers and cotter pins for two Cat Trax beach wheels.
https://murrays.com/products/wave-bridle-1-8-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Bridle_BK_219d64ba-98b7-4217-bbdc-a8eb7185e824.jpg?v=1676950529
WAVE BRIDLE 1/8" BLACK WIRE
Wave Bridle 1/8" Black
Murrays Part# 002-0814-02
One black bridle for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® 39822011.
https://murrays.com/products/hobie-wave-main-halyard-comptip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie_Wave_Halyard_38651001.jpg?v=1762188780
WAVE MAIN HALYARD
The Murrays main halyard for Hobie Wave is constructed with 1/4" polyester yacht braid line and 316 stainless wire finished with a halyard shackle with a captured pin, Built to factory specifications. A main halyard is used to raise the main sail.
Compare to Hobie part number 38651001.
https://murrays.com/products/wave-forestay-1-8-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_BK_3903f08c-6625-462b-bf9b-5254fa7fe0f3.jpg?v=1676950530
WAVE FORESTAY 1/8" BLACK WIRE
Wave Forestay 1/8" Black
Murrays Part# 002-0844-02
One black forestay for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® #39810001.
https://murrays.com/products/windsurf-adjustable-outhaul-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-9520.jpg?v=1676950532
WINDSURF ADJUSTABLE OUTHAUL KIT
Windsurf Adjustable Outhaul Kit
Murrays Part# 001-9520
Racers and recreational windsurf sailors can adjust outhaul tension "on the fly" for maximum power or speed:
Low gear: Loosen outhaul tension to "power-up" to get going, even in light wind.
Shift to drive: Tighten outhaul to flatten sail for more speed as you get onto a plane and/or more efficiency when heading upwind.
Adjust the outhaul (sail shape) from either side, at any time.
https://murrays.com/products/wave-shroud-1-8-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_eb95a5f3-7d3f-4637-b8a1-b97df0abe9ee.jpg?v=1676950533
WAVE SHROUD 1/8" BLACK WIRE
Wave Shroud 1/8" Black Wire
Murrays Part# 002-0804-02
Single black shroud (sidestay) for Hobie® Wave is constructed to factory specifications.
Compare to Hobie Part# 39790001
https://murrays.com/products/wire-1-8-7x19-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Dwyer-Wire-7x19-Generic-500x__49290_562713b6-6daa-4566-a48f-ac6b422bb1fd.jpg?v=1733337837
WIRE 1/8" 7X19 BARE 304 SS
Wire 1/8" 7X19 Bare 304 Stainless Steel
304 stainless steel cable is the industry standard for marine rigging applications due to its high strength and corrosion resistance. 7x19 cable is flexible and ideal for Hobie, Nacra and Prindle halyards.
Features
304 Stainless Steel
Flexible and Low Stretch
Highly Polished for Marine Use
7 groups of 19 strands
Sold by the foot
https://murrays.com/products/wire-1-16-7x7-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/7X7_BARE_WIRE_d5e1d16d-7ed5-4080-94b6-64ee340a1436.jpg?v=1733417490
WIRE 1/16" 7X7 BARE 304 SS
Wire 1/16" 7X7 Bare 304 Stainless Steel
Murrays Part# 002-0022
304 stainless steel cable is the industry standard for marine rigging applications due to its high strength and corrosion resistance. 7x7 cable is flexible and ideal for Hobie, Nacra and Prindle halyards.
https://murrays.com/products/wire-1-8-1x19
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/1x19_316_stainless_steel_wire_rope.jpg?v=1733791169
WIRE 1/8" 1X19 BARE 316 SS
316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. Ideal for manufacturing long lasting bridals, shrouds and stays.
Features
316 Stainless Steel
Stiff and Low Stretch
Highly Polished for Marine Use
One Strand Consisting of 19 Wires
Sold by the foot
https://murrays.com/products/wire-3-32-1x19
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Dwyer-Wire-1x19-Generic-500x__41096.jpg?v=1733335245
WIRE 3/32" 1X19 BARE SS
316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. Ideal for manufacturing long lasting bridals, shrouds and stays.
Features
316 Stainless Steel
Stiff and Low Stretch
Highly Polished for Marine Use
One Strand Consisting of 19 Wires
Sold by the foot
https://murrays.com/products/wire-3-32-7x19-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Dwyer-Wire-7x19-Generic-500x__49290.jpg?v=1733337082
WIRE 3/32" 7X19 BARE 316 STAINLESS
Wire 3/32" 7X19 Bare 316 Stainless Steel
316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 7x19 cable is flexible and ideal for Hobie, Nacra and Prindle halyards.
Features
316 Stainless Steel
Flexible and Low Stretch
Highly Polished for Marine Use
7 groups of 19 strands
Sold by the foot
https://murrays.com/products/wire-3-32-7x7-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/7X7_BARE_WIRE.jpg?v=1733356749
WIRE 3/32" 7X7 BARE 304 SS
https://murrays.com/products/wire-5-32-7x19-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/7x19_long_wire_bare.jpg?v=1733339614
WIRE 5/32" 7X19 BARE 304 SS
Wire 5/32" 7X19 Bras 304 Stainless Steel
304 stainless steel cable is the industry standard for marine rigging applications due to its high strength and corrosion resistance. 7x19 cable is flexible and ideal for Hobie, Nacra and Prindle halyards.
Features
304 Stainless Steel
Flexible and Low Stretch
Highly Polished for Marine Use
7 groups of 19 strands
Sold by the foot
https://murrays.com/products/wire-5-32-1x19
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Dwyer-Wire-1x19-Generic-500x__13728.jpg?v=1733335218
WIRE 5/32" 1X19 BARE 316 SS
Wire 5/32" 1X19 Bare 316 Stainless Steel
316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. Ideal for manufacturing long lasting bridals, shrouds and stays.
Features
316 Stainless Steel
Stiff and Low Stretch
Highly Polished for Marine Use
One Strand Consisting of 19 Wires
Sold by the foot
https://murrays.com/products/wire-block-single-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-3302.jpg?v=1676950542
SINGLE WIRE BLOCK WITH SHACKLE
Single Wire Block With Shackle
Murrays Part# 22-3302
This single wire block can be used to replace the jib halyard block on Nacra 5.2, Performance part 9896.
https://murrays.com/products/wire-stud-5-32-x-5-16-24-right-hand
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1056.jpg?v=1676950546
WIRE STUD 5/32 X 5/16-24 RH
https://murrays.com/products/wire-stud-left-5-32-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1057.jpg?v=1676950546
WIRE STUD LEFT 5/32" (SS)
https://murrays.com/products/trapeze-shock-cord-h17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3520_78d9a3c7-5fe0-495a-bc22-f7e0c6b59e03.jpg?v=1676950546
H-17 TRAP SHOCK CORD
Trap Shock Cord H17
Murrays Part# 001-3520
A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. Shock cord comes with one plastic carbine hook installed; the other hook is installed after lacing shock cord through trampoline grommets. Cord is 1/4" diameter by 12'
Sold Each
https://murrays.com/products/washer-1-4-flat-stainless-steel-thin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-4016.jpg?v=1676950549
WASHER 1/4" FLAT (SS)
Washer 1/4 Flat Stainless Steel
Murrays Part# 19-4016
Thin, flat stainless steel washer measures 1/2" OD (outside diameter) x 1/4" ID (inside diameter)
https://murrays.com/products/yoke-stamping-only-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0063.jpg?v=1676950550
YOKE STAMPING ONLY (SS)
Yoke Stamping Only Stainless Steel
Murrays Part# 001-0063
Replacement yoke stamping for #01-0062 hiking stick yoke assembly. Compare to Hobie Cat® #3205.
https://murrays.com/products/4-spur-grommets-set-of-24
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/33-2015.jpg?v=1676950596
GROMMET #4 SPUR Set of 24
#4 Spur Grommets Set of 24
https://murrays.com/products/2-swage-it-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/2Swageitkit-handheldwirecrimp.jpg?v=1712183672
#2 SWAGE-IT KIT
#2 Swege-It Kit
Murrays PN 33-0012
The #2 Swage-It Kit includes swage-it tool for 1/16", 3/32" and 1/8" oval sleeves. Made in the USA.
https://murrays.com/products/4-handy-spur-grommet-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/33-1217.jpg?v=1679505495
GROMMET KIT #4 HEAVY DUTY KIT
#4 Handy Spur Grommet Kit - Hobie 2061 trampoline grommet kit
https://murrays.com/products/1-2-hollow-braid-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39-0861-1.jpg?v=1715122790
1/2" HOLLOW BRAID LINE
1/2″ Hollow Braid Line Hobie righting line Hobie part number RL012BLU
https://murrays.com/products/4-spur-grommets-set-of-144
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/33-2016.jpg?v=1676950600
GROMMET #4 SPUR Set of 144
#4 Spur Grommets Set of 144
https://murrays.com/products/11-snuffer-bag-i17-i18
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/1003-doubler-plate-new-style
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1013.jpg?v=1676950602
NACRA NEW STYLE 1003 DOUBLER PLATE
New-Style 1003 Doubler Plate
Murrays Part# 56-1013
New-style doubler plate for Inter #56-1003
Performance Sports factory item #1013
https://murrays.com/products/303-high-tech-fabric-guard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-6534-1.jpg?v=1676950612
303 FABRIC GUARD 16oz
303 FABRIC GUARD 16oz
https://murrays.com/products/303-aerospace-protectant-uv-protection-for-vinyl-rubber-fiberglass-and-plastic
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-030-1.jpg?v=1676950614
303 PROTECTANT PUMP 10OZ
303 AEROSPACE UV PROTECTANT PUMP 10 OZ
https://murrays.com/products/3m-5200-marine-adhesive-sealant-3-oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-5203.jpg?v=1679593444
3M 5200 ADHESIVE SEALANT 3OZ
3M 5200 Adhesive Sealant 3oz
Murrays Part# 40-5203
3M 5200 Marine Adhesive Sealant is the preferred choice for sealing masts. It goes on smoothly, won't sag, and remains workable for up to 4 hours. The seal is extremely strong and retains its strength above and below the waterline. The sealant provides incredible adhesion, yet stays flexible after it's cured. It becomes tack-free in 48 hours; completely cures in 5 to 7 days with no shrinkage. Clean up with kerosene or mineral spirits. 3 oz. tube. White.
https://murrays.com/products/3m-1-step-restorer-wax-32-oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-9005-1.jpg?v=1676950617
3M 1-STEP RESTORER & WAX 32 OZ
3M 1-STEP RESTORER WAX 32 OZ
https://murrays.com/products/3m-marine-adhesive-dual-lock-rectangle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/49-0051-3_1.png?v=1679593513
3M MARINE ADHESIVE DUAL LOCK-RECTANGLE
3M Marine Adhesive Dual Lock Rectangle
Murrays Part# 49-0051-3
3M's Dual-Lock™ Adhesive Mount is five times stronger than conventional hook and loop fasteners. The industrial-strength adhesive holds backing securely in place and offers convenient, semi-permanent mounting of the Velocitek SC-1 and SpeedPuck. It is also useful for attaching other marine electronics, securing cabinets and doors below deck, and keeping loose items secure until they are needed.
https://murrays.com/products/3m-marine-silicone-sealant-3-oz-clear
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-8019.jpg?v=1676950619
3M SILICONE SEALANT 3OZ CLEAR
3M Silicone Sealant 3oz Clear
Murrays Part# 40-8019
A mildew-resistant, non-sagging, moisture-curing silicone rubber sealant that remains flexible and has excellent resistance to the marine environment. Adheres to bare and painted metal, fiberglass, glass, non-oily woods, many plastics and abraded rubber. Clear sealant comes in a 3-oz. tube. Hobie Cat® uses #376 for this item.
https://murrays.com/products/3m-vinyl-cleaner-restorer
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-9023.jpg?v=1679593727
3M VINYL CLEANER/RESTORER
3M Vinyl Cleaner and Restorer is a marine grade cleaning wax that cleans, shines, conditions and protects in one easy step. Deep cleans dirt and grime from vinyl, rubber and plastic surfaces, while leaving behind a natural carnauba wax protective coating. Fresh lemon scent. 15 oz. trigger spray.
https://murrays.com/products/84-hobie-fiberglass-tiller-extension
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20550001-1.jpg?v=1676950628
HOBIE 14/16 FIBERGLASS TILLER
Fiberglass Tiller H14/16
Murrays Part# 50-20550001
84" Hobie Fiberglass Tiller Extension
The 84" Hobie Fiberglass Tiller Extension is the Hobie factory 84" fiberglass tiller extension with hinge for the Hobie 14 or 16. This stick can be cut to 60" for Getaway or Wave.
https://murrays.com/products/airush-knotless-ball-package-of-6
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/54-8094.jpg?v=1676950632
AIRUSH KNOTLESS BALL (6)
https://murrays.com/products/aquapac-belt-case-submersible
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/49-2828-1.jpg?v=1676950636
AQUAPAC BELT CASE 828
Aquapac Belt Case 828
Murrays Part# 49-2828
With Aquapac's ultimate compact camera case, it's no problem to go canyoning with your camera. Capture waterfalls from underneath and dive into pools without worry.
https://murrays.com/products/anchor-plate-h18sx-magnum-wings
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-68190001.jpg?v=1749768629
ANCHOR PLATE H18SX MAGNUM WINGS
https://murrays.com/products/aquapac-large-vhf-classic-case-submersible
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/49-2248-black-front-waterproof-radio-case-aquapac-510x510-1.jpg?v=1731427830
AQUAPAC LARGE VHF CLASSIC 248
AQUAPAC LARGE VHF CLASSIC 248
Murrays Part# 49-2248
https://murrays.com/products/aquapac-small-armband-case-submersible
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/49-2216.jpg?v=1676950639
AQUAPAC SMALL ARM CASE 216
The Aquapac Small Armband case with super-strong armbands fits phones, walkie-talkies and GPS units. Carry your electronics on your arm, leaving you free to kite-surf, raft or engage in any other activity in which you want to immerse yourself. This case works best with small phones and micro-radios. This case fits all the same devices as the Mini Whanganui (49-2108), with a maximum device size is 5" tall with a circumference of 6".
https://murrays.com/products/aquapac-large-phone-case-iphone-plus
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/49-2358.png?v=1676950640
AQUAPAC LARGE PHONE CASE
Aquapac Large Phone Case
Murrays Part# 49-2358
https://murrays.com/products/aquapac-small-vhf-classic-case-submersible
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/49-2228-black-front-waterproof-radio-case-aquapac-510x510-1.jpg?v=1731428475
AQUAPAC SMALL VHF CASE 228
Aquapac Small VHF Case 228
Murrays Part# 49-2228
https://murrays.com/products/aquapac-small-vhf-pro-case-submersible
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/49-2228-black-front-waterproof-radio-case-aquapac-510x510-1_b64d9e13-9656-41f1-a78c-901736a4342d.jpg?v=1731428538
AQUAPAC SMALL VHF PRO 229
Aquapac Small VHF Pro 229
Murrays Part# 49-2229
https://murrays.com/products/aquaseal-75-oz-package-with-cotol-5-oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/38-1912_cf8b1681-d285-451f-9658-417d105bf5bc.png?v=1676950646
AQUASEAL .75oz PACKAGE WITH COTOL .5OZ
https://murrays.com/products/arriba-cork-ball-grip-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Corkball.jpg?v=1676950649
ARRIBA CORK BALL GRIP KIT
ARRIBA CORK BALL GRIP KIT
Murrays Part# 44-0002
The Cork Ball Grip Kit replaces the stock Arriba, Murrays Aluminum Tiller and Hot Stick end grips. The ball is predrilled, lightweight and makes the hiking stick easier to hold. The inside diameter is 1-1/8". Epoxy adhesive is included. Hobie Cat® item #FXGRIP.
Order epoxy (#00-0002-1) to "caramel-coat" the cork ball handle to make it last longer
https://murrays.com/products/assembly-manual-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-37450011.jpg?v=1685145530
GETAWAY ASSEMBLY MANUAL
Getaway Assembly Manual
Murrays Part# 50-37450011
Hobie factory assembly manual for the Getaway.
https://murrays.com/products/assembly-manual-h14
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-13450000.png?v=1685145605
H-14 ASSEMBLY MANUAL
H14 Assembly Manual
Murrays Part# 50-13450000
Printout of the H14 assembly manual PDF.
https://murrays.com/products/assembly-manual-h17-sport
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-52450011.jpg?v=1676950648
H-17 SPORT ASSEMBLY MANUAL
H17 Sport Assembly Manual
Murrays Part# 50-52450011
Hobie® factory assembly manual for the Hobie 17 Sport.
The manual is also available for free download at the Hobie Cat® Web site.
https://murrays.com/products/assembly-manual-h17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50450001.jpg?v=1676950649
H-17 ASSEMBLY MANUAL
H17 Assembly Manual
Murrays Part# 50-50450001
Printout of Hobie 17 assembly manual PDF.
https://murrays.com/products/assembly-manual-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-23450000-1.jpg?v=1676950649
H-16 ASSEMBLY MANUAL
H16 Assembly Manual
Murrays Part# 50-23450000
Hobie Cat® factory manual for the Hobie 16®.
The manual is also available for free download at the Hobie Cat® Web site.
https://murrays.com/products/assembly-manual-h18-h18sx
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-63450000.jpg?v=1676950653
H-18 ASSEMBLY MANUAL
H18 Assembly Manual
Murrays Part# 50-63450000
Printout of H18 assembly manual PDF.
https://murrays.com/products/assembly-manual-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-43450001.jpg?v=1676950653
H-20 ASSEMBLY MANUAL
H20 Assembly Manual
Murrays Part# 50-43450001
Printout of the Miracle 20 PDF. Includes tuning guide in the back.
https://murrays.com/products/assembly-manual-hobie-wave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-38450000.jpg?v=1685145664
WAVE ASSEMBLY MANUAL
Wave Assembly Manual
Murrays Part# 50-38450000
Hobie® factory assembly manual for the Wave catamaran.
The manual is also available for free download at the Hobie Cat® Web site.
https://murrays.com/products/back-up-casting-h18-bow-tang
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61120001.jpg?v=1676950655
H-18 BACK UP CASTING BOW TANG
Back Up Casting H18 Bow Tang
Murrays Part# 50-61120001
Hobie® factory replacement back up casting for Hobie® 18 bow tang.
https://murrays.com/products/backrest-end-cap-left-front-right-rear-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37660031.jpg?v=1676950657
GETAWAY WIND END CAP-FRONT LEFT, REAR RIGHT
Backrest End Cap Left Front Right Rear Getaway
Murrays Part# 50-37660031
Hobie® factory replacement end cap casting for Getaway backrest. Left front/right rear
https://murrays.com/products/backrest-end-cap-right-front-left-rear-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37660041.jpg?v=1676950658
GETAWAY WING END CAP-FRONT RIGHT, REAR LEFT
Getaway Wing End Cap-Front Right, Rear Left
Murrays Part# 50-37660041
Replacement end cap for Hobie Getaway wing assembly.
https://murrays.com/products/batten-cap-hobie-jib-leech-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-21333000-1.jpg?v=1676950669
HOBIE JIB BATTEN LEECH CAP (EA)
Batten Cap Jib Leech H16
Murrays Part# 50-2133000
Hobie® factory jib leech batten cap for Hobie® 16. For batten tie, use 18" of 1/8" Dacron® solid braid #39-0221.
These are also used on the top two battens of a Hobie Wave and the top batten of a Hobie 18 Mainsail.
Sold individually
https://murrays.com/products/batten-cap-hobie-main-luff
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-11322011.jpg?v=1676950671
MAIN LUFF BATTEN CAP (EA)
Batten Cap Main Luff (EA)
Murrays Part# 50-11322011
Main luff batten cap for Hobie Cats are sold individually. Order batten tie separately; 18" of line per batten cap is standard. Hobie® factory replacement part.
https://murrays.com/products/batten-cap-hobie-main-leech
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/11323000_1_z204.jpg?v=1726184134
HOBIE MAIN LEECH BATTEN CAP
Batten Cap Hobie Main Leech
Murrays Part# 50-11323000
Hobie® factory replacement part number 11323000.
Hobie batten cap are sold individually.
Order batten tie separately; 18" of 1/8" line per batten cap is standard.
Sold individually
https://murrays.com/products/batten-cap-rbs-10-x-8mm
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/batten-cap-rbs-10-x-7mm
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/bbtalkin-multi-connector-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/52-2521.jpg?v=1732037154
BBTALKIN' MULTI CONNECTOR SET
BBTalkin' Multi Connector Set
Murrays Part# 52-2521
This connector is designed with our secure waterproof seal that screws into your BBTalkin' Unit. The end of this connector is a female 3.5mm jack. You can plug any male 3.5mm jack into this multi-connector. If you do not wish to use a BBTalkin' headset with your units, you can plug any earbud with microphone set up that has a 3.5mm male jack into this connector.
https://murrays.com/products/bbtalkin-sports-headset-v2-0
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/52-2511-1.jpg?v=1676950679
BBTALKIN' SPORTS HEADSET WITH HEADBAND V2.0
BBTalkin' Sports Headset with Headband V2.0
Murrays Part# 52-2511-1
Waterproof headset designed for BBTalkin' Bluetooth Waterproof communication devices. The headband is a lightweight design with a single sided speaker and boom microphone. This comes with an arm band for mounting the unit.
https://murrays.com/products/beam-strap-front-n6-0
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-3512-2.jpg?v=1676950682
NACRA FRONT BEAM STRAP
Front Beam Strap
Murrays Part# 56-3512
Front beam strap for Nacra 6.0
Nacra Sailing factory item# 30096
https://murrays.com/products/beam-strap-all-n5-0-5-7
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-3510-1.jpg?v=1676950683
NACRA FRONT BEAM STRAP
Beam Strap All N5.0 and 5.7
Murrays Part# 56-3510
Beam strap for front crossbars on all Nacra 5.0 and 5.7 models and rear crossbars on Nacra 5.0, 5.7 and 6.0. Nacra Sailing factory item #30095.
https://murrays.com/products/beam-strap-rear-n5-2-n5-5-n5-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-3509-2.jpg?v=1676950683
NACRA REAR BEAM STRAP
Beam Strap Rear N5.2, N5.5, N5.8
Murrays Part# 56-3509
Rear beam strap for Nacra 5.2, 5.5 and 5.8 is Nacra Sailing factory item #30094.
https://murrays.com/products/bearing-cage-roller-furler-drum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61930000.jpg?v=1676950686
H-18 JIB FURLER BEARING (CAGE)
H18 Jib Furler Bearing (Cage)
Murrays Part# 50-61930000
Hobie® factory replacement bearing cage for Hobie® roller furler drum #50-61900000.
Hobie Part# 61930000
https://murrays.com/products/bearing-race-hobie-roller-furler-drum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61920000.jpg?v=1676950776
H-18 JIB FURLER BEARING (RACE)
H18 Jib Furler Bearing (Race)
Murrays Part# 50-61920000
Hobie® factory replacement bearing race for Hobie roller furler drum.
Hobie Part# 61920000
https://murrays.com/products/block-hanger-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40760001.jpg?v=1676950687
H-20 BOOM BLOCK HANGER
Block Hanger H20
Murrays Part# 50-40760001
Hobie® factory replacement block hanger for Hobie® 20.
Hobie part# 40760001
https://murrays.com/products/black-low-stretch-8-strand-line-5-32
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/39-2302bk.jpg?v=1676950689
5/32" LOW STRETCH 8-STRAND 4MM
https://murrays.com/products/boeshield-t-9-4-oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/T-9_Boeshield_4oz_was_developed_by_The_Boeing_Company_for_lubrication_and_protection_of_aircraft_components._It_is_a_combination_of_solvents_lubricants_and_waxes_designed_for_penetration_moisture_displ.jpg?v=1775509317
T-9 BOESHIELD 4oz
T-9 Boeshield 4oz was developed by The Boeing Company for lubrication and protection of aircraft components. It is a combination of solvents, lubricants, and waxes designed for penetration, moisture displacement, lubrication and protection. Boeshield T-9® dries to a thin waxy film that clings to metal for months. It will loosen rusty and corroded parts and is safe on paints.
https://murrays.com/products/bolt-10-x-50
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/bolt-3-8-16-x-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8040501.jpg?v=1679609586
BOLT 3/8-16 X 2"
Bolt 3/8-16 X 2"
Murrays Part# 50-8040501
Replacement stainless steel 3/8-16 x 2" bolt is used on Hobie® 18 front and rear crossbars.
Hobie Part# 8040501
https://murrays.com/products/bolt-3-8-16-x-5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8040061.jpg?v=1676950696
BOLT 3/8-16 X 5"
Bolt 3/8-16 X 5"
50-8040061
Hobie® factory 3/8-16 x 5" bolt is used on Hobie 20 Miracle front crossbar.
Hobie Part# 8040061
https://murrays.com/products/bolt-5-16-18-x-2-hx-hd
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8040331.jpg?v=1679512184
BOLT 5/16-18 X 2"
Bolt 5/16-18 X 2"
Murrays Part# 50-8040331
Replacement 5/16-18 x 2" bolt is used as a rudder bolt on Hobie® Pre-EZ Lock Rudder System.
Hobie Part# 8040331
https://murrays.com/products/bolt-front-beam-3-8-x-4-5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F180.jpg?v=1718811444
NACRA BOLT FRONT BEAM 3/8-16X4.5"
Inter Bolt Front Beam 3/8-16X4.5"
Murrays Part# 56-F180
Socket head 3/8 x 4-1/2" front beam bolt for all Inters
Compatible Boats: Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS.
Performance part# F180
https://murrays.com/products/bolt-5-16-18-x-3-5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8040371-1.jpg?v=1676950699
BOLT 5/16 X 18 X3.5"
Bolt 5/16 X 18 X3.5"
Murrays Part# 50-8040371
Hobie® factory replacement 5/16-18 x 3-7/16" bolt. Pylon bolt for Hobie® 14 and older 16 (1994 and prior; starting in 1995, boats had newer style castings/pylons).
Hobie Part# 8040371
https://murrays.com/products/bolt-for-gudgeon-1-4-x-1-25
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F117.jpg?v=1718810698
NACRA/PRINDLE BOLT FOR GUDGEON 1/4-20X1.25"
https://murrays.com/products/bolt-hex-3-8-x-4-25-prindle-crossbar
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F142.jpg?v=1718811496
PRINDLE HEX BOLT 3/8 X 4.25"
Hex Bolt 3/8 X 4.25"
Murrays Part# 56-F142
3/8" x 4-1/4" hex head bolt is for Prindle front crossbar
Performance Sports factory item# F142
https://murrays.com/products/bolt-rear-beam-3-8-x-4-5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-F181.jpg?v=1676950703
NACRA REAR CROSSBAR BOLT 3/8-16X4.5"
Rear Crossbar Bolt 3/8-16X4.5 Hex Head
Murrays Part# 56-F181
Rear crossbar bolt for Inters, Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS.
Performance Sports factory item# F181
https://murrays.com/products/bolt-hex-5-16-18-x-1-for-07-1953
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8040171-1.jpg?v=1676950705
BOLT HEX 5/16-18 X 1"
Bolt Hex 5/16-18 X 1"
Murrays Part# 50-8040171
Hobie® factory hex head bolt measures 5/16-18 x 1". Used on #07-1953 Tiller Connector for Hobie® 20.
Hobie Part# 8040171
https://murrays.com/products/bolt-rudder-hold-down-inter
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-F155.jpg?v=1676950706
NACRA BOLT RUDDER HOLD DOWN
Bolt Rudder Hold Down
Murrays Part# 19-3011
Rudder hold down bolt for Inters is Nacra Sailing factory Part# 30357
https://murrays.com/products/bolt-socket-head-3-8-16-x-2-50
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-8040521-1.jpg?v=1737660916
BOLT 3/8-16 X 2.50"
Bolt Socket Head 3/8-16 X 2.50"
Murrays part# 50-8040521
Hobie® factory replacement 3/8-16 x 2.50" socket head bolt is used on Getaway wing and Hobie® 18 rear inboard support.
Hobie Part# 8040521
https://murrays.com/products/bolt-socket-head-3-8-16-x-3-75
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8040561.jpg?v=1679609875
BOLT SOC HEAD 3/8-16 X 3.75"
Bolt Socket Head 3/8-16 X 3.75"
Murrays Part# 50-8040561
Hobie® factory replacement 3/8-16 x 3.75" socket head bolt.
Applications:
Hobie 18 inboard front crossbar
https://murrays.com/products/bonez-board-stackers-pair
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/41-3022.jpg?v=1679609352
BONEZ BOARD STACKERS (PAIR)
https://murrays.com/products/book-catamaran-racing-for-the-90s
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/45-0052.jpg?v=1676950710
BOOK: CATAMARAN RACING FOR THE 90'S
Book: Catamaran Racing for the 90's
Murrays Part# 45-0052
It may be the 2000's, but this book is still relevant to today's cat sailor. Improve your sailing in any or all of the 21 major subjects covered in this manual.
https://murrays.com/products/book-fiberglass-boat-repair-maintenance
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/45-1030-1.jpg?v=1676950711
BOOK: FIBERGLASS BOAT REPAIR AND MAINTENANCE
Book: Fiberglass Boat Repair & Maintenance
Murrays Part# 45-1030
https://murrays.com/products/book-freestyle-windsurfing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/45-0181-1.jpg?v=1679611346
BOOK: FREESTYLE WINDSRFING
Book: Freestyle Windsurfing
Murrays Part# 45-0181
Includes explanations and hints, along with hundreds of photographs, demonstrating moves suitable for beginners as well as advanced freestylers. The 128-page paperback book by Roger Jones has a copyright date of 1983. Limited to stock on hand.
https://murrays.com/products/book-sailing-drills-by-rick-white
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/45-0053-1.jpg?v=1676950715
BOOK: SAILING DRILLS BY RICK WHITE
Book: Sailing Drills
Murrays Part# 45-0053
Rick White and Mary Wells of Rick White's Sailing Seminars have compiled a book of drills that dissect sailing and racing. These intensified drills can eliminate years of improper practice time, years of trial and error, years of following others around the course, and years of disappointment! 160 pages. ©1995. Paperback.
https://murrays.com/products/book-the-hobie-18-reg-performance-manual
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/45-0031.jpg?v=1679675172
H-18 PERFORMANCE MANUAL
https://murrays.com/products/boom-assembly-h17-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50510000.jpg?v=1676950716
H-17 BOOM ASSEMBLY-BLACK
Boom Assembly H17 Black
Murrays Part# 50-50510000
Hobie® factory replacement black boom assembly for Hobie® 17.
Hobie part# 50510000
https://murrays.com/products/boom-assembly-h16-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/20720011_4_z166.jpg?v=1725651663
H-16 BOOM ASSEMBLY-BLACK
Boom Assembly H16 Black
Murrays Part# 50-20720011
Black boom assembly for Hobie® 16 includes end caps, block hanger, and barrel cleat. Order gooseneck assembly separately. This boom is normally a special order item.
Hobie Part# 20720011
https://murrays.com/products/boom-block-hanger-hobie
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/10760000_2_z144.jpg?v=1725652049
HOBIE BOOM BLOCKER HANGER
Hobie Boom Blocker Hanger
Murrays Part# 50-10760000
Hobie factory boom block hanger for the Hobie 14, 16, 17 and 18.
Hole spacing is 1-1/8".
Use four 6-4 rivets (#19-5031) for installation.
https://murrays.com/products/boom-assembly-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40721001.jpg?v=1676950724
H-20 BOOM ASSEMBLY
https://murrays.com/products/boom-end-cap-h14-h16-aft
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/10741031z103.jpg?v=1725651846
H14/16 AFT BOOM END CAP
H14/16 Boom End Cap AFT
Murrays Part# 50-10741031
Replacement rear boom end cap for Hobie® 14 or 16. Use two 6-6 rivets (#19-5032) for installation.
Hobie® Part# 10741031
https://murrays.com/products/boom-end-cap-front-nacra-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-7902.jpg?v=1676950726
NACRA/PRINDLE FRONT BOOM END CAP
Front Boom End Cap
Murrays Part# 56-7902
Front boom end cap for Nacra and Prindle cats.
Nacra Sailing factory item# 30204
https://murrays.com/products/boom-end-cap-h14-h16-forward
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/10740011_4_z26.jpg?v=1725652263
H-14/16 FORWARD BOOM END CAP
Boom End Cap H14/16 Forward
Murrays Part# 50-10740011
Hobie® factory replacement end cap for the forward end of Hobie® 14 or 16 boom. Also for Hobie® 21SC. Use three #19-5032 6-6 rivets for installation.
https://murrays.com/products/boom-end-cap-h17-forward
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50512001.jpg?v=1676950729
H-17 FORWARD BOOM END CAP
Boom End Cap H17 Forward
Murrays Part# 50-50512001
Hobie® factory replacement forward end cap for Hobie 17 boom.
https://murrays.com/products/boom-end-cap-h17-aft
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50513011.jpg?v=1676950730
H-17 BOOM END CAP
H17 Boom End Cap
Murrays Part# 50-50513011
Hobie® factory replacement aft end cap for Hobie 17.
https://murrays.com/products/boom-end-cap-h20-forward
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40741021.jpg?v=1676950732
H-20 FORWARD BOOM END CAP
Boom End Cap H20 Forward
Murrays Part# 50-40741021
Hobie® factory replacement end cap for forward end of Hobie 20 boom.
Hobie part# 40741021
https://murrays.com/products/boom-end-cap-h18-forward
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60751010.jpg?v=1676950733
H-18 FORWARD BOOM END CAP
Boom End Cap H18 Forward
Murrays part# 50-60751010
Hobie® factory replacement forward end cap for Hobie 18 boom.
https://murrays.com/products/boom-end-cap-rectangular-rear-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-7903.jpg?v=1676950734
NACRA/PRINDLE REAR BOOM END CAP
Rear Boom End Cap
Murrays Part# 56-7903
Rectangular rear boom end cap casting for Nacra 5.2 and all Prindles.
Nacra Sailing factory item# 30205
https://murrays.com/products/boom-end-cap-h18-aft
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60760011.jpg?v=1676950736
H-18 AFT BOOM END CAP
Boom End Cap H18 Aft
Murrays Part# 50-60760011
Hobie® factory replacement aft end cap for Hobie 18 boom.
Hobie part# 60760011
https://murrays.com/products/boom-outhaul-car-assembly-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60220001.jpg?v=1676950737
H-18 BOOM OUTHAUL CAR ASSEMBLY
H18 Boom Outhaul Car Assembly
Murrays Part# 50-60220001
Hobie® factory replacement outhaul car assembly for Hobie® 18.
Outhaul and shock cord are not included. For outhaul line, order 7' of 3/16" black line #39-2311BK. For outhaul shock cord, order 7' of #39-7491 black 1/4" shock cord.
https://murrays.com/products/boom-outhaul-car-prindle-inter
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-7907.jpg?v=1676950740
PRINDLE/NACRA/INTER BOOM OUTHAUL CAR
Boom Outhaul Car
Murrays Part# 56-7907
Internal boom outhaul car for all Prindles, Nacra 5.2 and Inters.
Nacra Sailing factory item# 30206
https://murrays.com/products/boom-outhaul-car-bearing-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60240000.jpg?v=1676950741
H-18 BOOM OUTHAUL BEARING
Boom Outhaul Bearing H18
Murrays Part# 50-60240000
Boom bearing for Hobie 18 outhaul system
https://murrays.com/products/boomlet-hc17-se-to-sport-conversion
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-52722011-300x35-1.jpg?v=1676950741
H-17SE TO SPORT BOOMLET CONVERSION
Boomlet HC17 SE to Sport Conversion
Murrays part# 50-52722011
Make it much easier to move from one side of a Hobie® 17 to the other while tacking or jibing by removing the boom. Easily convert 1995 and newer Hobie® 17 SE race boats by adding the Hobie factory Boomlet.
Hobie part# 52722011
https://murrays.com/products/boom-retainer-clip-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8060151.jpg?v=1676950745
H-20 BOOM RETAINER CLIP
H20 Boom Retainer Clip
Murrays Part# 50-8060151
Hobie® factory replacement boom retainer clip for Hobie 20.
Hobie Part# 8060151
https://murrays.com/products/bow-eye-screw-inter-18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1805.jpg?v=1676950746
NACRA BOW EYE SCREW
Bow Eye Screw
56-1805
Factory stainless steel bow eye screw for Inter 18
https://murrays.com/products/bow-spreader-pole-wave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-38999021.jpg?v=1676950749
WAVE BOW SPREADER POLE
Bow Spreader Pole Wave
Murrays Part# 50-38999021
Hobie® factory replacement bow spreader pole only for Wave.
Hobie Part# 38999021
https://murrays.com/products/bow-foil-end-tang
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9667.jpg?v=1676950750
NACRA BOW FOIL END TANG
Bow Foil End Tang
Murrays part# 56-9667
End tang for bridle foil attachment i
Nacra Sailing factory item #30306
https://murrays.com/products/bow-tang-h14-h16-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/20120000-bow-tang.jpg?v=1676950751
H-14/16 BOW TANG
H14/16 Bow Tang
Murrays Part# 50-20120000
Hobie® factory replacement bow tang for Hobie® 14, 16 or Getaway. Use #19-3530 screw and #19-2520 nylock nut on Hobie 16; use #19-3530 screw on Hobie 14.
The original Hobie® 14 tang is no longer available.
20120010
https://murrays.com/products/bracket-hull-cradle-aft
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-48020001.jpg?v=1676950752
HOBIE HULL CRADLE BRACKET
Hobie Hull Cradle Bracket
Murrays Part# 50-48020001
Sold individually
https://murrays.com/products/bow-tang-p15-p16-p18-escape
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1810.jpg?v=1676950754
PRINDLE/ESCAPE BOW TANG
Bow Tang
Murrays Part# 56-1810
Bow tang for Prindle 15, 16, 18 and Escape
Nacra Sailing factory item# 30386
https://murrays.com/products/bracket-h18sx-wing-strut
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-91490010.jpg?v=1737759133
H-18SX BRACKET WING STRUT
H18SX Bracket Wing Strut
Murrays Part# 50-91490010
This is the bracket that the rear support arm of an H18SX wing uses. One is mounted to the wing and one is mounted to the rear hull of an H18SX per wing.
Hobie Part# 91490010
https://murrays.com/products/bridle-eye-f18-infusion
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1865.jpg?v=1676950756
NACRA BRIDLE EYE
Bridle Eye
56-1865
Factory replacement bridle eye for F18 Infusion.
https://murrays.com/products/bridle-foil-end-casting-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9662.jpg?v=1676950757
NACRA BRIDLE FOIL END CASTING
Bridle Foil End Casting
Murrays Part# 56-9662
Black end cap casting for Nacra bridle foil assembly.
Nacra Sailing factory# 30302
https://murrays.com/products/bridle-foil-rod-with-screw-adjuster-nacra-5-8na-6-0na
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9669.jpg?v=1676950759
NACRA 5.8, 6.0 BRIDLE FOIL ROD WITH SCREW ADJUSTER
Bridle Foil Rod with Screw Adjuster
N5.8, 6.0
Murrays Part# 56-9669
https://murrays.com/products/brindle-pole-tang-p19mx
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1043.jpg?v=1676950763
PRINDLE BRIDLE POLE TANG
Brindle Pole Tang P19MX
Murrays Part# 56-1043
The bridle pole tang is part of the Prindle 19MX Conversion Kit. Performance Sports factory item #1043 is limited to stock on hand.
https://murrays.com/products/bushing-rudder-pin-for-euro-casting
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-F99220113.jpg?v=1676950765
BUSHING RUDDER PIN FOR EURO CASTING
Bushing Rudder Pin for Euro Casting
Murrays Part# 50-F99220113
https://murrays.com/products/carbon-snuffer-pole-extension-27
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9638.jpg?v=1676950767
NACRA CARBON SNUFFER POLE EXTENSION 27"
27" Carbon Snuffer Pole Extension
Murrays Part# 56-9638
Carbon 27" snuffer pole extension with ferrule and end cap
Performance Sports factory item# 9638
https://murrays.com/products/cat-keels-kit-west-systems-epoxy
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/40-4105.jpg?v=1696962611
CAT KEELS KIT WEST SYS EPOXY
Murrays fiberglass hull repair kit for Hobie, Nacra and Prindle catamarans
https://murrays.com/products/centerboard-handle-h17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50702001.jpg?v=1676950772
H-17 CENTERBOARD HANDLE
Centerboard Handle H17
Murrays Part# 50-50702001
No longer available - Discontinued by Hobie
Hobie Part# 50702001
https://murrays.com/products/center-post-bridle-foil-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9663.jpg?v=1676950773
NACRA CENTER POST BRIDLE FOIL
Nacra Center Post Bridle Foil
Murrays Part# 56-9663
Center post for Nacra bridle foil. Performance Sports factory #9663
Nacra Sailing #30303.
https://murrays.com/products/centerboard-lock-screw-p18-2-p19
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56--F144.jpg?v=1679680352
PRINDLE CENTERBOARD LOCK SCREW 10-32X1" FHMS
Centerboard Lock Screw 10-32X1" FHMS
Murrays Part# 56-F144
#10-32 X 1" FMHS centerboard lock screw for Prindle 18.2 and 19
https://murrays.com/products/centerboard-pivot-pin-h17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50104001.jpg?v=1676950775
H-17 CENTERBOARD PIVOT PIN
Centerboard Pivot Pin H17
Murrays Part# 50-50104001
Hobie® factory replacement centerboard pivot pin for Hobie® 17
Hobie Part# 50104001
https://murrays.com/products/centerboard-spring-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1027-2_Prindle_Factory_centerboard_spring_kit_for_Prindle_18.2_and_19_includes_4_springs._Performance_Sports_factory_item_1027..jpg?v=1733856856
PRINDLE CENTERBOARD SPRING KIT
Centerboard Spring Kit
Prindle Factory centerboard spring kit for Prindle 18.2 and 19 includes 4 springs. Performance Sports factory item #1027.
https://murrays.com/products/centerboard-pivot-tube-pvc
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1029-1-rotated.jpg?v=1676950777
PVC CENTERBOARD PIVOT TUBE
PVC Centerboard Pivot Tube
Murrays Part# 56-1029
PVC centerboard pivot tube is Performance Sports factory item #1029
https://murrays.com/products/centerboard-spring-h17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50350140.jpg?v=1676950779
H-17 CENTERBOARD SPRING
Centerboard Spring H17
Murrays Part# 50-50350140
Hobie® factory replacement centerboard spring for Hobie 17
Hobie Part# 50350140
https://murrays.com/products/chain-plate-turbo
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10300000-1.jpg?v=1676950780
H-14 CHAIN PLATE "TURBO"
Chain Plate "Turbo"
Murrays Part# 50-10300000
Hobie® factory replacement chain plate for Hobie® 14 Turbo. Use three 6-4 rivets (#19-5031) for installation.
https://murrays.com/products/channel-retaining-plate-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie-61110000-channel-retaining-plate.jpg?v=1732143902
H-18 CHANNEL RETAINING PLATE
HOBIE 18 CHANNEL RETAINING PLATE
HOBIE PART NUMBER 61110000
https://murrays.com/products/chain-plate-wave-club-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39100011_3_z26.jpg?v=1725924152
WAVE/GETAWAY SHROUD ANCHOR PLATE
Wave/Getaway Shroud Anchor Plate
Murrays Part# 50-39100011
Hobie® factory replacement shroud anchor chain plate for Club Wave or Getaway. The Club Wave has a three-piece trampoline and shrouds and bridles connect with clevis pins. Current boats use two plates per side.
Hobie Part# 39100011
https://murrays.com/products/clamcleat-kitebar-depower-cleat-cl826
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/clamcleat-cl826-27-0826.jpg?v=1676950783
CLAMCLEAT KITEBAR DEPOWER CLEAT
The ClamCleat Kiteboard depower cleat - CL826 is the most trusted cleat in the kiteboarding industry. ClamCleat has called it the Aero and Racer Back Cleat. The CL826 has been a stock item on many production kitebars since the inception of the sport, and is the most commonly used cleat on custom race bars. One of the great functions of this cleat is that it is easy to move up and down the sheeting line to adjust the bar throw and sheeting range.
https://murrays.com/products/clevis-pin-1-4-x-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8020401.jpg?v=1676950784
CLEVIS PIN 1/4 X 1"
Clevis Pin1/4 X 1"
Murrays Part# 50-8020401
Hobie® factory replacement 1/4" x 1" clevis pin.
Compare to Hobie Part Number 8020411
Applications:
H18 / Hobie 18 SX
Tiller Yoke Clevis Pin: 1
https://murrays.com/products/clevis-pin-1-4-x-83
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8020391.jpg?v=1676950785
CLEVIS PIN 1/4 X .83"
Clevis Pin 1/4 x .83"
Murrays Part# 50-8020391
Hobie® factory clevis pin measures 1/4" diameter x .8285" grip length (shoulder to the split ring hole).
https://murrays.com/products/clevis-pin-1-4-x-2-1-4-all-inters
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4587-1-rotated.jpg?v=1676950787
CLEVIS PIN 1/4 x 2 1/4"
Clevis Pin 1/4 x 2-1/4"
Murrays Part# 56-4587
1/4 x 2-1/4" clevis pin for all Inter rudder assemblies.
Used to hold tiller crossbar assembly to tendon.
Nacra sailing factory item# 30428
https://murrays.com/products/clevis-pin-5-16-x-2-2-upper
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8020101.jpg?v=1676950788
CLEVIS PIN 5/16 X 2.2" UPPER
Clevis Pin 5/16 X 2.2" Upper
Murrays Part# 50-8020101
Hobie® factory replacement 5/16" diameter x 2.2" clevis pin
https://murrays.com/products/clevis-pin-1-4-x-3-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4012-rotated.jpg?v=1676950789
CLEVIS PIN 1/4 X 3/4"
Clevis Pin 1/4 X 3/4"
Murrays Part# 56-4012
The Clevis Pin 1/4 X 3/4" is used on Prindle rudders, Nacra mast head sheave and as Nacra/Prindle shroud pin.
Prindle Part# 4012
https://murrays.com/products/clevis-pin-5-16-x-2-3-16-all-inters-hobie-21se
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4586-1.jpg?v=1751317933
CLEVIS PIN 5/16 x 2 3/16"
Clevis Pin 5/16 x 2-3/16"
Murrays Part# 56-4586
Uses:
This 5/16" x 2-3/16" clevis pin is for all Inter rudder assemblies.
Mast step pin for Hobie 21SE 21SC
Nacra sailing factory item# 30427
Same as Hobie Part# 8020611
https://murrays.com/products/compression-sleeve-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-61490000.jpg?v=1737759288
H-18 COMPRESSION SLEEVE
H18 Compression Sleeve
Murrays Part# 50-61490000
Hobie® factory replacement compression sleeve for mast of Hobie 18.
https://murrays.com/products/compression-plate-assembly-kit-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60680001.jpg?v=1676950793
H-18 COMPRESSION PLATE ASSEMBLY KIT
Compression Plate Assembly Kit H18
Murrays Part# 50-60680001
Hobie® factory mast compression plate assembly kit for Hobie 18 and 18SX
https://murrays.com/products/comptip-assembly-h14
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10582100.jpg?v=1676950793
H-14 COMP-TIP ASSEMBLY NOS
H14 Comp-tip Assembly
Murrays Part# 50-10582100
Hobie® factory CompTip assembly for Hobie 14.
https://murrays.com/products/comptip-assembly-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/20611100.jpg?v=1676950794
HOBIE 16 COMP-TIP ASSEMBLY
Comp-Tip Assembly H16
Murrays Part# 50-20611100
New Comp Tip assembly for Hobie 16.
Hobie Part# 20611100
https://murrays.com/products/comptip-luff-track-87-no-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38584001_1_z162.jpg?v=1726087023
H-14/18/18SX/20/WAVE COMP-TIP LUFF TRACK
H14/18/18SX/20/Wave Comp-tip Luff Track 87"
Murrays Part# 50-38584001
Hobie factory replacement 87" luff track for Hobie Cats except Hobie 16 and Getaway.
Older H18 comp tips were one long piece of plastic, newer boats have two sections. This plastic piece, and shorter aluminum piece. If you are replacing an older one piece luff track, you will also need to purchase the aluminum top section as well.
https://murrays.com/products/comptip-luff-track-h16-93
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20616001-1.jpg?v=1676950797
H-16 COMP-TIP LUFF TRACK
H16 Comp Tip Luff Track
Murrays Part# 50-20616001
Hobie® factory replacement 93" luff track for Hobie® 16 with CompTip on mast.
https://murrays.com/products/comptip-mast-head-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20614001-1.jpg?v=1676950798
H-16 COMP-TIP MAST HEAD
Comp-Tip Mast Head H16
Murrays Part# 50-20614001
Hobie® factory replacement mast head with sheaves. Use four #19-5032 6-6 rivets for installation. This is the standard Hobie Part that comes with all comptip masts on Hobie 16s.
This CompTip mast head also replaces the obsolete Hobie 16 mast head (no longer available) for all-aluminum mast. The original halyard will work if you move the halyard hook down to the appropriate height. Alternatively, a new comptip halyard #02-0273-60
https://murrays.com/products/cooler-lid-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/37370020.jpg?v=1676950799
GETAWAY COOLER LID
Cooler Lid Getaway
Murrays Part# 50-37370021
Hobie Part# 37370020
(formerly 37370021)
https://murrays.com/products/comptip-mast-head-sheave-for-hobie-16-or-wave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/20614210_3_-copyz258.jpg?v=1726088715
H-16/WAVE COMP-TIP MAST HEAD SHEAVE
Comp-Tip Mast Head Sheave for H16 Wave
Murrays Part# 50-20614210
CompTip Mast Head Sheave for Hobie 16 or Wave, is the sheave found at the top of the comptip assembly. Two sheaves are used in each assembly. The sheaves each ride on a, comptip sheave spacer.
The sheave is 9/16" wide x 2 1/4" diameter with 3/8" hole.
The larger sheave for the obsolete mast head for all-aluminum mast is no longer available.
Hobie Part number 20614210
https://murrays.com/products/corner-casting-front-left-black-h14-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10150011-2.jpg?v=1676950802
H-14/16 CORNER CASTING FRONT LEFT-BLACK
Corner Casting Front Left Black H14/16
Murrays Part# 50-10150011
Hobie® factory replacement left front corner casting (#1) for Hobie® 14 or 16. Requires six 6-8 rivets (item #19-5033) for installation
https://murrays.com/products/cotter-pin-for-traveler-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8060121.jpg?v=1676950803
H-18 COTTER PIN FOR TRAVELER
H18 Cotter Pin for Traveler
Murrays Part# 50-8060121
Hobie® factory replacement 3/32" x 2" stainless steel cotter pin is used on Hobie 18 main traveler car.
Hobie Part# 8060121
https://murrays.com/products/corner-casting-race-rear-left-black-h14-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10212011.jpg?v=1679681270
H-14/16 CORNER CASTING REAR LEFT-RACE BLACK
H14/16 Corner Casting Race Rear Left Black
Murrays Part# 50-10212011
Hobie® factory replacement left rear corner casting (#4) for Hobie® 14 or 16. This part replaces Hobie Cat's discontinued item #10210011. Use six 6-8 rivets (#19-5033) for installation.
https://murrays.com/products/corner-casting-race-rear-right-black-h14-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10202011.jpg?v=1679681324
H-14/16 CORNER CASTING RACE REAR RIGHT
Corner Casting Race Rear Right H14/16
Murrays Part# 50-10202011
Hobie® factory replacement left rear corner casting (#3) for Hobie® 14 or 16. This part replaces Hobie Cat's discontinued item #10200011. Use six 6-8 rivets (#19-5033) for installation.
Rear Crossbar casting for Hobie 16.
https://murrays.com/products/crossbar-backup-plate-h17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50253001.jpg?v=1676950807
H-17 REAR CROSSBAR BACKUP PLATE
H17 Rear Crossbar Backup Plate
Murrays Part# 50-50253001
Backup plate for Hobie 17 rear crossbar assembly.
Hobie Part# 50253001
https://murrays.com/products/crossbar-casting-front-right-h18-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60150011.jpg?v=1680204698
H-18 CROSSBAR CASTING FRONT RIGHT-BLACK
Crossbar Casting Front Right H18-Black
Murrays Part# 50-60160011
Hobie® factory replacement right front crossbar casting for Hobie® 18
Hobie Part# 60160011
https://murrays.com/products/crossbar-insert-right-front-left-rear-h17-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50121511.jpg?v=1676950809
H-17 CROSSBAR INSERT RF/LR
Crossbar Insert Right Front & Left Rear H17 Black
Murrays Part# 50-50121511
Hobie® factory replacement right front/left rear crossbar insert for Hobie® 17
Hobie Part# 50121511
https://murrays.com/products/crossbar-h17-inboard-support
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50213201.jpg?v=1676950811
H-17 CROSSBAR INBOARD SUPPORT
Crossbar H17 Inboard Support
Murrays Part# 50-50213201
Hobie® factory replacement inboard support for Hobie® 17 crossbar
Hobie Part# 50213201
https://murrays.com/products/crossbar-plug-h17-set-of-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50262101.jpg?v=1676950811
H-17 CROSSBAR PLUG (4)
Crossbar Plug H17
Murrays Part# 50-50262101
Hobie® factory replacement plug (cap) set for Hobie® 17 Crossbar
Hobie Part# 50262101
Sold in a package of 4
https://murrays.com/products/dacron-solid-braid-1-8-white
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39-4503w.jpg?v=1715123079
1/8" DACRON SOLID BRAID
Use this 1/8″ Dacron line for batten tie line and roller furling systems. For batten ties, allow about 18″ of line for each batten. Sold per foot. Spool: 1000′ (304.9m). Compare to Hobie part number RH112WHT - 8004510
https://murrays.com/products/daggerboard-hold-down-tiger
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-F99501200.jpg?v=1676950821
TIGER DAGGERBOARD HOLD DOWN
Daggerboard Hold Down Tiger
50-F99501200
Hobie® factory daggerboard hold down for Tiger.
https://murrays.com/products/daggerboard-position-holding-system
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/dakine-hammerhead-spreader-bar-complete
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-0210.jpg?v=1704421550
DAKINE HAMMERHEAD KITEBAR 10"
https://murrays.com/products/dakine-kite-compression-bag
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/compression-bag.png?v=1676950834
DAKINE KITE COMPRESSION BAG
Dakine Kite Compression Bag
Murrays Part# 32-900675
Key Features for the Dakine Kite Compression Bag
-Replaces heavier stock kite bags reducing overall travel bag weight
-Shoulder carry strap for beach travel
-Lightweight nylon fabric
-Four compression webbing straps
-Highly visibility location for writing kite size
-210D Nylon
-Fits up to 12m 3 strut kites, 10m 5 strut kites and 16m single strut kites.
-Dimensions: 60 x 25 x 30cm
https://murrays.com/products/dakine-kainui-leash-12-with-qr-clip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/KAINUI6FTX5SIXTEENTHSINWEASYCLIP-BLACK-194626483511_10003910_BLACK-32X_MAIN_2000x_e6d8dd4c-55ee-4ab4-b978-ff11e9ec34c6.webp?v=1740766234
DAKINE KAINUI 12' SURF LEASH WITH EASY CLIP
Dakine Kainui 12' Surf Leash with Quick Release
Murrays Part# 32-1268
When the swell is pumping a couple feet overhead, you need a serious surf leash that will keep you tethered to your board in powerful waves. Dakine was founded with the goal of meeting this challenge, and it builds on this legacy with the twelve-foot-long Kainui with Easy Clip quick release.
https://murrays.com/products/dakine-hook-knife-with-sheath
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/dakine-kite-knife.png?v=1676950838
DAKINE HOOK KNIFE WITH SHEATH
Dakine Hook Knife with Sheath
Murrays Part# 32-919981
The DaKine hook knife uses two opposing stainless steel cutting blades with an anodized aluminum handle. Includes pocket sheath that is simple to mount anywhere on your harness or spreader bar for easy access. DaKine item #4620500.
Dakine's kite knife comes in a sheath with a belt loop that is easily stored on your harness or spreader bar for easy access. These are great for emergency use, and are a must for all kitesurfers to be able to cut li
https://murrays.com/products/dakine-pro-form-footstrap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Dakine-Pro-Form-Footstrap.png?v=1676950841
DAKINE PRO FORM FOOTSTRAP
https://murrays.com/products/dakine-primo-footstrap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/primo.jpg?v=1676950842
DAKINE PRIMO FOOTSTRAP-BLACK
https://murrays.com/products/dakine-stance-driver
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/32-3007.jpg?v=1706657546
DAKINE STANCE DRIVER
Dakine Stance Driver
Murrays Part# 32-3007
DaKine's Stance Driver tool includes all the essentials and helps eliminate finger strain and stripped screws.
Features:
6 piece ratchet driver
#2 and #3 Phillips
#2 and #3 posidrive
3/32" hex
1/4" flat head
39" [ 100cm ] tape measure
Blue only
Dakine item #2300005
https://murrays.com/products/dakine-twist-control-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/dakine-twist-control-1.jpg?v=1676950852
DAKINE TWIST CONTROL SYSTEM
https://murrays.com/products/decal-mast-caution-orange
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/13440010_4_z5.jpg?v=1726093827
ORANGE MAST CAUTION DECAL
Decal Mast Caution Orange
Murrays Part# 13440010
Hobie® factory decal attaches to mast as a reminder to watch for overhead power lines when sailing and/or launching your boat.
Hobie Part# 13440010
https://murrays.com/products/decal-sail-h14-class-insignia
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-12440000.jpg?v=1676950856
H-14 SAIL CLASS INSIGNIA
Decal Sail H14 Class Insignia
Murrays Part# 50-12440000
Hobie 14 round sail class insignia decal is a Hobie® factory replacement item.
Hobie Part# 12440000
https://murrays.com/products/decal-sail-h16-class-insignia
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-22330010.png?v=1679690788
H-16 INSIGNIA DECAL
H16 Insignia Decal
Murrays Part# 50-22330000
Hobie® 16 sail class insignia decal is a Hobie® factory replacement item.
https://murrays.com/products/delrin-rudder-set-screw-nacra-discontinued
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/detachable-chicken-bone
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/54-8014.jpg?v=1676950861
DETACHABLE CHICKEN BONE
https://murrays.com/products/detent-plunger-ez-loc-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20492021-1.jpg?v=1676950863
BRAVO/WAVE/GETAWAY DETENT PLUNGER EZ LOC SYSTEM
Detent Plunger EZ Lock System
Murrays Part# 50-20492021
Hobie Cat® factory detent plunger for EZ Loc rudder assembly.
Hobie Bravo, Getaway and Wave
Hobie Part# 20492021
https://murrays.com/products/diamond-spreader-tang-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61410000.jpg?v=1676950864
H-18 DIAMOND SPREADER TANG
H18 Diamond Spreader Tang
Murrays Part# 50-61410000
Hobie® factory replacement diamond spreader tang for Hobie® 18.
https://murrays.com/products/diamond-tang-lower-inter-nacra-500-570
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-6818.jpg?v=1738022969
NACRA LOWER DIAMOND TANG
Lower Diamond Tang
Murrays Part# 56-6818
Lower diamond tang for Inters and Nacra 500/570
Performance Sports Factory item# 6818
Nacra Sailing# 30196
https://murrays.com/products/diamond-wire-roller
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-61740000.jpg?v=1722264554
DIAMOND WIRE ROLLER
https://murrays.com/products/diamond-wire-tang
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61480000.jpg?v=1676950867
DIAMOND WIRE TANG
Diamond Wire Tang
Murrays Part# 50-61480000
Hobie® factory replacement diamond wire tang
Hobie Part# 61480000
https://murrays.com/products/diamond-tang-upper-for-nacra-carbon-mast
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/dielectric-silicone-compound
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-0350-1.jpg?v=1676950868
DIELECTRIC SILICONE COMPOUND 1/3oz
Dielectric Silicone Compound 1/3oz
Murrays Part# 40-0350
This marine grade dielectric silicone "grease" compound protects electrical connections by sealing out moisture, dirt, salt and corrosion. Uses include: plug connections on lifeguard/rescue services communication equipment, battery cable plugs connecting batteries to Torqeedo electric motors, outdoor electrical connections, electrical ignitions, and outdoor lighting. Effective from -40 F to 500 F degrees. 1/3 oz. tube.
https://murrays.com/products/dolphin-striker-casting-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-2009.jpg?v=1676950872
PRINDLE DOLPHIN STRIKER CASTING
Dolphin Striker Casting
Murrays Part# 56-2009
Performance Sports factory dolphin striker casting for all Prindle Cats
https://murrays.com/products/dolphin-striker-mast-support-rod-nut-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-F151.jpg?v=1676950872
NACRA DOLPHIN STRIKER ROD NUT
Dolphin Sticker Rod Nut
Murrays Part# 56-F151
9/16" stainless nut for Nacra dolphin striker mast support rod. Used on boats built after 1983. Before threading nut onto rod, use grease or anti-seize on threads of rod to prevent thread galling.
Performance Sports factory item #F151.
https://murrays.com/products/dolphin-striker-mast-support-rod-nacra-old-style
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-C602.jpg?v=1676950873
NACRA DOLPHIN STRIKER ROB-OLD STYLE
NACRA Dolphin Striker Rod - Old Style
This 13" stainless steel mast support rod with 1/2" diameter has 13 threads per inch (TPI). For older Nacras with round crossbars built before 1983. Does not include nuts or washers. Performance Sports factory item #C602. Before assembly, use grease or anti-seize on threads to prevent thread galling. Limited to stock on hand.
https://murrays.com/products/dolphin-striker-casting-small-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-2009C.jpg?v=1676950876
PRINDLE SMALL DOLPHIN STRIKER CASTING
Small Dolphin Striker Casting
Murrays Part# 56-2009C
Small dolphin striker casting for Prindle catamarans
Performance Sports item# 2009C
https://murrays.com/products/dolphin-striker-post-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20140001.jpg?v=1676950876
H-16 DOLPHIN STRIKER POST
H16 Dolphin Striker Post
Murrays Part# 50-20140001
Hobie® factory replacement dolphin striker post fits all Hobie® 16 mast steps (older and newer)
https://murrays.com/products/dolphin-striker-post-h17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50212101.jpg?v=1676950878
H-17 DOLPHIN STRIKER POST
Dolphin Striker Post H17
Murrays Part# 50-50212101
Hobie® factory replacement dolphin striker post for Hobie® 17
Hobie Part# 50212101
https://murrays.com/products/dolphin-striker-post-sleeve
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61140000.jpg?v=1676950878
H-18 DOLPHIN STRIKER POST SLEEVE
Dolphin Striker Post Sleeve
Murrays Part# 50-61140000
Hobie® factory replacement dolphin striker post sleeve for Hobie 18
Hobie Part# 61140000
https://murrays.com/products/dolphin-striker-post-h18-new
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60140001-1.jpg?v=1676950879
H-18 DOLPHIN STRIKER POST
H18 Dolphin Striker Post
Murrays Part# 50-60140001
Replacement dolphin striker post for the Hobie 18 sailboat.
Hobie Part# 60140001
https://murrays.com/products/dolphin-striker-rod-prindle-10-75
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-2004.jpg?v=1739917485
PRINDLE 15, 16, 18 DOLPHIN STRIKER ROD
https://murrays.com/products/dolphin-striker-rod-11-25
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-C105.jpg?v=1676950881
PRINDLE DOLPHIN STRIKER ROD 11.25"
PRINDLE DOLPHIN STRIKER ROD 11.25"*
The Performance Sports factory #C105 11.25" dolphin striker rod is for Prindle 18-2 or 19 standard length. Order #56-C106 if standard is too short. Limited to stock on hand.
https://murrays.com/products/dolphin-striker-rod-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20170001-1.jpg?v=1676950881
H-16 DOLPHIN STRIKER ROD
Dolphin Striker Rod H16
Murrays Part# 50-20170001
Hobie® factory standard replacement dolphin striker rod fits all Hobie®16 dolphin striker posts and corner castings
Hobie Part# 20170001
https://murrays.com/products/dolphin-striker-rod-prindle-12-25
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-C106.jpg?v=1676950882
PRINDLE DOLPHIN STRIKER ROD 12.25"
PRINDLE DOLPHIN STRIKER ROD 12.25"
Nacra Sailing factory dolphin striker rod for Prindle 18-2 and 19. This extra long rod measures 12-1/4" long, as needed for some replacements.
https://murrays.com/products/downhaul-hook-h17-sport
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-52410011.jpg?v=1676950883
H-17 SPORT DOWNHAUL HOOK
H17 Sport Downhaul Hook
Murrays Part# 50-52410011
Discontinued By Hobie - We recommend the Ronstan 8mm S-Hook 21-0049 to replace.
Hobie® factory replacement downhaul hook for Hobie 17 Sport is a special order item..
To replace downhaul line, order 8 feet of 1/4" prestretched line (#39-2312BK).
Hobie Part# 52410011
https://murrays.com/products/dolphin-striker-rod-washer-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-F152.jpg?v=1676950885
NACRA/PRINDLE DOLPHIN STRIKER ROD WASHER
Dolphin Striker Rod Washer
Murrays Part# 56-F152
Washer for Prindle and Nacra dolphin striker rods.
Performance Sports factory item# F152
https://murrays.com/products/dolphin-striker-sleeve-h17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50212201.jpg?v=1676950886
H-17 DOLPHIN STRIKER SLEEVE
Dolphin Striker Sleeve H17
Murrays Part# 50-50212201
Hobie® factory replacement dolphin striker compression sleeve for Hobie® 17
Hobie Part# 50212201
https://murrays.com/products/downhaul-sheave-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40700541.jpg?v=1676950886
H-20 DOWNHAUL SHEAVE
HOBIE 20 DOWNHAUL SHEAVE - 40700541
Hobie factory replacement downhaul sheave for Hobie® 20 mast. UV-stabilized.
SPECS: 1/2" wide by 1 5/32" diameter, 1/4' hole.
https://murrays.com/products/dvd-abducted-by-the-wind
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/drain-plug-with-washer-h20-h1-9
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-91281000.jpg?v=1745532905
H-20/WAVE DRAIN PLUG WITH WASHER
https://murrays.com/products/dvd-big-windy
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/dvd-catamaran-sailing-a-step-by-step-guide
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/45-2043.jpg?v=1738711127
DVD: CATAMARAN SAILING GUIDE
https://murrays.com/products/dvd-four
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/dvd-rick-whites-sailing-seminar-series
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Rick-white.jpg?v=1676950893
DVD: RICK WHITE SAILING SEMINAR SERIES
https://murrays.com/products/dvd-life-etc
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/dvd-progression-beginner-2nd-edition
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/dvd-the-unknown-road
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/dvd-soul-fly
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/dvd-spare-change
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/dvd-the-way-to-fly
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/dvd-wanna-get-high-snow-kite
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/e-clip-gooseneck-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8062521.jpg?v=1676950903
H-16 E-CLIP GOOSENECK
H16 E-Clip Gooseneck
Murrays Part# 50-8062521
Hobie® factory replacement E-clip for gooseneck on Hobie® 16. The E-clip fits old-style boom pin that is grooved.
Hobie Part# 8062521
https://murrays.com/products/end-cap-traveler-track-h17-sport
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50251001.jpg?v=1676950903
H-17 SPORT TRAVELER END CAP TRACK
End Cap Traveler Track H17 Sport
Murrays Part# 50-50251001
-No Longer Available-
Hobie® factory replacement end cap for traveler track on Hobie® 17 Sport
Hobie Part# 50251001
https://murrays.com/products/end-cap-wave-spreader
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38950011_wave_spreader_end_cap.jpg?v=1717440799
WAVE JIB SPREADER END CAP
Hobie Wave Jib Spreader End Cap
Murrays Part# 50-38950011
This is part of the Wave bow spreader kit. These go into the ends of the spreader pole. Replacement end cap for Hobie Wave jib spreader assembly.
Sold individually
Hobie Part# 38950011
https://murrays.com/products/exit-grommet-h20
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/eyelet-post-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-41220001-1.jpg?v=1676950908
H-20 EYELET POST
Eyelet Post H20
Murrays Part# 50-41220001
The Eyelet Post H20 Hobie® factory replacement eyelet post for Hobie® 20 rear crossbar. This item replaces tie button for Inter cats #56-9882.
Fits Hobie Getaway Rear Crossbar
https://murrays.com/products/ez-loc-pintle-lower
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-90880221.jpg?v=1676950909
BRAVO/WAVE/GETAWAY EZ LOC LOWER PINTLE
EZ Lock Lower Pintle
Murrays Part# 50-90880221
Hobie® factory replacement lower pintle for EZ Loc rudder system.
Fits Hobie Bravo, wave and Getaway boats
Hobie Part# 90880221
https://murrays.com/products/eyestrap-wave-bridle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38120011.jpg?v=1714144444
WAVE BRIDLE EYESTRAP
Eyestrap Wave Bridle
Murrays Part# 50-38120011
Hobie® factory replacement eyestrap for Hobie Wave bridle.
https://murrays.com/products/f18-daggerboard-holder-3-4-x-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1040.jpg?v=1676950912
NACRA F18 DAGGERBOARD HOLDER
F18 Daggerboard Holder
Murrays Part# 56-1040
F18 Daggerboard holder for Nacra F18 measures 3/4" x 2".
This is used on the Nacra Infusion Boats, this style has been modified by some on Hobie 20s and other F18 model boats as well. This is similar in style to the Hobie Tiger kit that we have available: SKU: 50-F99501200 if you are looking to add this style of holder to a different boat.
Nacra Sailing factory item# 30014
https://murrays.com/products/ez-loc-pintle-upper
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-90880211.jpg?v=1676950913
BRAVO/WAVE/GETAWAY EZ LOC UPPER PINTLE
EZ Lock Upper Pintle
Murrays Part# 50-90880211
Hobie® factory replacement upper pintle for EZ Loc rudder system.
Fits Hobie Bravo and Getaway boats
Hobie Part# 90880211
https://murrays.com/products/f18-fairlead-kit-high-roller
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9954.jpg?v=1676950915
NACRA F18 FAIRLEAD HIGH ROLLER KIT
Fairlead High Roller Kit
Murrays Part# 56-9954
Mounted on a mainsheet base block, plastic spacers provide a smooth surface to guide the line for the fairlead. Kit includes one pair of spacers with screws and nuts.
https://murrays.com/products/flat-head-machine-screw-5-16-x-5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F105.jpg?v=1718810842
FLAT HEAD MACHINE SCREW 5/16-18 x 5"
Flat Head Machine Screw 5/16 X 5"
Murrays Part# 56-F105
Allen Head Machine Screw 5/16 X 5" Originally this was a flat head screw.
Compare to Performance Sports factory item# F105
https://murrays.com/products/fairlead-thru-deck-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60270000.jpg?v=1676950917
H-18 THRU-DECK FAIRLEAD
H18 Thru-Deck Fairlead
Murrays Part# 50-60270000
Fairlead Thru-Deck H18 for trapeze shock cord for skipper and crew trapeze lines that go through the lip on the outside of the hull.
Center hole on this fairlead is 7/8" diameter and is sleeved with a stainless steel ferrule. Mounting screw holes have a center-to-center measurement of 1-3/8". Hobie® factory replacement part.
Hobie Part# 60270000
https://murrays.com/products/foam-mast-plug-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20060000-1.jpg?v=1676950921
H-16 FOAM MAST PLUG
https://murrays.com/products/forestay-adjuster-with-eye-inter-non-roller-furling
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-30324.jpg?v=1748552276
NACRA FORESTAY ADJUSTER WITH EYE
Nacra Forestay Adjuster with Eye
Murrays Part# 56-30324
https://murrays.com/products/forward-safety-knife
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/47-0700-2.jpg?v=1676950923
FORWARD SAFETY HOOK KNIFE
SAFETY HOOK KNIFE FORWARD
Murrays Part# 47-0700-2
Forward Hook Safety Knife, can be used in conjunction with the Forward Impact Vest.
The Forward impact vest has a special pocket inside the webbing sleeve to store a Forward Hook Safety Knife.
https://murrays.com/products/forward-sailing-snuffer-kit-hoop-sleeve
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/47-8011.jpg?v=1676950929
FORWARD SNUFFER KIT: HOOP & SLEEVE
https://murrays.com/products/forward-wip-horns-transfer
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/47-002.jpg?v=1676950942
FORWARD WIP HORNS TRANSFER 9x16"
Forward WIP Horns Transfer 9x16"
Murrays Part# 47-0024-2
Transfer the Forward WIP Horns sticker onto any sailing surface for the best logo integration possible. No background but the one you provide. This bull has horns and competitors better watch out.
https://murrays.com/products/garb-tie-down-straps
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/32-1512.png?v=1706657389
DAKINE GARB TIE DOWN STRAPS (PR)
Dakine Garb Tie Down Straps
Murrays Part# 32-1512
Garb Tie Downs attach to your rack and stay there. Once you adjust the buckle for the desired loop length, the Garb strap works as a modified bungee cord. Just tighten by pulling the webbing end and its elasticity holds your gear firmly in place. Easy to use, durable and treated for UV protection. Two per set.
https://murrays.com/products/gath-altimeter-bracket-kit-for-sport-hat-retractable-visor
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/gath-altimeter-bracket-kit-52-0070.jpg?v=1716390209
GATH ALTIMETER BRACKET KIT
Gath Altimeter Bracket Kit
Murrays Part# 52-0070
https://murrays.com/products/gath-chin-strap-buckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/52-0006.jpg?v=1676950961
GATH CHIN STRAP BUCKLE
Gath Chin Strap Buckle
Murrays Part# 52-0006C
For 3/4" webbing as used on Gath chin straps. The buckle is sold as a set of male and female.
https://murrays.com/products/gath-convertible-ear-protector
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/EAR-PKT-SET.jpg?v=1676950961
GATH EAR PROTECTOR
Replacement Gath helmet ear protector fits both the Gath Gedi and Gath Surf Convertible helmets.
Gath ear protectors sold individually.
Also called ear cover, earpiece, ear pieces...
https://murrays.com/products/gath-ear-pocket-cover-push
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/52-0062.jpg?v=1721243646
GATH "PUSH" POCKET EAR COVER
Gath Ear Pocket Cover "Push"
Murrays Part# 52-0062
Gath helmet ear pocket pad. Foam peel and stick ear vent cover. Used on all current Gath helmet models. Gath Neo, Gath EVA, Gath Surf Convertible and Gath Gedi helmets.
https://murrays.com/products/gath-full-visor-replacement-retractable
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/RV-REP-VISORS-ALL-COLOURS.jpg?v=1676950968
GATH FULL VISOR REPLACEMENT - GREY
Gath Full Visor Replacement
Murrays Part# 52-0003-9
Replacement visor for a Gath retractable visor helmet.
Fits both the small and the medium sizes.
Size: Small
Color: Grey
https://murrays.com/products/getaway-batten-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/37016001.jpg?v=1734542731
GETAWAY BATTEN SET OEM
Getaway Batten Set
Murrays Part# 50-37016001
Hobie® factory replacement batten set for the Hobie Getaway.
Hobie Part# 37016001
https://murrays.com/products/getaway-mast-head-sheave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37611000.jpg?v=1676950978
GETAWAY MASTHEAD SHEAVE
GETAWAY MAST HEAD SHEAVE
Replacement Hobie Getaway mast head sheave.
Hobie part number 37611001
https://murrays.com/products/getaway-spreader-pole-end-cap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37500031.jpg?v=1676950981
GETAWAY SPREADER POLE END CAP
Getaway Spreader Pole End Cap
Murrays Part# 50-37500031
Hobie® factory replacement end cap for Getaway spreader pole
Hobie Part# 37500031
https://murrays.com/products/gooseneck-assembly-h14-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/10770001_3_z29.jpg?v=1725652511
H-14/16 GOOSENECK ASSEMBLY
HOBIE 14/16 GOOSENECK ASSEMBLY
Murrays PN 50-10770001
Hobie factory replacement gooseneck assembly for Hobie 14 or 16. Hobie Cat item #10770001.
https://murrays.com/products/go-joe-2-0-board-float
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/oceanrodeo-go-joe-kiteboard_float.png?v=1775668049
GO-JOE 2.0 BOARD FLOAT
Go-Joe 2.0 kiteboard Float
https://murrays.com/products/gooseneck-bolt-prindle-n5-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F131.jpg?v=1723828880
PRINDLE/NACRA GOOSENECK BOLT
Gooseneck Bolt
Murrays Part# 56-F131
3/8" x 1-1/2" gooseneck bolt for Nacra 5.2 and all Prindles.
Performance Sports factory item # F131
https://murrays.com/products/gooseneck-boom-pin-h14-h16-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10772010-1.jpg?v=1676950990
H-14/16/18 GOOSENECK BOOM PIN
H14/16/18 Gooseneck Boom Pin
Murrays Part# 50-10772010
Hobie® factory gooseneck boom pin for Hobie® 14, 16 or 18.
https://murrays.com/products/gooseneck-shackle-h14-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10772020-1_e63c34ad-3bfd-4e0c-b17d-438dcb030d3e.jpg?v=1676950993
H-14/16 GOOSENECK SHACKLE
H14/16 Gooseneck Shackle
Murrays Part# 50-10772020
Hobie factory replacement gooseneck shackle for Hobie 14 and Hobie 16.
Uses a 3/16 x 7/8" clevis pin to connect to the main sail tack.
Quick release upgrade option is the 3/16 x 3/4" Quick Release Pin, part #18-3M075L
Some newer boats and racers replace the downhaul ring with a second Gooseneck Shackle.
https://murrays.com/products/gooseneck-u-bracket-n5-2-prindles
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-7810.jpg?v=1676950994
PRINDLE/NACRA GOOSENECK 'U' BRACKET
GOOSENECK 'U' BRACKET
Murrays Part# 56-7810
Prindle Gooseneck 'U' Bracket
Gooseneck "U" bracket fits Nacra 5.2 and all Prindles.
Nacra Sailing factory item# 30980
https://murrays.com/products/gooseneck-vertex-hobie-all
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50772031_2_z5.jpg?v=1725653398
HOBIE GOOSENECK HINGE VERTEX
Hobie Gooseneck Hinge Vertex
Murrays Part# 50-50772031
Hobie® factory replacement gooseneck vertex for all Hobie® Cats.
Hobie Part# 50772031
https://murrays.com/products/gooseneck-yoke-h18-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60710000.jpg?v=1676950998
H-18/20 GOOSENECK YOKE
H18/20 Gooseneck Yoke
Murrays Part# 50-60710000
Hobie® factory replacement gooseneck yoke for Hobie 18 and 20.
Hobie Part# 60710000
https://murrays.com/products/gudgeon-die-casting-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50102011.jpg?v=1676951003
H-16 GUDGEON CASTING
H16 Gudgeon Casting
Murrays Part# 50-50102011
Standard on current production Hobie 16s, these die cast aluminum gudgeons are now available for your Hobie 16. Their one piece construction and plastic bushed pin holes guarantee pin hole alignment, reducing rudder pin wear, slop and drag.
Die cast aluminum construction
Standard on all Hobie 16 catamarans
Uses 8x #8030402 screw for installation (sold separately)
https://murrays.com/products/gudgeon-narrow-n5-0-n5-7-n6-0-p18-2-p19
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1011.jpg?v=1676951007
PRINDLE/NACRA NARROW GUDGEON
Narrow Gudgeon
Murrays Part# 56-1011
Narrow gudgeon fits Nacra 5.0, 5.7, 6.0 and Prindle 18-2 and 19
Nacra Sailing factory item# 300007
https://murrays.com/products/gudgeon-extended-p18-2-p19
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1008.jpg?v=1676951009
PRINDLE EXTENDED GUDGEON
https://murrays.com/products/gudgeon-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-40101301.jpg?v=1737759198
H-20 GUDGEON
H20 Gudgeon
Murrays Part# 50-40101301
Hobie 20 replacement gudgeon for the Hobie® 20. Use #12-24 x 1" PPHMS-P screws and 12-24 nylock hex nuts.
Hobie Part# 40101301
https://murrays.com/products/gudgeon-screw-tiger-2008
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-F99226001.jpg?v=1676951011
TIGER GUDGEON SCREW 2008
https://murrays.com/products/gudgeon-wide-n5-2-n5-5-n5-8-18sq
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1010.jpg?v=1676951011
NACRA WIDE GUDGEON
N5.2/5.5/5.8 Wide Gudgeon
Murrays Part# 56-1010
Wide gudgeon fits Nacra 5.2, 5.5, 5.8 and 18-square
Nacra Sailing factory item# 30006
https://murrays.com/products/h14-black-mesh-trampoline
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10970055-H15-black-mesh-tramp.jpg?v=1676951015
H-14 BLACK MESH TRAMPOLINE
H14 Black Mesh Trampoline
Murrays Part# 50-10970055
The H14 black mesh trampoline is a trampoline for a Hobie 14. It is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Order lacing separately.
Hobie Part# 10970055
https://murrays.com/products/h14-main-fiberglass-6-batten-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/hobie-14-main-batten-set-300x274.jpg?v=1734543526
H-14 MAIN BATTEN SET
H14 Main Batten Set
Murrays Part# 46-3011
Hobie factory saturn shaped fiberglass battens for a Hobie 14 main sail. They are cut to length and can be shortened as necessary for your sail. This is how Hobie makes their sets! Batten caps are included.
https://murrays.com/products/h14-rear-crossbar-without-castings
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10191910.jpg?v=1676951022
H-14 REAR CROSSBAR
H14 Rear Crossbar without Castings
Murrays Part# 50-10191910
Hobie® factory replacement rear crossbar only for Hobie® 14
https://murrays.com/products/h16-forward-crossbar-94-with-integrated-track
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-25131910.jpg?v=1676951026
H-16 FROWARD CROSSBAR WITH MAST STEP
H16 Forward Crossbar with Mast Step
Murrays Part# 50-25131910
This is the current production front Crossbar for a Hobie 16. It includes the integrated traveler track and the updated mast step. Hobie® factory replacement forward crossbar for 1994 or later Hobie 16's with integrated track.
Hobie Part# 25131910
https://murrays.com/products/h16-jib-car-slide-only-with-wheels
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-25243003-1.jpg?v=1676951029
H-16 JIB CAR SLIDE ONLY WITH WHEELS
H16 Jib Car Slide Only with Wheels Hobie factory jib car slide for Hobie 16 with integrated jib track (standard equipment since late 2005). Hobie part number 25243003
https://murrays.com/products/h16-jib-fiberglass-batten-67
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/46-3030-1_H-16_JIB_BATTEN_67_Murrays_jib_batten_with_a_trentec_batten_cap._nbsp_nbsp_Batten_1_in_a_Hobie_jib_batten_set_20400001.jpg?v=1734561806
H-16 JIB FIBERGLASS BATTEN 67"
H-16 JIB BATTEN 67"
67" Murrays jib batten with a trentec batten cap.
Batten #1 in a Hobie 16 jib batten set - 20400001
https://murrays.com/products/h16-main-fiberglass-batten-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/hobie-16-main-batten-set.jpg?v=1736880473
H-16 MAIN FIBERGLASS BATTEN SET
H16 Main Fiberglass Batten Set
Murrays Part# 46-3020
Saturn shaped fiberglass Hobie factory main sail batten set. This set includes all eight battens with both luff and leech caps for Hobie 16 main sail.
Hobie Part# 21000001
https://murrays.com/products/h16-jib-fiberglass-batten-43-3-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie_16_jib_batten.jpg?v=1734560782
H-16 JIB FIBERGLASS BATTEN 44"
H-16 JIB BATTEN 44"
44" Murrays jib batten with a trentec batten cap.
Batten #3 in a Hobie jib batten set - 20400001
It is also use for the batten #8 on a Hobie 16 main sail batten set - 21000001
https://murrays.com/products/h16-turquoise-jib-sail-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20992071-1.jpg?v=1676951036
H-16 JIB SAIL (TURQUOISE)
H16 Jib Sail (Turquoise)
Murrays Part# 50-20992071
Turquoise jib for the Hobie 16. Made by Hobie Cat and works on any Hobie 16 sailboat.
https://murrays.com/products/h18-black-aft-crossbar-extrusion
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60191211.jpg?v=1676951040
H-18 AFT CROSSBAR EXTRUSION-BLACK
H18 Aft Crossbar Extrusion-Black
Murrays Part# 50-60191211
Hobie® factory replacement H18 Black Aft Crossbar Extrusion.
https://murrays.com/products/h18-class-insignia-decal
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-62330000.jpg?v=1676951106
H-18 CLASS SAIL INSIGNIA
https://murrays.com/products/h18-main-fiberglass-batten-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie-batten.jpg?v=1676951044
H-18 MAIN FIBERGLASS BATTEN SET
H18 Main Fiberglass Batten Set
Murrays Part# 46-3050
Fiberglass battens are stronger and less expensive than foam battens, but also heavier. This batten set for Hobie® 18 main does not include leech caps.
https://murrays.com/products/h18-trampoline-mesh-set-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60970055-h18-black-mesh-trampoline.jpg?v=1676951046
H-18 MESH TRAMPOLINE-BLACK
H18 Mesh Trampoline-Black
Murrays Part# 50-60970055
The gold standard for Hobie 18 trampolines, this black mesh trampoline features a heavy duty fabric, pockets, and reinforced grommets.
Hobie Part# 60970055
https://murrays.com/products/h21sc-h20-shroud-tang
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-30690001.jpg?v=1676951048
H-20/21/SC SHROUD TANG
H20/21/ Super Cruiser Shroud Tang
Murrays Part# 50-30690001
https://murrays.com/products/halyard-lock-h18-comptip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61610101.jpg?v=1676951051
H-18 HALYARD HOOK (COMPTIP)
H18 Halyard Lock (Comptip)
Murrays Part# 50-61610101
Halyard hook for Hobie 18 comptip mast assembly.
Hobie Part# 61610101
https://murrays.com/products/hand-rivet-tool-heavy-duty
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/33-7903-2.jpg?v=1706658444
HEAVY DUTY HAND RIVET TOOL
https://murrays.com/products/harken-block-10-1-mainsheet-carbo-boom
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9955.jpg?v=1676951057
HARKEN 57MM 5-SHEAVE BLOCK-SWIVEL
Harken 57mm 5-Sheave Block-Swivel
Murrays Part# 56-9955
Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
Harken Part# 2762
https://murrays.com/products/harken-block-10-1-mainsheet-carbo-air-base
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9953.jpg?v=1676951064
HARKEN 10:1 MAINSHEET CARBO AIR BASE BLOCK
Harken 10:1 Mainsheet Carbo Air Base Block
Murrays Part# 56-9953
This Carbo AirBlock® has an enormous working range, with a higher working load than a standard block, even though it is lighter in weight. The Carbo Ratchet block allows sailors to hand-hold loaded lines and offers balance between holding power and controlled easing. The base block has an on-off ratchet and will roll freely in both directions when disengaged, such as in light air.
https://murrays.com/products/harken-block-12-1-mainsheet-carbo-boom
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9966.jpg?v=1676951072
HARKEN 12:1 MAINSHEET CARBO BOOM BLOCK
Harken 12:1 Mainsheet Carbo Boom Block
Murrays Part# 56-9966
Harken 57mm triple fiddle block with swivel used for 12:1 mainsheet systems on beach cats.
Low-friction Carbo AirBlocks® are lightweight, strong, reliable and affordable. These small, compact blocks have very high working loads for safe, easy trimming.
Specifications:
Sheave Diameter: 2-1/4"
Length: 6"
Maximum Line Diameter: 7/16"
Maximum Working Load: 2380 lb.
Breaking Strength: 5000 lb.
Weight: 11.15 oz.
Harken Part# HSB379
https://murrays.com/products/hex-bolt-5-16-x-4-25
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F104.jpg?v=1718810004
PRINDLE/ESCAPE/NACRA HEX BOLT 5/16 X 4.25"
Hex Bolt5/16 X 4.25"
Murrays Part# 56-F104
Hexcap bolt measures 5/16 x 4-1/4" and is used on the front crossbar (outboard) of Prindle 15/16/Escape and older Nacras. Performance Sports factory item #F104.
https://murrays.com/products/harken-block-12-1-mainsheet-carbo-ratchamatic-base
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9964.jpg?v=1676951076
HARKEN 12:1 MAINSHEET CARBO RATCHAMATIC BASE
Harken 12:1 Mainsheet Carbo Ratchamatic Base
Harken 57 mm triple fiddle with reinforced cam arms that is used for 12:1 mainsheet systems on beach cats.
Low-friction Carbo AirBlocks® are lightweight, strong, reliable and affordable. Companions to the popular Harken® Black Magic® line, these small, compact blocks have very high working loads for safe, easy trimming.
https://murrays.com/products/hex-bolt-rear-crossbar-5-16-x-5-75
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F141.jpg?v=1718811274
PRINDLE REAR HEX BOLT 5/16 X 5.75" OUTBOARD BOLT
Rear Hex Bolt 5/16 X 5.75" Outboard Bolt
Murrays Part# 56-F141
5/16" x 5-3/4" hex cap bolt is for Prindle rear crossbar.
Performance Sports Factory item# F141
https://murrays.com/products/hinge-kit-gath-peak-full-visor-shield
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/52-0390.jpg?v=1731713806
GATH HINGE KIT: PEAK VISOR
The Gath helmet hinge kit: peak visor contains all the hardware for installing a peak visor to your Gath Gedi or Surf Convertible helmet.
https://murrays.com/products/hiking-strap-webbing-2-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-3520-1.jpg?v=1676951082
HIKING STRAP WEBBING 2" BLACK
https://murrays.com/products/hinge-kit-half-visor-gath-gedi
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/52-0400.jpg?v=1731700476
GATH HING KIT: HALF VISOR AND FACE SHEILD
Gath Hing Kit: Half Visor and Face Shield
https://murrays.com/products/hobie-14-front-crossbar-without-corner-castings
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/101319101z185.jpg?v=1676951084
H-14 FRONT CROSSBAR
H14 Front Crossbar
Murrays Part# 50-10131910
Hobie 14 Front Crossbar without casting
https://murrays.com/products/hobie-14-16-mast-step-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/20200011.jpg?v=1676951084
H-14/16 MAST STEP-BLACK
H14/16 Mast Step-Black
Murrays Part# 50-20200011
This is a factory Hobie 14*/16 Mast Step Black replacement. For Hobie 14s and Hobie 16s. This is the post 2004 version.
The first hardware change was in the early 80s. The mast step was angled further back and the mast base was adjusted to match. If you are replacing an original pre-1980 mast step you will need new rigging to accommodate the increased mast rake.
https://murrays.com/products/hobie-16-dyneema-trapeze-lines-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0264.jpg?v=1676951086
H-16 DYNEEMA TRAPEZE LINES
H16 Dyneema Trapeze Lines
Murrays Part# 002-0264
Hobie has approved Dyneema trap lines for class racing as of 2016.
https://murrays.com/products/hobie-16-jib-halyard-tension-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/murrays.com-jib-halyard-tension-kit-01-3301.jpg?v=1676951089
H-16 JIB HALYARD TENSION KIT
The Murrays Hobie 16 Jib Halyard Tension Kit allows sailors to quickly and easily adjust their jib halyard tension while under way. This allows sailors to adjust their mask rake and rig tension to suit the conditions.
https://murrays.com/products/hobie-16-mast-base-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/20640011-1.jpg?v=1676951089
H-16 MAST BASE
H16 Mast Base
Murrays Part# 50-20640011
The Hobie 16 Mast Base is the part that fits in the bottom of the mast and is attached to the mast with rivets. Works with all Hobie 16 sailboats.
Attaches to bottom of Hobie 16 mast
Use three (3) Part # 8010131 rivets to secure fitting
Hobie Cat Part# 20640011
https://murrays.com/products/hobie-16-turquoise-mesh-trampoline-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/20970058-turquiose-mesh-tramp.jpg?v=1676951092
H-16 MESH TRAMPOLINE-TURQUOISE
H16 Mesh Trampoline- Turquoise
Murrays Part# 50-20970058
Mesh trampoline for the Hobie 16 with a double grommeted center section. Reinforced in high load areas, has super duty grommets and comes complete with line pockets and built in hiking straps. Note that this trampoline requires a longer lacing line than older models. Includes aft lacing strip. Lacing line is sold separately. Heat-welding lasts longer in the sun than trampolines that are stitched at the seams. Mesh allows wind and water t
https://murrays.com/products/hobie-16-seabreeze-jib-sail-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-20992088-1-300x300.jpg?v=1740413592
H-16 JIB SAIL (SEABREEZE)
H16 Jib Sail (Seabreeze)
Murrays Part# 50-20992088
Hobie Cat factory Seabreeze jib sail for Hobie 16. Colors may vary slightly from image.
https://murrays.com/products/hobie-16-white-vinyl-trampoline-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/20970000-white-vynal-tramp.jpg?v=1676951095
H-16 VINYL TRAMPOLINE-WHITE
H16 Vinyl Trampoline-White
Murrays Part# 50-20970000
Hobie 16 White Vinyl Trampoline is less expensive than mesh and offers spray protection, so you stay warmer on cool, choppy days.
Hobie Cat makes vinyl tramps only in white; colors are available only in mesh. Class legal for Hobie racing.
https://murrays.com/products/hobie-17-aft-crossbar-extrusion
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50261001.jpg?v=1676951099
H-17 AFT CROSSBAR EXTRUSION
H17 Aft Crossbar Extrusion
Murrays Part# 50-50261001
Hobie® factory replacement aft crossbar extrusion for Hobie 17.
https://murrays.com/products/hobie-17-comptip-assembly
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50611101.jpg?v=1676951101
H-17 COMP-TIP ASSEBLY
H17 Comptip Assembly
Murrays Part# 50-50611101
Hobie® factory replacement CompTip assembly for Hobie 17
https://murrays.com/products/hobie-18-boom-assembly-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/H18-boom-assembly.jpg?v=1676951105
H-18 BOOM ASSEMBLY-BLACK
H18 Boom Assembly-Black
Murrays Part# 50-60720011
Hobie® factory replacement part: The black Hobie 18 boom assembly includes all integrated accessories pictured. Main sheet block hangers, out haul cleat, outhaul traveler, mast rotation cleat, endcaps and gooseneck pin.
Hobie Part#60720011
https://murrays.com/products/hobie-18-crossbar-casting-rear-right-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60200011.jpg?v=1676951107
H-18 CROSSBAR CASTING RIGHT REAR-BLACK
H18 Crossbar Casting Right Rear-Black
Murrays Part# 50-60200011
Hobie® factory replacement right rear crossbar casting for Hobie® 18
https://murrays.com/products/hobie-17-sport-spreader-pole-extension
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50511011.jpg?v=1676951109
H-17 SPORT SPREADER POLE Extrusion
H17 Sport Spreader Pole Extender
Murrays Part# 50-50511011
Hobie factory spreader pole extension for the Hobie 17 Sport
https://murrays.com/products/hobie-18-comptip-assembly
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60611100.jpg?v=1676951109
H-18 COMPTIP ASSEMBLY
H18 Comptip Assembly
Murrays Part# 50-60611100
Hobie® factory Hobie 18 CompTip Assembly for Hobie 18 mast. A CompTip is the upper section of Hobie mast built in or after 1968. Fiberglass and non-conductive, it is designed to prevent electrocution by contact with a high power line.
https://murrays.com/products/hobie-18-crossbar-casting-rear-left-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60210011.jpg?v=1676951110
H-18 CROSSBAR CASTING REAR LEFT-BLACK
H18 Crossbar Casting Rear Left Black
Murrays Part# 50-60210011
Hobie® factory replacement left rear crossbar casting for Hobie® 18
https://murrays.com/products/hobie-18-front-crossbar-inboard-support-casting-discontinued
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61010001.jpg?v=1676951112
H-18 FRONT CROSSBAR INBOARD SUPPORT CASTING KIT
https://murrays.com/products/hobie-18-diamond-wire-assembly
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hboie-18-Diamond-wire.jpg?v=1676951112
H-18 DIAMOND WIRE COMPLETE
H18 Diamond Wire Complete
Murrays Part# 50-61750001
Replacement Hobie 18 diamond wire assembly, including the turnbuckle, diamond wire roller and end fittings.
https://murrays.com/products/hobie-18-dolphin-striker-rod
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Dolphin-striker-rod_088caf50-b9d0-4c90-bc90-63ccb1d817d0.jpg?v=1676951113
H-18 DOLPHIN STRIKER ROD
H18 Dolphin Striker Rod
Murrays Part# 50-61170001
Hobie® factory replacement dolphin striker rod for Hobie 18.
https://murrays.com/products/hobie-18-jib-with-window-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/H18-Jib.jpg?v=1676951116
Hobie 18 JIB SAIL WITH WINDOW (WHITE) OEM
H18 Jib Sail With Window (White)
Murrays Part# 50-60992011
Hobie factory replacement sail is Hobie class legal for racing.
The only current production color is white, but custom color jibs are available for special order. Hobie will typically have access to any color that is currently being used on their production boat sails. Contact for current color availability and lead time.
https://murrays.com/products/hobie-18-sx-line-package
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Murrays_Hobie_18SX_line_package_contains_all_the_lines_on_a_Hobie_18SX..jpg?v=1732294931
H-18SX LINE PACKAGE
Murrays Hobie 18SX line package contains all the lines on a Hobie 18SX. The pack utilizes Robline Neptune 500 for the main and jib sheets and Pelican VLS, Very Low Stretch, for the control lines. The Hobie 18 SX has wings that extend fore and aft of the front and rear crossbars and a taller mast, 29'7".
Main Sheet
Jib Sheet
Daggerboard Handles
Outhaul
Downhaul
Mast Rotation
Main Halyard
Trampoline Lacing Lines
Trapeze Adjustment Line
Batten Ties
Roller Furline line
Jib Halyard
Jib L
https://murrays.com/products/hobie-18-main-traveler-roller-skid
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61810000.jpg?v=1676951118
H-18 TRAVELER ROLLER SKID
H18 Traveler Roller Skid
Murrays Part# 50-61810000
Hobie® factory replacement roller skid for Hobie® 18 main traveler.
https://murrays.com/products/hobie-18-main-traveler-ball-bearing-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61850002.jpg?v=1676951120
H-18 MAIN TRAVELER BALL BEARING SET
H18 Main Traveler Ball Bearing Set
Murrays Part# 50-61850002'
Hobie 18 Main Traveler Ball Bearing Set includes two traveler ball bearings (#50-61850000), plus one 2" cotter pin (#50-8060121).
https://murrays.com/products/hobie-18-20-comp-tip-mast-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/HC-60602041.jpg?v=1676951122
H-18/20 COMPTIP MAST HEAD
H18/20 Comptip Mast Head
Murrays Part# 50-60602041
Hobie 18/20 Comp Tip Mast Head factory replacement mast head for Hobie® 18 or 20 with Comp Tip.
https://murrays.com/products/hobie-20-comptip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40401210.jpg?v=1676951124
H-20 COMPTIP
H20 Comtip
Murrays Part# 50-40401210
Hobie® factory replacement Hobie 20 CompTip. A CompTip is the upper section of Hobie mast built in or after 1968. Fiberglass and non-conductive, it is designed to prevent electrocution by contact with a high power line.
https://murrays.com/products/hobie-20-forward-crossbar-extrusion
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40131031.jpg?v=1676951126
H-20 FORWARD CROSSBAR EXTRUSION
H20 Forward Crossbar Extrusion
50-40131031
Hobie® factory replacement forward crossbar extrusion for Hobie® 20.
https://murrays.com/products/hobie-20-hiking-straps
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40970001-Hiking-Strap-Set.jpg?v=1676951128
H-20 HIKING STRAPS
HIKING STRAP W/ RIVET PLATES
Murray Part# 50-40970001
Hobie® factory hiking strap set for Hobie® 20 includes rivets and plates
https://murrays.com/products/hobie-20-main-sail-batten-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-42000001-H20-batten-set.jpg?v=1676951130
H-20 MAIN SAIL BATTEN SET
H20 Main Sail Batten Set
Murrays Part# 50-42000001
Hobie® factory replacement batten set for the Hobie 20
Stock batten lengths:
#8 (top) 31"
#7 47"
#6 60"
#5 76"
#4 87"
#3 93.5"
#2 97"
#1 (bottom) 96"
https://murrays.com/products/hobie-20-jib-hinge-cover-plate
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/41162001-hinge-cover-plate.jpg?v=1676951132
H-20 JIB HINGE COVER PLATE
H20 Jib Hinge Cover Plate
Murrays Part# 50-41162001
Hobie® factory replacement hinge cover plate for Hobie 20 jib.
https://murrays.com/products/hobie-bravo-ez-loc-tiller-extension
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-90550011.jpg?v=1676951134
BRAVO TILLER EXT EZ LOC
https://murrays.com/products/hobie-getaway-6oz-jib-sail
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-6030-1_Hyde_Hobie_18_white_jib_200x200_06a37cdf-4d13-49e4-b1e6-6bcf92f1522f.jpg?v=1740501776
GETAWAY JIB SAIL (WHITE)
H14 Roller Furling Jib Sail (White)
Murrays Part# 30-5012
A roller furling jib adds safety, convenience and performance to your Hobie 14. Reduce sail area while sailing or furl your jib while beached. Dacron sailcloth in your choice of weight and solid colors; 4-oz. cloth offers a greater selection of colors than 6-oz. Viewing window is not included (order #30-5001). Order hardware kit #30-5015 separately.
https://murrays.com/products/hobie-daggerboard-cover-tiger-fox-fx-one
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-72410001.jpg?v=1676951139
HOBIE TIGER/FOX/FX DAGGERBOARD COVER
Hobie Tiger Daggerboard Cover
Murrays Part# 50-72410001
Protect those daggerboards! This two pocket, woven polyethylene lined cover is padded and has a tough, Cardura (600 denier) outer material. It has carrying handles and Velcro closures. Very important for preventing dings, gouges, and scrapes while storing and trailering.
https://murrays.com/products/hobie-getaway-aft-crossbar-end-cap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37201021.jpg?v=1676951140
GETAWAY AFT CROSSBAR END CAP
Getaway Aft Crossbar End Cap
Murrays Part# 50-37201021
Hobie® factory replacement rear crossbar casting end cap for Hobie® Getaway.
https://murrays.com/products/hobie-getaway-comptip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37611100.jpg?v=1676951141
HOBIE GETAWAY COMPTIP
Getaway Comptip
Murrays Part# 50-37611100
Hobie Getaway CompTip factory replacement CompTip for Getaway is a special order item. A CompTip is the upper section of a Hobie mast built in and after 1986. Fiberglass and non-conductive, it was designed to prevent electrocution by contact with a high power line.
https://murrays.com/products/hobie-main-batten-luff-protector-kit-5hole
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/12480001_1_z204.jpg?v=1725648812
HOBIE POCKET PROTECTOR KIT
https://murrays.com/products/hobie-getaway-ez-loc-tiller-crossbar
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37524001.jpg?v=1676951144
GETAWAY EZ LOC TILLER CROSSBAR
Getaway EZ Loc Tiller Crossbar
Murrays Part# 50-37524001
Newest 4th edition Hobie Getaway crossbar.
https://murrays.com/products/hobie-roller-furler-drum-assembly
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61900000.jpg?v=1676951145
HOBIE ROLLER FURLER DRUM ASSEMBLY
https://murrays.com/products/hobie-rudder-blade-hobie-epo-3
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/20490030.jpg?v=1676951147
HOBIE EPO3 RUDDER BLADE
https://murrays.com/products/hobie-roller-furler-sleeve-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61950001.jpg?v=1676951148
HOBIE ROLLER FURLER SLEEVE (SS)
Hobie Stainless Steel Roller Furler Sleeve
Murrays Part# 50-61950001
Hobie Roller Furler Sleeve is a Hobie factory replacement stainless steel roller furler sleeve.
Hobie Part# 61950001
https://murrays.com/products/hobie-rudder-blade-white-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie-Nylon-Rudder-Blade.jpg?v=1676951149
HOBIE RUDDER BLADE - WHITE NYLON
Hobie Rudder Blade - White Nylon
Murrays Part# 50-20493000
The Hobie Rudder Blade - White Nylon is a solid molded white nylon rudder blade for use on virtually all Hobie Catamarans. Hobie factory nylon rudder blades are stock on Hobie 14, 16, 17, 18, 20 and Waves with pre-EZ Loc rudder systems. Hobie rudders are sold undrilled and we recommend that you use your old rudder as a template to drill your new rudder.
Hobie Part# 20493000
https://murrays.com/products/hobie-sail-feeder-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-80100501.jpg?v=1676951151
HOBIE SAIL FEEDER KIT
Hobie Sail Feeder Kit
Murrays Part# 50-80100501
Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie®'s Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
https://murrays.com/products/hobie-tiger-daggerboard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-F18050905.jpg?v=1676951152
TIGER DAGGERBOARD
Tiger Daggerboard
Murrays Part# 50-F18050905
Hobie® factory daggerboard for Hobie Tiger.
https://murrays.com/products/hobie-shroud-anchor-bar
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50101701.jpg?v=1676951153
HOBIE SHROUD ANCHOR BAR
Hobie Shroud Anchor Bar
Murrays Part# 50-50101701
This is the bar that the shroud anchor pins screws into to secure the shrouds on. Shroud anchor bar for Hobie Cat masts (replaces the nut used on older models). Use with the anchor pin to secure under the lip of the hull.
Stainless steel
Length: 3.5 inches
Application: Hobie 14/16/17/18 sailboats
Compare to Hobie Part# 50101701
https://murrays.com/products/hobie-screw-10-32-x-1-2-fhms
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8030071-screw.jpg?v=1676951155
FIBER TENDON SCREW
https://murrays.com/products/hobie-tiger-black-mesh-trampoline
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-F18025840.jpg?v=1676951157
TIGER MESH TRAMPOLINE-BLACK
Tiger Mesh Trampoline-Black
Murrays Part# 50-F18025840
Hobie® factory replacement trampoline for Tiger.
https://murrays.com/products/hobie-tiger-lower-rudder-gudgeon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-F18056012.jpg?v=1676951157
TIGER LOWER RUDDER GUDGEON
Hobie Tiger Lower Rudder Gudgeon
Murrays Part# 50-F18056012
Hobie® factory replacement lower rudder gudgeon for Tiger.
https://murrays.com/products/hobie-tiller-tendon-kit-getaway-wave-updated
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37561011-1.jpg?v=1676951158
HOBIE TENDON KIT (PRE EZ LOC)
Hobie Tendon Kit (Pre EZ Loc)
Murrays Part# 50-37561011
This tendon kit is the replacement for tendons used on the Hobie Wave, Hobie Getaway, and Hobie Bravo with the first generation EZ Loc rudders. This upgraded version is a notable improvement over the original tendons.
Hobie Part# 37561011
https://murrays.com/products/hobie-tiger-upper-gudgeon-2007
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-F18056014.jpg?v=1676951159
TIGER UPPER GUDGEON 2007+
Tiger Upper Gudgeon 2007+
Murrays Part# 50-F18056014
The Hobie Tiger Upper Gudgeon 2007+ is factory replacement upper rudder gudgeon for a Hobie Tiger from 2007 to now.
https://murrays.com/products/hobie-wave-jib-orange
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38992010__26997.jpg?v=1740176348
WAVE JIB SAIL (WHITE)
Wave Jib Sail (White)
Murrays Part# 50-38992010
White jib for the Hobie Wave catamaran.
White 6 oz heavy duty Dacron sailcloth
25 square foot sail area
https://murrays.com/products/hobie-wave-jib-sail-5oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-6030-1_Hyde_Hobie_18_white_jib_200x200_06a37cdf-4d13-49e4-b1e6-6bcf92f1522f.jpg?v=1740501776
WAVE JIB SAIL (WHITE)
H14 Roller Furling Jib Sail (White)
Murrays Part# 30-5012
A roller furling jib adds safety, convenience and performance to your Hobie 14. Reduce sail area while sailing or furl your jib while beached. Dacron sailcloth in your choice of weight and solid colors; 4-oz. cloth offers a greater selection of colors than 6-oz. Viewing window is not included (order #30-5001). Order hardware kit #30-5015 separately.
https://murrays.com/products/hobie-wave-main-traveler-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-39250000-1.jpg?v=1676951166
WAVE CLUB TRAVELER KIT
Wave Club Traveler Kit
Murrays Part# 50-39250000
The Hobie Wave Main Traveler Kit is the Hobie factory main traveler kit for Club Wave includes track, Ronstan cleat, traveler car, mounting plate and rivets.
https://murrays.com/products/hobie-wave-ez-loc-rudder-assembly
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39312000_2_z187.jpg?v=1726094991
WAVE EZ LOC RUDDER ASSEMBLY
Hobie Wave EZ Loc Rudder Assembly
Murrays Part# 50-39312000
EZ Loc rudder assembly for the Hobie Wave.
Hobie Part# 39312000
https://murrays.com/products/hobie-wave-jib-spreader-pole-hardware-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-38999001.jpg?v=1676951167
WAVE JIB SPREADER POLE AND HARDWARE KIT
Wave Jib Spreader Pole and Hardware Kit
Murrays Part # 50-38999001
Hobie Cat®'s Wave jib kit enables you to take your Wave sailing to a higher level. More sail area means more speed and performance! The Wave jib accelerates learning and encourages crew participation while sailing. The jib hardware kit comes complete with bow spreader pole and all the nuts, bolts, and blocks required. Order Jib separately.
https://murrays.com/products/hobie-wave-main-sail
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-0403_H18_hyde_main_sail_-_White.jpg?v=1745604921
WAVE MAINSAIL (WHITE)
Getaway Mainsail (White)
Murrays Part# 30-6005
https://murrays.com/products/hp-2-hand-riveter-3-32-3-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/33-39000.png?v=1676951170
HP-2 HAND RIVETER 3/32-3/16
https://murrays.com/products/hp-2-hand-riveter-repair-jaws
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/33-39123-1-300x300.jpg?v=1742507905
HP-2 HAND RIVETER REPAIR JAWS
https://murrays.com/products/hull-seal-wave-under-seat-pad
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38370001_7_z165.jpg?v=1725924276
WAVE HULL SEAL CAP
Hobie Wave Hull Seal Cap
Murrays Part# 50-38370001
Hobie® factory replacement hull seal for under the seat pad on Wave.
Hobie Part# 38370001
https://murrays.com/products/hullkote-speed-polish-16-oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-0420-1.jpg?v=1676951182
MCLUBE HULLKOTE SPEED POLISH 16OZ
McLube HullKote Speed Polish 16oz
Murrays Part# 40-0420
HullKote combines the same very fast world renowned McLube proprietary formulation of the bonded PTFE suspension system with an entirely revolutionary, citrus-based, long-lasting, high gloss polish. The results have been remarkable.
https://murrays.com/products/illustrated-parts-list-nacra-new
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-0400.jpg?v=1676951184
NACRA ILLUSTRATED PARTS LIST
https://murrays.com/products/illustrated-parts-list-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-87167020.jpg?v=1676951188
H-20 ILLUSTRATED PARTS LIST
H20 Illustrated Parts List
Murrays Part# 50-87167020
Hobie® factory publication aids in identifying parts for the Hobie 20. Find the item number for the part you need and easily search the Murrays store.
The parts list is also available for free download at the Hobie Cat Web site.
https://murrays.com/products/illustrated-parts-list-h14-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-87162810.jpg?v=1676951188
H-14/16 ILLUSTRATED PARTS LIST
H14/16 Illustrated Parts List
Murrays Part# 50-87162810
Hobie® factory publication aids in identifying parts for the Hobie® 14 and 16. Find the item number for the part you need and easily search the Murrays store.
The parts list is also available for free download at the Hobie Cat® Web site.
https://murrays.com/products/illustrated-parts-list-h17-h17s
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-87173000.jpg?v=1676951190
H-17 ILLUSTRATED PARTS LIST
H17 Illustrated Parts List
Murrays Part# 50-87173000
Hobie® factory publication aids in identifying parts for the Hobie 17 and 17 Sport. Find the item number for the part you need and easily search the Murrays store.
The parts list is also available for free download at the Hobie Cat® Web site.
https://murrays.com/products/illustrated-parts-list-h18-h18sx
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-87166810.jpg?v=1676951192
H-18 ILLUSTRATED PARTS LIST
H18 Illustrated Part List
Murrays Part# 50-87166810
Hobie® factory publication aids in identifying parts for the Hobie® 18 and 18SX.
The parts list is also available for free download at the Hobie Cat® Web site.
https://murrays.com/products/illustrated-parts-list-h21
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-87167021.jpg?v=1676951192
H-21 ILLUSTRATED PARTS LIST
H21 Illustrated Parts List
Murrays Part# 50-87167021
Hobie® factory publications aid in identifying parts for the Hobie 21SC or SE. Find the item number for the part you need and easily search the Murrays store. Please note that Hobie Cat® is no longer fully supporting the Hobie 21 boats, so limited parts are available.
Hobie 21 parts lists and manuals are available for free download at the Hobie Cat® Product Support page.
https://murrays.com/products/inter-rudder-eye-adjustment-screw
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1000.jpg?v=1676951199
NACRA INTER RUDDER EYE ADJUSTMENT SCREW
Inter Rudder Eye Adjustment Screw
Murrays Part# 56-1000
Rudder adjustment eye screw for all Inters
Nacra Sailing factory item #30000
https://murrays.com/products/inter-spinnaker-bow-eye
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-2039.jpg?v=1676951200
NACRA SPINNAKER BOW EYE
Spinnaker Bow Eye
Murrays Part# 56-2039
Spinnaker bow eye for Inters
Nacra Sailing factory item# 30046
https://murrays.com/products/inter-lower-pintle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32076.jpg?v=1676951201
NACRA COUNTERSUNK LOWER RUDDER GUDGEON
https://murrays.com/products/internal-beam-casting-nacra
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/jetrescue-radio-bag-replacement-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/52-0950-1.jpg?v=1676951204
JET RESCUE BAG REPL KIT
https://murrays.com/products/jetrescue-bag-with-clamp-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/52-0950-2.jpg?v=1676951205
JET RESCUE BAG WITH CLAMP KIT
https://murrays.com/products/jib-car-stop-integrated-track
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/25231051_3_z5.jpg?v=1724280855
JIB CAR STOP (INTEGRATED TRACK)
Jib Car Stop (Integrated Track)
Murrays Part# 50-25231051
Hobie® factory replacement jib car stop for Hobie 16's with integrated track (1995 and later).
Hobie Part# 25231051
https://murrays.com/products/jib-halyard-block-assembly-h16-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/20240001z103.jpg?v=1725555182
HOBIE 16/18 JIB HALYARD BLOCK ASSEMBLY
H16/18 Jib Halyard Block Assembly
Murrays Part# 50-20240001
Wire jib halyard block for Hobie 16 or 18 has a sheave diameter of 1-1/2". This is a good upgrade for boats with jib halyard blocks that have a diameter smaller than 1-1/2".
Hobie part# 20240001
https://murrays.com/products/jib-clew-plate-3-hole
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-62270000.jpg?v=1676951208
JIB CLEW PLATE 3-HOLE
Jib Clew Plate 3-Hole
Murrays Part# 50-62270000
Hobie® factory replacement 3-hole jib clew plate (pair) with rivets.
Hobie 18 main sail clew plate
Hobie Part# 62270000
https://murrays.com/products/jib-halyard-s-hook-f18-infusion
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9937.jpg?v=1676951210
NACRA JIB HALYARD "S" HOOK
Jib Halyard "S" Hook
Murrays Part# 56-9937
Jib halyard "S" hook for Nacra F18 Infusion
Nacra Sailing factory item# 30334
https://murrays.com/products/jib-hank-h16-sol-cat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22090001-jib-hank.jpg?v=1676951212
H-16/SOL CAT JIB HANK
H16 and Sol Cat Jib Hank
Murrays Part# 50-22090001
Hobie® factory jib hank attaches the jib to the forestay of a Hobie® 16 or Sol Cat
https://murrays.com/products/jib-tack-hanger-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9890.jpg?v=1676951212
NACRA JIB TACK HANGER
Jib Tack Hanger
Murrays Part# 56-9890
Jib tack hanger for Nacras
Nacra Sailing factory item# 30325
https://murrays.com/products/jib-luff-zipper-h14-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-62300000.jpg?v=1676951213
H-14/18 JIB LUFF ZIPPER
H14/18 Jib Luff Zipper
Murrays Part# 50-62300000
Hobie® factory jib luff zipper for Hobie 14 or 18.
Hobie Part# 62300000
https://murrays.com/products/jib-track-end-stop-n5-5sl-n5-7-n5-8-n6-0-p18-2-p19
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-1911.jpg?v=1742317797
PRINDLE/NACRA JIB TRACK END STOP
Jib Track End Stop
Murrays Part# 56-1911
1 Jib track end stop. Fits Nacra 5.5SL, 5.7, 5.8, 6.0, as well as Prindle 18-2 and 19.
https://murrays.com/products/kite-and-wing-repair-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/54-7200-1.png?v=1676951215
AIRTIMEKITE KITE AND WING REPAIR KIT
https://murrays.com/products/jib-traveler-car-plate-only
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-25244001-1.jpg?v=1676951218
JIB TRAVELER CAR PLATE ONLY
Jib Traveler Car Plate Only
Murrays Part# 50-2524001
Hobie® factory replacement jib traveler car plate. Can be used on port or starboard side of the boat.
https://murrays.com/products/knit-beanie-by-forward-wip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/47-06725.jpg?v=1676951222
FORWARD WIP KNIT HORN BEANIE
https://murrays.com/products/kitefix-mini-repair-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/54-7201.jpg?v=1676951222
KITEFIX MINI REPAIR KIT
https://murrays.com/products/kook-proof-pigtail-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/pks_kook_proof_pigtail_set-1.jpg?v=1676951226
KOOK-PROOF PIGTAIL SET
Kook Proof Pigtail Set
Murrays Part# 54-4408
Kook Proof Pigtails come in complete 8-piece sets, set up in kook-proof fashion with different colors for inside and outside lines, and pre-set knots and pull-tabs for ease of use.
https://murrays.com/products/kona-rudder-foil-for-torqeedo-2-0-4-0
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/80-0200.jpg?v=1676951227
TORQEEDO 2.0/4.0 KONA RUDDER FOIL
KONA Rudder/Foil for Torqeedo 2.0/4.0
Murrays Part# 80-0200
KONA Rudder/Foil. Increase steering control and maneuverability of the KONA Deck Boat when added to your Torqeedo electric motor. No holes to drill.
https://murrays.com/products/kona-rudder-foil-for-torqeedo-503-1003
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/80-0210.jpg?v=1676951227
TORQEEDO KONA RUDDER FOIL 503/1003
KONA Rudder/Foil for Torqeedo 503/1003
Murrays Part# 80-0210
KONA Rudder/Foil. Increase steering control and maneuverability of the KONA Deck Boat when added to your Torqeedo electric motor. No holes to drill.
https://murrays.com/products/latex-ankle-seal-repair-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38-3012.jpg?v=1732059465
ANKLE SEAL REPAIR KIT
https://murrays.com/products/latex-neck-seal-repair-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38-3012-1.jpg?v=1706713382
NECK SEAL REPAIR KIT M/XL
https://murrays.com/products/latex-wrist-seal-repair-kit
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/lenses-for-barz-san-juan-acetate-polarized-gray
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/floater_lens-replacement_6b9283ac-678b-4ed4-8063-f334c172f6fb.jpg?v=1676951232
BARZ SAN JUAN ACETATE POLARIZED LENSES
https://murrays.com/products/lock-nut-25-x-28-lh-thread
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1056-1.jpg?v=1676950010
LOCK NUT 1/4 X 28
Lock Nut 1/4 X 28
Murrays Part# 002-1047-1
Tubular turnbuckle lock nut. Right hand thread.
https://murrays.com/products/lock-nut-25-x-28-rh-thread
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1056-1.jpg?v=1676950010
LOCK NUT 1/4 X 28
Lock Nut 1/4 X 28
Murrays Part# 002-1047-1
Tubular turnbuckle lock nut. Right hand thread.
https://murrays.com/products/low-beam-trim-caps-22mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2722.jpg?v=1676951252
HARKEN 22MM LOW-BEAM TRIM CAPS
Harken 22mm Low-Beam Trim Caps
Murrays Part# 28-2722
Trim caps finish track ends for end control assemblies. Use with Harken 22mm low-beam track.
Harken Part# 2722
https://murrays.com/products/low-stretch-8-strand-line-1-8-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39-2309.jpg?v=1715123907
1/8" LOW STRETCH 8-STRAND 3MM
Low Stretch 8-Strand 1/8 Black
Murrays Part# 39-2309BK
The result of design technology combining low-stretch, high strength and chafe resistance into one rope. Similar to Prestretched, but its softer, less textured finish means less friction in multi-purchase systems. Made in the USA. Sold per foot. Spool: 250' (76.2m). Compare to white Hobie Cat® line #RH018WHT or RH112WHT.
We recommend this line for use on batten ties and roller furling line, Prindle jib halyards and Prindle tramp lacing. This is
https://murrays.com/products/luff-track-update-h17-14-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50404111.jpg?v=1676951254
H-17 UPDATED LUFF TRACK
H17 Updated Luff Track 14.8
Murrays Part# 50-50404111
Factory luff track update for Hobie® 17 measures 14.8" long.
https://murrays.com/products/luff-track-update-12-5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50404101.jpg?v=1676951254
H-18/20 UPDATED LUFF TRACK 12.5"
H18/20 Updated Luff Track 12.5"
Murrays Part# 50-50404101
Hobie® factory aluminum luff track update is 12-1/2" long
The Hobie 20 need the extra strength to prevent the sail from pulling out of the luff track. The Hobie 18 uses this as an extension to the wave luff track, the extra strength is great but was not stock on the boat.
https://murrays.com/products/luff-track-getaway-102
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/37611151.jpg?v=1679514074
GETAWAY LUFF TRACK
Getaway Luff Track
Murrays Part# 50-37611151
Replacement luff track for the Hobie Getaway. 102"
Hobie Part# 37611150, 37611151
https://murrays.com/products/magic-marine-comfort-knee-pads
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Magic-Kneepads-Basic.jpg?v=1676951259
MAGIC MARINE KNEE PADS- JUNIOR
Magic Marine Knee Pads- Junior
Murrays Part# 34-18010002
Protect your knees with these Magic Marine comfort knee pads featuring 5mm padding on the kneecap and double neoprene strap around the leg. One size fits most.
S/XS is best for a junior or small adult
M/L/XL is the adult size
https://murrays.com/products/magic-marine-replacement-quick-release-hook
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/34-15099499.jpg?v=1676951258
MAGIC MARINE REPLACEMENT QUICK RELEASE HOOK
MAGIC MARINE REPLACEMENT SPREADER BAR QUICK REALEASE HOOK
https://murrays.com/products/main-fiberglass-batten-100-9-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/46-3020-8.jpg?v=1676951262
MAIN FIBERGLASS BATTEN 100"
Main Fiberglass Batten 100"
Murrays Part# 46-3020-6
Fiberglass battens are stronger and less expensive than foam battens, but also heavier. You trim the batten to the exact length needed (minimum 67").
https://murrays.com/products/main-fiberglass-batten-hobie-107-7-8-untapered
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/46-3020-7.jpg?v=1676951263
MAIN FIBERGLASS UNTAPERED BATTEN 107"
Main Fiberglass Untapered Batten 107"
Murrays Part# 46-3020-1
Fiberglass battens are stronger and less expensive than foam battens, but also heavier. You trim the batten to the exact length needed (minimum 87-5/16").
https://murrays.com/products/main-fiberglass-batten-hobie-42-11-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/46-3020-8_690000f3-e998-4151-ab4a-9f27dbe65010.jpg?v=1676951264
MAIN FIBERGLASS BATTEN 42-11/16"
Main Fiberglass Batten 42-11/16"
Murrays Part# 46-3020-8
Fiberglass battens are stronger and less expensive than foam battens, but also heavier. You trim the batten to the exact length needed (minimum 39-1/16").
https://murrays.com/products/main-fiberglass-batten-hobie-82-3-8-untapered
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/46-3020-8_9ee13037-4686-40ab-b958-346e3c16bf9e.jpg?v=1676951266
MAIN FIBERGLASS UNTAPERED BATTEN 83"
Main Fiberglass Batten 83" Untapered
Murrays Part# 46-3020-5
Fiberglass battens are stronger and less expensive than foam battens, but also heavier. You trim the batten to the exact length needed (minimum 72").
https://murrays.com/products/main-fiberglass-batten-hobie-90-1-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/46-3020-8_bdc45f64-52c9-4bfd-8ef4-f704383a0749.jpg?v=1676951267
MAIN FIBERGLASS BATTEN 90"
Main Fiberglass Batten Hobie 90"
Murrays Part# 46-3020-7
Fiberglass battens are stronger and less expensive than foam battens, but also heavier. You trim the batten to the exact length needed (minimum 46-1/8").
https://murrays.com/products/main-traveler-track-deep
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50252021.jpg?v=1676951267
MAIN TRAVELER TRACK (DEEP)
Main Traveler Track (Deep)
Murrays Part# 50-50252021
This Hobie® factory replacement deep traveler track for Hobie® 17 can also be cut to fit Hobie 14 or 16. Use 18 #19-5024 6-6 countersunk rivets for installation on Hobie 17.
https://murrays.com/products/main-halyard-hook-nacra-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6812-1.jpg?v=1676951268
PRINDLE/NACRA MAIN HALYARD HOOK
Main Halyard Hook
Murrays Part# 56-6812
Main halyard lock (hook) or all Prindles and older Nacras.
Nacra Sailing factory item# 30192
https://murrays.com/products/marine-goop-tube-3-7-oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-4001.jpg?v=1676951271
MARINE GOOP TUBE
https://murrays.com/products/marine-tex-white-2-oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-1338-1.jpg?v=1676951273
MARINE TEX WHITE
Marine Tex White 2oz
Murrays Part# 40-1338
Marine Tex is a heavy-duty structural epoxy that simplifies the most difficult repairs. This easy-to-use white putty can be molded to any shape and will bond to wood, steel, aluminum, fiberglass and most plastics. It sands smooth as glass and can be drilled, threaded and painted. 2 oz.
https://murrays.com/products/mast-assembly-h18-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/hobie-18-mast-60610010.jpg?v=1732214438
H-18 MAST ASSEMBLY
hobie-18-mast-60610010
https://murrays.com/products/mast-assembly-h20
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/mast-assembly-with-comptip-h16-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20610000.jpg?v=1676951277
H-16 MAST ASSEMBLY WITH COMP TIP
https://murrays.com/products/mast-ball-h17-wave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50212301.jpg?v=1676951277
H-17/WAVE MAST BALL
Mast Ball H17 Wave
Murrays Part# 50-50212301
Hobie factory replacement mast ball for Hobie® 17 and Wave. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole. This ball can also be glued for use on Trac 16.
https://murrays.com/products/mast-ball-h20-h21-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-30110001M.png?v=1676951277
H-20/21/GETAWAY MAST BALL
Mast Ball H20/21/Getaway
Murrays Part# 50-30110001
Hobie® factory replacement mast ball for Hobie® 20, 21 and Getaway. Ball measures 1-1/2" diameter with a 5/8"-18 threaded hole.
https://murrays.com/products/mast-ball-tiger-fox
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-F21062673.jpg?v=1676951280
TIGER/FOX MAST BALL
MAST BALL TIGER / FOX
50-F21062673
Hobie® factory replacement mast ball for Tiger and Fox. Ball measures 1-1/2" diameter with a 5/8"-13 threaded hole.
https://murrays.com/products/mast-base-casting-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-6605.jpg?v=1714417933
NACRA MAST BASE CASTING
Mast Base Casting
Murrays Part# 56-6605
Factory replacement mast base casting for Nacras except those with a carbon mast.
Nacra Sailing item# 30177
https://murrays.com/products/mast-base-casting-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37641001-1.jpg?v=1676951281
GETAWAY MAST BASE CASTING
Getaway Mast Base Casting
Murrays Part# 50-37641001
Hobie® factory replacement mast base casting for Getaway. Use four #19-5032 stainless rivets and four #19-5020 casings for installation.
https://murrays.com/products/mast-base-casting-h18-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60641031.jpg?v=1676951281
H-18 MAST BASE CASTING-BLACK
H18 Mast Base Casting-Black
Murrays Part# 50-60641031
Hobie® factory replacement black mast base casting for Hobie® 18. Use four #19-5032 rivets for installation.
https://murrays.com/products/mast-base-casting-p16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6005.jpg?v=1676951283
PRINDLE 16 MAST BASE CASTING
Mast Base Casting
Murrays Part# 56-6005
Mast base casting for Prindle 16
Nacra Sailing factory item# 30442
https://murrays.com/products/mast-base-h14-wave-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/10640011z103.jpg?v=1726087479
H-14/WAVE MAST BASE
H14/Wave Mast Base
Murrays Part# 50-10640011
Hobie® factory replacement black mast base for Hobie® 14 or Wave. Use four 6-6 rivets (#19-5032) for installation.
https://murrays.com/products/mast-base-casting-p18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6805-1.jpg?v=1676951285
PRINDLE 18 MAST BASE CASTING
Prindle 18 Mast Base Casting
Murrays Part# 56-6805
Black anodized mast base casting fits Prindle 18 only.
Nacra Sailing factory item# 30453
https://murrays.com/products/mast-base-h17-h20-tiger-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50416011.jpg?v=1676951287
H-17/20/TIGER MAST BASE
H17/20/Tiger Mast Base
Murrays Part# 50-50416011
Hobie® factory replacement black mast base for Hobie® 17, 20 or Tiger. Use two 6-6 rivets (#19-5032) for installation.
https://murrays.com/products/mast-base-washer-h17-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-52411001.jpg?v=1676951289
H-17 MAST BASE WASHER
H17 Mast Base Washer
Murrays Part# 50-52411001
Replacement washer for Hobie 17 mast base assembly.
Hobie Part# 52411001
https://murrays.com/products/mast-bearing-half-round-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-2007.jpg?v=1723565659
PRINDLE MAST BEARING HALF ROUND
Mast Bearing Half Round
Murrays Part# 56-2007
Half-round mast bearing for all Prindle mast steps.
Nacra Sailing factory item# 30964
https://murrays.com/products/mast-base-hinge-plate-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6816-1.jpg?v=1676951290
PRINDLE MAST BASE HINGE PLATE
Mast Base Hinge Plate
Murrays Part# 56-6816
Mast base hinge plate for Prindle 18, 18-2 and 19
Performance Sports factory item# 6816
https://murrays.com/products/mast-bearing-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60110000.jpg?v=1676951291
H-18 MAST BEARING
H18 Mast Bearing
Murrays Part# 50-60110000
Hobie Cat® factory mast bearing for Hobie 18. This part sits on the mast step to facilitate mast rotation on the Hobie 18.
Hobie part# 60110000
https://murrays.com/products/mast-foam-plug-h17-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60060000.jpg?v=1676951293
H-17/18 MAST FOAM PLUG
H17/18 Mast Foam Plug
Murrays Part# 50-60060000
Hobie® factory replacement foam plug for Hobie® 17 or 18 mast.
https://murrays.com/products/mast-getaway-lower
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/item-photo-coming-soon-v3.jpg?v=1679514174
GETAWAY LOWER MAST
https://murrays.com/products/mast-float-mounting-plate
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-39640020.jpg?v=1716561721
MAST FLOAT MOUNT PLATE
Mast Float Mount Plate
Murrays Part# 50-39640020
Mast float plate for the Hobie Baby Bob and the Mama Bob.
Sold individually
Hobie Part# 39640020
https://murrays.com/products/mast-halyard-hook-h17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50403011.jpg?v=1676951296
H-17 MAST HALYARD HOOK
H17 Mast Halyard Hook
Murrays Part# 50-50403011
Hobie® factory mast halyard hook for Hobie® 17.
Hobie Part# 50403011
https://murrays.com/products/mast-head-inter-nacra-for-carbon-masts
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6602CAR.jpg?v=1743447639
NACRA CARBON MAST HEAD
Carbon Mast Head
Murrays Part# 56-6602CAR
Nacra mast head for a carbon mast.
Nacra Part# 6602Car
https://murrays.com/products/mast-head-sheave-n4-5-n5-0-n5-2-n5-7
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6503.jpg?v=1676951298
HARKEN 38MM BIG BULLET SHEAVE
Harken 38mm Big Bullet Sheave
Murrays Part# 56-6503
The Mast Head Sheave NACRA 4.5, 5.0, 5.2, 5.7 is an upgraded replacement sheave for mast head on Nacra 4.5, 5.0, 5.2 and 5.7 has a Delrin® sheave with Delrin® ball bearings.
https://murrays.com/products/mast-head-casting-p16-escape
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6002-2.jpg?v=1676951299
NACRA MAST HEAD CASTING
Mast Head Casting
Murrays Part# 56-6002
Mast head casting for Prindle 16 and Escape
Nacra Sailing factory item# 30439
https://murrays.com/products/mast-head-sheave-pin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-10630001.jpg?v=1737754566
H-16 MAST HEAD SHEAVE PIN
H16 Mast Head Sheave Pin
Hobie Part# 50-10630001
This is a hollow rivet for installing the Hobie 16 masthead sheave on an all aluminum mast, large pulley masthead.
Requires special tools or creative minded sailor to improvise their own installation method
https://murrays.com/products/mast-head-base-sheave-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60620000.jpg?v=1676951302
H-18 MAST HEAD/BASE SHEAVE
H18 Mast Head/Base Sheave
Murrays Part# 50-60620000
Factory replacement sheave for Hobie 18 mast head/base and outhaul assembly.
Specs: 1" Diameter x 3/8" wide and 1/4" hole.
Also used as traveler control line turning sheave on 2005 and newer Hobie 16 sailboats.
Applications:
Hobie 18 - Mast head halyard sheave ; mast base halyard sheave ; outhaul car sheaves.
Hobie 16 - Jib Traveler line sheave. (in the H16 Race Corner Castings) use 50-8011251 Rivet
https://murrays.com/products/mast-hinge-pin-nacra-h17-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-f158-1.jpg?v=1676951302
NACRA MAST HINGE PIN
MAST HINGE PIN NACRA/H17/20
Murrays Part# 56-F158
The mast base engages the mast ball and is secured by this headless clevis pin to allow the mast to be safely raised or lowered.
Specs: 1/4" diameter x 2-3/8" overall length with a grip length of 1-15/16"
Compatibility: Nacra Inter, F18, N15, F17, 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ, as well as Hobie 17, Tiger and 20. Split rings are sold separately.
Compare to Hobie Cat part number 50406301.
https://murrays.com/products/mast-hound-p18-p18-2-p19
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6806.jpg?v=1676951304
PRINDLE 18/18.2/19 MAST HOUND
P18/18.2/19 Mast Hound
Murrays Part# 56-6806
Mast Hound for P18, 18-2 and P19
Prindle Part# 6806
https://murrays.com/products/mast-seal-plate-h17-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61080000.jpg?v=1676951305
H-17/18 MAST SEAL PLATE
H17/18 Mast Seal Plate
Murrays Part# 50-61080000
Replacement mast seal plate for the Hobie 17 or Hobie 18.
Hobie Part# 61080000
https://murrays.com/products/mast-seal-plate-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-21090001-1.jpg?v=1676951308
H-16 MAST SEAL PLATE
H16 Mast Seal Plate
Murrays Part# 50-21090001
Hobie® factory replacement mast seal plate for Hobie® 16.
https://murrays.com/products/mast-step-casting-p15-p16-p18-p19-escape
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-2006.jpg?v=1676951310
PRINDLE 15/16/18 MAST STEP CASTING
Prindle 15/16/18 mast step casting
https://murrays.com/products/mast-step-h14-wave-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-10170011-1-300x300.jpg?v=1740164824
H-14/WAVE MAST STEP
H14/Wave Mast Step
Murrays Part# 50-10170011
Mast step for Hobie 14 (without threaded post) and Wave (96 and older). Hobie® factory replacement part. If you have a H14 with threaded post order #50-20200011 (see below). Requires four 6-6 rivets (item #19-5032).
https://murrays.com/products/mast-step-pin-wave-getaway-25-x-2-detent
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8020451.jpg?v=1676951314
MAST STEP DETENT PIN .25x2"
Mast Step Pin Wave/Getaway .25 x 2" Detent
Murrays Part# 50-8020451
Replacement mast step pin / mast hinge pin for a Hobie Wave and Getaway. 1/4" x 2" detent pin.
Hobie part # 8020451
https://murrays.com/products/mast-step-kit-h18-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60180011.jpg?v=1676951314
H-18 MAST STEP KIT
H18 Mast Step Kit
Murrays Part# 50-60180011
Hobie® factory replacement mast step kit for Hobie® 18 includes mast step casting, post, bearing, screw and washer.
This is an upgrade for older Hobie 18's with threaded post.
https://murrays.com/products/mast-step-link-kit-h14-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21380001-H16-mast-step-link-kit.jpg?v=1676951315
H-14/16 MAST STEP LINK KIT
MAST STEP LINK KIT H14/16
Hobie part number 21380001
https://murrays.com/products/mast-support-wave-aft
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/mast-tang-h16-18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20690000-1.jpg?v=1676951319
H-16/18/GETAWAY MAST TANG
H16/18/Getaway Mast Tang
Murrays Part# 50-20690000
Hobie® factory replacement mast tang for Hobie® 16, 18, Getaway and the 1995 and newer Hobie® 17. Use twelve 6-4 rivets (#19-5031) and twelve casings (#19-5020) for installation.
Also known as a mast hound
https://murrays.com/products/mast-tang-small-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6607.jpg?v=1676951320
NACRA SMALL MAST TANG
Small Mast Tang
Murrays Part# 56-6607
Stainless steel mast tang with four mounting holes is used for jib halyard or mounting spinnakers on Nacra cats. Use four #19-5031 rivets and #19-5020 casings for installation.
Nacra part# 6607
https://murrays.com/products/mast-tang-h14-wave-spinnaker-tang
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/10690000z103.jpg?v=1726088045
HOBIE 14/WAVE MAST TANG
H14 Mast Spinnaker Tang
Murrays Part# 50-10690000
Hobie® factory replacement spinnaker tang or mast tang for Hobie 14 or Wave. Use six 6-4 rivets (#19-5031) and six 6-4 casings (#19-5020) for installation.
https://murrays.com/products/mclube-one-drop-ball-bearing-conditioner-5-oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-0410-1.jpg?v=1676951320
MCLUBE ONE DROP BALL BEARING CONDITIONER
McLube One Drop Ball Bearing Conditioner
Murrays Part# 40-0410
McLube One Drop Ball Bearing Conditioner is designed to be used on traveler cars and other ball bearing applications to improve performance by reducing rolling friction. This is the only product that Harken recommends for use on ball bearing travelers.
https://murrays.com/products/mirazyme-odor-eliminator-2-oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38-1904.png?v=1706658862
MIRAZYME ODER ELIMINATOR
Mirazyme Odor Eliminator 2 oz
Murrays Part# 38-1904
Great for cleaning odors out of wetsuits.
https://murrays.com/products/murrays-sail-boom-bag-big-dryer
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/31-2425.jpg?v=1739209328
BIG DRYER SAIL & BOOM BAG
https://murrays.com/products/n5-0-n5-7-tiller-arm-with-angle-28
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-5550.jpg?v=1676951330
NACRA 5.0/5.7 TILLER ARM WITH ANGLE 28"
https://murrays.com/products/n5-2-n5-8-tiller-arm-with-angle-31
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-5551.jpg?v=1676951335
NACRA 5.2/5.8 TILLER AREM WITH ANGLE 31"
N5.2/5.8 Tiller Arm with Angle 31"
Murrays Part# 56-5551
31" tiller arm with angle for Nacra 5.2 and 5.8.
Nacra Sailing factory Part# 30153
https://murrays.com/products/n6-0-tiller-arm-with-angle-34-5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-5553.jpg?v=1676951343
NACRA 6.0 TILLER ARM WITH ANGLE 34.5"
https://murrays.com/products/nacra-dolphin-striker-mast-support-rod
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-2507.jpg?v=1737585392
NACRA DOLPHIN MAST SUPPORT ROD
https://murrays.com/products/nacra-crossbar-bolt-chip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-2510-2-rotated_8af755c8-ffd7-452c-94bf-f3b0fe0fc8e2.jpg?v=1676951351
NACRA CROSSBAR BOLT CHIP
Nacra Crossbar Bolt Chip
Murrays Part# 56-2510
The Nacra Crossbar Bolt Chip is for beam mounting on Prindles and Nacras.
Nacra Sailing factory item# 30069
Prindle item# 2510
https://murrays.com/products/nacra-carbon-tiller-extension
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nacra-end-cap-with-hole
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-2503-1.jpg?v=1676951352
NACRA END CAP WITH HOLE
End Cap With Hole
Murrays Part# 56-2503
Nacra crossbar end cap. Used on all Nacras with round crossbars. Pictured with hole.
Nacra front crossbar end cap with hole part #2503, rear crossbar end cap without hole part #3503 Compatible with Nacra 4.5, 450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI, and 18SQ
https://murrays.com/products/nacra-gudgeon-slotted-6-0na-f18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1005.jpg?v=1676951354
NACRA SLOTTED GUDGEON
Nacra Gudgeon Slotted 6.0NA F18
Murrays Part# 56-1005
Nacra 6.0NA slotted gudgeon is Performance Sports factory item# 1005
https://murrays.com/products/nacra-front-beam-strap-n5-2-5-5-5-8-6-0
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-2509-2-rotated_e837845f-c82f-45d1-816b-484d7bc82df0.jpg?v=1676951354
NACRA FRONT BEAM STRAP
Front Beam Strap
Murrays Part# 56-2509
The Nacra Front Beam Strap is Nacra Sailing factory front beam strap #30068 fits the Nacra 5.2, 5.5, 5.5, 6.0 and 18SQ.
https://murrays.com/products/nacra-inter-20-tiller-arm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4583-1.jpg?v=1676951356
NACRA INTER 20 TILLER ARM
Nacra Inter 20 Tiller Arm
Murrays Part# 56-4583
Tiller arm for the Inter 20.
Nacra Part# 30124
https://murrays.com/products/nacra-illustrated-parts-list-old
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-0300.png?v=1676951358
NACRA ILLUSTRATED OLD PARTS LIST
Nacra Illustrated Old Parts List
Murrays Part# 56-0300
Performance Sports factory parts list for "older" Nacras, including Nacra 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5Uni, 18SQ.
https://murrays.com/products/nacra-inter-nf16-nf18-tiller-tie-bar-assembly
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4563.jpg?v=1676951359
NACRA F16/18INF TILLER TIE BAR ASSEMBLY
https://murrays.com/products/nacra-inter-tiller-tie-bar-fitting-with-tendon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4536-1_81edb8cf-c4de-4d59-bdfa-b340162a3842.jpg?v=1676951360
NACRA TILLER TIE BAR FITTING WITH TENDON
Tiller Tie Bar Fitting with Tendon
Murrays Part# 56-4536
Tiller tie bar fitting with tendon fits all Inters
https://murrays.com/products/nacra-mast-ball-1-1-4-old-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-C601-2.jpg?v=1676951362
NACRA NYLON MAST BALL 1-1/4" OLD STYLE
Nacra Mast Ball 1-1/4" Old (Nylon)
Murrays Part# 56-C601
This is the smaller, 1-1/4" mast ball for older, pre-1983 Nacra 5.0, 5.2 and 5.8. Hole diameter is 1/2".
https://murrays.com/products/nacra-jib-track-18-n5-5sl-n5-7-n5-8-p18-2-p19
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1910_b56f88af-ab66-43b4-948a-8e178c69536c.jpg?v=1676951364
NACRA 5.5/5.8/P18.2 JIB TRACK 18"
N5.5/5.8/P18.2 Jib Track 18"
Murrays Part# 56-1910
Nacra Jib Track 18"
Standard on Nacra 5.5SL, 5.7, and 5.8 as well as Prindle 18-2 and 19.
https://murrays.com/products/nacra-mast-ball-1-5-new-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-c601-1.jpg?v=1676951363
NACRA MAST BALL 1.5" (NYLON)
Mast Ball 1.5" (Nylon)
Murrays Part# 56-2504
This larger mast ball for post-1983 Nacras. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole.
Nacra Sailing factory item# 30338
https://murrays.com/products/nacra-mast-support-rod-with-nuts-washers
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-0428.jpg?v=1676951364
NACRA MAST SUPPORT ROD W/NUTS & WSHR
https://murrays.com/products/nacra-mast-head-casting-w-wire-halyard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6552-1.jpg?v=1676951367
NACRA MAST HEAD CASTING WITH WIRE HALYARD
Mast Head Casting With Wire Halyard
Murrays Part# 56-6552
Performance Sports factory Nacra mast head casting for early Nacras that had wire main halyards.
https://murrays.com/products/nacra-pivmatic-assembly-with-pin-aluminum-cleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-0266-1.jpg?v=1676951368
NACRA PIVMATIC ASSEMLY WITH PIN: ALUMINUM CLEAT
Nacra Pivmatic Assembly with Pin: Aluminum Cleat
Murrays Part# 56-0266-1
Positive, reliable and easy to install. Nacra rudders automatically kick up on contact with submerged objects with this rudder release fitting. This upgraded Pivmatic assembly has a heavy-duty aluminum cleat that is not as susceptible to wear and stripping as plastic. Complete kit for one side as shown.
https://murrays.com/products/nacra-roller-furling-rig-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-5051-1.jpg?v=1676951371
NACRA ROLLER FURLING RIG KIT
Nacra Roller Furling Rigging Kit
Murrays Part# 30-5051
Furl your jib while beached to save your sail from flapping or for when flying a spinnaker.
The Nacra Roller Furling Rig Kit Includes:
Harken® roller furling drum
10-hole adjuster and luff tension cleat attached
Upper and lower forestay with Ronstan® swivel
Halyard wire with block and shackle attached
Halyard line
Harken® Micro cleat with eye strap for front crossbar
All fasteners and instillation instructions
https://murrays.com/products/nacra-rudder-adjustment-eye-nut
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-F187.jpg?v=1676951372
NACRA RUDDER ADJUSTMENT EYE NUT
Nacra Rudder Adjustment Eye Nut
Murrays Part# 56-F187
This is the lock nut for the adjustment eye on the top of the rudder castings. Infusions MKiii rudder castings stopped using these eyes. Boats sold/ purchased after the release of the F18inf MKiii likely don't have that eye, and so this lock nut is not appropriate.
Rudder adjustment eye nut for all Inters is Nacra Sailing factory item #30363.
Fits Nacra 460, 500, 570,16,17, F18 Infusion and F20 Carbon
https://murrays.com/products/nacra-rudder-casting-upper-w-o-hardware-mkii
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nacra-rudder-head-roller
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4590-rotated_96d34284-b530-4a52-9495-cc9abfc2e302.jpg?v=1676951373
NACRA RUDDER HEAD ROLLER
https://murrays.com/products/nacra-rudder-base-casting
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nacra-rudder-kick-up-stop
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4018-2_49cf891f-4b7a-48a5-9ba8-ddfacd04f017.jpg?v=1676951375
NACRA RUDDER KICK-UP STOP
Rudder Kick-Up Stop
Murrays Part# 56-4518
The Nacra Rudder Kick-Up Stop is used on the Nacra 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ.
Performance Sports factory item# 4518
https://murrays.com/products/nacra-tiller-joint-3-urethane-rod
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4588-1-rotated_f5ae4ee6-1589-423a-9da5-18ed77e20207.jpg?v=1676951379
NACRA TILLER JOINT- 3" URETHANE ROD
Tiller Joint- 3" Urethane Rod
Murrays Part# 56-4588
The Nacra Tiller Joint - 3" Urethane Rod is for tiller connections on all Inters, the 500, 570, F18 Infusion and more. The part must be drilled to match your application.
Compare to Nacra Part# 4588
https://murrays.com/products/nacra-tiller-tie-bar-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-5516-1-rotated_7a9fbee4-50d4-4ad1-b0a3-d18b5cf502b6.jpg?v=1676951379
NACRA TILLER TIE BAR KIT
Tiller Tie Bar Kit
Murrays Part# 56-5516
The Nacra Tiller Tie Bar Kit provides improved tiller connect for older Nacras.
Nacra Sailing factory item# 30149 and 30150
https://murrays.com/products/nacra-inter-compression-sleeve
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-2506-2-rotated_09a0ddd3-65a1-428e-9c19-d9320d07710f.jpg?v=1676951382
NACRA COMPRESSION SLEEVE
Nacra Compression Sleeve
Murrays Part# 56-2506
The Nacra/Inter Compression Sleeve slips over the Nacra/Inter mast support rod between the nuts and washers to protect the front crossbar. The anodized aluminum tube measures 3-3/4" long x 5/8" ID.
Performance Sports Factory item #2506
https://murrays.com/products/nsi-proton-adjustable-footstrap-pair
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/54-9054.jpg?v=1676951388
NSI PROTON ADJUSTABLE FOOTSTRAP PR
NSI Proton Adjustable Footstrap Pair
Murrays Part# 54-9054
NSI's original kite specific footstrap has morphed into the Proton Kite Strap. The design offers all the comfort of the original Adam footstrap, with added convenience of NSI's unique cam buckle adjustment system for fast and easy customized size adjustment. Super lightweight performance, with a large adjustment range and easy "on-the-fly" adjustment. Sold in pairs
https://murrays.com/products/nsi-ratchet-footstrap-black-pair
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/54-9055.jpg?v=1676951388
NSI RATCHET FOOTSTRAP-BLACK (PR)
https://murrays.com/products/nsi-surf-n-skim-padz-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/54-9065-1.jpg?v=1676951392
NSI SURF 'N SKIM PADZ (SET)
https://murrays.com/products/nsi-surface-mount-strap-inserts-set-of-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/54-9064.jpg?v=1676951392
NSI SURFACE MOUNT STRAP INSERTS (4)
NSI Surface Mount Strap Inserts
Murrays Part# 54-9064
Set of four footstrap insert plates with specially formulated 3M peel-and stick adhesive for use on surface of surfboards and kiteboards. Includes screws.
https://murrays.com/products/nut-10-32-nylock-low-profile
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-8050211.jpg?v=1701450426
NUT 10-32 NYLOCK LOW PROFILE
Nut 10-32 Nylock Low Profile
Murrays Part# 50-8050211
Hobie factory low-profile Nylock 10-32 nut as used on EZ-Loc rudder assembly.
Hobie Part# 8050211
https://murrays.com/products/nut-12-24-nylock-hex
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2520-nylock-nut_763766a2-014f-456d-9e67-4b5bf7b3dfc5.jpg?v=1676951395
NUT 12-24 NYLOCK HEX
Nut 12-24 Nylock Hex
Murrays Part# 50-8050421
Hobie® factory replacement 12-24 nylock hex nut is used on Hobie 20 Miracle rudder gudgeon.
Hobie Part# 8050421
https://murrays.com/products/nut-jam-9-16-18-low-profile
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8050461.jpg?v=1676951396
NUT JAM 9/16-18" LOW PROFILE
Nut Jam 9/16-18 Low Profile
Murrays Part# 50-8050461
Hobie® factory replacement low-profile 9/16-18 jam nut is used on Hobie 17 dolphin striker.
Hobie Part# 8050461
https://murrays.com/products/nut-jam-h21
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8050151.jpg?v=1676951396
H-21 NUT JAM
H21 Nut Jam
Murrays Part# 50-8050151
Hobie® factory replacement 5/8"-18 jam nut for Hobie® 21.
Hobie Part# 8050151
https://murrays.com/products/nut-nylock-3-8-24
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8050511.jpg?v=1676951399
NUT NYLOCK 3/8-24"
Nut Nylock 3/8-24
Murrays Part# 50-8050511
Replacement 3/8-24 nylock nut is used on Hobie® 14, 16 and 18 dolphin striker rods, as well as Hobie® 17 inboard support.
Hobie Part# 8050511
https://murrays.com/products/nut-nylock-5-16-18-low-profile
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/low-profile-nylock-nut_c4be3a14-010b-42b0-b529-e89ba786a1ac.jpg?v=1676951400
NUT NYLOCK 5/16"-18 LOW PRO
Nut Nylock 5/16-18 Low Profile
Murrays Part# 50-8050331
Hobie® factory replacement low-profile 5/16-18 nylock nut.
Fits EZ Loc Upper and Lower Rudder Housing Hobie Bravo, Getaway and Wave.
Hobie Part# 8050331
https://murrays.com/products/nut-low-profile-5-16-24-nylock
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/low-profile-nylock-nut_9f362c27-a688-4b37-a381-6120a7dbd020.jpg?v=1676951400
NUT LOW PROFILE 5/16-24" NYLOCK
Nut Low Profile 5/16-24 Nylock
Murrays Part# 50-8050341
Hobie® factory replacement 5/16-24 low-profile nylock nut. Used in Hobie 18SX wings mounting bar kit (#50-65071001).
Hobie Part# 8050341
https://murrays.com/products/nut-nylock-lo-pro-1-4-20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/nylock-nut.jpg?v=1676951403
NUT NYLOCK LOW PROFILE 1/4-20"
Nut Nylock Lo-Pro 1/4-20
Murrays Part# 50-8050101
Hobie® factory replacement low profile 1/4-20 nylock nut. Used on Hobie 14 and 16 gooseneck assembly.
Hobie Part# 8050101
https://murrays.com/products/nyliner-roller-furler-drum-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8061101.jpg?v=1676951404
HOBIE ROLLER FURLING DRUM 1" NYLINER
https://murrays.com/products/nut-square-10-32
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8051301.jpg?v=1676951404
NUT SQUARE 10-32
NUT SQUARE 10-32
Murrays Part# 50-8051301
Hobie® factory replacement stainless steel 10-32 square nut can be used when mounting downhaul/halyard cleat on Hobie® 14 or 16.
Also can be used for mounting H17 trampoline eye straps. Use 19-2910 screw.
Hobie Part# 8051301
https://murrays.com/products/nyliner-3-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8061011.jpg?v=1676951404
NYLINER 3/8"
https://murrays.com/products/nylon-washer-internal-casting-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-F118.jpg?v=1676951407
PRINDLE NYLON WASHER INTERNAL CASTING
Nylon Washer Internal Casting Prindle
Murrays Part# 56-F118
Nylon washer is used on Prindle rudder casting to separate the upper sheaves to help keep the line from fouling. Order four per side to remove as much slop as possible.
Performance Sports factory item #F118
https://murrays.com/products/one-pump-self-stick-valve
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/61-6203.jpg?v=1676951407
ONE PUMP SELF-STICK VALVE
https://murrays.com/products/outhaul-car-bearing-pin-h18-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-60250000_2.jpg?v=1722981788
H-18/20 OUTHAUL CAR BEARING PIN
H18/20 Outhaul Car Bearing Pin
Murrays Part# 50-60250000
This pin is used to hole the bearings on the traveler car for an H-18 or Miracle 20 beachcat. This pin has been discontinued by Hobie, this part meets or exceeds OEM quality and specification.
Compare to Hobie Part# 6025000
https://murrays.com/products/outhaul-bearing-pin
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/outhaul-car-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-40230001.jpg?v=1722898709
H-20 BOOM OUTHAUL CAR
H20 Boom Outhaul Car
Murrays Part# 50-40230001
This is the outhaul car plate for the Hobie Miracle 20. It does not include the rollers or bearings. Hobie discontinued the traveler car and we are producing one to the same specifications.
Hobie part# 40230001
https://murrays.com/products/owners-manual-p18-2-p19
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9058-1.jpg?v=1676951415
PRINDLE 18.2/19 OWNERS MANUAL
https://murrays.com/products/owners-manual-p15-p16-p18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9050.jpg?v=1676951415
PRINDLE 15/16/18 OWNER MANUAL
Prindle 15/16/18 Owner Manual
Murrays Part# 56-9050
This is a copy of the original factory owner's manual for Prindle 15, 16 and 18 catamarans built by Performance Sports.
https://murrays.com/products/peel-n-stick-valve-kit-11mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/61-6202.jpg?v=1676951432
PEEL-N-STICK VALVE KIT 11MM
https://murrays.com/products/pin-swivel-3-16-h20-jib
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-41890001.jpg?v=1676951433
H-20 3/16" JIB SWIVEL PIN
H20 3/16 Jib Swivel Pin
Murrays Part# 50-41890001
Hobie® factory replacement pin swivel for Hobie® 20 jib.
https://murrays.com/products/peel-n-stick-valve-9mm-with-check-flap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/61-6201-1.jpg?v=1676951433
PEEL-N-STICK VALVE 9MM WITH CHECK FLAP
https://murrays.com/products/pintle-bolt-inter
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F161.jpg_2.jpg?v=1718810148
NACRA PINTLE BOLT
Pintle Bolt Inter
Murrays Part# 56-F161
Pintle bolt for all Nacra Inter
Performance Sports factory item #F161.
https://murrays.com/products/prindle-15-mast-head-casting
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6502-1.jpg?v=1676951449
PRINDLE MAST HEAD CASTING
Mast Head Casting
Murrays Part# 56-6502
Factory replacement mast head casting for Prindle 15 Catamaran
https://murrays.com/products/prindle-15-mast-base-hinge
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6516-1.jpg?v=1676951452
PRINDLE MAST BASE HINGE
Mast Base Hinge
Murrays Part# 56-6516
Mast base hinge plate for Prindle 15
Performance Sports Factory item# 6516
https://murrays.com/products/prindle-18-mast-head-casting
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6802.jpg?v=1676951454
PRINDLE 18 MAST HEAD CASTING
Prindle 18 Mast Head Casting
Murrays Part# 56-6802
Mast head casting for Prindle 18 only. Order pin and split ring separately.
Nacra Sailing factory item# 30452
https://murrays.com/products/prindle-19-and-18-2-mast-head-casting
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6902-1.jpg?v=1676951456
PRINDLE MAST HEAD CASTING
Mast Head Casting
Murrays Part# 56-6902
Mast head casting for Prindle 18-2 and 19.
Nacra Sailing factory item# 30459
https://murrays.com/products/prindle-4-aluminum-bar-for-bow-tang
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1811_-_Nacra_Sailing_factory_item_30387.jpg?v=1734031462
PRINDLE 4" ALUMINUM BAR FOR BOW TANG
4" ALUMINUM BAR FOR BOW TANG
Bow tang support rod for Prindle catamarans. Aluminum bar for bow tang on Prindle 15, 16 and 18 is Nacra Sailing factory item #30387.
https://murrays.com/products/prindle-bolt-plate-for-dolphin-striker
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-2008.jpg?v=1676951459
PRINDLE/ESCAPE BOLT PLATE
Bolt Plate
Murrays Part# 56-2008
Bolt plate for dolphin striker fits Prindle 15, 16, 18, Escape, 18-2, 19, 19MX.
Nacra Sailing factory item #30043
https://murrays.com/products/prindle-diamond-tang-3-hole-bottom
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6813-1.jpg?v=1676951460
PRINDLE DIAMOND TANG 3-HOLE BOTTOM
Diamond Tang 3-Hole Bottom
Murrays Part# 56-6813
The Prindle Diamond Tang 3-Hole (Bottom) is a 3-hole lower tang for diamond wire is for Prindle 18, 18-2 and 19. Performance Sailing factory item #6813; Nacra Sailing #31444.
https://murrays.com/products/prindle-centerboard-lock-bearing-p18-2-19
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4870-rotated_56fa74c2-8b2e-4743-bd0c-a1bfcdb6bc24.jpg?v=1676951463
PRINDLE CENTERBOARD LOCK BEARING
Prindle Centerboard Lock Bearing
P18.2 19
Murrays Part# 56-4870
Centerboard lock bearing for Prindle 18.2 & 19 is Nacra Sailing factory item #30429. Approximately 1" diameter x 5/16" high.
https://murrays.com/products/prindle-half-round-load-spreader
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/12ROUNDLOADSPREADERPRNDLE.jpg?v=1712184071
PRINDLE HALF ROUND LOAD SPREADER
Half Round Load Spreader
Murrays Part# 56-4019
This component is installed into the head of the rudder blade to anchor the rudder locking pin. The Prindle Half Round Load Spreader is for rudder system on all Prindles.
Prindle Part# 4019
Nacra sailing factory item# 30973
https://murrays.com/products/prindle-gooseneck-base-fitting
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-7807.jpg?v=1676951467
PRINDLE GOOSNECK BASE FITTING
Gooseneck Base Fitting
Murrays Part# 56-7807
The Prindle Gooseneck base fitting attaches to mast of Prindle 15, 16, 18, 18-2 and 19. Nacra Sailing factory item# 30202
https://murrays.com/products/prindle-jib-halyard-s-hook
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9839.jpg?v=1676951471
PRINDLE JIB HALYARD "S" HOOK
Jib Halyard "S" Hook
Murrays Part# 56-9839
The Prindle Jib Halyard "S" Hook is a welded stainless "S" hook for Prindle-style jib halyards. Nacra Sailing factory item #30507.
Performance sailing part# 9839
Nacra Sailing factory item# 30507
https://murrays.com/products/prindle-rudder-blade-p15-16-18
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/prindle-rudder-lock-release-strap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4010-1-rotated_fa4f2af1-417e-49b1-a3f0-9bc021a48ac6.jpg?v=1676951476
PRINDLE RUDDER LOCK RELEASE STRAP
Rudder Lock Release Strap
Murrays Part# 56-4010
This is one of two plates used in each rudder assembly on a Prindle beach cat. This is part of the internal assembly that moves up and down as part of the rudder pull up/down system. The Prindle Rudder Lock Release Strap is works on all Prindles.
Nacra sailing factory item# 30415
Prindle Part# 4010
https://murrays.com/products/prindle-rotator-bolt-reinforcement-plate
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-6821-1.jpg?v=1676951476
ROTATOR BOLT REINFORCEMENT PLATE
Rotator Bolt Reinforcement Plate
Murrays Part# 56-6821
Rotator bolt reinforcement.
Performance Sports factory item# 6821
https://murrays.com/products/prindle-tiller-arm-crossbar-end-cap-slotted
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-5006-1-rotated_6719c461-ab30-4878-93f4-b8308d7e8f22.jpg?v=1745866293
PRINDLE END CAP (SLOTTED) TILLER ARM
https://murrays.com/products/propeller-v8-p350-travel-cruise
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1901.jpg?v=1676951485
TORQEEDO V8/P350 TRAVEL/CRUISE PROPELLER
https://murrays.com/products/pumps-for-west-system-epoxy-universal
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-4104-1.jpg?v=1676951488
WEST SYSTEMS UNIVERSAL EPOXY PUMPS
West Systems Universal Epoxy Pumps
Murrays Part# 40-4104
These pumps screw onto West System epoxy resin and hardener to make dispensing and 5:1 metering easy and automatic. Made of durable polypropylene, the pumps give years of dependable service. Read and follow the priming, ratio verification and operating instructions that come with the pumps
https://murrays.com/products/propeller-v9-p790-travel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1917.jpg?v=1676951488
TORQEEDO V9/P790 TRAVEL PROPELLER
Torqeedo V9/P790 Travel Propeller
Murrays Part# 71-1917
Spare propeller for Torqeedo 1003 electric motor is an 11.5" x 8.1" variable-pitch-variable-camber (VPVC) propeller developed especially for the torque characteristic and performance range of Torqeedo-motors. Made of impact-resistant glass-fiber reinforced PBT (polybutylene terephthalate), the two-blade prop comes complete with washers, nut and shear pin.
For model Travel 503/1003. Ø 292 mm.
https://murrays.com/products/racing-rules-quizzes-through-2020
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/100-best-racing-rules-quizzes-through-2020.jpg?v=1676951490
BOOK: DAVE PERRY 100 BEST RACING RULES QUIZZES
Book: Dave Perry 100 Best Racing Rules Quizzes
Murrays Part# 45-0104
Dave Perry 100 Best Racing Rules Quizzes highlights specific aspects of the racing rules in an enjoyable format designed to help you become much more familiar with The Racing Rules of Sailing. Increase your knowledge of the rules and your racing will improve dramatically as you gain greater confidence making tactical decisions and maneuvering in close quarters. Based on The Racing Rules of Sailing for 2017-2020, the fifth edition
https://murrays.com/products/radio-shoulder-harness
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/11-0101.jpg?v=1676951492
RADIO SHOULDER HARNESS
Radio Shoulder Harness
Murrays Part# 011-0101
The Radio Shoulder Harness conveniently and securely holds a variety of VHF radio sizes. If your radio is not waterproof, add an Aquapac waterproof case for use in and around water. This harness is ideal for rescue services personnel! Ideal for marine environments, PWC, and sailors.
https://murrays.com/products/rear-inboard-support-casting-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61040001.jpg?v=1676951493
REAR INBOARD SUPPORT CASTING KIT
Rear Inboard Support Casting Kit
Murrays Part# 50-61040001
Hobie® factory rear inboard support casting kit. Requires one per side.
Hobie Part# 61040001
https://murrays.com/products/re-dek-traction-system-8-oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-2010-re-dek-traction.jpg?v=1676951494
RE-DEK TRACTION SYSTEM
Re-Dek Traction System
Murrays Part# 40-2010
Re-Dek is a quick and easy way to obtain permanent, professional-quality traction. The kit provides an easy step application process that allows you to customize the areas where permanent, no-slip traction is needed. Re-Dek can be applied right over graphics and artwork without hiding or distorting them.
https://murrays.com/products/replacement-tube-prindle-tiller
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/retainer-clip-h20-tiller-connector
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40590001.jpg?v=1676951499
H-20 TILLER CONNECTOR RETAINER CLIP
Hobie factory replacement retainer clip for Hobie 20-style tiller connector and adjuster kit (#07-1953). TILLER CONNECTION RETAINER CLIP - HOBIE 20. 40590000 MURRAYS.COM - IN STOCK
https://murrays.com/products/rig-tension-gauge-deluxe-metric
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/33-1795m.jpg?v=1676951500
RIG TENSION GAUGE DELUXE-METRIC
https://murrays.com/products/revivex-breathable-fabric-guard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-6536.png?v=1676951502
REVIVEX BREATHABLE FABRIC GUARD
Revivex Breathable Fabric Guard
Murrays Part# 40-6536
Spray-on water repellent for outerwear of all types of fabrics, including GORE-TEX®, Windstopper®, and all types of breathable laminates and synthetic fabrics. For all-season comfort, just machine wash, spray ReviveX®, then tumble dry (dryer-safe fabrics only!). Long-lasting ReviveX® is water-based, non-toxic and non-flammable. The 10 fl. oz. trigger spray bottle treats 2-4 garments.
https://murrays.com/products/rig-tension-gauge-deluxe-standard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/33-1795.jpg?v=1676951504
RIG TENSION GAUGE DELUXE-STANDARD
Rig Tension Gauge Deluxe
Murrays Part# 33-1795
The Deluxe Rig Tension Gauge is designed to provide an accurate measurement of the tension in standing rigging wire with accurate and repeatable tuning.
This product is built by Loose, and is also known as a Loose Gauge. The Loose gauge has been a standard for performance tuning for decades.
The Standard model #33-1795 gauges 3/32", 1/8" and 5/32" cable tension adjustment.
The Metric model #33-1795M is for cable sizes 2.5mm, 3mm and 4mm
https://murrays.com/products/rivet-a-3-16-x-5-8-countersunk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8010171.jpg?v=1676951504
RIVET AAC 6-10 3/16x5/8 CSK
Rivet AAC 3/16 x 5/8 CSK
Murrays Part# 50-8010171
Hobie® factory aluminum 3/16" x 5/8" countersunk rivet requires a rivet tool for installation.
https://murrays.com/products/rivet-6-8-hd-monel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8011231.jpg?v=1676951505
RIVET MCP 6-8 3/16x1/2" PH
RIVET MCP 6-8 3/16x1/2" PH
Murrays Part# 50-8011231
Hobie® factory 6-8 heavy duty rivet requires a rivet tool for installation. 3/16" x 1/2" pan head.
Fits Hobie Getaway Eyelet Post.
Fits Hobie 20 Eyelet Post.
Mounts Wave Mast Step
Hobie part number 8011231
https://murrays.com/products/rivet-3-16-x-5-16-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8010071.jpg?v=1676951506
RIVET 3/16X 5/16 ALUMINUM
Rivet 3/16 x 5/16 Aluminum
Murrays Part# 50-8010071
Hobie® factory aluminum 3/16" x 5/16" rivet. A rivet tool is required for installation.
https://murrays.com/products/robline-super-downhaul-line-3-8mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/39-1309-1.jpg?v=1676951508
SUPER DOWNHAUL LINE 3.8mm
Robline Super Downhaul Line 3.8mm
Murrays Part# 39-1309
FSE Robline's Super Downhaul line is specifically designed to handle the extreme high loads of large formula sailboard race sails. The Super Downhaul line's unique construction keeps the rope round under extreme downhaul loads, which allows it to hold extremely well in clam-style cleat bases. Smooth 12-plait construction and the slippery characteristics of 100% SK75 Dyneema fiber dramatically reduce friction in downhaul purchase systems.
https://murrays.com/products/roller-furler-darby-ring-large
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8062511.jpg?v=1676951510
ROLLER FURLER DARBY RING (LARGE)
Roller Furler Darby Ring (Large)
Murrays Part# 50-8062511
Hobie® factory replacement large darby ring for roller furler.
Hobie Part# 8062511
https://murrays.com/products/roll-pin-for-gooseneck-boom-pin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50502201.jpg?v=1676951510
HOBIE GOOSENECK BOOM PIN
Gooseneck Boom Pin
Murrays Part# 50-50502201
Hobie Cat gooseneck boom pin for securing boom assembly to mast at the gooseneck joint.
Hobie Part# 50502201
https://murrays.com/products/roller-furler-drum-ball-bearing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61670000.jpg?v=1676951510
HOBIE ROLLER FURLER BEARING
Roller Furler Drum Ball Bearing
Murrays Part# 50-61670000
Hobie® factory replacement bearing for Hobie roller furler. A total of 18 ball bearings are required per furler.
https://murrays.com/products/roller-furler-sleeve-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61940000.jpg?v=1676951512
HOBIE NYLON ROLLER FURLER SLEEVE
H18 Nylon Roller Furler Sleeve
Murrays Part# 50-61940000
Hobie® factory replacement nylon sleeve for roller furling assembly.
Hobie Part# 61940000
https://murrays.com/products/roller-furler-darby-ring-small
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8062501.jpg?v=1676951514
ROLLER FURLING DARBY RING (SMALL)
Roller Furling Darby Ring (Small)
Murrays Part# 50-8062501
Hobie® factory replacement small Darby ring for roller furler.
Hobie Part# 8062501
https://murrays.com/products/roller-furler-spool-housing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61960001.jpg?v=1676951514
ROLLER FURLER SPOOL & HOUSING
Roller Furler Spool Housing
Murrays Part# 50-61960001
Hobie® factory replacement spool and housing for roller furler.
https://murrays.com/products/roller-furler-yoke-assembly
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61980000.jpg?v=1676951517
H-18 ROLLER FURLER YOKE ASSEMBLY
H18 Roller Furler Yoke Assembly
Murrays Part# 50-61980000
Hobie® factory replacement yoke assembly for roller furler.
Hobie Part# 61980000
https://murrays.com/products/roller-furling-drum-forestay-adjuster
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60830000.jpg?v=1676951518
ROLLER FURLING DRUM FORESTAY ADJUSTER
Roller Furling Drum Forestay Adjuster
Murrays Part# 50-60830000
Hobie® factory replacement 13-hole adjuster for roller furler.
Hobie Part# 60830000
https://murrays.com/products/roller-furler-tube
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/HC-61910000.jpg?v=1676951518
H-18 ROLLER FURLER TUBE
H18 Roller Furler Tube
Murrays Part# 50-61910000
Hobie® factory replacement roller furler tube for roller furler.
Hobie Part# 61910000
https://murrays.com/products/roller-furling-kit-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-48921001.jpg?v=1676951520
H-20 ROLLER FURLING KIT
H20 Roller Furling Kit
Murrays Part# 50-48921001
Use the standard Hobie® 20 jib with no modification! The roller furling hardware kit for the Hobie® 20 includes patented Hobie furler drum, forestay, halyard system, and all necessary hardware and fasteners.
https://murrays.com/products/roller-furling-rig-kit-jib-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-5020.jpg?v=1736531270
H-16 ROLLER FURLING JIB KIT
https://murrays.com/products/roller-furling-rig-kit-jib-super-17
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/roller-furling-rig-kit-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-5061.png?v=1676951523
PRINDLE ROLLER FURLING RIG KIT
Prindle Roller Furling Rig Kit
Murrays Part# 30-5061
Furl your jib while beached to save your sail from flapping or for when flying a spinnaker. Prindle® kit includes: Harken® roller furling drum, upper forestay with Ronstan® swivel and 2" stainless steel ring, Harken® 279 cleat with eyestrap for front crossbar, fasteners and instructions. Please specify Prindle model.
https://murrays.com/products/rope-cutter-blade
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/33-199b-1_2b014022-5e2b-45ee-a5d0-5e0063799d99.jpg?v=1676951527
ROPE CUTTER REPLACMENT BLADE
Rope Cutter Replacement Blade
Murrays Part# 33-199B
Replacement blade for rope cutting tool (#33-199A)
https://murrays.com/products/rope-cutting-tool
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/33-199a-1_c5d0d3e9-88b2-4939-a7a8-3fdce6517c9a.jpg?v=1676951531
ROPE CUTTING TOOL W/BLADE
https://murrays.com/products/rudder-arm-slotted-p15-p16-p18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-5004.jpg?v=1734552298
PRINDLE SLOTTED RUDDER ARM
Prindle Rudder Arm Slotted P15/16/18
Murrays Part# 56-5004
22.5" Anodized slotted rudder arm fits all Prindle 15, 16 and 18
Nacra Sailing factory item #30430
https://murrays.com/products/rudder-blade-ez-loc-with-indents
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/20491000.jpg?v=1676951533
RUDDER BLADE EZ LOCK WITH INDENTS
Rudder Blade EZ Lock With Indents
Murrays Part# 50-20491000
Hobie is no longer producing two different nylon rudder blades. Use this part to replace your plastic rudder blades for Hobie 14, 16, 17 and 18 beach cats. This is the standard part that comes on Hobie Wave and Hobie Getaway boats with EZ Loc rudder systems
https://murrays.com/products/rudder-blade-nacra-460-500-570-580-n460-n500-n570-n580-f18-2004-2013
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/rudder-blade-n5-2-n5-5-n5-8-n6-0-n18sq
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/rudder-blade-n5-0-5-7-long
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/rudder-blade-old-style-inter-18-20
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/rudder-blade-nacra-f18-infusion-inter-18-20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4598-1.jpg?v=1676951539
NACRA F18 INFUSION RUDDER BLADE
F18 Infusion Rudder Blade
Murrays Part# 56-4598
Replacement new-style rudder blade for Nacra F18 Infusion and F20C, Inter 18 or 20 cats. Superior strength and consistent quality. Replaces Nacra Sailing factory item #30131. Technically, this is the same rudder blade as for Nacra 17, but without the sticker.
https://murrays.com/products/rudder-bolt-base-inter-all
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F188.jpg?v=1718809870
NACRA RUDDER BOLT BASE
Rudder Bolt Base Inter
Murrays Part# 56-F188
1/4-20 x 2" FHMS rudder bolt (base) for all Nacra Inters.
https://murrays.com/products/rudder-cam-pin-h17-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50312301.jpg?v=1676951543
H-18 RUDDER CAM PIN
H18 Rudder Cam Pin
Murrays Part# 50-50312301
Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
https://murrays.com/products/rudder-blade-tiger-2007
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/F99502280.jpg?v=1676951544
TIGER RUDDER 2007
Tiger Rudder 2007
Murrays Part# 50-F99502280
This is the only Tiger rudder blade available from Hobie Cat®. The factory upgrade carbon rudder is slightly lighter and stiffer than Hobie's standard Tiger rudder that is no longer available. New boats come with the carbon blades and new gudgeons. New gudgeons (#50-F18056012 upper; #50-F18056014 lower) must be purchased for older boats in order to accommodate the new blades.
https://murrays.com/products/rudder-bolt-head-inter
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F184.jpg?v=1718810960
NACRA RUDDER BOLT
Rudder Bolt
Murrays Part# 56-F184
Upper rudder bolt for all Inters.
Nacra Sailing factory item# 30362
https://murrays.com/products/rudder-cam-stop-plate-hobie
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20352000-1.jpg?v=1676951546
H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
H14/16/18/20/Wave Rudder Cam Stop Plate
Murrays Part# 50-20352000
Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings).
Hobie Part# 20352000
https://murrays.com/products/rudder-casting-cam-plastic
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10480000-1.jpg?v=1676951548
HOBIE RUDDER CAM
Hobie Rudder Cam
Hobie part number 10480000
Hobie factory replacement cam. Rudder cams should be inspected and replaced periodically. Always replace cams that are bent out of shape.
Used on all Hobie Catamarans with metal housing rudder systems. Compatible on all Hobie 14, 16, 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
Not compatible with the Hobie Wave and Getaway EZ Loc plastic rudder housing rudder system.
https://murrays.com/products/rudder-casting-cam-pin-1-4-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10470000-1.jpg?v=1676951550
H-16 RUDDER CAST CAM PIN 1/4"
H16 Rudder Casting Cam Pin 1/4"
Murrays Part# 50-10470000
Hobie® factory replacement flare cam pin for Hobie® 16 rudder casting is 1/4" diameter. Flaring this pin can be difficult, so Murrays recommends using #01-2051 sister screws in place of this stock pin.
https://murrays.com/products/rudder-casting-delrin-screw-all
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60450000_Hobie_delrin_rudder_screw.jpg?v=1734022239
HOBIE DELRIN RUDDER SCREW
RUDDER CASTING DELRIN SCREW - rudder locking adjustment screw - 60450000
https://murrays.com/products/rudder-casting-h17-h18-h20-upper-right
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50341001-Right-upper-rudder-casting.jpg?v=1676951552
H-17/18/20 UPPER RIGHT RUDDER CASTING
H17/18/20 Upper Right Rudder Casting
Murrays Part# 50-50341001
Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation.
Hobie Part# 50341001
https://murrays.com/products/rudder-casting-h17-h18-h20-wave-upper-left
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50321001-Left-Upper-Rudder-Casting.jpg?v=1676951554
H-17/18/20 UPPER RUDDER CASTING
H17/18/20 Upper Rudder Casting
Murrays Part# 50-50321001
Hobie® factory replacement upper left rudder casting for Hobie® 17, 18, 20 or Wave. Use four 6-8 rivets (#19-5033) for installation.
https://murrays.com/products/rudder-casting-lock-spring
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10432000-1_ee1c79b7-9d06-42ea-83a6-b0f9822bef8b.jpg?v=1676951555
HOBIE RUDDER SPRING
Rudder Casting Lock Spring
Murray Part# 50-10430000
Hobie factory replacement 2-1/8" lock spring for rudder casting. Replace rudder springs with this original spring supplied on Hobie® 14, 16, (pre 1983) 17 and 18.
Compare to HC part number 10430000
H14, H16, H17, H18, H20
https://murrays.com/products/rudder-casting-lower-adjustable-h16-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10412011-2.jpg?v=1676951556
Hobie 16 ADJUSTABLE LOWER RUDDER CASTING
H16 Adjustable Lower Rudder Casting
Murrays Part# 50-10412011
Black adjustable lower rudder casting for Hobie® 16 is a factory replacement part. Includes rudder cam.
This is the standard lower casting on Hobie 16 beachcats since 1983. There is an adjustable screw at the base of the casting to help adjust rudder rake and a slightly different casting shape than the earlier rudder castings. The spring length is also longer on these than pre '83 castings.
https://murrays.com/products/rudder-casting-lower-h17-h18-h20-getaway-wave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50322001-1.jpg?v=1676951560
H-17/18/20 LOWER RUDDER CASTING
H17/18/20 Lower Rudder Casting
Murrays Part# 50-50322001
Hobie® factory replacement lower rudder casting for Hobie® 17, 18, 20, Getaway and Wave. This casting does not fit Hobie® 14 or 16.
https://murrays.com/products/rudder-casting-only-left-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/IMG_6058-scaled.jpg?v=1676951560
PRINDLE LEFT RUDDER CASTING
Rudder Casting Only Left Prindle
Murrays Part# 56-4001
Left rudder casting for all Prindles does not include hardware. The remaining stock of clear anodized castings have not had their tiller arm hole machined and will likely not fit without additional machining.
Nacra Part# 30412
https://murrays.com/products/rudder-casting-plunger-h16-h14
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10440000-1.jpg?v=1676951563
H-14/16 RUDDER CASTING PLUNGER
Rudder Casting Plunger H14/16
Murrays Part# 50-10440000
Hobie® factory replacement rudder casting plunger for Hobie® 14 or 16.
https://murrays.com/products/rudder-casting-upper-right-h14-h16-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10362011-1.jpg?v=1676951564
H14/16 UPPER RIGHT RUDDER CASTING-BLACK
H14/16 Rudder Cast Upper Right Black
Murrays Part# 50-10362011
Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.
https://murrays.com/products/rudder-casting-spring-h16-long
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10432000-2.jpg?v=1676951564
HOBIE RUDDER SPRING-LONG
Murrays Part# 50-10432000
Hobie® factory 2½" spring for Hobie® 16 lower rudder casting. This spring is longer and stiffer than original equipment (#50-10430000), providing additional tension if you are having trouble with rudder kick up.
Used on Hobie 18 Rudder Systems from late 80s through now.
Used on Hobie 16 Rudder Systems after 1983
Used on Hobie Getaway Rudder Systems pre- EZ Loc
Hobie part number 10432000
https://murrays.com/products/rudder-casting-upper-left-h14-h16-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10352011-2.jpg?v=1676951567
H-14/16 UPPER LEFT RUDDER CASTING-BLACK
H14/16 Rudder Casting Upper Left Black
Murrays Part# 50-10352011
Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.
https://murrays.com/products/rudder-gudgeon-p15-p16-p18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1016.jpg?v=1676951567
NACRA RUDDER GUDGEON
Rudder Gudgeon
Murrays Part# 56-1016
Rudder gudgeon for Prindle 15, 16 and 18
Nacra Sailing factory item# 30993
https://murrays.com/products/rudder-locking-kit-h14-h16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10311900-Hobie-rudder-locking-kit.jpg?v=1734021641
H-14/16 RUDDER LOCKING KIT
RUDDER LOCKING KIT Hobie 16
Murrays Part# 50-10311900
Hobie factory rudder locking kit for Hobie 14 or 16 includes one each plunger, 2-1/2" spring (#50-10432000), and Delrin screw.
Delrin screw is 3/4-10 thread. In many cases you can drill it out with a 5/8" drill bit and then get a 3/4-10 tap to clear the threads.
https://murrays.com/products/rudder-covers-by-hobie
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/82420000_HOBIE_RUDDER_COVER.jpg?v=1734461614
HOBIE RUDDER COVER
Hobie Rudder Covers
Murrays PN 50-82420000
Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition).
These come as a pair.
Hobie part number 82420000
https://murrays.com/products/rudder-pin-bushing-lower
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-38360001-1.jpg?v=1676951572
HOBIE WAVE LOWER PINTLE BUSHING
Hobie Wave Lower Pintle Bushing
Murrays Part# 50-38360001
This is the lower bushing for the original Wave or Getaway rudder castings. This fits into the aluminum rudder castings PRE- EZLoc rudder assemblies. This also fits Getaway and Bravo Pre-Ez Loc assemblies.
Hobie Part# 38360001
https://murrays.com/products/rudder-plunger-h17-h18-h20-h21
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50312201.jpg?v=1676951574
H-17/18/GETAWAY RUDDER CAST PLUNGER
Hobie 18 rudder plunger. Hobie Part number 50312201. Also use on the 17 as well as the older Wave and Getaway
https://murrays.com/products/rudder-pivot-bolt
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F191.jpg?v=1718811220
NACRA RUDDER PIVOT BOLT 1/4-20"
Nacra Rudder Pivot Bolt 1/4-20"
Murrays Part# 56-F191
Countersunk rudder pivot bolt measures 1/4-20 x 1-7/8"
https://murrays.com/products/rudder-pin-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40880011.jpg?v=1676951576
H-20 RUDDER PIN (EACH)
H20 Rudder Pin
Murrays Part# 50-40880011
5/16" x 9-1/4" end-to-end, with 3/32" hole at each end. Cotter pins sold separately (#19-1015 3/32" x 3/4" each).
*****If your Hobie 20 has one piece rudder gudgeons, like H18, these pins will not fit.******
https://murrays.com/products/rudder-slack-bushing-h20-lower
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hbie_20_lower_rudder_bushing_-_40360001.jpg?v=1720029844
H-20 LOWER RUDDER SLACK BUSHING
H20 Lower Rudder Slack Bushing
Murrays Part# 50-40360001
This is the lower bushing for the Hobie Miracle 20 rudder casting. This uses the 5/16" stock rudder pins.
Compare to Hobie Part# 40360001
https://murrays.com/products/s-hook-wave-main-sheet
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-38900031-1.jpg?v=1676951580
WAVE MAINSTEET S HOOK
Wave Mainsheet S Hook
Murrays Part# 50-38900031
Hobie® factory replacement S-hook for Wave mainsheet. Mainsheet is 35 feet of Dacron® spun braid #39-055. Makes it easy to attach mainsheet to sail and standard on all new boats.
Hobie Part# 38900031
https://murrays.com/products/rudder-slack-bushing-h20-upper
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie_20_upper_rudder_bushing_-_40340001.jpg?v=1720029627
H-20 UPPER RUDDER SLACK BUSHING
H20 Upper Rudder Slack Bushing
Murrays Part# 50-40340001
This is the upper bushing for the Hobie Miracle 20 rudder casting. This uses the 5/16" stock rudder pins.
Hobie Part# 40340001
https://murrays.com/products/sail-jib-h17-sport-white-6oz-dacron
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-0403_H18_hyde_main_sail_-_White.jpg?v=1745604921
H-17 SPORT JIB SAIL (WHITE)
Getaway Mainsail (White)
Murrays Part# 30-6005
https://murrays.com/products/sail-jib-h14-white-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10992511.jpg?v=1676951582
H-14 ROLLER FURLING JIB SAIL (WHITE)
H14 Roller Furling Jib Sail (White)
Murrays Part# 50-10992511
Hobie® factory replacement white roller furling jib sail for Hobie® 14.
https://murrays.com/products/sail-jib-h17-sport-white-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/52992006.jpg?v=1676951583
H-17 SPORT JIB SAIL (WHITE)
H17 Sport Jib Sail (White)
Murrays Part# 50-52992006
Hobie® factory white replacement jib sail for the Hobie 17 Sport
https://murrays.com/products/ronstan-shock-block-10mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-8081.webp?v=1719349065
RONSTAN 10MM SHOCK BLOCK 3/8"-RED
The Sheaveless Ronstan Shock Block 10mm
The obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.
https://murrays.com/products/sail-jib-h20-white-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40992010.jpg?v=1676951588
H-20 JIB SAIL (WHITE)
H20 Jib Sail (White)
Murrays Part# 50-40992010
Hobie® factory replacement white jib sail for the Hobie 20.
https://murrays.com/products/sail-jib-h21sc-6-0oz-dacron
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-0403_H18_hyde_main_sail_-_White.jpg?v=1745604921
H-21SC 60Z DACRON JIB SAIL (WHITE)
Getaway Mainsail (White)
Murrays Part# 30-6005
https://murrays.com/products/sail-jib-h21se-horizontal-cut-6-0oz-dacron
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-0403_H18_hyde_main_sail_-_White.jpg?v=1745604921
H-21SE 6OZ DACRON JIB SAIL (WHITE)
Getaway Mainsail (White)
Murrays Part# 30-6005
https://murrays.com/products/sail-jib-p19-horizontal-cut-6-0oz-dacron
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-0403_H18_hyde_main_sail_-_White.jpg?v=1745604921
PRINDLE 19 6OZ DACRON JIB SAIL (WHITE)
Getaway Mainsail (White)
Murrays Part# 30-6005
https://murrays.com/products/sail-jib-sol-18-white-3-9oz-dacron
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/White-main-sail.jpg?v=1743439318
SOL 18 3.9OZ JIB SAIL (WHITE)
https://murrays.com/products/sail-jib-tiger-battened-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-0403_H18_hyde_main_sail_-_White.jpg?v=1745604921
TIGER JIB SAIL (WHITE)
Getaway Mainsail (White)
Murrays Part# 30-6005
https://murrays.com/products/sail-main-6-batten-h14-white-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10990010.jpg?v=1676951595
H-14 MAINSAIL (WHITE)
H14 Mainsail (White)
Murrays Part# 50-10990010
White Mainsail for the Hobie 14, made by Hobie Cat.
6 oz heavy duty dacron sail cloth for long term durability.
Comes with sail number preinstalled.
Fits all Hobie 14 sailboats.
https://murrays.com/products/sail-main-h17se-h17-sport-white-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/White-main-sail_7365d80a-4422-444e-9ae3-599aae18a8d1.jpg?v=1676951596
H-17SE/SPORT MAINSAIL (WHITE)
H17SE and Sport Mainsail (White)
Murrays Part# 50-52991000
Hobie® factory white replacement main sail for the Hobie 17SE and Hobie 17 Sport.
https://murrays.com/products/sail-main-h18sx-white-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/White-main-sail_2967ef0d-4852-424d-8754-8324bedf314f.jpg?v=1676951598
H-18SX MAINSAIL (WHITE)
H18SX Mainsail (White)
Murrays Part# 50-68991100
Hobie® factory white main sail for Hobie® 18SX.
https://murrays.com/products/sail-main-h20-white-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/White-main-sail_2345c66d-6495-4aba-8fa8-722a38470591.jpg?v=1676951600
H-20 MAINSAIL (WHITE)
H20 Mainsail (White)
Murrays Part# 50-40991000
Hobie® factory replacement white main sail for the Hobie 20.
https://murrays.com/products/sail-main-hobie-getaway-6-0oz-dacron
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-0403_H18_hyde_main_sail_-_White.jpg?v=1745604921
GETAWAY MAINSAIL (WHITE)
Getaway Mainsail (White)
Murrays Part# 30-6005
https://murrays.com/products/sail-main-wave-white-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/White_Wave_Mainsail.jpg?v=1738283676
WAVE MAINSAIL (WHITE)
Hobie Wave Mainsail-White
Murrays Part# 50-38991000
Description:
White mainsail for the Hobie Wave. A great alternative for those looking for a basic sail without colored panels.
https://murrays.com/products/sailing-rules-in-brief-2017-20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/45-0100.jpg?v=1676951606
RULES IN BRIEF CARD 2021-2024
https://murrays.com/products/sailing-flag-and-signal-sticker
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/45-0101.jpg?v=1676951607
FLAG & SIGNAL STICKER 2021-2024
Flag Signal Sticker 2021-2024
Murrays Part# 45-0101
US Sailing Sailing Flag and Signal Sticker. Indicates what race committee code flags mean on a waterproof vinyl sticker. Place on your front crossbar for easy flag index. 5-3/4" x 8-3/4".
https://murrays.com/products/screw-14-x-3-4-phsms
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8031891.jpg?v=1676951608
SCREW #14 X 3/4" PHMS
Screw #14 X 3/4 PHSMS
Murrays Part3 50-8031891
Hobie® factory replacement #14 x 3/4" pan head self-tapping sheet metal screw with Phillips head.
Hobie Part# 8031891
https://murrays.com/products/screw-1-4-20-x-1-thms-p-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8030701.jpg?v=1676951609
SCREW STAINLESS STEEL 1/4-20x1"
Screw 1/4-20 x 1" THMS-P SS
Murrays Part# 50-8030701
Hobie® factory replacement 1/4-20 x 1" stainless steel screw. Used on Hobie® pre-EZ-Loc rudder system, tendon tiller connector, rudder adjuster, Hobie 20 shroud anchor plate.
Applications:
H18/ Hobie 18 SX
Rudder Adjuster Screw: 1
Compare to Hobie Part# 8030701
https://murrays.com/products/screw-10-24-x-1-5-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8031031.jpg?v=1676951610
SCREW 10-24 X 1.5" (NYLON)
Screw 10-24 X 1.5" (Nylon)
Murrays Part# 50-8031031
Hobie® factory replacement nylon 10-24 x 1-1/2" screw is used on Hobie 18 front corner castings.
https://murrays.com/products/screw-1-4-20-x-3-8-rhms-p
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8030711.jpg?v=1676951611
SCREW 1/4-20 X 3/8" RHMS-P
Screw 1/4-20 X 3/8 RHMS-P
Murrays Part# 50-8030711
Hobie® factory replacement 1/4-20 x 3/8" stainless steel round head machine screw with Phillips head. Use two on Hobie® 20 jib car.
Hobie Part# 8030711
https://murrays.com/products/screw-10-32-x-75-p-fhms
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8030991.jpg?v=1676951612
SCREW 10-32 X .75 P-FHMS
https://murrays.com/products/screw-10-32-x-2-5-phms
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8032211.jpg?v=1676951613
SCREW 10-32X2.5" PHMS
Screw 10-32 X 2.5" PHMS
Murrays Part# 50-8032211
Hobie® factory replacement 10-32 x 2-1/2" pan head machine screw is used on Hobie 20 Miracle block hanger.
Hobie Part# 8032211
https://murrays.com/products/screw-5-16-18-x-2-phms-p-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8030291.jpg?v=1676951613
SCREW 5/16-18 X 2" PHMS-P SS
Screw Stainless Steel 5/16-18 X 2" PHMS-P
Murrays 50-8030291
Hobie® factory 5/16-18 x 2" stainless steel screw is used on Getaway spreader end cap.
Hobie Part# 8030291
https://murrays.com/products/screw-10-32-x-3-phms-phillips-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8032101.jpg?v=1676951615
SCREW 10-32 X 3 PHMS
Screw 10-32 x 3 PHMS Phillips Head
Murrays Part# 50-8032101
Hobie® factory #10-31 x 3" pan head machine screw with Phillips head.
Hobie Part# 8032101
https://murrays.com/products/screw-5-16-18-x-2-5-socket-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8032221.jpg?v=1676951616
SCREW 5/16 X 18 X 2.5" SOCKET HEAD
Screw 5/16-18 X 2.5" Socket Head
Murrays Part# 50-8032221
Hobie® factory replacement socket head screw bolt is 5/16-18 x 2-1/2". Hobie 17 and 17 Sport front and rear crossbar bolt.
Hobie Part# 8032221
https://murrays.com/products/screw-boom-clamp-10-24-x-1-25-fhms-s
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8031011.jpg?v=1676951617
SCREW 10-24x 1-1/4"
Screw Boom Clamp 10-24 X 1.25 FHMS-S
Murrays Part# 50-8031011
Hobie® factory replacement screw for the boom clamp (#50-61711000) on the Hobie 18. #10-24 x 1-1/4" flat head machine stainless screw with Phillips head.
Hobie Part# 8031011
https://murrays.com/products/screw-8-32-x-3-8-thms-roller-furler-drum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8030501.jpg?v=1676951617
SCREW 8-32X3/8" THMS
Screw 8-32 X 3/8" THMS Roller
Furler Drum
Murrays Part# 50-8030501
Hobie® factory replacement 8-32 x 3/8" screw for roller furler drum.
Hobie Part# 8030501
https://murrays.com/products/screw-delrin-3-8-16-x-75
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8032001.jpg?v=1676951619
SCREW DELRIN 3/8-16 X .75"
Screw Delrin 3/8-16 X .75"
Murrays Part# 50-8032001
Hobie® factory replacement 3/8-16 x 3/4" Delrin screw is used as rudder rake adjustment screw on Pre-EZ Lock Rudder System.
Hobie Part# 8032001
https://murrays.com/products/screw-es-soc-cap-5-16-18-x-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8031781.jpg?v=1676951620
SCREW E/S SOC 5/16-18 X 1"
Screw ES Soc Cap 5/16-18 X 1"
Murrays Part# 50-8031781
5/16"-18 x 1" soc head screw as used on Hobie® kayaks
Hobie Part# 8031781
https://murrays.com/products/screw-h20-connector-10-24-x-25
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8032401.jpg?v=1676951621
H-20 CONNECTOR SCREW 10X24X.25"
Screw H20 Connector 10-24 X .25"
Murrays Part# 50-8032401
Hobie® factory replacement screw for Hobie 20 tiller connector. Stainless steel 10-24 x 1/4" pan-head machine screw with Phillips head.
Hobie Part# 8032401
https://murrays.com/products/screw-rhms-1-4-20-x-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8030211.jpg?v=1676951621
SCREW RHMS 1/4-20 X 1"
Screw RHMS 1/4-20 X 1"
Murrays Part# 50-8030211
Hobie® factory replacement round head machine screw measures 1/4-20 x 1". Measurements are diameter and threads per inch times grip length.
Applications:
Hobie 18 - Shroud anchor plate screw
https://murrays.com/products/screw-fhsms-8-x-3-4-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8031501.jpg?v=1676951623
SCREW FHSMS #8 X 3/4" (SS)
Screw FHSMS #8 X 3/4 Stainless Steel
Murrays Part# 19-1621
Flat head, self tapping, stainless steel sheet metal screw #8 x 3/4"
Compare to Hobie Part 8031501
Used to mount swivel jam cleat and Jib Car Stop
https://murrays.com/products/screw-socket-head-5-16-24-x-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8031821.jpg?v=1676951624
SOCKET HEAD SCREW 5/16-24x2"
Screw Socket Head 5/16-24 x 2"
Murrays Part# 50-8031821
Hobie® factory replacement 5/16-24 x 2" socket head stud. Used in Hobie 18SX wing mounting kit.
Hobie Part# 8031821
https://murrays.com/products/screw-thms-1-4-20-x-1-5-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8030601.jpg?v=1676951625
SCREW THMS 1/4-20 X 1-5/8"
Screw THMS 1/4-20 X 1-5/8"
Murrays Part# 50-8030601
Hobie® factory replacement 1/4-20 x 1-5/8" screw.
Hobie Part# 8030601
https://murrays.com/products/screws-gudgeon-locking-long-package-of-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8030401.jpg?v=1676951627
GUDGEON LONG LOCKING SCREWS (16)
Gudgeon Long Locking Screws
Murrays Part# 50-8030401
Hobie® gudgeon self-locking #12-24 screws come in a package of 16.
https://murrays.com/products/selma-rope-splice-fid-individual
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/33-003.png?v=1676951628
SELMA FID 4.0mm 1/8-1/4"
The Selma fid (needle) is the only tool for splicing all kinds of rope. Selma fids are made of highly polished stainless steel. Made in Norway and patented worldwide.
Please note that the appropriate fid size will depend on the type and construction of line. The purchase of a set of 4 or 5 fids may be a better option if you are unsure of the fid size you need.
https://murrays.com/products/selma-rope-splice-fids-set-of-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Selma_fid-kit_x4_4.5mm-10mm.jpg?v=1734388998
SELMA ROPE SPLICE FIDS x4
Selma_fid-kit x4 4.5mm-10mm
https://murrays.com/products/shock-cord-pliers
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/33-0010-1.jpg?v=1676951632
SHOCK CORD PLIERS
Shock Cord Pliers
Murrays Part# 33-0010
Close stainless cinch rings completely without burring. These shock cord pliers are for all cinch rings up to 1/2". Made of plated, case-hardened steel with a spring grip. Hobie Cat® uses #83104 for this item.
https://murrays.com/products/sheave-jib-halyard-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61260000.jpg?v=1676951633
HOBIE JIB HALYARD BLOCK SHEAVE
HOBIE JIB HALYARD BLOCK SHEAVE
Murrays PN 50-61260000
Hobie® factory replacement sheave for jib halyard block. Used on Hobie 16s and 18s.
Hobie part number 61260000 and 61260010
https://murrays.com/products/shroud-anchor-bar-p15-p16-p18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1014.jpg?v=1676951634
PRINDLE SHROUD ANCHOR BAR
Prindle Shroud Anchor Bar
Murrays Part# 56-1014
Shroud anchor bar for Prindle 15, 16 or 18
Performance Sports factory item# 1014
https://murrays.com/products/side-loader-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1018.jpg?v=1676951638
NACRA SIDE LOADER
Nacra Side Loader
Murrays Part# 56-1018
Side loader holds daggerboard in place
Nacra Sailing factory item #30008.
https://murrays.com/products/shroud-eye-f18-infusion
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1867.jpg?v=1676951638
NACRA F18 INFUSION SHROUD EYE
F18 Infusion Shroud Eye
Murrays Part# 56-1867
https://murrays.com/products/shroud-anchor-plate-kit-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-64100001.jpg?v=1676951642
H-18 SHROUD ANCHOR PLATE KIT
H18 Shroud Anchor Plate Kit
Murrays Part# 50-64100001
The Shroud Anchor Plate Kit H18 is the Hobie® factory replacement shroud anchor plate kit for Hobie 18.
Applications:
This kit is also used to re-enforce the crossbar bolts on Hobie 18s with wings or the lighter H18 boats that were built from 1984-1988.
https://murrays.com/products/sidebar-h16-black-85x4x4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/20270011_1_z162.jpg?v=1725030047
H-16 SIDEBAR-BLACK
H16 Sidebar-Black
Murrays Part# 50-20270011
Hobie® factory replacement black sidebar for Hobie® 16.
https://murrays.com/products/side-loader-assembly-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1058.jpg?v=1676951645
NACRA SIDE LOADER ASSEMBLY
Nacra Side Loader Assembly
Murrays Part# 56-1058
Daggerboard side loader assembly for Nacra 5.8 or 6.0
Performance Sports factory item# 1058
https://murrays.com/products/sidebar-right-h14-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10280011.jpg?v=1676951646
H-14 RIGHT SIDEBAR-BLACK
H14 Right Sidebar-Black
Murrays Part# 50-10280011
Hobie® factory replacement black right sidebar for Hobie® 14.
https://murrays.com/products/sidebar-left-h14-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10270011.jpg?v=1676951646
H-14 LEFT SIDEBAR-BLACK
H14 Left Sidebar-Black
Murrays Part# 50-10270011
Hobie® factory replacement black left sidebar for Hobie® 14.
https://murrays.com/products/slingshot-1-pump-tubes-clips
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/download_c526cb5d-4d55-4596-80c4-1d830b943e14.jpg?v=1741474386
SLINGSHOT 1-PUMP TUBES AND CLIPS
https://murrays.com/products/skeg-saver-fin-plates
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/43-3007-1-300x300.jpg?v=1742413010
SKEG SAVER FIN PLATES (PAIR)
https://murrays.com/products/slingshot-pigtails-set-of-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/54-601.jpg?v=1676951655
SLINGSHOT PIGTAILS (KITE)
https://murrays.com/products/snuffer-hoop-mid-pole-nacra-460-nacra-500-nacra-570-nacra-16-nacra-17-nacra-f18-infusion-nacra-f20-carbon-nacra-f20-carbon-fcs
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9710.jpg?v=1676951658
NACRA MID POLE SNUFFER HOOP
Snuffer Hoop Mid Pole
Murrays Part# 56-9710
A snuffer funnels the spinnaker into the sock to facilitate launching and retrieval, even while sailing a triangular course. Keeps the tramp clean. This fiberglass Euro mid-pole ring attaches to spinnaker pole to guide the spinnaker in and out of the sock. 1.5"
https://murrays.com/products/snuffer-eye-tack-bridle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9642.jpg?v=1676951662
NACRA TACK AND BRIDLE SNUFFER EYE
Snuffer Eye (Tack & Bridle)
Murrays Part# 56-9642
Snuffer eye for all newer Nacras.
Performance Sports factory item# 9642
https://murrays.com/products/snap-on-split-cable-cover-6-ft-length
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/53-100.jpg?v=1676951663
SPLIT CABLE COVER 1/8"
https://murrays.com/products/snuffer-pole-bridle-ring-no-roller-furler
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9425.jpg?v=1676951663
NACRA SNUFFER POLE BRIDLE RING: NO ROLLER FURLER
Snuffer Pole Bridle Ring: No Roller Furler
Murrays Part# 56-9425
Snuffer pole bridle ring without roller furler for NACRA Inter 20 and NACRA Infusion MKI and MKII .
Nacra Sailing factory item# 30216
https://murrays.com/products/snuffer-pole-holder-ring-nacra-17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9653.jpg?v=1676951664
NACRA 17 SNUFFER POLE HOLDER RING
N17 Snuffer Pole Holder Ring
Murrays Part# 56-9653
Snuffer pole holder ring for Nacra 17. The three small rings are for attaching the pole stay wire and pole bridle wires.
Performance Sports factory item# 9653
https://murrays.com/products/snuffer-pole-extension-9
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9637.jpg?v=1676951665
NACRA 9' SNUFFER POLE EXTENSION
9" Snuffer Pole Extension
MUrrays Part# 56-9637
9" snuffer pole extension
Performance Sports factory item# 9637
https://murrays.com/products/snuffer-pole-carbon-8
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/snuffer-pole-pin-bracket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9626.jpg?v=1676951667
NACRA SNUFFER POLE PIN BRACKET
Snuffer Pole Pin Bracket
Murrays Part# 56-9626
Use this bracket to attach spinnaker pole (discontinued item #56-9622) to boat.
Nacra Sailing factory item# 30293
https://murrays.com/products/spinnaker-pole-cap-front-inter
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9631.jpg?v=1676951673
NACRA SPINNAKER POLE CAP FRONT INTER
https://murrays.com/products/spinnaker-pole-assembly-wave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/38999000.jpg?v=1676951675
WAVE SPINNAKER POLE AND ASSEMBLY
Wave Spinnaker Pole and Assembly
Murrays Part# 50-38999000
Hobie® designed this system for quick setup, ease of use, and maximum performance with better sail control with fewer lines. The factory spinnaker pole and hardware rig kit for Hobie® Wave contains all the equipment and lines to control hoisting, setting the tack, and sheeting the spinnaker, including pole, snuffer and hardware. Simply pull on the halyard to hoist the sail and the tack is hauled out to the end of the pole.
https://murrays.com/products/spinnaker-h16-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-F16032110.jpg?v=1676951676
H-16 AND GETAWAY SPINNAKER
H16 and Getaway Spinnaker
Murrays Part# 50-F16032110
Hobie® factory spinnaker only for Hobie® 16 or Getaway. Colors are subject to availability.
https://murrays.com/products/spinnaker-pole-holder-holt-allen
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9632.jpg?v=1676951676
NACRA SPINNAKER POLE HOLDER (HOLT ALLEN)
Spinnaker Pole Holder (Holt Allen)
Murrays Part# 56-9632
The pole holder ring with for Nacra 18/F18/20 with roller furler.
Performance Sports factory item #9632
https://murrays.com/products/spinnaker-pole-mounting-bracket-for-velocitek-speedpuck
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Spin-pole-mounting-bracket.webp?v=1742410494
VELOCITEK SPEEDPUCK SPINNAKER POLE MOUNTING BRACKET
https://murrays.com/products/spinnaker-pole-rear-end-cap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9625.jpg?v=1676951679
NACRA SPINNAKER POLE REAR END CAP
Nacra Spinnaker Pole Rear End Cap
Murrays Part# 56-9625
Use to attach spinnaker pole to boat. Outside diameter of cap is approximately 1-5/16". Fits: Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon FCS
Nacra Sailing factory item# 30775
https://murrays.com/products/spinnaker-wave-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/38999052.jpg?v=1676951680
WAVE SPINNAKER
Hobie Wave Spinnaker
Murrays Part# 50-38999052
Spinnaker sail for the Hobie Wave. Colors vary. This is the sail only.
Hobie Part# 38999052
https://murrays.com/products/spreader-arm-slide
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61440000.jpg?v=1676951680
HOBIE SPREADER ARM SLIDE
Spreader Arm Slide
Murrays Part# 50-61440000
Hobie® factory replacement spreader arm slide.
Discontinued by Hobie - feel free to email us to see about used options
https://murrays.com/products/spreader-arm-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-41420001.jpg?v=1676951681
H-20 SPREADER ARM
H20 Spreader Arm
Murrays Part# 50-41420001
Hobie® factory spreader arm for Hobie 20.
https://murrays.com/products/spreader-arm-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61420000.jpg?v=1676951683
H-18 SPREADER ARM
H18 Spreader Arm
Murrays Part# 50-61420000
Hobie® factory replacement spreader arm for Hobie® 18.
https://murrays.com/products/spreader-bar-3-hole-n6-0-na
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9920.jpg?v=1676951683
NACRA SPREADER BAR-3 HOLE
Spreader Bar 3-Hole
Murrays Part# 56-9920
Three-hole spreader bar for Nacra 6.0NA (North American).
Nacra Sailing factory item# 30329
https://murrays.com/products/spreader-bar-forward-n6-0-na
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9921.jpg?v=1676951684
NACRA SPREADER BAR FORWARD
Spreader Bar Forward
Murrays Part# 56-9921
Forward spreader bar for Nacra 6.0NA (North American)
Nacra Sailing factory item# 30330
https://murrays.com/products/spreader-bar-forward-fine-threaded-all-nacras
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9844.jpg?v=1676951685
NACRA FORWARD SPREADER BAR (FINE THREADS)
Spreader Bar Forward Fine Threaded
Murrays Part# 56-9844
Black spreader bar has fine threads that fit newer Nacra cats. Older Nacras may require the purchase of fine-threaded screws (#56-9851; one per side) and aft spreader bar (#56-9843) to ensure compatibility of all components.
Nacra Sailing factory item# 30336
https://murrays.com/products/spreader-bar-aft-all-nacras
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30335.jpg?v=1676951687
NACRA SPEADER BAR AFT
Spreader Bar Aft
Murrays Part# 56-9843
Black aft spreader bar for all Nacras. Older Nacras plus Blast and 500 may require the purchase of forward spreader bar (#56-9844) and screws (#56-9851; one per side) to ensure compatibility of all components.
Nacra Sailing factory item# 30335
https://murrays.com/products/spreader-bar-screw-fine-threads-all-nacras
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9851.jpg?v=1676951687
NACRA SPREADER BAR SCREW (FINE THREADS)
Spreader Bar Screw (Fine Threads)
Murrays Part# 56-9851
Black, fine-threaded screw (20/inch) fits newer Nacra cats, but may require fine-threaded forward spreader bar (#56-9844) and aft spreader bar (#56-9843) to ensure compatibility with older Nacras and Prindle 18, 18.2 and 19.
Nacra Sailing factory item# 30337
https://murrays.com/products/spreader-pole-assy-sport
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/spreader-brace-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-61430000.jpg?v=1737759333
H-18 SPREADER BRACE
H18 Spreader Brace
Murrays Part# 50-61430000
Hobie® factory replacement spreader brace for Hobie® 18.
https://murrays.com/products/spreader-brace-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-41430001.jpg?v=1676951690
H-20 SPREADER BRACE
H20 Spreader Brace
Murrays Part# 50-41430001
Hobie factory replacement spreader brace for Hobie 20.
https://murrays.com/products/spreader-pole-end-cap-h17-sport
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-52009001.jpg?v=1676951690
H-17 SPORT SPREADER POLE END CAP
H17 Sport Spreader Pole End Cap
Murrays Part# 50-52009001
Spreader pole end cap for Hobie 17 sport sailboat.
https://murrays.com/products/spreader-slide-h20
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/spreader-pole-yoke-h17-sport
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/spreader-pole-end-casting-h17-sport
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/spreader-tip-plate-all-nacras-p18-p18-2-p19
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9842.jpg?v=1676951694
NACRA SPREADER TIP PLATE
Spreader Tip Plate
Murrays Part# 56-9842
Spreader tip plate for all Nacras and Prindle 18, 18.2 and 19.
Nacra Sailing factory item# 30316
https://murrays.com/products/spreader-tip-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-41410001.jpg?v=1676951694
H-20 SPREADER TIP
H20 Spreader Tip
Murrays Part# 50-41410001
Hobie® factory replacement spreader tip for Hobie® 20.
Hobie Part# 41410001
https://murrays.com/products/stud-removable-8x50mm-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/19-2211.jpg?v=1741025342
REMOVABLE STUD (8x40mm)
https://murrays.com/products/strap-control
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/42-0201-300x300.jpg?v=1738195587
STRAP CONTROL
Strap Control
Murrays Part# 42-0201
Still the industry standard, Shred Tech Strap Control washers eliminate twisting by spreading the clamping load across the width of the footstrap. Injection molded using an unbreakable nylon material.
Sold Individually
https://murrays.com/products/stud-removable-8x40mm-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/19-2212.jpg?v=1741025177
REMOVABLE STUD (8X50mm)
https://murrays.com/products/sunfish-sail-custom-colors
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/sup-paddle-guard-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/62-0600.jpg?v=1676951713
SUP PADDLE GUARD KIT
https://murrays.com/products/tang-bow-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60120000.jpg?v=1676951715
H-18 BOW TANG
H18 Bow Tang
Murrays Part# 50-60120000
Hobie Cat® factory replacement bow tang for Hobie® 18.
https://murrays.com/products/tiger-cam-stop
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-F14061122.jpg?v=1676951724
TIGER CAM STOP
https://murrays.com/products/tiller-arm-bent-obsolete-h18-used
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/tiger-main-headboard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-F20041750.jpg?v=1676951731
TIGER MAIN HEADBOARD
Tiger Main Headboard
Murrays Part# 50-F20041750
Hobie® factory replacement headboard for Tiger main sail.
https://murrays.com/products/tiller-arm-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/37321111.jpg?v=1679510397
GETAWAY TILLER ARM
Getaway Tiller Arm
Murrays Part# 50-37321111
Hobie® factory replacement tiller arm for Getaway pre-EZ Loc system.
This does not fit the EZ Loc Rudder System
Hobie Part# 37321111
https://murrays.com/products/tiller-arm-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40380011.jpg?v=1676951733
H-20 TILLER ARM
H20 Tiller Arm
Murrays Part# 50-40380011
Hobie® factory replacement tiller arm for Hobie® 20.
https://murrays.com/products/tiller-arm-h17-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/download_0260eb16-a610-40d4-acb5-902066f31f33.jpg?v=1740093018
H-17 TILLER ARM-BLACK
H17 Tiller Arm-Black
Murrays Part# 50-50321111
Hobie® factory replacement black tiller arm tube for Hobie® 17.
https://murrays.com/products/tiller-arm-straight-h14-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10382010.png?v=1676951735
H-14 STRAIGHT TILLER ARM-BLACK
H14 Straight Tiller Arm-Black
Murrays Part# 50-10382010
Hobie® factory replacement black straight tiller arm for Hobie® 14.
Hobie Part# 10382010
https://murrays.com/products/tiller-arm-port-f18-infusion
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4550-1_17fa4b43-dba8-4460-a580-8e7bddadf452.jpg?v=1676951735
NACRA F18INF TILLER ARM-PORT
https://murrays.com/products/tiller-arm-starboard-f18-infusion
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4551-1_90a29b50-5b9d-4f1e-9452-d16513951773.jpg?v=1676951736
NACRA F18INF TILLER ARM-STARBOARD
Tiller Arm F18 Infusion-Starboard
Murrays Part# 56-4551
Starboard side tiller arm for Nacra F18 Infusion. Nacra Sailing factory item #30120.
https://murrays.com/products/tiller-arm-insert
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40660000.jpg?v=1676951737
HOBIE TILLER ARM INSERT
TILLER ARM INSERT Hobie factory tiller arm insert for 1953 tiller kit. Hobie part number 40660001. Murrays.com In stock
https://murrays.com/products/tiller-arm-straight-h16-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20382011-1.jpg?v=1676951739
H-16 STRAIGHT TILLER ARM-BLACK
H16 Straight Tiller Arm-Black
Murrays Part# 50-20382011
Hobie® factory replacement straight tiller arm for Hobie® 16. This tiller arm can be used on new or old Hobie 16 beachcats. The straight tiller arm allows for increased mast rake, by allowing the tiller x-bar to sit lower when the rudders are locked down. When used on pre '83 rudder casting assemblies, the tiller connector kit may touch the decks when the rudders are in the "up" position.
https://murrays.com/products/tiller-arm-wave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38321111_Hobie-wave-tiller-arm-original-300x300.jpg?v=1726096586
WAVE TILLER ARM
https://murrays.com/products/tiller-arm-straight-h18-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/H18-Tiller.jpg?v=1676951739
H-18 STRAIGHT TILLER ARM-BLACK
H18 Straight Tiller Arm-Black
Murrays Part# 50-60380111
Hobie® factory replacement black straight tiller tube for 1987 and later Hobie® 18. For Hobie 18's made in 1986 and before, a conversion kit (#50-60331010) is required.
https://murrays.com/products/tiller-arm-with-angle-27-n5-5-18-sq
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-5552.jpg?v=1676951741
NACRA TILLER ARM WITH ANGLE
Tiller Arm with Angle
Murrays Part# 56-5552
Tiller Arm with Angle 27" for NACRA 5.5 and 18-SQ
https://murrays.com/products/tiller-arm-swivel-end-cap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40650001.jpg?v=1676951741
TILLER ARM END CAP SWIVEL
TILLER ARM SWIVEL END CAP Hobie factory tiller arm swivel end cap for Hobie 20 Miracle rudder system 1953. Hobie part number 40650001
https://murrays.com/products/tiller-connector-end-cap-h20-style-1995-later
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40561001.jpg?v=1676951743
H-20-1995 & LATER TILLER CONNECTOR END CAP
Hobie® factory replacement end cap for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40561001 and 40561000
https://murrays.com/products/tiller-connect-end-cap-threaded-h20-style
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40550001.jpg?v=1676951743
HOBIE THREADED TILLER CONNECTOR END CAP 1953
Hobie® factory replacement part for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40550001. Murrays.com - In stock
https://murrays.com/products/tiller-connector-adjuster-threaded-h20-style
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40540001.jpg?v=1676951744
HOBIE THREADED TILLER CONNECTOR ADJUSTER
Hobie factory replacement part for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40540000 and 40540001. Murrays.com - in stock
https://murrays.com/products/tiller-connector-insert-bearing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40680001.jpg?v=1676951745
HOBIE TILLER CONNECTOR INSERT BEARING
Hobie factory tiller connector insert bearing for Hobie 20 Miracle. Hobie part number 40680001. Murrays.com - in stock
https://murrays.com/products/tiller-crossbar-adjustable-cap-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60400011M.jpg?v=1676951747
HOBIE TILLER CROSSBAR ADJUSTABLE END CAP
Tiller Crossbar Adjustable Cap Kit
Murrays Part# 50-60400011M
Murrays Tiller Crossbar Adjustable Cap Kit installs in the end of the Hobie tiller crossbar and allows you to adjust the width of the crossbar which controls the angel of the rudders.
Hobie discontinued this part and this is a Murrays Replacement part that we have made here in California.
Applications: H14, H16, H17, H18, Hobie 18 SX tiller x-bar
Tiller Crossbar Adjuster: 1
https://murrays.com/products/tiller-connector-rod-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40530001.jpg?v=1676951747
H-20 TILLER CONNECTOR POST
Hobie 20-style factory tiller connector post. Part of the Hobie 1953 tiller connection system. Hobie part number 40530000 and 40530001
https://murrays.com/products/tiller-connector-screw-club-wave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40530021.jpg?v=1676951748
GETAWAY TILLER CONNECTOR SCREW
Hobie Getaway Tiller Connector Screw
Murrays Part# 50-40530021
Hobie® factory replacement tiller connector screw for Club Wave.
Hobie Part# 40530021
https://murrays.com/products/tiller-crossbar-end-casting-prindle
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/tiller-crossbar-h14-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10520011.jpg?v=1676951750
TILLER X-BAR H14 BK
H14 Tiller Crossbar-Black
Murrays Part# 50-10520011
Tiller crossbar for Hobie 14.
Hobie Part# 10520011
https://murrays.com/products/tiller-crossbar-getaway-tendon-alum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/37522001.jpg?v=1676951751
GETAWAY TILLER CROSSBAR
Getaway Tiller Crossbar (Older Castings, Tendon Style Connectors)
Murrays Part# 50-37522001
Hobie Getaway tiller crossbar for boats with tendon style connectors and older style rudder castings.
Hobie Part# 37522001
https://murrays.com/products/tiller-crossbar-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/20521001-1.jpg?v=1676951755
H-20 TILLER CROSSBAR
H20 Tiller Crossbar
Murrays Part# 50-40521001
Hobie® factory replacement tiller crossbar for Hobie® 20.
https://murrays.com/products/tiller-end-cap-tendon-style
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37561001-1.jpg?v=1676951759
HOBIE TILLER END CAP (TENDON STYLE)
Hobie Tiller End Cap (Tendon Style)
Murrays Part# 50-37561001
Hobie® factory replacement tendon-style tiller end cap
Hobie Part# 37561001
https://murrays.com/products/tiller-end-cap-hobie
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10400010-2.jpg?v=1676951761
HOBIE TILLER END CAP
Hobie Tiller End Cap
Murrays Part# 50-10400010
Tiller arm end cap for Hobie Cats is a factory replacement part. Use two 6-6 rivets (item #19-5032) for installation.
https://murrays.com/products/tiller-end-cap-bravo-ez-loc
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-90560041.jpg?v=1676951761
BRAVO EZ LOC TILLER END CAP
Bravo EZ Loc Tiller End Cap
Murrays Part# 50-90560041
Hobie® factory tiller end cap for Bravo with EZ Loc rudder system.
Hobie Part# 90560041
https://murrays.com/products/tiller-end-cap-with-pin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37561203-1_9b3cfd89-4060-4566-bce0-a11b7fa8ad18.jpg?v=1676951763
TILLER END CAP WITH PIN
Tiller End Cap with Pin
Murrays Part# 50-37561203
Hobie® factory replacement tiller end cap with pin for '07 tiller connector.
Fits Hobie Getaway.
Hobie Part# 37561203
https://murrays.com/products/tiller-tie-bar-u-bracket-nacra-starboard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-0149.jpg?v=1676951765
NACRA TILLER TIE BAR U-BRACKET-STARBOARD
Nacra Tiller Tie Bar U-Bracket Starboard
Murrays Part# 56-0149
Starboard side tiller tie bar U-bracket for Nacra is Nacra Sailing factory item #30149.
https://murrays.com/products/tiller-extension-bushing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40600001.jpg?v=1676951767
HOBIE TILLER BUSHING EXTENDER
HOBIE TILLER EXT BUSHING
Murrays Part# 50-40300001
This is the bushing that goes into the tiller crossbar of most Hobiecat Sailboats. This part was discontinued or otherwise no longer available as a separate part.
Compare to Hobie part# 40600001
https://murrays.com/products/tiller-tie-bar-u-bracket-nacra-port
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-0150.jpg?v=1676951767
NACRA TILLER TIE BAR U-BRACKET-PORT
Nacra Tiller Tie Bar U-Bracket Port
Murrays Part# 56-0150
Port side tiller tie bar U-bracket for Nacra
Nacra Sailing item# 30150
https://murrays.com/products/toggle-h20-jib-halyard-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie-20-jib-halyard-toggle-41880001.jpg?v=1676951769
H-20 JIB HALYARD SWIVEL TOGGLE
H20 Jib Halyard Swivel Toggle
Murrays Part# 50-41880001
Hobie® factory replacement jib halyard toggle for Hobie® 20 Miracle.
https://murrays.com/products/torqeedo-battery-charger-350w-for-power-26-104
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-2206.jpg?v=1676951769
TORQEEDO BATTERY CHARGER
https://murrays.com/products/torqeedo-battery-spare-lima-for-ultralight-403
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1413.jpg?v=1676951773
TORQEEDO BATTERY SPARE LIMA FOR ULTRALIGHT 403
Torqeedo Battery Spare LIMA for Ultralight 403
Murrays Part# 71-1413
Replacement high-performance lithium battery for #71-1403 Torqeedo Ultralight 403. Integrated GPS receiver, 320 Wh, 29.6 V, 11 Ah.
https://murrays.com/products/torqeedo-charger-40-w-for-travel-ultralight-batteries
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1127.jpg?v=1676951775
TORQEEDO CHARGER 40 W FOR TRAVEL & ULTRALIGHT BATTERIES
https://murrays.com/products/torqeedo-extension-for-cable-set-cruise-models
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1204.jpg?v=1676951778
TORQEEDO CABLE EXTENSION
Torqeedo Extension
Murrays Part# 71-1204
Motor cable extension set for Torqeedo Cruise motor models is 78" long with high-current plugs.
https://murrays.com/products/torqeedo-fast-charger-power-26-104
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-2208.jpg?v=1676951779
TORQEEDO FAST CHARGER POWER 26-104
Torqeedo Fast Charger Power 26-104
Murrays Part# 71-2208
Charges the Power 26-104 from 0 to 100% in a maximum of 3 hours.
Watertight to IP65
Charge current 40 A
Please Call for Price.
https://murrays.com/products/torqeedo-fuse-58v-125a
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/shopping.webp?v=1738356214
TORQEEDO FUSE 58V-125A
Torqeedo Fuse 58V-125A
Murrays Part# 71-0190
This fuse is a replacement part for Torqeedo 2.0 and 4.0 motors and is a part of the battery connection cable.
https://murrays.com/products/torqeedo-magnetic-key-for-cruise-r-503-1003-ultralight
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1914.jpg?v=1676951782
TORQEEDO MAGNETIC KEY
https://murrays.com/products/torqeedo-skeg-for-cruise-alum-from-2015
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-9258.jpg?v=1676951786
TORQEEDO SKEG FOR CRUISE
Torqeedo Skeg for Cruise
Murrays Part# 71-9258
Protects the outboard from running onto ground.
Enhanced aluminum fin in molded PU foam.
Only compatible with Cruise models
Protects the outboard from running onto ground.
Enhanced aluminum fin in molded PU foam.
Only compatible with Cruise models part no. 1230-00 to 1237-00 from 2015 onwards.
Warranty: 2 years for non-commercial use
https://murrays.com/products/torqeedo-skeg-cruise-2-0-tiller
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-9228.jpg?v=1676951786
TORQEEDO SKEG CRUISE 2.0 TILLER
Torqeedo Skeg Cruise 2.0 Tiller
Murrays Part# 71-9228
Replacement skeg for Torqeedo Cruise 2.0 Tiller model. Torqeedo #9228-00
https://murrays.com/products/torqeedo-small-key
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/torqeedo-skeg-for-cruise-remote
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-9234.jpg?v=1676951789
TORQEEDO SKEG FOR CRUISE REMOTE (2009-2016)
Torqeedo Skeg for Cruise Remote
Murrays Part# 71-9234
Replacement skeg for Torqeedo Cruise Remote models is Torqeedo item #9234-00.
Warranty: 2 years for non-commercial use
Protects the outboard from running onto ground.
Only compatible with Cruise models part no. 1209-00 to 1223-00.
https://murrays.com/products/torqeedo-skeg-for-travel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/9145.jpg?v=1676951789
TROQEEDO SKEG FOR TRAVEL MOTORS
https://murrays.com/products/torqeedo-spare-propeller-for-cruise-models
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1915.jpg?v=1676951791
TORQEEDO SPARE PROPELLER FOR CRUISE MODELS (2009-2016)
Torqeedo Spare Propeller for Cruise Models
Murrays Part# 71-1915
This spare propeller is for Cruise 2.0 and 4.0 Remote models, as well as Cruise Tiller models with serial numbers greater than 5000. The variable-pitch-variable-camber (VPVC) propeller has slower speed, lower efficiency and higher thrust characteristics. It was developed especially for the torque characteristic and performance range of Torqeedo motors. Made of impact-resistant glass-fiber reinforced PBT (polybutylene terephthalate), it
https://murrays.com/products/torqeedo-spare-propeller-high-speed-for-cruise-2-0-4-0
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1923.jpg?v=1676951793
TORQEEDO SPARE PROPELLER HIGH-SPEED FOR CRUISE 2.0/4.0
https://murrays.com/products/torqeedo-spare-propeller-high-speed-2-0-4-0-for-cruise
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1916.jpg?v=1676951793
TORQEEDO SPARE PROPELLER HIGH-SPEED 2.0/4.0 FOR CRUISE
https://murrays.com/products/torqeedo-spare-propeller-for-ultralight-402-403
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1912.jpg?v=1676951793
TORQEEDO SPARE PROPELLER FOR ULTRALIGHT 402/403
Torqeedo Spare Propeller For Ultralight 402, 403
Murrays Part# 71-1912
Torqeedo 8" x 8" variable-pitch-variable-camber (VPVC) propeller was developed specially for kayaks and other ultra-light boats. Made of impact-resistant, glass-fiber reinforced PBT (polybutylene terephthalate). Comes complete with nuts, disc springs and shear pin.
https://murrays.com/products/torqeedo-throttle-extension-cable-15-ft
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1922.jpg?v=1676951796
TORQEEDO THROTTLE EXTENSION CABLE 15FT
Torqeedo Throttle Extension Cable 15 ft
Murrays Part# 71-1922
Extension cable for Travel 603/1003/1103, Ultralight and Cruise models. Allows greater distance between throttle / tiller and motor.
https://murrays.com/products/torqeedo-tiller-throttle-for-503-1003
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/torqeedo-spare-part-000-00218-1200x1200-1.jpg?v=1676951796
TORQEEDO TILLER THROTTLE FOR 503, 1003
Torqeedo Tiller-Throttle for 503, 1003
Hobie Part# 71-1143-21
Torqeedo replacement complete assembly tiller/throttle/GPS dashboard display (battery, range, speed, input power) can be used remotely with cable extension #71-1921 or #71-1922. Tiller TXX3 is Torqeedo item #000-00218
https://murrays.com/products/torqeedo-throttle-extension-cable-5-ft
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/1921.jpg?v=1676951797
TORQEEDO THROTTLE EXTENSION CABLE 5FT
Torqeedo Throttle Extension Cable 5 ft
Murrays Part# 71-1921
Extension cable for Travel 603/1003/1103, Ultralight and Cruise models.
Allows greater distance between throttle / tiller and motor.
Length: 1.5 m.
2 Year warranty for non commercial use.
https://murrays.com/products/tramp-lacing-rod-wave-49
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie-Wave-Trampoline-Lacing-Rod-38881011__10029.jpg?v=1740083278
WAVE TRAMPOLINE LACING ROD 49"
Wave Trampoline Lacing Rod 49"
Murrays Part# 50-38881011
Hobie® factory lacing rod for Wave Classic trampoline.
Hobie Part# 38881011
https://murrays.com/products/tramp-aft-lacing-strip-h18-white
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-63780000.jpg?v=1676951799
H-18 TRAMPOLINE AFT LACING STRIP-WHITE
H18 Trampoline Aft Lacing Strip-White
Murrays Part# 50-63780000
Hobie® factory replacement white vinyl aft lacing strip only for Hobie® 18.
https://murrays.com/products/tramp-lacing-rod-getaway-forward-68
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-37880001.jpg?v=1727281936
GETAWAY FORWARD TRAMPOLINE LACING ROD 68"
Getaway Forward Trampoline Lacing Rod- 68"
Murrays Part# 50-37880001
Trampoline lacing rod for the front of the Hobie Getaway trampoline.
Hobie Part# 37880001
https://murrays.com/products/tramp-track-wave-club
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Wave-Tramp-Track.jpg?v=1676951802
WAVE CLUB TRAMPOLINE TRACK
Wave Club Tramp Track
Murrays Part# 50-39341011
Hobie® factory replacement tramp track for Wave Club. The Wave Club has a three-piece trampoline and the shrouds and bridles connect with clevis pins. Special order item.
https://murrays.com/products/tramp-strap-aft-wave-se
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38970061Hobiewavetrampolinestrap.jpg?v=1736792189
WAVE TRAMPOLINE TENSION STRAP
Hobie Wave Trampoline Tension Strap
Murrays Part# 50-38970061
Replacement strap for tensioning the Hobie Wave trampoline. Each boat requires four straps.
https://murrays.com/products/trampoline-freestyle-474-mesh-black
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-h20-mesh-black-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40970055.jpg?v=1676951808
H-20 MESH TRAMPOLINE-BLACK
H20 Mesh Trampoline-Black
Murrays Part# 50-40970055
Hobie® factory replacement mesh trampoline for the Hobie 20. For lacing, order 15 feet of 3/16" line #39-1211BK.
https://murrays.com/products/trampoline-h18-white-vinyl-set-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60970000.jpg?v=1676951811
H-18 VINYL TRAMPOLINE SET-WHITE
H18 Vinyl Trampoline Set-White
Murrays Part# 50-60970000
White vinyl trampoline for Hobie 18.
Hobie Part# 60970000
https://murrays.com/products/trampoline-h21sc-black-mesh-forward-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-36980055.jpg?v=1740081780
H-21 SPORT CRUISER FORWARD MESH TRAMPOLINE-BLACK
H21 Sport Cruiser Forward Mesh Trampoline-Black
Murrays Part# 50-36980055
Factory replacement forward trampoline for Hobie 21 Sport Cruiser is Hobie® class legal for racing.
For lacing, order 14 feet of 3/16" line #39-2311BK.
The H21SC is sometimes confused with the H21SE (Special Edition). Please note that the H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rig.
Hobie Part# 36980055
https://murrays.com/products/trampoline-sol-18-mesh-black
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-nacra-460-with-line-kit
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-sol-15-mesh-black
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-super-cat-17-mesh-black-new-style
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-trac-16-mesh-1-piece-bias-cut
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-super-cat-17-mesh-black-old-style
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-trac-14-mesh-1-piece-bias-cut
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-track-84-nacra-prindle
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-track-h17
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/trampoline-venture-15-mesh-black
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/traveler-adjustment-indicator-decal
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-40210001.jpg?v=1737759239
TRAVELER ADJUSTMENT INDICATOR DECAL
Traveler Adjustment Indicator Decal
Murrays Part# 50-40210001
Hobie® factory traveler adjustment indicator decal for Hobie 20.
Hobie Part# 40210001
https://murrays.com/products/trampoline-wave-white-vinyl-1-piece-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-38970000.jpg?v=1676951820
WAVE 1 PIECE CLASSIC TRAMPOLINE-WHITE
Wave 1Piece Classic Trampoline-White
Murrays Part# 50-38970000
Hobie factory solid white vinyl tramp is heat welded for longevity. This one-piece tramp fits Hobie® Wave Classic SE (not Wave Club).
Which Wave model do you have?
Standard Wave/Classic or SE is car toppable and has a one-piece trampoline. Shrouds and bridles connect with hooks.
Club Wave has a three-piece trampoline and the shrouds and bridles connect with clevis pins.
https://murrays.com/products/trampoline-wings-set-h18sx-h21-black-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-68040255.jpg?v=1676951821
H-18SX/21 TRAMPOLINE WING SET-BLACK
H18SX/21 Trampoline Wing Set-Black
Murrays Part# 50-68040255
Hobie® factory replacement black mesh tramps. Lacing line is not included; order 32 feet of 3/16" line #39-1410BK per side.
https://murrays.com/products/traveler-angle-deck-plate-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61870000.jpg?v=1676951822
H-18 TRAVELER ANGLE DECK PLATE
H18 Traveler Angle Deck Plate
Murrays Part# 50-61870000
Deck plate for Hobie 18 traveler from Hobie Cat.
Hobie Part# 61870000
https://murrays.com/products/traveler-bushing-shaft-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61830000.jpg?v=1676951822
H-18 TRAVELER BUSHING SHAFT
H18 Traveler Bushing Shaft
Murrays Part# 50-61830000
This is a component of an H18 Traveler car. This will fit original Hobie 18 main traveler cars or the new cars that we are producing.
Hobie Part# 61830000
https://murrays.com/products/traveler-ball-bearing-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61850000.jpg?v=1676951824
H-18 TRAVELER BALL BEARING
Traveler Ball Bearing H18 61852000
Murrays Part# 50-61850000
The Traveler Ball Bearing H18 is the stock Hobie 18 Main sheet traveler car ball beaing. This ball can be used in place of cylinder bearing #50-61860000 to bring the traveler back to what came stock on the Hobie 18.
The difference between the traveler ball and the cylinder is that the balls allow the car to move faster but they wear down quicker. Hobie has stopped making the Hobie 18 traveler balls, but Murrays found their source and made more!
https://murrays.com/products/traveler-car-assembly-h18-complete
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/IMG_4599.jpg?v=1707772864
H-18 TRAVELER CAR ASSEMBLY
Hobie 18 main sheet traveler car assembly - Hobie part number 61800001 - Murrays.com
https://murrays.com/products/traveler-cylinder-bearing-h18-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61852000.jpg?v=1676951827
H-18 TRAVELER CYLINDER BEARING SET
H18 Traveler Cylinder Bearing Set
Murrays Part# 50-61852000
Hobie® factory replacement cylinder bearing set for Hobie® 18 main traveler. Set includes one pair.
https://murrays.com/products/traveler-car-body-sub-assembly-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61842000.jpg?v=1676951826
H-18 TRAVELER CAR SUB ASSEMBLY
H18 Traveler Car Sub Assembly
Murrays Part# 50-61842000
Hobie® factory replacement car body subassembly for Hobie® 18 main traveler.
https://murrays.com/products/traveler-dead-eye-h18-discontinued
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/hobie-dead-eye-traveler-50-61060001.jpg?v=1676951830
H-18 DEAD EYE TRAVLER
H18 Dead Eye Traveler
Murrays Part# 50-61060001
Hobie® factory replacement traveler deadeye for Hobie 18 rear crossbar.
https://murrays.com/products/traveler-sheave-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61890000.jpg?v=1676951830
H-18 TRAVELER SHEAVE
Traveler Sheave H18 - 61890000
Murrays Part# 50-61890000
Hobie factory replacement sheave for Hobie 18 main traveler car.
Hobie Part# 61890000
https://murrays.com/products/traveler-spacer-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61880000.jpg?v=1676951830
H-18 TRAVELER SPACER
Traveler Spacer H18
Murrays Part# 50-61880000
Hobie® factory replacement spacer for Hobie® 18 main traveler car.
https://murrays.com/products/traveler-swivel-cam-plate-getaway-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/37760041.jpg?v=1679424780
H-20 & GETAWAY SWIVEL TRAVEL CAM PLATE
H20 & Getaway Swivel Travel Cam Plate
Murrays Part# 50-37760041
Hobie® factory replacement swivel cam plate for Getaway. This bent plate is also used on the Hobie® 20 to convert mainsheet traveler control to Hobie® 16/18 style with control cleat (360-degree swivel cam) on main rear beam instead of on mainsheet traveler car. This is your answer to preventing the traveler from coming toward you when you're trying to pull in the mainsheet on your Hobie® 20.
https://murrays.com/products/tuff-bladder-le-32
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/61-6232.jpg?v=1676951833
TUFF LE BLADDER 32'
https://murrays.com/products/tuff-strut-0-1mm-bladders
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Tuff-Bladders-FixMyKite-Strut-Blank-60in-1524cm-261999392161_a07478b5-5e1e-4ec6-88c7-377b4ade0391.gif?v=1741473214
TUFF STRUT BLADDERS-40"
https://murrays.com/products/universal-kite-pigtail-each
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/54-4408-11_0cce48f8-5a1f-4c14-a4ef-a08e7f191766.jpg?v=1741123880
UNIVERSAL PIGTAIL-GRAY
https://murrays.com/products/upper-pintle-570-580
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1007.jpg?v=1676951836
NACRA UPPER PINTLE 570/580
Nacra Upper Pintle 570/580
Murrays Part# 56-1007
Upper pintle for Nacra 570 and 580 is Nacra Sailing factory item #30005.
https://murrays.com/products/v-jam-boom-cleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10261000-1.jpg?v=1676951837
V JAM CLEAT BOOM (3/16" HOLES)
https://murrays.com/products/velocitek-prostart
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/49-0050.png?v=1676951839
VELOCITEK PRO START
https://murrays.com/products/velocitek-prostart-mounting-bracket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/49-0050-1-400x400.png?v=1738786142
VELOCITEK PROSTART MOUNTING BRACKET
Velocitek Prostart Mounting Bracket
Murrays Part# 49-0050-1
Velocitek's ProStart mounting bracket is compatible with almost all sportboat and dinghy masts that have a bolt rope track. The bracket comes packaged with a hex key, a strip-resistant stainless steel slug and all the screws, nuts and washers required to attach the ProStart to the bracket and the bracket to your mast. The design of the bracket provides space for lines to pass behind the ProStart.
https://murrays.com/products/velocitek-spare-mounting-cradle-for-speedpuck
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/49-0051-1-1.jpg?v=1676951842
VELOCITEK SPARE MOUNTING CRADLE FOR SPEED PUCK
Velocitek Spare Mounting Cradle for Speed Puck
Murrays Part# 49-0051-1
Velocitek's snap-in mounting cradle for the Speed Puck allows use with the ProStart mast bracket or any Tacktick Micro Compass bracket.
The mounting cradle is included with new Velocitek Speed pucks and is also available separately.
https://murrays.com/products/velocitek-speedpuck
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/speedpuck.jpg?v=1676951843
VELOCITEK SPEEDPUCK
https://murrays.com/products/vertical-pole-tang-p19mx
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1045.jpg?v=1676951844
NACRA VERTICAL POLE TANG
Vertical Pole Tang
Murrays Part# 56-1045
The vertical pole tang is part of the Prindle 19MX Conversion Kit. Performance Sports factory item #1045 is limited to stock on hand.
https://murrays.com/products/v-jam-cleat-1-4-holes
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-7008.jpg?v=1742335821
NACRA V-JAM CLEAT (1/4" HOLES)
https://murrays.com/products/washer-3-8-x-3-4-nylon-for-07-1953
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8080691.jpg?v=1676951852
WASHER NYLON 3/8 X 3/4"
Washer 3/8 X 3/4 Nylon for 07-1953
Murrays Part# 50-8080691
Washer for tiller arm bolt #50-8040171. Hobie® factory item
https://murrays.com/products/washer-5-16-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8080681.jpg?v=1676951850
WASHER NYLON 5/16"
Washer Nylon 5/16"
Murrays Part# 50-8080681
Washer for tiller connector rod #50-40530001. Hobie® factory item.
Hobie Part# 8080681
https://murrays.com/products/washer-3-8-lock
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8080581.jpg?v=1676951850
WASHER LOCK 3/8"
Hobie 8080581 Hobie factory replacement 3/8" lock washer is used on Hobie 18 front and rear inboard support castings.
https://murrays.com/products/washer-5-8-x-1-5-16-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8080711.jpg?v=1676951854
WASHER SS 5/8 X 1-5/16"
Washer Stainless Steel 5/8 X 1-5/16"
Murrays Part# 50-8080711
Hobie® factory replacement stainless steel 5/8" x 1-5/16" washer. This is the dolphin striker washer on Hobie 20 Miracle and is also used on the Hobie Getaway mast step system.
Hobie Part# 8080711
https://murrays.com/products/washer-flat-1-2-x-7-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8080601.jpg?v=1676951854
WASHER FLAT 1/2 X 7/8"
Washer Flat 1/2 X 7/8
Murrays Part# 50-8080601
Hobie® factory replacement 1/2" x 7/8" washer.
Hobie Part# 8080601
https://murrays.com/products/wave-backrest-seat-kit-blue-pair
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/washer-flat-5-8-x-9-32
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8080521.jpg?v=1676951858
WASHER FLAT 1/4 X 5/8"
Washer Flat 1/4 x 5/8"
Murrays Part# 50-8080521
Hobie® factory replacement 5/8" x 9/32" flat washer is used on Hobie 18 mast step assembly.
Hobie Part# 8080521
https://murrays.com/products/wave-comptip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38582100_4_z166.jpg?v=1726076459
WAVE COMPTIP
Wave Comp Tip
Murrays Part# 50-38582100
Hobie® factory replacement CompTip for Wave. A CompTip is the upper section of a Hobie mast. Fiberglass and non-conductive, it was designed to prevent electrocution by contact with a high power line.
https://murrays.com/products/wave-batten-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/370160012z162__96589.jpg?v=1739810532
WAVE BATTEN SET
Wave Batten Set
Murrays Part# 50-38016001
Complete batten set for the Hobie Wave sailboat. Includes battens 1-5 in the correct lengths for your Wave mainsail.
https://murrays.com/products/wave-end-cap-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie-wave-rear-end-cap-38190021.jpg?v=1676951859
WAVE AFT END CAP-BLACK
Wave Aft End Cap-Black
Murrays Part# 50-38190021
Replacement end cap for Hobie Wave rear cross bar. Works on the rear crossbar only.
Single cross bar cap
Works on rear crossbar of Hobie Wave
Hobie Part# 38190021
https://murrays.com/products/wave-bridle-with-hook
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-38822011.jpg?v=1719505879
WAVE BRIDLE WITH HOOK 1/8"
Wave Bridle with Hook 1/8" Discontinued by Hobie
This item is not longer available from Hobie
Hobie Part# 38822011
https://murrays.com/products/wave-keeper-pin-with-lanyard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/38490011.jpg?v=1679510671
WAVE KEEPER PIN WITH LANYARD
Hobie Wave Keeper Pin With Lanyard
Murrays Part# 50-38490011
Hobie® factory replacement keeper wire with pin for Wave and Getaway.
Hobie part# 38490011
https://murrays.com/products/wave-mast-base-new-for-serial-number-1438-up
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38641001z103.jpg?v=1726087750
WAVE MAST BASE new S/N 1438 UP
https://murrays.com/products/wave-mast-assembly-2-piece-for-serial-number-1438-up
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie-Wave-Lower-Mast-38583141__56414__94611.jpg?v=1742334227
WAVE MAST ASSEMBLY (2 PIECE)
https://murrays.com/products/wave-lower-mast
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie-Wave-Lower-Mast-38583141__56414__94611-248x300.jpg?v=1726076764
WAVE LOWER MAST
https://murrays.com/products/wave-mast-step-for-serial-number-1438-up
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38171001z103__45028.jpg?v=1742333853
WAVE MAST STEP CASTING
Wave Mast Step Casting
Murrays Part# 50-38171001
Mast step casting for the Hobie Wave catamaran. Standard on all Waves on stock on new production boats. The previous version used the H14 style cup instead.
Hobie Part# 38171001
https://murrays.com/products/wave-shroud-with-hook
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/hobie-wave-se-classic-shroud-38790001__12262.jpg?v=1732145710
WAVE SHROUD WITH HOOK
Wave Shroud with Hook
Murrays Part# 50-38790001
Hobie® factory replacement shroud with hook for Wave.
https://murrays.com/products/wave-pintle-lower
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-38101401-1.jpg?v=1676951864
WAVE WAVE/GETAWAY LOWER PINTLE - PRE EZ LOC
Hobie Wave Lower Pintle
Murrays Part# 50-38101401
Hobie® factory replacement lower pintle for Wave or Bravo or Getaway Pre-EZ Loc Rudder Systems. Lower pintle assembly for Hobie Wave sailboat.
Original Equipment on all Hobie Wave sailboats.
Lower pintle should be mounted with four (4) screws.
Use Part # 8030171 for boats 2008 and older, or Part # 8030331 for 2009 and newer.
Hobie Cat Part # 38101401
https://murrays.com/products/wave-spreader-tang
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38120041_hobie_wave_bow_spreader_tang.jpg?v=1717440664
WAVE BOW SPEADER TANG
Hobie Wave Bow Spreader Tang
Murrays Part# 50-38120041
Replacement tang for Hobie Wave bow spreader.
Hobie Part# 38120041
https://murrays.com/products/wave-tiller-crossbar-assembly-07-ez-loc
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39524001_1_z163.jpg?v=1726095857
WAVE EASY LOC TILLER CROSS BAR
HOBIE WAVE EZ LOC TILLER CROSS BAR
Murrays PN 50-39524001
Hobie® factory replacement tiller crossbar assembly for Wave with EZ Loc rudder system.
Hobie part number 39524001
https://murrays.com/products/wave-stud-for-mast-step
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-38170001.jpg?v=1723070597
WAVE MAST STEP POST (THREADED)
Hobie Wave Mast Step Post (Threaded)
Murrays Part# 50-38170001
This part is used on the Hobie Wave to connect the mast ball to the mast step casting on the front crossbar. The older waves utilize an H14 mast step casting.
Hobie Part# 38170001
https://murrays.com/products/west-system-hardener-7oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-4103-2.jpg?v=1676951870
WEST SYSTEM 205 FAST HARDENER 7OZ
West System 205 Fast Hardener
Murrays Part# 40-4103
West System 205 Fast Hardener® is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with West System 105 Resin (#40-4103) in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating
https://murrays.com/products/west-system-plastic-boat-repair-kit-g-flex
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-6508-1.jpg?v=1676951870
WEST SYSTEM PLASTIC BOAT REPAIR KIT WITH G/FLEX
West System Plastic Boat Repair Kit with G/Flex
Murrays Part# 40-6508
West System Plastic Boat Repair Kit G/Flex repairs plastic canoes, kayaks and inflatables made from HDPE, LDPE, ABS, PVC or polycarbonate plastic with the contents of this West System kit. The Plastic Boat Repair Kit features plastic-friendly G/flex 655 epoxy, and is assembled with the do-it-yourselfer in mind.
https://murrays.com/products/west-system-epoxy-resin-quart
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-4103-1-1.jpg?v=1676951870
WEST SYSTEM 105 EPOXY RESIN 1 QUART
West System Epoxy Resin 1 Quart
Murrays Part# 40-4103-1
West System 105 Epoxy Resin is the key component in a wide variety of boatbuilding, restoration, and repair projects. It is the base material of the West System family of products on which all of the West System compounds are built.
https://murrays.com/products/west-system-repair-pack-handy-small
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-4101-1_658f052a-6e55-499e-b1d7-4e1b78caa155.jpg?v=1676951871
WEST SYSTEM SMALL REPAIR KIT
West System Small Repair Kit
Murrays Part# 40-4101
This West System Handy Repair Pack contains everything you need to complete small repairs around the boat, shop or home, and is perfect for ding repairs. The kit contains two West System 105 Resin/205 Hardener packets, and enough high-density filler to complete a variety of coating and bonding operations.
https://murrays.com/products/whipping-twine-spool-white-10
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Whipping-twine.jpg?v=1715124741
WHIPPING TWINE - WHITE SPOOL
Robline waxed whipping twine
https://murrays.com/products/west-systems-epoxy-qt-w-hardener
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-4103-1-2.jpg?v=1676951874
WEST SYSTEMS EPOXY WITH HARDENER
West Systems Epoxy 1 Quart with Hardener
Murrays Part# 40-4103
The West Systems Epoxy QT w/ Hardener is a combination of 105 Epoxy Resin and 205 Hardener. It is used for shops and/or bigger jobs and lamination work. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin that cures to a hard, solid plastic with superior physical properties. The optional mini pumps (#40-4104) screw onto the resin and hardener to make dispensing and 5:1 metering easy and automatic.
https://murrays.com/products/west-system-repair-pack-maxi
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-4102.jpg?v=1676951874
WEST SYSTEM MAXI EPOXY REPAIR PACK
West System Maxi Epoxy Repair Pack
Murrays Part# 40-4102
Use the West System Maxi Epoxy Repair Pack for dings and delamination repair. It gives you three times as much resin as the small kit. The kit contains six 105 Resin/205 Hardener packets, fairing filler, high-density adhesive filler, a 4" x 12" 9 oz fiberglass tape, two application brushes, one syringe, two pipe cleaners, four mixing sticks, one pair of disposable gloves, four cleaning pads, mixing cups and illustrated instructions.
https://murrays.com/products/wing-casting-front-h17-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50663001.jpg?v=1676951877
WING CAST FRONT H17 BK
https://murrays.com/products/wing-cap-h17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50665001.jpg?v=1676951878
H-17 WING CAP (EACH)
https://murrays.com/products/wing-casting-rear-h17-black
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/wing-leg-getaway-assembly
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/37101001.jpg?v=1676951881
GETAWAY WING LEG ASSEMBLY
https://murrays.com/products/wing-end-casting-h18sx-h21
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-65030010.jpg?v=1676951882
H-18SX/21 WING END CASTING
https://murrays.com/products/wing-mount-kit-short-bar
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-65071001.jpg?v=1752013159
WING MOUNT KIT (1 EACH)
WING MOUNT KIT (1 EACH)
Murrays PN 50-65071001
Hardware mounting kit for Hobie 18 Magnum and SX wings.
Includes:
2 x Wing Slug - Threaded post
2 x 5/16 -18 threaded nylock nuts
2 x 5/16 -18 Socket Screw
https://murrays.com/products/wing-set-getaway-with-cover
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37001000.jpg?v=1676951886
GETAWAY WING SET WITH COVER
Getaway Wing Set With Cover
Murrays Part# 50-37001000
These are perfect for lazy day sailing, relaxed hiking out on your Hobie Getaway or for high performance fun. Turquoise vinyl mesh covers aluminum extrusions that are contoured to make a very comfortable back rest or seat. Remove two quick pins per side and they rotate in for trailering.
Hobie Cat Part# 37001000
https://murrays.com/products/wing-strut-tab-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-65100000.jpg?v=1676951886
H-18 WING STRUT TAB
H18 Wing Strut Tab
Murrays Part# 50-65100000
Hobie® factory replacement wing strut tab for Hobie 18.
https://murrays.com/products/wing-tension-leg-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37091001.jpg?v=1676951887
GETAWAY WING TENSION LEG
Getaway Wing Tension Leg
Murrays Part# 50-37091001
Replacement tension leg for Hobie Getaway wing assembly.
Hobie Part# 37091001
https://murrays.com/products/wing-tube-h17-inside
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/wire-stud-1-8-right-hand-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1056.jpg?v=1676950546
WIRE STUD LEFT 1/8" (SS)
https://murrays.com/products/wire-for-wave-se-classic-tramp
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/hobie-wave-trampoline-wire-38970051__52668.jpg?v=1740075597
WAVE TRAMPOLINE TENSION WIRE
Wave Trampoline Tension Wire
Murrays Part# 50-38970051
This is the wire that goes through the side of a Hobie Wave Classic trampoline and hooks into the hooks on the hulls to tension the tramp.
https://murrays.com/products/wire-stud-1-8-left-hand-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1036.jpg?v=1676950425
WIRE STUD RIGHT 1/8" (SS)
3/32 TURNBUCKLE STUD
https://murrays.com/products/xplorer-2-windmeter-w-temp
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/skywatch_xplorer_2-1.jpg?v=1676951894
XPLORER 2 WINDMETER W/ TEMP
https://murrays.com/products/xplorer-1-electronic-windmeter
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/skywatch_xplorer_1-1.jpg?v=1676951895
EXPLORER 1 WINDMETER
https://murrays.com/products/zip-tech-zipper-lubricant
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/38-1925.jpg?v=1676951896
ZIP TECH ZIPPER LUBRICANT
Zip Tech Zipper Lubricant 0.5oz
Murrays Part# 38-1925
Zipper Lubricant for use on dry suits, and other tough zipper applications to ensure zippers operate properly and seal out the elements.
https://murrays.com/products/zipper-9-dry-relief
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/f18-nacra-infusion-mk2-trampoline-black-mesh
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/aft-xbar-support-tube-for-hobie-20-21sc
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-41190001.jpg?v=1676952349
H-20/21SC AFT CROSSBAR SUPPORT TUBE
H20/21SC Aft Crossbar Support Tube
Murrays Part# 50-41190001
Hobie Part # 41150000
https://murrays.com/products/nacra-inter-rear-crossbar-endcap-casting-right-fits-all-inters-inter-18-inter-20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-3525.jpg?v=1676952361
NACRA REAR CROSSBAR CASTING END CAP-RIGHT
Rear Crossbar Casting End Cap-Right
Murrays Part# 56-3525
Nacra Inter Endcap Casting-Right Fits all Inters Inter 18 Inter 20
https://murrays.com/products/nacra-inter-rear-crossbar-endcap-casting-left-fits-all-inters-inter-18-inter-20
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nacra-inter-front-crossbar-endcap-casting-left-fits-inter-18-20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-2526.jpg?v=1676952364
NACRA FRONT CROSSBAR CASTING END CAP-LEFT
Inter Front Crossbar Endcap Casting-Left
Murrays Part# 56-2526
Nacra Inter Front Crossbar Endcap Casting-Left Fits all Inters, Inter 18 Inter 20
https://murrays.com/products/harken-block-40mm-t2-soft-attach-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-2149.jpg?v=1712360356
HARKEN 40MM T2 SOFT-ATTACH BLOCK
The Harken 2149 40mm T2 tie-on block eliminates the need for shackles, posts, swivels, etc. It is ultra-lightweight and sized like a bullet-block.
https://murrays.com/products/harken-block-40mm-t2-soft-attach-loop-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/download-1_4edc790d-5574-442c-93ef-afda2425cb1d.jpg?v=1676952390
HARKEN 40MM T2 LOOP SOFT-ATTACH BLOCK
https://murrays.com/products/harken-block-40mm-t2-soft-attach-ratchet-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/16023459_FUL.jpg?v=1676952391
HARKEN 40MM T2 SOFT-ATTACH RATCHAMATIC BLOCK
Harken 40mm T2 Soft-Attach Ratchamatic Block
Murrays Part# 28-2159
Harken Block 40mm T2 Soft-Attach Ratchet Block for catamarans, this tie-on block eliminates the need for shackles, posts, swivels, etc. It is ultra-lightweight and sized like a bullet-block.
https://murrays.com/products/harken-block-57mm-t2-soft-attach-ratchet-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/16023467_FUL.jpg?v=1676952393
HARKEN 57MM T2 SOFT-ATTACH RATCHAMATIC BLOCK
Harken Block 57mm T2 Soft-Attach Ratchet Block for catamarans, this tie-on block eliminates the need for shackles, posts, swivels, etc. It is ultra-lightweight and sized like a bullet-block.
Specifications:
2-1/4" sheave diameter
500 lb. SWL
2000 lb. breaking strength
3/8" maximum line diameter
Harken Part # 2160
https://murrays.com/products/nacra-17-mki-trampoline-black-mesh-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-60277-02.jpg?v=1742324588
NACRA 17 MKI TRAMPOLINE OEM
https://murrays.com/products/nacra-17-mkii-trampoline-black-mesh-oem
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nacra-trapeze-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/NACRA_Part_30692_Trapeze_block.jpg?v=1736269674
NACRA TRAPEZE BLOCK
NACRA Trapeze Block
Replacement part for the adjustable trapeze system found on modern NACRA catamarans.
NACRA Part # 30692
Applications:
Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS
https://murrays.com/products/nacra-trapeze-stop
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/trapeze_stop.jpg?v=1676952412
NACRA TRAPEZE STOP
Replacement part for the adjustable trapeze system found on modern NACRA catamarans.
Applications:
Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS
NACRA Part # 30938
https://murrays.com/products/harken-eyestrap-padeye-2759
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2759.jpg?v=1676952417
HARKEN 56MM PADEYE - 2 FASTENERS
Harken 56mm Padeye - 2 Fasteners
Murrays Part# 28-2759
This is an upgrade for your harken main traveler car. It is being used on the NACRA 17 Olympic boats to replace the failing eyestrap. It will typically require longer bolts/ screws. This is a heavy duty cast stainless steel padeye.
Fits on Harken Car 2738 and 2756
Harken Part# 2759
https://murrays.com/products/mclube-sailkote-dry-lubricant-8oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/McLube-Sailkote-8oz-e1508438608275.jpg?v=1676952429
MCLUBE SAILKOTE DRY LUBRICANT
McLube Sailkote Dry Lubricant
Murrays Part# 40-0408
McLube Sailkote is the easy-to-apply, high performance dry lubricant that makes sails, hulls, rigging and anything that moves on your boat work more efficiently and last longer. Formulated with Dupont Krytox®, an environmentally-friendly, translucent liquid lubricant, it dries quickly to a hard, ultra-slick, hydrophobic dry coating.
https://murrays.com/products/nacra-580-centerboard
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/sport-locker-back-door-assembly
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/rbs-batten-tensioner-15x7-6mm-webbing-style
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/RBS-Batten-Tensioner.jpg?v=1676952455
RBS WEBBING STYLE BATTEN TENSIONER 15x7.6MM
RBS Batten Tensioner 15x7.6mm
Webbing Style
Murrays Part# 46-0015
These are also referred to as "Rocket Style" adjusters. These will work with our H20 Race batten set and various other RBS or similar batten styles.
Designed to be attached to the sail with a piece of webbing. Fits RBS foam battens and allows the tension to be adjusted with a flat head screw driver.
Both the line and webbing styles are shown in the above picture. The loop style are laying on top of the webbing style.
https://murrays.com/products/twist-shackle-for-hobie-halyard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/606700001z50.jpg?v=1676952457
HOBIE HALYARD TWIST SHACKLE
Hobie Halyard Twist Shackle
Murrays Part# 50-60670000
Classic 3/16 inch stainless steel twist shackle from Hobie Cat.
Hobie Part# 60670000
https://murrays.com/products/halyard-ring-w-loop
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/hobie-halyard-ring-with-loop-61290021.jpg?v=1676952458
HOBIE HALYARD RING WITH LOOP
Hobie Halyard Ring with Loop
Murrays Part# 50-61290021
Stainless steel halyward ring with loop, used on many Hobie Cat sailboats. Recommended for use with Hobie's twisted halyard shackle
Hobie Part# 61290021
https://murrays.com/products/rbs-batten-tensioner-15x7-6mm-loop-style
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/RBS-Batten-Tensioner_7a6860b5-5e4f-4618-bd07-a60fc2ba24e9.jpg?v=1676952462
RBS LOOP STYLE BATTEN TENSIONER 15x7.6MM
Murrays Part# 46-0016
These are also referred to as "Rocket Style" adjusters. These will work with our H20 Race batten set and various other RBS or similar batten styles.
Designed to be attached to the sail with a loop or a piece of line.; Fits RBS foam battens and allows the tension to be adjusted with a flat head screw driver.
Both the line and webbing styles are shown in the above picture; The loop style are laying on top of the webbing style.
https://murrays.com/products/rbs-tensioner-key-tool
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/RBS-batten-tensioner-tool.png?v=1676952462
RBS TENSIONER KEY TOOL
RBS Tensioner Key Tool
Murrays Part# 46-0001
RBS Tensioner Key Tool is a convenient tool for adjusting RBS batten tensioners.
https://murrays.com/products/instant-hull-cleaner-gallon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-1408-Instant-Hull-Cleaner-Gallon.jpg?v=1676952469
INSTANT HULL CLEANER
Star Bright Instant Hull Cleaner Gallon - Formulated extra strong to get the job done.
Simply spray or wipe on. Removes scum, waterline and rust stains from fiberglass, metal and painted surfaces without rubbing. Avoid contact with galvanized metal.
Key Features
Easily removes scum, waterline and rust stains
For use on fiberglass, metal and painted surfaces
Does not contain harmful acids, safe and easy to use
No rubbing or scrubbing
https://murrays.com/products/hobie-h18-custom-color-main-sail
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60991011-Hobie-18-main-sail.jpg?v=1676952471
H-18 CUSTOM COLOR SAIL
H18 Custom Color Sail
Murrays Part# 50-60991991
Choose from available colors to make your own custom sail color scheme. Contact us to find out the current color options and for lead time. All custom color sails are special order from the Hobie factory and will take at least 5 weeks to deliver.
https://murrays.com/products/cleat-adapter-plate-w-hardware-harken
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-5001.jpg?v=1676952475
CLEAT ADAPTER PLATE WITH HARDWARE
Harken Cleat Adapter with Hardware
Murrays Part# 007-50010
Hobie Factory Part 50010
https://murrays.com/products/nacra-dolphin-striker-rod
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30065.jpg?v=1676952478
NACRA DOLPHIN STRIKER ROD
https://murrays.com/products/nacra-15-trapeze-wire-double-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30238-400x400.jpg?v=1743194003
N-15 DOUBLE TRAPEZE WIRE
N15 Double Trapeze Wire
Murrays Part3 56-32210
Nacra15 trapeze wire double, is a double wire for the Nacara15
The trapeze wire double is provided with a t-handle, for easy grip. Good to know, one trapeze wire double is good for one side of the boat. Therefore, when you are looking for a complete set, ordering two pieces is necessary.
https://murrays.com/products/nacra-15-bridle-wire-oem
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/hobie-18-diamond-wire-w-turnbuckle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/61750001.jpg?v=1725902705
H-18 DIMOND WIRE WITH TURNBUCKLE
H18 Diamond Wire with Turnbuckle
Murrays Part# 002-0494-40C
Diamond wire for one side of a Hobie® 18 or 21SC is constructed with 1/8" 1x9 bare wire, stainless fork, jib roller and turnbuckles.
Also used on the the Hobie 21SC is sometimes confused with the H21SE (Special Edition). Please note that the H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rigging.
https://murrays.com/products/open-bic-boom-with-all-hardware
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/bic-boom.jpg?v=1676952517
O'PEN SKIFF BOOM WITH ALL HARDWARE
https://murrays.com/products/spinnaker-nacra-inter-20-2-color
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/bbtalkin-surf-hat-headset-waterproof-v2-0
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/52-2511h-1.jpg?v=1676952534
BBTALKIN' SURF HAT HEADSET-WATERPROOF V2.0
BBTalkin' Surf Hat Headset – Waterproof V2.0
Murrays Part# 52-2511H-1
This waterproof surf hat headset is designed for BBTalkin' Bluetooth waterproof communication devices. This new design allows for replacement of specific components if they become damaged or compromised. You can change out and replace just the speaker or microphone.
https://murrays.com/products/dart-18-shroud-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Murrays_shroud_-_black_b58e3346-b659-4f74-85b8-2abee8b4de10.jpg?v=1729612647
DART-18 SHROUD 5/32 BLACK
H14 Shroud 1/8"
One shroud (sidestay) for Hobie® 14 constructed of 1/8" wire to factory specifications.
Connect at top with #21-0635 1/4" bow shackle; connect to stay adjuster with #22-9802 clevis pin.
Use this page to order product numbers:
02-0104-01 White
02-0104-02 Black
Hobie Cat® Part# 10792100
https://murrays.com/products/rudder-eye-screw-wide-w-bushing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/download_d92167ee-abad-465a-96d1-ca2958e6287b.jpg?v=1676952537
NACRA RUDDER EYE SCREW WIDE WITH BUSHING
Rudder Eye Screw Wide With Bushing
Murrays Part# 56-32055
The screw which is fitted in your lower casting (Until MK2), this screw including the bushing can be adjusted for the rake of the rudder.
https://murrays.com/products/75mm-rachamatic-trip-w-blk-bkt
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22415a7d-9023-489d-901e-d5780b14b95d_large_c159cb07-8714-4c6c-a241-1615510feef2.png?v=1676952541
HARKEN 75MM TRIPLE RATCHAMATIC BLOCK-SWIVEL, BECKET, CAM CLEAT, 57MM BLOCK
Harken 75mm Triple Ratchamatic Block-Swivel, Becket, Cam Cleat, 57mm Block
Murrays Part# 28-2687
The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
https://murrays.com/products/nacra-tiller-tie-bar-end-tendon-assembly
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/download-2_8a722543-a878-431b-8084-1859424398ba.jpg?v=1676952546
NACRA TILLER TIE BAR END TENDON ASSEMBLY
Nacra Tiller Tie Bar End Tendon Assembly
Murrays Part# 56-31567-2
The rubber tiller tiebar connection including string.
This part connects the tillerarm with the tiller crossbar.
https://murrays.com/products/nacra-5-2-diamond-wire-w-tb-and-straight-spreader-first-generation
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-4294-20_cf3cf62a-cc5b-44ea-b401-0030f8b214f6.jpg?v=1676952548
N-5.2 DIAMOND WIRE WITH TURNBUCKLE AND STRAIGHT SPREADER BAR (FIRST GENERATION)
N5.2 Dimond Wire with Turnbuckle and Straight Spreader Bar (First Generation)
Murrays Part# 002-4294-20-1
https://murrays.com/products/capri-16-5-jib-snorkel
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/ronstan-single-cheek-block-series-15-bb
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-15151.webp?v=1718994409
RONSTAN SERIES 15 BALL BEARING CHEEK BLOCK WITH TWO FASTENING HOLES
https://murrays.com/products/screw-1-4-20-x-5-8-phms-p-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/hobie-screw-1-4.20.5-8.8030331.jpg?v=1676952565
SCREW 1/4-20 x 5/8" PHMS-P SS
Screw 1/4-20 x 5/8 PHMS-P Stainless Steel
Murrays Part# 50-8030331
This screw is used on the Hobie wave to secure the eye straps to the inner edge of the crossbars for connecting the tramp pulleys on the classic wave or "other" on the club version.
https://murrays.com/products/harken-6mm-d-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Harken-6mm-D-Shackle.jpg?v=1676952566
HARKEN 6MM "D" SHACKLE
Harken 6mm "D" Shackle
Murrays Part# 28-2108
For use with Harken main sheet blocks.
Forged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. "D" shackles are the most common type of shackle. They are best suited for aligned attachment points.
https://murrays.com/products/nacra-f18inf-double-trapeze-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Black_Double_Trap_073d603b-b284-40c1-920c-f2a295cab58d.jpg?v=1722282838
N-F18INF DOUBLE TRAPEZE (4)
Tiger Double Trapeze (4 handles)
The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.
A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adjustment kit
Sailing Harness
Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased
https://murrays.com/products/nacra-inf-18-race-shroud-bk-5-32
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-4805-22.jpg?v=1676952650
NACRA INFUSION F18 RACE SHROUD 5/32" BLACK WIRE
N15 Shroud 5/32" Race
Murrays Part# 002-4805-22
NACRA 15 Shroud 5/32 (4mm) Race (staymaster) to be used with Staymaster style turnbuckles
https://murrays.com/products/nacra-usa-class-flag-mainsail
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/rudder-bushing-lower-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31723.jpg?v=1676952578
NACRA LOWER RUDDER BUSHING
https://murrays.com/products/nacra-rudder-system-upper-casting-mkii-w-o-arm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-40131-2.jpg?v=1723143255
NACRA UPPER RUDDER CASTING MKII WITHOUT TILLER ARM
https://murrays.com/products/mkii-rudder-system-upper-nf18inf-nf20c-port
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nacra-spring-pin-1-8-x-7-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31389.jpg?v=1676952581
NACRA SPRING PIN
Nacra Spring Pin 1/8 x 7/8
Murrays Part# 56-31389
Spring pin 1/8 x 7/8
https://murrays.com/products/nacra-rudder-roller-uppercasting-1-4-x-15mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31909.jpg?v=1676952582
NACRA RUDDER ROLLER UPPERCASTING
https://murrays.com/products/nacra-pvc-ball-carbon-tiller-extension
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32460.jpg?v=1676952584
NACRA PVC BALL CARBON TILLER EXTENSION
Nacra PVC Ball Carbon Tiller Extension
Murrays Part# 56-32460
https://murrays.com/products/nacra-tiller-tie-bar-extrusion-nf16-nf18inf
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-30137.jpg?v=1741993741
NACRA F16/F18 INFUSION TILLER TIE BAR EXTRUSION
https://murrays.com/products/nacra-rudder-casting-lower-insert-top
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31709.jpg?v=1676952586
NACRA RUDDER CASTING LOWER TOP INSERT
https://murrays.com/products/nacra-rudder-casting-lower-insert-bottom
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31710.jpg?v=1676952586
NACRA RUDDER CASTING LOWER BOTTOM INSERT
https://murrays.com/products/nacra-tiller-connection-joystick-flex
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31652.jpg?v=1676952587
NACRA CONNECTIONPART TILLER/JOYSTICK FLEX
https://murrays.com/products/nacra-rudder-casting-lower-eye-screw-wide
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31706.jpg?v=1676952588
NACRA RUDDER CASTING LOWER EYE SCREW WIDE
Nacra Rudder Casting Lower Eye Screw Wide
Murrays Part# 56-31706
Rudder casting lower eye screw wide
https://murrays.com/products/nacra-rudder-cover
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/nacra-rudder-cover.jpg?v=1676952590
NACRA RUDDER COVER
https://murrays.com/products/nacra-rudder-casting-upper-insert
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31708.jpg?v=1676952590
NACRA UPPER RUDDER CASTING INSERT
https://murrays.com/products/h16-right-front-corner-casting-race
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10162011.jpg?v=1676952603
H-16 CORNER CASTING FRONT RIGHT-RACE
H16 Corner Casting Right Front Race
Murrays Part# 50-10162011
This is an OEM replacement for the current production of Hobie 16 sailboats.
https://murrays.com/products/hobie-drain-plug-screw
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8031731-Hobie-drain-plug-screw.jpg?v=1676952603
HOBIE DRAIN PLUG SCREW
Hobie Drain Plug Screw
Murrays Part# 50-8031731
This screw is used to hold the rudder housing in the back of many of the Hobie Beach cats. H14, H16, H17, H18
Hobie Part# 8031731
https://murrays.com/products/h16-rear-crossbar-w-integrated-track
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25191911.jpg?v=1676952606
H-16 REAR CROSSBAR WITH INTEGRATED TRACK
H16 Rear Crossbar With Integrated Track
Murrays Part# 50-25191911
This is the factory replacement for newer H16 beach cats with integrated traveler car tracks. The integrated track accommodates the larger traveler car and presents a smoother rear beam.
Hobie Part# 25191911
https://murrays.com/products/h14-h16-pylon-foam-plug
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10060000.jpg?v=1676952606
H-14/16 FOAM PLUG FOR PYLON
https://murrays.com/products/fhmsp-10-32x1-1-2-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3503.jpg?v=1676952607
SCREW FHMSP #10-32x1-1/2" SS
Screw FHMSP #10-32x1-1/2" Stainless Steel
Murrays Part# 19-3503
Our FHMSP #10-32x1-1/2 SS is a 316 Stainless Steal Fillips Head Machine Screw Panhead 10-32 diameter and thread and 1.5" in length.
https://murrays.com/products/bolt-3-8-16x4-hx-hd-mst-hv
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8040141-bolt.jpg?v=1676952607
BOLT 3/8-16x4" HX HD MST HV
https://murrays.com/products/h16-masthead-sheave-spacer
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/20614231_1_z49.jpg?v=1726093525
H-16 MASTHEAD SHEAVE SPACER
H16 Masthead Sheave Spacer
Murrays Part# 50-20614231
H16 Masthead Sheave Spacer. This is a replacement bearing surface for the comptip masthead sheaves in H16 mastheads.
Fits Hobie Getaway Masthead Sheaves
Hobie Part# 20644231
https://murrays.com/products/rivet-semi-3-16x27-32-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8012062.jpg?v=1676952610
RIVET SEMI
Rivet Semi 3/16x27/32 Stainless Steal
Murrays Part# 50-8012062
https://murrays.com/products/hobie-comptip-caplug
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8090900.jpg?v=1676952611
COMP-TIP CAP PLUG
Comptip Cap Plug
Murrays Part# 50-8090900
This part is used to seal the hole in the Comptip of a Hobie cat after the expanding foam has been put in.
Hobie Part# 8090900
https://murrays.com/products/solid-rivet-1-8-x-5-16-brass
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/hobie-1-8-x-5-16-brass-sail-rivet-8010020.jpg?v=1676952611
SOLID RIVET-BRASS
Solid Rivet 1/8 x 5/16" Brass
Murrays Part# 19-5004
Solid Rivet 1/8 x 5/16 Brass
Used on sail headboards, clew and tack plates.
Hobie Part# 8010020
https://murrays.com/products/nut-1-4-20-centerlock-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8050121.jpg?v=1676952614
NUT STAINLESS STEEL 1/4-20" CENTERLOCK
Nut Stainless Steel 1/4-20" Centerlock
Murrays Part# 50-8050121
https://murrays.com/products/nacra-snufferbag-race-n17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-31674.jpg?v=1741991353
NACRA 17 SNUFFERBAG RACE
https://murrays.com/products/nacra-compression-pole-base
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31236.jpg?v=1676952618
NACRA COMPRESSION POLE BASE
Nacra Compression Pole Base
Murrays Part# 56-31236
The base on the bowsprit for the compression pole.
https://murrays.com/products/nacra-15-nf16-mkii-masthead
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31852.jpg?v=1676952619
NACRA 15/F16MKII MASTHEAD
https://murrays.com/products/nacra-15-spi-blue-holmenkol-treatment
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60308-03s.jpg?v=1676952620
NACRA 15 NYLON SPINNAKER HOLMENKOL-BLUE
https://murrays.com/products/nacra-15-mast-w-o-blocks
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/32062.jpg?v=1676952621
NACRA 15 MAST WITHOUT BLOCKS
https://murrays.com/products/sail-jib-h20-6oz-dac-wht
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-6030-1_Hyde_Hobie_18_white_jib_200x200_06a37cdf-4d13-49e4-b1e6-6bcf92f1522f.jpg?v=1740501776
H-20 JIB SAIL (WHITE)
H14 Roller Furling Jib Sail (White)
Murrays Part# 30-5012
A roller furling jib adds safety, convenience and performance to your Hobie 14. Reduce sail area while sailing or furl your jib while beached. Dacron sailcloth in your choice of weight and solid colors; 4-oz. cloth offers a greater selection of colors than 6-oz. Viewing window is not included (order #30-5001). Order hardware kit #30-5015 separately.
https://murrays.com/products/gath-chin-strap-wrap-pad
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Gathchinstrapwrap.jpg?v=1758730196
GATH HELMET CHIN STRAP PAD
GATH HELMET CHIN STRAP WRAP PAD
https://murrays.com/products/nacra-15-forestay-4mm-n15
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32206-2.jpg?v=1676952625
N-15 FORESTAY-BARE WIRE
https://murrays.com/products/nacra-15-shroud-4mm-n15
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32231-2.jpg?v=1676952627
N-15 SHROUD-BLACK WIRE
N15 Shroud
Murrays Part# 56-32231-2
Shroud NACRA 15 for staymaster 4mm, is a single shroud for the NACRA 15.
The race shroud is provided with a fitting for the Staymaster. When you are looking for a set of shrouds, ordering two pieces is necessary.
https://murrays.com/products/nacra-n15-daggerboard-port-side
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-32177P.jpg?v=1741983337
NACRA 15 DAGGERBOARD PORT SIDE
https://murrays.com/products/nacra-n15-daggerboard-starboard-side
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-32177S.jpg?v=1741983069
NACRA 15 DAGGERBOARD STARBOARD SIDE
https://murrays.com/products/hobie-tiger-spinnaker-bag-soft
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/hobie-soft-bag.jpg?v=1676952631
TIGER SPINNAKER BAG SOFT
Hobie Tiger Spinnaker Bag Soft
Murrays Part# 50-F99267527
https://murrays.com/products/nacra-tiller-arm-460-500-570
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31271.jpg?v=1676952641
NACRA 460/500/570 TILLER ARM
Nacra Tiller Arm 460 / 500 / 570
Murrays Part# 56-31271
https://murrays.com/products/nacra-bridle-connector
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31698.jpg?v=1676952642
NACRA 15/F16/17/F20C BRIDLE CONNECTOR
https://murrays.com/products/nacra-compression-pole-n15
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31700.jpg?v=1676952642
NACRA 15 COMPRESSION POLE
https://murrays.com/products/nacra-15-spi-pole-spinnaker-pole
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32063.jpg?v=1676952645
NACRA 15 BOWSPRIT
N15 Bowsprit
Murrays Part# 56-32063
Spi pole Nacra 15, is suitable for youth Olympic Nacra 15.
On the critical points of the spi pole, there is an inner tube for extra support.
Supplied with spi pole bridle wires, so the pole is ready to sail.
https://murrays.com/products/nacra-15-spi-pole-bridle-wire
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-32230.jpg?v=1741982278
N-15 BOWSPRIT BRIDLE-BARE WIRE
https://murrays.com/products/nacra-15-mylar-main-white
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60295-01.jpg?v=1676952645
NACRA 15 MYLAR MAINSAIL-WHITE
N15 Mylar Mainsail-White
Murrays Part# 56-60295-01
Nacra 15 mainsail is made with scrim mylar. Sail comes without battens
https://murrays.com/products/nacra-15-batten-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/32205.jpg?v=1676952646
N-15 BATTEN SET
N15 Batten Set
Murrays Part# 56-32205
https://murrays.com/products/nacra-15-jib-mylar-full-batt-white
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60296-01.jpg?v=1676952647
NACRA 15 JIB SAIL-WHITE
N15 Jib Sail-White
Murrays Part# 56-60296-01
Nacra 15 Jib Sail is made with scrim mylar and comes including battens
https://murrays.com/products/nacra-15-jib-batten-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/33498.jpg?v=1676952649
NACRA 15 JIB BATTEN SET
N15 Jib Batten Set
Murrays Part# 56-33498
https://murrays.com/products/nacra-15-shroud-5-32-4mm-race-staymaster
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-4805-22.jpg?v=1676952650
N-15 RACE SHROUD 5/32" BLACK WIRE
N15 Shroud 5/32" Race
Murrays Part# 002-4805-22
NACRA 15 Shroud 5/32 (4mm) Race (staymaster) to be used with Staymaster style turnbuckles
https://murrays.com/products/nacra-15-forestay-5-32-bare-4mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay-F18-Infusion-Bare.jpg?v=1676952650
N-15 FORESTAY 5/32" BARE WIRE
N15 Forestay 5/32" Bare Wire
Murrays Part# 002-4845-10
https://murrays.com/products/nacra-15-shroud-5-32-4mm-standard-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-4805-12.jpg?v=1676952651
N-15 SHROUD 5/32" BLACK WIRE
https://murrays.com/products/nacra-15-diamond-wire-ea
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-4894-20.jpg?v=1676952653
N-15 DIAMOND WIRE
https://murrays.com/products/hobie-18-jib-protector-balls
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/hobie-jib-protector-kit-trentec.jpg?v=1676952659
H-18/21 JIB PROTECTOR BALLS
H18/21 Jib Protector Balls
Murrays Part# 012-0020
Diamond wire spreader balls for the Hobie 18 and 21. They go on your diamond wire spreaders to protect your jib from rubbing against them.
https://murrays.com/products/spihalyard-tapered-nf20c-blue-white
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50014.jpg?v=1676952660
NACRA F20C SPINNAKER TAPERED HALYARD
Nacra Spinnaker Tapered Halyard F20C
Murrays Part# 56-50014
Spihalyard tapered Nacra 20 (blue/white), , has a SSR basics, made by Alpha Ropes. Looking to the construction of the line, it's single braid, 16 strand (8x2), mix Dyneema® Sk78 / Cordura®. This line is not ready for kinking and is excellent for sheets. A advantage of this line, its soft while kept in your hands.
https://murrays.com/products/nacra-nf20c-compression-pole-2014-and-up
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-32485_a13e275c-f41e-492c-9269-2a7b3e47188d.jpg?v=1741981690
NACRA F20C COMPRESSION POLE (2014 & UP)
https://murrays.com/products/nacra-15-mast-cover
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/mast-cover-nacra-15.jpg?v=1676952663
N-15 MAST COVER
https://murrays.com/products/stainless-steal-ring-3x20mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-30702.jpg?v=1676952662
NACRA RING
Nacra Ring
Murrays Part# 56-30702
Details: 3x20mm Stainless Steel
https://murrays.com/products/shroud-eye-3-8unc-17-4-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31964.jpg?v=1676952663
NACRA SHROUD EYE
https://murrays.com/products/shroud-eye-3-8unc-17-4-ss-nf20c
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32102.jpg?v=1676952664
NACRA SHROUD EYE
Nacra Shroud Eye
Murrays Part# 56-32102
Details: 3/8UNC 17-4 SS nf20c
https://murrays.com/products/boom-endcap-40mm-x-2mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31166.jpg?v=1676952666
NACRA BOOM ENDCAP
Nacra Boom Endcap
Murrays Part# 56-31166
The boom endcap 40mm x 2mm, this is the round endcap used on all standard boom (non decksweeper).
https://murrays.com/products/7-16unc-17-4-ss-shroud-eye
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32338.jpg?v=1676952683
NACRA SHROUD EYE
Nacra Shroud Eye
Murrays Part# 56-32338
Details: 7/16UNC 17-4 SS
Replacement shroud eye for Nacra beachcats.
https://murrays.com/products/13-cam-plate-3in-ss-trpl
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-HCP130.jpg?v=1696532060
HARKEN #13 CAM PLATE 3" SS TRPL
#13#Cam Plate 3in Stainless Steel TRPL
Murrays Part# 28-HCP130
This is the cam plate for a harken block assembly to mount your cam cleat on a triple block.
https://murrays.com/products/16-mm-forkhead-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/16mmFORKHEADBLOCKSO.jpg?v=1712184836
HARKEN 16mm FORK HEAD BLOCK
Harken16mm Forkhead Block
Murrays Part# 28-0376
16 mm Forkhead Block is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb. (113 kg) maximum working load.
Harken part # 376
https://murrays.com/products/29mm-fly-block-single
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2171.jpg?v=1676952771
HARKEN 29MM FLY BLOCK
Harken 29mm Fly Block
Murrays Part# 28-2171
These blocks are the standard upgrade for F18 and other Spinnaker Beachcats that have suffered from halyard block failure.
The 29mm Fly Block Single- Harken soft-attach Fly blocks are designed to provide strength without mass, providing sailors with big power in a low-aero package. Designed specifically for high-tech line, these efficient blocks have an incredible working load for their small size.
https://murrays.com/products/airush-flagging-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/airush-flagging-bungee-line.jpg?v=1676952820
AIRUSH FLAGGING LINE
https://murrays.com/products/bbt-boom-microphone-cover-set-of-5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/52-2530.png?v=1676952831
BBTALKIN' BOOM MICROPHONE COVER (5)
BBTalkin' Boom Microphone Cover
Murrays Part# 52-2530
The BBT Boom Microphone Cover (Set of 5) replacement foam cover. Includes foam cover and Velcro fastener which is compatible with the BbTALKIN USA head accessories.
https://murrays.com/products/bbtalkin-baseball-cap-headset-v2-0
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/B01CR-780x800.jpg?v=1676952834
BBTALKIN' BASEBALL CAP HEADSET V2.0
BBTalkin' Baseball Cap Headset V2.0
Murrays Part# 52-2511C
BBTalkin' baseball cap with ear covers.
https://murrays.com/products/blk-1-50in-wire-thru-deck
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0306_2790b3b3-541e-43d2-85ee-bd51e815bdec.jpg?v=1676952838
HARKEN 38MM WIRE THOUGH-DECK
Harken 38mm Wire Through-Deck
Murrays 28-0306
Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes.
Harken Part# 306
https://murrays.com/products/bolt-3-8-16-x-3-1-2-hx-hd
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8040361.jpg?v=1676952842
BOLT 3/8-16 x 3-1/2" HX HD
Bolt 3/8-16 x 3-1/2" HX HD
50-8040361
Pylon bolt used on Hobie 16 Sailboats from 1994 to present.
Hobie Part# 8040361
https://murrays.com/products/bolt-pan-head-1-4-x-1-2-unc-for-u-bracket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31464.jpg?v=1676952842
NACRA U-BRACKET BOLT
Nacra U-Bracket Bolt
Murrays Part# 56-31464
Bolt pan head 1/4 x 1/2" UNC for boom U-bracket. Bolt is also used for Wingseat frame connection
https://murrays.com/products/bolt-5-16-18-x-2-1-2-hx-hd
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8040321.jpg?v=1676952842
BOLT 5/16-18 x 2-1/2" HX HD
Bolt 5/16-18 x 2-1/2" HX HD
Murrays Part# 50-8040321
EZ Loc Lower Rudder Bolt for Hobie Bravo, Getaway and Wave.
Hobie Part# 8040321
https://murrays.com/products/bolt-5-16-18-x-2-3-4-hx-hd
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8040391.jpg?v=1676952845
BOLT 5/16-18 x 2-3/4" HX HD
Bolt 5/16-18 x 2-3/4" HX HD
Murrays Part# 50-8040391
EZ Loc upper rudder bolt for Hobie Bravo, Getaway and Wave
Hobie Part# 8040391
https://murrays.com/products/boom-u-bracket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31063.jpg?v=1676952846
NACRA BOOM U-BRACKET
Nacra Boom U-Bracket
Murrays Part# 56-31063
The U-bracket which is on the gooseneck, this part is used to connect the boom to the mast.
https://murrays.com/products/bow-spreader-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/37500001.jpg?v=1676952846
GETAWAY BOW SPREADER
Getaway Bow Spreader
Murrays Part# 50-37500001
Bow spreader for the Hobie Getaway. Compatible with all Getaway model years up to and including 2016. For 2017 and newer boats, order 37501701.
Black anodized aluminum finish
For Getaway model years up to and including 2016
https://murrays.com/products/boom-carbon-nacra-f20c
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31150.jpg?v=1676952848
NACRA F20C BOOM CARBON
https://murrays.com/products/bravo-ez-loc-rudder-assy
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/90312000.jpg?v=1676952849
BRAVO EZ LOC RUDDER ASSEMBLY
https://murrays.com/products/bracket-mainsheet-attach
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/90700201.jpg?v=1676952850
BRAVO MAINSHEET BRACKET
Attach Mainsheet Bracket
Murrays Part# 50-90700201
Mainsheet bracket replacement for Hobie Bravo.
Hobie Part# 90700201
https://murrays.com/products/clevis-pin-1-4x3-8-so
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/8020371z103.jpg?v=1725554625
CLEVIS PIN 1/4 x 3/8"
Clevis Pin 1/4X3/8
Murrays Part# 50-8020371
This is commonly used for Hobie Rigging parts. It has a 3/8" grip length. You can also use the 1/2" grip length pins also.
Hobie Part# 8020371 or 8020370
https://murrays.com/products/clam-cleat-cl277
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/cl277.jpg?v=1676952867
NACRA F18 INFUSION CLAM CLEAT CL277
Clam Cleat CL277
Murrays Part# 56-12862
The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Small, neat and lightweight. Advanced tooth technology to hold all types of small rope. Integral becket allows riggging with a 2:1 ratio, without extra parts. Applications include Canoes & Kayaks (seat & rudder lines); Dinghy tiller lines. Manufactured from aluminum for light weight and durable performance.
https://murrays.com/products/dakine-renegade-travelight-harness
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/32-349276.jpg?v=1679681538
DAKINE RENEGADE TRAVELIGHT HARNESS
Dakine Renegade Travelight Harness
Murrays Part# 32-349276
Size: Small
Color: White
Year: 2020/21
Dakine Renegade Travelight Harness
The Dakine Renegade Travelight Harness is new to the Dakine harness line up this year. It is designed as a light weight minimalist harness offering full range of motion, pre-curved back support and able to pack down easily for traveling, and is made of fast drying non water absorbing material.
https://murrays.com/products/dakine-push-button-kite-spreader-bar
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/dakine-PUSH-BUTTON-KITE-SPREADER-BAR.jpg?v=1676953484
DAKINE 10" PUSH BUTTON KITE SPREADER BAR
The Dakine Push Button Kite Spreader Bar comes with an all metal push button system for increased durability and a new asymmetrical webbing attachment bracket that better positions the spreader for less upward rotation. Compatible with all Dakine harnesses. Universal design will work with most any harness brand, year and style.
· Kite specific easy hammer head spreader hook
· Push button easy connect and disconnect
· Strong stainless steel retention button
· Freedom shape spreader bar pad
https://murrays.com/products/dakine-nitrous-shorts-harness
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/NITROUSHDHARNESS-BLACK-610934349337.jpg?v=1676953487
DAKINE NITROUS SHORTS HARNESS
The Dakine Nitrous Shorts Harness also known as the Dakine Nitrous Shorts are Dakine's most minimalist seat harness draped in board shorts. The Nitrous Shorts offer a very low spreader hook height and unhindered range of motion.
The Nitrous shorts are one of Dakine’s lightest and most compact harnesses, they offer great freedom of movement with minimal padding that is only located where needed. Nitrous shorts are ideal for people with short arms, back pain, from foiling to kitesurfing.
https://murrays.com/products/dakine-push-button-windsurf-spreader-bar
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DAKINE-PUSH-BUTTON-WINDSURF-SPREADER-BAR.gif?v=1676953479
DAKINE 10" PUSH BUTTON WIND SPREADER BAR
Dakine Push Button Wind Spreader Bar
Murrays Part# 32-368505
Size: 10" Best fits M and L harnesses
Color: Black
The Dakine Push Button Windsurf Spreader Bar comes with a metal push button system for increased durability and a new asymmetrical webbing attachment bracket that better positions the spreader for less upward rotation. Compatible with all Dakine harnesses. Universal design will work with most any harness brand, year and style.
https://murrays.com/products/dart-18-trampoline-blk-mesh
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3103.jpg?v=1718808590
DART 18 MESH TRAMPOLINE-BLACK
H18 1-Piece Bias Cut Trampoline-Black
Murrays Part# 30-3103-2
This one-piece, bias-cut, black mesh tramp for Hobie® 18 provides a smooth, uncomplicated deck and includes an 11"x12" pocket and adjustable hiking straps. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Two-year warranty on workmanship and materials.
https://murrays.com/products/dart-20-bridles-5-32-blk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Bridle_BK_Thimble-Thimble_double_swaged.jpg?v=1729613871
DART-20 BRIDLES 5/32" BLACK WIRE
Prindle 16 Bridle 1/8"
The Prindle 16 Bridle is a single 1/8" bridle wire for the Prindle 16 catamaran. Constructed to factory specifications. Available in White, Black or Bare wire.
Prindle Part Number 9002 - Prindle wire rigging made by Murrays Marine
https://murrays.com/products/dart-20-bridles-5-32-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Dart20bridlebare.jpg?v=1771520354
DART-20 BRIDLES 5/32" BARE WIRE
https://murrays.com/products/dart-20-shroud-5-32-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie_16_bare_shroud.jpg?v=1732732606
DART-20 SHROUD 5/32" BARE WIRE
The Murrays Hobie 16 Shroud is a stock length bare wire shroud or sidestay for the Hobie 16. 3 lengths available by boat year, order 2 shrouds to get a set. 20792011
https://murrays.com/products/dart-20-forestay-5-32-blk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Dart20forestayblack.jpg?v=1771520282
DART-20 FORESTAY 5/32" BLACK WIRE
Dart 20 Forestay
https://murrays.com/products/dart-20-forestay-rs-bare
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/dart-20-shroud-5-32-blk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Murraysshroud-black.jpg?v=1736970897
DART-20 SHROUD 5/32" BLACK WIRE
Dart 20 shroud wire, side stay
https://murrays.com/products/dart-20-shroud-5-32-rs-blk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/HobieRSshroud.jpg?v=1736976274
DART-20 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
https://murrays.com/products/dart-20-upper-forestay-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Dart_20_upper_forestay.jpg?v=1771520209
DART-20 UPPER FORESTAY BARE WIRE
https://murrays.com/products/davis-pistol-grip-hand-compass
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/hand-compas.jpg?v=1676952914
DAVIS PISTOL- GRIP HAND COMPASS
Davis Pistol-Grip Hand Compass
Murrays Part# 52-108241
This is a device for navigation or race management for lining up a bearing to an object.
https://murrays.com/products/dyneema-scissors
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/RFSCISSORS.jpg?v=1676952922
DYNEEMA SCISSORS
Dyneema Scissors
Murrays Part# 21-RFSCISSORS
These Dyneema Scissors easily cut thru tuff materials like Dyneema and Kevlar and are essential to anyone's repair kit if they work with Dyneema or Kevlar. Ideal for people who are splicing dyneema or spectra line for sailboat rigging or kiteboarding line sets.
https://murrays.com/products/dyneema-whipping-twine-red
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-WD1R.jpg?v=1719429296
SK78 DYNEEMA WHIPPING TWINE
SK78 Dyneema Whipping Twine
Murrays Part# 21-WD1R
Dyneema® whipping twine excels mostly due to its high breaking loads and smooth surface. It is easy to handle and requires no additional waxing.
Specifications:
Material: Dyneema® SK78
Diameter: 1 mm
Length: 50 m
Color: Red
https://murrays.com/products/endfitting-tiller-arm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30001.jpg?v=1676952934
NACRA TILLER ARM ENDFITTING
Nacra Tiller Arm Endfitting
Murrays Part# 56-30001
The endfitting of the tiller arm. This article fits on all Nacra tiller arms. This is a standard item on the rudder system upper.
https://murrays.com/products/endfitting-tiller-crossbar-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30116.jpg?v=1676952934
NACRA TILLER CROSSBAR END FITTING
Nacra Tiller Crossbar End Fitting
Murrays Part# 56-30116
This part inserts into the end of a NACRA tiller X-bar.
https://murrays.com/products/eyestrap-lp-ss-st-2013
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0201.jpg?v=1676952935
HARKEN 38MM LOW-PROFILE STANDARD EYE STRAP
Harken 38mm Low-profile Standard Eyestrap
Murrays Part# 28-0201
The eyestrap low-profile SS (ST-2013)- Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads.
https://murrays.com/products/ez-loc-rudder-housing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50313001_Hobie.jpg?v=1734480510
HOBIE EZ LOC RUDDER HOUSING
Hobie EZ Loc Rudder Housing
50-50313001
EZ Loc Rudder Housing for Hobie Bravo
EZ Loc Rudder Housing for Hobie Getaway
EZ Loc Rudder Housing for Hobie Wave
Hobie part number 50313001
Fits Hobie Wave and Hobie Bravo and Hobie Getaway
https://murrays.com/products/ez-loc-up-lock-pin-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50314001_Hobie_lanyard.jpg?v=1734477495
HOBIE EZ LOC UP LOCK PIN KIT
EZ LOC UP-LOCK PIN KIT
Murrays PN 50-50314001
The EZ LOC UP-LOCK PIN KIT is the pin for locking Hobie Cat EZ Loc rudder system in up position during storage. EZ Loc up-lock pin kit is the pin, screw, split rings and lanyard for securing the EZ Loc rudder in the up position.
Hobie Part Number 50314001
https://murrays.com/products/f18-infusion-ds-main-pentex-blk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60318-05.jpg?v=1676952938
F18 INFUSION DS MAINSAIL PENTEX-BLACK
F18 Infusion DS Mainsail Pentex-Black
Murrays Part# 56-60318-05
https://murrays.com/products/f18-infusion-ds-main-pentex-wht
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60318-01.jpg?v=1676952939
F18 INFUSION DS MAINSAIL PENTEX-WHITE
https://murrays.com/products/f18-infusion-main-pentex-silver
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60280-02-1.jpg?v=1676952942
F18 INFUSION MAINSAIL PENTEX-SLIVER
https://murrays.com/products/f18-infusion-main-pentext-wht
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60280-02.jpg?v=1676952942
F18 INFUSION MAINSAIL PENTEXT-WHITE
https://murrays.com/products/f18-infusion-pentex-jib-white
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60281-01.jpg?v=1676952942
F18 INFUSION PENTEX JIB-WHITE
https://murrays.com/products/f18-infusion-spinnaker-grn-holmenkol
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60283-09s.jpg?v=1676952944
F18 INFUSION SPINNAKER-GREEN
https://murrays.com/products/f18-infusion-pentex-main-blk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60280-05.jpg?v=1676952946
NACRA F18 INFUSION MAINSAIL-BLACK
https://murrays.com/products/f18-infusion-spinnaker-gry
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60282-13.jpg?v=1676952946
NACRA F18 INFUSION SPINNAKER-GRAY
https://murrays.com/products/f18-pentex-jib-blk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60281-05.jpg?v=1676952948
NACRA F18 INFUSION JIB PENTEX-BLACK
https://murrays.com/products/f18inf-line-package-race
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/f-one-big-air-kite-pump
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/F-One-Big-Air-Kite-Pump.png?v=1676952951
F-ONE BIG AIR KITE PUMP 2L
https://murrays.com/products/forward-pro-wip-ear-covers
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/pro-wip-helmet.jpg?v=1676952967
FORWARD PRO-WIP EAR COVERS
Forward Prowip Ear Covers
Murrays Part# 47-2102
2 removable ear protectors
https://murrays.com/products/gasket-rectangular-hatch
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-71707002.jpg?v=1676952996
HOBIE RECTANGULAR HATCH GASKET
https://murrays.com/products/front-crossbar-complete-5-7-used
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/getaway-ez-loc-rudder-assembly
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie-Getaway-EZ-loc-rudder-assembly-37312000.jpg?v=1676952999
HOBIE GETAWAY EZ LOCK RUDDER ASSEMBLY
Hobie Getaway EZ Loc Rudder Assembly
Murrays Part# 50-37312000
Hobie Getaway EZ Loc style rudder assembly complete.
Hobie Part# 37312000
https://murrays.com/products/getaway-wing-pin-lanyard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37661091_Hobie.jpg?v=1734477324
HOBIE GETAWAY WING LEG LANYARD
GETAWAY WING PIN/EZ LOC RUDDER LANYARD
Replacement lanyard for Hobie Getaway Wing Pins and EZ Loc rudder up pin kit.
Hobie part number 50314001
https://murrays.com/products/gooseneck-base-ds-mainsail
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31743DS-600x400-1.jpg?v=1676953003
NACRA GOOSENECK BASE DS MAINSAIL
https://murrays.com/products/h16-kissme-jib-sheet-traveler-upgrade
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Kisme-jib-traveler-system.jpg?v=1676953013
H-16 KISSME JIB SHEET & TRAVELER UPGRADE
H16 Kissme Jib Sheet & Traveler Upgrade
Murrays Part 001-3150
This is a great way to upgrade your vintage Hobie 16 jib sheeting system. This kit includes upgraded traveler cars with carbo blocks for smooth function, and lance cleats to facilitate smooth and accurate jib traveler position control.
*The difference between this kit and the deluxe is the Lance Cleats vs the Cam Cleats. Lance cleats release to the side and were stock on many early model Hobies while the cam cleats release
https://murrays.com/products/h16-left-front-corner-casting
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10152011.jpg?v=1676953018
H-16 CORNER CASTING FRONT LEFT
H16 Left Front Corner Casting
Murrays Part# 50-10152011
Left front corner casting. Fits Hobie 16 boats without integrated tracks and jib traveler control systems. DOES NOT INCLUDE traveler control sheave space.
https://murrays.com/products/h18sx-wing-strut
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-68160001.jpg?v=1676953022
H-18SX WING STRUT
https://murrays.com/products/h20-fwd-outboard-sup-tube
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-41150001.jpg?v=1676953022
H-20 FORWARD OUTBOARD SUP TUBE
H20 Forward Outboard Sup Tube
Murrays Part# 50-41150001
https://murrays.com/products/halyard-hook-swivel-f16-f18inf-f20c
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30952.jpg?v=1676953023
NACRA F16/F18INF/F20C SWIVEL HALYARD HOOK
https://murrays.com/products/harken-51-mm-wire-block-becket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Harken-Becket-38mm.png?v=1676953027
HARKEN 51MM WIRE BLOCK-BECKET
Harken 51mm Wire Block-Becket
Murrays Part# 28-0314
The Harken 51 mm Wire Block - Becket is Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes.
https://murrays.com/products/harken-57mm-carbo-block-with-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Harken-57mm-Carbo-Block-with-Swivel-2600.jpg?v=1676953035
HARKEN 57MM BLOCK-SWIVEL
Harken 57mm Block-Swivel
Murrays Part# 28-2600
The Harken 57mm Carbo Block with Swivel is a low-friction Carbo Air block that is lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. They can be used to replace the single Seaway blocks on a Hobie mainsheet system. Ideal for 8-10m lines, common on many classes of dingy and small catamarans.
https://murrays.com/products/harken-57mm-ratchet-block-with-swivel-and-switch
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Harken-57mm-Ratchet-Block.png?v=1676953036
HARKEN 57MM RATCHET BLOCK-SWIVEL
Harken 57mm Ratchet Block-Swivel
Murrays Part# 28-2135
Harken 57mm Ratchet Block With Swivel and Switch allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. The on/off switch operates from both sides.
Standard grip: medium/light air; 10:1 holding power
https://murrays.com/products/harken-f18-infusion-harken-canvas-yard-cover
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8591.jpg?v=1676953036
HARKEN INFUSION YARD COVER
Harken Infusion Yard Cover
Murrays Part# 28-8591
Both hulls and tramp covered while assembled. Covers sailboat hulls and tramp. area for drainage. Zippers and hook-and-loop for easy installation. Secure to trailer with web straps and buckles. Not meant for travel.
https://murrays.com/products/helmet-speaker-pad-with-microphone
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/52-2512M-1.jpg?v=1676953040
BBTALKIN' HELMET SPEAKER PAD WITH MICROPHONE
Helmet Speaker Pad with Microphone
Murrays Part# 52-2512M-1
The Helmet Speaker Pad with Microphone is a single sided helmet speaker pad with microphone by BbTALKIN USA. This helmet pad is designed to be used with the Advance Unit. You plug the boom microphone’s 3.5mm audio cable directly into your Advance Unit to establish communication. The microphone and speaker piece on the helmet pads are completely waterproof. The design of the helmet pad allows the flexibility to change out either the microphone pie
https://murrays.com/products/hobie-batten-cap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/91011001-bravo.jpg?v=1676953040
BRAVO BATTEN CAP
Hobie Bravo Batten Cap
Murrays Part# 50-9101100
Hobie batten cap for round battens
Sold individually
https://murrays.com/products/hobie-getaway-line-package
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/The_Murrays_Hobie_Getaway_line_package_contrains_all_the_lines_on_a_Hobie_Getaway._nbsp_The_Main_and_Jib_sheets_are_Robline_Neptune_500.jpg?v=1732295201
H-GETAWAY LINE PACKAGE
The Murrays Hobie Getaway line package contrains all the lines on a Hobie Getaway. The Main and Jib sheets are Robline Neptune 500 and the control lines are Pelican VLS, Very Low Stretch.
https://murrays.com/products/hobie-main-traveler-track-retro-fit-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/11810011z103.jpg?v=1676953053
HOBIE MAIN TRAVELER TRACK ACCESS PLATE KIT
Hobie Main Traveler Track Access Plate Kit
Murrays Part# 50-11810011
This kit has been discontinued by Hobie, but the plates are still available, so Murrays is producing the kits with the Hobie plates.
https://murrays.com/products/hobie-miracle-20-compression-sleeve-h20-h21sc
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-31110001.jpg?v=1719943142
H20/21SC COMPRESSION SLEEVE
H20/21 Super Cruiser Compression Sleeve
Murays Part# 50-31110001
This is the sleeve that goes over the dolphin striker inside the front crossbar of the H20.
Hobie part# 31110001
https://murrays.com/products/hobie-tiger-tramp-with-curved-sides-black-mesh
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/trampoline-hobie-tiger-f18.jpg?v=1676953054
TIGER TRAMPOLINE WITH CURVED SIDES-BLACK
https://murrays.com/products/hobie-traveler-tamer
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50014-Hobie-Traveler-Tamer-Kit.jpg?v=1676953057
H-16 TRAVELER TAMER KIT
https://murrays.com/products/hobie-wildcat-rudder-blade-adjustment-screw
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/F18762186-Hobie-Wildcat-Rudder-Adjustment-Screw.jpg?v=1676953058
HOBIE WILDCAT RUDDER BLADE ADJUSTMENT SCREW
Hobie Wildcat Rudder Blade
Adjustment Screw
Murrays Part# 50-18762186
Hobie Wildcat Rudder Blade Adjustment Screw
Hobie part# 18762186
https://murrays.com/products/line-cutter-for-torqueedo-503-1003
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/linkage-ez-loc-rdr-housing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50313201.jpg?v=1676953068
HOBIE EZ LOC RUDDER LINKAGE
Hobie EZ Loc Rudder Linkage
Murrays Part# 50-50313201
Replacement rudder linkage for Hobie EZ Loc style rudder assemblies.
Hobie Bravo, Getaway and Wave
Hobie Part# 50313201
https://murrays.com/products/m4-nylock-nut
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31541.jpg?v=1676953068
M4 NYLOCK NUT
M4 Nylock Nut
Murrays Part# 56-31541
https://murrays.com/products/m4x-16mm-ph-countersunk-bolt
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/m8-x-35mm-torx-bolt-countersunk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/32400.jpg?v=1676953072
M8 x 35mm TORX COUNTERSUNK BOLT
https://murrays.com/products/m8-x-40mm-allen-head-hydrofoil-bolt
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/55-0017.jpg?v=1708028517
M8x40MM SS FLAT HEAD BOLT
M8x40mm SS Counter Sunk Phillips Head Bolt
https://murrays.com/products/mast-base-nacra-f20c
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/mast-base-complete-nacra-f20c
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-40112.jpg?v=1676953077
NACRA F20C MAST BASE COMPLETE
https://murrays.com/products/mast-base-rotatorplate-nacra-f20c
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31209.jpg?v=1676953077
NACRA F20C MAST BASE ROTATORPLATE
Nacra F20C Mast Base Rotatorplate
Murrays Part# 56-31209
Mast base rotatorplate for the Nacra F20 Carbon.
https://murrays.com/products/mast-head-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/376010011z50.jpg?v=1676953081
GETAWAY MASTHEAD ASSEMBLY
https://murrays.com/products/mast-head-h14-comptip-wave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10602111.jpg?v=1676953081
H-14 AND WAVE COMPTIP MASTHEAD
H14 and Wave Comptip Masthead
Murrays Part# 50-10602111
This is a replacement masthead for a Hobie 14 or Hobie Wave.
https://murrays.com/products/mast-glue-kit-comp-tip-bond
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8000432.jpg?v=1676953084
MAST GLUE KIT-COMP TIP BOND
Mast Glue Kit-Comp Tip Bond
Murrays Part# 50-8000432
Hobie Factory epoxy kit for installing a comp tip.
https://murrays.com/products/micro-cam-matic-harken-w-wire-fairlead
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31470.jpg?v=1676953084
HARKEN MICRO CAM-MATIC WITH WIRE FAIRLEAD
Harken Micro Cam-Matic with Wire Fairlead
Murrays Part# 56-31470
Nacra Part# 31470
https://murrays.com/products/mount-kit-mama-universal
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30120.jpg?v=1676953088
MOUNT KIT FOR UNIVERSAL MAMA BOB
Mount Kit for Universal Mama Bob
Murrays Part# 007-30120
This is the mounting kit that attaches to a Mama Bob mast float for mounting on most boats.
Hobie Part #30120
https://murrays.com/products/nacra-15-main-batten-6
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/32289.jpg?v=1676953096
N-15 MAIN BATTEN #6
N15 Main Batten #6
Murrays Part# 56-32289
https://murrays.com/products/nacra-15-n15-boom
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32058.jpg?v=1676953100
NACRA 15 BOOM
N15 Boom
Murrays Part# 56-32058
Nacra 15 aluminum boom for mainsail
https://murrays.com/products/nacra-4-5-shroud-1-8-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0204-02.jpg?v=1676953102
NACRA 4.5 SHROUD 1/8"
N4.5 Shroud 1/8 BK
Murrays Part# 002-4004-02
Made by Murrays to Nacra factory specs.
https://murrays.com/products/nacra-15-n15-tiller-tie-bar-adjustable
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32059.jpg?v=1676953103
NACRA 15 TILLER TIE BAR ADJUSTABLE
https://murrays.com/products/nacra-500-trampoline-black-mesh
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30756.jpg?v=1676953104
NACRA 500 MESH TRAMPOLINE-BLACK
https://murrays.com/products/nacra-bowsprit-endcap-internal-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-30768_6bf03419-d7a0-466a-a979-ad2cf9afcacc.jpg?v=1676953105
NACRA ENDCAP BOWSPRIT INTERNAL SYSTEM
Endcap Bowsprit Internal System
Murrays Part# 56-30786
This endcap is used on the Nacras with the internal tackline system of the spinnaker.
https://murrays.com/products/nacra-bridle-bow-eye
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-30036.jpg?v=1676953106
NACRA BRIDLE BOW EYE
Nacra Bridle Bow Eye
Murrays Part# 56-30036
https://murrays.com/products/nacra-bushing-ferruled-5mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31388.jpg?v=1676953106
NACRA BUSHING FAIRLEAD 5MM
https://murrays.com/products/nacra-c-foil-bearing-deck-fixed-n15
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32234.jpg?v=1676953108
NACRA 15 C-FOIL BEARING DECK FIXED
N15 C-Foil Bearing Deck Fixed
Daggerboard Bearing
Nacra part number 32234
https://murrays.com/products/nacra-daggerboard-rubber-holder
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30014.jpg?v=1676953109
NACRA DAGGERBOARD RUBBER HOLDER
Nacra Daggerboard Rubber Holder
Murrays Part# 56-30014
Replacement dagger board rubber holder for NACRA boats with a dagger board.
Specs: 3/4 x 2"
Nacra Part# 30014
https://murrays.com/products/nacra-f18-bridle-5-32-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_b3152f02-563c-41d4-879e-5a4127ec5c53.jpg?v=1676953110
NACRA F18 BRIDLE 5/32" BLACK WIRE
H21 Special Edition Bridle 5/32" Wire
Murrays Part# 002-0515-22
One bridle for Hobie® 21SE (Special Edition) is constructed of 5/32" wire to factory specifications.
The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front trampoline.
Use this page to order product numbers:
002-0515-21 White
002-0515-22 Black
https://murrays.com/products/nacra-c-foil-bearing-keel-n15
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32235.jpg?v=1676953110
N-15 C-FOIL BEARING KEEL
N15 C-Foil Bearing Keel
Murrays part# 56-32235
Nacra Part Number 32235
https://murrays.com/products/nacra-f18inf-mkii-daggerboard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31232.jpg?v=1676953112
NACRA F18INF MKII DAGGERBOARD
Nacra F18inf MKII Daggerboard
Murrays Part# 56-31232
https://murrays.com/products/nacra-f18-shroud-5-32-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-5605-12.jpg?v=1676953114
N-F18 SHROUD 5/32" BLACK WIRE
NF18 Shroud 5/32" Black Wire
Murrays Part# 002-5605-12
https://murrays.com/products/nacra-f20c-full-boat-cover
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-13353_7d72ebf0-835f-4ada-9332-5ac2ef9faca6.jpg?v=1741891392
NACRA F20C FULL BOAT COVER
https://murrays.com/products/nacra-f20c-boom-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Boom-assembly.jpg?v=1676953116
NACRA F20C ALUMINUM BOOM
Nacra F20C Aluminum Boom
Murrays Part# 56-31260
Nacra F20 Carbon aluminum boom for mainsail
Nacra Part# 31260
https://murrays.com/products/nacra-f20c-tiller-crossbar-adjustable-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/download-e1558652606939.jpg?v=1676953116
NACRA F20C ALUMINUM ADJUSTABLE TILLER CROSSBAR
Nacra F20C Aluminum Adjustable Tiller Crossbar
Murrays Part# 56-31152
The adjustable tiller tie bar, when delivered it comes including the rubber euro rods for connecting it with the rudders / tiller arms. In the center of the tiller crossbar, the connection part (U-bracket) will also be mounted (not the flex joint).
https://murrays.com/products/nacra-footstrap-set-with-bolts
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31175.jpg?v=1676953118
NACRA FOOTSTRAP SET WITH BOLTS
Nacra Footstrap Set With Bolts
Murrays Part# 56-31175
This Nacra footstraps can adjust to the size of your foot.
The set comes with 2 footstraps, including the necessary bolts and washer to put them on the boat.
https://murrays.com/products/nacra-f20c-jib-racing-aramid-black-full-batten
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/60256.jpg?v=1676953118
NACRA F20 CARBON JIB RACING ARAMID BLACK FULL BATTEN
Nacra F20 Carbon Jib Racing Aramid Black Full Batten
Murrays Part# 56-60256
https://murrays.com/products/nacra-halyard-hook-swivel-mainsail-n15-f16-mkii-f17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31741.jpg?v=1676953120
NACRA MAINSAIL SWIVEL HALYARD HOOK
Nacra Mainsail Swivel Halyard Hook
Murrays Part# 56-31741
Main halyard hook swivel to be used for the Nacra 15, F16 MKII and Nacra 17.
https://murrays.com/products/nacra-hull-sticker-big-nacra-15
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-40149.jpg?v=1676953120
NACRA 15 BIG HULL STICKER
Nacra 15 Big Hull Sticker
Murrays Part# 56-40149
Nacra 15 logo sticker for hull
Size: 1501 x 237 mm
Clean the surface before attachment.
https://murrays.com/products/nacra-hull-sticker-big-nacra-f18inf
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/f18.jpg?v=1676953121
NACRA BIG F18 INFUSION HULL STICKER
https://murrays.com/products/nacra-jib-car-front-beam
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30332.jpg?v=1676953122
NACRA JIB CAR FRONT BEAM
Nacra Jib Car Front Beam
Murrays Part# 56-30332
Jib car that can be positioned on the front cross bar
https://murrays.com/products/nacra-inter-front-crossbar-endcap-casting-right
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-2525.jpg?v=1676953124
NACRA INTER FRONT RIGHT CROSSBAR ENDCAP CASTING
Nacra Inter Front Right Crossbar Endcap Casting
Murrays Part# 56-2525
https://murrays.com/products/nacra-logo-nacra-small
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10964.jpg?v=1676953124
NACRA SMALL LOGO STICKER
https://murrays.com/products/nacra-logo-stern-nacra-15-decal
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-40150.jpg?v=1676953125
NACRA 15 LOGO STERN STICKER
N15 Logo Stern Sicker
Murrays Part# 56-40150
Nacra 15 logo sticker for stern.
Size: 350 x 53 mm
Clean the surface before attachment.
https://murrays.com/products/nacra-logo-stern-nacra-f18inf
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40158.jpg?v=1676953125
NACRA F18 INFUSION STERN STICKER (1 HULL)
Nacra F18 Infusion Stern Sticker (1 Hull)
Murrays Part# 56-40158
Nacra F18 Infusion logo sticker for stern
Size: 350 x 53 mm
Clean the surface before attachment
https://murrays.com/products/nacra-main-halyard-hook-swivel-mkii-for-f18inf-and-n20c
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31819-NACRA-Main-Halyard-Hook-MKII-for-F18inf-and-N20C.png?v=1676953128
NACRA MAIN HALYARD HOOK SWIVEL
https://murrays.com/products/nacra-lower-eye-screw-bushing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/shot-6.jpg?v=1676953128
NACRA LOWER EYE SCREW BUSHING
https://murrays.com/products/nacra-main-halyard-ring-w-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30312.jpg?v=1676953130
NACRA MAIN HALYARD RING WITH SHACKLE
Nacra Main Halyard Ring with Shackle
Murrays Part# 56-30312
This shackle connects your Mainsail on your mast, it's knotted on your main halyard.
It takes your Mainsail through the slot of your mast to the top where it connects with the Mainsail hook.
https://murrays.com/products/nacra-mainsail-feeder
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31735.jpg?v=1676953129
NACRA MAINSAIL FEEDER
https://murrays.com/products/nacra-mast-hound-n15-f16mkii-n17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31691.jpg?v=1676953132
NACRA MAST HOUND
https://murrays.com/products/nacra-mast-base-n15-f16mkii-n17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31737-2.jpg?v=1676953132
NACRA 17 MAST BASE
N17 Mast Base
Murrays Part# 56-31737-2
https://murrays.com/products/nacra-masthead-sheave-n460-5-0-5-2-5-7
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-30160.jpg?v=1676953133
NACRA MASTHEAD SHEAVE
NACRA Masthead Sheave 460/ 5.0/ 5.2/ 5.7 - 30160
Replacement mast head sheave for a Nacra 460, 5.0, 5.2 and 5.7.
Nacra part number 30160
https://murrays.com/products/nacra-progrip-set-black-grey-nacra-f18inf-2018-and-up
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-32186-3.jpg?v=1741881339
NACRA F18INF PROGRIP SET BLACK/GRAY (2018 & UP)
https://murrays.com/products/nacra-progrip-set-grey-diamond-n15
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32324.jpg?v=1676953136
NACRA 15 GRAY DIAMOND PRO-GRIP SET
https://murrays.com/products/nacra-rigbox-kit-diamond-adjuster-n15-f16mkii-n17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-40126.jpg?v=1676953137
NACRA DIAMOND ADJUSTER RIGBOX KIT
https://murrays.com/products/nacra-rudder-gudgeon-upper-countersunk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32077.jpg?v=1676953138
NACRA UPPER COUNTERSUNK RUDDER GUDGEON
Nacra Upper Countersunk Rudder Gudgeon
Murrays Part# 56-32077
The original upper rudder gudgeon with countersunk screw holes. A replacement part for your standard Nacra rudder gudgeons. Does not combine with the new lower rudder systems.
https://murrays.com/products/nacra-shroud-eye-washer
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31394.jpg?v=1676953138
NACRA SHROUD EYE WASHER
Nacra Shroud Eye Washer
Murrays Part# 56-31394
Shroud eye washer compatible with Nacra 15, Nacra F16, Nacra 17, Nacra F18 Infusion, Nacra F20 Carbon
https://murrays.com/products/nacra-spinnaker-bow-eye
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-30046.jpg?v=1676953140
NACRA SPINNAKER BOW EYE
Nacra Spinnaker Bow Eye
Murrays Part# 56-30046
https://murrays.com/products/nacra-spreader-bar-aft-n15
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32440.jpg?v=1676953142
NACRA 15 SPREADER BAR AFT REAR
N15 Spreader Bar Aft Rear
Murrays Part# 56-32440
The NACRA 15 class approved spreader bar for your Nacra 15. This is the aft spreader bar.
https://murrays.com/products/nacra-spreader-bar-fwd-n15
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Nacra-15-forward-spreader-arm-32441.png?v=1676953142
NACRA 15 FWD SPREADER BAR
https://murrays.com/products/nacra-spreader-bar-screw-unc
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-30319.jpg?v=1676953142
NACRA SPREADER BAR SCREW UNC
https://murrays.com/products/nacra-sticker-mast-caution-logo
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31268.jpg?v=1676953144
NACRA MAST CAUTION LOGO STICKER
https://murrays.com/products/naples-sabot-line-race-package
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/naples-sabot-line-standard-package
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/naples-sabot-mainsheet-block-set
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nut-nylock-m8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/32079.jpg?v=1676953155
M8 NYLOCK NUT
https://murrays.com/products/open-skiff-boom-fork
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31328-OpenBic-460.jpg-e1557433240800.jpg?v=1676953159
O'PEN SKIFF BOOM FORK
O'Pen Skiff Boom Fork
Murrays Part# 65-31328
Front fork for the O'pen boom
Tahe Part# 31328
https://murrays.com/products/open-skiff-cunningham-assembly-complete
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/53289-OpenBic-Ronstan-460_jpg.jpg?v=1676953163
O'PEN SKIFF CUNNINGHAM ASSEMBLY COMPLETE
O'Pen Skiff Cunningham
Assembly Complete
Murrays Part# 65-53289
Complete Cunningham hoist / downhaul. Includes line and pulleys
Tahe Part# 53289
https://murrays.com/products/open-skiff-drain-plug-housing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/53264-openbic-460-1.jpg?v=1676953167
O'PEN SKIFF DRAIN PLUG HOUSING
O'Pen Skiff Drain Plug Housing
Murrays Part# 65-53264
Drain plug support
Tahe Part# 53264
https://murrays.com/products/open-skiff-custom-deck-cover
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/deck-cover.jpg?v=1676953167
O'PEN SKIFF TOP COVER
O'Pen Skiff Top Cover
Murrays Part# 65-102557
O'pen Skiff deluxe deck cover with ultraviolet protection
Technical Specs:
Country of manufacture: China
Material: Polyester
Outside face material: Polyester
Foam Thickness 3 mm
Length 9'0" / 275 cm
Tahe Part# 102557
https://murrays.com/products/open-skiff-drain-plugs-10-pk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30978-BicKayaks-460.jpg__66584.1532046024.jpg?v=1676953169
O'PEN SKIFF DRAIN PLUGS
O'Pen Skiff Drain Plugs Pk (10)
Murrays Part# 65-30978
Pack of 10 of drain plugs for all Bic/Tahe
Tahe Part# 30978
https://murrays.com/products/open-skiff-mainsheet
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31562-OpenBIC-460_jpg.jpg?v=1676953171
O'PEN SKIFF MAINSHEET RED
O'Pen Skiff Mainsheet Red
Murrays Part# 65-31562
Polyamide mainsheet sheet, 8mm diameter
Tahe Part# 31562
https://murrays.com/products/open-skiff-front-towing-handle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/52789-BicKayaks-460.jpg-e1557435262683.jpg?v=1676953171
O'PEN SKIFF FRONT TOWING HANDLE
O'Pen Skiff Front Towing Handle
Murrays Part# 65-52789
This is a replacement bow handle for the O'Pen Skiff. Fits O'Pen Bic or O'Pen Skiff sailboats.
Tahe Part# 52789
https://murrays.com/products/open-skiff-mainsheet-deck-mount-eye-strap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/65-53262.png?v=1719503565
O'PEN SKIFF MAINSHEET DECK MOUNT EYE STRAP
O'Pen Skiff Mainsheet Deck
Mount Eye Strap
Murrays Part# 65-53262
Trigger for hooking up the main sail block. Fixed to the bottom of the boat
Tahe Part# 53262
https://murrays.com/products/open-skiff-rudder-mount-bottom
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/OPen-Rudder-Mount-Bottom.jpg?v=1676953177
O'PEN SKIFF RUDDER MOUNT BOTTOM
O'Pen Skiff Rudder Mount Bottom
Murrays Part# 65-53269
Lower stainless steel needle
Tahe Part# 53269
https://murrays.com/products/open-skiff-pads-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/3458-openbic-460_jpg.jpg?v=1676953178
O'PEN SKIFF PADS SET
O'Pen Skiff Pads Set
Murrays Part# 65-100038
The O’Pen Skiff Pads Set for the O’Pen Skiff
https://murrays.com/products/open-skiff-rudder-mount-top
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/53270-OpenBic-460_jpg.jpg?v=1676953179
O'PEN SKIFF RUDDER MOUNT TOP
O'Pen Skiff Rudder Mount Top
Murrays Part# 65-53270
Upper stainless steel needle
Tahe Part# 53270
https://murrays.com/products/open-skiff-standard-rig-complete-boat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/openbic_drawing-7000_2014_550px__34953.1401560089.500.659.jpg?v=1676953181
O'PEN SKIFF STANDARD RIG-COMPLETE BOAT
O'Pen Skiff Standard Rig- Complete Boat
Murrays Part# 65-5005
For Fun, Recreation, Perfection Racing
O’pen Skiff (formerly O'Pen Bic) celebrated its 10th birthday in 2016, along with the production of its 8,000th boat. Designed specifically for juniors, the little dinghy has blown a big breath of fresh air through the sailing world.
https://murrays.com/products/open-skiff-tiller-end-plug-10-pk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31697-OpenBic-460_jpg.jpg?v=1676953183
O'PEN SKIFF TILLER END PLUG (10PK)
O'Pen Skiff Tiller End Plug
Murrays Part# 65-31697
This part commonly fails in the rudder housing and fractures out of the assembly, causing the rudder to be very sloppy or fall of the boat. The earlier boats used rivets, latter boats used screws and nuts. This pack of ten is great for a fleet. If you have a fleet and are struggling with these issues, consider the Solid Murrays Tiller End Plug upgrade.
https://murrays.com/products/nacra-inf-18-forestay-bare-5-32
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Inter18forestay.jpg?v=1740700099
NACRA INFUSION 18 FORESTAY 5/32" BARE WIRE
https://murrays.com/products/open-skiff-transom-rudder-clip-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/openbic_languette_2016-03_101327__77784.1532046085.jpg?v=1676953186
O'PEN SKIFF TRANSOM RUDDER CLIP SS
O'Pen Skiff Transom Rudder Clip SS
Murrays Part# 65-101327
This is the transom clip that holds the rudder assembly onto the back of an O'Pen skiff sailboat. This is a more substantial part than what was found on the earlier O'Pen Bic sailboats. Replace or upgrade your rudder clip today!
Tahe Part# 101327
https://murrays.com/products/open-skiff-tiller-extension-70cm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31695-OpenBic-460_jpg.jpg?v=1676953187
O'PEN SKIFF TILLER EXTENTION 70CM
O'Pen Skiff Tiller Extension 70cm
Murrays Part# 65-31695
Stick of 70 cm for the O'pen Skiff. Non-slip coating.
Tahe Part# 31695
https://murrays.com/products/opti-tapered-mainsheet-blue-silver
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-OPTI.jpg?v=1676953188
OPTI TAPERED MAINSHEET BLUE/SILVER
https://murrays.com/products/orion-safety-whistle-2pk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-8600.jpg?v=1676953191
ORION SAFETY WHISTLE (2 PACK)
https://murrays.com/products/orion-500-2mm-mini-spool
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-MRO2.jpg?v=1729613484
ORION 500 2MM MINI SPOOL
Orion 500 2mm Mini Spool
The Orion 500 2mm mini spool is a premium polyester all round line. The product features a 16-plait braided polyester cover combined with polyester yarn.
Specifications:
Core: polyester
Cover: polyester 16
Diameter: 2mm
Length: 15m
Colors: red, yellow, black
https://murrays.com/products/positive-mast-rotation-h17-20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/396E574B-A910-415F-9511-5EA86FAEC7F3.jpg?v=1759777818
H-17/20 POSITIVE MAST ROTATION
https://murrays.com/products/prindle-15-16-escape-boom-extrusion-with-slot
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/propeller-guard-for-torqeedo-cruise-motors
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/propeller-guard-2_0c6636e7-14f7-48c8-a01d-7ce6f54611a6.png?v=1676995818
PROPELLER GUARD FOR TORQEEDO CRUISE MOTORS 2.0/4.0 (2009-2016)
https://murrays.com/products/quick-release-pin-deluxe-3-16-x-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-3m075.jpg?v=1676953203
QUICK RELEASE PIN DELUXE 3/16 X 1"
Quick Release Pin Deluxe 3/16 X 1"
Murrays Part# 18-3M100
This convenient pin features a deluxe dished head with a hole for lanyard attachment. No other locking pin is faster operating or safer.
The pin is also available with a 1/16" x 7" stainless lanyard with nicropress ovals (see related items). Measurements for this quick pin with cup head are 3/16" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings).
https://murrays.com/products/rear-crossbar-complete-5-7-used
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/C3AC13FB-C209-44E7-90F9-68F46377122B.jpg?v=1759769054
NACRA 5.7 REAR CROSSBAR COMPLETE-USED
https://murrays.com/products/retainer-clip-ez-loc-rdr-housing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/90880231_Hobie_EZ_Loc_Rudder_Clip.jpg?v=1758658753
HOBIE EZ LOCK RUDDER CLIP
Hobie EZ Lock Rudder retainer clip
Murrays Part# 50-90880231
Retainer clip for Hobie Bravo EZ Loc Rudder Housing.
Hobie Part# 90880231
https://murrays.com/products/rivet-4-8x16mm-alu-rvs
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31294.jpg?v=1676953218
NACRA RIVET 4.8x16MM ALUMINUM RVS
https://murrays.com/products/rivet-lwr-rdr-housing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50313301.jpg?v=1676953218
HOBIE EZ LOC LOWER RUDDER HOUSING TUBE RIVET
Hobie EZ Loc Lower Rudder Housing Tube Rivet
Murrays Part# 50-50313301
Rivet for the lower rudder housing on Hobie Bravo, Getaway and wave EZ Loc Systems.
Hobie Part# 50313301
https://murrays.com/products/rivet-washer-nylon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40200.jpg?v=1676953219
RIVET WASHER NYLON
Rivet Washer Nylon
Commonly used on NACRA catamarans to insulate the stainless rivet from aluminum extrusions.
Nacra PN 40200
https://murrays.com/products/rigbox-kit-spreader-attachment-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/sprdr-kit.webp?v=1741818554
NACRA RIGBOX SPREADER KIT
Nacra Rigbox Spreader Kit
Murrays Part# 56-40124
Complete kit for attaching your spreaders. Includes pins, rings, cover, adjuster screw ends, and twist wire
https://murrays.com/products/robline-medium-soft-shackle-6mm-sk78
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Robline-Soft-Shackle-Ocean-21-DSH.jpg?v=1676953225
ROBLINE SMALL SOFT SHACKLE- 6MM SK78
https://murrays.com/products/robline-large-soft-shackle-9mm-sk78
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Robline-Soft-Shackle-Ocean-21-DSH_3290cf77-0b34-4d89-af6d-52e52edb02ae.jpg?v=1676953225
ROBLINE SMALL SOFT SHACKLE-9MM SK78
Robline Small Soft Shackle - 4mm SK78
Murrays Part# 21-DSH9
The Robline Small Soft Shackle is a great alternative to the metal shackle, with no clevis pins to loose in the water or sand. Soft shackles are also very easy on the boat as they are soft and flexible
Quick and easy way to attach jib clew blocks to the jib and the main sheet blocks to the main sail.
https://murrays.com/products/robline-xs-soft-shackle-2-5mm-sk78
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Robline-Soft-Shackle-Ocean-21-DSH_27267264-e0ca-4722-82f8-860708f25c2e.jpg?v=1676953232
ROBLINE SMALL SOFT SHACKLE-2.5MM SK78
https://murrays.com/products/robline-xl-soft-shackle-12mm-sk78
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Robline-Soft-Shackle-Ocean-21-DSH_cca599c2-853c-46f3-87ec-6f63d21504a5.jpg?v=1676953234
ROBLINE SMALL SOFT SHACKLE-12MM SK78
https://murrays.com/products/robline-xxl-soft-shackle-14mm-sk78
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Robline-Soft-Shackle-Ocean-21-DSH_ef661f8f-8c41-418a-8d20-663ee1d8c1ad.jpg?v=1676953235
ROBLINE SMALL SOFT SHACKLE-14MM SK78
https://murrays.com/products/ronstan-deck-eye-13-5mm-low
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31945.jpg?v=1676953238
RONSTAN DECK EYE 13.5MM
https://murrays.com/products/ronstan-universal-joint
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/RF3133.jpg?v=1676953243
RONSTAN URETHANE UNIVERSAL JOINT
Ronstan Urethane Universal Joint
Murrays Part# 21-3133
Smooth, uniform rotation in all directions and a quick, firm response to steering movements. The RF3133 universal joint with snap-on cover is designed to allow quick fitting and removal of the tiller extension from the fixed base.
Includes urethane universal, heat shrink tubing, and two-piece mounting base.
Universal Joint:
Urethane tiller extension universal joint. Suits 13.5mm (17/32") ID Tube
https://murrays.com/products/rudder-blade-nf18inf-f20c-nacra-17-mki
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30131.jpg?v=1676953244
NACRA RUDDER BLADE
Rudder Blade
Murrays Part# 56-30131
Nf18inf, F20C, N17 and MKi
https://murrays.com/products/rooster-tell-tails
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/rooster-sailing-tell-tales-laser-sailboat-racing.jpg?v=1676953248
ROOSTER TELL TAILS
Rooster Tell Tails
Murrays Part# 48-101579
The Rooster Tell Tails come in a pack of three green and three red self adhesive wool telltales (with TEFLON® treatment) that don´t stick to the sail when they are wet.
https://murrays.com/products/rudder-cast-lower-14-16-used
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/D9E0DC55-E466-4C94-A926-863AB431E6DF.jpg?v=1744669426
H-14/16 LOWER RUDDER CASTING-USED
https://murrays.com/products/rudder-casting-upper-rt-bk-used-w-h18-tiller-arm
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/rudder-gudgeon-lower-countersunk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-32076_8d56c924-3620-4b0a-8c4d-d134534dcf6d.jpg?v=1676953255
NACRA LOWER COUNTERSUNK RUDDER GUDGEON
https://murrays.com/products/rudder-locking-kit-hobie-17-18-20-21
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3552.jpg?v=1676953255
H-17/18/20 and 21 RUDDER LOCKING KIT
Rudder Locking Kit Hobie 17, 18, 20, 21
Murrays Part# 001-3552
The Rudder Locking Kit Hobie 17, 18, 20, 21 includes the rudder spring, rudder casting screw, and the rudder plunger for the Hobie 17, 18, 20 and 21.
Delrin screw is 3/4-10 thread. In many cases you can drill it out with a 5/8" drill bit and then get a 3/4-10 tap to clear the threads.
https://murrays.com/products/rudder-return-kit-for-h17-18-21
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/012-2059_image.jpg?v=1719505477
H-17/18/21 RUDDER RETURN KIT
Rudder Return Kit: H17/18/21
Murrays Part# 012-2059
Help prevent your rudders from constantly kicking up with the Rutter return kit. Originally from TrenTec, now made by Murrays Sports.
https://murrays.com/products/s19-alloy-c-track-end-cap-pair-only
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0366_c7923ab8-20dd-4393-9ed5-f6bde5030bdd.webp?v=1719350516
RONSTAN SERIES 19 C-TRACK END CAP (2)
S19 Alloy C-Track End Cap Pair Only
Murrays Part# 21-91980
The S19 Alloy C-Track End Cap
Features
Spring-loaded plunger stops allow fast, positive positioning of track slides
Slides are available with swiveling cleat and fairlead to suit different crewing position
https://murrays.com/products/s19-c-track-composite-slide-saddle-top
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-91901.webp?v=1719350014
RONSTAN SERIES 19 C-TRACK COMPOSITE SLIDE, LOOP TOP
Ronstan Series19 C-Track Composite Slide, Loop Top
Murrays Part# 21-91901
The S19 C-Track Composite Slide Saddle Top- The spring-loaded plunger stops allow fast, positive positioning of track slides. The slides are available with swiveling cleat and fairlead to suit different crewing positions.
https://murrays.com/products/s19-c-track-composite-slide-saddle-plunger
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-91940.webp?v=1719350139
RONSTAN SERIES 19 C-TRACK COMPOSITE SLIDE, LOOP TOP, PLUNGER STOP
Ronstan S19 C-Track Composite
Slide, Loop Top, Plunger Stop
Murrays Part# 21-91940
Suitable for dinghy and small catamaran jib sheet leads and dinghy outhauls.
Features:
Spring-loaded plunger stops allow fast, positive positioning of track slides
Slides are available with swiveling cleat and fairlead to suit different crewing positions
Applications:
Dinghy and small catamaran jib sheet leads
Dinghy outhauls
https://murrays.com/products/s19-c-track-slide-swivel-fairlead-cleat-amp-stop
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-91942.jpg?v=1676953262
RONSTAN SERIES 19 C-TRACK COMPOSITE SLIDE, LOOP TOP, PLUNGER STOP
Ronstan Series 19 C-Track Composite Slide, Loop Top, Plunger Stop
Murrays Part# 21-91942
Features:
Spring-loaded plunger stops allow fast, positive positioning of track slides
Slides are available with swiveling cleat and fairlead to suit different crewing positions
Applications:
Dinghy and small catamaran jib sheet leads
Dinghy outhauls
https://murrays.com/products/screw-10x1-phsms-p-tf-12
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8032211.jpg?v=1676953267
SCREW #10X1 PHSMS-P TF-12
Screw #10X1 PHSMS-P TF-12
Murrays Part# 50-8032121
Hobie Part# 8032121
https://murrays.com/products/screw-1-4-20x1-25-phpms
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-8032061.jpg?v=1701423459
SCREW 1/4/20x1.25" PHPMS
Screw 1/4/20x1.25" PHPMS
Murrays Part# 50-8032061
Rear Hatch Screw for Hobie Bravo.
Hobie Part# 8032061
https://murrays.com/products/screw-1-4-20-x-1-1-4-phms
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8031191.jpg?v=1676953270
SCREW 1/4-20 x 1-1/4" PHMS
Screw 1/4-20 x 1-1/4" PHMS
Murrays Part# 50-8031191
Tiller Extension Hinge Screw
https://murrays.com/products/screw-10-32-x-3-4-phpms
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8030981.jpg?v=1676953270
SCREW 10-32 x 3/4" PHPMS
Screw 10-32 x 3/4 PHPMS
Murrays Part# 50-8030981
Mainsheet Bracket Screw for Hobie Bravo.
https://murrays.com/products/screw-12x24x1-ph-long-lok
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8030402.jpg?v=1676953271
SCREW 12x24x1 PAN HEAD (LONG LOCK)
Screw 12x24x1 Pan Head (Long Lock)
Murrays Part# 50-8030402
This screw is used to hold the rudder gudgeons on the back of the boat.
Hobie Part# 8030402
https://murrays.com/products/screw-12-24-x-3-4-rhms-p-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8030171-pic.jpg?v=1676953273
SCREW 12-24 x 3/4 RHMS-P SS
Screw 12-24 x 3/4 RHMS-P Stainless Steel
Murrays Part# 50-8030170
Hobie Part# 8030170
https://murrays.com/products/series-15-bb-block-single-swivel-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-15100.webp?v=1718993793
RONSTAN SERIES 15BB BLOCK-SINGLE SWIVEL HEAD
Ronstan Series 15 BB Block - Single Swivel Head
Murrays Part# 21-15100
The Series 15 BB Block - Single Swivel Head is the smallest and lightest ball bearing block available. It features a precision molded acetal sheave running on stainless steel ball bearings which provide high performance and low friction. Single loop head blocks include an O-ring to separate running line from head lashing or fixing.
https://murrays.com/products/series-15-bb-block-single-block-becket-loop-head
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-15111.webp?v=1718994067
RONSTAN SERIES 15 BALL BEARING SINGLE BLOCK WITH LOOP TOP AND BECKET
Ronstan Series 15 Ball Bearing Single Block with Loop Top and Becket
Murrays Part# 21-15111
This is a great little block, for weight, durability and working loads.
Features:
Smallest and lightest ball bearing block available
Precision molded acetal sheave running on stainless steel ball bearings provide high performance low friction
Single loop head blocks include an O-ring to separate running line from head lashing or fixing.
https://murrays.com/products/series-15-bb-block-single-loop-top
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-15101.webp?v=1718993957
RONSTAN SERIES 15BB BLOCK, SINGLE LOOP TOP
Series 15 BB Block, Single Loop Top
Murrays Part# 21-15101
The Series 15 BB Block, Single Loop Top is the smallest and lightest ball bearing block available. With a precision molded acetal sheave running on stainless steel ball bearings that provide high performance low friction. It has a single loop head blocks include an O-ring to separate running line from head lashing or fixing.
Applications:
Dinghy control lines
Vangs, cunninghams and tweakers
Shock cord tensioning systems
https://murrays.com/products/shroud-anchor-pin-h16-17-18-updated
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20100000-shroud-anchor-pin_afd96961-ce6c-4b82-8fe6-f250280a9465.jpg?v=1676953288
HOBIE SHROUD ANCHOR PIN 20100000
Hobie Shroud Anchor Pin Hobie 16, 17 and 18. 20100000 20100010
https://murrays.com/products/sk78-mini-spool-2mm-dyneema-lashing-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-MRX2.webp?v=1719352141
SK78 MINI DYNEEMA SPOOL 2MM
https://murrays.com/products/skeg-for-cruise-10-0-r
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/fin-for-cruise-100-r-1200x1200.jpg?v=1676953292
TORQEEDO SKEG FOR CRUISE 10.0 R
https://murrays.com/products/sk78-mini-spool-3mm-dyneema-lashing-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-MRX3.webp?v=1719352236
SK78 MINI DYNEEMA SPOOL 3MM
SK78 Mini Spool 3mm Dyneema Lashing Line
The SK78 Mini Spool 3mm- Robline Dyneema good for any small boat kit…. for tying. lashing, lanyards, pigtails etc. Easily spliced with a small Selma Fid or a D Splicing tool.
Honeywell International produces a similar line, marketed as Spectra®
Identical to Ocean 3000 XG, but on a smaller spool, this rope is made of pure Dyneema SK78 and treated with FSE Robline’s S.Y.I.S. coating technology.
Dyneema SK78 has the same high strength of SK75, but with lower creep
https://murrays.com/products/spi-halyard-tapered-green-white-nacra-15
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-50026.jpg?v=1676953301
NACRA 15 SPINNAKER TAPERED HALYARD
Nacra 15 Spinnaker Tapered Halyard
Murrays Part# 56-50026
This spihalyard tapered NACRA 15 (green/white), is made out of SSR from Alpha Ropes. The spihalyard is ready to go, completed with tapering. The line gives a very soft feeling. The construction of the line is single braid, 16 strand (8x2), mix Dyneema® Sk78 / Cordura®. This line is not ready for kinking and is excellent for sheets.
https://murrays.com/products/spi-halyard-tapered-red-white-nacra-f18inf
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/download_94a09ace-68d3-4742-bda8-a8a009a1805c.jpg?v=1676953302
NACRA SPINNAKER TAPERED HALYARD
Nacra Spinnaker Tapered Halyard
Murrays Part# 56-50011
Spihalyard tapered Nacra F18 Infusion (red/white), , has a SSR basics, made by Alpha Ropes. Looking to the construction of the line, it's single braid, 16 strand (8x2), mix Dyneema® Sk78 / Cordura®. This line is not ready for kinking and is excellent for sheets. A advantage of this line, its soft while kept in your hands.
The spihalyard is ready to sail, completed with tapering for less resistance while hosting/dropping.
https://murrays.com/products/spreader-bar-aft-nacra-f20c
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-31193.jpg?v=1676953303
NACRA F20C AFT SPREADER BAR
https://murrays.com/products/spinnaker-inter-20-single-color
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/tapered-mainsheet-f16-n17-f18-12-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-50021.jpg?v=1676953311
NACRA TAPERED MAINSHEET
Tapered Mainsheet
Murrays Part# 56-50021
This mainsheet 1:12 nf16/nf18inf/NACRA 17 (yellow) has a Dcup kmix basics, made by Alpha Ropes. The construction of the line is double braid, 12 strand coated, Dyneema® Sk78 core, 24 plait mix with a HT Polyester / Cordura cover. This all round line, is ready to splice of taper and excellent for sheets, halyards and control lines.
https://murrays.com/products/swiftcord-5mm
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/tiger-bridle-5-32-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Tiger-Bridle.jpg?v=1676953313
TIGER BRIDLE 5/32"
https://murrays.com/products/tiller-arm-port-nacra-15
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Narcra-15-tiller-arm-56-3206.png?v=1676953315
NACRA 15 PORT TILLER ARM
https://murrays.com/products/tiller-arm-bravo
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/90382011.jpg?v=1676953317
BRAVO TILLER ARM
Bravo Tiller Arm
Murrays Part# 50-90382011
Replacement tiller arm for the Hobie Bravo. Original Hobie Cat hardware and standard on all Bravo sailboats.
Hobie Part# 90382011
https://murrays.com/products/tiller-arm-stbd-nacra-15
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Narcra-15-tiller-arm-56-3206_8574bdfa-b138-4418-81ea-d489218fc4c2.png?v=1676953317
NACRA 15 STARBOARD TILLER ARM
https://murrays.com/products/torqeedo-hi-speed-prop-cruise-2-0-4-0-1933
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1933.jpg?v=1676953319
TORQEEDO HI-SPEED PROP CRUISE 2.0/4.0
https://murrays.com/products/torqeedo-hi-speed-prop-cruise-2-0-4-0-1953
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1953.jpg?v=1676953323
TORQEEDO HI-SPEED PROP CRUISE 2.0/4.0
https://murrays.com/products/torqeedo-standard-prop-cruise-2-0-r-t
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1954.jpg?v=1676953324
TORQEEDO STANDARD PROP CRUISE 2.0 R/T
https://murrays.com/products/torqeedo-standard-prop-cruise-4-0-r-t
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1955.jpg?v=1676953327
TORQEEDO STANDARD PROP CRUISE 4.0 R/T
https://murrays.com/products/tramp-450-3pc-blk
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/upper-rudder-arm-h18-cl-lt-used
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/upper-rudder-arm-h18-cl-rt-used
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/used-rudder-casting-lower-h17-h18-h20-getaway-wave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/2D404BDD-89FC-44FB-98ED-0245E38F9F8B.jpg?v=1744669476
H-17/18/20, GETAWAY AND WAVE LOWER RUDDER CASTING-USED
https://murrays.com/products/washer-1-4-x-1-2-x-032-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8080561.jpg?v=1676953335
WASHER STAINLESS STEEL 1/4 x 1/2 x .032"
https://murrays.com/products/washer-8-4-standard-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/32080.jpg?v=1676953336
WASHER STAINLESS STEEL 8.4 STANDARD
https://murrays.com/products/washer-5-16-x-3-4-flat-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8080671.jpg?v=1676953336
WASHER STAINLESS STEEL 5/16 x 3/4" FLAT
Washer 5/16 x 3/4 Flat SS
Murrays Part# 50-8080671
EZ Loc Rudder Assembly Lower Bolt Washer for Hobie Bravo, Getaway and Wave
Hobie Part# 8080671
https://murrays.com/products/washer-ss-4-3-standard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/32303.jpg?v=1676953339
WASHER STAINLESS STEEL 4.3 STANDARD
https://murrays.com/products/wave-rear-crossbar
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/38191031.jpg?v=1676953339
WAVE REAR CROSSBAR
Wave Rear Crossbar
Murrays Part# 50-38191031
Hobie Wave Rear crossbar
Hobie Part# 38191031
https://murrays.com/products/wave-front-crossbar-1438up
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/381310413z163-front.jpg?v=1676953340
WAVE FRONT CROSSBAR 1438UP
Wave Front Crossbar 1438up
Murrays Part# 50-38131041
Forward crossbar for the Hobie Wave.
https://murrays.com/products/wing-cover-h17-top-gun-pr-so
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/west-systems-g-flex-thickened-epoxy
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/G-Flex-Epoxy.jpg?v=1676953345
WEST SYSTEMS G/FLEX THICKENED EPOXY
West Systems G/ Flex Thickened Epoxy
Murrays Part# 40-6558
West Systems G/ Flex Thickened Epoxy is two 4 oz tubes. One of the 4 oz tubes is Resin, and the other 4 oz tube is Hardener. The Thickened Epoxy quickly builds up thickness and will not run or sag. It permanently bonds fiberglass, ceramics, metals and plastics. It adheres tenaciously to difficult-to-bond woods including resinous woods and even wet wood.
https://murrays.com/products/wing-covers-h18-top-gun
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/wizard-hat-universal-hydrofoil-mast-track-hardware-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Wizard-Hat-Hydrofoil-Mast-Track-Hardware.jpg?v=1676953347
WIZARD HAT UNIVERSAL HYDROFOIL MAST TRACK HARDWARE KIT
https://murrays.com/products/x-bar-front-h16-bk-w-castings-used
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/tiller-xbar-h14-bk-used
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10520011-1.jpg?v=1676953352
H-14 TILLER CROSS BAR- USED
https://murrays.com/products/bws-undertow-off-switch-bungee
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/009-300x300.jpg?v=1676953458
BWS UNDERTOW OFF SWITCH BUNGEE
BWS Undertow Off Switch Bungee
Murrays Part# 54-0201
The BWS Undertow Off Switch Bungee is the safety o flagging line for BWSurf Undertow bars. It is compatible with all Undertow bars. BWS factory replacement part.
https://murrays.com/products/bwsurf-stubby-tail-pad
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Stubby-Tail-YD.jpg?v=1676953462
BWS PADS-STUBBY TAIL
https://murrays.com/products/liquid-force-happy-foil-wing-cover
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Foil-Covers_a55c86bc-3cbe-431b-8580-6ce6695c9873.png?v=1676953585
LIQUID FORCE HAPPY FOIL WING COVER
https://murrays.com/products/gaskets-for-barz-sport-goggles
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/hobie-wave-mesh-trampoline-1-piece-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-38970055_4a487cb7-9846-4be4-b0f4-fd67845fc335.jpg?v=1677108743
WAVE CLASSIC MESH TRAMPOLINE-BLACK
Wave Classic Mesh Trampoline-Black
Murrays Part# 50-38970055
Hobie Wave Mesh Trampoline for Wave Classic SE is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket.
Which Wave model do you have?
Standard Wave/Classic or SE is car toppable and has a one-piece trampoline. Shrouds and bridles connect with hooks.
https://murrays.com/products/hobie-wave-mesh-trampoline-1-piece-turqoise
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-38970058_3f0aa116-9597-43a7-a428-83ef7eca1a01.jpg?v=1677108744
WAVE CLASSIC MESH TRAMPOLINE-TURQUOISE
Wave Classic Mesh Trampoline-Turquoise
Murrays Part# 50-38970058
Hobie Wave Mesh Trampoline for Wave Classic SE is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket.
Which Wave model do you have?
Standard Wave/Classic or SE is car toppable and has a one-piece trampoline. Shrouds and bridles connect with hooks.
https://murrays.com/products/jib-traveler-car-2005-port
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/25232211z103.jpg?v=1724275427
JIB TRAVLER CAR 2005 AND NEWER
Jib Traveler Car 2005 and Newer
Hobie®'s jib traveler car for the integrated track crossbar on the Hobie® 16 adds bearings to the popular version from the 2004 Worlds. Standard equipment since late 2005, this jib traveler is constructed of Zytel, a very strong, glass-reinforced nylon that resists fatigue and impact failure. Brass traveler bearings give easier movement under load. Includes holes for anchoring traveler and traveler return lines.
https://murrays.com/products/slingshot-pigtails-set-of-4-for-kite
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/54-601-300x300.jpg?v=1733960598
SLINGSHOT PIGTAILS (BAR)
Slingshot Pigtails
Murrays part# 54-6013
Replacement pigtails with foolproof connections help prevent wear and tear on your lark's heads. Easy to pull off, saving teeth and nails. Line/bar pigtails are pictured.
Sold in a package of 4
https://murrays.com/products/turnbuckle-jaw-25x25-lh
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1048-1.jpg?v=1676950520
TURNBUCKLE JAW 1/4 X 28 LH
https://murrays.com/products/turnbuckle-jaw-25x25-rh
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1048-1.jpg?v=1676950520
TURNBUCKLE JAW 1/4 X 28 RH
https://murrays.com/products/qr-pin-deluxe-3-16-x-1-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/18-4D100.jpg?v=1725901779
QR PIN DELUXE 3/16 X 1/2"
Quick Release Pin Detent 1/4 X 1"
Murrays Part# 18-4D100
This quick pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measures 1/4" diameter x 1" long.
Can be used to replace 1/4" clevis pins up to 1" long. Not recommended for use in shroud adjusters or chain plates.
https://murrays.com/products/57mm-5-sheave-carbo-block-w-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/null_img.jpg?v=1677744845
HARKEN 57MM 5-SHEAVE BLOCK-SWIVEL
Harken 57mm 5-Sheave Block-Swivel
Murays Part# 28-2762
Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
https://murrays.com/products/57mm-triple-ratchet-block-swivel-40-mm-side-carbos-cam-cleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-8454.jpg?v=1679598252
HARKEN 57MM TRIPLE RATCHET BLOCK-SWIVEL, 40MM SIDE CARBOS, CAM CLEAT
Harken 57mm Triple Ratchet Block-Swivel, 40 mm Side Carbos, Cam Cleat
Murrays Part# 28-8454
Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.
https://murrays.com/products/h-16-auss-jib-halyard-pigtail-1-8-bk-race
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-0284-00R.jpg?v=1721238909
H-16 AUSSIE JIB HALYARD PIGTAIL
Aussie Jib Halyard Pigtail
Murrays PN 002-0284-00R
Jib halyard pigtail for the Aussie system on a Hobie 16. Constructed with 1/8" 7x19 bare wire.
Compare to Hobie part number 20810041.
This model is built to the 2009 factory spec.
Often paired with a 28-0186 Harken Fiddle Block.
https://murrays.com/products/8mm-harken-bow-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/null_img_fd6ba695-58d3-475e-9f7f-962556b9d7c7.jpg?v=1677885012
HARKEN 8MM BOW SHACKLE
Harken 8mm Bow Shackle
Murrays Part# 28-2117
The Harken 8mm Bow Shackle is a forged stainless steel shackle that is polished to a high luster and stamped with the screw pin diameter. Bow shackles are best for multidirectional loads. Their large interior opening allows plenty of articulation especially when attached to a round bail.
https://murrays.com/products/bolt-soc-hd-5-16-18-x-1-5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/null_img_e9559bef-33e6-4798-8f20-7c94340deff9.jpg?v=1677886548
BOLT 5/16-18 X 1.5" (SS)
Bolt Allen Head 5/16 18 X 1.5" (Stainless Steel)
Murrays Part# 19-2229S
Bolt Allen Head 5/16 - 18 X 1.5 (Stainless Steel) - replace hex head bolts used on Hobie 16, 17, 18, 20
Upper adjustable rudder castings.
Limited space for Hex head requires thin walled 1/2" socket with 1/6" drive.
Socket head bolt uses Allen head tool which is cheap, strong, and compact for on board storage and convenient adjustment.
https://murrays.com/products/tiller-ext-hinge
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/null_img_458b0dee-9e48-449d-a494-004a4be35794.jpg?v=1677886825
HOBIE TILLER EXTENSION HINGE
Hobie Tiller Extension Hinge
Murrays Part# 50-10532010
Hobie® factory replacement tiller extension hinge for #50-20550001 Hobie® Fiberglass tiller extension. Also used on Nacra tillers.
Hobie Part Number: 10532010
https://murrays.com/products/halyard-shackle-hobie
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie_Halyard_shackle_10670000.jpg?v=1751474685
HOBIE HALYARD SHACKLE
HOBIE HALYARD SHACKLE
Replacement Hobie halyard shackle for Hobie cat main halyards. Used on the Hobie Wave, Getaway, 14, and 16.
The keeper pin is contained so you can't drop the pin in the water or sand and loose it.
Hobie part number 10670000
https://murrays.com/products/decal-mast-caution-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/13440000_6_z29.jpg?v=1726093639
BLACK MAST CAUTION DECAL
Black Mast Caution Decal
Murrays Part# 50-13440000
The Decal Mast Caution Black Hobie® factory caution decal attaches to mast as a reminder to watch for overhead power lines when sailing and/or launching your boat.
https://murrays.com/products/sail-and-boom-bag-standard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/null_img_1103906a-19ab-4eb6-b10a-033e732b6b2e.jpg?v=1742833623
HOBIE SAIL AND BOOM BAG STANDARD
https://murrays.com/products/hobie-16-aussie-jib-halyard-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie_16_Aussie_Jib_Halyard_Kit_8066000.jpg?v=1758239255
H-16 AUSSIE JIB HALYARD KIT
The Aussie Jib Halyard Kit for the Hobie 16 allows easier tacking, better mast rotation and consistent mast bend! Reduce mast compression by 66%! Use with one piece Aussie Jib Forestay. Or use an upper forestay and a separate Aussie Forestay. The Hobie 16 Aussie Jib Halyard Kit includes everything you need to connect your jib halyard to the Aussie forestay Pigtail: hardware with all Harken blocks, 70' of pre-stretched line, fairlead with rivets, zippered pouch and instructions. Class legal for racing.
https://murrays.com/products/shackle-bow-5-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0636.jpg?v=1756247735
RONSTAN 5/16" BOW SHACKLE
Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole
Murrays Part# 21-0636
The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081.
Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
https://murrays.com/products/tramp-h16-1pc-bias-cut-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3102-1_3.jpg?v=1719505348
H-16 1-PIECE BIAS CUT MESH TRAMPOLINE-BLACK
https://murrays.com/products/tiller-x-bar-h16-17-18-post-95
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/null_img_f8aa4001-6969-40b2-afd4-6706ab52a3bf.jpg?v=1677887108
H-16/17/18 TILLER CROSSBAR-POST 1995
H16/17/18 Tiller Crossbar-Post-1995
Murrays Part# 50-20521001
The Tiller Crossbar H16, H17, H18 Post-1995- is a Hobie® factory replacement tiller crossbar for 1995 and newer Hobie® 16, 17 or 18.
The Post 95 version comes with the new style quick connect tiller connection system.
https://murrays.com/products/2022-fanatic-sky-wing-te
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Fanatic_Sky_Wing_TE.png?v=1678309958
FANATIC 2022 SKY WING TE 5'0" 75L
2022 Fanatic Sky Wing TE - 5' x 75L
https://murrays.com/products/2mm-orion-500-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/39-2302bk_e5213547-33e3-44b4-8724-83b52afa097d.jpg?v=1678309953
ROBLINE 2mm ORION 500 CONTROL LINE
2mm Orion 500 Line
Murrays Part# 39-2302BK
Robline's 2mm Orion 500 Line is a 16-plait polyester cover and its 8-plait core provide for good grip and make the rope easy to splice. The ideal choice for all cruising enthusiasts.
Features
Versatile, easily handled and easily spliced polyester double braid is ideal for use as control lines, lashing and dozens of other uses aboard.
Best Use: Control lines, tie downs and general lashing
Construction: Double braid
Cover Fiber/Construction: 16-plait
https://murrays.com/products/3mm-alpha-ultraneema-control-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/39-4303bk-e1616110700482.jpg?v=1678309966
ULTRANEEMA CONTROL LINE 3MM
Ultraneema Control Line 3mm Black
Murrays Part# 39-4303bk
3mm Alpha Ultraneema Control Line is a Double braid: 16 strand Dyneema® Sk78 core, HT Polyester cover. It can be good for trampoline lacing or soft attach block mounting on your performance cat.
https://murrays.com/products/6mm-harken-bow-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2117-1_3257a0c0-9c8a-4bda-a6fb-acd78c60228e.jpg?v=1678309967
HARKEN 6MM BOW SHACKLE
https://murrays.com/products/8-twist-n-seal-gasket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71331001.jpg?v=1678309970
8" TWIST-N-SEAL GASKET
8" Twist-N-Seal Gasket
Murrays Part# 50-71331001
Twist-N-Seal Gaskets have a better seal. The lids also hinge open, so you never lose the lid. Designed with a cork-screw-like mechanism for closure, a simple twist of the handle opens or closes the hatch. As the screw pulls down the hatch, you get a tight seal on the Ring. The round hatch seals around the edge of the cylinder and does not have to be held down against a flat surface to seal.
https://murrays.com/products/84-murrays-fiberglass-tiller-extension
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/unnamed-2-scaled.jpg?v=1678309973
MURRAYS 84" FIBERGLASS TILLER EXTENSION
84" Murrays Fiberglass Tiller Extension
Murrays Part# 001-1320
The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by an A Fleet Racer looking for a lighter more economic alternative. Murrays helped get them into production and here they are!
Features:
5/8" diameter black fiberglass tube
Hobie yoke base, same as the Hobie version
16" grip on the top
84" fixed length
Weight: 3/4 lb.
https://murrays.com/products/alpha-rope-cruiser-24-6mm-grey
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/6mm-Top-Cruiser-Kmix-Alpha-Ropes.jpg?v=1734049493
CRUISER 24 6MM GREY
Alpha Rope Cruiser 24 6mm Grey
Murrays Part# 39-4606gy
Cruiser 24 Kmix from Alpha Ropes is a great all around line for sheets and control lines. This 6 mm double braid line is light weight and offers great grip. It features strong HT polyester core with 24 plait polyester cover for great durability and grip.
https://murrays.com/products/bag-for-rigging-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/riggingbag.jpg?v=1678309979
NACRA RIGGING BAG
Nacra Rigging Bag
Murrays Part# 56-13533
Zip up rigging bag for NACRA catamarans. Includes multiple zipper pouches for separating cables and keeping them safe for traveling.
https://murrays.com/products/bbt-helmet-mount-rubber-band-style
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BBT-Helmet-Mount-Rubber-Band-Style.png?v=1678309982
BBTALKIN' HELMET MOUNT- RUBBER BAND STYLE
Helmet Mount - Rubber Band Style
Murrays Part# 52-2528R
BBTalkin' units come with a standard helmet mount. For customers’ using our products on their helmets during high impact sports, we designed this new rubber band helmet mount. These mounts are for helmets only.
https://murrays.com/products/beam-u-bracket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1042-scaled.jpg?v=1678309983
NACRA BEAM U-BRACKET
Beam U-Bracket
Murrays Part# 56-1042
Nacra Part# 1042
https://murrays.com/products/bolt-3-8-16-x-5-75-sckt-hd
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8040590.jpg?v=1678309988
BOLT 3/8-16 x 5.75 SOCKET HEAD
https://murrays.com/products/bolt-3-8-16x4-1-2-skct-hd
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8040580.jpg?v=1678309989
BOLT 3/8-16x4-1/2 SOCKET HEAD
https://murrays.com/products/bolt-5-16-18x3-4-hx-hd-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8040080z271.jpg?v=1678309990
BOLT 5/16-18X3/4 HX HD SS
https://murrays.com/products/boom-nacra-f18inf
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/31078.jpg?v=1678309991
NACRA F18INF BOOM
https://murrays.com/products/bracket-wing-leg
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/37661050.jpg?v=1678309991
GETAWAY WING LEG BRACKET
Hobie Getaway Wing Leg Bracket
Murrays Part# 50-37661050
Trampoline wing leg bracket for Hobie Getaway.
Hobie Part# 37661050
https://murrays.com/products/bravo-mast-float-w-straps-and-buckles
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/90600012.jpg?v=1678309993
BRAVO MAST FLOAT WITH STRAPS AND BUCKLES
Bravo Mast Float With Straps And Buckles
Murrays Part# 50-90600012
Hobie Bravo mast flat with strap. Found on current Bravo sailboats.
https://murrays.com/products/brunotti-aquaclamp
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Brunotti-Aquaclamps.png?v=1678309993
BRUNOTTI AQUACLAMP FOOTSTRAPS
https://murrays.com/products/brunotti-gravity-pro-footpads
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Brunotti-Gravity-Pro-Footpads.png?v=1678309994
BRUNOTTI GRAVITY PRO FOOTPADS
Brunotti Gravity Pro Footpads
Murrays Part# 54-3603
The Brunotti Gravity Pro Footpads give you very good grip with your kiteboard. On the medium hard footbed, the Hexa Grip ensures that your feet cannot easily shoot out of the Gravity Pro Pads. The footbed has an edge where you can place your toes exactly for a really locked-in feeling. With the neoprene footstrap you can make the binding fit tightly to your feet. The strap can be adjusted with four Velcro straps.
https://murrays.com/products/clamcleat-kiteboarding-depower-cleat-micro
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/clamcleat-cl826-27-0826_bbe56f70-6e47-4fee-b614-5e710561e73c.jpg?v=1678309997
CLAMCLEAT KITEBOARDING DEPOWER CLEAT MICRO
The ClamCleat Kiteboardng depower cleat - Micro is the most trusted cleat in the kitebaording industry. ClamCleat has called it the Aero and Racer Back Cleat. The CL828 has been a stock item on many production kitebars since the inception of the sport, and is the most commonly used cleat on custom race bars. One of the great functions of this cleat is that it is easy to move up and down the sheeting line to adjust the bar throw and sheeting range. The black color is a Hard Anodized
https://murrays.com/products/comptip-hobie-bravo
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/BravoComptip.jpg?v=1739903329
HOBIE BRAVO COMPTIP
Hobie Bravo Comptip
Murrays Part# 50-90611001
Mast comptip for the Hobie Bravo mast assembly.
Hobie Part# 90611001
https://murrays.com/products/dakine-fly-wing-adjustable-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Dakine-Fly-Wing-line.png?v=1678310001
DAKINE FLY WING ADJUSTABLE LINE
Dakine Fly Wing Adjustable Line
Murrays part# 32-348800
The Dakine Fly Wing Adjustable Line is an adjustable line for winging. With a non-corrosive adjustable buckle and non-slip boom pads, this product is simple yet effective.
Attachment points open all the way up so they are easy to install on all wings.
Easy to install on wings with frim handles, webbing handles and booms.
Ideal on firm handles and booms because of the wide attachment point so it wont tear the handle grip.
Features:
Non-corrosive
https://murrays.com/products/dakine-hanger-wing-hook
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/hanger.png?v=1678310003
HANGER WING HOOK
Hanger Wing Hook
Murrays Part# 32-321130
Add this hook to your 2" webbing waist leash or use it to replace a lost hook from your Dakine harness. The hook lays flat and out of the way as you climb on your board.
https://murrays.com/products/dcore-3mm-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/dblack.jpg?v=1678310007
DCORE 3MM
https://murrays.com/products/d-cup-78kmix-8mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/39-4208bg_d704d596-b3f6-4635-a73b-f7d532218a0e.jpg?v=1678310009
D-CUP 78 KMIX 8MM
D-Cup 78 KMIX 8mm Black/Grey
Murrays Part# 39-4208bg
Double braid. 12 strand, coated Dyneema® Sk78 core, 24 plait mix HT Polyester / Cordura® cover.
https://murrays.com/products/downhaul-kit-3-1-wave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/wavedownhaulkit.png?v=1736276091
WAVE DOWNHAUL KIT 3:1
Downhaul Kit 3:1 Wave
Murrays Part# 001-2029
This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver.
This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.
https://murrays.com/products/duotone-kite-pump
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Duotone-XL-Kite-Pump.png?v=1678310012
DUOTONE XL KITE PUMP
The Duotone XL Kite Pump is all new and has a more flexible hose than ever. The XL pump pushes 3 liters of air per stroke which is significantly faster than a standard 2L pump, so you can get out on the water faster. The taller height also means you don't have to bend over as far while pumping, allowing a more ergonomic pumping action.
https://murrays.com/products/duotone-pump-adapter
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/pks_duotone_pump_adapter-1.jpg?v=1678310014
NORTH/DUOTONE VALVE ADAPTER
North/Duotone Valve Adapter
Murrays Part# 54-4401
This pump hose adapter works on all non Duotone/North pumps and makes them work with Duotone and North kites and wings. This part has two little locking nubs on the sides that are used to help lock it in place on the end of your pump hose. In the event that you don't have that feature on your hose, you can cut them with a box cutter or other small sharp blade.
Dontone kites and wings do not include a pump adapter
https://murrays.com/products/duotone-trust-bar-safety-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Duotone-Red-Safety-Line.jpg?v=1678310016
DUOTONE TRUST BAR SAFETY LINE 2016-22
Duotone Trust Bar Safety Line
https://murrays.com/products/eleveight-evolve-wing-foil-board
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Evolve-thumb.png?v=1678310019
ELEVEIGHT EVOLVE WING FOIL BOARD
The Eleveight Evolve Wing Foil Board is compact and dedicated to wing foiling. The Evolve board maximizes your session with an easy take-off then balance and stability once riding.
https://murrays.com/products/end-cap-fwd-blk-wave
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/39130021.jpg?v=1678310025
HOBIE WAVE FORWARD CROSSBAR END CAP
Hobie Wave Forward Crossbar End Cap
Murrays Part# 50-39130021
Replacement end cap for Hobie Wave forward crossbar.
Single cap
Works on forward crossbar of Hobie Wave
Hobie Part# 39130021
https://murrays.com/products/fanatic-sky-free-te
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Sky-free-te.jpg?v=1678310030
FANATIC SKY TEAM EDITION WINGFOIL BOARD
Our new Sky Free Team Edition was designed for riders looking for the easiest board to improve in wing foiling paired with the best technology, performance and weight out there!
https://murrays.com/products/fanatic-sky-style-te
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/fanatic_sky_style_te.jpg?v=1678310032
FANATIC SKY STYLE TE WINGFOIL BOARD
https://murrays.com/products/flag-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/flag1.jpg?v=1678310033
FLAG #1
https://murrays.com/products/flag-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/flag2.jpg?v=1678310036
FLAG #2
https://murrays.com/products/flag-3
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/flag3.jpg?v=1678310037
FLAG #3
https://murrays.com/products/flag-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/flag4.jpg?v=1678310039
FLAG #4
https://murrays.com/products/flag-a
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/a-flag.jpg?v=1678310039
FLAG A
https://murrays.com/products/flag-c
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/c-flag.jpg?v=1678310040
FLAG C
https://murrays.com/products/flag-h
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/h-flag.jpg?v=1678310042
FLAG H
Flag H
Murrays Part# 49-6006
The I flag pennant is used for marine signaling or race committee.
https://murrays.com/products/flag-i
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/iflag.jpg?v=1678310050
FLAG I
https://murrays.com/products/flag-l
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/l-flag.jpg?v=1678310044
FLAG L
https://murrays.com/products/flag-n
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/n-flag_bdfdbdbb-6e29-4b5a-9b4c-462d113d9529.jpg?v=1678310046
FLAG N
Flag N
Murrays Part# 49-6005
The N flag pennant is used for marine signaling or race committee.
https://murrays.com/products/flag-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Nacra-vlag-300x300-1.jpg?v=1678310047
NACRA FLAG
Nacra Flag
Murrays Part# 56-500302
https://murrays.com/products/flag-p
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/p-flag_c1504dbf-4cc0-446e-9753-216245d1411d.jpg?v=1678310048
FLAG P
https://murrays.com/products/flag-u
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/u-flag_2da1a1f5-5f1d-41c4-98a2-8c5c787860dc.jpg?v=1678310049
FLAG U
Flag U
Murrays Part# 49-6004
The U flag pennant is used for marine signaling and race committee.
https://murrays.com/products/f-one-1800-fct-gravity-wing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/FCT-1800-Wing_0c44e337-2da1-4fc3-906e-1de0eb9c849e.jpg?v=1678310069
F-ONE 1800 GRAVITY FTC FRONT WING
F-One 1800 FCT Gravity Wing
https://murrays.com/products/f-one-carbon-flow-fins-m
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/FLOW-M-CARBON-650x650-1.png?v=1678310073
F-ONE CARBON FLOW FIN SET-M
F-ONE Carbon Flow Fin Set-M
Murrays Part# 54-5102
The F-ONE surf fins have been developed to optimize the efficiency of our shapes.
Their outline, stiffness, and profile were designed specifically for surfing with a kite, which means different requirements than for prone surfing.
The FLOW series was developed for versatility and high performances over a wide range of conditions. Using the RTM construction paired with a carbon strip, the FINS FLOW CARBON generate more speed and deliver controlled flex
https://murrays.com/products/f-one-fct-2200-gravity-foil
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/GRAVITY-1800-alu.png?v=1678310093
F-ONE FCT 2200 GRAVITY FOIL
F-One FCT 2200 Gravity Foil
https://murrays.com/products/f-one-fct-1800-gravity-foil
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/GRAVITY-1800-alu_c0e806c1-e41b-42a7-bcbc-0d585d4b79df.png?v=1678310093
F-ONE FCT 1800 GRAVITY FOIL
https://murrays.com/products/f-one-foil-track-stopper
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Track-stopper1.png?v=1678310097
F-ONE RUBBER FOIL TRACKER STOPPER-PAIR
F-One Foil Track Stopper
https://murrays.com/products/f-one-high-modulus-carbon-mast-75cm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/carbon-mast-hm-650x650-2.png?v=1678310096
F-ONE 14MM HM CARBON MAST T1
The F-One 14mm HM Carbon Mast is a true masterpiece of composite craftmanship and design, the 75cm F-ONE HM CARBON MAST 14 will transform your foiling experience. Slice through the water and enjoy the purest glide with its ultra-thin profile, full Monobloc structure and High Modulus Carbon construction. Includes mast, mast head and mast foot covers.
https://murrays.com/products/f-one-mast-top-plate
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/F-One-foil-mast-TOP-PLATE.png?v=1678310102
F-ONE ALUMINUM MAST TOP PLATE
F-One Mast Top Plate
https://murrays.com/products/f-one-mini-pump
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/F-One-Mini-Pump.png?v=1678310101
F-ONE MINI PUMP
F-One Mini Pump
Murrays Part# 54-5019
The F-One Mini Pump has foldable feet and arms, perfect to travel or pack small in a kite bag or a wing bag.
https://murrays.com/products/f-one-mitu-pro-bamboo
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/mitu-pro-bamboo-650x650_1.png?v=1680040897
F-ONE MITU PRO BAMBOO
F-ONE MITU PRO BAMBOO
https://murrays.com/products/f-one-pocket-foil-board
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/54-5159.png?v=1678310105
F-ONE 120CM POCKET FOILBOARD
F-One Pocket Foil Board 120cm
https://murrays.com/products/f-one-titan-mast-foot
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/TITAN-MAST-FOOT-WINDSURF_895d577c-cb10-405a-b16d-d9e2584d5c52.png?v=1678310136
F-ONE TITAN MAST FOOT
F-ONE TITAN MAST FOOT
Murrays Part# 54-5110
The TITAN mast foot is the connecting part that makes the F-ONE aluminum masts compatible with all TITAN fuselages and wings. It is made of superior-grade aluminum 6061, CNC machined with high precision and fully anodized. To install the TITAN mast foot, it should be inserted into the bottom end of the aluminum mast and fastened with two M6x25mm tapered head screws.
https://murrays.com/products/f-one-torx-driver-t30
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/F-one-Torx-scaled.jpg?v=1678310135
F-ONE TORX DRIVER T30
F-One Torx Driver T30
https://murrays.com/products/forward-wing-harness-belt
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forward-WIP-Wing-Belt.jpg?v=1678310160
FORWARD WING HARNESS BELT
Forward Wing Harness Belt
Murrays part# 47-0640
The Forward Wing Harness Belt was designed specifically to be a minimalist wing foiling harness that can also be used as a leash attachment point. The ergonomic harness line hook easily engages and disengages the harness line. The hook slides on the belt to allow for comfortable toeside riding and can be pushed to the side for prone paddling. The Wing Belt also serves as a leash attachment point for your wing and or board leash.
https://murrays.com/products/forward-wing-harness-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forward-Wing-Line.jpg?v=1678310157
FORWARD WIP WING HARNESS LINE
Forward WIP Wing Harness Line
Murrays Part# 47-0641
Adjustable from 104 to 125cm
Simple, Durable and Ultra Light
Universal- Compatible with all wings
Reduces the load of the wing allowing you to extend your sessions
Forward Wing harness line is very easy to adjust and can be done on the water, they run the line thru itself which locks it when under load and allows it to be adjusted when slack. No tools or knots required to adjust the length.
https://murrays.com/products/forward-wip-batten-tensioners-with-gauge
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/47-8001.png?v=1706739183
FORWARD WIP BATTEN TENSIONERS WITH GAUGE-SET OF 6
Forward WIP Batten Tensioners with Gauge-Set of 6
Murrays Part# 47-8001
The Forward WIP Batten Tensioners with Gauge is a nice performance tuning tool for your RBS or Fiber Foam Batten set. Tensioner includes depth gauge to easily adjust tension and see exactly where you're at. This pack comes as a set of six tensioners. They are not available individually.
https://murrays.com/products/gooseneck-assy-h17-original
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50406231.jpg?v=1678310164
H-17 ORIGINAL GOOSENECK ASSEMBLY
H17 Original Gooseneck Assembly
Murrays Part# 50-50406201
https://murrays.com/products/h16-mast-head-sheave-old-style
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie-16-mast-head-sheave-old-style.png?v=1678310167
H-16 MAST HEAD SHEAVE-OLD SYLE
Hobie 16 Mast head sheave - Old Style
Murrays Part# 51-16041711
The Hobie 16 Mast head sheave - Old Style is the large plastic pulley sheave that replaces the sheave in the original all aluminum Hobie 16 mast. Requires a 3/8" x 1.5" clevis pin or bolt to install
Hobie 16 pre comptip masthead sheave. Measures 4 7/8" x 3/8" with a 3/8" hole.
https://murrays.com/products/h16-rigging-set-2009-spec
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie_16_rigging_package_2009_race_length.jpg?v=1761333622
H-16 RIGGING SET 2009 SPEC
Hobie 16 Rigging Set 2009 Spec
All parts needed for 2021 Race Ready Boat! If you're trying to update your old boat or just need new rigging for your late model Hobie 16, this is the complete package. Whether your racing or just putting around the lake, this kit is accommodates the current rigging standard for factory sails and production boats. All of our rigging is made from 316 stainless steel wire. Thimbles are swaged using our custom hydraulic swaging machine for years of reliable service.
https://murrays.com/products/h16-spinnaker-kit-bag
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/hobie-soft-bag_06bd3b96-554c-4b25-a778-412b0281a8fe.jpg?v=1678310171
H-16 SPINNAKER BAG KIT
Hobie 16 Spinnaker Kit Bag
https://murrays.com/products/harken-1250-high-load-traveler-car-with-aluminum-cam
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_579fde99-d0a5-4d53-b1e5-d02e39cf487d.jpg?v=1718656770
HARKEN 22MM HIGH-LOAD 1250 CAR-PIVOTING SHEAVES, SWIVEL CAM
Harken 22mm High-Load 1250 Car-Pivoting Sheaves, Swivel Cam
Murrays Part# 28-2766
The Harken 1250 High Load Traveler Car With Aluminum Cam is a replacement main traveler car for the Hobie 20 and most Nacra catamarans. It has captive bearings works with the 2003 and newer track and can be adapted to be used on the older non captive ball tracks used prior to 2003.
https://murrays.com/products/harken-h16-race-carbo-6-1-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-61P-scaled.jpg?v=1678310174
HARKEN H-16 RACE 6:1 MAIN SHEET SYSTEM
Harken H16 Race 6:1 Main Sheet System
Murrays Part# 28-61p
The 6:1 Race Mainsheet System is a low profile mainsheet system is super light weight and allows for maximum mast rake.
The base block is the 57mm Harken Carbo Ratchamatic from our regular 6:1 system with a 40mm carbo triple on the top. The Harken 57mm base block has a load sensing ratcheting system to help hold the line when it is under tension.
https://murrays.com/products/harken-40mm-carbo-fiddle-block-with-camcleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2657.jpg?v=1678310174
HARKEN 40MM FIDDLE BLOCK- SWIVEL, CAM CLEAT
Harken 40mm Fiddle Block -Swivel, Cam Cleat
Murrays Part# 28-2657
Harken's Carbo fiddle block features high-load ball bearings with fitted races for low-friction operation. The 40 mm fiddle is an excellent choice for a Hobie® 20 barber hauler block, for 3:1 and 4:1 tackles on dinghy vangs and mainsheets, as well as for controls such as cunninghams and internal boom outhauls on larger boats.
https://murrays.com/products/hat-leash
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Surf_Hat_Leash.jpg?v=1725656252
SURF HAT SAFETY RETAINER
Overhead Surf-Cap-Safety Retainer
Murrays Part# 54-4413
The Hat Leash is finally here! New from Overhead Surf is the Cap-Safe Retainer lanyard. Simply attached to your hat or cap and ensures that if it does get blown off your head, it stays with you. Total hat saver!! Now featuring a breakaway snap on the leash so it wont try to rip your head off if the hat gets caught on something.
Features:
Break away snap connection
Hook/Loop for hat connection
https://murrays.com/products/hatch-6-twist-n-seal
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71701011.jpg?v=1678310177
6" TWIST-N-SEAL HATCH
https://murrays.com/products/hobie-16-black-mesh-trampoline-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/20970055-black-mesh-tramp.jpg?v=1678310177
H-16 MESH TRAMPOLINE-BLACK
H16 Mesh Trampoline-Black
Murrays Part# 50-20970055
Hobie factory black mesh trampoline for Hobie 16 is heat-welded for easy maintenance and a long life. Heat-welding lasts longer in the sun than trampolines that are stitched at the seams. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Legal for Hobie class racing.
Hobie Part# 50-20970058
https://murrays.com/products/hatch-8-twist-n-seal
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/77800020-71702011.jpg?v=1678310178
8" TWIST-N-SEAL HATCH
8" Twist-N-Seal Hatch
Murrays Part# 50-71702011
Twist-n-seal hatches have a better seal. The lids also hinge open, so you never lose the lid. Designed with a cork-screw-like mechanism for closure, a simple twist of the handle opens or closes the hatch. As the screw pulls down the hatch, you get a tight seal on the Ring.
https://murrays.com/products/hobie-16-grey-mesh-trampoline-oem
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/20970059-grey-mesh-tramp.jpg?v=1678310179
H-16 MESH TRAMPOLINE-GREY
Hobie 16 Grey Mesh Trampoline OEM - Hobie Part #20970058
https://murrays.com/products/hobie-16-jib-sail-mistral
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-2099.png?v=1725647198
H-16 JIB SAIL (MISTRAL)
H16 Mistral Jib Sail
Murrays Part# 50-209920611
This is an OEM Hobie 16 Jib Sail with the Mistral Pattern. This is class legal for Hobie One Design Racing or colorful recreational fun!
Hobie Part# 209920611
https://murrays.com/products/hobie-16-jib-traveler-car-and-pulley
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-21380000.jpg?v=1678310181
HOBIE 16 JIB TRAVELER CAR AND PULLEY
Hobie 16 jib traveler car 21380000, jib sheet block, slider, control...
https://murrays.com/products/hobie-16-main-sail-mistral
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-209910611.png?v=1725646964
H-16 MAINSAIL (MISTRAL)
https://murrays.com/products/h-16-super-flex-jib-batten-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-0122.jpg?v=1678310184
MURRAYS H16 SUPER FLEX JIB BATTEN SET
Hobie 16 Super Flex Jib Batten Set Hobie part number 0122
https://murrays.com/products/hobie-16-tramp-cover
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/H16-tramp-cover-2.jpg?v=1678310188
MURRAYS H-14/16 TRAMPOLINE COVER
Murrays Hobie 16 Trampoline Cover
https://murrays.com/products/hobie-16-trampoline-blue
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-3102-2.jpg?v=1678310185
H-16 3-PIECE TEFLON TRAMPOLINE-BLUE
Hobie 16 turquoise mesh trampoline Hobie 20970058
https://murrays.com/products/hobie-18-main-batten-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3050.jpg?v=1719506190
H-18 MAIN FIBERGLASS BATTEN SET
Compare to Hobie part number 62000001 - Hobie 18 Main Battens
https://murrays.com/products/hobie-getaway-jib-bora-bora
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/hobie-Getaway-Bora_5f6cbb2e-1268-4f0f-997b-5fd7f5fef551.png?v=1678310189
GETAWAY JIB (BORA BORA)
Hobie Getaway Jib-Bora Bora
Murrays Part# 50-379920781
Description:
Bora Bora / Chartreuse colorway Jib for the Hobie Getaway made from 6 oz Dacron. Compatible with any Hobie Getaway sailboat.
6 oz heavy duty Dacron sail cloth for long term durability.
Standard on all new Hobie Getaway sailboats starting in 2021.
Hobie Part# 379920781
https://murrays.com/products/hobie-getaway-main-sail-bora-bora
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/hobie-Getaway-Bora_2ec9f70c-dd66-4651-940e-fc339791fc96.png?v=1678310190
GETAWAY MAINSAIL (BORA BORA)
Hobie Getaway Main Sail-Bora Bora
Murrays Part# 50-379910781
Description:
Updated Bora Bora colorway mainsail for the Hobie Getaway. This is the sail included on all new production boats and can be used on any year Getaway.
https://murrays.com/products/hobie-getaway-mesh-trampoline
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/37970055.jpg?v=1738191940
HOBIE GETAWAY 2001-16 MESH TRAMPOLINE-BLACK
Getaway Mesh Trampoline 2001-16
Murrays Part# 50-37970055
The Hobie factory replacement Hobie Getaway Mesh Trampoline is heat welded for longevity. Class legal for Hobie racing.
https://murrays.com/products/hobie-h18-main-sail-coronado
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60991086.png?v=1678310194
H-18 MAINSAIL (CORONADO)
H18 Main Sail (Coronado)
Murrays Part# 50-60991086
Coronado color pattern Hobie factory mainsail.
Hobie Part# 60991086
https://murrays.com/products/hobie-race-course-sticker
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/45-1002.jpg?v=1678310193
RACE COURSE STICKER
Race Course Sticker
Murrays Part# 45-1002
The course chart sticker with all the Hobie race courses on it. Put one on each side of your crossbar for quick and easy reference while sailing,
https://murrays.com/products/hobie-wave-ez-loc-tiller-arm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39382011_1_z181.jpg?v=1726096764
WAVE EZ LOC TILLER ARM
Wave EZ Loc Tiller Arm
Murrays Part# 50-39382011
This is the current stock tiller arm for the Hobie Wave. It is part of the EZ Loc Assembly. This will not work with the older H18, H17, H20 Rudder casting system.
Hobie Part# 39382011
https://murrays.com/products/jib-batten-pocket-protector-w-screws
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-22080011.jpg?v=1678310199
HOBIE JIB BATTEN POCKET PROTECTOR WTH SCREWS
Hobie Jib Batten Pocket Protector with Screws
Hobie part number 22080011
https://murrays.com/products/joey-bottle-holder
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/133620_2_1024x1024_2x_3e7f4fbd-0834-4327-b730-28dcd225c829.jpg?v=1678310205
ROOSTER JOEY BOTTLE HOLDER
Neoprene sleeve bottle holder with adjustable webbing straps at each end to fit around different circumferences of tube. Can be attached to parts in the boat to store drinks when sailing. The bottle holder features an oval hole to be able to slide the bottle in with one hand. Can fit up most bottle up to 1L in size.
https://murrays.com/products/kissme-jib-traveler-car-and-pulley
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Kissme-Jib-traveler-1.jpg?v=1678310204
KISME "OK" JIB TRAVELER CAR AND PULLEY
Kissme Jib Traveler Car and Pulley
https://murrays.com/products/lacing-rod-gtwy-main-64-3-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37880011.jpg?v=1678310202
GETAWAY MAIN LACING ROD 64-3/4"
Getaway Main Lacing Rod 64-3/4"
Murrays Part# 50-37880011
This is the lacing rod that is used to tension the main trampoline on the Hobie Getaway.
Hobie Part# 37880011
https://murrays.com/products/line-package-f16-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/32151.jpg?v=1678310206
NACRA F16 LINE PACKAGE
https://murrays.com/products/m6-x-25mm-titanium-hydrofoil-screws
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/M6-x-25mm.jpg?v=1678310214
M6x25MM TITANIUM HYDROFOIL SCREWS
M6 x 25mm Titanium Hydrofoil Screws
Murrays Part# 55-0025T
The M6 x 25mm Titanium Hydrofoil Screws are stronger and more corrosion resistant than stainless steal foil hardware. Compatible with all M6 foil track inserts. The 25mm length is used for both board to foil connection as well as foil assembly. Commonly used with F-One, Naish, Airush, Takuma, Axis, Sab foil, Armstrong and more. Titanium foil hardware does not require greasing or regular checking. Titanium does not corrode or seize
https://murrays.com/products/m8-x-25mm-titanium-hydrofoil-screws
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/M8-25mm.jpg?v=1678310210
M8x25mm TITANIUM TORX BOLT
Murrays M8 x 25mm Titanium Hydrofoil Screws
https://murrays.com/products/m8-x-30mm-titanium-hydrofoil-screws
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/M8-30mm_2aa6bfc6-cd6c-40b0-9938-b1eec8544682.jpg?v=1678310211
M8x30mm TITANIUM TORX BOLT
https://murrays.com/products/mast-bravo-lower-t-f
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/murrays-h16-main-batten-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Brighter-Batten-set.jpg?v=1719506393
H-16 MAINSAIL FIBERGLASS BATTEN SET
Murrays Hobie 16 Main Batten Set
https://murrays.com/products/murrays-h16-one-piece-rudder-gudgeon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50102011M-Top.jpg?v=1678310237
MURRAYS H-16 ONE PIECE RUDDER GUDGEON
The Murrays Hobie 16 one piece rudder gudgeon is not cast but machined and then anodized for superior strength and longevity.
Compare to Hobie 50102011
https://murrays.com/products/murrays-hobie-20-drain-plug
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Murrays-Hobie-20-Drain-Plug.jpg?v=1678310237
MURRAYS H-20 DRAIN PLUG
MURRAYS HOBIE 20 DRAIN PLUG
https://murrays.com/products/mystic-6-surf-leash
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-6-Surf-Leash.png?v=1678310238
MYSTIC 6' SURF LEASH
Mystic 6' Surf Leash
Murrays Part# 57-1729780
The Mystic 6' Surf Leash was mainly designed for kite surfing and wing foiling and will ensure that you don't lose your board in the water! This board leash sits snug around your ankle.
Features:
- HD 8mm Tubing
- Ankle cuff
- Swivels on both ends
https://murrays.com/products/mystic-adjustable-headband
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Adjustable-Headband.jpg?v=1678310243
MYSTIC ADJUSTABLE HEADBAND-GREY
Mystic Adjustable Headband-Grey
Murrays Part# 57-1639744
Keep your hair out of your face and your ears warm with the Mystic Adjustable Headband.
3mm Neoprene headband for warmth and function.
https://murrays.com/products/mystic-ambush-mid-front-deck-pad
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/mystic-Ambush-back-all-over-mid.png?v=1678310245
MYSTIC AMBUSH MID AND FRONT DECK PAD-BLACK
The Mystic Ambush Mid + Front Deck Pad is a front foot deck traction pad for kite surfboards and features their Gecko Grip texture for maximum grip with a low profile. It works on all type and sizes of boards. The 6 piece front foot deckpad has holes in the center to allow for footstraps if desired. The Ambush deck pad has 3m peel and stick adhesive in it for easy installation and a secure adhesion.
https://murrays.com/products/mystic-ankle-straps
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Ankle-Straps.jpg?v=1678310246
MYSTIC ANKLE STRAP SET
Mystic Ankle Strap Set
Murrays Part# 57-14221
Ever get water shooting up into your wetsuit leg? Keep it out with the Mystic Ankle strap. Light, durable Velcro strap secures wetsuit ankles to prevent water from getting in and getting trapped.
https://murrays.com/products/mainsail-fiberglass-batten-42-107
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Short_yellow_batten_with_black_luff_cap.jpg?v=1719506598
H-16 MAINSAIL FIBERGLASS BATTEN 107"
104" Hobie batten part number 21000001
https://murrays.com/products/mystic-asymmetrical-footstraps
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Asymetrical.jpg?v=1678321491
MYSTIC ASYMMETRICAL FOOT STRAPS
The Mystic Asymmetrical Footstraps are adjustable footstraps that are ideal for foiling, windsurfing and kiting. Asymmetrical footstraps offer a right and left contoured shape for the best fit. Most commonly used for front footstraps in a 3 footstrap configuration where you have separate port and starboard front footstraps and a shared rear center strap. Also used as a rear footstrap on a windsurfers that don't share the same footstrap for riding in both directions.
https://murrays.com/products/mystic-classic-ambush-tailpad
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Classic-Ambush-tailpad.jpg?v=1678321491
MYSTIC CLASSIC AMBUSH TAIL PAD-BLACK
he Mystic Classic Ambush Tailpad is a rear traction pad for kite surfboards and features their Gecko Grip texture for maximum grip with a low profile. The classic shape is designed for boards with narrow tails like squash, pin and rounded pin tail boards. The tailpad has holes in the center to allow for footstraps if desired. The Ambush tailpad has 3m peel and stick adhesive in it for easy installation and a secure adhesion.
https://murrays.com/products/mystic-classic-guard-tailpad
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Gaurd-Classic-Tailpad.jpg?v=1678321494
MYSTIC CLASSIC GUARD TAIL PAD-BLACK
Mystic Classic Guard Tailpad - Black
Murrays Part# 57-1640610
The Mystic Classic Guard Tailpad is a rear traction pad for kite surfboards and features their 3D Grip texture for maximum grip. The classic shape is designed for boards with narrow tails like squash, pin and rounded pin tail boards. The tailpad has holes in the center to allow for footstraps if desired. The Guard tailpad is a 3 piece set with 3m peel and stick adhesive for easy installation and secure adhesion.
https://murrays.com/products/mystic-elastic-uphaul
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Elastic-Uphaul.jpg?v=1678321498
MYSTIC ELASTIC UPHAUL
Mystic Elastic Uphaul
Murrays part# 57-119980
The Mystic Elastic Uphaul is a windsurfing uphaul line for retrieving the mast out of the water.
Features
Elastic tubular webbing
Soft padding
Elastic loop
Fixed loop
https://murrays.com/products/mystic-foil-wing-bag
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Foil-Wing-Bag.jpg?v=1678321499
MYSTIC WING FOIL COVER
Mystic Foil Wing Bag
Murrays Part# 57-1653788
The Mystic Foil Wing Bag is a soft neoprene cover for your assembled Hydrofoil wings.
Features:
Wing protector for daily use
Versatile shape for multiple foil types
Super stretch neoprene with cord adjusters
Double neoprene protection layer in front and back
Quick and easy assembly - not sensitive to salt sand and water
Materials:
Neoprene (100%)
Specs:
84 x 66 x 55cm and 1.7lbs
https://murrays.com/products/mystic-kite-compression-bag
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/COMPRESSION-BAG-KITE.jpg?v=1678321507
MYSTIC KITE COMPRESSION BAG-BLACK
The Mystic Kite Compression Bag is a lightweight packable kite bag. Compression bags are great for getting more kites into your travel bags. Compression bags both reduce weight and size from standard kite bags. They are lighter than standard kite bags and they reduce the size of your kites for easy transport. They are also great for minimalists who don't want t carry big kite backpacks around. The digital 88 on the front allows you to indicate the size of the kite on the bag.
https://murrays.com/products/mystic-kite-pump-extreme
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/MYSTIC-KITE-PUMP-EXTREME.jpg?v=1715126514
MYSTIC KITE PUMP EXTREME-BIG PUMP
Full size kite pump with smooth pumping action for quick easy kite inflation. 2 way pumping action with a switch to change it to one way. Compatible with most kites on the market, includes 6 inflation adapters.
https://murrays.com/products/mystic-luggage-hand-scale
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Luggage-Hand-Scale.jpg?v=1678321509
MYSTIC LUGGAGE HAND SCALE
The Mystic Luggage Hand Scale is small, light, packable and will help you not go over the weight limit when traveling with your kiteboarding gear.
Features
Digital weight display
Up to 50kg (110lbs) capacity
LED overweight indicator (adjustable)
https://murrays.com/products/mystic-marshall-footstraps
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Marshall-straps.png?v=1678321521
MYSTIC MARSHALL FOOTSTRAPS (AK ELEMENT FOOTPAD)
The Mystic Marshall footstraps are a super comfortable and secure connection to your board. With multiple mounting positions, the Marshall Footpads offer you adjustment to get to the perfect stance for your riding style. With a duel molded footbed, the Marshall footpads offer you a cushy landing no matter how hard you are pushing the limits.
https://murrays.com/products/mystic-mast-base-pad
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Mast-Base-Pad.jpg?v=1678321525
MYSTIC MAST BASE PAD
Mystic Mast Base Pad
https://murrays.com/products/mystic-pro-uphaul
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Pro-Uphaul-lime.jpg?v=1678321535
MYSTIC PRO UPHAUL-LIME
https://murrays.com/products/mystic-safety-knife
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Safety-Knife.jpg?v=1678321541
MYSTIC SAFETY KNIFE
Mystic Safety Knife
Murrays part# 57-1637092
The Mystic Safety Knife is a hook knife used for cutting kite lines or harness webbing in an emergency situation. It comes with a pocket that can be easily mounted to a harness for easy access and quick deployment.
https://murrays.com/products/mystic-star-impact-vest
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Star-Impact-Vest.jpg?v=1678321549
MYSTIC STAR IMPACT VEST-BLACK
Mystic Star Impact Vest - Black
The Mystic Star Impact Vest features a front YKK zipper and a is very low profile so it can easily fit with any kiteboarding harness.
Features
CE approved
YKK Side-zip
Clash foam
Non-padded harness waist part
Zipper lock
Please note: This is not a floatation device / buoyancy aid
Materials
M-Flex (75%)
https://murrays.com/products/mystic-stealth-webbing-connector
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/webbing-connector.jpg?v=1678321554
MYSTIC STEALTH WEBBING CONNECTOR
The Mystic Stealth Webbing Connector is a replacement piece for Mystic Stealth Spreader Bars. It is the piece the connects the harness webbing to the spreader bar. They are included with all Stealth Spreader bars but can get lost or break in extreme situations
https://murrays.com/products/mystic-stubby-ambush-tailpad
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Ambush-Stubby-Tailpad.png?v=1678321558
MYSTIC STUBBY AMBUSH TAIL PAD-BLACK
Mystic Stubby Ambush Tailpad
https://murrays.com/products/mystic-surf-clickerbar-4-0
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Surf-Clickerbar-4.0.jpg?v=1678321562
MYSTIC SURF CLICKERBAR 4.0
The Mystic Surf Clickerbar 4.0 features a surf style sliding rope connection. The bar is equipped with the well known clicker system that offers a strong and solid connection.
The Surf Clicker bar does not have the wings like the Stealth bars, meaning it may slide up a little more, but the rope does not rotate the bar upwards like fixed hooks do. And without the wings it works on pretty much any harness available today. The Surf Clickerbar is compatible with all Mystic and Dakine Harnesses.
https://murrays.com/products/mystic-symmetrical-footstraps
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Symetrical_3a2f07d5-165e-45b6-95ff-f8c4d6c4cf73.jpg?v=1678321564
MYSTIC SYMMETRICAL FOOT STRAPS
Mystic Symmetrical Footstraps
Murrays part# 57-1637085
The Mystic Symmetrical Footstraps are ideal for foiling, windsurfing and kiting. Symmetrical footstraps are adjustable and can be used from both sides. These footstraps are most often mounted in the middle of a board and used for riding in both directions.
Features Wide pre-shaped footstrap
Easy adjust external adjustable Velcro strap Symmetrical design
Soft molded foam
Sold as a pair
https://murrays.com/products/mystic-windsurfing-footstrap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Windsurfing-Footstrap-Black.jpg?v=1678321585
MYSTIC WINDSURFING FOOTSTRAP
The Mystic Windsurfing Footstrap is a universal footstrap with an internal sizing adjustment system and 3 holes per side for mounting with 1 or 2 screws.
https://murrays.com/products/nacra-furler-tang-upper
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30296.jpg?v=1678321594
NACRA TANG FURLER UPPER
Nacra Furler Tang Upper
Murrays Part# 56-30296
To connect your forestay with your furler system.
Compatibility:
Nacra 500
Nacra 460
Nacra 570
Nacra Part# 30296
https://murrays.com/products/nut-3-8-16-hx-nylock-lp
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8050540.jpg?v=1678321601
NUT 3/8-16" HX NYLOCK-LP
Nut 3/8-16 HX Nylock-LP
Murrays Part# 50-8050540
https://murrays.com/products/o-ring-6-twist-n-seal
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71701021.jpg?v=1678321602
6" TWIST-N-SEAL GASKET
6" Twist-N-Seal Gasket
Murrays Part# 50-71701021
Twist-N-Seal Gaskets have a better seal. The lids also hinge open, so you never lose the lid. Designed with a cork-screw-like mechanism for closure, a simple twist of the handle opens or closes the hatch. As the screw pulls down the hatch, you get a tight seal on the Ring. The round hatch seals around the edge of the cylinder and does not have to be held down against a flat surface to seal.
https://murrays.com/products/powerstick-cork-ball-grip-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Powerstick-Cork-Ball-Grip-Kit.jpg?v=1678321606
1.5" POWER STICK CORK BALL GRIP KIT
Powerstick Cork Ball Grip Kit
https://murrays.com/products/prindle-19-tiller-arm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-5009.jpg?v=1678321607
PRINDLE 19 TILLER ARM
P-19 Tiller Arm
Murrays Part# 56-5009
https://murrays.com/products/prindle-rudder-refresh-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Prindle-rudder-breakdown.png?v=1678321615
PRINDLE RUDDER REFRESH KIT
https://murrays.com/products/rivet-4-8-csk-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8010050.jpg?v=1678321621
RIVET 4-8 CSK ALUMINUM
Rivet 4-8 CSK Aluminum
Murrays Part# 50-8010051
Rivet pop 1/8x1/2 -AL
Hobie Part# 8010051 or 8010050
https://murrays.com/products/rivet-6-18-aluminum
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8010050_50a04733-c779-4daa-95e5-caec9e9736aa.jpg?v=1678321621
RIVET 6-18 ALUMINUM
Rivet 6-18 Aluminum RIVET POP 3/16 x 1 1/8th inch aluminum rivet to hold the traveler control sheave on a H16 front crossbar from late 90s to current. Hobie Part Number 8011251
https://murrays.com/products/rivet-fastener-tool-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-C324.jpg?v=1678321623
CLOSING TOOL FOR D331
https://murrays.com/products/ronstan-40mm-orbit-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-48100.webp?v=1719338548
RONSTAN SERIES 40 BALL BEARING ORBIT BLOCK, SINGLE, SWIVEL
Ronstan Series 40 Ball Bearing Orbit Block, Single, Swivel
Murrays Part# 21-48100
The Ronstan Orbit 40mm Block with ball bearings provide the perfect balance of strength, performance, and reliability. They offer class-leading dynamic and static load ratings, the highest available in this size of performance blocks. Lightweight and strong toughened glass fiber reinforced nylon cheeks replace stainless steel straps used in traditional utility blocks - the perfect balance of performance and reliability.
https://murrays.com/products/ronstan-40mm-orbit-lashing-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-48109.jpg?v=1678321633
RONSTAN SERIES 40 BALL BEARING ORBIT BLOCK, LASHING SNATCH BLOCK
https://murrays.com/products/ronstan-40mm-orbit-triple-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-48300.webp?v=1719339531
RONSTAN SERIES 40 BALL BEARING ORBIT BLOCK, TRIPLE, SHACKLE HEAD
https://murrays.com/products/ronstan-8mm-s-hook
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Ronstan-S-hook.jpg?v=1678321634
RONSTAN S HOOK, 8MM (5/16")
Ronstan S-Hook, 8mm (5/16")
Murrays Part# 21-0049
The Ronstan 8mm S-Hook features a closed eye and long return leg to ensure a positive attachment and avoid accidental release.
316 Stainless Steel, 8mm diameter bar
Ronstan Part# RF49
https://murrays.com/products/rope-splicing-fid-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/0000-1.jpg?v=1678321640
ROPE SPLICING FID KIT
Rope Splicing Fid Kit
Murrays Part# 001-1400
The Murrays Rope Splicing Fid Kit includes 9 fids from 1.7 to 5mm that can splice 1 - 6 mm diameter lines. It includes everything you need for small boat use. It can make tapered sheeting lines, split lines, halyards, looped ends, soft shackles, you name it. The kit includes everything you need to cut, splice and finish the job all contained in a water tight box for easy storage.
https://murrays.com/products/rotation-casting-h21sc
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/rudder-blade-p18-2-p19-round-tip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4225.png?v=1678321645
P18.2/19 ROUND TIP RUDDER BLADE
P18-2/19 Round Tip Rudder Blade
Murrays Part# 56-4225
This is the newer blade with the rounded tip as pictured.
https://murrays.com/products/rudder-bumper-hobie-20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/unnamed-2-scaled_271e7a3b-8d7f-4aa1-9371-fa54bc6c8dcc.jpg?v=1678321647
H-20 RUDDER BUMPER
H20 Rudder Bumper
Murrays Part# 006-190807
The Rudder Bumper Hobie 20 is the wedge that mounts under the the lower casting on a Hobie 20 to prevent the rudders from turning too far into the hull and risking the tiller x-bar inverting. This also prevents stress on the hulls from the rudder casting slamming into it. This part mounts with a bolt and nut rather than a course thread screw like the original part.
https://murrays.com/products/sail-bag-snufferring
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/download.jpg?v=1678321664
NACRA SNUFFERRING SAIL BAG
Snufferring Sail Bag
Murrays Part# 56-31851
https://murrays.com/products/sail-bravo-3-8-oz-martiniq
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/90990022.jpg?v=1678321665
BRAVO MAINSAIL (MARTINIQUE)
Bravo Mainsail (Martinique)
Murrays Part# 50-90990022
Official Hobie Cat mainsail in Martinique colorway for the Hobie Bravo. Made from heavy weight Dacron for years of active use.
Martinique colorway - White, Yellow, Orange, Red
3.8 oz
Hobie Part # 90990022
https://murrays.com/products/sail-bravo-3-8oz-seabreeze
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/90990021.jpg?v=1678321669
BRAVO MAINSAIL (SEABREEZE)
Bravo 3.8oz Sail (Seabreeze)
Murrays Part# 50-90990021
Official Hobie Cat mainsail in Martinique colorway for the Hobie Bravo. Made from heavy weight Dacron for years of active use.
Hobie Part # 90990021
https://murrays.com/products/sandbag-wing-anchor-murrays
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/wing-anchor2-scaled.jpg?v=1678321670
MURRAYS WING ANCHOR SANDBAG
Murrays Wing Anchor Sandbag
Murrays Part# 001-7000
The sandbag wing anchor is a simply product that you can fill with sand at the beach and tie or otherwise attach your wing leash to, to keep your wing secure. The handle is easy to carry and the double zipper will keep the sand inside. It's a great way to keep your wing secure while you suit up, rig up your board, or take a break.
https://murrays.com/products/screw-10-x-1-2-phsms-p
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8031151.jpg?v=1678321671
SCREW #10X1/2" PHSMS-P
Screw #10 x 1/2 PHSMS-P
Murrays Part# 50-8031151
Hobie Part# 8031151
https://murrays.com/products/screw-10-x-1-1-4-phsms-p
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8030261.jpg?v=1678321672
SCREW #10 x 1-1/4 PHSMS-P
Screw #10 x 1-1/4 PHSMS-P
Murrays Part# 50-8030261
Tiller Hinge Screw for Hobie Fiberglass Tiller.
https://murrays.com/products/screw-10-x-3-4-phsmph
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8031131.jpg?v=1678321672
SCREW #10 x 3/4 PHSMPH
Screw #10 x 3/4 PHSMPH
Murrays Part# 50-8031131
https://murrays.com/products/screw-10-x-3-4-phsm-ph-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8031131-1.jpg?v=1678321674
SCREW STAINLESS STEEL #10 x 3/4 PHSM-PH
https://murrays.com/products/screw-10-32-x-1-1-4-phmsp
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8031071.jpg?v=1678321675
SCREW 10-32 X 1-1/4" PHMSP
Screw 10-32 X 1-1/4" PHMSP
Murrays Part# 50-8031071
https://murrays.com/products/screw-3-8-16-x-4-phms-p
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8040600.jpg?v=1678321676
SCREW 3/8-16 x 4" PHMS-P
Screw 3/8-16 x 4" PHMS-P
Murrays Part# 50-8040600
This screw is for holding the wing side leg brace.
Hobie Part# 8040600
https://murrays.com/products/sealed-rivet-ccp-6-4-3-16-x-1-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/stainless-sealed-pop-rivet.jpg?v=1678321678
RIVET CCP SEALED 6-4 (3/16 X 1/4)
Hobie Cat 8010181 Rivet
https://murrays.com/products/sealed-rivet-ccp-6-6-3-16-x-3-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/stainless-sealed-pop-rivet_8765ff35-6a28-4de6-8e5a-597c6a7a0d1d.jpg?v=1678321679
RIVET CCP SEALED 6-6 (3/16 X 3/8)
Sealed Stainless Steel 3/16" x 3/8"
Pan Head Rivet
Murrays Part# 19-5032S
Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed.
Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified:
Hobie 14 (2) or 16 (4) mast head
Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4)
Hobie 14/16
https://murrays.com/products/sealed-rivet-ccp-6-8-3-16-x-1-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/stainless-sealed-pop-rivet_c776be2c-9f98-4a08-bc8f-0bdf93813b16.jpg?v=1678321679
RIVET CCP SEALED 6-8 (3/16 X 1/2)
Sealed Rivet CCP 6-8 (3/16 X 1/2)
Murrays Part# 19-5033S
Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed.
Sealed Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231 Rivet and Hobie Cat® #8011291 rivet casing.
https://murrays.com/products/slide-slug-h17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50504101.jpg?v=1678321679
H-17 SLIDE SLUG
H17 Slide Slug
Murrays Part# 50-50504101
Slide Slug attaches to the sail and fits the boom track
Big slug for smooth action
Stainless steel bail makes sail attachment simple
Molded in weld gives maximum strength
https://murrays.com/products/soft-grip-std-extension-570-x-11
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/32061z204.jpg?v=1678321682
SOFT GRIP STANDARD EXTENSION .570 x 11"
Soft Grip Standard Extension .570 x 11"
Murrays Part# 007-3206
This is a grip upgrade for the standard Hobie Tiller extension, it will also fit the Murrays fixed tiller extension as well.
Hobie Part# 3206
https://murrays.com/products/ssr-light-racing-sheet-8mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/39-4108_932f9fd5-1a96-4842-a477-5adcb4512aa3.jpg?v=1678321682
5/16" SSR LIGHT RACING SHEET 8MM
Alpha SSR Light Racing Sheet 8mm
https://murrays.com/products/ssr-racing-sheet-5mm-red
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/39-4005r-1.jpg?v=1678321683
13/64" SSR RACING SHEET 5MM
Alpha SSR Racing Sheet 5mm Red
https://murrays.com/products/stohlquist-squeeze-lock-fixed-blade-knife
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Stohlquist_SqueezeLock_Yellow-1.jpg?v=1678321686
STOHLQUIST SQUEEZE LOCK FIXED BLADE KNIFE
https://murrays.com/products/tef-gel-hydrofoil-hardware-lubricant
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/55-0005_20cc.jpg?v=1740597118
TEF-GEL HYDROFOIL HARDWARE LUBRICANT
https://murrays.com/products/tiller-arm-getaway-ez-loc
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/37382011.jpg?v=1678321688
HOBIE GETAWAY EZ LOC TILLER ARM
Hobie Getaway EZ Loc Tiller Arm
Murrays Part# 50-37382011
Replacement tiller arm for Hobie Getaway sailboat with EZ Loc style rudders.
Hobie Part# 37382011
https://murrays.com/products/top-wip-3ds-neo-2-5mm-s
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/1.-3DS-NEO-TOP-3MM.jpg?v=1678321694
FORWARD WIP TOP - SMALL
https://murrays.com/products/torqeedo-charging-cable-12-24v
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/1128.jpg?v=1678321692
TORQEEDO CHARGING CABLE 12/24V
Torqeedo Charging Cable 12/24V
Murrays Part# 71-1128
Enables charging from a 12V/24V power source. For models Travel 603/1003/1103 and Ultralight 403. Length: 2 m / 79 inch
https://murrays.com/products/torqeedo-charger-90-w-for-travel-and-ultralight-batteries
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/1133.jpg?v=1678321692
TORQEEDO CHARGER 90W FOR TRAVEL AND ULTRALIGHT BATTERIES
https://murrays.com/products/torqeedo-motor-1103cs
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1151.jpg?v=1678321695
TORQEEDO MOTOR 1103CS
https://murrays.com/products/torqeedo-motor-603
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/1153-00-travel-603-1-510x510-1.jpg?v=1678321697
TORQEEDO MOTOR 603
https://murrays.com/products/torqeedo-propeller-v10-p1100
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/1972-1.jpg?v=1678321697
TORQEEDO PROPELLER V10/P1100
https://murrays.com/products/torqeedo-spare-propeller-v10-p1100-travel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/1973.jpg?v=1678321700
TORQEEDO SPARE PROPELLER V10/P1100 TRAVEL
https://murrays.com/products/torqeedo-travel-battery-500wh-for-603
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1148.jpg?v=1678321698
TORQEEDO TRAVEL BATTERY 500WH FOR 603
Torqeedo Travel Battery 500wh for 603
Murrays Part# 71-1155
High-performance lithium battery with integrated GPS receiver.
500Wh
29.6 V
31 Ah
2 Year Warranty
Equipment included: Battery with USB adapter
This battery is for the Travel 603 Motors. It will also work with the Travel 503 motors. This battery is also compatible with the Travel 1003 and Travel 1103 motors, but the output of the motor will be reduced to a 2hp equivalent.
https://murrays.com/products/torqeedo-travel-battery-915w-for-603-and-1103
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/71-1148_68d82867-d6b4-4402-9257-1732cdaab23f.jpg?v=1678321701
TORQUEEDO TRAVEL BATTERY 915W/603/1103 WITH USB PORT
https://murrays.com/products/torx-tool-l-t30
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/t30-torx-L.jpg?v=1678321702
TORX TOOL L T30
Torx Tool L T30
Murrays Part# 001-7001
This is a basic Stainless steel Torx Tool, T30 is the size. Standard size for F-One foil hardware and a number of other foil screws using the M6 screws. This tool is small and fits in a pocket or spare bits pouch well.
https://murrays.com/products/trampoline-getaway-forward-black-oem-2017-present
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/37981755.jpg?v=1679515367
GETAWAY FORWARD TRAMPOLINE 2017-PRESENT
Getaway Forward Trampoline 2017-Present
Murrays Part# 50-37981755
Hobie® factory replacement forward trampoline for Getaway. For lacing, order 15 feet of 3/16 line #39-2311BK.
https://murrays.com/products/trampoline-getaway-forward-black-oem-2001-2016
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/37980055.jpg?v=1679514849
GETAWAY FORWARD TRAMPOLINE 2001-2016
Getaway Forward Trampoline 2001-2016
Murrays Part# 50-37980055
https://murrays.com/products/trapese-wire-nacra-17-18inf-f18evo-double
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30238.jpg?v=1678321704
NACRA 17/18INF/F18EVO DOUBLE TRAPEZE WIRE
https://murrays.com/products/trapeze-wire-nacra-500-double
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30283.jpg?v=1678321704
NACRA 500 DOUBLE TRAPEZE WIRE
Nacra 500 Double Trapeze Wire
Murrays Part# 56-30283
https://murrays.com/products/trapeze-wire-nacra-f18-inter18-570-double
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30238_9514c14d-e629-44dc-adf9-ae0433184eab.jpg?v=1678321705
NACRA F18/INTER18/570 DOUBLE TRAPEZE WIRE
Nacra F18/Inter18/570 Double Trapeze Wire
Murrays Part# 56-30238
Nacra f18/I18/570 trapeze wire double, is a double wire for the F18, Inter 18 and the Nacra 570.
The trapeze wire double is provided with a t-handle, for easy grip. Good to know, one trapeze wire double is good for one side of the boat. Therefore, when you are looking for a complete set, ordering two pieces is necessary.
Nacra Part#30238
https://murrays.com/products/trimstar-control-line-3mm-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/39-4403bk-1.jpg?v=1678321705
TRIMSTAR CONTROL LINE 3MM
Trimstar Control Line 3mm Black
https://murrays.com/products/trimstar-control-line-4mm-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/39-4404bk-1.jpg?v=1678321707
TRIMSTAR CONTROL LINE 4MM
Trimstar Control Line 4mm Black
Murrays Part# 39-4404bk
Double braid: Braided 16 strand HT Polyester core, HT Polyester cover.
Trimstar Control Line is a durable control line with good grip.
Ideal for halyards, downhaul, outhaul, cunningham,
https://murrays.com/products/trimstar-control-line-4mm-yellow
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/39-4404y-1.jpg?v=1678321709
TRIMSTAR CONTROL LINE 4MM
Trimstar Control Line 4mm Yellow
Trimstar Control Line 4mm Yellow
Trimstar Control Line 4mm Yellow
Double braid: Braided 16 strand HT Polyester core, HT Polyester cover.
Trimstar Control Line is a durable control line with good grip.
Ideal for halyards, downhaul, outhaul and cunningham
https://murrays.com/products/ultraneema-control-line-5mm-blue
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Ultraneema-control-line-5mm-Blue.jpg?v=1678321710
ULTRANEEMA CONTROL LINE 5MM
Ultraneema Control Line 5mm Blue
Murrays Part# 39-4305bl
https://murrays.com/products/washer-5-16-x-9-16-flat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8080181.jpg?v=1678321713
WASHER FLAT 5/16 X 9/16"
Washer 5/16 X 9/16 Flat
Murrays Part# 50-8080181
Hobie Part# 8080181
https://murrays.com/products/waterproof-sports-bag-lightweight-60l-by-magic-marine
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/waterproofsportsbag.jpg?v=1678321713
WATERPROOF SPORTS BAG LIGHTWEIGHT 60L
Waterproof Sports Bag Lightweight 60L by Magic Marine
https://murrays.com/products/wichard-quick-release-shackle-2-75
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Wichard-Quick-Release-Shackle.jpg?v=1678321715
WICHARD QUICK RELEASE SNAP SHACKLE WITH SWIVEL EYE
Wichard Quick Release Snap Shackle with Swivel Eye
Murrays Part# 27-2673
Wichard Snap Shackles are forged in High Resistant 17-4PH (HR) Stainless Steel. Wichard snap shackles will never break suddenly! They show signs of deformation well before reaching the breaking point.
https://murrays.com/products/wipper-2-0-ear-covers
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/wipper2.0earcover.jpg?v=1678321715
FORWARD WIPPER 2.0 EAR COVERS
Forward Wipper 2.0 Helmet Ear Covers
https://murrays.com/products/xl-gust-evo-sunglasses
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/1.GUSTevo2022-XL-Blue.jpg?v=1678321723
FORWARD GUST EVO SUNGLASSES - XL
Forward XL Gust Evo Sunglasses
https://murrays.com/products/yoke-getaway-forestay
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/37810030.jpg?v=1678321717
GETAWAY FORESTAY YOKE
Hobie Getaway Forestay Yoke
Murrays Part# 50-37810030
This is part of the forestay assembly that hooks up to the main shackle on the mast.
Hobie Part# 37810030
https://murrays.com/products/mystic-clickerbar-5-0
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Clickberbar-5.0-Spreaderbar.jpg?v=1678322088
MYSTIC 5.0 CLICKERBAR
https://murrays.com/products/mystic-coiled-board-leash
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Mystic-Coiled-board-leash.jpg?v=1680905952
MYSTIC COILDED BOARD LEASH 10FT
Mystic Coiled Board Leash
Murrays Part# 57-1729834
The Mystic Coiled Board Leash is ideal for those who want a leash that does not drag in the water while Surfing, Suping, Winging or Foiling.
Features:
- HD 8mm Tubing
- Calf cuff
- Available in 8' and 10' lengths
- Swivels on both ends
https://murrays.com/products/n5-8-na-forestay-5-32-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Forestay_Nacra-255x300.jpg?v=1736535145
N-5.8NA FORESTAY 5/32" BLACK WIRE
N5.8 North American Forestay 5/32" Black Wire
Murrays Part# 002-4545-12NA
The Nacra 5.8 forestay is constructed to factory specifications from 5/32" black-coated wire.
Their are 2 versions of the Nacra 5.8. The standard 5.8 which is mostly found in Europe and N.A. which is the North American version
https://murrays.com/products/stud-maststep-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/null_img.jpg?v=1682493286
HOBIE GETAWAY MAST STEP STUD
Hobie Getaway Mast Step
Murrays Part# 50-37170001
Mast step assembly for the Hobie Getaway. Attaches to the front cross bar.
Hobie Part# 37170001
https://murrays.com/products/re-simple-wing-harness-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/null_img_5f5b0e3f-8861-4a53-81da-9fc2220564d2.jpg?v=1700511174
RIDE ENGINE SIMPLE WING HARNESS LINE
The Ride Engine RE Simple Wing Harness Line is strong, durable, and simple. This water wing harness line can be used wings that have webbing or pigtails attachment points. It also features three knot hitch adjustment for tuning the harness line length.
Features:
Strong Dyneema rope
Knotted adjustment
https://murrays.com/products/re-the-nug
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/54-5523.png?v=1714579164
RIDE ENGINE NUG
Ridengine Nug
Murrays part# 54-5521
The Ridengine Nug is a universal wing harness sliding hook that can be mounted on virtually all wing harnesses available today.
Simple, easy to use wingsurf harness line hook that is adaptable to any webbing waist leash or webbing slider harness.
https://murrays.com/products/re-3-2l-macro-pump
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/null_img_3b9e5952-e652-47a2-bd9d-819eb07504ca.jpg?v=1700511179
RIDE ENGINE 3.2L MACRO PUMP
The Ride engine 3.2L Macro Pump is the biggest kite pump on the market today! 3.2 liters of air per stroke as compared to 2.9L tall kite pumps.
https://murrays.com/products/re-wing-surf-harness-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/54-5529.png?v=1680905264
RIDE ENGINE WING HARNESS LINE
The Ridengine Wing Harness line is compatible with all wings and the length can be adjusted by moving the knots in the internal line located on the backside of the loops.
This harness line works on all wing handle configurations. The webbing loops on the wing harness line are great for booms and handles because they hold the harness line in place and disperse the load so that they do not damage the grip on your handles.
https://murrays.com/products/re-adjustable-wing-harness-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/54-5530.png?v=1680905178
RIDE ENGINE ADJUSTABLE WING HANESS LINE
Ride Engine Adjustable Wing Harness Line
Murrays Part# 54-5530
Those pigtails or webbing loops on your wing are there for a purpose! The Ride Engine Adjustable Wing Harness Line is easy to apply and transfer from wing to wing with the carabiner connection and features an easy pull-strap adjustment for reach and varied pigtail or webbing spread dimensions.
Features
Webbing pull tab adjustment
Quick connect and disconnect carabiner interface
PU-coated harness line
https://murrays.com/products/h14-turquoise-mesh-trampoline
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10970058.jpg?v=1679960772
H-14 MESH TRAMPOLINE-TURQUOISE
H14 Mesh Trampoline-Turquoise
Murrays Part# 50-10970058
Turquoise color heavy duty mesh trampoline for the Hobie 14. These are the gold standard for catamaran trampolines with pocket and reinforced grommet points.
Hobie Part# 10970058
https://murrays.com/products/nacra-evolution
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/F18-Evo.png?v=1685741286
NACRA F18 EVOLUTION
https://murrays.com/products/open-skiff
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/open_skiff_complete_1400x1400_2.png?v=1696344311
O'PEN SKIFF STD BOAT
https://murrays.com/products/sunfish-race-boat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/WhiteRecreationalSail.jpg?v=1706555732
SUNFISH RACE BOAT
Sunfish Race Boat
Murrays Part# 68-SunfishRace
The Sunfish is a great recreational boat! We don't have boats in stock at this time, but should have them later in the year. Reach out to pre-order your boat!
https://murrays.com/products/hobie-wave-4-1-main-sheet-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-041-57B_4_1_sheeting_system.jpg?v=1748986063
HARKEN 4:1 MAIN SHEET SYSTEM
Harken 4:1 Main Sheet System
Murrays Part# 28-041-57b
The Murrays Hobie low profile 4:1 main sheet system for the Hobie Wave and Hobie 14. By Adding a fairlead and a singel block to the back side of the cleat on the base block we have made a low profile main sheet system.
https://murrays.com/products/wave-pintle-upper
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-38101301.jpg?v=1701365132
HOBIE WAVE/GETAWAY UPPER PINTLE - PRE EZ LOC
Hobie Pre EZ Loc Upper Pintle
Murrays Part# 50-38101301
Replacement upper pintle assembly for Hobie Wave and Hobie Getaway sailboats using the pre EZ loc style rudder assembly.
Original Equipment on Hobie Wave and Hobie Getaway sailboats
Upper pintle should be mounted with two (2) screws
Use Part# 8030171 for boats 2008 and older, or Part# 8030331 for 2009 and newer
If you have an EZ Loc style assembly, use the Hobie EZ loc upper pintle part# 90880211
Hobie Cat Part # 38101301
https://murrays.com/products/tiller-end-cap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-10560000.jpg?v=1701448539
HOBIE TILLER END CAP
Hobie Tiller End Cap
Murrays Part# 50-10560000
Replacement end cap for Hobie tillers.
https://murrays.com/products/a-frame-attach-new-style-5-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-90711011.jpg?v=1701457535
HOBIE BRAVO A FRAME CONNECTOR - - Discontinued
Hobie Bravo A Frame Support with Strap
Murrays Part# 50-90711011
Replacement A frame support with strap for Hobie Bravo.
https://murrays.com/products/bravo-knob-assembly-mast-gate
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-90502031.jpg?v=1701457851
HOBIE BRAVO MAST GATE KNOB ASSEMBLY
Hobie Bravo Mast Gate Knob Assembly
Murrays Part# 50-90502031
Replacement Hobie Bravo mast gate knob assembly.
https://murrays.com/products/bravo-sail-bag
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-90992000.jpg?v=1701460830
HOBIE BRAVO SAIL BAG
Hobie Bravo Sail Bag
Murrays Part# 50-90992000
Store your Hobie Bravo mainsail in this convenient heavy duty bag.
https://murrays.com/products/hobie-18-mast-base-hinge
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-60650011M.jpg?v=1704435165
H-18 MAST BASE HINGE
Hobie 18 Mast Base Hinge casting
60650011
https://murrays.com/products/stay-adjuster-1-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/02-1049-1.jpg?v=1704475282
STAY ADJUSTER 1/8"
https://murrays.com/products/nacra-6-0-jib-halyard-with-shackle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/N6.0-6.0-NA-Jib-halyard-with-shackle_35bef637-5724-42c6-881b-b105e82104c8.jpg?v=1704488246
N-6.0 JIB HALYARD WITH SHACKLE
N6.0 Jib Halyard with Shackle
Murrays Part# 002-4683-50
Jib halyard with shackle for Nacra 6.0 is constructed to factory specifications.
https://murrays.com/products/rear-mast-support-with-v-stainless-steel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/13-3002.jpg?v=1730407170
REAR MAST SUPPORT WITH "V"
Rear Mast Support with "V"
Murrays Part# 13-3002
https://murrays.com/products/murrays-black-tell-tail-set-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-3825.jpg?v=1704993725
MURRAYS TELL TAIL SET
Murrays Tell Tails Pack of 16
Murrays PN 001-3825
Black ripstop nylon tell-tales attach to the sail with adhesive patches to visually aid in trimming the sail. Compatible with both the main and jib sails.
Set includes:
6 x pairs of Black tell tails
4 x Black Leech tell tails
https://murrays.com/products/nut-nylock-10-24-stainless-steel-thin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/19-2510.jpg?v=1705079315
NUT NYLOCK #10-24 (SS) THIN
Nut Nylock #10-24 Stainless Steel Thin
Murrays Part#19-2510
Stainless hex nut with nylock insert will not rust or work loose if properly installed.
https://murrays.com/products/powerstick-yoke
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-134-4.jpg?v=1705622160
POWERSTICK YOKE
Powerstick Yoke
Murrays Part# 001-134-4
Replacement Powerstick tiller yoke
https://murrays.com/products/us-sabot-line-package
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-39USlines_US_Sabot_line_package.png?v=1754676235
US SABOT LINE PACKAGE SBSS
US Sabot Line Package SBSS
Murrays Part# 001-39US
Includes the following lines:
Painter
Mainsheet
Outhaul
Traveler
Cunningham
3 vang lines
Dagger hold down
https://murrays.com/products/murrays-race-half-harness
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/IMG_1393-e1524765707128.jpg?v=1706293502
MURRAYS RACE HALF HARNESS-NO SPREADER BAR
Back by popular demand the Murrays Race Half Harness is perfect for recreational sailors and racers alike looking for a light weight, comfortable half harness. The Murrays Half Harness is a seat harness designed specifically with the Catamaran sailor in mind. The Murrays Half harness features internal battens to provide an amazing amount of back support with a low profile harness. This Butt Bucket style harness is compatible with the Magic Marine quick release hook system or the Murrays Ball Lock trapeze
https://murrays.com/products/roller-furling-rig-kit-h20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-48921001_f90ad776-7c14-4fa9-9212-d02b1f0dcbee.jpg?v=1708626646
H-20 ROLLER FURLING RIGGING KIT
https://murrays.com/products/boom-upper-complete-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/SUN-89415-228x228.jpg?v=1741019461
SUNFISH UPPER BOOM
Sunfish Upper Boom
Murrays Part# 68-89415
This aluminum upper boom comes pre-installed with boom caps for a complete and ready-to-use setup.
Specifications:
Material: Aluminum
Length: 13’8″
Outer Diameter: 1 1/2″
Includes boom caps
https://murrays.com/products/boom-lower-complete-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/SUN-89414-228x228.jpg?v=1741019294
SUNFISH LOWER BOOM
Sunfish Lower Boom
Murrays Part# 68-89414
This aluminum lower boom is designed for race-ready performance, featuring pre-installed boom caps and mainsheet blocks for a complete setup.
*Please note the gooseneck is not included.*
Specifications:
Material: Aluminum
Length: 13’8″
Outer Diameter: 1 1/2″
Includes boom caps and mainsheet blocks.
https://murrays.com/products/boom-lower-race-complete-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/SUN-89413-228x228.jpg?v=1741019139
SUNFISH LOWER BOOM RACE
Sunfish Lower Boom Race
Murrays Part# 68-89413
This aluminum lower boom is designed for race-ready performance, featuring pre-installed boom caps, mainsheet blocks, and cleats for a complete setup.
*Please note the gooseneck is not included.*
Specifications:
Material: Aluminum
Length: 13’8″
Outer Diameter: 1 1/2″
Includes boom caps, mainsheet blocks and cleats.
https://murrays.com/products/mast-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/SUN-89023-228x228.jpg?v=1741018820
SUNFISH MAST
Sunfish Mast
Murrays Part # 68-89023
This aluminum mast comes pre-installed with upper and lower mast cap for a complete and ready-to-use setup.
Specifications:
Material: Aluminum
Length: 10’
Outer Diameter: 2 1/4″
Includes both upper and lower cap
https://murrays.com/products/gooseneck-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/null_img_f1d1f215-b357-4bae-8576-591aef6f646f.jpg?v=1706552515
SUNFISH GOOSENECK ASSEMBLY
Sunfish Gooseneck Assembly
Murrays Part# 68-90638
Classic bronze gooseneck designed for securely attaching the lower boom to the mast.
Features:
Made from durable bronze for strength and longevity
Provides a secure and adjustable connection between boom and mast
Traditional design for a classic rigging setup
A reliable component for smooth sail control and proper boom positioning.
Don’t forget the quick adjust lever for quick and easy adjustments!
https://murrays.com/products/quick-adjuster-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/QuickAdjuster.jpg?v=1706555421
SUNFISH QUICK ADJUSTER LEVER
Sunfish Quick Adjust Lever
Murrays Part# 68-90563
Easily adjust the position of your lower boom with this quick-adjust lever. No wrenches required!
Features:
Tool-free adjustment for convenience
Allows quick boom positioning
A must-have for efficient and hassle-free sail tuning.
https://murrays.com/products/sail-ties-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/null_img_a45e057e-02b8-4090-937a-bf5c637190bc.jpg?v=1706552519
SUNFISH SAIL TIES
Sunfish Sail Ties
Murrays Part# 68-L61D029
Secure your sail with this durable and lightweight sail ties, made from 2mm Dyneema® SK78 for exceptional strength and minimal stretch.
Designed for easy rigging and a secure hold, this kit is a must-have for Sunfish sailors looking for reliability on the water!
https://murrays.com/products/sail-ring-pack-30-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/SailRings.png?v=1706556028
SUNFISH SAIL RINGS (30)
Sunfish Sail Rings
Murrays Part# 68-95880
Secure your sail with these durable sail rings, designed to fit around the booms and clip onto the sail for a reliable hold.
Features:
Package Includes: 30 sail rings
Color: Clear
Perfect for keeping your sail in place and ensuring smooth sailing!
https://murrays.com/products/daggerboard-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/68-85028.jpg?v=1732062853
SUNFISH DAGGERBOARD
Sunfish Daggerboard
Murrays Part# 68-85028
This fiberglass Sunfish daggerboard is fits all years of Sunfish.
Features:
Fiberglass construction
Compatible with all years of Sunfish
This is a recreational daggerboard that is not ISCA class certified for racing.
https://murrays.com/products/stopper-set-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/null_img_e58127bb-be04-4497-a7cc-21216f7af9c5.jpg?v=1706552521
SUNFISH DAGGERBOARD STOP SET
Sunfish Daggerboard Stop Set
Murrays Part# 68-85334
The plastic stop set prevents the daggerboard from dropping through the hull, ensuring it stays securely in place while sailing.
Helps maintain proper daggerboard positioning.
Prevents accidental lowering beyond the intended depth.
Durable plastic construction for long-lasting use.
An essential component for effective daggerboard control.
https://murrays.com/products/rudder-blade-sf
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/SUN-10021-625x625.jpg?v=1740785399
SUNFISH RUDDER BLADE
Sunfish, Rudder Blade
Murrays Part# 68-85122
Class-legal rudder blade designed to mate with the rudder head for smooth and reliable steering.
Features:
Lightweight yet durable construction
Does not include rudder cheek or mounting hardware
Class legal for racing
A high-quality replacement for maintaining optimal rudder performance.
https://murrays.com/products/tiller-and-extension-sf
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/SUN-85210-625x625.jpg?v=1740785948
SUNFISH ALUMINUM TILLER ASSEMBLY
Sunfish Aluminum Tiller Assembly
Murrays Part# 68-85210
This aluminum tiller and extension is designed to fit all rudders, providing smooth handling and a responsive feel for your boat.
Includes: 44″ aluminum tiller and 36″ tiller extension
Comes with the bolt 85009 for secure rudder attachment
Lightweight and durable aluminum construction
Provides excellent control and maneuverability
https://murrays.com/products/hiking-strap-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/null_img_388f15a8-2926-424c-9c25-457877a7405f.jpg?v=1706552523
SUNFISH HIKING STRAP
Sunfish Hiking Strap
Murrays Part# 68-91138
This padded hiking strap is designed for maximum comfort while hiking, fitting both old and new Sunfish models.
Features:
Made by Rooster for quality and durability
Features a unique rubber compound with a high coefficient of friction for better grip
Lightweight and durable construction for long-lasting use
Pro Plus Range includes rubber added to the bottom for enhanced stability
A great choice for sailors looking for improved comfort and control on the
https://murrays.com/products/deck-cover-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/DeckCover.png?v=1706556258
SUNFISH MAST DOWN DECK COVER
https://murrays.com/products/bailer-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/null_img_12998ba8-cdb7-4f1c-9c28-fd984d89f21d.jpg?v=1706552526
SUNFISH AUTO BAILER
Sunfish Auto Bailer
Murrays Part# 68-91026
The bailer is mounted at the bottom of the cockpit and automatically drains excess water, helping to keep the cockpit dry. It can be easily opened and closed using the rubber cap.
Features:
Fits newer style Sunfish models (1973-present)
13/16″ thread length, which refers to the length of the cap
Designed for efficient drainage and easy operation
A reliable replacement for maintaining proper cockpit drainage.
https://murrays.com/products/bow-handle-sf
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Sunfish_Parts-11.jpg?v=1715121364
SUNFISH BOW HANDLE
Sunfish Bow Handle
Murrays Part# 68-91026A
The Metal Bow Handle is a sturdy and reliable deck-mounted accessory designed to make lifting, carrying, and maneuvering your boat effortless.
https://murrays.com/products/bridle-2-loop-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/null_img_3f0f87dd-0e9b-41a4-ae57-ed0a0d0bb693.jpg?v=1706552530
SUNFISH TWO LOOP BRIDLE
Sunfish Two Loop Bridle
Murrays Part# 68-91122
This two loop bridle provides a secure attachment point for the aft end of the mainsheet, allowing the boom to swing smoothly and evenly from side to side. Made from stainless steel cable with a protective plastic coating, it features two loops that connect to the eye straps on the deck for a strong and durable setup.
Features:
2-loop design for balanced boom movement
Stainless steel cable with plastic coating for durability
https://murrays.com/products/gudgeon-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/null_img_7353a6b1-8446-4564-8821-e274afa73023.jpg?v=1706552532
SUNFISH GUDGEON BRACKET
Sunfish Gudgeon Bracket
Murrays Part# 68-91054
The gudgeon bracket bolts to the transom of the SOL or Sunfish, providing a secure mounting point for the rudder head.
Features:
Made from stainless steel for durability and corrosion resistance
Provides a strong and long-lasting attachment for the rudder
Essential component for proper rudder installation
Built to withstand the elements, ensuring reliable performance on the water.
https://murrays.com/products/coaming-sunfish
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/SUN-91080-625x625.jpg?v=1740788216
SUNFISH COAMING
Sunfish White Coaming
Murrays Part# 68-91080
The coaming on the Sunfish is designed to help deflect waves and spray, keeping the cockpit drier while sailing.
Features:
Color: White
Provides protection from water splashing into the cockpit
Durable construction for long-lasting use
A functional part for a more comfortable sailing experience.
https://murrays.com/products/sunfish-recreational-boat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Recreational_Sunfish.jpg?v=1715127222
SUNFISH RECREATIONAL BOAT
Sunfish Recreational Boat
Murrays Part# 68-SunfishREC
The Sunfish is a great recreational boat! We don't have boats in stock at this time, but should have them later in the year. Reach out to pre-order your boat!
https://murrays.com/products/halyard-pouch-5x9-asst-color
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/31-1401-1.jpg?v=1706652042
HALYARD 5"X9" ZIP POUCH- ASSORTED COLORS
Halyard 5"X 9" Zip Pouch-Assorted Colors
Murrays Part# 31-1400
The Murrays 5" x 9" zippered halyard pouch is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the tramp lacing. The off-center zipper is designed for easy stuffing of your boat's halyard. The pouch is also handy for storing replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A.
Compare to Hobie Cat® stow bag #72000B and 7
https://murrays.com/products/zip-pouch-5x12-assort-color
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/31-1401-1_d4d0fb64-fb78-4f40-8c73-1bc7a0212484.jpg?v=1706652075
5"X12" ZIP POUCH-ASSORTED COLORS
5"X12" Zip Pouch-Assorted Colors
Murrays Part# 31-1401
The Murrays Zip Pouch 5"X12" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A.
Compare to Hobie Cat® stow bag #72000B and 72005B
https://murrays.com/products/zip-pouch-7x17-assort-color
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/31-1402-1.jpg?v=1706652197
7"X17" ZIP POUCH-ASSORTED COLORS
7"X17" Zip Pouch-Assorted Colors
Murrays Part# 31-1402
The Murrays Zip Pouch 7"X17" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A.
Compare to Hobie Cat® stow bag #72000B and 72005B
https://murrays.com/products/comp-tip-cover-hobie-16-20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/comptip-cover.jpg?v=1706716163
H-16/18/20 COMP-TIP COVER
Comp-Tip Cover: H-16/18/20
Murrays Part# 31-2441
Hobie Cat recommends that CompTips on Hobie 16, 17, 18 and 20 be covered to protect them from ultraviolet light. Top quality polyester material is treated for UV-resistance and provides much better and long-lasting protection than nylon covers. Highly visible, red-tip reinforced end. Cover ties to mast with included line.
https://murrays.com/products/hs-5-hd-hand-swager-1-16-3-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/null_img_cb3026f7-9458-4afa-90f5-3744240acc7b.jpg?v=1706689060
HS-5 HD HAND SWAGER 1/16-3/16
https://murrays.com/products/selma-rope-splice-fids-x5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/33-0032-2_Selma_fid_kit.jpg?v=1734388923
SELMA ROPE SPLICE FIDS x5
Selma_fid_kit 4.5mm-13mm
https://murrays.com/products/kainui-12x-5-16-w-clp-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/32-1270-2.jpg?v=1706717162
DAKINE KAINUI LEASH 12'
Dakine Kainui Leash 12'
Murrays Part# 32-332919
Dakine Kainui Leash 12' has a maximum strength 5/16" urethane cord with overmolded leash ends and double swivels. It also features a quick-release 2" cuff, triple-wrap rail saver and a key pocket in the cuff. Pull the easy-clip release for quick release in an emergency.
https://murrays.com/products/posi-lock-buckle-repair-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/dakine_posi_lock_buckle_and_webbing_repair_kit.jpg?v=1706716708
DAKINE POSI-LOCK BUCKLE REPAIR KIT
Dakine Posi Lock Repair Kit
Murrays part# 32-147865
Dakine's Posi-Lock Buckle Kit includes Posi-Lock buckles and webbing. Replacement part for all Dakine harnesses with the Posi Lock system. Dakine NRG and Dakine Thermo Form / T-Series harnesses T1-T9 and newer Classic series T harnesses. Dakine #4200800.
Includes: Posi-lock webbing and buckles
https://murrays.com/products/power-belt-extender
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/uphaul-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/null_img_a5d7d870-ed46-4839-914a-7770f8760376.jpg?v=1706689062
DAKINE UPHAUL-BLACK
Dakine Uphaul-Black
Murrays Part# 32-487787
The DaKine uphaul makes uphauling easier! Dakine's durable, tubular nylon webbing has an internal bungee system that holds tight to the mast. 52" (132cm) long. Sold individually.
Windsurfing Uphaul: Simply attach one end to the mast base and the other to the boom head, and then you can easily reach the uphaul from any position to aid retrieving the mast out of the water.
DaKine Part# 4200700
https://murrays.com/products/slim-footstrap-florida-blue
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/32-344081.png?v=1706716807
DAKINE SLIM FOOTSTRAP-FLORIDA BLUE
Murrays part# 32-344081
The DaKine Slim footstrap has a simple, lightweight and comfortable design. Great for both kitesurfing and windsurfing. Designed for use on Foilboards and strapped surfboards alike. Users will love the minimal light weight design, flexibility, and support of the Slim footstraps.
https://murrays.com/products/aquaseal-75oz-tube
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38-1910.png?v=1706716521
AQUASEAL .75oz (TUBE)
https://murrays.com/products/h21se-bridle-5-33
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/pins-rings-kit-hobie-wave-getaway
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/IMG_2070.jpg?v=1676953199
WAVE AND GETAWAY PINS & RINGS KIT
The Murrays Pins & Rings Kit: Hobie Wave + Getaway includes the most often used spare clevis pins and split rings for the Hobie Wave and Hobie Getaway. Compare to Hobie Part # 30302
https://murrays.com/products/dakine-wing-hook-with-pad
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Dakine-Hanger-hook-woth-pad-1.png?v=1707244006
DAKINE WING HOOK WITH PAD
Dakine Wing Hook With Pad
https://murrays.com/products/dakine-front-foot-surf-pad
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/32-330571_02c473e9-d050-4c9b-ae53-99d4ce5b1e45.jpg?v=1715127616
DAKINE FRONT FOOT PADS- BLACK
Dakine Front Foot Pads
Murrays Part# 32-330571
The Dakine Front Foot Pads give you secure traction for your front foot, whether you're trying plant more tricks, or stay on top of your board coming out of monster barrels, you can't argue with the advantage of two-foot traction. This updated pad features low profile grip pattern and cut outs, giving you maximum grip while still letting you feel the board under your feet. Like all of our traction pads, it features 3M® high grade adhesive.
https://murrays.com/products/mystic-harness-handle-pass-loop
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/88631_6dca3ed8ca21660f004c2e21e5df50afed9539fc.png?v=1707512083
MYSTIC HANDLEPASS LOOP - XS/S
Mystic Handlepass Loop - Small
Murrays Part# 57-1367678
Size: Small
The Handlepass Loop is made of Dyneema rope and covered in rubber for easy pulling and sliding. It is attached easily to the buckles of the webbing on your harness, designed for freestyle riders who want to unhook and perform handlepasses. The Handlepass Loop comes attached with the Mystic softshell harnesses.
https://murrays.com/products/nsi-surf-pad-system
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/54-9066.jpg?v=1707527001
NSI SURF PAD SYSTEM WITH INSERTS
https://murrays.com/products/copy-of-m8-t-nuts-stainless-steel-hydrofoil-mast-track-inserts
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/55-0011T-titaniumM8hydrofoilt-nuts.jpg?v=1707952532
TITANIUM M8 T-NUT: HYDROFOIL MAST TRACK INSERTS
M8 T-Nuts: Titanium Hydrofoil Mast Track Inserts
https://murrays.com/products/m6-t-nuts-stainless-steel-hydrofoil-mast-track-insert
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/M6-foil-track-insert-t-nut-slide.jpg?v=1708017453
STAINLESS STEEL M6 T-NUT
M6 T-Nuts: Stainless Steal Hydrofoil Mast Track Inserts slides foil
https://murrays.com/products/copy-of-m6-t-nuts-stainless-steel-hydrofoil-mast-track-insert
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Titaniumm6masttrackinsertslidet-nut_174dfbb7-bcb2-432e-b167-847dbb79c89d.jpg?v=1715127666
TITANIUM M6 T-NUT: HYDROFOIL MAST TRACK INSERTS
Titanium M6 T-Nut
https://murrays.com/products/m8x16mm-ss-t40-torx-bolt-4-pack
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/55-0013_2.jpg?v=1708045076
M8x16MM FLAT HEAD BOLT SS
M8 x 15mm Phillips Head Hydrofoil Bolt
The M8-16 mm Allen Head Hydrofoil Bolts are used on F-One ASC Boards with foils that require a 8mm bolt. It's always good to have an extra set on hand, in case you loose some. Made of corrosion resistant 316 stainless steal.
https://murrays.com/products/eleveight-os-v3-14m
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/OS-V3-RED.png?v=1708129058
ELEVEIGHT OS V3 14M KITE PACKAGE
Eleveight OS V3 kite - 14m
https://murrays.com/products/foil-impact-hat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/vebodi-2023-surf-impact-hat-1.jpg?v=1708381197
SURF AND FOIL IMPACT HAT
A Multi-Sport / Water / Reef Helmet Hat. Purposely designed for Indo Surfing, Kitesurf, kiteboarding, Windsurf, Sailing, Kayaking & Wingboarding. It has a Hard protective shell for light / medium impacts. Non-water absorbent Foam with Water Proof Lining built for Flex Comfortability
https://murrays.com/products/copy-of-downhaul-scale
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-2306-Harken-calibration-strip.png?v=1708381677
HARKEN CALIBRATION STRIP
Harken Calibration Strip
Murrays Part# 28-2306
This handy, self-stick scale takes the guesswork out of setting the downhaul. The scale is marked in 1/2" increments to 10". The sticker can also be used as an outhaul scale, or jib track measurement guide.
Features both vertical and horizontal numbers so it can be used on the mast or the crossbar.
https://murrays.com/products/rwo-quick-release-spreader-bar
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/R4028.jpg?v=1708383688
6" QUICK RELEASE HOOK SPREADER BAR
RWO Quick Release Spreader Bar
https://murrays.com/products/manera-wing-hook
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/54-2058.png?v=1715127688
MANERA WING HOOK
Manera Wing Hook
Murrays part# 54-2058
You think winging doesn’t require a harness, until you get a taste of free flying. Then you want to go upwind as much as possible and enjoy the feeling of gliding downwind effortlessly.
Our WING HOOK will help you do just that. It is adaptable to any wing harness/leash belt that has a 50mm large front strap.
https://murrays.com/products/murrays-wire-line-splicer-for-1-2mm-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/02-0001.jpg?v=1708387225
MICRO D-SPLICER SPLICING NEEDLE
Micro D-Splicer Splicing Needle
Murrays Extra Small Line Splicer for 1-2mm line
The Murrays Extra Small Line Splicer for 1-2mm line is designed to splice really small diameter lines. It is ideal for making kiteboarding line sets.
Material: 316 stainless wire and a copper/nickel end stop
Length: 6"
https://murrays.com/products/f-one-pump-adapter
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/54-4411.jpg?v=1708470739
NAISH/CORE/F-ONE AND FLYSURFER PUMP ADAPTER
Naish/Core/F-One and Flysurfer
Pump Adapter
Murrays Part# 54-4411
The New PKS Universal V2 Valve adapter for Naish, Flysurfer, F-One, Core kites. Works with Reactor Valve, Speed 2.0 Valve, Free Flow Valve and Surelock Valves.
https://murrays.com/products/murrays-deluxe-sail-bag
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Murrays-Deluxe-Sail-Bag-3.jpg?v=1767814413
MURRAYS DELUXE SAIL AND BOOM BAG
Murrays Deluxe Sail and Boom Bag - Will fit any Hobie sail, compatible with all Nacra and Prindle sails as well. The Hobie 16 has the widest sail of any Hobie and at a width of 109″
https://murrays.com/products/f-one-10cm-wrist-leash-extender
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/target600_ece7c935__IMG_0386.jpg?v=1708476594
F-ONE WRIST LEASH EXTENDER 10CM
F-One 10cm Wrist Leash Extender
https://murrays.com/products/dakine-foil-crush-footstrap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Dakine-Foil-Crush-footstrap.png?v=1708728267
DAKINE FOIL CRUSH FOOTSTRAP
Dakine Foil Crush Footstrap
https://murrays.com/products/stand-up-boot
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-0369.webp?v=1718643459
HARKEN 40MM STANDUP BOOT
Harken 40mm Standup Boot
Murrays Part# 28-0369
Made of durable, flexible PVC, stand-up boots hold blocks up without snagging lines. The 369 fits 40 mm and 57 mm Carbo and Black Magic® blocks.
Harken Part# 369
https://murrays.com/products/baseball-cap-fwd-blue
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/aqua_baseball_hat_47-0090.jpg?v=1724872226
FORWAD BASEBALL SAILING HAT-BLUE
Forward Baseball Sailing Hat-Blue
Murrays Part# 47-0090-2
The Forward Sailing Hat features an adjustable Velcro strap and reflective print.
Features:
Velcro adjustment for a perfect fit
Reflective Velcro
100% polyester
https://murrays.com/products/baseball-cap-fwd-lt-gray
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Forward_grey_hat_47-0090.jpg?v=1724872281
FOWARD BASEBALL SAILING HAT-GRAY
Forward Baseball Sailing Hat - Grey
Murrays Part# 47-0090-9
The Forward Sailing Hat features an adjustable Velcro strap and reflective print.
Features:
Velcro adjustment for a perfect fit
Reflective Velcro
100% polyester
https://murrays.com/products/harken-29mm-carbo-cheek-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-0350.jpg?v=1718643268
HARKEN 29MM CHEEK BLOCK
Harken 29mm Cheek Block
Murrays Part# 28-0350
Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
https://murrays.com/products/cat-paws-4x4x36-pr
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/013-0031_cat_paws.jpg?v=1734720137
CAT PAWS HULL PADS (2)
Cat Paws Hull Pads
Murrays PN 13-0031
Cat Paws Hull Pads are foam pads that will protect your catamaran hulls. Similar to hull chocks, but much more versatile. Cat Paws can be used as a mast cradle while trailering, and are perfect for turning your cat on its side in parking lots. Made from a highly durable closed cell foam that does not absorb water, mold or corrode. Ideal for use on Hobie, Nacra, and Prindle catamarans.
Closed cell foam body with a bungee strap for holding it in
https://murrays.com/products/harken-29mm-carbo-stand-up-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0349.jpg?v=1676949867
HARKEN 29MM STAND-UP BLOCK
Harken 29mm Stand-up Block
Murrays Part# 56-31297
Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
Specifications:
330 lb. SWL
1000 lb. breaking strength
5/16" maximum line diameter
1-1/8" sheave diameter
2-3/16" long
Harken Part #349
Nacra Part# 31297
https://murrays.com/products/nacra-f18inf-batten-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-30853-3-400x400.jpg?v=1736891296
N-F18 INFUSION BATTEN SET
Nacra F18 Infusion Batten Set
Murrays Part# 56-30853
Tapered foam battens
Nacra part number 30853
https://murrays.com/products/rubber-boot-standup-large-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-0369_b9365d89-83ca-4eef-9351-99a351f66cd5.webp?v=1718643520
HARKEN 55MM STANDUP BOOT
Harken Rubber Standup Boot -55mm
Murrays Part# 28-0370
Made of durable, flexible PVC, stand-up boots hold blocks up without snagging lines. The 370 fits 75 mm Carbo blocks.
Harken Part# 370
https://murrays.com/products/block-cheek-bullet-wire-29mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-0109.webp?v=1718638812
HARKEN 29MM WIRE CHEEK BULLET BLOCK
Harken 29mm Wire Cheek Bullet Block
Murrays Part# 28-0109
Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Wire Bullet blocks use roller bearings to carry higher loads and feature hardcoat-anodized PTFE impregnated aluminum sheaves for strength and corrosion resistance.
https://murrays.com/products/winch-belt-holster
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/47-0051.jpg?v=1740675073
FORWARD WINCH BELT HOLSTER
Forward Winch Belt Holster
Murrays Part# 47-0051
Adjustable waist belt from 75 to 120cm – for all sizes
Compatible with all winch handle 204 to 253mm – universal
cover with articulation
Allows to follow the movement of the hip. Excellent freedom of movement
elastic strap with magnetic buckle to attach around the leg
adapts to the movement of the thigh. Good support. Quick and easy attachments/release
https://murrays.com/products/cheata-motor-arm
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/cheata-splash-plate
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/cheata-alu-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/13-1212.jpg?v=1732650020
CHEATA ALUMINUM BLOCK
https://murrays.com/products/cheata-bracket-pin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/13-1213_17910bcf-5043-4b94-b978-eb8ddef98843.jpg?v=1765305579
CHEATA BRACKET PIN
https://murrays.com/products/cheata-arm-bolt
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/cheata-arm-nut
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/cheata-splash-plate-screw
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/13-1211.jpg?v=1736969738
CHEATA SPLASH PLATE SCREW
https://murrays.com/products/cheata-block-set-screw
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/13-1214.jpg?v=1765305528
CHEATA BLOCK SET SCREW
https://murrays.com/products/cheata-wood-block
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/cheata-wood-block-screw
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/cheata-block-bumper
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/sol-18-jib-halyard-w-shackle
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/10-24-x-1-2-soc-head-screw
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/socket-head-cap-screws-805218-64_100.webp?v=1736966284
SOCKET HEAD SCREW 10-24 x 1/2"
10-24 x 1/2 Socket Head Screw
Murrays Part# 13-1226
https://murrays.com/products/spacer-plate
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/spacer-plate-w-hole
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/18sq-shroud-5-32-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/roller_swagged_shroud_hobie_16.jpg?v=1732733643
18SQ SHROUD 5/32" BLACK WIRE
The Murrays Hobie 16 Roller Swaged Shroud is an upgrade to the stock shroud or sidestay for the Hobie 16. We use a hydraulic swager exerts a force of over 10,000 pounds to quickly swage without work-hardening the stainless fittings. Hydraulic swaging produces a cleaner, stronger shroud.
https://murrays.com/products/18sq-bridle-5-32-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Bridle_BK_Thimble-Thimble_double_swaged.jpg?v=1729613871
18SQ BRIDLE 5/32" BLACK WIRE
Prindle 16 Bridle 1/8"
The Prindle 16 Bridle is a single 1/8" bridle wire for the Prindle 16 catamaran. Constructed to factory specifications. Available in White, Black or Bare wire.
Prindle Part Number 9002 - Prindle wire rigging made by Murrays Marine
https://murrays.com/products/18sq-forestay-5-32-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/H14_forestay_4bf17e81-f771-4f61-b08c-216d346f0440.jpg?v=1729612641
18SQ FORESTAY 5/32 BK
18SQ Forestay 5/32 Black
Murrays Part# 002-5045-02
Black coated forestay for your NACRA 18 Square built to original specifications.
https://murrays.com/products/18sq-dbl-trap-3-32-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Black_Double_Trap_8a61b5e0-c613-4829-9769-85cc6930d9a1.jpg?v=1758754790
18SQ DOUBLE TRAPEZE 3/32" BLACK WIRE (4)
Nacra 5.7 Double Trapeze (4 handles)
The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.
A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adjustment kit
Sailing Harness
Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased se
https://murrays.com/products/18sq-diamond-1-8-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hboie-18-Diamond-wire.jpg?v=1676951112
18SQ DIAMOND 1/8" BARE
H18 Diamond Wire Complete
Murrays Part# 50-61750001
Replacement Hobie 18 diamond wire assembly, including the turnbuckle, diamond wire roller and end fittings.
https://murrays.com/products/sail-main-hyde-wave-red
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-0403-01_4c020df6-34dc-41b2-b5c7-b45812751be5.jpg?v=1740441640
WAVE MAINSAIL (RED)
https://murrays.com/products/inter-17-shroud-5-32-bk-race
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/inter-17-forestay-5-32-bare-w-pigtail
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/inter-17-bridle-5-32-bare
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/tramp-hobie-16-3pc-bk-teflon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3102.jpg?v=1718809387
H-16 3-PIECE MESH TRAMPOLINE WITH TEFLON-BLACK
https://murrays.com/products/toggle-nut-3-8-24-rh
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/toggle-nut-3-8-24-lh
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/marine-furling-eye-1-8-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-1044-1.jpg?v=1740594164
MARINE FURLING EYE 1/8" (SS)
https://murrays.com/products/marine-furling-eye-5-32-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-1054-1.jpg?v=1740594211
MARINE FURLING EYE 5/32" (SS)
https://murrays.com/products/n-570-shroud-5-32-rs-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/MurraysShroudsThimbleandMarineEyeRS_e49a6a0a-5383-4681-a6ed-639922693904.jpg?v=1737156437
N-570 SHROUD 5/32" BLACK WIRE
https://murrays.com/products/tiger-double-trap-bk-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Black_Double_Trap_073d603b-b284-40c1-920c-f2a295cab58d.jpg?v=1722282838
TIGER DOUBLE TRAPEZE (4)
Tiger Double Trapeze (4 handles)
The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.
A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adjustment kit
Sailing Harness
Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased
https://murrays.com/products/sol-18-shroud-1-8-wh
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Shroud_BK-243x300.jpg?v=1736812761
SOL-18 SHROUD 1/8" WHITE WIRE
https://murrays.com/products/sol-18-shroud-1-8-bk
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/sol-18-forestay-1-8-wh
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/02-6245-01.jpg?v=1736812465
SOL-18 FORESTAY 1/8" WHITE WIRE
https://murrays.com/products/sol-18-forestay-1-8-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Forestay_BK-285x284.jpg?v=1743705473
SOL-18 FORESTAY 1/8 -BLACK
https://murrays.com/products/dart-18-forestay-1-8-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/H14_forestay_4bf17e81-f771-4f61-b08c-216d346f0440.jpg?v=1729612641
DART-18 FORESTAY 1/8 BK
18SQ Forestay 5/32 Black
Murrays Part# 002-5045-02
Black coated forestay for your NACRA 18 Square built to original specifications.
https://murrays.com/products/dart-18-trapeze-wires-bk-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Black_Single_Trap_22d94101-c472-4ab4-9f78-f8417122acda.jpg?v=1729613576
DART 18 TRAPEZE BLACK WIRES (2)
Hobie Sol Cat 18 Trapeze Wires
(2 Handles)
Trapeze Wire set for single trapeze.
Use this page to order product numbers:
002-6253-01
002-6253-02
https://murrays.com/products/g-cat-5-7-shroud-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Murraysshroud-black_Replacement_shroud_for_a_5.7_G-Cat..jpg?v=1737156191
G-CAT 5.7 SHROUD
Replacement shroud for a 5.7 G-Cat.
https://murrays.com/products/g-cat-5-7-forestay
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/g-cat-5-7-main-halyard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N5.0-5.2-5.7-5.5SL-main-halyard-with-shackle-and-stop_7b72fbac-6fa3-4512-9a34-1efcd191e132.jpg?v=1676950079
G-CAT 5.7 MAIN HALYARD
https://murrays.com/products/g-cat-5-7-bridle-assembly-bk
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nacra-20-carbon-shroud-black
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nacra-20-carbon-forestay-bare
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/n-20c-bridle-5-32-bare
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nacra-20-carbon-diamond
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-4894-20.jpg?v=1676952653
NACRA 20 CARBON DIAMOND WIRE
https://murrays.com/products/nacra-570-bridle-5-32-bk
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nacra-570-diamond-wire-thimble-old
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nacra-570-shroud-5-32-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/roller_swagged_shroud_black.jpg?v=1737156373
N-570 SHROUD 5/32" BLACK WIRE
Replacement Shroud for a Nacra 570
https://murrays.com/products/nacra-570-double-trapeze-wire-bk-4
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Black_Double_Trap_073d603b-b284-40c1-920c-f2a295cab58d.jpg?v=1722282838
N-570 DOUBLE TRAPEZE BLACK WIRE (4)
Tiger Double Trapeze (4 handles)
The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.
A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adjustment kit
Sailing Harness
Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased
https://murrays.com/products/nacra-570-forestay-5-32-rs-bare
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/m8x20mm-ss-flat-head-bolt
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/55-0014-300x300.jpg?v=1733504541
M8x20MM PHILLIPS HEAD BOLT-SS
M8 x 20mm Phillips Head Hydrofoil Bolt
Murrays Part# 55-0014
The M8 x 20mm Phillips Head Hydrofoil Bolts are used on Slingshot, Cloud IX, Lift Foils and many more. It's always good to have an extra set on hand, in case you loose some. This is your foil mast to mast collar connection bolt. Made of corrosion resistant 316 stainless steel.
https://murrays.com/products/m8x25mm-ss-flat-head-bolt
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/M8-allen-head-hydrofoil-bolt-1-300x300.jpg?v=1733504420
M8x25MM SS FLAT HEAD BOLT
M8 x 25mm Allen Head Hydrofoil Bolt
Murrays Part# 55-0015
The M8 x 25mm Allen Head Hydrofoil Bolts are used on Slingshot, Liquid Force foils and many more. It's always good to have an extra set on hand, in case you loose one. This is your foil mast to board connection bolt.; Works with all M8 board inserts and track inserts Made of corrosion resistant 316 stainless steal.
https://murrays.com/products/m8x30mm-ss-flat-head-bolt
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/55-0016-300x300.jpg?v=1733508840
M8x30MM SS FLAT HEAD BOLT
https://murrays.com/products/m8x30mm-ss-allen-head-bolt
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/images_df8b8549-499d-440c-8eb6-0c24b4d8b4e8.jpg?v=1733513382
M8x30MM SS ALLEN HEAD BOLT
https://murrays.com/products/nacra-570-jib-halyard-w-shackle-5-32
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nacra-15-forestay-5-32-bare-4mm-race
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/rigging-custom-shroud
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/rigging-custom-bridle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/PTP.png?v=1754005018
CUSTOM RIGGING BRIDLE WIRE
https://murrays.com/products/rigging-custom-forestay
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Dart20forestayblack_2147651b-5723-4a8e-b968-f9ec8eee75c6.jpg?v=1774284694
CUSTOM FORESTAY
https://murrays.com/products/nacra-f18inf-diamond-wire
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-4894-20.jpg?v=1676952653
NACRA F18 INF DIAMOND WIRE
https://murrays.com/products/rigging-custom-diamond-wire
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hboie-18-Diamond-wire.jpg?v=1676951112
RIGGING CUSTOM DIAMOND WIRE
H18 Diamond Wire Complete
Murrays Part# 50-61750001
Replacement Hobie 18 diamond wire assembly, including the turnbuckle, diamond wire roller and end fittings.
https://murrays.com/products/nacra-f20-carbon-trapeze-dbl-3-32-blk
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/inter-20-forestay-5-32-bare
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/staymaster-1-8-snap-ring
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-1043-1_Staymaster_snap_ring.jpg?v=1768260787
Staymaster 1/8 Snap Ring
The 1/8" Staymaster Snap Ring is a replacement snap ring for the 1/8" Staymaster Turnbuckle. It holds the nut in place that adjusts the length of the Staymaster turnbuckle.
https://murrays.com/products/prindle-rudder-rebuild-kit
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/wave-rigging-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-WVER.jpg?v=1715127981
HOBIE WAVE RIGGING KIT
Hobie Wave rigging kit, 2 shrouds, 2 bridles and a forestay
https://murrays.com/products/dart-18-bridle-1-8-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Bridle_BK_Thimble-Thimble_double_swaged.jpg?v=1729613871
DART-18 BRIDLE 1/8" BLACK
Prindle 16 Bridle 1/8"
The Prindle 16 Bridle is a single 1/8" bridle wire for the Prindle 16 catamaran. Constructed to factory specifications. Available in White, Black or Bare wire.
Prindle Part Number 9002 - Prindle wire rigging made by Murrays Marine
https://murrays.com/products/h18-se-rigging-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie18riggingset.jpg?v=1748986767
H-18 RIGGING KIT
Hobie 18 rigging set: Forestay, upper forestay, shrouds, bridles, trapeze wires
https://murrays.com/products/powerstick-repair-plug
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/rudder-pull-up-down-kit-prindle-all
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-1180.jpg?v=1721237370
PRINDLE RUDDER PULL UP/ DOWN KIT
Rudder Pull Up/Down Kit Prindle
Murrays Part# 001-1180
Replacement handles and ropes to pull your rudders up and down on all Prindle models.
https://murrays.com/products/wildcat-f18-dbl-trap-4
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/wave-trapeze-wire-bk-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/SingleTrap.jpg?v=1733763963
WAVE TRAPEZE BLACK WIRE (2)
Wave Trapeze Wire BK (2)
The basic trapeze assembly is constructed to factory specifications and includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order shock cord and adjustment kits separately.
A trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) may be added to wire with no installation charge! Check box when ordering and wire length will be adjusted accordingly.
https://murrays.com/products/turnbuckle-body-open-3-8-24
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/hobie-wave-jib-cleat-bracket
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-38999002_009086ba-779b-4897-b9a6-6a08ec41696c.jpg?v=1715128069
HOBIE WAVE JIB CLEAT BRACKET
Hobie Wave Jib Cleat Bracket
Murrays Part# 50-38999002
Hobie Wave Jib Cleat Bracket is mounted to the inner side of the hull when adding a factory jib kit.
Hobie Part# 38999002
https://murrays.com/products/endcap-crossbar-rear-plastic-open-port
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/32196-O_1-wxh_8b177090-e8a6-4a45-b020-051d996be5cc.jpg?v=1715128078
ENDCAP CROSSBAR REAR PLASTIC OPEN PORT
https://murrays.com/products/endcap-crossbar-rear-plastic-open-stbd
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/32197-O_1-wxh.jpg?v=1709836319
ENDCAP CROSSBAR REAR PLASTIC OPEN STBD
https://murrays.com/products/endcap-crossbar-rear-plastic-open-stbd-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/32197-O_1-wxh_91371d9c-1ec8-4a89-9d38-e45f7f92532b.jpg?v=1715128081
ENDCAP CROSSBAR REAR PLASTIC OPEN STBD
https://murrays.com/products/batten-set-mainsail-hard-nacra-17
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/31675_1-wxh_4cdc7373-ceb5-4b41-a74a-c0a3b477df5a.jpg?v=1715128089
NACRA 17 HARD BATTEN SET
N17 Hard Batten Set
Murrays Part# 56-31675
This is a full batten set for the NACRA 17 MKii Olympic Class Catamaran. For use in heavier breeze conditions.
https://murrays.com/products/57mm-ratch-hte-1-5x-grip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_3e08daf3-d615-41fc-be68-bcd9fe8188b4.jpg?v=1715128092
HARKEN 57MM RATCHAMATIC HTE BLOCK-SWIVEL, 1.5X GRIP
Harken 57mm Ratchamatic HTE Block-Swivel, 1.5x Grip
Murrays Part# 28-2165HTE
The Harken Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless. The spring on the HTE (high-threshold engage) version of the 57 mm Carbo Ratchamatic blocks was made stiffer to delay the point where the ratchet engages, allowing the block to run free more of the time
https://murrays.com/products/trimstar-2-5mm-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/JPG_84bdd71e27aac7b47717d77ddc9f4f2c_a4813aeb-7e02-49cd-a834-546620d7d8a9.jpg?v=1715128100
TRIMSTAR 2.5MM
https://murrays.com/products/tack-clew-plate-repl-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-1016tackclewplatewithrivets.jpg?v=1722538424
TACK AND CLEW PLATE REPLACEMENT KIT
Tack Clew Plate Replacement Kit
Murrays Part# 001-1016
The Tack & Clew Plate Replacement Kit includes one pair anodized aluminum plates with rivets to be set with a hammer. Rounded triangular plates measure 2-1/2″ by 2-1/2″ by 3″. Replacement rivets are available separately (#19-5005). These are commonly used as the H16 main sail clew plate and tack plate on older H16 sails. Newer sails use a hydraulic press ring at the tack and clew.
Compare to Hobie part number 12240000.
https://murrays.com/products/block-single-3
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-0005_dd054466-8024-4680-93d8-6dfc31c9fcc9.jpg?v=1715128113
HARKEN 3.00" BLOCK-SWIVEL
Harken 3.00" Block-Swivel
Murrays Part# 28-0005
The 3.00 (76 mm) blocks are compact and lightweight, with fast trim and release under high or low loads. Perfect for dinghies, scows, beachcats and iceboats, as well as small offshore racers and cruisers.
https://murrays.com/products/25mm-through-deck-wire-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_8ce3cafb-5fe5-4663-a9bb-59451f8ff49a.jpg?v=1715128118
HARKEN 25MM THROUGH-DECK WIRE BLOCK
Harken 25mm Through-Deck Wire Block
Murrays Part# 28-0302
Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes.
Harken Part# 302
https://murrays.com/products/gath-gopro-mount-w-fastener
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/52-2303.jpg?v=1709838722
GOPRO MOUNT WITH FASTENER
GATH helmet GOPRO MOUNT W/FASTENER
https://murrays.com/products/gath-gopro-mount-w-fastener-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/52-2303.jpg?v=1740523776
GOPRO MOUNT WITH FASTENER
GoPro Mount with Fastener for Gath Helmet
Murrays Part# 52-2303
The GoPro Camera Mount gives you the convenience of easy, clip-on/clip-off camera mounting on a Gath helmet. The kit combines the GoPro camera base plate with a Gath customized, rust-proof helmet screw for an easy, do-it-yourself, convenient, top mounting to provide a secure, well-balanced helmet cam. All model GoPro cameras easily clip on or off.
https://murrays.com/products/gath-audio-vent-universal
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/52-0080_2.jpg?v=1754582989
GATH UNIVERSAL AUDIO VENT
Gath Universal Audio Vent
Murrays Part# 52-0080
Replacement Gath helmet audio vent. Compatible with all Gath Neo, SFC, Gedi and EVA models. The only helmet it doesn't fit is the Retractable Visor model.
Gath replacement Audio Vents includes includes:
- 2 Audio Vents
- 2 Inner Flanges
- 1 Audio Vent Spanner Installation tool
- Fitting Instructions sheet.
https://murrays.com/products/sunfish-spars-and-sail-bag-poly-blue
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/sparBagBlue_93296_2b94be9f-9d67-4273-bf6e-0f6e8836b3f0.jpg?v=1715127643
SUNFISH SPARES AND SAIL BAG-POLY BLUE
https://murrays.com/products/ding-all-epoxy-stik
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/dingall.png?v=1732063770
DING ALL EPOXY STIK
The Ding All Expoxy Quik Stick is a hand-kneadable, special epoxy putty that mixes in just one minute for permanent repairs to damp or wet areas. Dries white in 30 minute cure time. Perfect gear bag item.
https://murrays.com/products/dielectic-grease-3oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/shopping_a38be3b7-e544-4bc6-ac46-c64a7d049d7a.webp?v=1741715802
DIELECTRIC GREASE 3oz
https://murrays.com/products/ding-all-sun-cure-poly-epoxy-repair-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/40-4011_0774ff33-057d-4bc1-97da-178835b3bcd5.jpg?v=1715128130
DING-ALL SUN CURE POLY AND EPOXY REPAIR KIT
Ding-All Sun Cure Poly & Epoxy Repair Kit
Murrays Part# 40-4011
Dings happen, but this Sun Cure 2.0 oz Epoxy Repairs All Kit can help make them un-happen (is that a word?) and get your board back in good shape.
Sun Cure 2.0 oz Epoxy Repairs All Kit Features:
One (1) Sun Cure 2.0 oz Epoxy Repairs All Kit from Sun Cure
Make professional repairs on your board
Helps your board ride better and last longer
https://murrays.com/products/standard-15-angled-riser
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_43fdafbb-2aa8-4d76-a530-35af3ffda1ba.jpg?v=1715128107
HARKEN STANDARD 15° ANGLED RISER
Harken Standard 15° Angled Riser
Murrays Part# 28-0296
Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting.
Fits cam 365
Harken Part# 296
https://murrays.com/products/micro-15-angled-riser
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_c4e72961-5dc6-4c00-a68a-a95cb6f4baf5.jpg?v=1715128097
HARKEN MICO 15° ANGLED RISER
Harken Micro 15° Angled Riser
Murrays Part# 28-0294
Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting.
Harken Part# 294
Fits Cam 471
https://murrays.com/products/gust-aero-sunglasses
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/1.-GUST-AERO.jpg?v=1712861546
FORWARD WIP GUST AERO POLARIZED SUNGLASSES
Forward WIP Gust Aero Polarized Sunglasses
Murrays Part# 47-2016
https://murrays.com/products/tramp-slug-slide
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-9892-300x300.jpg?v=1734545778
NACRA TRAMPOLINE SLUG SLIDE
Trampoline Slug Slide
Murrays Part# 56-9892
Use for lacing tramp to rear crossbar to eliminate the need for an aft lacing strip. The slug can also be used in sail track.
Used on the Hobie Getaway and Hobie 21SC forward trampolines
Hobie Part # 96280000
https://murrays.com/products/end-cap-fwd-xbar-cstg-p-s-gtwy
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-37151041.jpg?v=1737482109
GETAWAY FORWARD CROSSBAR END CAP
Getaway Forward Crossbar End Cap
Murrays Part# 50-37151041
Replacement forward cross bar end cap for Hobie Getaway.
Sold individually
Hobie Part# 37151041
https://murrays.com/products/mast-over-rotator-n6-0-na
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-9866.jpg?v=1723149506
NACRA MAST OVER ROTATOR
Mast Over Rotator
Murrays Part# 56-9866
This is the big wish bone rotator that goes out in front of the mast. Most have been removed or retrofitted, but we have a couple left if you're hunting for one!
Nacra part# 9866
https://murrays.com/products/spreader-tip-cover-all-each
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-9862-300x300.jpg?v=1738088836
NACRA SPREADER TIP COVER
Spreader Tip Cover
Murrays Part# 56-9862
These vinyl spreader bar end covers are real sail-savers! The smooth, resilient cover protects the jib luff from wear and tear from cotter keys and sharp edges. Nacras (except original 5.2 with non-adjustable spreaders) and Prindles.
Nacra Sailing factory replacement item# 30322
https://murrays.com/products/18mm-fly-block-double
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_82f8a6b8-cce6-4614-be9b-32248c5d042c.jpg?v=1715128250
HARKEN 18MM FLY SOFT-ATTACH DOUBLE BLOCK
Harken 18mm Fly Soft-Attach Double Block
Murrays part# 28-2158
Harken soft-attach Fly blocks are designed to provide strength without mass, providing sailors with big power in a low-aero package. Designed specifically for high-tech line, these efficient blocks have an incredible working load for their small size. Fly blocks are perfect for use on foiling dinghies and sport boats and for vang cascades and backstay systems on Grand-Prix racers.
https://murrays.com/products/mast-step-hinge-pin-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F128.jpg?v=1718809665
PRINDLE MAST STEP HINGE PIN
https://murrays.com/products/40mm-double-swivel-carbo-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_d23564b1-511a-4049-a409-62230a303a79.jpg?v=1715128256
HARKEN 40MM DOUBLE BLOCK- SWIVEL
Harken 40mm Double Block - Swivel
Murrays Part# 28-2638
Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
https://murrays.com/products/s-hook-inter-downhaul
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-9651_2.jpg?v=1723494261
NACRA INTER DOWNHAUL S HOOK
Inter Downhaul S Hook
Murrays Part# 56-9651
The Nacra Inter Downhaul “S” Hook is a down haul hook for all Nacra Inter catamarans.
Performance Sports factory Part# 9651
https://murrays.com/products/tramp-h17-wings-pr-black-lace-on
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3104-3.jpg?v=1718809260
H-17 WING TRAMPOLINE SET
H17 Wing Trampoline
Murrays part# 30-3104-3
The Murrays Hobie 17 Wing Trampoline is a pair of aftermarket trampolines for Hobie 17 wings, they are not class-legal for Hobie class racing. Made with polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won’t be sitting in a puddle. Includes both right and left wing trampolines.
These tramps can be laced on vs the stock style of sleeved on
https://murrays.com/products/16mm-pivot-cheek-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_cc00fe5c-1bdf-4ca5-9e4c-dbd98eae5610.jpg?v=1715128263
HARKEN 16MM CHEEK PIVOT BLOCK
Harken 16mm Cheek Pivot Block
Murrays Part# 28-0432
The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb. (113 kg) maximum working load.
https://murrays.com/products/shackle-bow-4mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_0097aa63-8a5f-4702-bd50-a3d839ac96b3.jpg?v=1715128268
HARKEN 4MM SHALLOW BOW SHACKLE
Harken 4mm Shallow Bow Shackle
Murrays Part# 28-2131
Forged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. Bow shackles are best for multidirectional loads. Shallow bow shackles are proportionally wider for their length than regular bow shackles.
https://murrays.com/products/harken-57mm-ratchet-block-1-5x-grip-w-swivel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_14412bc8-40b9-4117-aeed-965670a48047.jpg?v=1715128272
HARKEN 57MM RATCHET BLOCK-SWIVEL, 1.5 GRIP
https://murrays.com/products/tiller-end-cap-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-6040000M.jpg?v=1725656461
TILLER CROSSBAR ADJUSTABLE CAP KIT
Tiller Crossbar Adjustable Cap Kit
Murrays Part# 50-6040000M
Murrays Tiller Crossbar connection kit is a complete kit to connect the Hobie tiller cross bar and tiller arms. This is modeled after the original design but with some upgrades. We use 2 adjustable end caps to extend the overall adjustment length. Allows users shorten their tiller crossbar due to corrosion. 2 adjustable caps also allows users to adjust the crossbar length from either end of the bar. The tiller crossbar
https://murrays.com/products/manera-wing-harness-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Manera_Wing_Harness_Line_4bd80454-da81-4e13-ad36-df7b1c1fe610.png?v=1715128285
MANERA WING HARNESS LINE
Manera Wing Harness Line
Murrays Part#
The MANERA HARNESS LINE is made out of a spectra core with a special anti-abrasion sleeve. It ensures that the line withstands both traction and friction.
The HARNESS LINE should be attached to the wing handles in order to make sure the harness is well balanced between front and back traction. With its Velcro attachment, you can easily attach it to any wing, and make sure you can swap it from wing to wing in a matter of seconds.
https://murrays.com/products/re-downwind-waist-dry-bag
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/54-5536.png?v=1715128288
RIDE ENGINE DOWNWIND DRY WAIST BAG
Ride Engine Downwind Dry Waist Bag
Murrays Part# 54-5536
Cellphone, key fob, credit card, or anything that you want to keep dry and safe on your person the Ride Engine waterproof pouch is the perfect solution for sessions to downwind runs on a SUP, Kite or wingsurf.
https://murrays.com/products/liquid-rope-whipping-clear
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/40-8490-2-300x300.jpg?v=1738785082
WEST MARINE LIQUID ROPE WHIPPING-CLEAR
Liquid Rope Whipping-Clear
Murrays Part# 40-8490
Use Liquid Rope Whipping for a quick and easy way to finish any rope end. Prevents unraveling and forms a permanent, clear flexible coating. Excellent for synthetic and manila ropes.
Liquid Rope Whipping can also be used instead of a luff batten cap. Just dip the end of the batten to form a permanent, clear, flexible vinyl coating. 4 fl. oz.
https://murrays.com/products/i-20-forestay-adjuster-w-v-jam
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-9924.jpg?v=1748552444
NACRA FORESTAY ADJUSTER WITH V-JAM CLEAT
Nacra Forestay Adjuster with V-Jam Cleat
Murrays Part# 56-9924
Inter 20 Forestay Adjuster with V-Jam Cleat Inter with Roller Furler
https://murrays.com/products/gooseneck-downhaul-ring-h14-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/10772070.jpg?v=1716390859
H-14/16 GOOSENECK DOWNHAUL RING
H14/16 Gooseneck Downhaul Ring
Murrays Part# 50-10772070
Gooseneck downhaul ring for Hobie® 14 or 16 is a factory replacement part.
https://murrays.com/products/gooseneck-slide-h14-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/10772001.jpg?v=1716391013
H-14/16 GOOSENECK SLIDE
H14/16 Gooseneck Slide
Murrays Part# 50-10772001
Gooseneck slide for Hobie® 14 or 16 is a factory replacement part.
https://murrays.com/products/snuffer-bag-end-pole-12ft
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/57-mm-tripple-ratchet-blk-w-cam-cleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-2140.jpg?v=1718647219
HARKEN 57MM TRIPLE RATCHET BLOCK-SWIVEL, CAM CLEAT
https://murrays.com/products/open-skiff-deck-cover-murrays
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-1001.jpg?v=1719504597
MURRAYS OPEN SKIFF BOAT OCVER
O’Pen Skiff Boat Cover
https://murrays.com/products/cam-arm-cover-right-57mm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-2653.jpg?v=1718655544
HARKEN 57MM CARBO SIDE COVER
Harken 57mm Carbo Side Cover
Murrays Part# 28-26521B
One Harken replacement right or left 57mm side cover washer for #28-2629 Carbo Ratchamatic base block.
#28-2652 Right cam arm washer 57mm is Harken #H-26521B.
#28-2653 Left cam arm cover 57mm with nut is Harken #HSB524.
https://murrays.com/products/57mm-t2-single-loop-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-2151.jpg?v=1718650139
HARKEN 57MM T2 LOOP SOFT-ATTACH BLOCK
https://murrays.com/products/wm-marine-silicone-3-oz-clr
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/40-8018-300x300.jpg?v=1738784930
WEST MARINE SILICONE SEALANT-CLEAR
West Marine Silicone Sealant-Clear
Murrays Part# 40-8018
A mildew-resistant, non-sagging, moisture-curing silicone rubber sealant that remains flexible and has excellent resistance to the marine environment. Adheres to bare and painted metal, fiberglass, glass, non-oily woods, many plastics and abraded rubber. Clear sealant comes in a 3-oz. tube.
Hobie Cat® uses Part# 376
https://murrays.com/products/violon-screw
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/51-99221301-300x300.jpg?v=1739207775
EUROPEAN TILLER CROSSBAR VIOLON SCREW
European Tiller Crossbar Violon Screw
Murrays Part# 51-99221301
Designed for use with The French Hobie tiller.
Compatible with 19-2522 8mm Nylock nut.
Not compatible with shroud anchor bars.
https://murrays.com/products/rooster-quick-dry-poncho
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/rooster_poncho.png?v=1723149405
ROOSTER QUICK DRY PONCHO
Rooster Quick Dry Poncho
Murrays Part# 48-133233
The Rooster Quick Dry Poncho is small enough to fit neatly into the smallest space left in your kit bag, tucking neatly into its hood. Its microfiber construction has an amazing quick-dry drying ability and its thickness ensures that it dries fast in normal conditions to ensure you have an odor free Poncho for longer.
https://murrays.com/products/boom-clamp-h18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-617110000m.jpg?v=1724945687
H-18/21SE BOOM CLEAT CLAMP
Hobie 18/21Sport Edition Boom Cleat Clamp
Murrays Part# 50-61711000M
The Hobie boom clamp mounts the clamcleat (#27-0702) on to a Hobie 18 boom. Two boom clamps are required to mount one cleat.
This is a Murrays product, made with an Anodized aluminum body and a 316 stainless steal screw insert. Made in California, USA.
Compare to Hobie part# 61711000 discontinued by Hobie
https://murrays.com/products/dk-hammerhead-kite-bar-10
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-0158-300x300.jpg?v=1733525783
DAKINE HAMMERHEAD KITE SPREADER BAR
Dakine Hammerhead Kite Spreader Bar 10"
Murrays Part# 001-0158
Dakine's ergonomically-shaped Hammerhead Kite Spreader Bar features a short, hammer-shaped hook for control and a crossbar for hold-down webbing strap. Constructed of marine-grade, non-corrosive stainless steel.
*For use with a 2020 Dakine harness requires a Dakine Power Clip Buckle for quicker set up and disconnecting*
https://murrays.com/products/open-skiff-hiking-strap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/65-53263.png?v=1719503524
O'PEN SKIFF HIKING STRAP
O’Pen Skiff Hiking Strap
Murrays Part# 65-53263
Padded booster strap
What O’Pen says about the Skiff:
For fun, recreation, perfection and racing! The O’pen BIC sailing dinghy is a breath of fresh air for junior sailing. Based on a modern skiff concept, the O’Pen BIC is very fast, very simple, and very FUN to sail! The self-bailing open transom hull is rapid and responsive, with a modern rig that’s rugged and versatile.
https://murrays.com/products/open-skiff-mainsheet-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/65-31330.jpg?v=1719503286
O'PEN SKIFF MAINSHEET BLOCK
O’Pen Skiff Mainsheet Block
O’Pen Skiff Mainsheet Block for the O’Pen Skiff. Formerly known as the O’Pen Bic.
O’Pen OEM part # 31330.
https://murrays.com/products/open-skiff-dolly-wheel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/65-31761.jpg?v=1719503482
O'PEN SKIFF DOLLY WHEEL
O’Pen Skiff Dolly Wheel
Murrays Part# 65-31761
Replacement Dolly Wheel for the O’Pen skiff Dolly.
Tahe Part# 31761
https://murrays.com/products/open-skiff-mainsheet-ratchet-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/65-31331.jpg?v=1719503337
O'PEN SKIFF MAINSHEET RATCHET BLOCK
O’Pen Skiff Mainsheet Ratchet Block
The O’PEN SKIFF MAINSHEET RATCHET BLOCK is the OEM replacement block for the O’Pen Skiff. Formerly known as the O’Pen Bic.
O’Pen Skiff part # 31331.
https://murrays.com/products/open-skiff-daggerboard-retaining-loop
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/65-53322.png?v=1719503600
O'PEN SKIFF DAGGERBOARD RETAINING LOOP
O’Pen Skiff Daggerboard Retaining Loop
Murrays Part# 65-533322
Elastic loop + plastic hook to keep the fin in place
What O’Pen says about the Skiff:
For fun, recreation, perfection and racing! The O’pen BIC sailing dinghy is a breath of fresh air for junior sailing. Based on a modern skiff concept, the O’Pen BIC is very fast, very simple, and very FUN to sail! The self-bailing open transom hull is rapid and responsive, with a modern rig that’s rugged and versatile.
https://murrays.com/products/wmfg-3l-tall-kite-pump
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/wmfg_pump_589a3b37-c4c5-441b-afd9-7de40176d119.png?v=1725658825
WMFG KITE PUMP 4L
NEW, IMPROVED 4th GENERATION WMFG TALL KITEBOARD PUMP.
Height: 24"/61cm (Extra Tall!)
Diameter: 4"/10cm
Capacity: 2.9L/Stroke
As the originator of the big, tall, oversized, kiteboard pump WMFG is proud to introduce the third generation pump 4.0T! WMFG was the first "tall" kite pump on the market and has always been the most feature-rich, kite pump with the best selections of nozzle, the best hose available, and at the leading edge of pump tech. The new and improved extra big, tall, high volume 4.0T
https://murrays.com/products/x-over-helmet-fwd-blk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/forward-X-OVER_helmet-BLACK.jpg?v=1716430657
FORWARD X-OVER SAILING HELMET
The Forward X-Over Sailing Helmet (Crossover helmet) has been developed with America's cup teams to offer the best protection and with higher impact protection to matching those of Skiing helmets. The Crossover is the perfect choice for Multi-activity sport riders wanting to use their helmet in a variety of sports including foiling and or downhill skiing.
https://murrays.com/products/back-pack-w-dry-sleeve-fwd
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/47-4002.jpg?v=1730487220
FORWARD WIP BACKPACK WITH DRY SLEEVE
Forward WIP Backpack with Dry Sleeve
Murrays Part# 47-4002
The Forward Backpack with Dry Sleeve is great for day trips, as a carry on and the dry sleeve can keep it dry for use on boats.
Features:
Split pocket design with padded back pocket for computer and or tablet.
Large center pocket for personal with internal pockets and separators to keep your gear organized.
Large External rear pocket for helmets, shoes, or other large items
Sunglasses Pocket
Dry sleeve
https://murrays.com/products/sunfish-deck-cover-poly-blue
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/unnamed.jpg?v=1715128570
SUNFISH DECK COVER-POLY BLUE
Sunfish Deck Cover-Poly Blue
Murrays Part# 30-7050
Sunfish Direct covers are manufactured in the USA, with the most advanced materials available and are the only cover sporting a 5 year limited warranty.
Built to the highest quality standards, these covers are the best fitting, longest lasting and easiest to use covers on the market today.
Specifications:
Crafted in the USA
UV and mildew resistant
Water repellent
Breathable
Exceptionally strong
https://murrays.com/products/harken-40mm-carbo-tripple-carbo-w-cam
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_2e21459a-1aa1-4a3b-9d98-2e7184d78ebe.jpg?v=1715128573
HARKEN 40MM TRIPLE RATCHET BLOCK-SWIVEL, CAM CLEAT
Harken 40mm Triple Ratchet Block — Swivel, Cam Cleat
Murrays Part# 28-2612
Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.
https://murrays.com/products/hobie-wave-14-mast-base
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/51-13600010-300x300.jpg?v=1741714576
H-14/WAVE EUROPEAN MAST BASE
https://murrays.com/products/f-one-1500-carbon-gravity-front-wing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/FW-GRAVITY-1500.png?v=1723225609
F-ONE 1500 CARBON GRAVITY FRONT WING T1
A Gravity foil is an intuitive foil to use. It generates lift at low (and even very low) speed but does it a smooth way so you can keep your balance easily. The wings are designed to be easy to roll and turn, so they can perform in the surf.
The range includes 4 sizes from 1200 to 2200 cm². Foils with more area such as the 1800 and 2200 provide more lift, but we made sure they also come with more aspect ratio to maintain the glide and avoid unnecessary drag. Their shape provide great stability
https://murrays.com/products/wingleash-waist
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/57-1025.png?v=1721755354
MYSTIC WAIST WING LEASH
The Mystic Waist Wingleash was designed for those who want to attach their wing leash to their harness or waistbelt. The Waist Wingleash provides a secure connection to your wing, the waist attachment is ideal for those who prefer more freedom of movement when paddling to and from shore.
https://murrays.com/products/murrays-tell-tail-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-3820.jpg?v=1721755556
MURRAYS TELL TAIL SET
Murrays red, green and blue tell tails. Sail trimming guides.
https://murrays.com/products/dk-push-button-windsurf-bar-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-0184.jpg?v=1721756051
DAKINE PUSH BUTTON WINDSURF BAR
https://murrays.com/products/tear-aid-a-6x12-kit
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/010-3312M.jpg?v=1721755971
TEAR-AID® KIT (6"x12")
Tear-Aid Type A is the best-known kite and sail repair tape and it works on all sails, kites and wings: Dacron, Mylar and Ripstop nylon and Bladders. Each package includes one foot of clear repair tape, alcohol pad and instructions. To use, clean area to be repaired with alcohol, cut patch to size, then peel and stick
https://murrays.com/products/rudder-epo2-carbon
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/qr-pin-3-16-x-3-4-w-lanyard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/18-3m075.jpg?v=1721755645
QUICK RELEASE PIN 3/16 X 3/4" WITH LANYARD
Quick-Release Pin Deluxe 3/16 X 3/4 with Lanyard
Murrays PN 18-3M075L
The Quick-Release Pin Deluxe 3/16 X 3/4 with Lanyard features a deluxe dished head and a lanyard to help prevent loss. No other locking pin is faster operating or safer. The pin with cup head includes a stainless lanyard that comes secured on one end with a nicropress oval; the other end is left open so that you can secure with included nicropress oval after attaching the lanyard to your chosen location.
This Quick Release Pin featur
https://murrays.com/products/qr-pin-3-16-x-1-w-lanyard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/18-3m075L.jpg?v=1721755721
QUICK RELEASE PIN 3/16 X 1 WITH LANYARD
The Quick-Release Pin Deluxe 3/16 X 1″ with Lanyard features a deluxe dished head and a lanyard to help prevent loss. No other locking pin is faster operating or safer. The pin with cup head includes a stainless lanyard that comes secured on one end with a nicropress oval; the other end is left open so that you can secure with included nicropress oval after attaching the lanyard to your chosen location.
This Quick Release Pin features 2 locking balls for a extra secure grip, push button deluxe dished head,
https://murrays.com/products/bearing-5-32-delrin-each
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-hsb14.jpg?v=1721755792
HARKEN 5/32" DELRIN BALL BEARINGS
Harken 50 Cam-Matic Cleat 5/32" Delrin Ball Bearings
Murrays Part# 28-HSB14
Delrin actual resin is a black material which excels in low to moderate-load applications. The Harken Bearing 5/32″ Delrin- Order 66 for Aluminum Cam-Matic Cleat (#28-0150) or order 46 for Carbo (#28-0365). Also for Harken small furlers 434, 162 and 163.
https://murrays.com/products/std-poly-yacht-braid-1-4-wht
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39-3141.jpg?v=1721755882
1/4" DOUBLE POLY YACHT BRAID WHITE 6.35MM
Standard Polyester Yacht Braid 1/4" White
Murrays Part# 39-3141
1/4″ Double Braid Halyard Line
1/4″ Double Braid Halyard Line is ideal for halyard line on Hobie, Narca and Prindle catamarans.
Our 1/4″ Halyard Line features a polyester core and a polyester cover. Making it easy to splice, taper or customize to fit your needs.
This highly versatile rope combines low stretch with high strength offering dependability and unsurpassed resistance to abrasion, sunlight, sea salt and common chemic
https://murrays.com/products/toggle-pin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-1153.webp?v=1718990821
RONSTAN TOGGLE PIN 19MM LONG 6.4MM DIAMETER
Ronstan Toggle Pin 19mm Long 6.4mm Diameter
Murrays Part# 21-1153
Replaces 1/4" diameter clevis pin of same grip length. Also available with a lanyard 21-1153L
https://murrays.com/products/spring-clip-3-9
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0413.jpg?v=1718907624
RONSTAN CLEVIS PIN RETAINING CLIP
Ronstan Clevis Pin Retaining Clip
Murrays Part# 21-0413
The Ronstan Spring Clip is a stainless spring clip for quick rudder pin removal or Hobie 14, 16, 17, 18, 20, Wave and Getaway models. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie, Nacra and Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape.
Ronstan Part# RF413
https://murrays.com/products/trapeze-ring-w-adj-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0017.jpg?v=1718896529
RONSTAN TRAPEZE RING WITH ADJUSTER BLOCK
Trapeze Ring With Adjuster Block
Murrays Part# 21-0017
FEATURES Oversize 6mm (7/32″) diameter stainless steel rod loop
20mm (3/4″) ball bearing block for 2:1 system
Block accepts up to 6mm (1/4″) diam. line
MATERIALS
Grade 316 stainless steel loop and ball bearings
Acetal sheave
Nylon black cheeks
Weight
84g
Ronstan Part # RF17
https://murrays.com/products/dynabar-fr-11-slider-v8-v9
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/dybnabar-frreeride-400x400.png?v=1740777813
DYNABAR FREERIDE SLIDER BAR
https://murrays.com/products/dynabar-line-bushing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/DynabarLineBushing.jpg?v=1733425722
DYNABAR LINE BUSHING
Dynabar Line Bushing
Murrays Part# 001-0223
The Dynabar Line Bushings are used to protect the sliding rope and the auto center bungie from wear and tear when inserted in the sliding spreader bar. Sold Individually.
https://murrays.com/products/dynabar-11-hd-slider
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/IMG_9989-400x400.jpg?v=1733519296
DYNABAR HD SLIDER ASSEMBLY
Dynabar 11" HD Slider Assembly
Murrays Part# 001-0226
If you are a diehard slider bar user the Dynabar HD Slider Assembly is a quick and easy way to extend the life of the spectra line on your Dynabar. The HD assembly features a thicker spectra line and 2 stainless steal shackles. By attaching the sliding line with shackles, the HD assembly prevents wear on your line where it goes thru the bar. The spectra is easy to replace and all the sliding functions of the bar remain unhindered.
https://murrays.com/products/oxen-repair-and-evaluation
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/005-0750_Repair.jpg?v=1730407102
OXEN BLOCK REPAIR AND EVALUATION
https://murrays.com/products/f-one-swing-harness-line
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/54-5020.png?v=1721836508
F-ONE SWING WING HARNESS LINE
F-One Swing Wing Harness Line
Murrays Part# 54-5020
The F-One Swing Wing Harness Line is made of a 3.5 mm spectra rope covered by a polyurethane tube which offers great durability.
It connects to attachment points on the Swing’s central strut, and features several length, width and location adjustments to fit your preferences.
It helps improve upwind ability as well as transfers the power from the arms to your harness when going upwind, allowing you to ride harder and longer.
https://murrays.com/products/rudder-hold-down-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30002_1-wxh.webp?v=1741714055
NACRA RUDDER HOLD DOWN
Nacra Rudder Hold Down
Murrays Part# 56-30002
This part secures the lower rudder casting to the transom of most Nacra Catamarans. The small plate on both sterns which secures your lower rudder casting on the gudgeons, without it your rudders won't stay on all right.
Nacra Part# 30002
https://murrays.com/products/open-skiff-daggerboard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/65-31785..jpg?v=1719944373
O'PEN SKIFF DAGGERBOARD
O'pen Skiff Daggerboard
Murrays Part# 65-31785
O’pen Skiff Daggerboard replacement.
Tahe Part# 31785
https://murrays.com/products/clam-cleat-cl278
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/159_1_9e074c8f-239b-4bd7-8ecf-798568842392.jpg?v=1715128708
RACING MICROS SIDE ENTRY CLAMCLEAT
https://murrays.com/products/hobie-wave-upper-main-sheet-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-41500.png?v=1719335890
RONSTAN WAVE MAINSHEET UPPER BLOCK
Ronstan Wave Mainsheet Upper Block
Murrays Part# 21-41500
The Hobie Wave Mainsheet Upper Block is a Ronstan Series 40 fiddle block with 40mm sheaves. Series 40 All Purpose Block, Fiddle All purpose fiddle block with universal head
https://murrays.com/products/hobie-wave-lower-mainsheet-block
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-41530.png?v=1719335978
RONSTAN WAVE MAINSHEET BASE BLOCK
https://murrays.com/products/rudder-pin-wild-cat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/images_d95ddd3e-3454-421e-a7cc-c448dcdfb9aa.jpg?v=1715128718
WILD CAT RUDDER PIN
Rudder Pin Wild Cat
Murrays Part# 50-F18780330
https://murrays.com/products/tiger-delrin-screws
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/F99220006_1_z216_cee6091f-d050-443d-91d2-925a6b97f23f.jpg?v=1715128721
TIGER DELRIN SCREWS
https://murrays.com/products/harken-40mm-carbo-triple-carbo-cam-fairlead
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_7c22e795-c27b-4595-a2a0-bbae5c96879e.jpg?v=1715128724
HARKEN 40MM TRIPLE RATCHET BLOCK-SWIVEL, CAM CLEAT
Harken 40mm Triple Ratchet Block-Swivel, Cam Cleat
Murrays Part# 28-2612F
Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.
Harken Part# 2612
https://murrays.com/products/spreader-bar-screw-course-thread-clear
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-9851-1-300x300.jpg?v=1738088377
NACRA SPREADER BAR SCREW (Coarse THREADS)
Spreader Bar Screw (Fine Threads)
Murrays Part# 56-9851-1
Clear anodized, course-threaded diamond wire spreader bar adjustment screw for Nacra and Prindle catamarans.
https://murrays.com/products/ultraneema-control-line-2-5mm-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39-43025blue_Aplharope_Ultraneema.jpg?v=1734546138
ULTRANEEMA CONTROL LINE 2mm
Ultraneema Control Line 2mm Blue
Murrays Part# 39-43025
Construction: Double braid: 16 strand, Bio-Dyneema® Sk78 core, HT Polyester cover.
Uses: Control line, Halyards
Advantages: Very Round, Low Stretch
Sold by the foot - Quantity 1 equals 1 foot of line.
https://murrays.com/products/57mm-t2-soft-attach-ratchamatic-1-5x-grip
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_8a6a9bac-e2b1-4138-a574-07359a5be063.jpg?v=1715128735
HARKEN 57MM T2 SOFT-ATTACH RATCHAMATIC BLOCK-1.5 GRIP
Harken 57mm T2™ Soft-Attach Ratchamatic Block-1.5x Grip
Murrays Part# 28-2167
Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip. The patented T2 Ratchamatic is Harken’s newest block to feature the T2 line’s styling and soft-attachment system.
https://murrays.com/products/3m-perfect-it-compound-md
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/17568734_1500.jpg?v=1712180721
3M PERFECT-IT COMPOUND (MEDIUM)
3M Perfect It Compound Md
https://murrays.com/products/3m-perfect-it-compound-hvy
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/17568692_1500_042699e4-efdf-4ce9-ba6f-0fb7290d0c2f.jpg?v=1715128752
3M PERFECT-IT COMPOUND (HEAVY)
3M Perfect-It Compound (Heavy)
Murrays Part# 40-9010
When you want to get serious about bringing back a shiny gelcoat! Bust out the automatic buffer and a wool pad, and go to town. This stuff works well to bring back a shine to your old hulls. Wet sand first, or just clean it up and go for it! Check out the blogs for some examples.
https://murrays.com/products/3m-9in-wool-polish-pad
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/15654486_LRG_28a786b3-3f27-4254-8fc6-84ebf4c70498.jpg?v=1715128756
3M WOOL POLISH PAD
3M Wool Polish Pad
Murrays Part# 40-9015
9 inch polishing pad for automatic buffer. Great for use with 3M protectant restoration polish to clean up your chalky hull.
https://murrays.com/products/getaway-main-batten-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Brighter_Batten_set.jpg?v=1718808714
GETAWAY MAIN BATTEN SET
Getaway Main Batten Set
Murrays Part# 30-3045
The Murrays Getaway Main Batten Set are the same specs as the OEM version except yellow and with white batten caps. This set includes eight battens with black OEM luff caps and white leech caps.
Specifications:
Batten #8 - 34.5" jib batten
Batten #7 - 55"
Batten #6 - 69"
Batten #5 - 77.75"
Batten #4 - 84.25"
Batten #3 - 88.75"
Batten #2 - 90.75"
Batten #1 - 92"
Hobie Part# 37016001
https://murrays.com/products/hobie-16-alu-mast-float-fitting-mama-bob
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/51-99000125B.jpg?v=1719943747
HOBIE MAST FLOAT BRACKET-MAMA BOB
Hobie Mast Float Bracket-Mama Bob
Murrays Part# 51-99000125
The Hobie mast float bracket is compatible with Mama Bobs. It is designed to install a mast float onto a solid aluminum Hobie 16 non-comptip mast head. Fits non-us boats, or old US boats with some modification.
https://murrays.com/products/chain-3-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/00-6051-1.jpg?v=1734553798
CHAIN 3/16"
Chain 3/16"
Murrays Part# 002-6051-1
Use chain as a counter weight to keep a racing mark upright. This 3/16" PC proof coil (PC) chain has a 750lb. SWL, 3000 lb. breaking strength, and weighs 0.39lb./ft.
The chain is hot-dip galvanized, which is superior to zinc electroplating. Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded. Proof Coil (PC) is made of low-carbon steel and designed for ordinary marine applications
https://murrays.com/products/snufferbag-race-small-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/31572_1-wxh_d0a73a10-7ca2-4733-b356-8e4d278d1d4e.jpg?v=1715128778
NACRA SMALL RACE SNUFFERBAG
https://murrays.com/products/open-skiff-blade-bag
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/102556_bc8cd597-4462-48d3-a979-9fb926c9c193.png?v=1715128793
O'PEN SKIFF BLADE BAG
https://murrays.com/products/airtime-valve-trap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/61-6200.jpg?v=1717428920
AIRTIME VALVE TRAP
https://murrays.com/products/n15-f16-n17-f18-tapered-mainsheet-w-splittale-10-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-50017.jpg?v=1717429309
NACRA TAPERED MAINSTEET WITH SPLITTALE
Nacra Tapered Mainsheet with Splittale 1:10
Murrays Part# 56-50017
The N15 Tapered Mainsheet w/ Splittale 10:1 has a D cup kmix basics, made by Alpha Ropes. The construction of the line is double braid, 12 strand coated, Dyneema® Sk78 core, 24 plait mix with a HT Polyester / Cordura cover.
https://murrays.com/products/open-skiff-tiller-end-plug-murrays
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Tiller-End-Cap-Murrays-3-2.jpg?v=1717429214
O'PEN SKIFF TILLER END PLUG (MURRAYS UPGRADE)
O’Pen Skiff Tiller End Plug
Murrays Upgrade
Murrays Part# 65-316970
The O’Pen Skiff Tiller End Plug Murrays Upgrade is the solution to a weak point on the O’Pen Skiff boat. This upgrade replaces the two standard tiller end plugs that go on each pintle. Only two are required instead of four because the Murrays Tiller end plug is solid and spans the whole distance inside the rudder housing. So you don't need two per pintle only per rudder.
https://murrays.com/products/f20-tapered-mainsheet-10-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-50022.jpg?v=1723218488
NACRA TAPERED MAINSHEET 1:10
Nacra Tapered 1:10 Mainsheet
Murrays Part# 56-50022
This mainsheet 1:10 F20 (blue) has a Dcup kmix basics, made by Alpha Ropes. The construction of the line is double braid, 12 strand coated, Dyneema® Sk78 core, 24 plait mix with a HT Polyester / Cordura cover. This all round line, is ready to splice of taper and excellent for sheets, halyards and control lines.
https://murrays.com/products/gooseneck-box-fitting
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-7808_gooseneck.jpg?v=1717427980
NACRA GOOSENECK BOX FITTING
Gooseneck Box Fitting
Murrays Part# 56-7808
Prindle Gooseneck box fitting, part of the boom to mast connection assembly to on Nacra 5.2s and all Prindles.
Nacra Sailing Factory item# 30203
https://murrays.com/products/6mm-wizard-hat-hardware-with-wrench
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Wizard_Hat_with_wrench_55-002.jpg?v=1726159355
WIZARD HAT UNIVERSAL HYDROFOIL MAST TRACK HARDWARE KIT W/ WRENCH
The Wizard Hat Hydrofoil Mast Track Hardware is a universal hydrofoil mounting kit. It works with both M6 and M8 tracks, and with all foil styles and brands. The Wizard Hat features bolts that are integrated into the mast track slides which reverses the nut and bold allowing you to have a longer bolt that can easily be used on virtually any foil. The Wizard Hat also utilizes a 15mm hex head nut, so it can be tightened with a wrench instead of a Allen key.
https://murrays.com/products/nacra-mast-rotator-wishbone
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30315_1-wxh.webp?v=1741710478
NACRA WISHBONE MAST ROTATOR
Nacra Wishbone Mast Rotator
Murrays Part# 56-30315
The wishbone which connect to the mast base, this is where you attach the mast rotation. This is NOT for the quick release system
https://murrays.com/products/nacra-boom-pin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-30376.jpg?v=1717429431
NACRA BOOM PIN
https://murrays.com/products/mast-base-cast-hinge-h18-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/60650011_Hobie_18_mast_base_hinge_casting_mast_step_casting.jpg?v=1751475150
HOBIE 18 MAST BASE HINGE
Hobie 18 Mastbase Hinge
Murrays Part# 50-60650011
Mastbase hinge for the Hobie 18. Factory supplied part for all Hobie 18 masts.
Mastbase hinge for the Hobie 18.
Does not include hardware for mounting.
https://murrays.com/products/hammock-hook
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-1034-300x300.jpg?v=1737738124
NACRA HAMMOCK HOOK
Nacra Hammock Hook
Murrays Part# 56-1034
Hammock hook (sideloader) for Nacra 5.2, 5.5, 5.8, 6.0 and 18SQ
Nacra Sailing factory item# 30013
https://murrays.com/products/nacra-16mm-cheek
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30652_1-wxh_2a10d8bb-54ed-4a46-8197-2a70a5dbe6da.webp?v=1715128833
NACRA CHEECK BLOCK 16MM-HARKEN
Nacra Cheek Block 16mm-Harken
Murrays Part# 56-30652
The 16 mm is Harken?s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. Mostly used on bowsprits.
https://murrays.com/products/front-crossbar-end-cap-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-2902-400x400.jpg?v=1737745557
PRINDLE FRONT CROSSBAR END CAP
Front Crossbar End Cap
Murrays Part# 56-2902
The Prindle Front Crossbar End Cap is for the front crossbar of all Prindles fits both right and left sides. Please specify silver or black and we will do our best to accommodate your selection
Nacra Sailing factory item# 30394
https://murrays.com/products/lance-cleat-starboard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/007-359S.jpg?v=1721231602
STARBOARD-LANCE CLEAT
Starboard-Lance Cleat
Murrays Part# 007-359S
The Lance Cleat - Starboard utilizes a single rugged aluminum alloy cam mounted vertically in a black molded frame. The rope slides in sideways and runs freely thru the fairlead, which has a colored roller incorporated in the top for easier sheeting and identification. Ideal for use in confined spaces. For use with 3/16 to 1/4″ line. The base is 22mm x 30mm.
https://murrays.com/products/crossbar-extrusion-p18-2-19
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/rope-guide-wire-for-small-c-cleat
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5404.webp?v=1719342324
RONSTAN ROPE GUIDE FOR SMALL CAM CLEATS
Ronstan Rope Guide for Small Cam Cleats
Murrays Part# 21-5404
A comprehensive range of specialist cleat accessories allow customization of the cleat setup to optimize performance by controlling inward lead, outward lead, cleating and nucleating angle and height.
https://murrays.com/products/remote-throttle-torqeedo
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/71-1918-300x300.jpg?v=1738356444
TORQEEDO REMOTE THROTTLE CONTROL
Torqeedo Remote Throttle Control
Murrays Part# 71-1918
The Torqeedo Remote Throttle Control (Torqeedo #1918) includes integrated display with information about battery status, GPS-based speed and remaining range calculation. It is the replacement throttle for some cruise and ultralight motors. It includes 5-ft and 16-ft connection cables between motor and throttle. This throttle also allows optional remote throttle location for use with Travel 603/1103 tiller models.
Note: Original tillers from 503
https://murrays.com/products/rooster-sunglass-strap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/RoosterSunglassStrap1.jpg?v=1734629715
ROOSTER SUNGLASS SPORT STRAP
Rooster Sunglass Sport Strap
Murrays Part# 48-130143
The elasticated strap combined with cylindrical rubber inserts and adjustable toggle provides a secure and unrestrictive solution to keeping your glasses in place.
https://murrays.com/products/rooster-cap-leash
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/rooster_cap_leash_99564.jpg?v=1725656179
ROOSTER CAP LEASH
Rooster Cap Leash
Murrays Part# 48-129031
The Rooster Cap Leash features a durable webbing leash with zero corrosion fixtures at each end. The damage free secure grip will ensure that you never loose your hat again.
https://murrays.com/products/fastex-buckle-1-5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-014_d13c9f35-7910-4d41-a5f7-0786be6aae38.jpg?v=1729614777
FASTEX BUCKLE
Fastex Buckle
Fastex® brand plastic, two-part side-release buckle for webbing.
Use this page to order product numbers:
01-0146 1-1/2″
01-0147 2″
https://murrays.com/products/open-skiff-dolly-promo
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/dolly__03740.jpg?v=1741709293
O'PEN SKIFF PROMO DOLLY
https://murrays.com/products/aquapac-keymaster-case-608
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/608-front-waterproof-case-aquapac.jpg?v=1731427741
AQUAPAC KEYMASTER CASE 608
https://murrays.com/products/vane-replacement-tips-washers-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/004-7704-1.jpg?v=1734645135
WIND VANE REPLACEMENT TIPS & WASHERS
Wind Vane Replacement Tips and Washers
Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly!
https://murrays.com/products/sail-main-h18-white
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-60991011.jpgHobie18Mainsail.jpg?v=1734041634
H-18 MAINSAIL (WHITE)
HOBIE 18 MAIN SAIL - WHITE
White Hobie 18 main sail from Hobie. Discontinued product, limited availability.
Hobie part number 60991011
https://murrays.com/products/lwr-rudder-casting-h18-old-used
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/3FFD834F-6384-459C-AC90-A0FD2D6A61E2.jpg?v=1744669910
H-18 LOWER RUDDER CASTING-USED
https://murrays.com/products/corner-casting-front-rt-bk
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/shock-cord-dyneema-cover-1-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39-7391D.png?v=1744740493
DYNEEMA SHOCK CORD 3MM
Shock Cord Dyneema Cover 4mm - White
Murrays Part# 39-7391D
Robline 4mm Dyneema coated bungee.
Robline part number DSC-4W
https://murrays.com/products/duotone-freeride-chickenloop
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/duotone-2021-loop-freeride_-300x300.jpg?v=1725658726
DUOTONE FREERIDE CHICKENLOOP
The Duotone Freeride Chickenloop Kit comprises of the smallest chicken loop combined with a short leash. This kit is the first choice for freeriders which are not unhooking. The short chicken loop maximizes the depower range, whilst the shorter safety leash is tangle-free.
https://murrays.com/products/bws-pads-tail-skinny-blue-diamond
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/54-0092BD_ae2a7e62-890c-4f74-8038-042361f93258.jpg?v=1741116846
BWS PAD-SKINNY TAIL
BWS Pad- Skinny Tail Pad
Murrays Part# 54-0092BD
Color: Blue
Traction Design: Diamond
BWS Pad- Tail Pad Skinny
The BWSurf Pad - Tail Pad Skinny. Used with legendary 3M backing and 5mm EVA on the top these pads aren’t going anywhere. And neither are your feet.
https://murrays.com/products/headboard-alum-w-rivets
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-68330011.jpg?v=1727286229
HOBIE ALUMINUM HEADBOARD WITH RIVETS
Hobie Main Sail Headboard w/ rivets
Replacement Hobie factory Hobie Main Sail Headboard w/ rivets. Hobie part #68330011
https://murrays.com/products/dk-6-t-series-ws-spreader-no-pad
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-0156-1-300x300.jpg?v=1733507311
DAKINE T-SERIES WINDSURF SPREADER BAR
Murrays Part# 001-0156-1
The Dakine T-Series Windsurf Spreader Bar is a non-corrosive, marine grade stainless steel windsurfing spreader bar by DaKine. The T-series bar is for use with DaKine Posi-Lock harnesses (Such as the NRG and Thermo Form series T4, T5, T6, T7 and T8 Classic) and is also compatible with 2012 and older Dakine harnesses with the Power Clip buckle system.; The easy way to tell if this is the right spreader for your windsurfing harness, is if your harness is if it has clips on both
https://murrays.com/products/wmfg-front-foot-traction-pad-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/wmfg-FRONT_FOOT_BLACK-1-400x400.jpg?v=1741204972
WMFG FRONT FOOT KITEBOARD TRACTION PAD
https://murrays.com/products/open-skiff-tiller-clam-cleat-pk-10-discontinued
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/65-31650.jpg?v=1719503434
O'PEN SKIFF TILLER CLAM CLEAT (PK 10) (Discontinued)
O’Pen Skiff Tiller Clam Cleat
Murrays Part# 65-31650
Package of 10 O’Pen Skiff Tiller Clam Cleat
https://murrays.com/products/nacra-trampoline-tie-rod-8mm-176cm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/32180-300x138.jpg?v=1741706987
NACRA TRAMPOLINE TIE ROD
Nacra Trampoline Tie Rod
Murrays Part# 56-32180
The NACRA Trampoline Tie Rod 8mm 176cm, that can be used for the Nacra 460, F16 and the NACRA 17.
https://murrays.com/products/bws-pads-tail-skinny-charcoal-striped
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Skinny-Tail-CS-300x300.jpg?v=1741116296
BWS PADS-SKINNY TAIL
https://murrays.com/products/nacra-nf20c-snufferbag-xl-race
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/31238_1-wxh_99aaf456-6fef-4267-906a-a2aa3652940c.jpg?v=1715128924
NACRA NF20C RACE SNUFFERBAG
Nacra NF20C Race Snufferbag
Murrays Part# 56-31238
This race snufferbag can be used on the Nacra 460, 500, NACRA15 and also on the F16.
The sufferbag race comes with some advantages compared to the standard black. The polyester laminate gives structure to the material resulting in more balance during sailing because the snufferbag keeps it shape. The fabric prevents water from absorbing into snufferbag. This make the snufferbag and spinnaker lighter, what results in easier hosting of the spinnaker.
https://murrays.com/products/series-15-bb-block-stand-up-loop-top
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-15141.webp?v=1718994291
RONSTAN SERIES 15BB BLOCK, STAND UP LOOP
Ronstan Series 15BB Block, Stand-up Loop
Features:
Smallest and lightest ball bearing block available
Precision molded acetal sheave running on stainless steel ball bearings provide high performance
https://murrays.com/products/traveler-car-sb-cb-hl-pivot-shv
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_7d5c258a-c63e-438b-99d3-11568cbb349d.jpg?v=1718656678
HARKEN 22MM HIGH-LOAD 1250 CAR-PIVOTING SHEAVES, EYESTRAP
Harken 22mm High-Load 1250
Car-Pivoting Sheaves, Eyestrap
Murrays Part# 28-2765
High-Load Harken Traveler Car — Pivoting Sheaves Heavy Duty Eye Strap for use on small boat main traveler car with captive bearings works with new (2003 and newer) track and can be adapted to be used on the older non captive ball tracks used prior to 2003. See the manual for instructions and purchase a car loader separately. Replaces 28-0214. and 28-2737.
https://murrays.com/products/h21sc-rudder-pin
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Rudder-Pin-1.jpg?v=1737479960
H-21SC RUDDER PIN
H21 Super Cruiser Rudder Pin
Murrays part# 50-30740001
H21/SC Hobie Rudder Pin for the Hobie 21 and the Hobie 21 Sport Cruiser.
Hobie part# 30740001
https://murrays.com/products/shock-cord-dyneema-cover-4mm-white
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39-7391D.png?v=1744740493
DYNEEMA SHOCK CORD 4mm
Shock Cord Dyneema Cover 4mm - White
Murrays Part# 39-7391D
Robline 4mm Dyneema coated bungee.
Robline part number DSC-4W
https://murrays.com/products/float-mast-bearing
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/36600031_1_z49_c132e3ae-e918-4bf3-9b74-482e939a144d.jpg?v=1715128944
MAST FLOAT BEARING
Mast Float Bearing
Murrays Part# 50-36600031
https://murrays.com/products/welded-s-hook
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-9650.jpg?v=1723494038
WELDED "S" HOOK
Welded "S" Hook
Murrays Part# 56-9650
Welded stainless “S” hook for all older Nacras.
Performance Sports factory item# 9650
https://murrays.com/products/rooster-safety-knife
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/48-132418.png?v=1719510539
ROOSTER SAFETY KNIFE
Featuring a molded body with a replaceable stainless steel blade. The opposed slopes at the back of the blade reduces friction resistance which enables a smooth and more effective cut. The opposed slopes at the back of the blade reduces friction resistance which enables a smooth and more effective cut. Featuring a molded body with a replaceable stainless steel blade.
https://murrays.com/products/40mm-carbo-double-ratchet
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/HHSB411.webp?v=1731420301
HARKEN 40MM DOUBLE BLOCK RATCHET
Harken 40mm Double Block Ratchet
Murrays Part# 28-HSB411
Commonly used in our 4:1 race mainsheet system for a Hobie Wave upgrade. Features a single manual ratchet switch on one of the sheaves to provide a bit of extra purchase.
https://murrays.com/products/spare-parts-kit-travel
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/71-1927.jpg?v=1732312002
TORQEEDO SPARE PARTS KIT TRAVEL
TORQEEDO SPARE PARTS KIT TRAVEL
Set for Torqeedo Travel models. Comprises emergency magnetic stop key attachment pin (long) for battery and attachment pin (short) for steering.
https://murrays.com/products/harken-cam-base-16mm-shvs-and-adj-angle-micro
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_6739aace-adc9-4427-ab74-847fca34d5f2.jpg?v=1715128955
HARKEN CAM BASE - 16MM SHEAVE ADJUSTABLE ANGLE MICRO
Harken Cam Base-16mm Sheave and Adjustable Angle Micro
Murrays Part# 28-9051
The 9051 adjustable cam swivel base with 468 Micro Cam-Matic cleat provides precise cleating. The cleating angle adjusts infinitely in a 5-17 degree range up and down for optimal line lead. The 16 mm sheaves feature low-friction stainless steel ball bearings to handle high loads, ideal for controls where cleating angles change dramatically.
https://murrays.com/products/sunfish-deck-cover-w-spars-poly-blue
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/unnamed_7cec432e-2613-48a4-881e-d292e03cdde1.jpg?v=1715128959
SUNFISH DECK COVER WITH SPARS-POLY BLUE
https://murrays.com/products/microlight-filler-2-oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/9a9f4e19-1c96-4466-9e79-e2568daac3ba_65976949-c139-410b-9b1b-e362a9c207cd.webp?v=1715128962
WEST SYSTEM 410 MICROLIGHT FILLER 2OZ
West System 410 Microlight Filler 2oz
Murrays Part# 40-4107
West System 410 Microlight Fairing Filler thickens resin and makes it into a less-dense putty form that is better for making certain repairs. Add more filler to make the epoxy thicker. Use with West Systems Epoxy Resin (#40-4103). 2 oz.
https://murrays.com/products/aquapac-mini-cam-hrd-lens-428
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/49-2428-1.jpg?v=1731427919
AQUAPAC MINI CAMERA HARD LENS 428
Aquapac Mini Camera Hard Lens 428
Murrays Part# 49-2428
https://murrays.com/products/split-ring-3-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9490.jpg?v=1712862430
3/16" SPLIT RING
3/16" Split Ring - 7/16″ Diameter
Murrays Part# 22-9490
Stainless steel split ring for 1/8-3/16″ diameter clevis pins. Comparable to Hobie Cat® #81503100 Small Clevis Ring. This is a super small size, best for locations where you may be concerned about it snagging on something. The small size helps prevent it from snagging on lines, sheets, sails and clothing.
https://murrays.com/products/hobie-wave-jib-orange-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie-Wave-Jib-Orange-38992072__10476.jpg?v=1738284226
WAVE JIB SAIL (ORANGE)
Hobie Wave Jib- Orange
Murrays Part# 50-38992072
Description:
Orange jib for the Hobie Wave catamaran.
Orange 6 oz heavy duty Dacron sailcloth
25 square foot sail area
Hobie Part# 38992072
https://murrays.com/products/fst-10-32-3-ph
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/ppms3161.jpg?v=1735923910
BOLT 10-32X3" PAN HEAD
https://murrays.com/products/xbar-endcap-right-rear-p16-18
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-3002-1-400x400.jpg?v=1737746017
PRINDLE CROSSBAR RIGHT REAR END CAP
Crossbar End Cap Right Rear
Murrays Part# 56-3002
The Prindle crossbar end cap for the right rear cross bar on the Prindle 15, 16, 18 and Escape.
Performance Sports factory item# 3002
https://murrays.com/products/fanatic-skywing-footstrap-w-hardware
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/54-1041.png?v=1724856868
FANATIC SKYWING FOOTSTRAP WITH HARDWARE
Fanatic Skywing Footstrap
Murrays Part# 54-1041
The Fanatic Skywing Footstrap is an adjustable footstrap for the Skywing and foiling SUPs.
Includes: 2 self-tapping screws and anti twist plates.
Specs: 11.5″ long x 2′ wide x 1′ thick
Sold individually
https://murrays.com/products/nacra-15-spi-wht-holmenkol-treatment
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/60331-02S_1-wxh.jpg?v=1715129008
NACRA 15 SPINNAKER-WHITE
Nacra 15 Spinnaker-White
Murrays Part# 56-60331-02S
Holmenkol Treatment
https://murrays.com/products/stealth-bar-dyneema-line-short-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Mystic-Stealth-wave-Spreader-Bar-300x300.jpg?v=1738699312
MYSTIC STEALTH BAR SHORT SURF ROPE
https://murrays.com/products/rudder-head-roller
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/32081_1-wxh.jpg?v=1715129016
RUDDER HEAD ROLLER
https://murrays.com/products/hobie-16-kissme-jib-sheet-traveler-upgrade-dlx
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-3151-400x400.jpg?v=1725043517
H-16 KISSME JIB SHEET & TRAVELER UPGRADE DELUXE
H16 Kissme Jib Sheet & Traveler Upgrade DELUXE
Murrays Part# 001-3151
This is the best way to upgrade your vintage H16 jib sheeting system. This kit includes upgraded traveler cars with carbo blocks for smooth function, and Ronstan cam cleats to facilitate smooth and accurate jib traveler position control.
Kit Includes:
Traveler Cars with Pulleys
Corner Casting Cheek Blocks
360 Swiveling Jib Sheet Cleat
Traveler Car Control Cam Cleat
Traveler Car Control line
Auto Center Bungee
https://murrays.com/products/40mm-single-carbo-cam-bkl-w-beck
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/product_334dc23b-197c-415a-a361-b3a28ab7c664.jpg?v=1715129028
HARKEN 40MM BLOCK- SWIVEL BECKET, CAM CLEAT
Harken 40mm Block -Swivel, Becket, Cam Cleat
Murrays Part# 28-2646
Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
https://murrays.com/products/s-hook-safety-chain-keeper
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/368433_1500.jpg?v=1715129051
S-HOOK SAFETY CHAIN KEEPER
Safety Chain Keeper
https://murrays.com/products/naish-hero-140cm-kiteboard
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/naish2020_hero-140.jpg?v=1726158935
NAISH HERO KITEBOARD 140cm
Naish Hero Kiteboard
Murrays Part# 54-7525
The 2020 NAISH HERO 140×43 40CM is designed to take riders from their first reaches and beyond in this user-friendly freeride board. The Hero is not easily outgrown—nor is it only for beginners—the high flex Hero provides a smooth, forgiving ride and on-demand control that even the most experienced kiters love.
https://murrays.com/products/naish-torx-t30-screw-driver
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/naish-torx-t30-screwdriver-naish-com.jpg?v=1715129070
NAISH TORX T30 SCREW DRIVER
https://murrays.com/products/robline-dinghy-star-pro-4mm-brown
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39-1504BR.jpg?v=1719431093
DINGHY STAR PRO 4MM
Robline Dinghy Star Pro - Grand Prix Spinnaker single launch line system
Murrays Part# 39-1504BR
Robline Dinghy Star Pro - Cover utilizes PBO and Dyneema SK78 for extreme abrasion resistance and a Dyneema SK99 core for minimal elongation. The PBO and Dyneema combination reduces friction in single line spinnaker launch systems, making it significantly faster and easier to launch and douse the spinnaker.
Offers the highest abrasion resistance and least stretch, perfect for fast skiff and dingh
https://murrays.com/products/illustrated-parts-list-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-0200-300x300.png?v=1741706557
PRINDLE ILLUSTRATED PARTS LIST
https://murrays.com/products/re-minimalist-eva-foot-strap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/3232575032_MINIMALISTEVAFOOTSTRAP_NA_23X_MAIN_720x_fa01d772-3f2b-447c-9a35-5e31b1b1ddae.jpg?v=1715129085
RIDE ENGINE MINIMALIST EVA FOOT STRAP
Less can be more. Don't believe us? Then check out our Minimalist Foot Strap, built with thermoformed EVA, it's the perfect strap if you want to stay connected but also want to get free quickly. The Minimalist Foot Strap's webbing reinforcement lays virtually flat when paddling and pops up when not under pressure, making it a primo choice for sinker wing boards, tow boards, and freeride kite-foil boards.
https://murrays.com/products/rudder-hold-down-nacra-1
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-1002-300x300.jpg?v=1737678846
NACRA RUDDER HOLD DOWN
Nacra Rudder Hold Down
Murrays Part #56-1002
Rudder hold down for Nacras
Nacra Sailing factory item# 30002
https://murrays.com/products/hull-plug-prindle-new-rubber
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-1015.jpg?v=1717440445
PRINDLE NEW RUBBER HULL PLUG
Prindle New Rubber Hull Plug
Murrays Part# 56-1015
Solid rubber hull plug for Prindle's fits into 1-5/8″ diameter hole. This part is not as clean of a fit as the original part. Some silicone may help with placement.
Nacra Sailing factory item #30378
https://murrays.com/products/centerboard-p18-2-19
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/mic-repair-bbt-headset
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/52-2509.jpg?v=1732036397
BBTALKIN' MIC REPLACEMENT
BBTalkin' Replacement Mic
Murrays Part# 52-2509
The BBTalkin' Replacement Mic is a replacement part for both the Gath and Universal BBtalkin' headsets. Includes: waterproof microphone, screws, and o-ring.
https://murrays.com/products/bluetooth-speaker-pads-w-short-mic-v2-0
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/52-2512-1.jpg?v=1732037009
BBTALKIN' BLUETOOTH MICROPHONE AND SPEAKER
BBTalkin Bluetooth Microphone & Speaker Universal Helmet Earpiece Kit (Stereo)
https://murrays.com/products/speaker-repair-bbt-headset
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/52-2510.jpg?v=1732036150
BBTALKIN' HEADSET SPEAKER REPLACMENT
BBTalkin replacement headset speaker
https://murrays.com/products/blue-tooth-speaker-and-mic-for-gath-neo-helmets
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/52-2512MG-1.jpg?v=1732036755
BBTALKIN' BLUETOOTH GATH HELMET MICROPHONE & SPEAKER EARPIECE KIT
BBTalkin Speaker and Mic for Gath EVA and Neo Helmets
https://murrays.com/products/rudder-cast-upper-h18-used
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/mast-base-casting-p18-2-19
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-6905.jpg?v=1751927446
PRINDLE 18.2 AND 19 MAST BASE CASTING
Prindle mast base casting 6905
https://murrays.com/products/nut-eye-rudder
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30363_1-wxh.jpg?v=1715129105
NUT EYE RUDDER
https://murrays.com/products/masthead-sheave-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30185_1-wxh.jpg?v=1715129109
NACRA MAST HEAD SHEAVE
NACRA MAST HEAD SHEAVE - 30185
https://murrays.com/products/torx-tool-handle-t30
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/8264725-23.jpg?v=1715129112
TORX TOOL HANDLE T30
Torx Tool Handle T30
Murrays Part# 001-7005
https://murrays.com/products/fly-wing-waist-wrist-leash-set
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/dakine-2022-wing-leash-combo-set-1.jpg?v=1725656009
DAKINE FLY WING WAIST/WRIST LEASH SET
https://murrays.com/products/sk78-soft-shackle-4mm-grey
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-DSH4.webp?v=1719350737
ROBLINE 4MM SMALL SOFT SHACKLE SK78
Ronstan Small Soft Shackle - 4mm SK78
Murrays Part# 21-DSH4
The Robline Small Soft Shackle is a great alternative to the metal shackle, with no clevis pins to loose in the water or sand. Soft shackles are also very easy on the boat as they are soft and flexible
Quick and easy way to attach jib clew blocks to the jib and the main sheet blocks to the main sail.
https://murrays.com/products/mast-step-hinge-prindle-all
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-6815.jpg?v=1718809450
PRINDLE MAST STEP HINGE
Mast Step Hinge
Murrays Part# 56-6815
Designed and built to meet or exceed original OEM.
Mast step hinge for all Prindles. Use two #56-F128 mast step hinge pins.
Nacra Sailing factory item# 30455
https://murrays.com/products/mast-hd-base-sheave-nac-p18-19
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-6804-2-1.jpg?v=1719432682
PRINDLE 18/19 RONSTAN MAST HEAD SHEAVE
Prindle 18/19 Ronstan Mast Head Base Sheave
Murrays Part# 56-6804
Replacement sheave for mast base on Prindle 15, 18, 18.2, 19 and Nacra 2003 and later mast head. Sheave measures 1-1/8" diameter x 3/8" wide. Please note that this item replaces #6803 that is no longer available.
https://murrays.com/products/bbt-helmet-mount
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/52-2528.jpg?v=1732036527
BBTALKIN' HELMET MOUNT
The BBT Helmet Mounts have a slide and lock technology, locking the two tabs on the back of your waterproof case which houses your BbTALKIN unit.
https://murrays.com/products/owners-manual-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-9558-300x300.png?v=1741648718
NACRA OWNERS MANUAL
https://murrays.com/products/mast-head-casting-new-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-6602-1.jpg?v=1723131865
NACRA MAST HEAD CASTING
Nacra Mast Head Casting
Murrays Part# 56-6602
Nacra mast head casting is for Nacra Models 5.0/5.2/5.5/5.7/5.8/6.0/18SQ
Nacra Sailing factory item# 30176
https://murrays.com/products/jib-sail-race-n6-0na-white
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nacra-tie-bar-uro-rod-w-string
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-30127-2_2.jpg?v=1719941870
NACRA URETHANE TILLER TIE BAR ROD WITH STRING
https://murrays.com/products/main-halyard-sheave-euro
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/51-13041700.jpg?v=1713382384
RONSTAN MAST HEAD SHEAVE (EUROPEAN)
Ronstan Mast Head Sheave (European)
Murrays Part# 51-13041700
This is a downhaul sheave for the basic Hobie 16 Downhaul system. Hobie Europe factory replacement "halyard" sheave. But by the looks of their parts list its a down haul sheave that goes on the bottom of the gooseneck.
https://murrays.com/products/tang-inter-lower-diamond
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-6610.jpg?v=1723132824
NACRA LOWER DIAMOND TANG
Lower Diamond Tang
Murrays Part# 56-6610
Lower diamond tang for Inter, Nacra 500 and 570
Mount with six #19-5031 rivets
Use rivet casings if you want to seal the mast
Performance Sports Factory item# 6610
Nacra Sailing Part# 30183
https://murrays.com/products/daggerboard-carpet-per-foot
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-1082_carpet.jpg?v=1719502984
DAGGERBOARD CARPET
Daggerboard Carpet
Murrays Part# 56-1082
Approximately 1-1/2″ wide carpet installs in daggerboard wells.
Nacra factory item #1083.
Sold by the foot.
https://murrays.com/products/mast-rotator-wishbone-bare
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-30701.jpg?v=1723131768
NACRA MAST ROTATOR WISHBONE BARE
https://murrays.com/products/mast-rotator-wishbone-assembled
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-30701A.jpg?v=1721835148
NACRA ASSEMBLED MAST ROTATOR WISHBONE
https://murrays.com/products/xb-endcap-right-rear-p19-18-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-3902-1-400x400.jpg?v=1737749973
PRINDLE RIGHT REAR CROSSBAR END CAP
Right Rear Crossbar End Cap
Murrays Part# 56-3902
Prindle Right Rear Crossbar End Cap P19, 18-2 is a right rear crossbar end cap for Prindle 19 and 18-2.
Performance Sports factory item# 3902
https://murrays.com/products/xb-endcap-left-rear-p19-18-2
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-3903-1-400x400.jpg?v=1737749736
PRINDLE LEFT REAR CROSSBAR END CAP
Left Rear Crossbar End Cap
Murrays Part# 56-3903
The Prindle Left Rear Crossbar End Cap is for the Prindle 19 and 18-2 cats
Performance Sports factory item# 3903
https://murrays.com/products/rudder-casting-only-rt-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-4005.jpg?v=1721238317
PRINDLE RIGHT RUDDER CASTING
Right Rudder Casting
Murrays Part# 56-4005
Right rudder casting for all Prindles does not include hardware.
Nacra Sailing factory item# 30413
https://murrays.com/products/rudder-upper-roller-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-4009.jpg?v=1721238095
PRINDLE UPPER RUDDER ROLLER
Upper Rudder Roller
Murrays Part# 56-4009
This plastic spacer/ roller is used in the locking mechanism of Prindle Rudder systems. It is also used as a boom roller.
https://murrays.com/products/spacer-plastic-lower-rudder
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-4014.jpg?v=1723132929
PRINDLE LOWER RUDDER PLASTIC SPACER
Prindle Rudder Lower Plastic Spacer
Murrays Part# 56-4014
Prindle Rudder Lower Plastic Spacer is used on the rudder systems of all Prindle models. Performance Sports factory item #4014. 9/16″ wide x 1/2″ diameter, 1/4″ hole.
https://murrays.com/products/rudder-casting-assy-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-4501-300x300.jpg?v=1737757245
NACRA RUDDER CHEEK CASTING
Rudder Cheek Casting
Murrays Part# 56-4501
This rudder casting from Nacra Australia is an improvement over original equipment. A nylon insert reduces contact of the rudder and casting, resulting in smooth rudder pivoting. The casting includes a built-in roller for the rudder pull-down line that reduces friction, plus replaceable nylon inserts for the rudder pins to reduce wear on the casting.
Fits all Nacras (4.5, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI, 18SQ).
Nacra Sailing factory item# 30107
https://murrays.com/products/mast-base-casting-carbon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-6605car.jpg?v=1723131562
NACRA CARBON MAST BASE CASTING
Carbon Mast Base Casting
Murrays Part# 56-6605CAR
The Nacra Carbon Mast Base Casting is a replacement mast base casting for Inter 17, 18, 20 and Nacras with a carbon masts. Replaces the 56-6626, Nacra Sailing item #30178 mast base which is no longer being made. Does not include any fixtures for downhaul sheaves. Made in Australia.
If your mast is aluminum, you need a different part!
https://murrays.com/products/rudder-spring-prindle-nacra
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-4016.jpg?v=1721237575
NACRA/PRINDLE RUDDER SPRING
NACRA and Prindle Rudder Spring
Murrays Part# 56-4016
The NACRA and Prindle Rudder Spring is the rudder spring for all Prindle and most newer Nacras (Late Model US boats, Inters and all European NACRA boats) is Nacra Sailing factory item #30418.
Fits Nacra 460, Nacra 500, Nacra 570, Nacra 16, Nacra 17, Nacra F18 Infusion, Nacra F20 Carbon and all Inters.
https://murrays.com/products/rudder-locking-bolt-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-4017.jpg?v=1721237493
PRINDLE RUDDER LOCKING BOLT
Rudder Locking Bolt
Murrays Part# 56-4017
The Prindle Rudder Locking Bolt is the factory replacement bolt for rudder locking system on all Prindles.
Tip: Be sure to check for proper alignment of the lock bolt to spring bolt. Any bent component will prevent the system from working properly. Identify and replace the bent portion to get your rudder system functioning properly.
Performance Sports factory item# 4017
https://murrays.com/products/rudder-lock-bolt-nut-prindle
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-4018.jpg?v=1721238439
PRINDLE/NACRA RUDDER LOCK BOLT NUT
Prindle Rudder Lock Bolt Nut
Murrays Part# 56-4018
The Prindle Rudder Lock Bolt Nut is the factory replacement 3/8″ hex nut for rudder lock bolts on all Prindles.
Also used as the jam nut for adjuster screw on Nacra bridle foil assembly.
Nacra Sailing factory item #30420.
Prindle part number 4018
https://murrays.com/products/kisme-it-traveler-each
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/000-0200.jpg?v=1736969807
KISME "IT" TRAVELER-EACH
https://murrays.com/products/open-skiff-mast-complete
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Image_clat_ref_open_skiff_1.jpg?v=1715129195
O'PEN SKIFF MAST 390cm
https://murrays.com/products/carbon-mast-head-yoke-inter-17-18-20
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-6621.jpg?v=1732062485
NACRA CARBON MAST HEAD YOKE
Nacra Carbon Mast Head Yoke Inter 17, 18, 20
https://murrays.com/products/self-tacking-clew-plate-kit
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/rudder-casting-lower-mkiii
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/40100-3_1-wxh.jpg?v=1715129202
NACRA RUDDER CASTING LOWER MKIII
Nacra Rudder Casting Lower MKii
Murrays Part# 56-40100-3
https://murrays.com/products/snap-hook
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Ronstan_20International_RF533xxe72b82.jpg?v=1715129207
RONSTAN SNAP HOOK
Ronstan Snap Hook
https://murrays.com/products/safety-hasp-3-11-16-314ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/7751.jpg?v=1715129211
SAFETY HASP 3-11/16" 314 SS
https://murrays.com/products/ion-footstrap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/48210-7081_Footstrap_01_black_front.png?v=1715129215
ION FOOTSTRAP
Ion Footstrap
Murrays Part# 54-1040
Ion Footstrap, has an adjustable emergency opening during crashes. Adjustable size, comfy on your feet.
https://murrays.com/products/clamcleat-racing-2-5mm-port
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/cl259_an-colours-1200x1200_2_16b31f98-1023-4038-be7e-6615cd5dce4f.jpg?v=1715129218
CLAMCLEAT RACING 2-5mm PORT
Clamcleat Racing 2-5mm Port
Murrays Part# 27-0259
The tooth design of the CL259 Racing Fine Line (Port) allows a quick, positive lock that is easy to release. Add this to its low profile and ability to hold high loads, makes it an ideal cleat for adjusting leech lines on larger sails. Use a backplate when riveting a cleat onto fabric to prevent the rivet pulling through. It can be mounted in two positions and can be sewn or riveted to the sail. The CL259 is usually fitted to the Starboard side of a
https://murrays.com/products/clamcleat-racing-2-5mm-strbd
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/cleat-cl258_an-1200x1200_1_7d598e2e-8584-4d75-9d4a-5d575f976774.jpg?v=1715129222
CLAMCLEAT RACING 2-5MM STARBOARD
Clamcleat Racing 2-5mm Starboard
Murrays Part# 27-0258
The tooth design of the Clamcleat® CL258 Racing Fine Line (Starboard) allows a quick, positive lock that is easy to release. Add this to its' low profile and ability to hold high loads, makes it an ideal cleat for adjusting leech lines on larger sails. Use a backplate when riveting a cleat onto fabric to prevent the rivet pulling through. It can be mounted in two positions and can be sewn or riveted to the sail.
https://murrays.com/products/3-16-eye-strap
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-3008.jpg?v=1712270880
3/16" EYE STRAP
3/16" Eye Strap
Murrays Part# 56-3008
https://murrays.com/products/prop-guard-torq-503-1003-molded-cap
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/clamcleat-side-entry-starbd
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/cleat-cl217mk2_an-1200x1200_1_1.jpg?v=1715129230
CLAMCLEAT SIDE ENTRY-STARBOARD
Clamcleat Side Entry-Starboard
Murrays Part# 27-0217
The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Ideal as a reaching hook. Also used on sport nets AND sun sails.
The Clamcleat® CL217 Mk1 is available in two finishes:
CL217 Mk1 has a silver stove enamel finish for a cost effective, high quality coating.
CL217 Mk1AN has a hard anodized finish to give a hard wearing surface.
https://murrays.com/products/verticle-bow-pole
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/micro-track-ends
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/nylon-spacer
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-4011.jpg?v=1723133050
PRINDLE RUDDER SPACER
Nylon Spacer
Murrays Part# 56-4011
Prindle rudder spacer, Prindle part number 4011.
https://murrays.com/products/spinnaker-wire-tang-i-17
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/grease-multi-purp-marine-2oz
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/40-0352.jpg?v=1741022570
MULTI-PURPOSE MARINE GREASE 2oz
https://murrays.com/products/the-pickle-wax-remover
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/OOPIC0000000000_1.jpg?v=1738781221
THE PICKLE WAX REMOVER
The Pickle Wax Remover
Murrays Part# 40-4020
Pickle Wax Remove is carefully designed to maintain and remove the wax on your surfboard. Perfectly sized with the right amount of rigidity and flexibility, this wax comb is the right tool for the job. Unless the job is hair or music related, in which case we recommend a different comb.
Pickle Wax Remover with Sticky Bumps Comb Kit Features:
One (1) Pickle Wax Remover with Sticky Bumps Comb Kit from Pickle Wax Remover
https://murrays.com/products/sealskinz-socks-l-10-11
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38-320_-300x300.png?v=1741646974
SEALSKINZ WATERPROOF SOCKS
https://murrays.com/products/pant-lycra-protec-2-0-s
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/forward-wip-lycra-pro-tec-pant-400x400.jpg?v=1738358817
FORWARD WIP PROTEC PANT-SMALL
https://murrays.com/products/lycra-l-s-t-wip-gray-14
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/long-sleeves-lycra-grey-300x300_0020cb9c-3ae5-4838-b020-833f040ed252.jpg?v=1740518581
FORWARD LONG SLEEVE TOP-JR14
https://murrays.com/products/lycra-l-s-t-wip-gray-m
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/long-sleeves-lycra-grey-300x300.jpg?v=1740518449
FORWARD LONG SLEEVE TOP-MEDIUM
Forward Long Sleeve Lycra Rashguard Top
Murrays Part# 47-1492
Keep harness and vest straps secure while staying comfortable, aerodynamic in the Forward breathable Lycra rashguard. The Lycra rashguard from Forward Sailing features a mid neck collar and buckle slot for your trapeze hook. Perfect for kiting, windsurfing and sailing!
Size: Medium
https://murrays.com/products/lycra-l-s-t-wip-gray-l
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/long-sleeves-lycra-grey-300x300_d2f4b08c-8109-4947-895c-c8d257d67d1c.jpg?v=1740518560
FORWARD LONG SLEEVE TOP-LARGE
https://murrays.com/products/shorts-fwd-sail-dry-bk-sm
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/dryshort.jpg?v=1732061180
FORWARD WIP DRY SAILING SHORTS - SMALL
Forward WIP Dry Sailing Shorts - Size Small
https://murrays.com/products/split-cable-cover-5-32
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/53-100.jpg?v=1676951663
SPLIT CABLE COVER 5/32"
https://murrays.com/products/hydroturf-diamond-40x62-psa-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/EVA-FOAM-DECK_TRACTION-colors.png?v=1736808937
DAIMOND CUT EVA FOAM DECK/RAIL GRIP SHEET
DAIMOND CUT EVA FOAM DECK/RAIL GRIP SHEET 40x62"
Peel and stick diamond cut EVA foam sheet for rail and deck grip on all Hobie, Nacra, Prindle catamarans, Surfboards, Paddleboards, Dingy, Keel boat traction.
Easy to install traction pads for Hobie rails and hulls. EVA foam does not absorb water, adds some padding as well. Sheets can be cut into strips for anywhere traction or padding is wanted or it can be used to cover the hull for padding grip and UV protection. Great for older boats as well
https://murrays.com/products/pant-lycra-protec-2-0-xxl
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/forward-wip-lycra-pro-tec-pant-400x400_f2dd4557-2a82-470b-a662-4fb4d6c5af6d.jpg?v=1738362882
FORWARD WIP PROTEC PANT - XXL
Forward WIP Lycra ProTec Pant 2.0-XXL
Murrays Part# 47-0515
The Forward WIP Lycra ProTec Pant is a "Game Changer"! Imagine: Sail without concern for cut or bruised knees or shins. Perhaps the first Lycra based sailing pant, the Forward WIP Pro-Tec pant features 6mm thermoformed protection for the knees.
https://murrays.com/products/pant-3-4-short-neo-2mm-s
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/wip-neo-short-34-2mm-hikking-400x400.jpg?v=1740527349
FORWARD WIP 3/4" PANT - SMALL
https://murrays.com/products/blue-universal-pigtail
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/54-4408-12.jpg?v=1741123703
UNIVERSAL PIGTAIL-BLUE
Universal Pigtail-Blue
Murrays Part# 54-4408-12
The Universal Kite Pigtail is an 6" pigtail with a knot and a knot/loop. The universal pigtail can be used with any kite on any knot/loop combination. They can be used as a knot and loop combination, a loop and loop combination, and you can add a second knot to make a knot and knot combination. The Universal Pigtails can be used to replace your current kiteboarding pigtail set or just a part of it. Typically pigtails are used in sets of 8 w
https://murrays.com/products/red-universal-pigtail
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/54-4408-13.jpg?v=1741124023
UNIVERSAL PIGTAIL-RED
Universal Pigtail-Red
Murrays Part# 54-4408-13
The Universal Kite Pigtail is an 6" pigtail with a knot and a knot/loop. The universal pigtail can be used with any kite on any knot/loop combination. They can be used as a knot and loop combination, a loop and loop combination, and you can add a second knot to make a knot and knot combination. The Universal Pigtails can be used to replace your current kiteboarding pigtail set or just a part of it. Typically pigtails are used in sets of 8 with 4 o
https://murrays.com/products/f-one-56-mitu-pro-carbon-series
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/mitu-pro-carbon-series-2022-650x650_1.png?v=1730145763
F-ONE 5'6" MITU PRO CARBON SERIES
https://murrays.com/products/uphaul-pro-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Mystic-Pro-Uphaul-Black-300x300.jpg?v=1738624636
MYSTIC PRO UPHAUL-BLACK
Mystic Pro Uphaul-Black
Murrays Part# 57-1693210
The Mystic Pro Uphaul is a windsurfing uphaul line for retrieving the mast out of the water.
Features:
Elastic tubular webbing
Soft padding
Elastic loop
Fixed loop
https://murrays.com/products/carbon-powerstick-telescoping-tiller-68-131
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Powerstick.jpg?v=1715782107
POWERSTICK TELESCOPING CARBON TILLER EXTENSION 68-130"
https://murrays.com/products/wire-3-32-1x19-black-coated
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Wire_3_32_1X19_Black_Coated_316_stainless_steel_cable_is_the_gold_standard_for_marine_rigging_applications.jpg?v=1733332290
WIRE 3/32" 1X19 BLACK COATED
Wire 3/32" 1X19 Black Coated
316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has a extremely high load bearing capacity. PVC coating increases UV and abrasion resistance.
Price sold by the foot
https://murrays.com/products/wire-3-32-1x19-white-coated
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/whitecoatedwire_5dcb8065-2fa9-492b-ab49-f6f11a6e5273.jpg?v=1733358401
WIRE 3/32" 1X19 WHITE COATED
https://murrays.com/products/wire-1-8-1x19-black-coated
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-0031.jpg?v=1733335494
WIRE 1/8" 1X19 BLACK COATED
316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. PVC coating increases UV and abrasion resistance.
Price sold by the foot
https://murrays.com/products/wire-1-8-1x19-white-coated
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/whitecoatedwire.jpg?v=1733353984
WIRE 1/8" 1X19 WHITE COATED
Wire 1/8" 1X19 White Coated
Murrays Part# 002-0041W
316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. PVC coating increases UV and abrasion resistance.
Features
316 Stainless Steel
Stiff and Low Stretch
Highly Polished for Marine Use
One Strand Consisting of 19 Wires
White PVC Coated
Sold by the foot
https://murrays.com/products/wire-5-32-1x19-black-coated
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-0031_dadb73cf-09fb-41c4-ac0b-e7edc19e4a51.jpg?v=1733335511
WIRE 5/32" 1X19 BLACK COATED
Wire 5/32" 1X19 Black Coated
316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. PVC coating increases UV and abrasion resistance.
Price sold by the foot
https://murrays.com/products/h-21-bridle-5-32-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_b3152f02-563c-41d4-879e-5a4127ec5c53.jpg?v=1676953110
H-21SE BRIDLE 5/32" BLACK WIRE
H21 Special Edition Bridle 5/32" Wire
Murrays Part# 002-0515-22
One bridle for Hobie® 21SE (Special Edition) is constructed of 5/32" wire to factory specifications.
The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front trampoline.
Use this page to order product numbers:
002-0515-21 White
002-0515-22 Black
https://murrays.com/products/nicopress-oval-3-32-cop-znc
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/oval_db929779-e6c5-48ec-901c-9ae2003a1bf6.jpg?v=1733349357
NICOPRESS OVAL 3/32" COP/ZNC
Nicopress Oval 3/32" Copper/Zinc
Murrays Part# 002-1030
Nicopress Oval- Locks wire rope to a thimble terminal. Close with an appropriate swaging tool for maximum strength. Each.
Use this page to order ovals with item numbers 002-1020, 002-1030, 002-1040 and 002-1050.
https://murrays.com/products/nicopress-oval-1-8-cop-znc
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/oval_645fd3c6-9fab-441c-a2c4-18f2e2e7a816.jpg?v=1733349398
NICOPRESS OVAL 1/8" COP/ZNC
Nicopress Oval 1/8" Copper/Zinc
https://murrays.com/products/stop-sleeve-1-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-1041.jpg?v=1721244273
STOP SLEEVE 1/8"
https://murrays.com/products/staymaster-turnbuckle-1-8
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1043.jpg?v=1676950394
STAYMASTER TURNBUCKLE 1/8
The Staymaster Turnbuckle - No more hit-and-miss wire tensioning! Shorten your diamond wires and use an adjustable tension mechanism to easily repeat tension settings
https://murrays.com/products/marine-eye-1-8-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/MarineEye.jpg?v=1733420007
MARINE EYE 1/8" (SS)
Marine Eye 1/8" Stainless Steel
Murrays Part# 002-1044
The Marine Eye (Stainless Steel) - Special machinery is required for the installation of this marine eye fitting. Choose from 3/32", 1/8" or 5/32"
1/4" hole in the end
https://murrays.com/products/marine-fork-1-8-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1055_2.jpg?v=1676950015
MARINE FORK 1/8" (SS)
https://murrays.com/products/nicopress-oval-5-32-cop-znc
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/oval.jpg?v=1733349178
NICOPRESS OVAL 5/32" COPPER/ZINC
Nicopress Oval 5/32" Copper/Zinc
https://murrays.com/products/stop-sleeve-5-32
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/download_d0ff72ed-8129-4f38-bcb1-1864ba56dbae.jpg?v=1733418941
STOP SLEEVE 5/32"
https://murrays.com/products/marine-eye-5-32-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/MarineEye_44a67b2b-e191-4c0f-bd56-dde94d3308e7.jpg?v=1733420125
MARINE EYE 5/32" (SS)
https://murrays.com/products/marine-fork-5-32-ss
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/02-1055_2-300x300.jpg?v=1741646245
MARINE FORK 5/32" (SS)
Marine Fork 5/32" (Stainless Steel)
Murrays Part# 002-1055
Special machinery is required for installation of this stainless steel marine fork fitting.
Use this page to order product numbers 02-1035 3/32", 02-1045 1/8" and 02-1055 5/32". The measurements here indicate the wire diameter they are designed to be used on.
Fits 1/4" clevis pin.
https://murrays.com/products/stop-sleeve-3-16
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/download_57d2bebb-c338-465a-ae06-d024861fe75e.jpg?v=1733419068
STOP SLEEVE 3/16"
Stop Sleeve 3/16"
Murrays Part# 002-1061
A stop sleeve grips a single wire to provide a "stop" for halyard hooks or trapeze handle, etc. A special "J" size opening on a nicro press tool is required for closing 3/32" and 1/8" stops; 5/32" stop requires "M" opening.
https://murrays.com/products/sol-18-bridle-1-8-bk
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Bridle_BK-252x300.jpg?v=1733851267
SOL-18 BRIDLE 1/8" BLACK WIRE
Sol Cat 18 Bridle 1/8"
Murrays Part# 002-6214-02
Single bridle for Sol Cat 18 Bridle 1/8" is constructed to factory specifications.
https://murrays.com/products/303-protectant-gallon
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/AEROSPACEPROTECTANT303GALLON.jpg?v=1712272522
303 PROTECTANT GALLON
303 AEROSPACE UV PROTECTANT GALLON
https://murrays.com/products/nacra-inf-18-bridle-bare-5-32
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-5815-20.jpg?v=1676952577
NACRA INFUSION 18 BRIDLE 5/32" BARE WIRE
Nacra Inf-F18 Bridle Bare 5/32
Murrays Part# 002-5815-22
This bridle will fit F18 Infusion Mki MKii and MKiii boats. Due to the variations in production. Please check and confirm your boat's dimensions before ordering. The MKi boat had 5 different factory rigging lengths.
https://murrays.com/products/kite-safety-leash-short-black
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Black-Short-Leash-300x300.jpg?v=1733936619
MYSTIC SHORT KITE SAFETY LEASH
Mystic Short Kite Safety Leash
Murrays part# 57-1637030
The Mystic Short Kite Safety Leash features a push away quick release and a carabiner style attachment clip. Short leashes are recommended for all kiters who do not ride unhooked.
Features
45cm length (unstretched)
Soft touch, lightweight material
Compact carabiner
Mystic 2.0 compact quick release
Neoprene carabiner cover
Designed for freeride / wave performance
Minimum length, maximum reach
https://murrays.com/products/handlepass-loop-38mm-m
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/88631_6dca3ed8ca21660f004c2e21e5df50afed9539fc.webp?v=1734722706
MYSTIC HANDLEPASS LOOP - M/L
The Handlepass Loop is made of Dyneema rope and covered in rubber for easy pulling and sliding. It is attached easily to the buckles of the webbing on your harness, designed for freestyle riders who want to unhook and perform handlepasses. The Handlepass Loop comes attached with the Mystic softshell harnesses.
https://murrays.com/products/handlepass-loop-38mm-l
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/88631_6dca3ed8ca21660f004c2e21e5df50afed9539fc_42dcc24b-0a5f-48d5-b0f0-81e8a4868450.webp?v=1734728807
MYSTIC HANDLEPASS LOOP - XL / XXL
The Handlepass Loop is made of Dyneema rope and covered in rubber for easy pulling and sliding. It is attached easily to the buckles of the webbing on your harness, designed for freestyle riders who want to unhook and perform handlepasses. The Handlepass Loop comes attached with the Mystic softshell harnesses.
https://murrays.com/products/ultralight-carbon-kite-bar-50cm
2026-04-13T23:58:36-07:00
daily
https://murrays.com/products/hobie-16-main-batten-104
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Short_yellow_batten_with_black_luff_cap.jpg?v=1719506598
H-16 MAINSAIL FIBERGLASS BATTEN 104"
104" Hobie batten part number 21000001
https://murrays.com/products/hobie-16-main-batten-97-5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Short_yellow_batten_with_black_luff_cap.jpg?v=1719506598
H-16 MAINSAIL FIBERGLASS BATTEN 97.5"
104" Hobie batten part number 21000001
https://murrays.com/products/hobie-16-main-batten-91
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Short_yellow_batten_with_black_luff_cap.jpg?v=1719506598
H-16 MAINSAIL FIBERGLASS BATTEN 91"
104" Hobie batten part number 21000001
https://murrays.com/products/hobie-16-main-batten-82-5
2026-04-13T23:58:36-07:00
daily
https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Short_yellow_batten_with_black_luff_cap.jpg?v=1719506598
H-16 MAINSAIL FIBERGLASS BATTEN 82.5"
104" Hobie batten part number 21000001