https://murrays.com/ daily https://murrays.com/products/1-2-ball-nylon 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-0059.jpg?v=1733248320 NYLON 1/2" BALL 1/2 BALL (NYLON) - Hobie half round washer spacer tiller connector - Hobie part number 11510000 HOBIE HALF SPHERE TILLER CONNECTOR https://murrays.com/products/10-hole-shroud-adjuster 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-hole-adjuster.jpg?v=1754407470 10 HOLE SHROUD ADJUSTER 10 Hole Hobie shroud adjuster https://murrays.com/products/3-4-x-3-16-stainless-steel-ring 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-3525.jpg?v=1676949546 WELDED STAINLESS STEEL RING 3/16"x3/4" https://murrays.com/products/4-access-port-with-lip 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-1191wh_2.jpg?v=1778625644 4" PORT FLAT SCREW WITH LIP-WHITE Port Flat 4" Screw with Lip White Murrays Part# 001-1191WH 4" Access Port With Lip Two piece screw-in 4" Access Port includes one deck ring and one lid. The deck ring is designed to install on a flat surface. The lip accommodates a Cat Bag (sold separately). This hatch is used on the flat locations on forward part of Nacra hull and has been used on Hobies and Prindles as well. Does not include hardware, hardware options shown in the related items section below. Flat Access Ports The https://murrays.com/products/3-hole-pad-kit-hobie-and-prindle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0110.jpg?v=1676949546 3-HOLE PAD KIT 3-Hole Pad Kit Murrays Part# 001-0110 This base kit is for Harken®, Hobie® or Murray 360 cleats without swivel base adapters. Kit includes one 3-hole base, one swivel base adapter (#25-3001), plus three #10 FHSMS (#19-1626). Ronstan swivel 360 cleats include swivel base adapters, so this kit is not necessary. Fits Hobie® or Prindle elliptical crossbar. https://murrays.com/products/29mm-harken-pivoting-block-with-carbo-cam 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0396.jpg?v=1676949547 HARKEN 29MM PIVOTING LEAD BLOCK-CARBO-CAM CLEAT Harken 396 - 29mm Harken 180 Pivoting Block with Carbo-Cam, downhaul, Hobie. https://murrays.com/products/40mm-harken-block-pivot-180-with-cam-matic 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2156.jpg?v=1676949549 HARKEN 40MM PIVOTING LEAD BLOCK- CAM-MATIC CLEAT Harken 2156 40mm Pivot 180 Block with Cam https://murrays.com/products/5-flat-access-port 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-1195wh.jpg?v=1778625626 5" PORT FLAT SCREW WITH LIP WHITE Murrays Part# 001-1195WH 5" Flat Access Port The 5" Flat Access Port is designed to install on a flat surface. Each hatch includes one deck ring and one lid. A lip accommodates a Cat Bag (sold separately). For Hobie® 20 and Tiger. This also fits the NACRA 15 and fits much like the VIKING access ports. Customers tend to prefer this style to the ports that became stock in 2018. Does not include hardware, hardware options shown in the related items section below. Compare to NACRA part number 30365 Compare https://murrays.com/products/6-cat-bag 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-4212_cat_bag_for_assess_port_7779c6c9-9c46-44a0-a0cf-9420b905af92.jpg?v=1715121383 6" CAT BAG (SCREW-IN) The 6″ Cat Bag provides a handy storage pouch inside your access ports for snacks, drinks, tools and more. Designed to fit 6″ access ports that have a inner ring for them to sit on https://murrays.com/products/6-access-port-with-lip 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-4210wh-2-rotated.jpg?v=1715127268 6" ACCESS PORT WITH LIP 6" Access Port with Lip Murrays Part# 001-4210WH The 6" Access Port with Lip is standard on the Hobie 18 and newer Prindle cats and it is an excellent upgrade for older Prindles. Ports can be installed on any flat deck, including kayaks, where there is 8-1/2" of flat surface available. These ports come with the inner lip so they are compatible with the 6"cat bag. Does not include hardware, hardware options shown in the related items section below. White port is Murrays #01-4210WH. Compare to Hobie Cat® # https://murrays.com/products/adapter-pad-3-hole-hobie-prindle-elliptical 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0109.jpg?v=1676949553 3-HOLE ADAPTER PAD 3-Hole Adapter Pad Murrays Part# 001-0109 Our 3-hole adapter pad fits a Hobie® or Prindle elliptical crossbar. Polyurethane bases provide flat mounting surfaces for mast rotation control cleats, barberhauler cleats, or Hobie® 16 jib trim cleats. Use to mount small Ronstan C-Cleat (#21-5000) or Ronstan Small or Large Swivel 360 Cleats (#21-0067 or #21-0058). Each base can be port or starboard, depending on how cleats are installed. https://murrays.com/products/7-hole-shroud-stay-adjuster 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/25-3310.jpg?v=1719943240 SHROUD STAY ADJUSTER 7-HOLE Shroud Stay Adjuster 7 Hole Murrays Part# 25-3310 Stainless steel shroud adjuster with seven 1/4" holes. ​Use #22-9802 clevis pin at top and #22-9808 at bottom. Fits: H14/16/18/20, Wave and Getaway. Compare to Hobie Part# 20830010 Nacra - Prindle part number 9893 https://murrays.com/products/telescoping-tiller-extension 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Aluminum_Adjustable_tiller_extension_for_Hobie_Nacra_and_Prindle_catamarans._Compare_to_Hobie_20550001_Hobie_hot_stick.png?v=1733166154 TELESCPOING TILLER EXTENSION 50"-95" Aluminum Adjustable tiller extension for Hobie, Nacra and Prindle catamarans. Compare to Hobie 20550001 Hobie hot stick https://murrays.com/products/air-flow-tels-red-green-set-of-14 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-0334.jpg?v=1676949554 AIR FLOW TELS SET Air Flow Tels Set Murrays Part# 007-0334 Air-flow Tels are wind-on-the-sail indicators that show the air flow across the sails, allowing you to trim sails for maximum performance. The result is better boat speed, less pinching, and no guesswork about placing the jib sheet lead forward or aft. No holes are required in the sails; waterproof adhesive locator discs attach the Tels. Tels are made of ripstop nylon for maximum sensitivity and long life. https://murrays.com/products/anti-pitchpole-hydrofoil 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3240.jpg?v=1676949558 ANTI-PITCHPOLE HYDRO FOIL (PR) https://murrays.com/products/axle-extender-h21-tornado 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/base-pad-flat-3-hole 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3001.jpg?v=1676949563 BASE PAD: FLAT 3-HOLE Base Pad: Flat 3-Hole Murrays Part# 25-3001 Use to mount a swivel cam to any flat surface. This adapter is not necessary when using Hobie's Offset Base Pad #07-1162. https://murrays.com/products/base-pad-universal-you-drill 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-8014.jpg?v=1676949565 BASE PAD UNIVERSAL U-DRILL Base Pad Universal U-drill  Murrays Part# 001-8014 This "potato chip" (2" OD) pad fits or can be modified to fit almost any main beam or mast extrusion for use with Harken micro cleats with fairleads or Ronstan small cleats with fairleads. To modify, put sandpaper on beam and rub base pad to suit and/or fill gap with silicone sealant and allow to dry before securing. Fasteners are not included. https://murrays.com/products/base-pad-universal-3-hole-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-8013.jpg?v=1676949566 BASE PAD UNIVERSAL 3-HOLE KIT This "potato chip" (2" OD) pad fits or can be modified to fit almost any main beam extrusion for use with a 3-hole swivel cleat. To modify, put sandpaper on beam and rub base pad to suit and/or fill gap with silicone sealant and allow to dry before securing. https://murrays.com/products/batten-cap-leech-adjustable-foam-3-4-each 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-4080-1.jpg?v=1676949566 3/4" ADJUSTABLE FOAM BATTEN CAP (EA) Batten Cap Leech Adjustable Foam 3/4" Murrays Part# 012-4080-1 Glue this adjustable 3/4" x 5/16" end cap onto any solid epoxy or foam batten. Batten may need to be modified slightly to ensure a good fit. Sold individually https://murrays.com/products/batten-cap-leech-1-foam-main-each 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003.jpg?v=1676949567 FOAM MAIN SAIL BATTEN CAP 1" LEECH CAP: 1" FOAM MAIN EACH Glue this end cap onto any solid epoxy or foam batten. Batten may need to be modified slightly to ensure a good fit. Measure your batten and select a Perfect Pocket cap size accordingly. TrenTec part number FB-10 https://murrays.com/products/batten-cap-leech-adjustable-main-prindle-each 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003_Prindle_batten_cap.jpg?v=1733790888 PRINDLE 16 MAIN ADJUSTABLE LEECH CAP Leech Cap Adjustable Main Prindle Murrays Part# 012-6003-1 No more knots at the trailing edge. These Perfect Pocket leech batten caps adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life.Tren Tec adjustable batten caps for Prindle catamaran mainsails. Leech caps are used on the trailing edge of the sail. Sold individually https://murrays.com/products/batten-cap-leech-adjustable-h16-jib-each 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-3004-1.jpg?v=1676949569 ADJUSTABLE LEECH JIB BATTEN CAP (EA) Batten Cap Leech Adjustable H16 Jib Each Murrays Part# 012-3004-1 No more knots at the trailing edge. Adjust Hobie® 16 jib sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual cap. Sold Individually https://murrays.com/products/batten-caps-leech-adjustable-foam-3-4-package-of-10 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-4080.jpg?v=1676949570 3/4" ADJUSTABLE FOAM LEECH CAPS (10) https://murrays.com/products/batten-cap-leech-h14-h16-h17-h18-main-each 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003_f2e63f94-3b59-4816-94dd-a9bdac333e70.jpg?v=1676949571 H-14/16/17/18 MAIN BATTEN LEECH CAP Batten Cap Leech H14/16/17/18 Main E Murrays Part# 012-3003-1 No more knots at the trailing edge. Adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual batten cap for Hobie 14, 16, 17 or 18 main sail. Mainsail batten cap for Saturn shape main sail battens used on Hobie, Prindle some Nacra sails. Trentec part number BC-HM Compare to Hobie 11323000 Sold individually  https://murrays.com/products/batten-caps-leech-adjustable-h14-h17-package-of-6 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003_b04b8506-517b-42e7-83dc-53adde6d9329.jpg?v=1676949573 H-14/17 ADJUSTABLE BATTEN LEECH CAPS (6) H14/17 Adjustable Batten Leech Caps Murrays Part# 012-2003 No more knots at the trailing edge. Adjust Hobie® 14 or Hobie® 17 sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes pre-cut line Hobie Part# 1521 Sold in packages of 6 https://murrays.com/products/batten-caps-leech-adjustable-foam-main-1-package-of-10 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003_-_10.jpg?v=1733856051 ADJUSTABLE MAIN BATTEN LEECH CAPS 1" (10) 1" FOAM MAIN SAIL BATTEN CAP SET OF 10 Murrays Part# 012-8003 Glue this end cap onto any solid epoxy or foam main sail batten. Batten may need to be modified slightly to ensure a good fit. Measure your batten and select a Perfect Pocket cap size accordingly. Leech caps are for the trailing edge of the sail. TrenTec part number FB-10 https://murrays.com/products/batten-caps-leech-adjustable-h16-jib-package-of-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-3004.jpg?v=1676949574 ADJUSTABLE JIB BATTEN CAPS (4) Batten Cap Leech Adjustable H16 Jib Murrays Part# 012-3004 No more knots at the trailing edge. Adjust Hobie® 16 jib sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual cap. Sold in packages of 4 https://murrays.com/products/batten-caps-leech-adjustable-h16-main-package-of-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003_f915ccf7-445d-460e-8ec2-820c25384636.jpg?v=1676949575 H-16 ADJUSTABLE BATTEN LEECH CAPS (8) Adjustable Leech Batten Caps H16 Murrays Part# 012-3003 No more knots at the trailing edge. Adjustable batten caps for Hobie® 16 enable sail shape adjustment in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes 8 batten caps and pre-cut line. https://murrays.com/products/batten-caps-leech-adjustable-p16-package-of-9 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003Prindle_batten_cap.jpg?v=1733791032 PRINDLE 16 ADJUSTABLE BATTEN LEECH CAPS (9) Batten Caps Leech Adjustable Prindle 16 Murrays Part#012-6003 No more knots at the trailing edge. These leech batten caps adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes 9 batten caps for Prindle 16 and pre-cut line. Tren Tec adjustable batten caps for Prindle catamaran mainsails. Leech caps are used on the trailing edge of the sail. Sold in packages of 9, includes batten tie lines. https://murrays.com/products/batten-caps-leech-adjustable-h18-main-package-of-10 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003_a50c803d-7a75-4a77-9f82-2491c80ef7a2.jpg?v=1676949577 H-18 MAIN ADJUSTABLE BATTEN LEECH CAPS (10) H18 Main Adjustable Batten Leech Caps Murrays Part# 012-4003 No more knots at the trailing edge. Adjust Hobie® 18 main sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Hobie Part# 1523 Sold in packages of 10 https://murrays.com/products/batten-caps-leech-adjustable-p18-package-of-10 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-8003_55299a03-7207-4671-9274-bd18d5bc226f.jpg?v=1676949578 PRINDLE 18 ADJUSTABLE BATTEN LEECH CAPS Batten Caps Leech Adjustable P18 Murrays Part# 012-7003 No more knots at the trailing edge. Adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes pre-cut line. Sold in a package of 10 https://murrays.com/products/batten-caps-luff-angled-h14-package-of-6 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-2006.jpg?v=1676949580 H-14 ANGLED LUFF CAPS (6) H14 Angled Luff Caps Murrays Part# 012-2006 No more battens poking through next to the mast. Tren Tec angled luff caps for Hobie® 14 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Part# 1561 Sold in packages of 6 https://murrays.com/products/batten-caps-luff-angled-h16-main-package-of-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie_16_Angeled_luff_caps_1562.png?v=1776445297 H-16 ANGLED LUFF CAPS (8) Tren Tec Hobie 16 main sail luff batten caps prevent batten splitting and align batten to the angle of the sail. Glue cap to the forward end of the batten. Increases the life of the sail Prevents battens ripping the sail pockets Prevents battens from splitting Aligns battens to the angle of the sail Sold in packages of 8 Hobie Part# 1562 https://murrays.com/products/batten-caps-luff-angled-h18-package-of-10 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-2006_48bc1c1c-d2f9-4854-a6e7-8042f3380142.jpg?v=1676949581 H-18 ANGLED LUFF BATTEN CAPS H18 Angled Luff Batten Caps Murrays Part# 012-4005 No more battens poking through next to the mast. Ten angled Tren Tec luff caps for Hobie® 18 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Part# 1563 Sold in packages of 10 https://murrays.com/products/batten-caps-luff-angled-p16-package-of-9 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-2006_Prindle_16_Angled_Batten_Luff_Caps.jpg?v=1745859399 PRINDLE 16 ANGLED BATTEN LUFF CAPS (9) Prindle 16 Angled Batten Luff Caps Murrays Part# 012-6005 No more battens poking through next to the mast. Angled luff caps prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Sold in packages of 9 https://murrays.com/products/batten-caps-luff-h16-jib-package-of-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-3006.jpg?v=1676949584 H-16 JIB BATTEN LUFF CAPS (4) Batten Caps Luff H16 Jib (Pack of 4) Hobie Part# 012-3006 No more battens poking through next to the mast. This Tren Tec item includes four Hobie® 16 jib luff batten caps to prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Cat® uses #1566 for this item https://murrays.com/products/batten-tensioner 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1528.jpg?v=1676949585 BATTEN TENSIONER Batten Tensioner Murrays Part# 007-1528 This great idea from Europe gives precision adjustment when tensioning battens. The screw thread adjuster allows as fine an adjustment as you want. It clips to the sail at the batten tie strip grommets and pushes against the end of the batten. No batten cap is required. Hobie Cat® Part# 1528 https://murrays.com/products/big-cat-catamaran-righting-system 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-8293-2-400x400.jpg?v=1738347699 BIG CAT RIGHTING SYSTEM https://murrays.com/products/big-foot-6-wheel-heavy-duty-pwc-cart 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/13-1506-1-1-scaled.jpg?v=1676949588 BIG FOOT 6-WHEEL HD PWC CART W/COUPLER 2" https://murrays.com/products/black-max-wind-indicator 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/08-1295.jpg?v=1676949589 BLACK MAX WIND INDICATOR Black Max Wind Indicator Murrays Part# 008-1295 Durable windvane made for the abuses of dinghy sailing. Dinghy sailing is more demanding of both sailors and equipment—both can get a beating on the water. The Black Max Dinghy Windvane was built stand by you take the abuse. This compact windvane mounts to the mast or boom to provide constant feedback of apparent wind angle. The needle bearing of the high-impact plastic vane optimizes sensitivity in light air. https://murrays.com/products/bolt-allen-head-1-4-20-x-2-5-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2222.jpg?v=1676949590 BOLT ALLEN HEAD 1/4-20 X 2.5" SS Bolt Allen Head 1/4-20 X 2.5 (Stainless Steel) Murrays Part# 19-2222 Stainless steel Allen head bolt is used on Prindle tiller connector. Measures 1/4-20 x 2.5" https://murrays.com/products/bolt-hex-head-1-2-13-x-3-75-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2240.jpg?v=1676949593 BOLT HEX HEAD 1/2-13 X 3.75" (SS) Bolt Hex Head 1/2-13 X 3.75 (Stainless Steel) Murrays Part# 19-2240 Stainless steel hex head bolt for older Hobie® 16 pylon. Compare to Hobie® Part#50-8040731 https://murrays.com/products/bolt-hex-head-1-4-20-x-2-25-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2221.jpg?v=1676949593 BOLT HEX HEAD 1/4-20 X 2.25" (SS) Bolt Hex Head 1/4-20 X 2.25 Stainless Steel Murrays Part# 19-2221 Prindle 16/18 and Hobie® rudder bolt. Stainless steel 1/4-20 x 2-1/4" hex head bolt. https://murrays.com/products/bolt-hex-head-1-4-20-x-2-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2220.jpg?v=1676949594 BOLT HEX HEAD 1/4-20 X 2" (SS) Bolt Hex Head 1/4-20 X 2 (Stainless Steel) Murrays Part# 19-2220 Stainless steel hex head bolt measures 1/4-20 x 2". Substitute for discontinued item #56-F124 and is a slightly longer replacement for #56-F191. Similar to Prindle F120 https://murrays.com/products/bolt-hex-head-1-4-20-x-3-5-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2224.jpg?v=1676949595 BOLT 1/4-20 X 3.5" (SS) Bolt Hex Head 1/4-20 X 3.5" Stainless Steel Murrays Part# 19-2224 Stainless steel hex head bolt measures 1/4-20 x 3-1/2" Pylon Bolt for newer H16 Hobie Part# 8040361 https://murrays.com/products/bolt-hex-head-1-4-20-x-5-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2226.jpg?v=1676949597 BOLT HEX HEAD 1/4-20 X 5" (SS) Bolt Hex Head 1/4-20 X 5" (Stainless Steel) Murrays Part# 19-2226 Stainless steel 1/4-20 x 5" hex head bolt is used for Hobie® 18 mast rotation arm. Use #19-2516 nut. Equivalent to Hobie® Part# 8040111 https://murrays.com/products/bolt-hex-head-1-4-20-x-4-5-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2227.jpg?v=1676949598 BOLT HEX HEAD 1/4-20 X 4.5" (SS) Bolt Hex Head 1/4-20 X 4.5" (Stainless Steel) Murrays Part# 19-2227 Stainless steel mast bolt for Hobie® 20 is 1/4-20 x 4-1/2" long. Also fits Hobie® 17/20 and Nacra mast rotation arm (#25-3040) https://murrays.com/products/bolt-hex-head-3-8-16-x-2-5-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2239.jpg?v=1676949599 BOLT HEX HEAD 3/8-16 X 2.5" (SS) Bolt Hex Head 3/8-16 X 2.5" (Stainless Steel) Murrays Part# 19-2239 Stainless hex head bolt is used on Nacra and Prindle crossbar. https://murrays.com/products/bolt-hex-head-5-16-18-x-2-25-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2230.jpg?v=1676949601 BOLT HEX HEAD 5/16-18 X 2.25" SS Bolt Hex Head 5/16-18 X 2.25 (Stainless Steel) Murrays Part#19-2230 Stainless steel hex head bolt measures 5/16-18 x 2-1/4" https://murrays.com/products/bolt-hex-head-5-16-18-x-1-5-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2229.jpg?v=1676949602 BOLT HEX HEAD 5/16-18 X 1.5" Bolt Hex Head 5/16-18 X 1.5" Murrays Part# 19-2229 Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting. Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164 https://murrays.com/products/bolt-hex-head-5-16-18-x-3-75-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2235.jpg?v=1676949603 BOLT HEX HEAD 5/16-18 X 3.75" SS Bolt Hex Head 5/16-18 X 3.75 Stainless Steel Murrays Part# 19-2235 Stainless steel 5/16-18 x 3-3/4" hex head bolt Equivalent to Hobie Cat® item #8040381 https://murrays.com/products/bolt-hex-head-5-16-18-x-2-50-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2231.jpg?v=1676949603 BOLT HEX HEAD 5/16-18 X 2.50" SS Bolt Hex Head 5/16-18 X 2.50" Stainless Steel Murrays Part# 19-2231 Stainless steel rudder bolt for all Hobie® Cats measures 5/16-18 x 2.50".  Used on Hobie Getaway Bow Spreader - Bow Tang Bolt. Rudder bolt for both the upper and lower rudder casting. Compare to Hobie Cat® Part# 8040341 https://murrays.com/products/bolt-hex-head-5-16-18-x-4-50-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2237.jpg?v=1676949605 BOLT HEX HEAD 5/16-18 X 4.50" SS Bolt Hex Head 5/16-18 X 4.50" (Stainless Steel) Murrays Part# 19-2237 Stainless steel hex head bolt for Prindle mast rotation control arm. Use #19-2520 nylock nut. This bolt is a replacement for item #56-F110 Comparable to Hobie Part# 8040211 https://murrays.com/products/bolt-hex-head-8mm-x-1-1-8-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2210.jpg?v=1676949606 BOLT HEX HEAD 8mm 1-1/8" (SS) Bolt Hex Head 8mmX1-1/8 Stainless Steel Murrays Part#19-2210 Stainless steel hex head bolt measures 8mm x 1-1/8" https://murrays.com/products/bolt-hex-head-5-16-18-x-3-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2232.jpg?v=1676949607 BOLT HEX HEAD 5/16-18 X 3" (SS) Bolt Hex Head 5/16-18 X 3" (Stainless Steel) Murrays Part# 19-2232 Stainless steel hex head bolt measures 5/16-18 x 3" https://murrays.com/products/bolt-hex-head-8mm-x-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2208.jpg?v=1676949607 BOLT HEX HEAD 8mm X 16" Bolt Hex Head 8mm x 16" Murrays Part# 19-2208 Stainless steel hex head bolt measures 8mm x 16" https://murrays.com/products/bolt-hex-head-8mm-x-25mm 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2209.jpg?v=1676949609 BOLT HEX HEAD 8mm X 25mm Bolt Hex Head 8mm x 25mm Murrays Part# 19-2209 Stainless steel hex head bolt measures 8mm x 25mm https://murrays.com/products/bristle-brush-1 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/bullseye-fairlead 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-7851.jpg?v=1676949611 BULLSEYE FAIRLEAD Bullseye Fairlead Murrays Part# 22-7851 Bulls-eye fairlead has a 7/16" line capacity. Mount with two #10-32 x 1" screws (#19-2915). https://murrays.com/products/bullseye-fairlead-with-ferrule 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-0323.jpg?v=1676949613 RONSTAN BULLSEYE FAIRLEAD WITH FERRULE Ronstan Bullseye with Ferrule Murrays Part# 25-0323 Stainless ferrule eliminates with nylon housing, the stainless center coating prevents grooving and wear from uses. Allows for up to 7/16" line capacity. Mounting: Two screws ordered separately (#10-32x1") part number 19-2915. https://murrays.com/products/cant-miss-rings-pair-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Can_t_miss_Trapeze_Handle_001-0124_2004BLK.png?v=1758820973 CAN'T MISS RINGS Murrays Can't miss rings, trapeze harness ring, J&H Handles, Hobie part number 2004BLK, dog bone, trap handle, Hobie trapeze handle, Nacra, prindle, g-Cat, Sol Cat, Dart catamaran https://murrays.com/products/carbine-hook-plastic 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0127_2.jpg?v=1676949615 PLASTIC CARBINE HOOK Carbine Hook (Plastic) A quick connection of trapeze shock cord to height control adjustment. 2-1/4" long. Compare to Hobie Cat® #2101. https://murrays.com/products/carabiner-hook-1-4-x-2-3-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-4156.jpg?v=1676949616 CARABINER HOOK 1/4" x 2-3/8" Carabiner Hook1/4" x 2-3/8" Murrays Part# 22-4156 Carabiner hook is constructed of 316 stainless steel. Specifications: 1/4" diameter, 2-3/8" length, weighs .08 lb. with 700 lb. breaking strength. https://murrays.com/products/carbon-key-hole-buckle-only 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0311.jpg?v=1676949618 CARBON KEY HOLE BUCKLE Carbon Key Hole Buckle Murrays Part# 001-0311 The safety-minded Carbon Key-Hole buckle system offers many advantages over the traditional hook design. Its low profile design is less likely to get hooked unintentionally and the system will stay hooked until purposefully removed. A low profile means much easier reboarding and less likelihood of scratching gel coat, point loading or damaging a hull. Ball-end trapeze rings are lighter and less dangerous than stainless dogbones or trapeze rings. https://murrays.com/products/cant-hurt-trapeze-rings 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0123-1.jpg?v=1676949620 CAN'T HURT TRAP RINGS (PR) Can't Hurt Trap Rings Murrays Part# 001-0123 Can't Hurt Trap Rings are a light and flexible alternative to "hard" stainless steel dogbones. Black high pressure nylon tubing covers 1/8" (1x19) stainless wire. Compare to Hobie Cat® #2003. Sold in pairs https://murrays.com/products/cat-bag-5 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1169_57b0d481-62e4-4fa9-82df-da79076f9262.jpg?v=1676949620 5" PORT CAT BAG Port Cat Bag 5" Murrays Part# 001-1178 The Cat Bag provides handy storage inside a deck port! Designed to hang inside 5" access port (#01-4210 or #01-4210BK) on a molded shoulder. Details: 12" deep Comes in one color: red Metal collar - gap in ring for easy installation Cinch bag style https://murrays.com/products/cat-bag-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1169_fc2f6167-1192-4433-a276-d657f9711a8d.jpg?v=1676949620 4" PORT CAT BAG Cat Bag 4" Murrays Part# 001-1169 The Cat Bag provides handy storage inside a deck port! The sturdy nylon bag with plastic collars hangs inside 4" access port on a molded shoulder. 12" deep. Hobie Cat® uses #5402 for this item. https://murrays.com/products/cat-righter-uphaul-cam-cleat-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3273.jpg?v=1676949622 CAT RIGHTER UPHAUL: CAM-CLEAT 4:1 Cat Righter Uphaul: Cam-Clt 4:1 Murrays Part# 001-3273 This is the 4:1 block and tackle system only from Murrays' popular Cat Righting Big Bag System (#01-3280). Use with a righting bag to aid in righting a capsized catamaran. https://murrays.com/products/cat-bag-righting-big-bag-system 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3280-2013.jpg?v=1676949624 CAT BAG RIGHTING BIG BAG SYSTEM Big Bag Cat Righting System Murrays Part# 001-3280 Our Cat Righting Big Bag System is a must for solo or lightweight crews to feel confident being able to right a capsized catamaran. It is powerful enough to right bigger cats without loosening shrouds. and is easy to install with no boat modification required. The bag attaches with hook and loop straps under the tramp for easy use and storage. Class legal for racing! Theoretical maximum capacity of the 18" x 32" bag is 250 lbs. The included 4:1 block and https://murrays.com/products/cat-shackle-tool 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0006-2011.jpg?v=1676949624 CAT SHACKLE TOOL Cat Shackle Tool Murrays Part# 001-0006 This stamped stainless steel tool is a screwdriver, bottle opener, shackle tool and 3/8" and 5/16" wrench. The shackle key also aids in getting pins out of shackles and loosening drain plugs. Compare to Hobie Cat® Part# 83101 https://murrays.com/products/cat-trax-axle-hose-cover 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/13-1401-6.jpg?v=1676949626 CAT TRAX AXLE HOSE COVER (EA) Cat Trax Axle Hose Cover Murrays Part# 13-1401-6 Replacement hose cover for Cat Trax axle helps cushion your boat's hulls. Item sold individually https://murrays.com/products/cat-trax-hull-cradles-wide-for-inter-17-i-18-i-20-infusion-n15-pair 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/cat-trax-wide-cradle.jpg?v=1676949628 CAT TRAX WIDE HULL CRADLES https://murrays.com/products/cat-trax-molded-end-cap 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Cat-trax-end-cap.jpg?v=1676949628 CAT TRAX MOLDED END CAP (EA) Cat Trax Molded End Cap Murrays Part# 13-1403 Replacement molded end cap keeps the boat from sliding off the end of the Cat Trax axle. Carpet protects your boat. Sold individually Hobie Cat® Part# 1620 https://murrays.com/products/cat-trax-t-handle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/cat-trax-t-handle.jpg?v=1676949630 CAT TRAX T-HANDLE-HARDWARE INCLUDED https://murrays.com/products/cat-trax-cradles-pair 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Cat-trax-cradles.webp?v=1676949631 CAT TRAX CRADLES (PAIR) https://murrays.com/products/cat-trax-tire-rim 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/tire-and-rim.jpg?v=1676949632 CAT TRAX TIRE & RIM ASSEMBLY (EACH) Cat Trax Tire Rim Assembly Murrays Part# 13-1401-1 Replacement Cat Trax balloon tire and rim assembly. Typically Ships from the manufacturer, which adds to the lead time. Hobie Cat® Part# 1635 https://murrays.com/products/cat-trax-tire-tube 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/cat-trax-tire-tube.jpg?v=1676949632 CAT TRAX TIRE TUBE Cat Trax Tire Tubes Murrays Part# 13-1401-9 Add an inner tube to the tire(s) of your Cat Trax beach dolly to prevent air leaks or squeeze some life out of your old tires. Sold individually https://murrays.com/products/catamaran-footstrap-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2015.jpg?v=1676949635 DAKINE CATAMARAN FOOTSTRAP KIT (PR) he comfortable, 6" adjustable foot straps feature 7mm neoprene padding to comfortably accommodate bare feet or sailing shoes. Their pre-formed arch eliminates collapsing and the exterior hook and loop closure system allows for quick and easy adjustment. Drilling instructions and self-tapping screws are included. https://murrays.com/products/catamaran-universal-righting-system 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-8292-2-400x400.jpg?v=1738347380 UNIVERSAL RIGHTING SYSTEM Catamaran Universal Righting System Murrays Part# 001-8292 The Universal Righting System is simple and effective with large, 1/2" diameter, black polypropylene righting line that is light and easy to access and grip, even when wet. The line self-returns under the tramp after use. There are no knots to pre-tie or untie. The shock cord and pulleys provided hold line snug and are external, so they are easy to adjust and service. Fits 8' to 8'6" wide catamarans; ideal for boats with flush-deck trampoline. https://murrays.com/products/channel-insert-10-32-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/03-0190.jpg?v=1676949638 CHANNEL INSERT M4 - .7mm with SCREW https://murrays.com/products/chinook-base-cup-with-double-button 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/03-0281.jpg?v=1676949641 CHINOOK BASE CUP WITH DOUBLE BUTTON Chinook Base Cup with Double Button Murrays Part# 003-0281 American standard heavy duty plastic base cup with 3/8" double push button has brass insert and cover which prevents sand from jamming parts. https://murrays.com/products/cat-trax-tire-only-21x12-0-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/cat-trax-tire-only.jpg?v=1676949648 CAT TRAX TIRE ONLY 21X12 Cat Trax Tire Only 21x12 Murrays Part# 13-1401-3 Replacement 21″x12.0-8 tire only (without rim) for Cat Trax beach wheels. https://murrays.com/products/chinook-mechanical-universal-joint 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-9525.jpg?v=1676949643 CHINOOK MECHANICAL UNIVERSAL JOINT Chinook Mechanical Universal Joint Murrays Part# 001-9525 Chinook mechanical replacement universal joint for mast base has 8mm female threads on both ends. https://murrays.com/products/cinch-ring 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/cinch-ring_1_5159053c-a241-4ebc-83d7-0ec0aa22b753.jpg?v=1754416933 CINCH RINGS - Stainless Steel SOLD EACH https://murrays.com/products/clamcleat-boom-cleat-clam 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0244.jpg?v=1676949649 CLAMCLEAT BOOM CLEAT WITH CLEAT AND CLAM https://murrays.com/products/clamcleat-aluminum 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0702.png?v=1676949651 CLAMCLEAT (ALUMINUM) Clamcleat (Aluminum) Murrays Part# 27-0702 Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 1/8"-1/4".  2 5/8" hole spacing. This cleat is a substitution for Hobie Part# 61070000 https://murrays.com/products/clamcleat-handle-for-cl253-trapeze-cleat 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0834.jpg?v=1676949651 CLAMCLEAT HANDLE FOR TRAPEZE CLEAT Clamcleat Handle For Trapeze Cleat Murrays Part# 27-0834 The 27-0834 handle is designed for a perfect fit on the Clamcleat® silver CL253 (#27-0253) and CL253AN hard-anodized (#27-0253A) trapeze cleats. Developed in conjunction with the racing specialists at Shock Sailing, the handle is light weight, the perfect size and very comfortable to use. https://murrays.com/products/clamcleat-midi-nylon 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0209.jpg?v=1676949653 CLAMCLEAT MIDI (NYLON) Clamcleat Midi (Nylon) Murrays Part# 27-0209 Replace old, worn-out outhaul and downhaul Clamcleats®. Nylon cleats have less wear resistance than aluminum, but are less expensive. Easy to mount. Line capacity is 3/16"-5/16". 2 1/8" hole spacing. https://murrays.com/products/clamcleat-auto-release-racing-mini-cl257 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0257.jpg?v=1676949656 CLAMCLEAT AUTO-RELEASE RACING MINI CLEAT Clamcleat Auto-Release Racing Mini Murrays Part# 27-0257 The Clamcleat® Auto-Release cleat provides the neatest and best solution to the problem of how to lock-down a rudder blade, yet allow it to flip-up if it hits the bottom or a solid obstacle in the water. The cleat holds ropes securely, but will release them immediately when the cleat is overloaded. Once tripped, it can be easily reset in seconds by just pushing the cleat back down into its base. https://murrays.com/products/clamcleat-kite-trapeze-hard-anodized 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0253.jpg?v=1676949655 CLAMCLEAT KITE & TRAPEZE HARD ANODIZED Clamcleat Kite Trapeze Hard Anodized Murrays part# 27-0253A This Clamcleat® aluminum rope cleat has a black hard-anodized coating that wears better than non-anodized when used with sandy line. Bottom roller. Rope size: 3/16" - 5/16" (4-8mm). Length: 3-1/2". Clamcleat version of a Ronstan RF5121 https://murrays.com/products/clamcleat-powergrip-i 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0261.jpg?v=1676949657 CLAMCLEAT POWERGRIP I Clamcleat PowerGrip I Murrays Part# 27-0261 The 27-0261 Clamcleat® Power Grip 1 is for single-handed use. It allows you to pull twice the load compared to using your bare hand and is equally suitable for right- or left-handed use. Line pulls from center of tool. The anodized aluminum tool features two sets of grip cleats to grip 1/8"-1/4" diameter lines. Tool length is 3-3/4" long. Hobie Cat® uses item Part# 2070 for the Power Grip I. https://murrays.com/products/clamcleat-powergrip-ii 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0262.jpg?v=1676949657 CLAMCLEAT POWERGRIP II Clamcleat PowerGrip II Murrays Part# 27-0262 The Clamcleat® CL262 Power Grip 2 is for two-handed use where even more pulling power and control are required. It is light, strong and convenient to carry in your pocket. The anodized aluminum tool grips 3/32" to 1/4" diameter lines. https://murrays.com/products/clamcleat-racing-midi-aluminum 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0254.jpg?v=1676949660 CLAMCLEAT RACING MIDI ALUMINUM Clamcleat Racing Midi Aluminum Murrays Part# 27-0254 Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 5/32"-5/16". 2 1/8" hole spacing. https://murrays.com/products/clamcleat-leech-line-cleat 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/IMG_2203.jpg?v=1676949661 CLAMCLEAT LEECH LINE CLEAT Clamcleat Leech Line Cleat Murrays Part# 27-0212 Jib halyard tensioning cleat for zippered luff jibs. The low-profile, white nylon Clamcleat® can be sewn or riveted onto sails and technical fabrics. It can be mounted in two positions on the sail. The tooth design allows a quick, positive lock that is easy to release. It is an ideal cleat for adjusting leech lines. Use a backplate when riveting a cleat onto fabric, as it will prevent the rivet pulling through. Includes: backing plate and 2x flare rivet https://murrays.com/products/clamcleat-racing-mini 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-1222.jpg?v=1676949662 CLAMCLEAT RACING MINI Clamcleat Racing Mini Murrays Part# 27-1222 The CL222 Racing Mini aluminum Clamcleat® is small, neat and lightweight and can be fixed to horizontal or vertical surfaces. It is a very useful cleat for small dinghies, and is also used in kiteboarding on bars and for adjusting the 5th line on kites. https://murrays.com/products/clamcleat-trapeze-vang-cleat 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0253_7c10ceaf-a847-45ac-89fe-b99be1ac2647.jpg?v=1676949662 CLAMCLEAT TRAP & VANG CLEAT Clamcleat Trapeze & Vang Cleat Murrays Part# 27-0253 The Clamcleat® trapeze and vang cleat allows for 2:1 trapeze adjustment while hooked up. Line rolls easily on large base roller. 1/4" line capacity. Each. Clamcleat version of a Ronstan Part# RF5121 https://murrays.com/products/clevis-pin-1-4-x-1-1-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-9803.jpg?v=1676949666 CLEVIS PIN 1/4 X 1-1/8" Clevis Pin 1/4 X 1-1/8 Murrays Part# 22-9803 Stainless steel clevis pin measures 1/4" diameter x 1-1/8" grip length (shoulder to the split ring hole). Compare to Hobie Part 8020420 and 8020410 https://murrays.com/products/clamcleat-with-top-roller-aluminum 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0236.jpg?v=1676949667 CLAMCLEAT WITH TOP ROLLER (ALUMINUM) Clamcleat with Top Roller (Aluminum) Murrays Part# 27-0236 Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 1/8"-1/4". https://murrays.com/products/clevis-pin-1-4-x-1-3-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9809.jpg?v=1734545167 CLEVIS PIN 1/4 X 1-3/4" Clevis Pin 1/4 x 1-3/4" Murrays Part# 22-9809 Stainless steel clevis pin measures 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole) https://murrays.com/products/clevis-pin-1-4-x-1-3-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/8020431_Hobie_clevis_pin_.25_x_1.375.jpg?v=1747411371 CLEVIS PIN 1/4 X 1-3/8" Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole). Uses: This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles. Hobie 18 main traveler car  Prindle Part# 6004  Comparable to Hobie Cat® Part# 8020431 https://murrays.com/products/clevis-pin-3-16-x-1-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-9801.jpg?v=1676949672 CLEVIS PIN 3/16 x 1/2" 3/16 X 1/2" Clevis Pin Murrays Part# 22-9801 Stainless steel clevis pin measures 3/16" diameter x 1/2" grip length (shoulder to the split ring hole). Prindle / Nacra Part# 9412 Compare to Hobie Cat® Part# 8020041 https://murrays.com/products/clevis-pin-1-4-x-5-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-9802.jpg?v=1676949672 CLEVIS PIN 1/4 X 5/8" Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380. https://murrays.com/products/clevis-pin-3-16-x-1-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/download_092e7dd8-d0de-4d7a-8f49-03bf1cec772b.jpg?v=1739294741 CLEVIS PIN 3/16 X 1-1/4 3/16 X 1-1/4" Clevis Pin Murrays Part# 22-9807 Stainless steel clevis pin. Measurement is 3/16" diameter x 1-1/4" grip length (shoulder to the split ring hole). Can replace Hobie Part# 8020340 Hobie Wave Mast Head Sheave Pin https://murrays.com/products/clevis-pin-3-16-x-7-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/8020061z103.jpg?v=1725653692 CLEVIS PIN 3/16 X 7/8" 3/16 X 7/8" Clevis Pin Murrays Part# 22-9806 3/16 x 7/8 Clevis Pin.  H16 gooseneck shackle clevis pin. Hobie Part# 8020061 https://murrays.com/products/clevis-pin-3-16-x-5-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9805_Clevis_Pin_3_16_X_5_8_Murrays_Part_22-9805_Stainless_steel_clevis_pin._Measurement_is_3_16_diameter_x_5_8_grip_length.jpg?v=1758319003 CLEVIS PIN 3/16 X 5/8" Clevis Pin 3/16 X 5/8" Murrays Part# 22-9805 Stainless steel clevis pin. Measurement is 3/16" diameter x 5/8" grip length (shoulder to the split ring hole). Hobie Cat Part number 8020041 https://murrays.com/products/clevis-pin-headless-3-16-x-1-1-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9811.jpg?v=1723565358 HEADLESS CLEVIS PIN 3/16 X 1-1/2" Clevis Pin Headless 3/16 X 1-1/2 Murrays Part# 22-9811 Stainless steel mast step hinge pin for Hobie® 16 has a hole on each end. Measures 3/16" diameter by 1-1/2" long. Part of the Hobie mast step link kit 21380001 https://murrays.com/products/clevis-pin-headless-1-4-x-3-3-8-hobie-18-mast-hinge-pin 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9815-2.jpg?v=1712675912 HEADLESS CLEVIS PIN 1/4 X 3-3/8" Hobie 18 mast step hinge pin, has a hole on one end only. The headless clevis pin measures 1/4″ diameter by 3-3/8″ grip length Hobie Part # 8020501 https://murrays.com/products/clew-kit-5-hole-hobie-16-jib 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1012_2.jpg?v=1676949682 H-16 5 HOLE JIB CLEW KIT Clew Kit 5-Hole (H16 Jib) Murrays Part# 001-1012 Clew kit for Hobie® 16 jib includes one pair of anodized aluminum plates with rivets to be set with a hammer. Each plate has five holes and measures 8" maximum length by 1-1/2" wide. Replacement rivets are available separately (#19-5006). This product replaces discontinued item #50-22240000. https://murrays.com/products/contoured-spacer-plastic 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-0061.jpg?v=1745534833 PLASTIC CONTOURED SPACER https://murrays.com/products/cotter-pin-3-32-x-3-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1015.png?v=1676949684 COTTER PIN 3/32 X 3/4" SS Cotter Pin 3/32 X 3/4 Murrays Part# 19-1015 Cotter pins are used on all Hobie, Nacra and Prindle rudder pins. They are used to secure the rudder pins. Compare to Hobie Cat® #8060111. Stainless steel cotter pin measures 3/32" x 3/4". https://murrays.com/products/cotter-pin-for-cat-trax 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/IMG_1182-300x300.jpg?v=1704983777 CAT TRAX COTTER PIN STAINLESS STEEL Cat Trax Cotter Pin Stainless Steel Murrays Part# 13-1401-8 Replacement cotter pin for Cat Trax beach wheels. https://murrays.com/products/d-ring-2-id-x-25 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3904.jpg?v=1676949687 D RING SS 1/4 X 2" D Ring 2" ID x .25" Murrays Part# 25-3904 Stainless "D" ring measures 1/4" x 2" outside diameter. https://murrays.com/products/dacron-insignia-cloth-black-per-yard 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/85540_psp_dacron_insignia_tape_black_75mmx1.5m.webp?v=1739469410 DACRON INSIGNIA CLOTH - BLACK https://murrays.com/products/dacron-sail-tape-white-3oz 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-3430.jpg?v=1676949688 DACRON 3OZ MAINSAIL TAPE-WHITE Dacron 3oz Sail Tape-White Murrays Part# 010-3430 Quickly mend tears in Dacron sails, covers, rain gear and seats. The heavy-duty, 3-oz. Dacron sailcloth makes long-lasting emergency repairs or provides effective reinforcement for worn areas. Features quick marine adhesive backing; can be stitched for permanent repair. Our white Dacron sail repair tape is 3" x 15'. https://murrays.com/products/dart-18-forestay-1-8-bare 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Bare_Bridle.jpg?v=1729613871 DART-18 FORESTAY 1/8" BARE DART-18 FORESTAY 1/8 BARE https://murrays.com/products/deck-box-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/03-3020.jpg?v=1676949695 DECK BOX 8" Deck Box 8" Murrays Part# 003-3020 8" fiber-filled, molded plastic deck box. Windsurfing mast track deck insert. https://murrays.com/products/digital-8-sail-number-12-black-10-pack 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-2108BK.jpg?v=1676949695 DIGITAL 8 SAIL NUMBER Digital 8 Sail Number Murrays Part# 010-2108BK Make any number and many letters from this peel-and-stick, black 12" black digital number 8. Small notches in the perimeter identify where to cut to make your desired digit. Details: Color: Black Size: 12" Quantity: Pack of 10 https://murrays.com/products/delrin-roller-bearing-set-20-for-cat-trax 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/cat-trax-bearing-set_55bbcdad-d937-45d1-9187-0bd1623d1a1b.jpg?v=1676949695 CAT TRAX DELRIN ROLLER BEARING SET (20) Cat Trax Delrin Roller Bearing Set Murrays Part# 13-1401-5 Set of 20 roller bushings for one Cat Trax wheel. Tiger Trax require 2 sets per wheel. Sold in set of 20 https://murrays.com/products/clevis-pin-1-4-x-1-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-9808.jpg?v=1676949709 CLEVIS PIN 1/4 X 1/2" Clevis Pin 1/4 X 1/2 Murrays Part# 22-9808 Stainless steel clevis pin. Measurement is 1/4" diameter x 1/2" grip length (shoulder to the split ring hole). Substitute for Hobie Cat® #8020371. https://murrays.com/products/dolphin-striker-eye-bolt-hobie-14 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-0106.jpg?v=1721231198 H-14 DOLPHIN STRIKER EYE BOLT Dolphin Striker Eye Bolt H14 Murrays PN 001-0106 This part is used as part of the Murrays H14 Dolphin Striker Kit. Replacement stainless steel post for #01-2083 dolphin striker for Hobie® 14. 19-2524 nylock nut is needed and not included with this part. https://murrays.com/products/dogbone-trapeze-ring 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/25-3610.png?v=1719430009 RONSTAN FIGURE 8 TRAPEZE RING (EACH) Ronstan Figure 8 Trapeze Ring Murrays Part# 25-3610 Original equipment for Hobie® trapeze systems, the figure 8 ring is 6" long with 1-1/2" rings. https://murrays.com/products/downhaul-cheek-block-for-hobie 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/25-3340.jpg?v=1734558563 HOBIE CHEEK BLOCK - 20710000 Hobie Halyard - Downhaul Cheek Block - 20710000 Murrays Part# 25-3340 The plastic sheave degrades and breaks on older Hobie® 16 downhaul cheek blocks and the entire block must be replaced. Also fits Sol Cat 18. Hole spacing 1/2" on center from side to side; 2-3/4" on center from end to end. To install, use four #19-5031 6-4 rivets and four #19-5020 sealing casings. Hobie Cat® Part# 20710000. https://murrays.com/products/downhaul-cleat-with-screws 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1020-1.jpg?v=1726088501 DOWNHAUL CLEAT WITH SCREWS Downhaul Cleat with Screws Murrays Part# 001-1020 The Downhaul Cleat Kit is for mounting in mast track (such as Hobie 16) and includes cleat, screws and channel inserts. Center-to-center hole spacing is 1-1/8". We have another kit for the halyard cleats on the side of the mast that includes rivets. https://murrays.com/products/downhaul-kit-6-1-h14-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/007-2089__94853.jpg?v=1736276356 H-14/16 6:1 DOWNHAUL KIT Downhaul Kit: 6:1 Hobie 14/16 Murrays Part# 007-2089 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo block. Includes Class-approved attachment for base of mast, all hardware and line. Use with gooseneck bearing kit (#12-2050). Hobie Part# 2089 https://murrays.com/products/downhaul-kit-6-1-with-harken-micro-euro 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/H-14-166to1DOWNHAULKIT.png?v=1736278694 H-14/16 6:1 DOWNHAUL KIT H14/16 6:1 Downhaul Kit Murrays Part# 007-2089-1 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo blocks.  Includes: Class-approved mast track attachment, all hardware and line. Recommended for use with gooseneck bearing kit (#012-2050) Hobie Part# 2089 https://murrays.com/products/downhaul-kit-hobie-14-hobie-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/DOWNHAUL_KIT_HOBIE_16.png?v=1736277783 H-14/16 DOWNHAUL KIT Downhaul Kit: H14/16 Murrays Part# 001-1028 This class legal 3:1 downhaul kit for Hobie® 14 or Hobie 16 includes Harken bullet block with becket and swivel, and 6 feet of 3/16" low-stretch, 8-strand line. This kit works with the stock downhaul horn cleat at the base of the mast. This is a fantastic economical and simple solution for the recreational sailor. Hobie part number 2081 https://murrays.com/products/drain-plug-for-hobie-nacra-and-prindle-catamarans 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10091000-Universal_Drain_Plug_for_most_Hobie_Nacra_and_Prindle_Catamarans_which_includes_a_gasket_and_fits_most_Hobie_Nacra_and_Prindle_catamarans..jpg?v=1732312265 HOBIE DRAIN PLUG WITH GASKET Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000 https://murrays.com/products/downhaul-scale 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/HOBIE_DOWNHAUL_SCALE_-_2082.png?v=1736277154 HOBIE DOWNHAUL SCALE HOBIE DOWNHAUL SCALE - 2082 Can you ever remember where the downhaul was set that day you “smoked” everyone. This handy stick on scale takes the guess work out of setting the downhaul. https://murrays.com/products/drain-plug-with-plastic-base 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0051.jpg?v=1676949714 DRAIN PLUG WITH PLASTIC BASE Drain Plug with Plastic Base Murrays Part# 001-0051 This lightweight and inexpensive drain plug features a molded recess in the molded nylon base that traps sealant (sold separately) in place, providing a more watertight seal. Gasket included. https://murrays.com/products/elongated-trapeze-ring-7-1-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/25-3620.jpg?v=1732050890 ELONGATED TRAPEZE RING ELONGATED TRAPEZE RING Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2" https://murrays.com/products/drain-plug-with-chromed-brass-housing 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/drainplug.jpg?v=1676949720 RONSTAN PLASTIC DRAIN PLUG WITH CHROME BRASS HOUSING, 15/16" HOLE Ronstan Plastic Drain Plug with Chrome Brass Housing, 15/16" Hole Murrays Part# 21-0737 This lightweight and inexpensive plug features a molded recess in the base that traps sealant (sold separately) in place, providing a more watertight seal. Nylon plug is UV-stabilized. Retaining legs keep drain plug from falling out of hole when unscrewed. Includes chromed brass housing (body) and gasket. https://murrays.com/products/ez-up-trapeze-kit-no-cut 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1120.jpg?v=1676949720 EZ-UP TRAP KIT: NO-CUT (PR) trapeze adjustment kit - 3102 - Murrays EZ Up Trap Kit https://murrays.com/products/fast-eye-snap-brass-2-1-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-136120.jpg?v=1676949721 FAST EYE SNAP BRASS 2-1/8" Fast Eye Snap Brass 2-1/8" Murrays Part# 27-136120 2-1/8" brass snap hook is convenient, but should not be used in critical, high-load situations. https://murrays.com/products/ez-up-trapeze-kit-harken 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-1121.jpg?v=1761934832 EZ-UP TRAPEZE KIT EZ-UP TRAP KIT: HARKEN - similar to Hobie part number 3102 https://murrays.com/products/fast-set-epoxy-2-part 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/00-0002-1.jpg?v=1676949724 FAST SET EPOXY Fast Set Epoxy Murrays Part# 000-0002-1 Some sailors like to "caramel-coat" the cork ball handle of the hiking stick with epoxy to make the cork ball last longer. https://murrays.com/products/fairlead-for-harken-roller-furling-drum 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-1066.jpg?v=1676949724 HARKEN FAIRLEAD FOR ROLLER FURLING DRUM Harken Fairlead for Roller Furling Drum Murrays Part# 25-1066 A fairlead directs line to coil evenly on a roller furling drum, reducing snagging and increasing drum line capacity. https://murrays.com/products/fiberglass-stain-remover 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-0790.jpg?v=1676949730 FIBERGLASS STAIN REMOVER Fiberglass Stain Remover Murrays Part# 007-0790 This stain-absorbing gel removes oil, rust and stains, road soil on your boat or other fiberglass surfaces. Simply apply, wait a few minutes, then wipe off. Fiberglass Stain Remover is non-abrasive and requires no sanding or compounding. It also removes rust stains from cloth. 16 oz. https://murrays.com/products/fiddle-block-with-swivel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/25-3901.jpg?v=1736268224 FIDDLE BLOCK WITH SWIVEL FIDDLE BLOCK W/SWIVEL Use this economical medium fiddle block with cleat and becket for 4:1 righting aids. 3/16 to 3/8" line capacity. https://murrays.com/products/fin-belt-by-murrays 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/11-1001-Fin-Belt.jpg?v=1676949732 FIN BELT BY MURRAYS Fin Belt By Murrays Murrays Part# 011-1001 Securing your fins at your waist gives you the edge during dynamic water conditions. The Murrays Fin Belt holds fins within reach. Just unclip the quick release buckle and go. Water rescue personnel find these fin belts invaluable for surf and swift water operations. The fully adjustable belt is also a handy place to carry your knife horizontally so that it doesn't get in the way, a feature favored by search and rescue personnel. https://murrays.com/products/fiddle-block-with-cleat-and-becket 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/fiddlewithbecket.jpg?v=1736272083 FIDDLE BLOCK WITH CLEAT & BECKET FIDDLE BLOCK W/CLEAT BECKET Use this economical medium fiddle block with swivel for boom vangs and righting aids. 3/16 to 3/8" line capacity. https://murrays.com/products/folding-anchor-3-5-lb 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/24-2311.jpg?v=1676949735 WEST MARINE FOLDING ANCHOR 3.5 LB Folding Anchor 3.5 LB Murrays Part# 24-2311 Collapsible anchor is constructed of corrosion-resistant galvanized iron and conveniently fits through a 4" port hole. Weighs 3.5 lb. https://murrays.com/products/folding-anchor-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-6051.jpg?v=1676949736 FOLDING ANCHOR KIT Folding Anchor Kit Murrays Part# 001-6051 The convenient 7"x17" zippered pouch holds a 3.5-lb. folding anchor with chain and 50 feet of polypropylene line. Clip the pouch in a convenient location or stow the kit in an access port. https://murrays.com/products/footstrap-inserts-with-screws 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-9518.jpg?v=1676949739 FOOTSTRAP INSERT WITH SCREWS (PR) Footstrap Inserts with Screws Murrays Part# 001-9518 Includes two footstrap inserts, four screws and four washers. Sold as a pair https://murrays.com/products/gel-coat-repair-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1601.jpg?v=1676949739 GEL COAT REPAIR KIT Gel Coat Repair Kit Murrays Part# 007-1601 Evercoat's handy Marine Match 'n Match Gel Coat Repair Kit permanently repairs nicks, gouges and scratches in fiberglass hulls and decks. Blends hundreds of color combinations and cures glass-hard in one hour. https://murrays.com/products/footstrap-insert-only 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-9514.jpg?v=1676949740 1" FOOTSTRAP INSERT (EA) Footstrap Insert 1" This 1" footstrap insert is the best choice for custom fiberglass or epoxy skinned boards. Use #10 screw (#19-3211) and washer (#19-4011). Also available as a kit (#01-9518) that includes pair of inserts with fasteners. Sold individually https://murrays.com/products/getaway-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-0915-22.jpg?v=1742494270 GETAWAY BRIDLE 5/32" BLACK WIRE Hobie Getaway Bridle 5/32" Black Wire Murrays Part# 002-0915-22 One black bridle for Hobie® Getaway is constructed to factory specifications. We recommend ordering two to ensure equal lengths. Compare to Hobie Part# 37822011 https://murrays.com/products/getaway-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS.jpg?v=1676949743 GETAWAY LOWER FORESTAY 5/32" BLACK WIRE Getaway Forestay 5/32" Black Wire Murrays Part# 002-0945-12 The Hobie Getaway forestay is made with 5/32" black vinyl coated type 316 stainless steel wire and fittings. This forestay is compatible with all generations of Hobie Getaways. Compare to Hobie Cat Part# 37810001 https://murrays.com/products/hobie-getaway-main-halyard-comptip 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-0973-60_HOBIE_GETAWAY_HALYARD.jpg?v=1771523969 GETAWAY MAIN HALYARD Getaway Main Halyard Murrays Part# 002-0973-60 The Murrays Hobie Getaway main halyard for is constructed to the current factory specs. It has a long rope section and a shorter wire section with a stopper and halyard shackle. The rope section is easy on the hands and prevents electrical current from traveling down the mast in the event of an electrical wire contact. Compare to Hobie part number 37651001 https://murrays.com/products/getaway-shroud-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0905-02.jpg?v=1676949747 GETAWAY SHROUD 5/32" BLACK WIRE Getaway Shroud 5/32" Black Wire Murrays Part# 002-0905-02 Single black shroud (sidestay) for Hobie® Getaway is constructed to factory specifications. Compare to Hobie Cat® Part# 37790001 https://murrays.com/products/getaway-trapeze-wires-black-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Black_Single_Trap_397d1627-4de2-41fb-80ee-0dde1cd6cc94.jpg?v=1722283153 GETAWAY TRAPEZE BLACK WIRE (2) Getaway Trapeze Wire (2 Handles) Murrays Part# 002-0953-02 The Murrays Getaway Trapeze is a set of 2 black or white coated trap wires with 2 handles for trapezing. Order shock cord, harness loops and adjustment kits separately. https://murrays.com/products/h14-h16-aluminum-rudder-pins-w-rudder-tite-bushings-pr 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-2283_Hobie_rudder_pins_with_bushings.jpg?v=1744840876 H-14/16 RUDDER PINS WITH BUSHINGS RUDDER PINS W/BUSHINGS H14/16 Aluminum rudder pins for a Hobie 14 and 16. Includes cotter pins and 4 rudder bushings. Hobie part numbers: 20880001 and 8062001 https://murrays.com/products/gudgeon-lower-h14-h16-h17-all-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3352.jpg?v=1676949750 H-14/16/17/18 LOWER GUDGEON H14/16/17/18 Gudgeon Lower Murrays Part# 25-3352 The latest, strongest rudder gudgeon design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14, 16 and 17, order separate upper and lower gudgeons. For all other Hobie® cats with new-style castings, post 1986, order 4 for a complete set . Replacement for Hobie Part# 50101401 https://murrays.com/products/h14-main-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/HOBIE_14_MAIN_HALYARD_W_SHACKLE_Main_halyard_with_shackle_for_Hobie_14_with_all-aluminum_mast_no_CompTip_is_constructed_to_factory_specifications._A_main_halyard_is_used_to_raise_the_main_sail._Compare_to_Hobie_Cat_10651001.jpg?v=1732140154 H-14 MAIN HALYARD WITH SHACKLE HOBIE 14 MAIN HALYARD W/SHACKLE Main halyard with shackle for Hobie 14 with all-aluminum mast (no CompTip) is constructed to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie Cat® #10651001 https://murrays.com/products/h14-main-halyard-comptip 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/HOBIE_14_MAIN_HALYARD.jpg?v=1732140094 H-14 MAIN HALYARD COMPTIP HOBIE 14 MAIN HALYARD COMPTIP This main halyard is used to raise the main sail on a Hobie® 14 with CompTip on its mast. Constructed to factory specifications. Compare to Hobie Cat® #10657001. https://murrays.com/products/h16-aussie-pigtail-assembly 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-3300-00.jpg?v=1676949758 H-16 AUSSIE PIGTAIL ASSY H16 Aussie Pigtail Assy Replacement 5/32" pigtail for Aussie jib halyard kit for Hobie® 16 (#01-3302) https://murrays.com/products/h14-turbo-upper-forestay-with-swivel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0134-0.jpg?v=1676949759 H-14 TURBO UPPER FORESTAY WITH SWIVEL H14 Turbo Upper Forestay with Swivel Murrays Part# 002-0134-01 Upper forestay with swivel for Hobie® 14 Turbo is constructed to factory specifications. Turbo refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tramp jib block wire. Compare to Hobie Cat® #10810010 https://murrays.com/products/h14-turbo-jib-block-wire 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0124-80.jpg?v=1676949760 H-14 TURBO JIB BLOCK BLACK WIRE H14 Turbo Jib Block Wire Murrays Part# 002-0124-80 Jib block wire for Hobie® 14 Turbo is constructed to factory specifications. Older under tramp version: requires grommets in the trampoline for jib blocks to connect to the Jib block wire thru the trampoline. And also requires a Hobie 14 shroud tang at the base of the shrouds to connect to. Turbo typically refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tram https://murrays.com/products/h16-jib-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0284-00.jpg?v=1676949764 H-16 JIB HALYARD WITH SHACKLE H16 Jib Halyard with Shackle Murrays Part# 002-0284-00 Jib halyard with shackle for Hobie 16 is constructed to factory specifications. This is for use on the classic style H16 jib halyard system with a metal sheave up near the mast tang that was standard in the 70s and 80s. The rope section of the jib halyard is 20' of 3/16ths line. Compare to Hobie Part# 20661001 https://murrays.com/products/hobie-16-main-halyard-comptip 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/hobie_16_main_halyard_20617001.jpg?v=1771523344 H-16 MAIN HALYARD COMPTIP The Hobie 16 main halyard comptip is used to raise the main sail on a Hobie 16 with a comptip on the mast. The main halyard comptip features a long rope section connected to a shorter wire section with a stopper and halyard shackle with a captured pin. The shackle connects to the head of the main sail and the stopper hooks into the main halyard hook and holds the sail up. Comptip masts are stock on all Hobie 16s since 1986. A comptip is the 10' fiberglass upper mast section of the mast 20617001 https://murrays.com/products/h16-main-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie_16_main_halyard_20651011.jpg?v=1758125278 H-16 MAIN HALYARD NON-COMPTIP Hobie 16 main halyard for all aluminum masts. Hobie part number 20651011 https://murrays.com/products/h16-jib-traveler-upgrade-kit 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/gooseneck-bearing-kit-h14-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-2050-1-rotated.jpg?v=1776182796 H-14/16 GOOSENECK BEARING KIT Hobie 16 gooseneck bearing kit. Tren Tec. Murrays Marine. Hobie Cat part number #1511 https://murrays.com/products/h16-upper-forestay-5-32-bare 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-0235-00.jpg?v=1721238703 H-16 UPPER FORESTAY 5/32" BARE WIRE H-16 UPPER FORESTAY 5/32 BARE Murrays PN 002-0235-00 Upper forestay for The Hobie® 16 is constructed of 7x19 - 5/32" bare wire to factory specifications. Compare to Hobie Cat® #20810011. This part is used as part of the classic halyard/ forestay configuration and it holds the stainless pulley that the jib halyard cable attaches to. This will also work to hold your Aussie halyard block assembly. https://murrays.com/products/h17-bridle-crossbar-assembly 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1350.jpg?v=1676949776 H-17 BRIDLE CROSSBAR ASSEMBLY https://murrays.com/products/h17-shroud-5-32-roller-swaged-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_a4ddcf50-937e-45df-8367-3aa363fb2edf.jpg?v=1676949779 H-17 SPORT SHROUD 5/32" WIRE ROLLER SWAGED H17 Shroud 5/32 Roller Swedge Murrays Part# 002-0305-12 This is our strongest Shroud for the Hobie 17.  If you have a Hobie 17 Sport or Hobie 17 Super kit or other setup that has a jib on the front, you need these. Heavy duty 5/32" single black shroud (sidestay) for Hobie 17 or Hobie 17 Sport is hydraulically swaged with a thimble and marine eye for a cleaner, stronger shroud. https://murrays.com/products/h17-sport-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS.jpg?v=1676949780 H-17 SPORT BRIDLE 5/32" BLACK WIRE H-17 SPORT BRIDLE 5/32 BK​ Murrays PN 002-0315-22​ One bridle for the Hobie® 17 Sport (with jib) is constructed of black-coated, 5/32" 1x19 to factory specifications. Compare to Hobie 52500201. https://murrays.com/products/h16-trampoline-mesh-3-piece 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-3102-1.jpg?v=1676949786 H-16 3-PIECE MESH TRAMPOLINE-BLACK https://murrays.com/products/h17-sport-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0445-32.jpg?v=1676949783 H-17 SPORT FORESTAY 5/32-BLACK WIRE H17 Sport Forestay 5/32" Murrays Part# 002-0345-32 Black forestay for Hobie® 17 Sport is constructed to factory specifications. Compare to Hobie Part# 52812001 https://murrays.com/products/h17-sport-jib-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0486-00.jpg?v=1676949784 H-17 SPORT JIB HALYARD WITH SHACKLE Hobie 17 Sport Jib Halyard with Shackle - 52661001 Murrays Part# 002-0386-00 Jib halyard with shackle for Hobie 17 Sport is constructed to factory specifications. Compare to Hobie Part# 52661001 https://murrays.com/products/h17-sport-upper-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/UpForestaySwiv.jpg?v=1676949787 H-17S UPPER FORESTAY 5/32" BLACK WIRE H17 Sport Upper Forestay 5/32" Black Wire Murrays Part# 002-0335-02 Black upper forestay for Hobie® 17 Sport is constructed to factory specifications. Compare to Hobie Part# 52812011 https://murrays.com/products/h18-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie_18_Bridle_wire.jpg?v=1727454715 H-18 BRIDLE 5/32" BLACK WIRE Hobie 18 Bridle wire - Hobie part number #60820001 white or #60822001 black. https://murrays.com/products/h18-h21sc-diamond-wire-without-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0494-20.jpg?v=1676949790 H-18 DIAMOND WITHOUT TURNBUCKLE H18 Dimond Wire without Turnbuckle Murrays Part# 002-0494-20 Diamond wire for one side of a Hobie® 18 is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included. Please note: The diamond wire will be constructed with a stud that has left hand threads. Please contact Murrays if you have an older Hobie® 18, as right hand threads may be required. The change to the left handed thread happened some time in the early 80's. https://murrays.com/products/h18-h21sc-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0445-32_b014efca-2652-4c1b-814f-307c5eff29ee.jpg?v=1676949791 H-18/21SC FORESTAY 5/32" WIRE Hobie 18 forestay - Hobie part number 60810021 white or 60812021 black https://murrays.com/products/h18-h21sc-jib-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0486-00_b88acbe0-c3af-4ec6-bb8a-8d0b0a67e437.jpg?v=1676949792 H-18/21SC JIB HALYARD WITH SHACKLE H-18/21 Sport Cruiser Jib Halyard with Shackle Murrays Part# 002-0486-00 Jib halyard with shackle for H18/21 Sport Cruiser is constructed to factory specifications. Please note that the H21SC is differentiated by its 8.5' beam, front trampoline and Hobie® 18 rigging. Order Jib Halyard line separately: 20' of 1/8" line Murrays Part# 39-0221 https://murrays.com/products/h18-h21sc-upper-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0435-02.jpg?v=1676949794 H-18/21SC UPPER FORESTAY 5/32" WIRE https://murrays.com/products/h18sx-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_88dba64a-cc43-4140-aa13-e26bb5d9595e.jpg?v=1676949795 H-18SX BRIDLE 5/32" BLACK WIRE H18SX Bridle 5/32" Black Wire Murrays Part# 002-0615-22 Single black bridle for Hobie® 18SX is constructed of 5/32" wire to factory specifications. Compare to Hobie Cat® Part# 60822001 Black or 60820001 White https://murrays.com/products/h18sx-diamond-wire-without-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0494-20_1777d424-618f-4347-85c9-1e6c22e1a8bd.jpg?v=1676949796 H-18SX DIAMOND WIRE WITHOUT TURNBUCKLE H18SX Diamond Wire without Turnbuckle Murrays Part# 002-0694-20 Diamond wire for Hobie® 18SX is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included. Compare to Hobie Cat® Part# 68750001 https://murrays.com/products/h18sx-jib-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0486-00_6ec2d011-d2d2-44e5-b034-60523263877a.jpg?v=1676949796 H-18SX JIB HALYARD WITH SHACKLE H18SX Jib Halyard with Shackle Murrays Part# 002-0686-00 Jib halyard with shackle for Hobie® 18SX is constructed to factory specifications.; Use 20' of 1/8" line to to complete your jib halyard or our jib halyard kit with sister clips. links below in related items. Compare to Hobie Cat® Part# 68661001 https://murrays.com/products/h18sx-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0445-32_d3b18288-37a1-49f6-bcdb-281b313893d0.jpg?v=1676949799 H-18SX FORESTAY 5/32" BLACK WIRE H18SX Forestay 5/32" Black Wire Murrays Part# 002-0645-12 Black forestay for Hobie® 18SX is constructed to factory specifications. Compare to Hobie Cat® Part# 68814501 https://murrays.com/products/h18sx-shroud-5-32-black-roller-swaged 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_d8da7e32-308c-48a1-9dce-477f9d3f79a6.jpg?v=1676949799 H-18SX SHROUD 5/32" BLACK WIRE ROLLER SWAGED H-18SX Shroud Roller Swaged 5/32" Black Wire Murrays Part# 002-0605-12 Single black shroud (sidestay) for Hobie® 18SX is hydraulically swaged for extra strength and a cleaner connection. Constructed to factory specifications. Compare to Hobie Cat® Part# 68793501 https://murrays.com/products/h20-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_fc96f093-bd43-4d92-82f2-df5f0fbea3cb.jpg?v=1676949800 H-20 BRIDLE 5/32" BLACK WIRE H20 Bridle 5/32" Black Wire Murrays Part# 002-0715-22 One bridle for Hobie® 20 is constructed to factory specifications.  Compare to Hobie Cat® Part# 40822001 https://murrays.com/products/h18sx-upper-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/UpForestaySwiv_fdb73add-8f49-4b17-94eb-6e6ae8a50fba.jpg?v=1676949802 H-18SX UPPER FORESTAY 5/32" BLACK WIRE H18SX Upper Forestay 5/32" Black Wire Murrays Part# 002-0635-02 Black upper forestay for Hobie® 18SX is constructed to factory specifications. Compare to Hobie Cat® Part# 68813501 https://murrays.com/products/h20-diamond-wire-double-without-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0795-20.jpg?v=1676949802 H-20 DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE H20 Diamond Wire Double without Turnbuckle Murrays Part# 002-0795-20 Diamond wire double (includes both sides) for Hobie® 20 is constructed to factory specifications. Without turnbuckle. Compare to Hobie Cat® Part# 41750001 https://murrays.com/products/h20-forestay-5-32-black-with-5-16-stud 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0745-82.jpg?v=1676949804 H-20 FORESTAY 5/32" BLACK WIRE WITH 5/16" STUD H20 Forestay 5/32" Black Wire with 5/16 Stud Murrays Part# 002-0745-82 Lower forestay with 5/16" stud for Hobie® 20 is constructed to factory specifications.  Compare to Hobie Cat® Part# 40822121 https://murrays.com/products/h20-forestay-roller-furling-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0445-32_ac4240cb-802c-4ba5-b5f8-1f3b58eac0c1.jpg?v=1676949805 H-20 FORESTAY ROLLER FURLING 5/32" BLACK WIRE H20 Forestay Roller Furling 5/32" Black Wire Murrays Part# 002-0745-32 Lower forestay for Hobie® 20 with roller furling setup. Constructed to factory specifications.  Compare to Hobie Cat® Part# 48814001 https://murrays.com/products/h20-jib-block-wire-barberhauler 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Murrays_final_navy.png?v=1732639620 H-20 JIB BLOCK WIRE (BARBERHLR) https://murrays.com/products/h20-jib-halyard-roller-furling 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0786-00.jpg?v=1676949808 H-20 JIB HALYARD ROLLER FURLING H20 Jib Halyard Roller Furling Murrays Part# 002-0786-00 Jib halyard for Hobie® 20 with roller furling is constructed to factory specifications. Order 24' of #39-0221 1/8" Dacron line for jib halyard line. Compare to Hobie Cat® Part# 48661001 https://murrays.com/products/h20-jib-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/H-20-jib-halyard.jpg?v=1676949808 H-20 JIB HALYARD WITH SHACKLE H20 Jib Halyard with Shackle Murrays Part# 002-0783-50 Jib halyard with shackle for Hobie® 20 is constructed to factory specifications. Compare to Hobie Cat® Part# 41661001 https://murrays.com/products/h20-shroud-5-32-black-roller-swaged 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_36f896df-7337-4136-8870-182d44e16a52.jpg?v=1676949808 H-20 SHROUD 5/32" BLACK WIRE ROLLER SWAGED H20 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-0705-12 Single shroud (sidestay) for Hobie® 20 is constructed to factory specifications. Hydraulic swaging produces a cleaner, stronger shroud than standard double swaging. Compare to Hobie Cat® Part# 40792001 https://murrays.com/products/h20-upper-forestay-5-32-black-for-roller-furling 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/002-0735-02.jpg?v=1740594273 H-20 UPPER FORESTAY 5/32" BLACK WIRE WITH ROLLER FURLING https://murrays.com/products/h21sc-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_fa48c27c-62f2-4254-bdfc-f41e652cc8b2.jpg?v=1676949812 H-21SC BRIDLE 5/32" WIRE H21 Sport Cruiser Bridle 5/32" Wire Murrays Part# 002-0514-22 One bridle for Hobie® 21SC is constructed of 5/32" wire to factory specifications. Wire has black coating. The H21SC is sometimes confused with the H21SE (Special Edition). Please note that the H21SC is differentiated by its 8.5' beam, front trampoline and Hobie® 18 rigging. https://murrays.com/products/h21se-diamond-wire-without-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0494-20_2d9a0f2a-2c3c-4678-a2ae-e3b67a6c1a53.jpg?v=1676949812 H-21SE DIAMOND WIRE WITHOUT TURNBUCKLE H21 Special Edition Diamond Wire without Turnbuckle Murrays Part# 002-0595-20 Diamond wire without turnbuckle for Hobie® 21SE (Special Edition) is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp. https://murrays.com/products/h21se-shroud-5-32-roller-swaged-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_34bffe59-97b5-4110-baf1-47b7c6a347a8.jpg?v=1676949816 H-21SE SHROUD 5/32" BLACK WIRE ROLLER SWAGED H21 Special Edition Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-0505-12 Single shroud (sidestay) for Hobie® 21 Special Edition has hydraulically swaged fittings for a cleaner, stronger shroud. It is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Note: The H21SE is differentiated by its 10' beam and lack of a front trampoline. https://murrays.com/products/h21se-forestay-5-32 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0445-32_72dee551-4d64-49e0-bd9e-97440ebeac00.jpg?v=1676949816 H-21SE FORESTAY 5/32" BLACK WIRE H21SE Forestay 5/32" Wire Murrays Part# 002-0545-32 Forestay for Hobie® 21SE (Special Edition) is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp. https://murrays.com/products/h21se-upper-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/UpForestaySwiv_5cf4ad18-f211-46bb-b41d-7165f9480e7e.jpg?v=1676949816 H-21SE UPPER FORESTAY 5/32" BLACK WIRE H21SE Upper Forestay 5/32" Wire Murrays Part# 002-0535-02 Black upper forestay for Hobie® 21 Special Edition is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp. https://murrays.com/products/h21se-jib-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0486-00_f6397479-fd4a-4971-b881-647d98e972c5.jpg?v=1676949818 H-21SE JIB HALYARD WITH SHACKLE H21 Special Edition Jib Halyard with Shackle Murrays Part# 002-0586-00 Jib halyard with shackle for Hobie® 21SE (Special Edition) is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp. https://murrays.com/products/halyard-cleat-kit-with-rivets 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1019-Murrays-hobie-halyard-mast-cleat.jpg?v=1676949820 HALYARD CLEAT KIT WITH RIVETS Halyard Cleat Kit with Rivets Murrays Part# 001-1019 The Murrays Halyard Cleat Kit with Rivets pulls the halyard out of the way to keep the battens from hanging up on the halyard of an H16. The kit includes the halyard cleat and sealed stainless rivets. Center-to-center hole spacing is 31mm. *Photo is out of date and kit no longer comes with casings as the rivets that are included come sealed. Compare to Hobie Cat Part 10730000 https://murrays.com/products/harken-468-micro-cam-matic-cleat-aluminum 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0468.jpg?v=1676949820 HARKEN MICRO CAM-MATIC CLEAT Harken Micro Cam-Matic Cleat Murrays Part# 28-0468 Harken's Cam-Matic cleat has multiple rows of high-load ball bearings to reduce friction so that cams open easily for snap-down, rather than draw-through cleating. The cam horns and smooth V-shape guide line for easy entry. This allows precise sail control without having to readjust the cleated line. https://murrays.com/products/halyard-grip-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1140.jpg?v=1676949820 HOBIE HALYARD GRIP KIT HOBIE HALYARD GRIP KIT The Hobie Halyard grip kit is a mast hook that hold the jib halyard off center on the mast so that the jib battens don't hang up on the jib halyard when tacking. Mostly used on the Hobie 16. Hobie part number 114 https://murrays.com/products/hand-winch-3-1-900-lb-capacity 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/13-9272.jpg?v=1676949822 HAND WINCH 3:1 https://murrays.com/products/halyard-shackle-with-twist-pin 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-1032_3_16_Ronstan_halyard_shackle_RF1032.webp?v=1751474417 RONSTAN HALYARD SHACKLE, 3/16" PIN Ronstan Halyard Shackle, 1/4" Pin Murrays Part# 21-1033 The Ronstan Halyard Shackle with Twist Pin's main advantage is that you cant loose any of it once its attached. The top pin holds it on and the bottom pin dose not come out. Never loose your shackle pins again! The 1/4" Halyard Shackle with Twist Pin is used in the following Murrays Products: 02-4383-50 N-5.5SL Jib Halyard w/Shackle https://murrays.com/products/harken-22mm-traveler-track-self-tacking-1-2m 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2720_eaddbecc-e057-4b73-ab90-74e02e007ffd.jpg?v=1676949826 HARKEN 22MM HIGH-BEAM TRACK Harken 22mm High-Beam Track Murrays Part# 28-2725-120 Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. https://murrays.com/products/harken-57mm-carbo-ratchamatic-7-1-low-profile-mainsheet-system 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/H18mainsheet.jpg?v=1740506835 HARKEN 57MM CARBO RATCHAMATIC 7:1 LOW-PROFILE MAINSHEET SYSTEM https://murrays.com/products/harken-57mm-carbo-10-1-low-profile-mainsheet-system 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/10-1Mainsheet.jpg?v=1740506744 HARKEN 57mm CARBO 10:1 SYSTEM https://murrays.com/products/harken-57mm-carbo-ratchamatic-12-1-low-profile-mainsheet-system 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-121.jpg?v=1676949828 HARKEN 57mm CARBO 12:1 SYSTEM Harken 57mm Carbo Ratchamatic 12:1 Low-Profile Mainsheet System Murrays Part# 28-121 The Harken 57mm Carbo Ratchamatic 12:1 Low-Profile Mainsheet System is a Light weight, low profile and very strong. These Carbo AirBlocks® have enormous working range, with a higher working load than standard blocks, even though they are lighter in weight! The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase. https://murrays.com/products/harken-57mm-jib-block-with-ratchet-with-swivel-becket-cam-cleat 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2139.jpg?v=1676949832 HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat Murrays Part# 28-2139 Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2-1/4" Length: 4-15/16" Weight: 9 oz Shackle pin diameter: 3/16" Maximum line diameter: 3/8" Maximum working load: 600 lb. Breaking load: 1500 lb. https://murrays.com/products/harken-57mm-carbo-ratchamatic-8-1-low-profile-mainsheet-system 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8-1_carbo-reeving-diagram-lg.jpg?v=1676949832 HARKEN 57mm CARBO 8:1 SYSTEM Harken 57mm Carbo 8:1 System Murrays Part# 28-81 Lightweight, low profile and very strong, these Carbo AirBlocks® have enormous working range, with a higher working load than standard blocks, even though they are lighter in weight! The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase. https://murrays.com/products/harken-57mm-carbo-side-cover 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2653.jpg?v=1676949832 HARKEN CAM ARM COVER LEFT 57MM WITH NUT Harken Cam Arm Cover Left 57mm with Nut Murrays Part# 28-2653 One Harken replacement right or left 57mm side cover washer for #28-2629 Carbo Ratchamatic base block. #28-2652 Right cam arm washer 57mm is Harken #H-26521B. #28-2653 Left cam arm cover 57mm with nut is Harken #HSB524. https://murrays.com/products/harken-airblock-16mm-cheek 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0416.jpg?v=1676949834 HARKEN 16MM CHEEK BLOCK Harken 16mm Cheek Block Murrays Part# 28-0416 Harken's 16mm check block is a downhaul and turning block and is perfect for small synthetic control lines. 1-13/16" long; 5/8" sheave diameter; 250 lb. SWL; 1200 lb. breaking strength. Use #8 (4mm) RH fasteners. Harken Part# 416 https://murrays.com/products/harken-airblock-16mm-single 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0404.jpg?v=1676949836 HARKEN 16MM SINGLE Harken 16mm Single Murrays Part# 28-0404 The Harken air block offers a very high load in an extremely lightweight block. Excellent for control lines. The block itself is only 1-1/8" long. The 5/8" sheave will accept line as large as 7/32". 250 lb. SWL; 1200 lb. breaking strength. https://murrays.com/products/harken-airblock-16mm-single-with-becket 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0405.jpg?v=1676949836 HARKEN 16MM BLOCK-BECKET Harken 16mm Block-Becket Murrays Part# 28-0405 The Harken air block offers a very high load in an extremely lightweight block. Excellent for control lines. The overall length is only 1-1/2" long. The 5/8" sheave will accept line as large as 7/32". 250 lb. SWL; 1200 lb. breaking strength.  The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb. https://murrays.com/products/harken-airblock-16mm-double 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0406.jpg?v=1676949836 HARKEN 16MM DOUBLE BLOCK Harken 16mm Double Block Murrays Part# 28-0406 The Harken air block offers a very high load in an extremely lightweight block. Excellent for control lines. The block itself is only 1-1/8" long; overall length is 1-11/16. The 5/8" sheave will accept line as large as 7/32". 450 lb. SWL; 1200 lb. breaking strength. The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. https://murrays.com/products/harken-airblock-16mm-single-with-swivel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0417.jpg?v=1676949838 HARKEN 16MM BLOCK-SWIVEL Harken 16mm Block-Swivel Murrays Part# 28-0417 The Harken air block offers a very high load in an extremely lightweight block. The block itself is only 1-13/16" long. The 5/8" sheave will accept line as large as 7/32". 250 lb. SWL; 750 lb. breaking strength; 5/32" shackle pin diameter. Harken Part# 417 https://murrays.com/products/harken-ball-bearing-delrin-1-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-hsb243.png?v=1676949839 HARKEN BALL BEARING DELRIN 1/8" (EACH) Harken Ball Bearing Delrin 1/8" Murrays Part#  28-HSB243 Harken 1/8" replacement Delrin ball bearings are sold individually. https://murrays.com/products/harken-airblock-16mm-triple 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0408.jpg?v=1676949840 HARKEN 16MM TRIPLE BLOCK Harken 16mm Triple Block Murrays Part# 28-0408 The Harken air block offers a very high load in an extremely lightweight block. The block is only 1-13/16" long. The 5/8" sheave will accept line as large as 7/32". 700 lb. SWL; 1200 lb. breaking strength.  Harken Part# 408 https://murrays.com/products/harken-ball-bearing-sheave 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0160.jpg?v=1676949840 HARKEN 29MM BULLET SHEAVE Harken 29mm Bullet Sheave Murrays Part# 28-0160 Harken's downhaul/halyard sheave makes raising the sail and/or adjusting the downhaul with Harken ball bearing sheaves much easier. This is a direct replacement for the sheaves that came with early Hobie 17s. https://murrays.com/products/harken-becket-roller 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-hsb26.jpg?v=1676949842 HARKEN BECKET ROLLER Harken Becket Roller Murrays Part# 28-HSB26 Replacement becket roller for Harken blocks measures 3/4" long by 1/2" diameter with 1/4" hole. https://murrays.com/products/harken-bearing-replacement-21 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0177.jpg?v=1676949843 HARKEN 1/4" TORLON BALL BEARING (21) Harken 1/4" Torlon Ball Bearing-21 Balls Murrays Part# 28-0177 1/4" Torlon replacement ball bearings fit Harken 158, 159, 172, 210, 212, 214, 215, 249, 440 and 441. A bearing loader, #28-HSB8 (sold separately), is required for installation. Sold in packages of 21 https://murrays.com/products/harken-block-29mm-carbo-single-fixed 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0348.jpg?v=1676949846 HARKEN 29MM BLOCK Harken 29mm Block Murrays Part# 28-0348 Harken's low-friction 29mm Carbo AirBlock® is compact, lightweight and extremely strong. A companion to the popular Harken® Black Magic® line, this small, compact block has a very high working load for safe, easy trimming. This pulley is a popular addition to spinnaker systems. Harken #348. https://murrays.com/products/harken-block-29mm-carbo-double-with-swivel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0342.jpg?v=1676949847 HARKEN 29mm DOUBLE BLOCK-SWIVEL Harken 29mm Double Block - Swivel Murrays Part# 28-0342 This compact double block is extremely strong and features a U-Lock to hold the swivel in front/side position, or to let it spin freely. Use this miniature Carbo as a mainsheet block on small dinghies such as the Optimist, to increase downhaul, or for low-friction control blocks on any size boat. https://murrays.com/products/harken-block-29mm-carbo-single-with-swivel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0340.jpg?v=1676949848 HARKEN 29MM BLOCK-SWIVEL Harken 29mm Block - Swivel Murrays Part# 28-0340 Harken's compact 29mm Carbo block is extremely strong. Use as a mainsheet block on small boats or for low-friction control block on any size boat. Specifications: 330 lb. SWL 1000 lb. breaking strength 5/16" maximum line diameter 5/32" shackle pin diameter 2-5/8" long Weight with shackle .9 oz. Harken Part# 340 https://murrays.com/products/harken-block-29mm-carbo-triple-with-carbo-cam-becket 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0347.jpg?v=1676949849 HARKEN 29MM TRIPLE BLOCK- BECKET, CAM CLEAT Harken 29mm Triple Block -Becket, Cam Cleat Murrays Part# 28-0347 Harken's 29mm Carbo block is compact and extremely strong. This triple features U-Locks to hold the swivel in front/side position, or to let it spin freely. The compact cam arm supports high-load purchases of 5:1 or 6:1. Specifications: 990 lb. SWL 2000 lb. breaking strength 5/16" maximum line diameter 3/16" shackle pin diameter 3-3/8" long Harken Part# 347 https://murrays.com/products/harken-block-40mm-carbo-fiddle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2655.jpg?v=1676949849 HARKEN 40MM FIDDLE BLOCK-SWIVEL Harken 40mm Fiddle Block - Swivel Murrays Part# 28-2655 Harken's Carbo fiddle block features high-load ball bearings with fitted races for low-friction operation. The 40 mm fiddle is an excellent choice for a Hobie® 20 barber hauler block, for 3:1 and 4:1 tackles on dinghy vangs and mainsheets, as well as for controls such as cunninghams and internal boom outhauls on larger boats. https://murrays.com/products/harken-block-29mm-carbo-triple-with-swivel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0344.jpg?v=1676949851 HARKEN 29MM TRIPLE BLOCK-SWIVEL Harken 344 Harken’s compact 29mm Carbo block is extremely strong. This block features a U-lock to hold the swivel in front/side position, or to let it spin freely. The triple’s compact cam arm supports high-load purchases of 5:1 or 6:1. Specifications: 990 lb. SWL 2000 lb. breaking strength 5/16" maximum line diameter 3/16" shackle pin diameter 2-7/8" long Harken #344. https://murrays.com/products/harken-block-40mm-carbo-fixed-90-degree-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2659.jpg?v=1676949851 HARKEN 40MM 90° BLOCK Harken 40mm 90° Block Murrays Part# 28-2659 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming. Harken Part# 2659 https://murrays.com/products/harken-block-40mm-carbo-single 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2636.jpg?v=1676949853 HARKEN 40MM BLOCK-SWIVEL Harken 40mm Block - Swivel Murrays Part# 28-2636 Carbo AirBlocks® are 60% stronger and 30% lighter than Harken's classic blocks. Use the 40mm Carbo for jib and mainsheet systems on high-performance dinghies and for loaded control lines on small keelboats. https://murrays.com/products/harken-block-40mm-carbo-triple-with-swivel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2640.jpg?v=1676949854 HARKEN 40MM TRIPLE BLOCK SWIVEL Harken 40mm Triple Block - Swivel Murrays Part# 28-2640 Low-friction Carbo AirBlocks® are lightweight, strong, reliable and affordable. These small, compact blocks have very high working loads for safe, easy trimming. This is a fantastic block for a performance AND economical H16 mainsheet system top block. Use it with a 57mm base block for 6:1 performance system. https://murrays.com/products/harken-block-57mm-carbo-boom-6-sheave 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-10925.jpg?v=1676949855 HARKEN 57MM CARBO BOOM BLOCK 6-SHEAVE Harken 57mm Carbo Boom Block 6-Sheave Murrays Part# 28-10925 Harken 57mm Carbo Blocks have an enormous working range and a very high strength-to-weight ratio. This 57mm Carbo boom block has 6 sheaves. A swivel keeps the boom block aligned with your base block. https://murrays.com/products/harken-block-57mm-carbo-double-with-ratchamatic-swivel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2634.jpg?v=1676949855 HARKEN 57MM DOUBLE RATCHAMATIC BLOCK-SWIVEL Harken 57mm Double Ratchamatic Block-Swivel Murrays Part# 28-2634 The 57mm Harken Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless. https://murrays.com/products/harken-block-57mm-carbo-quad 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2631.jpg?v=1676949857 HARKEN 57MM QUAD BLOCK-SWIVEL Harken 57mm Quad Block-Swivel Murrays Part# 28-2631 57mm Carbo Blocks have an enormous working range and a very high strength-to-weight ratio. Use with #28-2632 base block for an 8:1 Carbo low-profile mainsheet system. https://murrays.com/products/harken-block-57mm-single-carbo-ratchamatic 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2625.jpg?v=1676949858 HARKEN 57mm SINGLE CARBO RATCHAMATIC BLOCK Harken 57mm Single Carbo Ratchamatic Block Murrays Part# 28-2625 Under low loads, this lightweight, high strength Harken 2-1/4" ratchet block rolls freely in both directions like a non-ratcheting block, but automatically engages the ratchet mechanism as loads increase, giving sailors an additional holding power of 10:1. Specifications: 500 lb. SWL 2000 lb. breaking strength 3/8" maximum line diameter 2-1/4" sheave diameter 4-1/16" long Weighs 3.7 oz. 3/16" shackle pin diameter Harken Part# 2625 https://murrays.com/products/harken-block-57mm-carbo-triple-with-swivel-becket 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2605.jpg?v=1676949859 HARKEN 57MM TRIPLE BLOCK-SWIVEL, BECKET Harken 57mm Triple Block-Swivel, Becket Murrays Part# 28-2605 This Carbo AirBlock® has an enormous working range, with a higher working load than standard blocks, even though it is lighter in weight! This is a fantastic option for the top block for a 7:1 mainsheet system, such as an Hobie 18 catamaran or Hobie Miracle 20 catamaran. https://murrays.com/products/harken-block-57mm-carbo-triple-with-swivel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2604.jpg?v=1676949859 HARKEN 57MM TRIPLE BLOCK-SWIVEL Harken 57mm Triple Block-Swivel Murrays Part# 28-2604 Harken's low-friction Carbo AirBlock® is lightweight, strong, reliable and affordable. It has an enormous working range, with a very high working load for safe, easy trimming. It has a higher working load than standard blocks, even though it is lighter in weight! Use with #28-2629 base block for a 6:1 carbo low-profile mainsheet system. Can be used as top block for H16 6:1 mainsheet system or a light air H18 6:1 mainsheet system. https://murrays.com/products/harken-block-6-1-carbo-ratchamatic-base 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2629.jpg?v=1676949861 HARKEN 57MM TRIPLE RATCHAMATIC BLOCK-SWIVEL, CAM CLEAT Harken 57mm Triple Ratchamatic Block-Swivel, Cam Cleat Murrays Part# 28-2629 The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase. Shifting between ratchet and light air modes is seamless. Unloaded the sheet runs freely during mark roundings and jibes. Ratchet engagement may be adjusted to a higher or lower load according to strength and sailing style. https://murrays.com/products/harken-block-7-1-carbo-ratchamatic-base 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2620-7.jpg?v=1676949862 HARKEN BLOCK 7:1 CARBO RATCHAMATIC BASE https://murrays.com/products/harken-block-8-1-carbo-ratchamatic-base 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2632.jpg?v=1676949863 HARKEN 57MM TRIPLE RATCHAMATIC BLOCK-SWIVEL, CAM CLEAT, 40MM BLOCK Harken 57mm Triple Ratchamatic® Block-Swivel, Cam Cleat, 40 mm Block Murrays Part# 28-2632 The Harken Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase. Shifting between ratchet and light air modes is seamless. Unloaded, the sheet runs freely during mark roundings and jibes. Ratchet engagement may be adjusted to a higher or lower load according to strength and sailing style. https://murrays.com/products/harken-block-assembly-29mm-carbo-jib-clew 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0371.jpg?v=1676949865 HARKEN 29MM CLEW BLOCK Harken 29mm Clew Block Murrays Part# 28-0371 Harken's 29mm Carbo block assembly is designed to be sewn onto the clew of a sail. It can be used to replace the jib clew block on Hobie® 14 and 16. Specifications: 330 lb. SWL; 1000 lb. breaking strength; 5/16" maximum line diameter.  On Hobie® 14 and 16, attach with #21-1032 twist pin halyard shackle. Harken Part# 371 https://murrays.com/products/harken-block-carbo-quad-with-swivel-40mm 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2654.jpg?v=1676949866 HARKEN 40MM QUAD BLOCK Harken 40mm Quad Block Murrays Part# 28-2654 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming. https://murrays.com/products/harken-block-carbo-stand-up-fixed 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0349.jpg?v=1676949867 HARKEN CARBO STANDUP FIXED 29MM Harken 29mm Stand-up Block Murrays Part# 56-31297 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.  Specifications: 330 lb. SWL 1000 lb. breaking strength 5/16" maximum line diameter 1-1/8" sheave diameter 2-3/16" long Harken Part #349 Nacra Part# 31297 https://murrays.com/products/harken-block-double-2-25 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0003.jpg?v=1676949871 HARKEN 2.25" BLOCK DOUBLE https://murrays.com/products/harken-block-double-bullet 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0084.jpg?v=1676949873 HARKEN 29MM DOUBLE BULLET BLOCK Harken 29mm Double Bullet Block Murrays Part# 28-0084 Medium-size Harken double bullet block has Delrin ball bearings and works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. https://murrays.com/products/harken-block-double-micro 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0226.jpg?v=1676949873 HARKEN BLOCK DOUBLE MICRO Harken Block Double Micro Murrays Part# 28-0226 Harken ball bearing micro double block with stainless side plates. Low-friction Micro blocks are compact and lightweight, making them ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Specifications: 1/4" maximum line capacity 350 lb. SWL 1200 lb. breaking strength 2" long Harken Part# 226 Hobie Part# H226S https://murrays.com/products/harken-block-double-with-becket-2-25 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0004.jpg?v=1676949875 HARKEN 2.25" BLOCK DOUBLE WITH BECKET Harken Block Double with Becket 2.25" Harken PN 004 Sheave Size 57mm 2.25 Inches Max Line Size 12MM  7/16" Max Working Load 454kg  1000lb Breaking Load 1361kg 3000lb The 2.25 in (57mm) blocks are compact and lightweight, with fast trim and release under high or low loads. Perfect for dinghies, scows, beachcats and iceboats, as well as small offshore racers and cruisers. https://murrays.com/products/harken-block-double-with-becket-bullet 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0085.jpg?v=1676949877 HARKEN 29MM DOUBLE BULLET BLOCK-BECKET Harken 29mm Double Bullet Block-Becket Murrays Part# 28-0085 Medium-size Harken double bullet block with becket has Delrin ball bearings and works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection. https://murrays.com/products/harken-block-micro-cheek 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0233.jpg?v=1676949877 HARKEN 22MM CHEEK BLOCK Harken 22mm Cheek Block Murrays Part# 28-0233 Harken micro cheek is used as a downhaul and turning block and as the Hobie 16 jib traveler control line block on the front crossbar. Specifications: 200 lb. SWL 1200 lb. breaking strength 1/4" maximum line diameter 7/8" sheave diameter 2-1/2" long https://murrays.com/products/harken-block-micro-swivel-22mm 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0292.jpg?v=1676949881 HARKEN 22MM BLOCK-SWIVEL Harken 22mm Block-Swivel Murrays Part# 28-0292 Low Friction Micro Blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies and lightly loaded control lines on boats of all sizes. https://murrays.com/products/harken-block-single-2-25-hexaratchet 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0019.jpg?v=1676949881 HARKEN 2.25" HEXARATCHET BLOCK-SWIVEL, STARBOARD Harken Block Single 2.25" Hexaratchet Murrays Part# 28-0019 Sheave Size 57mm 2.25" Max Line Size 10mm 3/8" Max Working Load 227KG 500lb Breaking Strength 907kg 2000lb Holding Power 10:1 Hexaratchets grip loaded sheets, yet allow sailors to ease and trim quickly and with complete control. A switch on the side engages and disengages the ratchet mechanism. Use the 043 or 044 revers ratchets with the 019 or 050 single with becket on spinnaker and jib sheets where ratchets rotate in opposite directions an https://murrays.com/products/harken-block-single-bullet 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0082.jpg?v=1676949881 HARKEN 29MM BULLET BLOCK Harken 29mm Bullet Block Murrays Part# 28-0082 Medium-size Harken single bullet block with Delrin® ball bearings works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. https://murrays.com/products/harken-block-single-3-hexaratchet 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0009.jpg?v=1676949883 HARKEN 3.00" HEXARATCHT BLOCK-SWIVEL, STARBOARD Harken 3.00" Hexaratchet® Block-Swivel, Starboard Murrays Part# 28-0009 Hexaratchets grip loaded sheets, yet allows sailors to ease and trim quickly and with complete control. A switch on the side engages and disengages the ratchet mechanism. Use the 043 or 044 revers ratchets with the 019 and 009 singles or 050 single with becket on spinnaker and jib sheets where ratchets rotate in opposite directions and on/off switches face up. https://murrays.com/products/harken-block-single-bullet-wire 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0098.jpg?v=1676949885 HARKEN 29MM WIRE BULLET BLOCK Harken 29mm Wire Bullet Block Murrays Part# 28-0098 Low-friction bullet blocks lead control lines aft. This block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings, sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection. This wire bullet block uses roller bearings to carry higher loads and features Hardkote-anodized Teflon®-impregnated aluminum sheaves for strength and corrosion resistance. https://murrays.com/products/harken-block-single-bullet-big-with-becket 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0126.jpg?v=1676949885 HARKEN 38MM BIG BULLET BLOCK-BECKET https://murrays.com/products/harken-block-single-bullet-big 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0125.jpg?v=1676949885 HARKEN 38MM BIG BULLET BLOCK Harken 38mm Big Bullet Block Murrays Part# 28-0125 Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. https://murrays.com/products/harken-block-single-bullet-big-with-swivel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0168.jpg?v=1676949887 HARKEN 38MM BIG BULLET BLOCK-SWIVEL Harken 38mm Big Bullet Block-Swivel Murrays Part# 28-0168 Low-friction bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. Harken's big single bullet block with swivel has free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection. https://murrays.com/products/harken-block-single-carbo-ratchet-with-swivel-40mm 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2608.jpg?v=1676949888 HARKEN 40MM RATCHET BLOCK-SWIVEL Harken 40mm Ratchet Block-Swivel Murrays Part# 28-2608 This small ratchet with on/off switch is ideal for jib sheets and spinnakers on small dinghies where size and weight are critical. Eight-faceted machined aluminum sheave holds line securely. Hard coat anodizing provides durability. https://murrays.com/products/harken-block-single-micro 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0224.jpg?v=1676949890 HARKEN 22MM BLOCK Harken 22mm Block Murrays Part# 28-0224 This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system. https://murrays.com/products/harken-block-single-with-becket-bullet 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0083.jpg?v=1676949892 HARKEN 29MM BULLET BLOCK-BECKET Harken 29mm Bullet Block-Becket Murrays Part# 28-0083 Medium-size Harken single bullet block with becket has Delrin® ball bearings and works well for control line or jib sheeting lines. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection. https://murrays.com/products/harken-block-single-with-becket-micro 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0225.jpg?v=1676949892 HARKEN 22MM BECKET BLOCK Harken 22mm Becket Block Murrays Part# 28-0225 Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Harken ball bearing micro single block with becket has stainless side plates. https://murrays.com/products/harken-block-single-with-swivel-becket-bullet 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0167.jpg?v=1676949894 HARKEN 29MM BULLET BLOCK-SWIVEL, BECKET Harken 29mm Bullet Block-Swivel, Becket Murrays Part# 28-0167 Medium-size Harken single bullet block with swivel and becket has Delrin ball bearings. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection. https://murrays.com/products/harken-block-single-with-swivel-bullet 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0166.jpg?v=1676949896 HARKEN 29MM BULLET BLOCK-SWIVEL Harken 29mm Bullet Block - Swivel Murrays Part# 28-0166 Medium-size Harken double bullet block with swivel has Delrin ball bearings. The low-friction bullet block is compact and lightweight, with fast trim and release under high or low loads. Free-rolling Delrin® ball bearings. Sheave and sideplates are UV-stabilized with carbon-black additive for maximum protection. https://murrays.com/products/harken-block-triple-micro 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0228.jpg?v=1676949896 HARKEN TRIPLE MICRO BLOCK Harken Triple Micro Block Murrays Part# 28-0228 Harken 22mm ball bearing micro triple block with stainless side plates. Specifications: 1/4" maximum line capacity 500 lb. SWL 1200 lb. breaking strength 7/8" sheave 2" long Harken Part# 228 Hobie part# H228  https://murrays.com/products/harken-block-triple-with-becket-cam-micro 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0231.jpg?v=1676949897 HARKEN 22MM TRIPLE BECKET BLOCK-CAM CLEAT Harken 22mm Triple Becket Block-Cam Cleat Murrays Part# 28-0231 Harken ball bearing micro triple block with becket and cam has free-rolling Delrin® ball bearings. Sheaves are UV-stabilized with carbon-black additive for maximum protection. Stainless steel side plates give strength. Harken's low-friction micro blocks are compact and lightweight, with fast trim and release under high or low loads. https://murrays.com/products/harken-block-wire-swivel-bullet-29mm 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0183.jpg?v=1676949898 HARKEN 29MM WIRE BULLET BLOCK-SWIVEL Harken 29mm Wire Bullet Block-Swivel Murrays Part# 28-0183 Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control lines applications. ire Bullet blocks use roller bearings to carry higher loads and feature hardcoat-anodized PTFE impregnated aluminum sheaves for strength and corrosion resistance. https://murrays.com/products/harken-blocks-micro-singles-linked 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0232.jpg?v=1676949900 HARKEN 22MM TRAVELER BLOCK Harken 22mm Traveler Block Murrays Part# 28-0232 Low-friction, back-to-back micro blocks are compact and lightweight. Specifications: 200 lb. SWL 1200 lb. breaking strength 1/4" maximum line diameter 7/8" sheave diameter 2-3/4" long Harken Part# 232 Hobie Cat® Part# H232 https://murrays.com/products/harken-cam-matic-cam-cleat-aluminum 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0150.jpg?v=1676949900 HARKEN ALUMINUM CAM-MATIC CLEAT-150 Harken Standard Cam-Matic Cleat -150 Murrays Part# 28-0150 For high load/high-wear applications. Cam-Matic® ball bearing cam cleats engage and release easily, hold securely, and work with a wide range of line types and sizes. Cam teeth are smooth to protect line and because tooth grip is not required to close the pawls. Three rows of UV-stabilized, Delrin® ball bearings provide minimal friction for easy line engagement and release, even under high loads. https://murrays.com/products/harken-cam-matic-cleat-carbo-cam 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0365.jpg?v=1676949901 HARKEN STANDARD CARBO-CAM CLEAT Harken Standard Carbo-Cam Cleat Murrays Part# 28-0365 Harken Cam-Matic® ball bearing cam cleats engage and release easily, hold securely, and work with a wide range of line types and sizes. Cam teeth are smooth to protect line and because tooth grip is not required to close the pawls. Multiple rows of UV-stabilized, Delrin® ball bearings provide minimal friction for easy line engagement and release, even under high loads. https://murrays.com/products/harken-cam-matic-replacement-spring-for-150-365 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Cam-Matic-Spring-150.jpg?v=1676949902 HARKEN STANDARD CAM CLEAT SPRING Harken Standard Cam Cleat Spring Murrays Part# 28-0056 The Harken Cam-Matic Replacement Spring for 150, 365 for cleats #28-0150 and #28-0365.  Harken Part# MS-006 https://murrays.com/products/harken-cam-matic-wedge-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0145.jpg?v=1676949904 HARKEN STANDARD WEDGE KIT Harken Standard Wedge Kit Murrays Part# 28-0145 Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Harken 15-degree wedge kit fits Harken 150 (#28-0150) and 365 Cam-Matics (#28-0365). 1-1/2" fastener spacing.  Harken Part#145 Hobie Part# H145  https://murrays.com/products/harken-cam-matic-spring-for-h423 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0056-1.jpg?v=1676949904 HARKEN MICRO CAM CLEAT SPRING Harken Micro Cam Cleat Spring H423 Murrays Part# 28-0057 The Harken Cam-Matic Spring for H423- Cam spring for discontinued Harken cams #338 and #423.  Harken Part# MS-093 https://murrays.com/products/harken-eyestrap-for-150-365-cam-matic 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0137.jpg?v=1676949908 HARKEN 38MM STANDARD EYESTRAP Harken 38mm Standard Eyestrap Murrays Part# 28-0137 Eyestrap fits #28-0150 and #28-0365 cams. 3000 lb. breaking strength. Use 1/4" RH fasteners with 1-1/2" spacing. Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. https://murrays.com/products/harken-eyestrap-for-cam-matic-338-423-468-471 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0281.jpg?v=1676949909 HARKEN 27MM MICRO EYESTRAP Harken 27mm Micro Eyestrap Murrays Part# 28-0281 Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. Eyestrap for Cam-Matic 338, 423, 468, 471 Stainless steel eyestrap mounts on Harken aluminum Micro Cam-Matic (#28-0338) or Micro Carbo-Cam (#28-0423). https://murrays.com/products/harken-micro-cam-wedge-kit-for-468-471 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0297.jpg?v=1676949914 HARKEN MICRO WEDGE KIT Harken Micro Wedge Kit Murrays Part# 297 Micro cam wedge kit fits #28-0468 and #28-0471 Harken cam cleats. Weighs .16 oz.; 1-1/16 " fastener spacing. Harken Part#297 Hobie part# H297 https://murrays.com/products/harken-micro-carbo-cam-cleat 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0471.jpg?v=1676949916 HARKEN MICRO CARBO-CAM CLEAT Harken Micro Carbo-Cam Cleat Murrays Part# 28-0471 Harken's Cam-Matic cleat has multiple rows of high-load ball bearings to reduce friction so that cams open easily for snap-down, rather than draw-through cleating. The cam horns and smooth V-shape guide line for easy entry. This allows precise sail control without having to readjust the cleated line. https://murrays.com/products/harken-rebuild-kit-for-150-cam-matic-reg-cleat 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0150KIT.jpg?v=1676949916 HARKEN 150 CAM-MATIC CLEAT REBUILD KIT-1993 & NEWER Harken 150 Cam-Matic Cleat Rebuild Kit - 1993 and Newer Murrays Part# 28-0150KIT This rebuild kit is the answer when plastic parts on Harken's 150 Cam-Matic® Cleat have worn out or suffered UV damage, and/or when the springs need to be replaced. https://murrays.com/products/harken-roller-furling-drum-hi-load 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0165.jpg?v=1676949917 HARKEN STANDARD FURLING DRUM-3MM LUFF WIRE Harken Standard Furling Drum-3mm Luff Wire Murrays Part# 28-0165 Harken's high load drum features multiple stacked races of bearings to ensure smooth rotation under load. https://murrays.com/products/harken-roller-furling-swivel-hi-load 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0164.jpg?v=1676949918 HARKEN STANDARD FURLING SWIVEL-3MM LUFF WIRE Harken Standard Furling Swivel-3mm Luff Wire Murrays Part# 28-0164 One of the simplest, strongest and least expensive roller furling swivels for roller furling jibs. SWL of 950 lbs.; distance between pins is 2-1/2". Harken Part# 164 https://murrays.com/products/harken-sail-chafe-protector 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0285.jpg?v=1676949919 HARKEN SAIL CHAFE PROTECTOR (2) Harken Sail Chafe Protector Murrays Part# 28-0285 Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18 https://murrays.com/products/harken-shackle-stamped-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0138.jpg?v=1676949920 HARKEN 6MM STAMPED SHACKLE Harken 6mm Stamped Shackle Murrays Part# 28-0138 Harken's stainless stamped D-shackle has 1/4" diameter pin. For Harken 3.00" blocks. Stamped shackles are used on most Harken Small Boat Blocks and are appropriate for low loads. For higher loads, select forged and high-resistance shackles instead. https://murrays.com/products/harken-screw-cleat-position-short 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-hfs1.jpg?v=1676949921 HARKEN SCREW: CLEAT POSITION (SHORT) Harken Screw: Cleat Position (Short) Murrays Part# 28-HFS1 Short screw is used to adjust cam cleat angle position on Harken "Classic" (not Carbo) base blocks. https://murrays.com/products/harken-shackle-stamped-3-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0072.jpg?v=1676949922 HARKEN SHACKLE STAMPED 3/16" Harken Shackle Stamped 3/16" Murrays Part# 28-0072 Harken's stainless stamped D-shackle has 3/16" diameter pin. For Harken 2.25" blocks https://murrays.com/products/harken-sheave-ball-bearing-16mm 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0415.png?v=1676949924 HARKEN 16MM SHEAVE Harken Sheave Ball Bearing 16mm The Harken Sheave Ball Bearing 16mm is the replacement for Harken 16mm air blocks. UV-stabilized Delrin® sheave with stainless steel ball bearings. Specifications: 5/8" sheave diameter; 3/16" hole diameter, 5/16" wide; 3/16" maximum line diameter; 250 lb. safe working load. Harken #415. https://murrays.com/products/harken-soft-attach-block-18mm 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2698.jpg?v=1676949925 HARKEN 18MM FLY SOFT-ATTACH BLOCK Harken 2698 18mm FLY SOFT-ATTACH BLOCK https://murrays.com/products/harken-spacer-for-f18-fairlead 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-4022.jpg?v=1676949925 HARKEN F18 FAIRLEAD SPACER Harken Fairlead Spacer F18 Murrays Part# 28-4022 Mounted on a mainsheet base block, this plastic spacer provides a smooth surface to guide the line for the fairlead. Sold individually https://murrays.com/products/harken-stand-up-spring 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0071.jpg?v=1676949926 HARKEN 22MM SPRING Harken 22mm Spring Murrays Part# 28-0071 Harken universal stand-up spring supports blocks on pad eyes, eyestraps, bases and traveler cars. Weight: .32 oz. This works well with snap shackle w/tack to upgrade a typical beachcat mainsheet system. https://murrays.com/products/harken-traveler-car-1250-fixed-sheave 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2736.jpg?v=1676949928 HARKEN 22MM HIGH-LOAD 1250 CAR-FIXED SHEAVES, EYESTRAP Harken 22mm High-Load 1250 Car-Fixed Sheaves, Eyestrap Murrays Part# 28-2736 Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. https://murrays.com/products/harken-traveler-car-bearing-loader 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/28-HSB8_5f9869ed-a907-49f5-b5d8-336731eb2921.jpg?v=1696532423 HARKEN TRAVELER CAR BEARING LOADER Harken Traveler Car Bearing Loader https://murrays.com/products/harken-traveler-car-end-plates 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-hsb78.jpg?v=1676949929 HARKEN TRAVELER CAR END PLATES (2) Harken Traveler Car End Plates Murrays Part# 28-HSB78 End cap kit for #28-0214 Harken traveler car includes 2 end caps, screws, blue loc-tite and instructions. Sold as a pair https://murrays.com/products/harken-traveler-car-self-tacking-jib 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2732.jpg?v=1676949930 HARKEN 22MM LOW-LOAD LOOP CAR Harken 22mm Low-Load Loop Car Murrays Part# 28-2732 Harken's small boat CB jib car for Ti-lite is 2-7/8" long and 2-1/4" wide. The card body height is 15/16"; weighs 4 oz.; 500 lb. maximum working load; 2500 lb. breaking load. Note: This track is compatible only with Harken low-profile traveler cars (#28-2732, #28-2736 and #28-2738). Harken Part# 2732 https://murrays.com/products/harken-wire-fairlead-for-468-471 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0475.jpg?v=1676949932 HARKEN MICRO WIRE FAIRLEAD Harken Micro Wire Fairlead Murrays Part# 28-0475 Harken's wire fairlead places the fairlead ahead of the cam and holds line at cleat when not in use. Fits Harken 468 and 471 cams. Wire fairleads maintain a low profile while holding the line close to the cleat. https://murrays.com/products/harken-traveler-end-stops-pair 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0173.jpg?v=1676949933 HARKEN 22MM ENDSTOP- LOW BEAM Harken 22mm Endstops - Low Beam Murrays Part# 28-0173 Pair of end stops to fit Harken #2720 traveler track. Use 5mm or #10FH fasteners. Approximately 7/8". For new style low profile tracks. Sold in Pairs https://murrays.com/products/harken-block-29mm-t2-soft-attach-block 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-2146.jpg?v=1676949933 HARKEN 29MM T2 SOFT-ATTACH BLOCK Harken 29mm T2 Soft-Attach Block Murrays Part# 28-2146 For catamarans, this tie-on block eliminates the need for shackles, posts, swivels, etc. It is ultra-lightweight and sized like a bullet-block. Specifications: 1-1/8" sheave diameter 330 lb. SWL 1000 lb. breaking strength 5/16" maximum line diameter The high-strength composite T2™ is the first block with no metal shackles or rivets. https://murrays.com/products/harken-traveler-track-end-stops-pair 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0174.jpg?v=1676949933 HARKEN 22MM END STOPS HIGH-BEAM https://murrays.com/products/harken-x-treme-angle-fairlead-for-468-471 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/28-0476.jpg?v=1676949936 HARKEN STANDARD X-TREME ANGLE FAIRLEAD Harken Standard X-Treme Angle Fairlead Murrays Part# 28-0150 The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. fits #28-0468 Micro Cam-Matic Aluminum and 28-0471 Micro Carbo Cam. Specifications: 7/8" height above cam; 1-7/16" high; 1-5/16" long; 2" wide; weighs 1 oz.; 1-1/16" fastener spacing. Harken Part# 375 https://murrays.com/products/headboard-replacement-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1014.jpg?v=1676949937 HEADBOARD REPLACEMENT KIT Headboard Replacement Kit Murrays Part# 001-1014 Headboard Replacement Kit includes one pair of anodized aluminum plates with rivets to be set with a hammer. Plates measure 5" high x 4" wide x 6-1/4 diagonal. Replacement rivets are available separately (#19-5006). https://murrays.com/products/hawaiian-catamaran-righting-system 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-3293-2-400x400.jpg?v=1733508163 H-14/16 HAWAIIAN RIGHTING H14/16 Hawaiian Catamaran Righting System Murrays Part# 001-3293 The Hawaiian Catamaran Righting System doubles as a preventer line. Big 1/2" braided righting line is suspended by shock cord under the trampoline. Lines terminate at the transom. Behind-the-back support allows lighter crews to combine weight or solo skippers to have a free hand for scooping up water (as with the Bucket Up Righting Aid) to add leverage. Racing class legal. https://murrays.com/products/heavy-duty-swivel-plate-for-cleat-and-bullseye 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3012.jpg?v=1676949937 HEAVY DUTY SWIVEL PLATE FOR CLEAT AND BULLSEYE Heavy Duty Swivel Plate for Cleat and Bullseye Murrays Part# 25-3012 Heavy Duty Swivel Plate for Cleat and Bullseye. The HD swivel is the base plate for many catamaran and dingy sheeting systems. Found on all models of Hobie cats, as well as many Nacra and Prindle catamarans, as well as dingies, larger sailboats and cruising craft. The HD version of our Swivel Plate https://murrays.com/products/hi-low-trapeze-adjustment-kit-no-cut 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1130.jpg?v=1676949941 HIGH-LOW TRAPEZE ADJUSTMENT KIT: NO CUT Murrays Part# 001-1130 Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings. We suggest purchasing Can't Miss Rings (#01-0124) to supply a handle down low when needed. Order shock cord separately https://murrays.com/products/hi-low-trapeze-adjustment-kit-with-handle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1140.jpg?v=1676949941 HIGH-LOW TRAPEZE ADJUSTMENT KIT WITH HANDLE Hi-Low Trapeze Adjustment Kit with Handle Murrays Part# 001-1140 Simple and adjustable on the fly, with constant upward tension on the trapeze ring and separate on-the-wire height adjustment. Easy to hook up and hike out with no initial adjustments. Very low stretch lines and Ronstan® turning blocks and aluminum Clamcleats® with roller fairleads for 2:1, easy-pull, easy-release height adjustment. Crew can move fore or aft while maintaining proper height. Constant, smooth-action tension on the trapeze ring https://murrays.com/products/heavy-duty-swivel-with-aluminum-cam-roller-fairlead 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3020.jpg?v=1676949941 HEAVY DUTY SWIVEL WITH ALUMINUM CAM AND ROLLER FAIRLEAD Heavy Duty Swivel with Aluminum Cam Roller Fairlead Murrays Part# 25-3020 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. This is a Murrays product that features an Aluminum Harken 150 cam cleat, and HD swivel plate and a HD roller fairlead. The advantage to the roller fairlead is that it can take a larger line diameter, up to 1/2", and handle heavy loads at extreme angles. Making it ideal for larger catamarans and sailors in high wind areas. https://murrays.com/products/hobie-16-aussie-jib-halyard-kit-with-pigtail 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3302-Hobie-16-aussie-jib-halyard-instrustions.png?v=1778186750 H-16 AUSSIE JIB HALYARD KIT WITH PIGTAIL Hobie 16 Aussie Jib Halyard Kit with Pigtail Murrays Part# 001-3302 Reduce mast compression by 66%! The Aussie Jib Halyard Kit for the Hobie® 16 allows easier tacking, better mast rotation and consistent mast bend! Use with existing lower forestay. The "fail-safe" pigtail keeps block failure from resulting in de-masting. A similar system is stock on new Hobie 16's. Complete kit includes everything you need: hardware with all Harken blocks, 70' of prestretched line, zippered pouch and instructions. 80660000 https://murrays.com/products/hobie-16-mast-hinge-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3021_Hobie_mast_hinge_kit_21380001.jpg?v=1758311991 HOBIE 16 MAST HINGE KIT H16 Mast Hinge Kit Murrays Part# 001-3021 The Hobie 16 Mast Hinge Kit by Murrays aids in raising and lowering the mast of a Hobie® 16. Complete heavy duty hinge assembly includes special pins with retainers to prevent loss. This hinge requires complete removal before sailing. Note: This kit does not fit the newer style Hobie 16s, does not work on post 1993 Hobie 16s with the extreme mast rake, or on older boats with an updated mast step. 21380001 https://murrays.com/products/hobie-18-line-package 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/The_Murrays_Hobie_18_line_package_contains_all_the_lines_on_a_Hobie_18.jpg?v=1732294055 H-18 LINE PACKAGE The Murrays Hobie 18 line package contains all the lines on a Hobie 18. We use Mainly Robline Neptune 500 for the sheets and Pelican VLS, Very Low Stretch, for the control lines. Main Sheet Jib Sheet Daggerboard Handles Outhaul Downhaul Mast Rotation Main Halyard Trampoline Lacing Lines Trapeze Adjustment Line Batten Ties Roller Furline line Jib Halyard Jib Luff Tension Line https://murrays.com/products/hobie-18-trapeze-shock-cord-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0129.jpg?v=1676949950 H-18 TRAP SHOCK CORD (4) The Hobie 18 Trapeze Shock Cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. On this kit for Hobie® 18, one hook connects to either the thimble on the trapeze wire or the adjustment line, then runs through the hull fairlead and through the eyestrap under the lip of the hull near the bow or stern for crew and skipper trapeze lines respectively. The 3/16" shock cord stretches more and slides through ferrules better than larger diameter shock cord. Includes four https://murrays.com/products/hobie-aussie-halyard-ring 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie_Aussie_Halyard_Ring_3064.jpg?v=1751474781 HOBIE AUSSIE HALYARD RING Hobie Aussie Halyard Ring Murrays Part# 007-3064 If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Murrays Aussie Ring (#01-4216). Hobie® Part# 3064 https://murrays.com/products/hobie-18-and-21sc-shroud-5-32-black-roller-swaged 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_b6415359-e0e4-4df4-ae53-a9804c790b95.jpg?v=1676949952 H-18/21 SC SHROUD 5/32" ROLLER SWAGED Hobie 18 shroud - side stay - Hobie part number 6079001 white and 60792001 black https://murrays.com/products/hobie-croakies-glasses-retainers 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1553CR.jpg?v=1676949954 HOBIE CROAKIES GLASSES RETAINERS https://murrays.com/products/hobie-baby-bob-mast-float 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30115_2_z208.jpg?v=1726077064 MAST FLOAT WAVE BABY BOB The Hobie Baby Bob Mast Float is designed to offer the safety and security of mast head flotation with minimized drag through the air, the Baby Bob is fixed in position to the mast head with the included mounting hardware. The Baby Bob is standard on all Hobie Waves This float will also fit the Getaway and Hobie 16 with or without CompTip. Some drilling may be necessary. The larger Mama Bob (#07-30119) is also an option for most Hobies. The Baby Bob Mast Float displaces 32 pounds of water, is 20" long x 1 https://murrays.com/products/hobie-cat-mast-cleat 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/11-6481-_Hobie_mast_cleat.jpg?v=1777048169 MAST CLEAT Mast Cleat Murrays Part# 011-6481 The Mast Cleat is a can be used as a downhaul / halyard cleat on a Hobie 14 and or 16. Compare to Hobie Cat® factory item #10730000. 31mm Center to Center. https://murrays.com/products/hobie-deluxe-sail-bag 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-3121-Deluxe-Hobie-Bag-1.jpg?v=1676949956 HOBIE DELUXE SAIL BAG Hobie Deluxe Sail Bag https://murrays.com/products/hobie-jib-track-end-stop 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0366.webp?v=1757432550 RONSTAN JIB TRACK END CAP https://murrays.com/products/hobie-mama-bob-universal-mast-float-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-30112.jpg?v=1676949960 MAST FLOAT UNIVERSAL MAMA BOB UNIVERSAL MAMA BOB MAST FLOAT The Hobie Mama Bob Universal Mast Float Kit aids in preventing your boat from going full turtle (mast straight down) when capsized, helping to prevent damage to your rig and sails should they contact the bottom. This model (Hobie® Cat #30112) is mast-side mounted system. The Universal Mama Bob float has been adapted for use as a shaft-mounted "universal" mast float that does not rotate, but is held in a fore-aft position in alignment with the mast for minimum drag while https://murrays.com/products/hobie-main-halyard-hook-for-the-hobie-14-hobie-16-wave-getaway 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3330.jpg?v=1676949961 H-14/16 MAIN HALYARD HOOK H14/16 Main Halyard Hook Murrays Part# 25-3330 The main halyard hook is used on the Hobie 14, Hobie 16, Wave, Getaway, Prindles, Sol Cats and Nacras that use a wire halyard. Use two 6-4 rivets (#19-5031) and two casings (#19-5020) for installation. Hobie part# 10680000 Nacra part number 6812 https://murrays.com/products/hobie-rudder-tight-bushing-most-hobies 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2284.jpg?v=1676949965 RUDDER TITE BUSHING EACH Hobie rudder bushing. Hobie part number 8062001 https://murrays.com/products/hobie-wave-club-3-piece-black-mesh-trampoline 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-3100-long.jpg?v=1676949965 WAVE CLUB 3-PIECE MESH TRAMPOLINE-BLACK Wave Club 3-Piece Mesh Trampoline-Black The Murrays Hobie Wave Club 3-Piece Black Mesh Trampoline is not Hobie Class-legal for racing. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Features: A main halyard pocket and hiking straps. Order 43' of 1/4" low-stretch line for lacing (21' for center and two 11' pieces aft). ​Compare to Hobie Part# https://murrays.com/products/hobie-standard-bridle-vane 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/04-7703_2.jpg?v=1676949966 HOBIE STANDARD BRIDLE VANE HOBIE STANDARD BRIDLE VANE Features snap-lock pin and wide indexing support for positive attachment to forestay adjuster. Durable, 7" mylar wind vane freely rotates on 12-1/2" long stainless rod. Wind indicator easily detaches with stainless pull ring. Fits all boats that use a 7- or 10-hole adjuster at the forestay-to-bridle connection. Use adapter #08-1451 to mount it to a Hobie roller furling drum as used on the Hobie Getaway and 18. Hobie item #CM7703. https://murrays.com/products/hook-3-roller-all-metal 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/51VGDa10W5L._AC_SL1001.jpg?v=1738972890 HOOK 3-ROLLER ALL METAL https://murrays.com/products/hobie-wave-getaway-tiller-connection-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/1957_2_z203.jpg?v=1726096068 WAVE/GETAWAY TILLER CONNECTION KIT https://murrays.com/products/hull-cradle-h17-h18-bow-each 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/13-7030.jpg?v=1676949969 HULL CRADLE: BOW Hull Cradle: Bow Murrays Part# 13-7030 https://murrays.com/products/hook-4-roller-all-metal 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-5729.jpg?v=1676949970 HOOK 4-ROLLER ALL METAL Hook 4-Roller All Metal Murrays Part# 27-5729 All-metal block features cast aluminum hook and body with stainless steel roller and shaft. Strong! https://murrays.com/products/hull-cradle-h20-bow-n5-7-stern-tiger-bow 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/13-7020.jpg?v=1676949970 HULL CRADLE: V SHAPED Hull Cradle: V Shaped Murrays Part# 13-7020 https://murrays.com/products/hull-cradle-h20-n5-8-n6-0-tiger-stern-each 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/13-7010.jpg?v=1676949973 HULL CRADLE: UNIVERSAL Hull Cradle: Universal Murrays Part# 13-7010 https://murrays.com/products/hull-cradles-hobie-universal-tiger-pair 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1624-2013.jpg?v=1676949973 HOBIE UNIVERSAL HULL CRADLES Hobie Universal Hull Cradles Murrays Part# 007-1624 Hobie Cat's universal thermoformed cradles are stronger and less likely to scratch than fiberglass. Carpet provides additional hull protection. The unique wide bottom will fit either a round tube or a flat surface and mounting hardware is included. Pair. Dimensions of inside of cradle: Width: 14-1/2" Depth: 4" Width 1" from bottom: 10-1/4" https://murrays.com/products/inter-18-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_d6428286-af38-48e3-9a76-09974acff8f5.jpg?v=1676949974 NACRA INTER 18 BRIDLE 5/32"BLACK WIRE Nacra Inter 18 Bridle 5/32" Black Wire Murrays Part# 002-5315-22 Single black bridle for Inter 18 is constructed of black-coated, 5/32" 1x19 wire to factory specifications. https://murrays.com/products/inter-18-double-trapeze-black-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DoubleTrap_a24c1a05-22c0-44d4-8572-b1ab0f80a11e.jpg?v=1676949974 NACRA INTER 18 DOUBLE TRAPEZE BLACK WIRE (4) Nacra Inter 18 Double Trapeze (4 handles) The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adjustment kit Sailing Harness ​Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140 https://murrays.com/products/inter-18-diamond-wire-without-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireH20Inter.jpg?v=1676949977 NACRA INTER 18 DIAMOND WIRE WITHOUT TURNBUCKLE Inter 18 Diamond Wire without Turnbuckle Murrays Part# 002-5394-20 Diamond wire without turnbuckle for Inter 18 is constructed to factory specifications. Includes both sides. https://murrays.com/products/inter-18-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0244-02A_8abfff1b-e324-49ff-a13d-55ce2c50c673.jpg?v=1676949977 NACRA INTER 18 RF FORESTAY 5/32" BLACK WIRE Nacra Inter 18 Roller Furling Forestay 5/32" Black Wire Murrays Part# 002-5345-92 Forestay for Inter 18 is constructed to 5/32" black-coated wire to factory specifications. https://murrays.com/products/inter-18-shroud-5-32-roller-swaged-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_f6605c66-00e7-4699-a427-d757e1547d79.jpg?v=1676949978 NACRA INTER 18 SHROUD 5/32" BLACK WIRE ROLLER SWAGED Inter 18 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-5305-12 Single black shroud for Inter 18 is hydraulically swaged to be clean and strong. Constructed to factory specifications. https://murrays.com/products/inter-18-jib-halyard 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/inter-20-diamond-wire-without-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireH20Inter_2cc2af5d-77e2-41e2-802f-c34d831fbc4e.jpg?v=1676949980 NACRA INTER 20 DIAMOND WIRE WITHOUT TURNBUCKLE Inter 20 Diamond Wire without Turnbuckle Murrays Part# 002-5494-20 Diamond wire without turnbuckle for Inter 20 is constructed to factory specifications. Includes both sides. https://murrays.com/products/inter-20-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_aca8899b-4c4c-447e-9fc4-d279827c0bde.jpg?v=1676949981 NACRA INTER 20 BRIDLE 5/32" BLACK WIRE Nacra Inter 20 Bridle 5/32" Black Wire Murrays Part# 002-5415-22 Single black bridle for Inter 20 is constructed to factory specifications. You must select the type of jib your boat has so that the bridle's length and fittings will be correct for your boat. https://murrays.com/products/inter-20-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Nacra.jpg?v=1676949982 NACRA INTER 20 FORESTAY 5/32" BLACK WIRE Inter 20 Forestay 5/32" Black Wire Murrays Part# 002-5445-12 Forestay for Inter 20 (without roller furling jib) is constructed of 5/32" black-coated wire to factory specifications. https://murrays.com/products/inter-20-jib-halyard-wire 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0786-00_f5d351cb-96f9-4de9-a90b-73e6be8570fd.jpg?v=1676949984 INTER 20 JIB HALYARD WIRE Inter 20 Jib Halyard Wire Murrays Part# 002-5483-80 Jib halyard wire for Inter 20 is constructed to factory specifications. https://murrays.com/products/inter-20-rf-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0445-32_b477d4ab-0797-4374-842f-6f6a57254f59.jpg?v=1676949985 INTER 20 ROLLER FURLING FORESTAY 5/32" BLACK WIRE Inter 20 Roller Furling Forestay 5/32" Black Wire Murrays Part# 002-5445-32 Forestay for Inter 20 with roller furling jib is constructed of 5/32" black-coated wire to factory specifications. https://murrays.com/products/inter-nacra-f17-bridle-1-8-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/pull-to-pull-fittings.jpg?v=1676949985 NACRA INTER 17 BRIDLE 1/8" BLACK WIRE Nacra Inter 17 Bridle 1/8" Black Wire Murrays Part# 002-5214-12 https://murrays.com/products/inter-20-shroud-5-32-black-roller-swaged 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_c8c00cd4-8306-413a-aec6-e934474c7a77.jpg?v=1676949985 INTER 20 SHROUD 5/32"BLACK WIRE ROLLER SWAGED Inter 20 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-5405-12 Single black shroud for Inter 20 is hydraulically swaged to be clean and strong. Constructed to factory specifications. https://murrays.com/products/inter-nacra-f17-diamond-wire-without-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireH20Inter_c9387078-8a03-4205-8f21-9d2373e18c28.jpg?v=1676949988 INTER F17 DIAMOND WIRE WITHOUT TURNBUCKLE Inter F17 Diamond Wire without Turnbuckle Murrays Part# 002-5294-20 Set of diamond wires for both sides is a continuous wire with one thimble at the bottom. No turnbuckle. Constructed to factory specifications. https://murrays.com/products/inter-nacra-f17-forestay-1-8-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_BK_957661eb-6234-4f8c-919d-70c66c2eaf89.jpg?v=1676949989 NACRA INTER 17 FORESTAY 1/8" BLACK WIRE Nacra Inter 17 Forestay 1/8" Black Murrays Part# 002-5244-02 Because the manufacturer's specifications vary, a pull-to-pull length is required to ensure correct length for your boat. https://murrays.com/products/jib-clew-pigtail-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-4015.jpg?v=1676949989 JIB CLEW PIGTAIL KIT Jib Clew Pigtail Kit Murrays Part# 001-4015 Easy-connect Dyneema® jib clew pigtail. Speed up tacks and improve sail shape by moving jib clew blocks away from the jib clew. Color may vary from picture. Features: jib Clew Pigtails move jib clew blocks about 14" from jib clew— saves 4 feet of sheeting/unsheeting per tack! "Locked" eye splices— jib blocks cannot slip or un-tie. Save weight (only 2.4oz) and move weight away from jib clew— better sail shape in light wind. Lightweight, easy-connect— https://murrays.com/products/inter-nacra-f17-trapeze-wires-black-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/SingleTrap_386ae5c3-2231-4ec6-a4f3-0a7f585a2c4b.jpg?v=1676949989 NACRA INTER 17 TRAPEZE BLACK WIRES (2) Nacra Inter 17 Trapeze Black Wires (2 Handles) Murrays Part# 002-5253-02 The Nacra Inter F17 Trapeze Wires Black (2) basic assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order shock cord and adjustment kits separately. A trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) may be added to wire with no installation charge! Check box when ordering and wire length will be adjusted accordingly. https://murrays.com/products/jib-halyard-with-sister-clips-h18-h20 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/04-7732.jpg?v=1676949992 H-18/20 JIB HALYARD WITH CLIP https://murrays.com/products/jib-snorkel-getaway 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1815.jpg?v=1676949993 GETAWAY JIB SNORKEL https://murrays.com/products/jib-traveler-cars-for-integrated-track 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/012-3021_Hobie_16_jib_traveler_cars.jpg?v=1775597350 JIB TRAVELER CARS INTEGRATED TRACK Hobie 16 Jib Traveler Cars Integrated The Tren Tec jib traveler cars fit the Hobie 16 integrated jib track which is extruded into the crossbar, as opposed to the external track which is riveted to the crossbar. The integrated track was standard on post-1997 Hobie® 16's. The black plastic cars have four holes and slide freely in the track. Low profile shape saves needed space when mast is raked to the extreme. Sold as a pair Hobie Cat® uses Part# 1553 for this item https://murrays.com/products/jib-traveler-cars-for-original-track 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/012-3020.jpg?v=1775597435 JIB TRAVELER CARS EXTERNAL TRACK Hobie 16 Jib Traveler Cars for External Track Tren Tec's black plastic cars have four holes and slide freely in the track. Low profile shape saves needed space when mast is raked to the extreme. For 1996 and earlier Hobie 16s with external track that is riveted to the front crossbar. Sold in pairs Hobie uses Part# 1552 for this item. https://murrays.com/products/jib-halyard-with-sister-clips-prindle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/04-7734.jpg?v=1676949997 PRINDLE JIB HALYARD WITH SISTER CLIPS https://murrays.com/products/jib-traveler-control-kit-fixed-cam 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3112.jpg?v=1676949997 JIB TRAVELER CONTROL KIT: FIXED CAM Jib Traveler Control Kit: Fixed Cam Murrays Part# 001-3112 A jib traveler system allows remote adjustment of the jib cars. This dramatically increases downwind speed and may help avoid a pitchpole caused by your crew moving leeward to make an adjustment by hand. https://murrays.com/products/key-ball-connectors-original-bethwaite 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1212.jpg?v=1676949997 KEY-BALL CONNECTOR https://murrays.com/products/key-ball-cant-miss-connectors 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0142.jpg?v=1676949997 KEY-BALL CAN'T MISS CONNECTOR Key-Ball Can't Miss Connector  Murrays Part# 001-0142 Can't Miss handles are designed to allow the sailor to hook-up without even looking at the trapeze hook. This lightweight, extra-wide hook-up ring has a center-hold handle with molded finger ridges. Double swaged 1/8" (1x19) wire is color-coated with high pressure nylon tubing. Use this pair of connectors with Carbon Key-Hole Buckle (#01-0311), sold separately. https://murrays.com/products/key-ball-cant-hurt-connectors 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1213.jpg?v=1676950001 KEY-BALL CAN'T HURT CONNECTOR Key-Ball Can't Hurt Connectors Murrays Part# 001-1213 This pair of connectors is designed for use with the carbon Key-Hole buckle #01-0311. Can't Hurt rings are a light and flexible alternative to "hard" stainless steel dogbones. Black high pressure nylon tubing covers 1/8" (1x19) stainless wire. https://murrays.com/products/kisme-kleet-package-of-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-1010.jpg?v=1676950001 KISME KLEET (4) Kisme Kleet (4) Murrays Part# 005-1010 https://murrays.com/products/kisme-it-traveler-cars 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/05-0200.jpg?v=1743544106 KISME "IT" TRAVELER CAR (PR) https://murrays.com/products/kisme-ok-car-only 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0400.jpg?v=1676950005 OXEN BLOCK "OK" CAR ONLY (EA) Kisme "OK" Car Only Murrays Part# 005-0400 H16 Jib car upgrade kit. Stainless construction with remote traveler control attachment points and low profile jib sheet becket attachment. Purchase the H16 Traveler control kit to upgrade your vintage jib car and sheeting system. Sold Individually https://murrays.com/products/lido-14-forestay-3-32-white 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-5143-91.jpg?v=1676950005 LIDO 14 FORESTAY 3/32" WHITE WIRE Lido 14 Forestay 3/32" White Murrays Part# 002-5143-91 Forestay for Lido 14 is constructed of 3/32" white-coated wire to factory specifications. https://murrays.com/products/large-fairlead-1-7-16-x-5-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-1065_1c7f1173-d7b3-4e12-ae70-745456417dbc.jpg?v=1676950005 LARGE FAIRLEAD: 1-7/16 X 5/8" Large Fairlead: 1-7/16 X 5/8" Murrays Part# 25-1065 Large stainless steel fairlead is used on Hobie® rear crossbar. Measurements: A = 1-7/16" (36.5mm) B = 5/8" (16mm) C = 3/16" (5mm) Use two 6-4 rivets (#19-5031) for installation. https://murrays.com/products/lido-14-shroud-3-32-white 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-5143-91_c76e97df-2605-414d-9b01-f106b411de8f.jpg?v=1676950009 LIDO 14 SHROUD 3/32" WHITE WIRE Lido 14 Shroud 3/32" White Wire Murrays Part# 002-5103-91 Single white shroud for Lido 14 is constructed to factory length. https://murrays.com/products/lock-nut-5-16-x-24-right-hand 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1056-1.jpg?v=1676950010 LOCK NUT 5/16X24 RH Lock Nut 1/4 X 28 Murrays Part# 002-1047-1 Tubular turnbuckle lock nut. Right hand thread. https://murrays.com/products/marine-eye-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1054_2.jpg?v=1676950013 MARINE EYE 3/32" (SS) https://murrays.com/products/m8-t-nuts-stainless-steel-hydrofoil-mast-track-inserts 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/M8-track-insert.jpg?v=1676950013 STAINLESS STEEL M8 T-NUTS The heavy duty 8mm Hydrofoil T-Nuts (Stainless Steel) are rectangular M8 channel inserts/T-Nuts. Designed for use in hydrofoil mast tracks.  Stainless steal inserts are an upgrade to the standard Brass inserts.  Great for salt water environments, they resist corrosion. Compatable with all Liquid Force, Lift, Slingshot, FoilMount (stainless only), etc track systems. Specs: M8 standard metric threads which is standard for all hydrofoil tracks. M8 t-nuts also work in windsurfing mast tracks as well https://murrays.com/products/mast-bearing-kit-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-4045.jpg?v=1676950015 HOBIE 18 MAST BEARING KIT Murrays Part# 001-4045 Hobie 18 Mast Bearing Kit enables smooth mast rotation on the Hobie® 18. The kit includes a new mast bearing, stainless steel washers and Teflon washer. To mount, use one #19-3019 screw (included) for post-1990 Hobie 18 or one #19-3020 screw (sold separately) for pre-1990 Hobie 18. Compare to Hobie Cat® #1132 (bearing 60110000 and Teflon™ washer). https://murrays.com/products/marine-fork-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1055_2.jpg?v=1676950015 MARINE FORK 3/32" (SS) https://murrays.com/products/mast-bearings-hobie-14-hobie-16-package-of-100 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2042.jpg?v=1676950017 H14/16 MAST BEARING (100-PKG) H14/16 Mast Bearing (Pack of 100) Murrays Part# 001-2042 Teflon® mast bearings for Hobie® 14 or 16 are .06" thick and will form to mast base with first use. Package of 100 mast chips. https://murrays.com/products/mast-float-mama-bob-getaway 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-30119.jpg?v=1676950017 MAST FLOAT MAMA GETAWAY Mast Float Mama Getaway Murrays Part# 007-30119 https://murrays.com/products/mast-hinge-h16-only 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3360.jpg?v=1676950019 H-16 (ONLY) MAST HINGE Mast Hinge H-16 (Only) Murrays Part# 25-3360 Heavy duty mast base hinge for Hobie® 16 only (does not fit Hobie 14). Clevis pins are sold separately. NOTE: This kit does not fit the newer style Hobie 16s, does not work on post 1993 Hobie 16s with the extreme mast rake, or on older boats with an updated mast step. The way to tell is if your mast step has a horizontal mast base then it is old style, new style has a slant toward the stern. https://murrays.com/products/mast-float-attachment-h14-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-30116.jpg?v=1676950019 H-14/16 MAST FLOAT ATTACHMENT KIT Mast Float Attachment Kit: H14/16 Murrays Part# 007-30116 This attachment kit for Hobie® 14 or 16 comes with Hobie® Mama and Baby Bobs, but is also offered separately here. https://murrays.com/products/mast-protector-5-aluminum 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-9503.jpg?v=1676950021 5" ALUMINUM MAST PROTECTOR Mast Protector 5" (Aluminum) Murrays Part# 001-9503 Spread the load over a broad section of mast. 5" aluminum protector is for tight-fitting boom ends. May be required to uphold mast warranty. Limited to stock on hand. https://murrays.com/products/maxi-rigg-tool 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0015.jpg?v=1676950023 MAXI RIGG TOOL Murrays Part# 001-0015 Need a little help? Use the Maxi Rigg tool to hand-hold spinnaker sheets or pull anchor lines up to 1/2" diameter with minimum strain on hands or grip. Hold and control spinnaker sheets. Unique safety swivel allows for easy and safe release of lines in case of sudden or too much pull. You can also use two to pull anchor lines hand-over-hand. Assorted colors available Line size: 5/16" to 1/2" Hobie Cat® uses item #2069 for the Maxi Rigg Tool. https://murrays.com/products/mast-step-system-nacra 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-8002_2_Nacra_mast_step-base-rod.jpg?v=1768324043 NACRA MAST STEP SYSTEM Nacra mast step system-mast base-Nacra mast support rod-Nacra mast ball-Nacra mast Sopport Pad https://murrays.com/products/mini-cam-kit-for-elliptical-surface 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0112.jpg?v=1676950026 MINI CAM KIT FOR ELLIPTICAL SURFACE Mini Cam Kit for Elliptical Surface Murrays Part# 001-0112 Mount a mini cam cleat, in any orientation, on almost any elliptical surface. Fits most elliptical surfaces: Hobie®, Nacra, Prindle masts and most others; Hobie and Prindle main beams, etc. You drill holes in the pad to suit your desired line/cleat orientation. https://murrays.com/products/mini-fairlead-1-x-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-0338.jpg?v=1676950027 RONSTAN MINI FAIRLEAD: 1 X 1/4 Mini Fairlead: 1 X 1/4 Murrays Part# 25-0338 Stainless mini fairlead strap measurements: A = 1 1/8" between holes center-to-center B = 3/8" height C = 3/16" hole diameter Compare to Hobie Part 11470000 Rear Crossbar Padeye https://murrays.com/products/murrays-harken-57mm-carbo-6-1-mainsheet-system 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/6to1hobiemainsheetsystem.jpg?v=1760743377 HARKEN 57MM CARBO 6:1 MAINSHEET SYSTEM https://murrays.com/products/murrays-retro-t-shirt-navy 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-00-Murrays-Retro-Tee.jpg?v=1676950029 MURRAYS RETRO TEE Murray's Retro Tee Show off your Murrays pride with this Retro Murrays cotton T-Shirt. We brought this design back from the archives to enjoy for every generation. These shirts are super comfy cotton blend and a must-have for any regatta. Don't be caught without one! https://murrays.com/products/mylar-sail-repair-tape-clear-2x10 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-3410-2013.jpg?v=1676950030 MYLAR 2x10" SAIL REPAIR TAPE-CLEAR Mylar Sail Repair Tape 2x10"- Clear Murrays Part# 010-3410 Make quick and easy sail repairs with Bainbridge's 10' roll of 2"-wide clear mylar polyester film with pressure-sensitive adhesive. https://murrays.com/products/n5-0-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_cb602cdf-0ac0-4da5-ad91-49804012ffde.jpg?v=1676950031 N-5.0 BRIDLE 5/32- BLACK https://murrays.com/products/n5-0-diamond-wire-with-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireNacPrin.jpg?v=1676950032 N-5.0 DIAMOND WIRE WITH TURNBUCKLE N5.0 Diamond Wire with Turnbuckle Murrays Part# 002-4194-20 Diamond wire with turnbuckle for Nacra 5.0 is constructed to factory specifications. https://murrays.com/products/n5-0-shroud-5-32-black-roller-swaged 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_46abfbad-3f4b-4c67-83cb-35cf41326c55.jpg?v=1676950035 N-5.0 SHROUD 5/32" BLACK WIRE ROLLER SWAGED N5.0 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4105-12 Single black shroud for Nacra 5.0 is constructed of 5/32" wire and is hydraulically swaged to be clean and strong. Constructed to factory specifications. https://murrays.com/products/n5-0-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_656c07ec-0344-42dc-924d-913f5ff45914.jpg?v=1676950036 N-5.0 FORESTAY 5/32" BLACK WIRE N5.0 Forestay 5/32" Black Wire Murrays Part# 002-4145-12 Black forestay for Nacra 5.0 is constructed to factory specifications. https://murrays.com/products/n5-2-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_c8690486-7efb-4bb2-bfca-8f3bf4782aa6.jpg?v=1676950039 N-5.2 BRIDLE 5/32 BLACK WIRE https://murrays.com/products/n5-2-diamond-wire-with-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-4294-20.jpg?v=1676950040 N-5.2 DIAMOND WIRE WITH TURNBUCKLE N5.2 Diamond Wire with Turnbuckle Murrays Part# 002-4294-20 Diamond wire with turnbuckle for Nacra 5.2 is constructed to factory specifications. https://murrays.com/products/n5-2-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_86bed12c-cbda-4df9-869c-72f3a96bc20a.jpg?v=1676950043 N-5.2 FORESTAY 5/32" BLACK WIRE N5.2 Forestay 5/32" Black Wire Murrays Part# 002-4245-12 Forestay for Nacra 5.2 is constructed to factory specifications with 5/32" black-coated wire. https://murrays.com/products/n5-2-shroud-5-32-black-roller-swaged 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_0c6ed670-cf9e-48f6-8b7f-a44ecd940b6d.jpg?v=1676950044 N-5.2 SHROUD 5/32" BLACK WIRE ROLLER SWAGED N5.2 Shroud 5/32" Roller Swaged Murrays Part# 002-4205-12  Single black shroud for Nacra 5.2 is hydraulically swaged to be clean and strong. Constructed to factory specifications. Compare to Nacra product #9536 https://murrays.com/products/n5-5sl-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_c1ee1f2a-e241-468d-b870-929c920a2bc7.jpg?v=1676950047 N-5.5SL BRIDLE 5/32-BLACK WIRE https://murrays.com/products/n5-5sl-diamond-wire-with-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireNacPrin_5ce81e0d-7230-46b4-9d9d-9a00cde34536.jpg?v=1676950048 N-5.5SL DIAMOND WIRE WITH TURNBUCKLE N5.5SL Diamond Wire with Turnbuckle Murrays Part# 002-4394-20 Diamond wire with turnbuckle for Nacra 5.5SL is constructed to factory specifications. https://murrays.com/products/n5-5sl-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Nacra_7e0eaf42-6d5a-4d8f-9163-c9cd39e80b7e.jpg?v=1676950049 N-5.5SL FORESTAY 5/32" BLACK WIRE N5.5SL Forestay 5/32" Black Wire  Murrays Part# 002-4345-12 Forestay for Nacra 5.5SL is constructed to factory specifications from 5/32" black-coated wire. https://murrays.com/products/n5-5sl-jib-block-wire 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/n5-7-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2415-22.jpg?v=1676950052 N-5.7 BRIDLE 5/32 BLACK WIRE https://murrays.com/products/n5-5sl-n5-7-shroud-5-32-black-roller-swaged 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_4de9e966-8997-47cd-ad48-aa8141c9e688.jpg?v=1676950052 N-5.5SL/5.7 SHROUD 5/32" BLACK WIRE ROLLER SWAGED N5.5SL, N5.7 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4305-12 Single black shroud for Nacra 5.5SL and 5.7 is hydraulically swaged to be clean and strong. Constructed to factory specifications. https://murrays.com/products/n5-7-diamond-wire-with-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireNacPrin_33a55344-84c4-41c9-b33f-75d2cb18dea0.jpg?v=1676950053 N-5.7 DIAMOND WIRE WITH TURNBUCKLE N5.7 Diamond Wire with Turnbuckle Murrays Part# 002-4494-20 Diamond wire with turnbuckle for Nacra 5.7 is constructed to factory specifications. https://murrays.com/products/n5-7-forestay-5-32-black-roller-swaged 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Thimble-MarineEye.jpg?v=1676950056 N-5.7 FORESTAY 5/32" BLACK WIRE ROLLER SWAGED N-5.7 Forestay 5/32" Black Wire Roller Swaged Murrays Part# 002-4445-12 Forestay for Nacra 5.7 is constructed to factory specifications from 5/32" black-coated wire with hydraulically swaged fittings. https://murrays.com/products/n5-7-main-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N5.0-5.2-5.7-5.5SL-main-halyard-with-shackle-and-stop.jpg?v=1676950056 N-5.7 MAIN HALYARD W/SHACKLE https://murrays.com/products/n5-8-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_2c6a2830-8b22-495c-953d-7bfa48417157.jpg?v=1676950057 N-5.8 BRIDLE 5/32 BK https://murrays.com/products/n5-8-diamond-wire-with-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireNacPrin_84e34f3c-511a-465b-8e8c-a2f404c9082c.jpg?v=1676950057 N-5.8 DIAMOND WIRE WITH TURNBUCKLE https://murrays.com/products/n5-8-jib-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N-5.7-5.5SL-5.8-jib-halyard-with-shackle-and-pully-with-becket.jpg?v=1676950060 N-5.8 JIB HALYARD W/SHACKLE https://murrays.com/products/n5-8-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Nacra_2390f028-dc49-42f6-9382-0eab237afe5e.jpg?v=1676950060 N-5.8 FORESTAY 5/32" BLACK WIRE N5.8 Forestay 5/32" Black Wire Murrays Part# 002-4545-12 The Nacra 5.8 forestay is constructed to factory specifications from 5/32" black-coated wire. Their are 2 versions of the Nacra 5.8. The standard 5.8 which is mostly found in Europe and N.A. which is the North American version. The N.A. has a longer forestay that connects to a bridle foil rod instead of bridle wires. https://murrays.com/products/main-halyard-ring-murrays 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-4216.jpg?v=1715122072 MAIN HALYARD RING (MURRAYS) Main Halyard Ring (Murrays) Murrays Part# 001-4216 If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Hobie Aussie Ring (#07-3064). This item replaces discontinued Part https://murrays.com/products/n5-8-shroud-5-32-black-roller-swaged 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_44ed84f2-41ba-4983-b74c-c3d1122a7d54.jpg?v=1676950064 N-5.8 SHROUD 5/32" BLACK WIRE ROLLER SWAGED N5.8 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4505-12 Single black shroud for Nacra 5.8 is hydraulically swaged to be clean and strong. Constructed to factory specifications. https://murrays.com/products/n6-0-diamond-wire-with-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireNacPrin_4574f6cd-2ed0-4dc3-b11f-97855f1c8efd.jpg?v=1676950064 N-6.0 DIAMOND WIRE WITH TURNBUCKLE N6.0 Diamond Wire with Turnbuckle Murrays Part# 002-4694-20 Diamond wire with turnbuckle for Nacra 6.0 is constructed to factory specifications. https://murrays.com/products/n6-0-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/BridleRS_1d878054-c73d-48d1-ade8-452e89dc666e.jpg?v=1676950064 N-6.0 BRIDLE 5/32 BLACK WIRE https://murrays.com/products/n6-0-shroud-5-32-black-roller-swaged 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_1a2bf6d5-661f-442b-87c4-878d51fe56ee.jpg?v=1676950068 N-6.0 SHROUD 5/32" BLACK WIRE ROLLER SWAGED N6.0 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4605-12 Single black shroud for Nacra 6.0 is hydraulically swaged to be clean and strong. Constructed to factory specifications. Length: 22' 5-1/4" pull-to-pull. To help differentiate between the standard Nacra 6.0 and Nacra 6.0 NA (North American), please note that the standard Nacra 6.0 came stock with a shorter mast and without a bridle foil. The Nacra 6.0 NA came stock with a longer mast and had a bridle foil. https://murrays.com/products/n6-0-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Nacra_7c57659c-74de-4a4b-b17b-e33d3c52386f.jpg?v=1676950068 N-6.0 FORESTAY 5/32" BLACK WIRE N6.0 Forestay 5/32" Black Wire Murrays Part# 002-4645-12 Forestay for Nacra 6.0 is constructed of black-coated 5/32" wire to factory specifications. https://murrays.com/products/n6-0-n6-0na-jib-block-wire 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/mast-bearings-hobie-14-hobie-16-package-of-3 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-2041_Hobie_16_mast_bearing.jpg?v=1736459230 H-14/16 MAST BEARING (3-PKG) Hobie 16 mast bearings. Teflon mast chips, Hobie part number 11110005 https://murrays.com/products/n6-0na-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-5415-22.jpg?v=1676950070 N-6.0NA BRIDLE 5/32-BLACK WIRE https://murrays.com/products/n6-0na-diamond-wire-short 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/n6-0na-diamond-wire-long 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireNacPrin_0097c493-f727-4d64-9b5d-42a78d4eb927.jpg?v=1676950072 N-6.0NA DIAMOND WIRE LONG N6.0 North American Diamond Wire Long Murrays Part# 002-4794-20 Lower diamond wire with turnbuckle and roller for Nacra 6.0 NA (North American) is constructed to factory specifications. https://murrays.com/products/n6-0na-forestay-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Nacra_18153025-4791-48a7-af2f-c33aafc3841b.jpg?v=1676950073 N-6.0NA FORESTAY 5/32" BLACK WIRE https://murrays.com/products/nacra-5-0-jib-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N5.0-5.2-jib-halyard-with-shackle-and-pulley.jpg?v=1676950075 N-5.0 JIB HALYARD W/SHACKLE https://murrays.com/products/n6-0na-shroud-5-32-black-roller-swaged 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_6bfd87b1-1d4f-4f77-8cd1-f33d5b93a3c1.jpg?v=1676950076 N-6.0NA SHROUD 5/32" BLACK WIRE ROLLER SWAGED N6.0 North American Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-4705-12 Single black shroud for Nacra 6.0NA (North American) is hydraulically swaged to be clean and strong. Constructed to factory specifications. Length: 24' 4" pull-to-pull. To help differentiate between the standard Nacra 6.0 and Nacra 6.0 NA, please note that the standard Nacra 6.0 came stock with a shorter mast and without a bridle foil. The Nacra 6.0 NA came stock with a longer mast and included a bridle foil. https://murrays.com/products/nacra-5-2-jib-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N5.0-5.2-jib-halyard-with-shackle-and-pulley_dd593592-bc8c-478b-92f7-b19678fd8130.jpg?v=1676950077 N-5.2 JIB HALYARD WITH SHACKLE https://murrays.com/products/nacra-5-0-main-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N5.0-5.2-5.7-5.5SL-main-halyard-with-shackle-and-stop_538989e1-0349-46a1-a0fb-93565358d6bc.jpg?v=1676950077 N-5.0 MAIN HALYARD WITH SHACKLE https://murrays.com/products/nacra-5-2-main-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N5.0-5.2-5.7-5.5SL-main-halyard-with-shackle-and-stop_7b72fbac-6fa3-4512-9a34-1efcd191e132.jpg?v=1676950079 N-5.2 MAIN HALYARD WITH SHACKLE https://murrays.com/products/nacra-5-5sl-jib-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N-5.7-5.5SL-5.8-jib-halyard-with-shackle-and-pully-with-becket_6ff3d298-8dcd-48a6-84d4-009c9bd2370c.jpg?v=1676950080 N-5.5SL JIB HALYARD WITH SHACKLE https://murrays.com/products/nacra-5-7-jib-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N-5.7-5.5SL-5.8-jib-halyard-with-shackle-and-pully-with-becket_2a4ac14e-09cc-4fa7-9224-3cbe02f5b9ab.jpg?v=1676950081 N-5.7 JIB HALYARD W/SHACKLE https://murrays.com/products/nacra-5-5sl-main-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N5.0-5.2-5.7-5.5SL-main-halyard-with-shackle-and-stop_c5af23e7-1d03-4add-8c3f-0df8db2480e9.jpg?v=1676950082 N-5.5SL MAIN HALYARD WITH SHACKLE https://murrays.com/products/nacra-6-0na-jib-halyard 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/N6.0-6.0-NA-Jib-halyard-with-shackle.jpg?v=1676950083 N-6.0/NA JIB HALYARD https://murrays.com/products/nicopress-oval 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/oval_220e32ec-7c4e-4e7b-9e69-b80ec5f37f31.jpg?v=1733349300 NICOPRESS OVAL 1/16" COPPER/ZINC Nicopress Oval 1/16" Copper/Zinc Murrays Part# 002-1020 Nicopress Oval- Locks wire rope to a thimble terminal. Close with an appropriate swaging tool for maximum strength. Each. https://murrays.com/products/nacra-inter-17-shroud-roller-swaged-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Thimble-MarineEye-PTP.jpg?v=1676950085 NACRA INTER 17 SHROUD 1/8" ROLLER SWAGED Nacra Inter 17 Shroud Roller Swaged Murrays Part# 002-5204-12 Because the manufacturer's specifications vary, a pull-to-pull length is required to ensure correct length for your boat. https://murrays.com/products/nut-hex-ms-6-32-brass 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2010.jpg?v=1734553156 HEX NUT #6-32 (BRASS) Nut Hex MS #6-32 (Brass) Murrays Part# 19-2010 Brass hex nut fits Pocket Protector kits #01-1001 and #01-1002. Measurements are diameter and threads per inch. https://murrays.com/products/nut-hex-ms-8-32-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2016.jpg?v=1734547355 HEX NUT MS #8-32 (SS) Nut Hex MS #8-32 Stainless Steel Murrays Part# 19-2016 Stainless steel #8-32 hex nut. Measurements are diameter and threads per inch. Compare to Hobie Cat® #8050801. https://murrays.com/products/nut-hex-ms-8-32-white-nylon 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2020WH.jpg?v=1676950091 NUT HEX MS #8-32 (WH NYLON) Nut Hex MS #8-32 (White Nylon) Murrays Part# 19-2020WH White nylon #8-32 nut used for installation of ports. https://murrays.com/products/nut-nylock-10-32-stainless-steel-thick 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2515.jpg?v=1676950093 NUT NYLOCK #10-32 (SS) THICK Nut Nylock #10-32 Stainless Steel Thick Murrays Part# 19-2515 Mainsheet block replacement nut. The stainless hex nut with nylock insert will not rust or work loose if properly installed. Fits Hobie Main Traveler Car. Fits Hobie Tiller Hinge Screw. Fits Hobie Masthead Sheave Screw H16 Hobie Getaway Compare to Hobie Part Number 8050201 https://murrays.com/products/nut-nylock-1-4-20-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2520-nylock-nut.jpg?v=1676950093 NYLOCK NUT 1/4-20 SS Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut https://murrays.com/products/nut-nylock-1-2-13-stainless-steel-thin 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/low-profile-nylock-nut.jpg?v=1676950095 NUT NYLOCK 1/2-13 (SS) THIN Nut Nylock 1/2-13" Stainless Steel Thin Murrays Part# 19-2531 Thin stainless steel 1/2-13 hex nut with nylock insert will not rust or work loose if properly installed. Used on 1/2" pylon bolt on most older Hobie 16's (changed to 3/8" in 1994). Equivalent to Hobie #8050631. https://murrays.com/products/nut-nylock-3-8-16-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2524-2.jpg?v=1676950097 NUT NYLOCK 3/8-16" (SS) Nut Nylock 3/8-16" Stainless Steel Murrays Part# 19-2524 Stainless 3/8-16 hex nut with nylock insert will not rust or work loose if properly installed. Used on newer (1994) Hobie 16 pylon bolt. Hobie Part# 8050521 https://murrays.com/products/nut-nylock-5-16-18-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2520-nylock-nut_10fb136c-9c94-4419-ad9a-2537e41f054e.jpg?v=1676950097 NUT NYLOCK 5/16-18 (SS) Nut Nylock 5/16-18 Stainless Steel Murrays Part# 19-2520 5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut Used with Hobie Getaway Bow Tang Bolt https://murrays.com/products/nut-nylock-8mm-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2520-nylock-nut_ff11e9a2-b369-4291-9665-7a636f66670a.jpg?v=1676950098 NUT NYLOCK 8mm (SS) Nut Nylock 8mm Stainless Steel Murrays Part# 19-2522 Stainless hex nut with Nylock insert will not rust or work loose if properly installed. https://murrays.com/products/o-ring-for-4-screw-in-port 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-4210OR_6_inch_port_o_ring.jpg?v=1721231062 O-RING: 4" SCREW-IN PORT O-Ring: 4" Screw-In Port Murrays Part# 001-1161OR This is an approximate O-Ring for Viking Marine 4" ports. https://murrays.com/products/o-ring-for-5-screw-in-port 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/o-ring_4aa4476e-4bb6-4db1-9a41-88426a0be6ee.jpg?v=1721236912 O-RING 5" SCREW-IN O-Ring 5" Screw-In Murrays Part# 001-1171OR This is an approximate replacement for Viking Port O-Rings for 5" ports. https://murrays.com/products/o-ring-for-6-screw-in-port 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-4210OR_6_inch_port_o_ring_21a0552d-598a-41b2-9721-87e60ea87687.jpg?v=1722263119 O-RING: 6" SCREW-IN PORT O-Ring: 6" Screw-In Port Murrays Part# 001-4210OR ​Replacement “O” ring for 6″ port (hatch) #01-4210. Viking, Sea Dog https://murrays.com/products/oxen-becket-clevis-pin-3-16-x-1-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-18.jpg?v=1676950105 OXEN BLOCK BECKET CLEVIS PIN Oxen Block Becket Clevis Pin 3/16 X 1-1/4" Length: 3/16 X 1-1/4 https://murrays.com/products/oxen-becket-mounting-strap 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-14.jpg?v=1676950107 OXEN BLOCK BECKET MOUNTING STRAP Oxen Block Becket Mounting Strap Murrays Part# 005-0761-14 https://murrays.com/products/oxen-becket-strap-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0766.jpg?v=1676950107 OXEN BLOCK BECKET STRAP KIT Oxen Block Becket Strap Kit Murrays Part# 005-0766 https://murrays.com/products/oxen-becket-roller-oxen 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-17.jpg?v=1676950109 OXEN BLOCK BECKET ROLLER Oxen Block Roller Becket Murrays Part# 005-0761-17 https://murrays.com/products/oxen-block-3-with-pin 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/oxen_block.jpg?v=1736268490 OXEN BLOCK WITH PIN - CLEATING BLOCK Oxen blocks are the ultimate high tech, self-holding jib blocks that offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use. Expensive, but the best is rarely cheap! https://murrays.com/products/oxen-block-3-with-pin-becket 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/OXEN_3_BLOCK_W_PIN_amp_BECKET.jpg?v=1736269034 3" OXEN BLOCK WITH PIN & BECKET Oxen self-holding blocks offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use. https://murrays.com/products/oxen-becket-strap-seal 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-becket_breakdown.jpg?v=1676950111 OXEN BLOCK BECKET SEAL STRAP Oxen Block Becket Seal Strap Murrays Part# 005-0761-19 https://murrays.com/products/oxen-face-plate 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-0761-08.jpg?v=1676950113 OXEN BLOCK FACE PLATE Oxen Face Plate Murrays Part# 005-0761-08 REBUILDING OXEN BLOCKS Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. We regret that our technician is not available to answer rebuilding questions. https://murrays.com/products/oxen-hub-center-screw-2-piece 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-01.jpg?v=1676950115 OXEN BLOCK HUB CENTER SCREW (2-PC) REBUILDING OXEN BLOCKS Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. We regret that our technician is not available to answer rebuilding questions. The following information is provided so that you can make an informed decision about the re https://murrays.com/products/oxen-c-clip 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-11.jpg?v=1676950115 OXEN BLOCK C CLIP Oxen C Clip 005-0761-11 REBUILDING OXEN BLOCKS Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. We regret that our technician is not available to answer rebuilding questions. https://murrays.com/products/oxen-inner-hub-assembly 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-07.jpg?v=1676950118 OXEN BLOCK INNER HUB ASSEMBLY Oxen Block Inner Hub Assembly Murrays Part# 005-0761-07 https://murrays.com/products/oxen-o-ring-seal-center-screw 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-02.jpg?v=1676950119 OXEN BLOCK O-RING SEAL(CENTER SCREW) O-Ring Seal (Center Screw) Murrays Part# 005-0761-02 REBUILDING OXEN BLOCKS Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. https://murrays.com/products/oxen-outer-hub-lock-ring 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-06.jpg?v=1676950119 OXEN BLOCK OUTER HUB LOCK RING Oxen Outer Hub Lock Ring Murrays Part# 005-0761-06 https://murrays.com/products/oxen-o-ring-for-face-plate 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-05.jpg?v=1676950121 OXEN BLOCK O-RING FACE PLATE Oxen Block O-Ring Face Place Murrays Part# 005-0761-05 https://murrays.com/products/oxen-sheave-main-body 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-04.jpg?v=1676950123 OXEN BLOCK MAIN BODY SHEAVE Sheave Main Body Murrays Part# 005-0761-04 REBUILDING OXEN BLOCKS Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed. https://murrays.com/products/oxen-sheave-self-locking 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-00.jpg?v=1676950123 OXEN BLOCK SELF-LOCKING SHEAVE Oxen Sheave Self-Locking Murrays Part# 005-0761-00 https://murrays.com/products/oxen-teflon-washer 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-13.jpg?v=1676950125 OXEN BLOCK TEFLON WASHER Oxen Block Teflon Washer Murrays Part# 005-0761-13 https://murrays.com/products/oxen-v-ring-seal-hub 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-03.jpg?v=1676950127 OXEN BLOCK V-RING SEAL HUB V-Ring Seal Hub Murrays Part# 005-0761-03 https://murrays.com/products/oxen-spring-trip-lever-return 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0761-becket_breakdown-1.jpg?v=1676950127 OXEN SPRING TRIP LEVER RETURN https://murrays.com/products/p16-main-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Prindle_16_main_halyard_wire.jpg?v=1733169834 PRINDLE 16 MAIN HALYARD WITH SHACKLE The Murrays Prindle 16 main halyard is made to factory specs. We use 316 stainless steal bare wire and thimbles. It also has a Ronstan Halyard Shackle with a captive pin so that it will not fall out when loosened. Prindle part number 9026 https://murrays.com/products/p16-trapeze-wires-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/PRIONDLE_16_Single_TRAPEZE_WIRE.jpg?v=1733249447 PRINDLE 16 TRAPEZE WIRES (2) The Murrays Prindle Trapeze Wires are a set of 2 black or white coated trap wires with 2 handles for trapezing. Order shock cord, harness loops and adjustment kits separately. https://murrays.com/products/p16-upper-forestay-1-8-bare 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2234-00.jpg?v=1676950135 PRINDLE 16 UPPER FORESTAY 1/8" BARE WIRE P16 Upper Forestay 1/8" Bare Wire Murrays Part# 002-2234-00 Upper forestay for Prindle 16 is constructed of bare 1/8" wire to factory specifications. https://murrays.com/products/p16-p18-jib-block-wire 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2224-00.jpg?v=1676950135 PRINDLE 16/18 JIB BLOCK WIRE Prindle 16, P18 Jib Block Wire Murrays Part# 002-2224-00 Jib block wire for Prindle 16 or 18 is constructed to factory specifications. A swaging tool is needed for installation. https://murrays.com/products/p18-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2315-02.jpg?v=1676950139 PRINDLE 18 BRIDLE 5/32" BLACK WIRE P18 Bridle 5/32" Black Murrays Part# 002-2315-02 One black bridle for Prindle 18 is constructed to factory specifications. https://murrays.com/products/p18-upper-forestay-5-32-bare 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2335-00.jpg?v=1676950139 PRINDLE 18 UPPER FORESTAY 5/32 BARE https://murrays.com/products/p18-forestay-5-32-black-with-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Prindle_801a5fe4-855a-4d18-a8dc-f28e658a6ee0.jpg?v=1676950140 PRINDLE 18 FORESTAY 5/32" BLACK WIRE WITH TURNBUCKLE Prindle 18 Forestay 5/32" Black with Turnbuckle Murrays Part# 002-2345-42 Forestay with turnbuckle for Prindle 18 is constructed to factory specifications. https://murrays.com/products/p18-shroud-5-32-black-roller-swaged 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_a0f7b5ac-58c0-492c-8ae5-aba05d3481d7.jpg?v=1676950142 PRINDLE 18 SHROUD 5/32" BLACK WIRE ROLLER SWAGED Prindle 18 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-2305-12 One single black shroud (sidestay) for Prindle 18 is constructed to factory specifications. Hydraulic swaging produces a cleaner, stronger shroud. https://murrays.com/products/p18-p18-2-diamond-wire-with-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/DiaWireNacPrin_097fe8e7-d1a8-4b40-b86f-42d0fa340582.jpg?v=1676950143 PRINDLE 18/18.2 DIAMOND WIRE WITH TURNBUCKLE Prindle diamond wire https://murrays.com/products/p18-2-forestay-5-32-black-with-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Prindle_9dd388eb-0644-40e9-a5fa-6fb096ecc7cc.jpg?v=1676950143 PRINDLE 18.2 FORESTAY 5/32"BLACK WIRE WITH TURNBUCKLE Prindle 18.2 Forestay 5/32" Black Wire with Turnbuckle Murrays Part# 002-2545-42 Forestay with turnbuckle for Prindle 18.2 is constructed to factory specifications. https://murrays.com/products/p18-2-upper-forestay-5-32 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2335-00_3d466870-882b-46e9-9109-2957bec25360.jpg?v=1676950146 PRINDLE 18.2 UPPER FORESTAY 5/32 Prindle upper forestay https://murrays.com/products/p18-2-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2415-22_c59e6e77-26a3-457b-90b6-35081670b825.jpg?v=1676950147 PRINDLE 18.2 BRIDLE 5/32-BLACK https://murrays.com/products/p18-2-shroud-5-32-black-roller-swaged 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_92e8c970-a2d2-4d6e-8837-85f456ab01cd.jpg?v=1676950147 PRINDLE 18.2 SHROUD 5/32' BLACK WIRE ROLER SWAGED https://murrays.com/products/p18-2-p19-jib-block-wire-4-way 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2424-20.jpg?v=1676950147 PRINDLE 18.2/19 JIB BLOCK WIRE 4-WAY https://murrays.com/products/p19-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2415-22_Prindle_Bridle_wire.jpg?v=1745874030 PRINDLE 19 BRIDLE 5/32 BK Prindle bridle wire https://murrays.com/products/p19-forestay-5-32-black-with-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_Prindle_19.jpg?v=1745873987 PRINDLE 19 FORESTAY 5/32"BLACK WIRE WITH TURNBUCKLE Prindle 19 Forestay 5/32" Black Wire with Turnbuckle Murrays Part# 002-2445-42 Forestay with turnbuckle for Prindle 19 is constructed to factory specifications. https://murrays.com/products/p19-shroud-5-32-black-roller-swaged 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_68738490-d804-434a-a518-cfe7f31cb897.jpg?v=1676950151 PRINDLE 19 SHROUD 5/32" BLACK WIRE ROLLER SWAGED P19 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-2405-12 Single black shroud (sidestay) for Prindle 19 is hydraulically swaged for a cleaner, stronger shroud. Constructed to factory specifications. https://murrays.com/products/p19-upper-forestay-5-32-bare 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2335-00_a2c06878-7311-4156-97e3-8c89b44c5064.jpg?v=1676950154 PRINDLE 19 UPPER FORESTAY 5/32" BARE WIRE P19 Upper Forestay 5/32" Bare Wire Murrays Part# 002-2435-00 Bare upper forestay for Prindle 19 is constructed to factory specifications. https://murrays.com/products/p19-diamond-wire-with-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Diamond-Wire-Nacra-Prindle.jpg?v=1745866442 PRINDLE 19 DIAMOND WIRE WITH TURNBUCKLE Prindle 19 Diamond Wire with Turnbuckle Murrays Part# 002-2494-20 Diamond wire with turnbuckle for Prindle 19 is constructed to factory specifications. Prindle part# 9879 https://murrays.com/products/p-escape-bridle-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2415-22_221de7c4-ee24-47ae-b18b-b437233fcb5d.jpg?v=1676950155 PRINDLE ESCAPE BRIDLE 5/32-BLACK https://murrays.com/products/p-escape-forestay-5-32-with-turnbuckle-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2645-42.jpg?v=1676950155 PRINDLE ESCAPE FORESTAY 5/32 WITH TURN BUCKLE https://murrays.com/products/p-escape-shroud-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2605-02.jpg?v=1676950158 PRINDLE ESCAPE SHROUD 5/32 BLACK https://murrays.com/products/pins-rings-kit-h17-h20-nacra 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3522.jpg?v=1676950159 H-17/20/NACRA PINS AND RINGS KIT clevis pins with split rings for the standing rig and mast stepping systems of Hobie 17, Hobie 20, or Nacra. Kit includes 18 pieces: mast hinge pin, clevis pin assortment, and split ring assortment.  Compare to Hobie Cat #30317. https://murrays.com/products/pins-rings-kit-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-4031.jpg?v=1676950159 H-18 PINS & RINGS KIT Hobie 18 clevis pin kit includes 13 pieces: mast hinge pin, clevis pin assortment, and split ring assortment. Compare to Hobie Part Number #30304 Murrays.com https://murrays.com/products/pins-rings-kit-hobie-14-hobie-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3031.jpg?v=1676950159 H-14/16 PINS AND RINGS KIT Kit for Hobie® 14 or 16 includes 16 pieces: mast hinge pin, clevis pin assortment and split ring assortment. Compare to Hobie Cat® #30303. https://murrays.com/products/pins-rings-kit-prindle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-5031.jpg?v=1779312996 PRINDLE PINS & RINGS KIT Prindle split rings and clevis pin kit, mast hinge pin https://murrays.com/products/plug-for-aluminum-stick 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-0064.jpg?v=1730309588 PLUG FOR ALUMINUM STICK Plug for Aluminum Stick Murrays Part# 001-0064 15/16"Outer Dimension plug fits the Murrays Aluminum Hiking Stick. https://murrays.com/products/power-downhaul-kit-h18-5-1 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/HOBIE_18_POWER_DOWNHAUL_KIT_-_5_1.jpg?v=1732301962 H-18 5:1 POWER DOWNHAUL KIT HOBIE 18 POWER DOWNHAUL KIT - 5:1 Get powerful downhaul adjustment from any sailing position. This Class-legal, 5:1 downhaul kit for Hobie® 18 includes a space-saving bracket with becket, two Harken bullet cheek blocks, Harken pivoting exit block with micro cleat, Harken double bullet block, trim line, fasteners and instructions. https://murrays.com/products/power-righting-system-i 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/IMG_0456.jpg?v=1676950167 POWER RIGHTING SYSTEM I Power Righting System I Murrays Part# 13-4101 https://murrays.com/products/power-righting-sytem-without-pole 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/IMG_0455.jpg?v=1728495355 POWER RIGHTING SYSTEM WITHOUT POLE https://murrays.com/products/pwc-footstrap-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2020.jpg?v=1676950168 PWC FOOTSTRAP KIT (PR) PWC Footstrap Kit Murrays Part# 001-2020 The PWC Footstrap Kit includes a pair of footstraps, twist control system and fasteners. A pre-formed arch prevents collapsing, so your foot slides right in and is cradled by the comfortable 7mm neoprene padding. Sold in pairs https://murrays.com/products/quick-release-pin-detent-1-4-x-1 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/18-4D100.jpg?v=1725901779 QUICK RELEASE PIN DETENT 1/4 X 1" Quick Release Pin Detent 1/4 X 1" Murrays Part# 18-4D100 This quick pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measures 1/4" diameter x 1" long. Can be used to replace 1/4" clevis pins up to 1" long.  Not recommended for use in shroud adjusters or chain plates. https://murrays.com/products/quick-release-bow-shackle-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3232.jpg?v=1676950170 QUICK RELEASE 1/4" BOW SHACKLE Hobie 3062 1/4" Bow shackle with quick release pin https://murrays.com/products/quick-release-bow-shackle-3-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3233.jpg?v=1676950172 QUICK RELEASE 3/16" BOW SHACKLE Replace a 3/16" bow shackle with this quick-release version to add convenience. Can be used on 2-1/4" blocks. Compare to Hobie Cat® #3062. https://murrays.com/products/quick-release-convenience-package-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3231.jpg?v=1676950172 H-16 QUICK RELEASE CONVENIENCE PACKAGE Quick-Release Convenience Package: H16 Murrays Part# 001-3231 This package makes set-up and take-down of your Hobie 16® more convenient. Kit includes: One #18-4R125 Quick Release Pin for hiking stick to crossbar connection. One #18-3M075L Quick Release Pin with Lanyard for mainsheet block to traveler car connection. One #21-1032 Quick Twist Halyard Shackle for jibsheet blocks to jib clew boom to mast connection. One #21-1155L Toggle Pin with Lanyard for forestay to adjuster connection. Four #01-0127 Car https://murrays.com/products/quick-release-pin-deluxe-1-4-x-1-1-2-with-lanyard 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m125L-1.jpg?v=1676950174 QUICK RELEASE DELUXE PIN 1/4 X 1-1/2" WITH LANYARD Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421 https://murrays.com/products/quick-release-pin-deluxe-1-4-x-1 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m100-1.jpg?v=1676950174 QUICK RELEASE DELUXE PIN 1/4 X 1" Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie Part# 8020410 and 8020411 clevis pin https://murrays.com/products/quick-release-pin-deluxe-1-4-x-1-1-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m150-1.jpg?v=1676950175 DELUXE QUICK RELEASE PIN 1/4 X 1.5" Deluxe Quick Release Pin 1/4 X 1.5" Murrays Part# 18-4M150 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Also available with a lanyard, see related items below. Quick pins are ideal for replacing clevis pins in areas that you would like to be able to quickly connect and disconnect. Uses: Hobie 18 mast hinge pin Compare to Hobie part# 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 802 https://murrays.com/products/quick-release-pin-deluxe-1-4-x-1-with-lanyard 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m100L.jpg?v=1676950176 DELUXE QUICK RELEASE PIN 1/4 X 1" WITH LANYARD Deluxe Quick Release Pin 1/4 X 1 with Lanyard Murrays Part# 18-4M100 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie 8020410 and 8020411 clevis pin https://murrays.com/products/quick-release-pin-deluxe-1-4-x-1-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m125-1.jpg?v=1676950178 QUICK RELEASE DELUXE PIN 1/4 X 1-1/4" Quick Release Deluxe Pin 1/4 X 1.25" Murrays Part# 18-4M125 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Also available with a lanyard, see related items below. Uses: This pin is recommended for connection of hiking stick to crossbar on all Hobie, Nacra and Prindle catamarans. Also used on Hobie 18 SX and Hobie Magnum wings. Compare to Hobie part# 20306 PIN, QR 1/4 X 1-1/4 CUP https://murrays.com/products/quick-release-pin-deluxe-1-4-x-3-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m075-1.jpg?v=1676950178 QUICK RELEASE DELUXE PIN 1/4 X 3/4" Quick-Release Pin Deluxe 1/4 X 3/4 Murrays Part# 18-4M075 This economical pin features a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. The pin is also available with a lanyard to help prevent loss of pin (see related items below). Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to the locking ball bearings). Compare to Hobie Cat® #20302. https://murrays.com/products/quick-release-pin-deluxe-1-4-x-1-1-4-with-lanyard 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m125L-1_6cba6aca-8872-4918-b46a-6e142d1d1c8d.jpg?v=1676950180 QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L https://murrays.com/products/quick-release-pin-deluxe-1-4-x-3-4-with-lanyard 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-4m075L-1.jpg?v=1676950180 QUICK RELEASE PIN 1/4 X 3/4" WITH LANYARD Quick-Release Pin Deluxe 1/4 X 3/4 with Lanyard Murrays Part# 18-4M075L This aircraft quality quick-release pin features a deluxe dished head. No other locking pin is faster operating or safer. Stainless 1/16" x 7" lanyard stainless lanyard is secured on one end with a nicropress oval; the other end is left open so that you can secure with included nicropress oval after attaching the lanyard to your chosen location. Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to https://murrays.com/products/quick-release-pin-deluxe-3-16-x-3-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/18-3m075-2.jpg?v=1676950182 QUICK RELEASE PIN DELUXE 3/16 X 3/4" Quick Release Pin Deluxe  3/16 X 3/4" Murrays Part# 18-3M075 This Quick Release Pin features 2 locking balls for a extra secure grip, and a push button deluxe dished head with a hole for lanyard attachment. The Deluxe pin is quick and easy to remove and install, and makes getting on and off the water quicker and easier. https://murrays.com/products/quick-release-pin-detent-1-4-x-3 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/18-4D300.jpg?v=1737143876 QUICK RELEASE DETENT PIN 1/4 X 3" Quick Release Detent Pin 1/4 X 3" Murrays Part# 18-4D300 Economical quick release pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measurements are 1/4" diameter x 3" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: - Use as mast step pin on Hobie® 21 and Prindle 16/18/18-2/19 cats. Compare to Hobie part # 8020501 https://murrays.com/products/replaceable-trap-handle-aluminum 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-2010.jpg?v=1676950191 REPLACABLE ALUMINUM TRAP HANDLE Replaceable Aluminum Trap Handle Murrays Part# 007-2010 Foam-covered aluminum handle is easily installed onto existing trapeze wire. Carry a spare as a temporary repair, then replace the wire at your convenience. Each. Hobie Cat® Part# 2010 https://murrays.com/products/replacement-sheave-prindle-rudder-upper 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-1741.webp?v=1718994663 RONSTAN 19MM ACETAL SHEAVE, 6MM WIDTH Replacement Sheave Prindle Rudder Upper Ronstan PN RF1741 Replacement sheave for upper part of rudder casting on all models of Prindle catamarans. Replacement for Performance Sports item #4009. 1/4" wide x 3/4" diameter, 1/4" hole. https://murrays.com/products/replacement-double-button-3-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/03-0219.jpg?v=1676950193 REPLACEMENT DOUBLE BUTTON 3/8 https://murrays.com/products/replacement-vane-for-hobie-bridle-vane 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/004-7704.jpg?v=1734645315 REPLACEMENT HOBIE WIND VANE REPLACEMENT HOBIE WIND VANE Hobie part number CM7703 https://murrays.com/products/rigging-tape-1x-15-white 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-3460.jpg?v=1676950195 RIGGING TAPE 1"X 15' WHITE Rigging Tape 1"X 15' White Murrays Part# 010-3460 Protects against chafing and sharp edges while providing safety for sails, lines and rope ends. This self-bonding tape is waterproof and leaves no sticky residue. 1" x 15 feet. https://murrays.com/products/ring-stainless-steel-welded-1-8x3-4id 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-3320.jpg?v=1706562705 RING SS WELDED 1/8"x3/4"ID Ring Stainless Steel Welded 1/8"x3/4"ID https://murrays.com/products/righting-bag-only-200-lbs 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3282-2013.jpg?v=1676950197 RIGHTING BAG ONLY (200+LBS) Righting Bag Only (200+LBS) Murrays Part# 001-3282 This is the bag only from Murrays' popular Cat Righting Big Bag System (#01-3280). The 18" x 32" bag attaches with hook and loop straps under the tramp for easy use and storage. The theoretical maximum capacity of the bag is 250 lbs. https://murrays.com/products/ring-1-4-x-2-diameter-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/25-3050-300x300.jpg?v=1738958985 RING: 1/4 X 2" DIAMETER (SS) Ring: 1/4 X 2 Diameter (Stainless Steel) Murrays Part# 25-3050 1/4" x 2" stainless ring can be used for Prindle-style jib halyards. https://murrays.com/products/ring-welded-3-16-x-1id-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-3535.jpg?v=1771263631 RING SS WELDED 3/16"x 1" ID https://murrays.com/products/ring-3-8-x-2-id-nylon 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-190570.jpg?v=1676950199 RING 3/8 X 2" (NYLON) Ring 3/8 X 2" (Nylon) Murrays Part# 27-190570 3/8" nylon ring has an inside diameter of 2 inches. https://murrays.com/products/rivet-aap-6-6-3-16-x-3-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5012.jpg?v=1676950200 RIVET AAP 6-6 (3/16 X 3/8) Rivet AAP 6-6 (3/16 X 3/8) Murrays Part# 19-5012 A rivet gun is required for installation of this 3/16" x 3/8" aluminum pop rivet. https://murrays.com/products/rivet-aap-6-10-3-16-x-5-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5014.jpg?v=1676950200 RIVET AAP 6-10 (3/16 X 5/8) Rivet AAP 6-10 (3/16 X 5/8) Murrays Part# 19-5014 A rivet gun is required for installation of this 3/16" x 5/8" aluminum pop rivet https://murrays.com/products/rivet-aap-6-4-3-16-x-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5011.jpg?v=1676950203 RIVET AAP 6-4 (3/16 X 1/4) Rivet AAP 6-4 (3/16 X 1/4) Murrays Part# 19-5011 A rivet gun is required for installation of this 3/16" x 1/4" aluminum pop rivet. https://murrays.com/products/rivet-casing-6-10-3-16-x-1-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5020.jpg?v=1676950204 RIVET CASING 6-10(3/16 X 5/8) Hobie rivet casings sleeves seal rivets to prevent water penetration. When used with a rivet they seal the hole to prevent water from getting through the center of the rivet. Rivet Casings are recommended for use on all rivets on the mast to keep the mast water tight. Compatible with all 3/16 diameter rivets up to 5/8" long. Compatible with all rivets on Hobie, Nacra and Prindle catamarans except traveler tracks. Requires 13/64" hole. Hobie part number 8011291, 8011290, also called rivet cap. https://murrays.com/products/rivet-ccc-6-4-3-16-x-1-4-countersunk 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5021.jpg?v=1676950204 RIVET CCC 6-4 (3/16 X.25 CSK) RIVET CCC 6-4 (3/16 X.25 CSK) Murrays Part# 19-5021 This size stainless steel countersunk rivet. 002-1041 stop sleeve is helpful for track instillation as a spacer to fit into the track to help get the rivet flush. https://murrays.com/products/rivet-ccc-6-6-3-16-x-3-8-countersunk 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/19-5024_2.jpg?v=1721243983 RIVET CCC 6-6 CSK Rivet CCC 6-6 (3/16 X 3/8) Countersunk Murrays Part# 19-5024 Countersunk stainless steel 3/16" x 3/8" rivet for traveler tracks, etc. Compare to Hobie Part # 8010201. This rivets is what Hobie recommends for both the main traveler tack and the jib traveler track. We also recommend using an 1/8" stop sleeve, part number 002-1041, as a spacer to help you apply pressure on the rivet inside the track, as the track is too narrow for most rivet guns to get far enough inside to apply pressure to the rivet. https://murrays.com/products/rivet-ccp-4-6-1-8-x-3-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5030.jpg?v=1676950208 RIVET CCP 4-6 (1/8 X 3/8) Rivet CCP 4-6 (1/8 X 3/8) Murrays Part# 19-5030 Stainless steel 1/8" x 3/8" rounded pan head rivet. https://murrays.com/products/rivet-ccp-6-6-3-16-x-3-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5032.jpg?v=1676950208 RIVET CCP 6-6 (3/16 X 3/8) RIVET CCP 6-6 (3/16 X 3/8) Murrays Part# 19-5032 Stainless steel 3/16" x 3/8" pan head rivet Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified: Hobie 14 (2) or 16 (4) mast head Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4) Hobie 14/16 rudder upper casting (2) Hobie 14/16 tiller end cap (2) Hobie 14/16 boom front end cap (3) Pair with stainless steal rivet casings to seal the holes when using on the mast. https://murrays.com/products/rivet-ccp-6-4-3-16-x-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5031.jpg?v=1676950209 RIVET CCP 6-4 (3/16 X 1/4) Rivet CCP 6-4 (3/16 X 1/4) Murrays Part# 19-5031 Stainless steel 3/16" x 1/4" rounded pan head rivet. Compare to Hobie Cat® #8010181. This is a common rivet used on many extrusions. Hobie, Nacra, Prindle masts and booms. Pair with a rivet casing to seal the rivet hole when used on masts. All Hobie mast hounds, tangs, heads, and cheek blocks. Used with Hobie Getaway Bow Spreader Plates Used on Hobie Getaway FWD and REAR Crossbar Stop Plates https://murrays.com/products/rivet-ccp-6-8-3-16-x-1-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5033.jpg?v=1676950211 RIVET CCP 6-8 (3/16 X 1/2) Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033 Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231. https://murrays.com/products/rivet-mcp-6-6-3-16-x-3-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5022.jpg?v=1676950212 RIVET MCP 6-6 Rivet MCP 6-6 (3/16 X 3/8) Murrays Part# 19-5022 Rounded pan head 3/16" x 3/8" Monel rivet. Compare to SS version Hobie Cat® #8010131. https://murrays.com/products/rivet-ccp-6-10-3-16-x-5-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5034.jpg?v=1676950212 RIVET CCP 6-10 (3/16 X 5/8) Rivet CCP 6-10 (3/16 X 5/8) Murrays Part# 19-5034 Stainless steel 3/16" x 5/8" rounded pan head rivet. Compare to Hobie Cat® #8010121. Halyard mast cleat rivet https://murrays.com/products/rivet-mcp-8-6-1-4-x-3-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5042.jpg?v=1676950213 RIVET MCP 8-6 (1/4 x 3/8) Rivet MCP 8-6 (1/4 x 3/8) Murrays Part# 19-5042 Rounded pan head 1/4" x 3/8" Monel rivet. https://murrays.com/products/rivet-msp-6-10-3-16-x-5-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5023.jpg?v=1676950216 RIVET MSP 6-10 3/16 X 5/8" PH Rivet MSP 6-10 3/16 X 5/8" PH Murrays Part# 19-5023 Rounded pan head 3/16" x 5/8" Monel rivet. Compare to Hobie Cat® Part# 8010121 https://murrays.com/products/rivet-solid-a-6-6-3-16-x-3-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5006.jpg?v=1730310470 RIVET SOLID BRASS 3/16" RIVET SOLID BRASS 6-6 (3/16x3/8") Solid Brass 3/16" x 3/8" rivet is designed to be set with a hammer. Commonly used to secure sail luff plates, clew plates, tack plates and headboards. https://murrays.com/products/rivet-solid-a-4-6-1-8-x-3-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-5005.jpg?v=1734554539 RIVET SOLID A 4-6 (1/8x3/8") Rivet Solid A 4-6 (1/8 X 3/8) Murrays Part# 19-5005 Solid aluminum 1/8" x 3/8" rivet is designed to be set with a hammer. https://murrays.com/products/roller-fairlead-kit-swivel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3002.jpg?v=1676950217 ROLLER FAIRLEAD KIT (SWIVEL) https://murrays.com/products/roller-fairlead-roller 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/00-3002-4.jpg?v=1676950221 ROLLER FAIRLEAD ROLLER Roller Fairlead Roller Murrays part# 0100-3002-4 Replacement roller for #25-3002 roller fairlead. https://murrays.com/products/ronstan-block-bullet-loop-top-linked 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-20284.jpg?v=1719333792 RONSTAN SERIES 20 BALL BEARING BLOCKS LINKED AT 90 DEGREES Ronstan Series 20 Ball Bearing Block with Series 20 block linked at 90 Degrees Murrays Part# 21-2028 As used on the Murrays No-Cut Hi-Low Trapeze Adjustment Kit. Precision molded Acetal sheaves run on stainless steel or Torlon® ball bearings to provide high performance and low friction. The Ronstan back-to-back blocks have 3/4" sheaves and 1/4" maximum line diameter. Maximum working load is 550 lbs.; breaking load is 1210 lb. Weighs only 1.1 oz. Ronstan part #RF20284. https://murrays.com/products/ronstan-block-hanger 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0180.webp?v=1718899184 RONSTAN BLOCK HANGER Ronstan Block Hanger Murrays Part# 21-0180 The Ronstan block hanger enables you to hang a block from the boom. Constructed of grade 316 stainless steel, it measures about 3" length overall and has four 5mm (3/16") diameter fixing holes with 1" hole spacing. The block hanger is not a Hobie® factory replacement part, but it can be bent to fit your boom and holes can be drilled for your application. Use four #19-5031 6-4 rivets for installation. Weighs .7 oz. 64mm (2 1/2") long. 4 x 5mm (3/16") dia. https://murrays.com/products/ronstan-block-kite-300-swl 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-13101.webp?v=1718991461 RONSTAN SERIES 15 KITE BLOCK, BLACK WITH WHITE SHEAVE Ronstan Series 15 Kite Block, Black with White Sheave Murrays Part# 21-13101 Ronstan's little block has twice the working load of their previous kite block (black RF668) with half the weight. Replace older, heavier blocks now! 300# SWL; Sheave diameter 5/8"; max. line size 5/32". https://murrays.com/products/ronstan-block-midget-single-cheek 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0661.webp?v=1718983451 RONSTAN MIDGET SINGLE BLOCK (CHEEK) Ronstan Series 20 Utility Block, Tube Rivet Murrays Part# 21-0661 Rontan's cheek block is a Hobie® 18 and Prindle downhaul and turning block. Stainless steel cheeks and Acetal sheaves ensure a long service life with virtually no maintenance. Hollow rivets in the block heads can be fitted with shackles, which can also be used to add a becket for extra purchase. https://murrays.com/products/ronstan-block-loop-top-single 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0571.webp?v=1718915160 PRINDLE LOOP TOP SINGLE BLOCK https://murrays.com/products/ronstan-block-orbit-20mm-single-lashing-bullet 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/RF25109-with-rope.jpg?v=1676950229 ORBIT 20MM SINGLE LASHING Orbit 20mm Single Lashing Murrays part# 21-25109 Ronstan ball bearing Orbit Blocks™ boast the highest strength-to-weight ratio available, achieved through all-composite reinforced polymer materials and multiple attachment options. Use the 20mm BB for control lines on catamarans and dinghies to 16 feet (5m), especially downhaul, outhaul and spinnaker halyards. https://murrays.com/products/ronstan-block-orbit-30mm-single-lashing-bullet 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-35101.webp?v=1719334917 RONSTAN SERIES 30 BALL BEARING ORBIT BLOCK, LASHING Ronstan Series 30 Ball Bearing Orbit Block, Lashing Murrays Part# 21-35101 Ronstan ball bearing Orbit Blocks™ boast the highest strength-to-weight ratio available, achieved through all-composite reinforced polymer materials and multiple attachment options. Ultra low profile through-sheave becket. Use for jib clew block. https://murrays.com/products/ronstan-block-orbit-55mm-single-with-swivel-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-56100.webp?v=1719347058 RONSTAN SERIES 55 ORBIT BLOCK, RATCHET Ronstan Series 55 Orbit Block™, Ratchet Murrays Part# 21-56100 Now you can enjoy the flexibility of setting up your ratchet blocks to suit yourself. Ronstan is the only company that offers a ratchet block with both auto and manual engagement modes. In the auto mode of the ratchet mechanism engages when load is applied, but switches off when it's released. This lets the sheet run out smoothly and freely-great for rapid easing of the sheet and for gybing asymmetric spinnakers. https://murrays.com/products/ronstan-block-orbit-30mm-single-with-swivel-and-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-35100.webp?v=1719334806 RONSTAN SERIES 30 BALL BEARING ORBIT BLOCK, BECKET AND SWIVEL SHACKLE https://murrays.com/products/ronstan-block-single-bullet-20mm-with-swivel-shackle-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-2010.webp?v=1718994815 RONSTAN SERIES 20 BALL BEARING SINGLE BLOCK WITH SWIVEL SHACKLE Ronstan Series 20 Ball Bearing Single Block with Loop Top Murrays Part# 21-2010 Ronstan's 20mm single bullet block with swivel shackle head is lightweight and has low friction and a high static and dynamic load capacity. Precision molded Acetal sheaves running on stainless steel ball bearings provide high performance and low friction. Materials include: Stainless steel ball bearings, UV-stabilized Acetal sheave, grade 316 stainless steel load strap and head fitting, and impact and UV -resistant https://murrays.com/products/ronstan-block-small-fiddle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0186.webp?v=1718899340 RONSTAN SMALL FIDDLE BLOCK Ronstan Series 30 Utility Block, Fiddle Murrays Part# 21-0186 Use this Ronstan small fiddle block for 4:1 system for boom vangs or righting aids. This is used for H16 Aussie Halyard Systems too Fiddle block with tube rivets https://murrays.com/products/ronstan-block-small-becket 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0188.webp?v=1718899727 RONSTAN SMALL BECKET BLOCK Ronstan Small Becket Block Murrays Part# 21-0188 Use this Ronstan single block with becket for 3:1 system for boom vangs or righting aids. 1/4" line capacity. SWL 660 lbs. https://murrays.com/products/ronstan-block-single-with-ferrule 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0469-1_a01714be-327a-4acc-ad14-cb773f2c7842.jpg?v=1744238480 RONSTAN SINGLE BLOCK WITH FERRULE Ronstan Single Block, Ferrule Murrays Part# 21-0469 This is the original clew block on most of the old Hobie cat Sailboats. This will work as a replacement jib clew block for Hobie® 14, 16 and 18 cats. Lightweight stainless block with ferrule has 1-1/8" x 5/8" sheave diameter, Delrin bearing and 1/2" line capacity. SWL: 950 lbs. This is a great option if you're looking to use a larger line diameter on your sheets or want the classic look. https://murrays.com/products/ronstan-cam-cleat-c-cleat-medium 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5010.webp?v=1719340555 RONSTAN MEDIUM "C-CLEAT" CAM Ronstan Medium "C-Cleat" Cam Murrays Part# 21-5010 Lightweight and durable with quick response and easy entry/exit effort. Outstanding grip, corrosion resistant (no aluminum cams). Fast Track Fairlead option permits widest range of cleating angles without need for rotation. Saves complexity, weight and cost for barberhauler control cleats. 1/8" to 1/2" line; SWL 400 lbs. https://murrays.com/products/ronstan-clear-start-race-timer 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Clearstart-race-timer.jpg?v=1676950241 RONSTAN CLEARSTART RACE TIMER 65MM Ronstan Clearstart Race Timer 65mm Murrays Part# 21-4030 Ronstan Clearstart™ Race Timer's are specifically designed with the racing sailor in mind, combining contemporary styling with true sailing functionality. https://murrays.com/products/ronstan-cam-cleat-c-cleat-small 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-5000.jpg?v=1676950241 RONSTAN SMALL "C-CLEAT' CAM, GREY https://murrays.com/products/ronstan-fairlead-forged-loop-1-7-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0134.webp?v=1718898453 RONSTAN FAIRLEAD FORGED "LOOP" 1-7/16 Ronstan Fairlead Forged "Loop" 1-7/16 Murrays Part# 21-0134 Grade 316 stainless steel replacement loop for #21-0371 Track Slide. Specifications: A = 9/16" B = 3/16" C = 1-7/16" D = 3/16" Weight 0.2 oz. Hobie Part# 60330040 https://murrays.com/products/ronstan-eyestrap-with-ferrule-eye 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0499.webp?v=1718914573 RONSTAN EYESTRAP WITH FERRULE EYE Ronstan Ferrule Eye 8mm Clearance Murrays Part# 21-0499 Ronstan's grade 316 grade stainless steel eyestrap has a ferrule that guides line and provides a nice lead from any angle. Weighs 0.1 oz. Measurements: A = 3/8" ferrule eye diameter B = 3/16" width C = 1-1/8" distance between holes center-to-center D = 5/32" hole diameter Ronstan Part# RF499 https://murrays.com/products/ronstan-fairlead-fast-track-medium 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5015.webp?v=1719340775 RONSTAN FAIRLEAD FOR MEDIUM CAM CLEATS Ronstan Fairlead for Medium Cam Cleats Murrays Part# 21-5015 Ronstan's front-mounted fairlead is easily fitted to the T-Cleat and C-Cleat. It allows precise cleating and release from any lead angle. Lower entry efforts for off-center cleating. Will not catch lines or clothing. Constructed of tough, abrasion resistant composite material. Weight: .5 oz. https://murrays.com/products/ronstan-furler-drum-2-5-fork-fork 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0076.webp?v=1718897325 Ronstan Furler Drum 2.5 Fork/Fork https://murrays.com/products/ronstan-fairlead-fast-track-small 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5005.webp?v=1719340494 RONSTAN FAIRLEAD FOR SMALL CAM CLEATS, FRONT MOUNT Ronstan Fairlead for Small Cam Cleats, Front Mount Murrays Part# 21-5005 The small Fast Track fairlead is easily fitted to Ronstan's small C-Cleat (#21-5000) to allow precise cleating and release from any lead angle. Lower entry efforts for off-center cleating. Will not catch lines or clothing. Ronstan Part# RF5005 https://murrays.com/products/ronstan-micro-single-loop-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-2011.webp?v=1718995005 RONSTAN SERIES 20 BALL BEARING SINGLE BLOCK WITH LOOP TOP For kiteboarding, upgrade bow and flat kite bridle pulleys with Ronstan's micro pulleys to extend the life of your bridles and increase the working strength. 550 lb. working load. https://murrays.com/products/ronstan-multi-purpose-tool 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-1320-1.jpg?v=1676950253 RONSTAN MULTI-PURPOSE TOOL Ronstan Multi-Purpose Tool Murrays Part# 21-1320 The Ronstan Multi-Purpose Tool is a screwdriver with two shackle sockets and wrench for #8, 10 and 1/4" nuts as well as metric nuts. The 3/4"- thick plastic body provides better grip than flat stainless tools. Suits both coined and slotted shackle pins, and small nylon-insert nuts https://murrays.com/products/ronstan-orbit-55-jib-block 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-56130.webp?v=1719347222 RONSTAN SERIES 55 ORBIT BLOCK, RATCHET WITH BECKET AND CAM CLEAT Ronstan Series 55 Orbit Block, Ratchet with Becket and Cam Cleat Murrays Part# 21-56130 The Ronstan Orbit 55 Jib Block Ratchet Orbit Block™ has the highest holding power available and is ideal as a jib sheet cleat for the Hobie® 18, Hobie® 20, etc. The automatic ratchet mechanism engages when load is applied, but switches off when it's released. https://murrays.com/products/ronstan-riser-pad-for-medium-c-cleats 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5016.webp?v=1719341868 RONSTAN CURVED SURFACE BASE/RISER FOR MEDIUM CAM CLEATS Ronstan Curved Surface Base/Riser for Medium Cam Cleats Murrays Part# 21-5016 Ronstan riser/curved surface adapter fits medium C-Cleat and T-Cleat. Use on round surface such as mast or crossbar. Ronstan Part# RF5416 https://murrays.com/products/ronstan-roller-furling-swivel-eye-eye 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0078.webp?v=1718897481 RONSTAN ROLLER FURLING SWIVEL (EYE/EYE) Ronstan Eye & Eye Swivel Murrays Part# 21-0078 This ball bearing swivel by Ronstan has lower friction and higher working loads than non-ball bearing versions. It is used in conjunction with blocks and rigging systems to provide articulation and rotation. Not suitable for high-speed rotating applications. https://murrays.com/products/ronstan-roller-furling-swivel-eye-jaw 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-078B.webp?v=1718983884 RONSTAN SWIVEL EYE/FORK Ronstan Eye & Fork Swivel Murrays Part# 21-078B Ronstan swivel is constructed of grade 316 stainless steel, weighs 2.1 oz. and has a breaking load of 3740 lb. Center of pin to center of eye measurement is 1-7/8". Features: Smooth articulation. Ball bearing performance. https://murrays.com/products/ronstan-shackle-swivel-3-16-jaw-jaw 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0120.webp?v=1718897766 RONSTAN SWIVEL SHACKLE 3/16" (JAW/JAW) Ronstan Swivel Shackle 3/16" (Jaw/Jaw) Murrays Part# 21-0120 Ronstan's swivel shackle has 3/16" diameter pins and 1430 lb. breaking load. Bodies and pins are constructed of grade 316 stainless steel. 1-1/4" length from centers of pins. Weighs .7 oz. Specific Details: A (in) 3/16 B (in) 15/32 C (in) 1 1/4 E (in) 11/32 Ronstan Part# RF120 https://murrays.com/products/ronstan-sheave-p16-nacra-mast-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Prindle_16_mast_head_sheave_part_number_6003.webp?v=1733183544 RONSTAN SHEAVE: P16 AND NACRA MAST HEAD Replacement sheave for mast head on Nacra 5.0, 5.2, 5.5, 5.7, 5.8, 6.0, 18 Square, Prindle 16 and Sol Cat 18 (cats that use a wire halyard). UV-resistant acetal material provides high strength and resistance to impact and wear, as well as excellent low friction properties for bearing applications. https://murrays.com/products/ronstan-shackle-swivel-1-4-jaw-jaw 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0173.webp?v=1718899013 RONSTAN SHACKLE WITH SWIVEL 1/4" (JAW/JAW) https://murrays.com/products/ronstan-shock-block-5mm-pair 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-8080.webp?v=1719348536 RONSTAN SMALL SHOCK 3/16" Ronstan shock block Part # RF8080 5mm https://murrays.com/products/ronstan-single-upright-lead-block 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-2379.jpg?v=1676950264 RONSTAN SINGLE LEAD BLOCK Ronstan Single Lead Block Murrays Part# 21-2379 Lead blocks are a low profile solution for leading halyards or other rig sail controls back to cleats or jammers. This Ronstan lead block features U.V.-stabilized Acetal sheave and grade 316 stainless steel load housing. Typically used in dinghy spars for control lines. https://murrays.com/products/ronstan-snap-shackle-with-swivel-tack-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-6130.webp?v=1719347566 RONSTAN SWIVELING FORK SNAP SHACKLE 72MM Ronstan Swiveling Fork Snap Shackle 72mm Murrays Part# 21-6130 Top quality Ronstan stainless steel swiveling tack shackle with 1/4" clevis pin features heavy duty plunger springs and precision components to ensure dependable service. Body and hasp profiles are designed for easy clearance of lines and fittings when released. High strength-to-weight ratio. https://murrays.com/products/ronstan-swivel-360-with-small-c-cleat 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0067.webp?v=1718897113 RONSTAN SWIVEL 360 WITH SMALL C-CLEAT https://murrays.com/products/ronstan-swivel-cleat-large-c-with-fast-track 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0058.jpg?v=1718896860 RONSTAN LARGE SWIVEL CLEAT WITH FASTRACK Ronstan Swiveling Fairlead & Cam Cleat for 3-12mm Rope Murrays Part# 21-0058 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Swivel cleat bases permit easy cleating and releasing from any angle. Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy gauge alloy for stiffness and minimum distortion under load. Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads with fasteners https://murrays.com/products/ronstan-swiveling-cleat-platform 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/rf5.jpg?v=1718896258 RONSTAN SWIVELING CLEAT UNIT, 28MM BALL BEARING SHEAVES Ronstan Swiveling Cleat Unit, 28mm Ball Bearing Sheaves Murrays Part# 21-0005 Swivel cleat bases permit easy cleating and releasing from any angle. Sheave can be relocated to allow the control line to feed from below. Fiber-reinforced nylon body. Comes complete with a 28mm (1-1/4") ball bearing sheave, small T-Cleat and the Fast Track fairlead. Typically fitted to dinghy and catamaran spars for halyard, cunningham or outhaul control. https://murrays.com/products/ronstan-trapeze-handles-vertical-grip-pair 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5122R.webp?v=1719342257 RONSTAN TRAPEZE HANDLES-ROPE STYLE (2) Ronstan Red Trapeze Handles -Rope Style Murrays Part# 21-5122R Ronstan's new rope-style trapeze handle has an ergonomic, soft-molded vertical grip with large base disc. It was originally developed for use with Dyneema® trap lines, but is just as suitable for wire (it accepts a copper ferrule swaged on a 2.5mm wire in the recess under the disc) and has a hole diameter of 7mm (18/64"). The vertical handles are suitable for use on trapeze dinghies, skiffs and off-the-beach catamarans. https://murrays.com/products/ronstan-v-cleat-open-1-8-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5100.webp?v=1719342007 RONSTAN OPEN V-CLEAT FOR 3-6MM LINE https://murrays.com/products/ronstan-v-cleat-with-fairlead-1-8-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-5101.webp?v=1719342139 ROSTAN FAIRLEAD V-CLEAT FOR 3-6MM LINE Ronstan Fairlead V-Cleat for 3-6mm Line Murrays Part# 21-5101 Ronstan's carbon-composite V-cleats are strong, lightweight and inexpensive, and are a simple solution to cleating lines under moderate loads. This cleat is great for control lines on catamarans and dinghies. A cutaway in base of fairlead cleats can be used as a becket for a 2:1 purchase system. Use with rope diameters of 1/8"-1/4". Measurement between hole centers is 1-7/8" and the cleat weighs only 0.4 oz. https://murrays.com/products/rope-end-stop 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0199.jpg?v=1676950276 ROPE END STOP Rope End Stop Murrays Part# 27-0199 This 1-1/8" diameter plastic ball has a 1/4" hole and comes in assorted colors as available. The hole on one end accommodates the stop knot. https://murrays.com/products/rope-lock-nylon 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie-Rope-Lock-61530000_01-0120-murrays.com.jpg?v=1676950277 NYLON ROPE LOCK Rope Lock (Nylon) Murrays Part# 001-0120 Easy-to-adjust black rope lock commonly used for trapeze height adjustment. Standard rope stop on Hobie®, Nacra and Prindle. Double-up back-to-back for extra strength. Hobie part number 61530000 for this rope lock. Works on 3/16 to 1/4" line https://murrays.com/products/rudder-cam-kit-hobie-14-hobie-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2050_Hobie_rudder_cam_kit_5202.jpg?v=1734023159 H-14/16 RUDDER CAM KIT Murrays Part# 001-2050 The Hobie Rudder Cam Kit: Hobie 14, Hobie 16 are replacement rudder cams to keep the rudder lock-down mechanism on your Hobie Cat® functioning properly. The Hobie® 14 or 16 kit includes two cams, two reusable, internally threaded sister screws for both sides, and instructions. Purchase the complete kit if your boat has the stock flare pins; purchase just the cams (#50-10480000 each) if your boat already has sister screws.  Compare to Hobie Cat® #5202. https://murrays.com/products/rudder-cam-kit-h17-h18-h20-h21-wave-getaway 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3550.jpg?v=1676950280 H-17/18/20/21/WAVE AND GETAWAY RUDDER CAM KIT H17/18/20/21/Wave and Getaway Rudder Cam Kit Murrays Part# 001-3550 The Rudder Cam Kit: H17, H18, H20, H21, Wave, & Getaway are replacement rudder cams which help keep your Hobie’s rudder lock-down mechanism functioning properly. This kit includes sister screws to install the cams, making it easier to replace the cams. Purchase the complete kit if your boat has the stock flare pins; or you can purchase just the cams (#50-10480000 each) if your boat already has sister screws. https://murrays.com/products/rudder-cam-screws-h17-h18-h20-older-wave 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-3551_RUDDER_CAM_PINS_HOBIE17-18-20.jpg?v=1744914841 H-17/18/20/OLDER WAVE AND GETAWAY RUDDER CAM PINS Rudder Cam Screws H17, H18, H20, Older Wave and Getaway Murrays Part# 001-3551 The Murrays Rudder Cam Pins are a pair of sister screws for use on the Hobie 17, 18, 20, 21, as well as the older Hobie Wave and Getaway rudder cams. These pins are an upgrade form the original stock hollow flare rivet that came on the Hobie. The Sister Screws are much easier to install and remove, and they are reusable. Compare to Hobie Cat® #5203 and #50312301. Sold in pairs https://murrays.com/products/rudder-cam-sister-screws-hobie-14-hobie-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-2051_Murrays_Hobie_16_rudder_cam_pins.jpg?v=1755722403 H-14/16 RUDDER CAM SISTER SCREWS The Murrays Rudder Cam Sister Screws: Hobie 14, Hobie 16 are a pair of sister screws for Hobie 14 and 16 rudder cams. These pins are much easier to install and remove than the stock pin and they are reusable! Sold in pairs Hobie Cat Part# 10470000 Hobie Part# 5201 https://murrays.com/products/rudder-gudgeon-upper-h14-h16-h17-only 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3351.jpg?v=1676950283 H-14/16 UPPER GUDGEON H14/16 Upper Gudgeon Murrays Part# 25-3351 This latest, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14's, 16's and 17, order separate upper and lower gudgeons.  For all other Hobie® cats Part# 25-3352 for both gudgeons. Each This gudgeon is a replacement for item #50101301 https://murrays.com/products/rudder-pins-h17-h18-nylon 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Nylon_rudder_pins.png?v=1715122407 RUDDER PINS H-17/18 PR (NYLON) Rudder Pins H17/18 (Nylon) Murrays Part# 001-4271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. These universal 3/8" x 9-1/4" nylon rudder pins are suited for all Hobie® 17/18/Wave rudder castings. Compare to Hobie Cat® #5052 fiberglass rudder pins (pair). https://murrays.com/products/rudder-pins-hobie-14-hobie-16-aluminum 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie_16_rudder_pins_aluminum.jpg?v=1744839123 H-14/16 ALUMINUM RUDDER PINS H14/16 Aluminum Rudder Pins Murrays Part# 001-2272 Aluminum rudder pins are standard on Hobie® 14 and 16 and are good for all-around, low maintenance use. Pair of 3/8" x 8" rudder pins with cotter pins. New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be difficult to remove. The stainless pins are a better fit. Sold in pairs https://murrays.com/products/rudder-pins-h17-h18-wave-getaway-aluminum 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-4274_Aluminum_Hobie_17_-_18_rudder_pins_57490e28-7e74-407b-b7ea-7cb0b0997cdf.jpg?v=1718812039 H-17/18/WAVE AND GETAWAY ALUMINUM RUDDER PINS Rudder Pins H17, H18, Wave, Getaway (Aluminum) Murrays Part# 001-4274 Aluminum rudder pins for the Hobie 17, 18, Wave and Getaway.  Aluminum 3/8″ x 9-1/4″ rudder pins, cotter pins are included.  Sold in pairs Compare to Hobie Cat® #60880001 https://murrays.com/products/rudder-pins-hobie-14-hobie-16-nylon 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie_Nylon_rudder_pins.png?v=1744839048 H-14/16 NYLON RUDDER PINS PR Rudder Pins H14/16 Pair (Nylon) Murrays Part# 001-2271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. Pair of 3/8" x 8" rudder pins with cotter pins for Hobie® 14 or Hobie® 16. Each pair is equivalent to two Hobie Cat® item #10881000 Sold in pairs https://murrays.com/products/rudder-pins-nacra-prindle-h21-aluminum 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Nacra_prindle_Hobie_21_Aluminum_rudder_pins.jpg?v=1744836750 NACRA/PRINDLE AND H21 ALUMINIUM RUDDER PIN Rudder Pin Nacra, Prindle and H21 (Aluminum) Murrays Part# 001-5272 Aluminum rudder pins for Nacra, Prindle and Hobie® 21 measure 3/8" x 10-1/4" end-to-end, with hole at each end. Cotter pins are included. Sold in pairs https://murrays.com/products/rudder-pins-hobie-14-hobie-16-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-2269.jpg?v=1741622746 H-14/16 RUDDER PINS PR (STAINLESS) H14/16 Rudder Pins Stainless Steel Murrays Part# 001-2269 Weight-saving, hollow stainless rudder pins for Hobie® 14 or Hobie® 16 with stronger .065" wall provide reduced wear and the best long-term fit. This kit includes one pair of 3/8" x 8" rudder pins with cotter pins. New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be diff https://murrays.com/products/rudder-pins-hollow-stainless-for-h17-h18-h20 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-4274_Aluminum_Hobie_17_-_18_rudder_pins.jpg?v=1714141788 H-17/18 RUDDER PINS PR (SS) Rudder Pins H17/18 Stainless Steel Murrays Part# 001-4273 Weight-saving compared to solid stainless steel pins, hollow stainless rudder pins with still beefy .065″ wall provide reduced wear and the good long-term durability. The universal stainless steel 3/8″ x 9-1/4″ rudder pins are suited for; Hobie 17/18/20 rudder castings. Also used on older Hobie Wave and Getaways with metal rudder castings. Cotter pins are included. Alternative to Hobie Cat® #60880011.  (* Pre EZ LOC Rudder c https://murrays.com/products/rudder-return-heavy-duty-shock-cord-hobie-14-hobie-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2240.jpg?v=1676950291 H-14/16 RUDDER RETURN HAND SHOCK CORD H14/16 Rudder Return Hand Shock Cord Murrays Part# 001-2240 Two 32" shock cords with balls keep your Hobie® 14 or 16 rudders down when the cams don't! Order Kisme Kleets #05-1010 separately, if needed. https://murrays.com/products/rudder-pins-nacra-prindle-h21-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/4522_Nacra_Prindle_Hobie_21_Stainless_Rudder_Pin.jpg?v=1744839670 NACRA/PRINDLE AND H21 SS RUDDER PIN Rudder Pin Nacra, Prindle and H21 Stainless Steel Murrays Part# 001-5273 Long-wearing, weight-saving, hollow stainless rudder pins with strong, .065" wall provide reduced wear and the best long-term fit. These rudder pins measure 3/8" x 10-1/4" end-to-end with a hole at each end. They will fit Nacra, Prindle and Hobie® 21. Cotter pins are included. These pins are a replacement for Hobie® factory item #40880011 (sold individually). Sold in pairs https://murrays.com/products/rudder-return-kit-for-h14-16-inter 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-2049.jpg?v=1676950293 H-14/16 INTER RUDDER RETURN KIT Rudder Return Kit for H14/16-Inter Murrays Part# 012-2049 This Rudder Return Kit for H14/16-Inter by Tren Tec eliminates kick-up. Rudders return to down position easily with one hand and tension holds rudder down if a cam fails. Accommodates both rudders. Use this page to order product numbers 12-2049 (for Hobie® 14/16/Inter; Hobie Cat® item #1544)) and 12-2059 (for Hobie 17/18/21) https://murrays.com/products/rudder-stiffening-spacer 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0053.jpg?v=1676950294 RUDDER STIFFENING SPACER Murrays PN 001-0053 The Murrays Rudder Stiffening Spacer is a 2" diameter spacer for use on Hobie, Nacra and Prindle catamarans to eliminate excessive clearances between rudders and castings which cause rudder slop, side to side wobble, and thwart rudder alignment. A kit with spacers and nuts is also available (#01-2053).  The Murrays Rudder Stiffening Spacer are quite thin so that you can achieve a perfect fit. Standard kits come with 8 spacers. https://murrays.com/products/rudder-stiffening-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2053.jpg?v=1676950295 RUDDER STIFFENING KIT Rudder Stiffening Kit Murrays Part# 001-2053 The Rudder Stiffening Kit for all Hobies eliminates excessive clearances between rudders and castings which cause wobble and thwart rudder alignment. Kit has 4 stainless nylock nuts and 8 spacers. Compare to Hobie Cat® item #136. https://murrays.com/products/safety-pin-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0126_5010ef19-476c-46a3-b238-0712c74a7768.jpg?v=1676950296 SAFETY PIN STAINLESS STEEL Safety Pin Stainless Steel Murrays Part# 21-0126 The stainless steel safety pin is an alternative to the split ring, spring clip or cotter pin. Hobie Cat® Part# 20503 https://murrays.com/products/sail-hc-logos-you-cut-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/U-cutHobielogo.jpg?v=1745606456 SAIL "HC" LOGO U-CUT PR BLACK https://murrays.com/products/sail-pocket-protector-kit-main 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1001.jpg?v=1676950297 MAIN SAIL POCKET PROTECTOR KIT Hobie Cat #80550005 Main sail batten pocket protector kit. Hobie, Nacra, Prindle. https://murrays.com/products/sail-pocket-protector-kit-jib 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1002.jpg?v=1676950300 JIB SAIL POCKET PROTECTOR KIT Sail Pocket Protector Kit Jib Murrays Part# 001-1002 The Jib Sail Pocket Protector Kit includes one pair of tough nylon protectors with indentations for included rivets that are set with a hammer. https://murrays.com/products/sail-repair-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1665.jpg?v=1676950300 SAIL REPAIR KIT Sail Repair Kit Murrays part# 007-1665 The Sail Repair Kit by Hobie Cat® keeps you prepared for emergency repairs to sails and trampolines. Includes 3 different weights of thread, 3 sizes of needles and an approximately 6" x 6" patch of white sail cloth. Hobie Cat® factory item #1665. https://murrays.com/products/sailors-all-purpose-tool-ssi 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0005.jpg?v=1676950302 SAILORS ALL PURPOSE TOOL (SSI) Sailors All Purpose Tool (SSI) Murrays Part# 001-0005 The sailor's all-purpose stainless tool is a wrench that fits nuts for 1/4" and 5/16" bolts and it's also a cam remover, screwdriver, bottle opener and shackle tool. It also helps with shackle pins and drain plugs. Hobie Cat® Part# 83103 https://murrays.com/products/screw-fhms-8-32-x-1-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1517_fa841936-389c-4da4-a239-56d3d2489662.jpg?v=1676950303 SCREW FHMS #8-32 X 1" (SS) Screw FHMS #8-32 X 1"Stainless Steel Murrays Part# 19-1517 Stainless steel #8-32 x 1" flat head screw can be used for port installation. Compare to Hobie Cat® Part# 8031231 https://murrays.com/products/screw-fhms-10-32-x-1-00-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1518_3bb3a8b0-cefa-435f-9d91-9b205b803d5d.jpg?v=1676950304 SCREW FHMS #10-32 X 1.00" (SS) Screw FHMS #10-32 X 1.00 Stainless Steel Murrays Part# 19-1518 https://murrays.com/products/screw-fhms-6-32-x-1-2-brass 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1510.jpg?v=1676950304 SCREW FHMS #6-32 X 1/2" (BRASS) FHMS #6-32 X 1/2 (Brass) Murrays Part# 19-1510 Flat head #6-32 x 1/2" brass machine screw fits Pocket Protector kits #01-1001 and #01-1002. https://murrays.com/products/screw-fhms-8-32-x-3-4-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1516.jpg?v=1676950305 SCREW FHMS #8-32 X 3/4" (SS) Screw FHMS #8-32 X 3/4 Stainless Steel Murrays Part# 19-1516 Stainless steel flat head #8-32 x 3/4" machine screw. https://murrays.com/products/screw-fhsms-10-x-1-50-stainlesss-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1626.jpg?v=1676950308 SCREW FHSMS #10 X 1.50" (SS) Screw FHSMS #10 X 1.50 Stainless Steel Murrays Part# 19-1626 Flat head, self-tapping, #10 x 1.50" stainless steel sheet metal screw. https://murrays.com/products/screw-fhms-8-32-x-3-8-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1515.jpg?v=1676950307 SCREW FHMS #8-32 X 3/8" (SS) Screw FHMS #8-32 X 3/8 (Stainless Steel) Murrays Part# 19-1515 Stainless steel flat head #8-32 x 3/8" machine screw https://murrays.com/products/screw-fhsms-12-x-3-4-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1625.jpg?v=1676950308 SCREW FHSMS #12 X 3/4" (SS) Screw FHSMS #12 X 3/4 Stainless Steel Murrays Part# 19-1625 Flat head, self-tapping, stainless steel #13 x 3/4" sheet metal screw. https://murrays.com/products/screw-fhms-8-32-x-1-25-nylon 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1520.jpg?v=1676950309 SCREW FHMS #8-32 X 1.25" (BLACK NYLON) Screw FHMS #8-32 X 1.25 (Nylon) Murrays Part# 19-1520BK Nylon #8-32 x 1.25" flat head screw for installation of ports. Available in black or white. https://murrays.com/products/screw-fhsms-6-x-1-2-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1610_a97a20dc-91b9-42ed-92b0-d0c78310baa6.jpg?v=1676950312 SCREW FHSMS #6 X 1/2" (SS) FHSMS #6 X 1/2 Stainless Steel Murrays Part# 19-1610 Flat head self-tapping #6 x 1/2" sheet metal screw can be used to attached lance cleats. https://murrays.com/products/screw-fhsms-8-x-1-50-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1622.jpg?v=1676950312 SCREW FHSMS #8 X 1.50" (SS) Screw FHSMS #8 X 1.50 Stainless Steel Murrays Part# 19-1622 Flat head, self-tapping, #8 x 1.5" stainless steel sheet metal screw is used to mount Harken Micro Cam-Matic cleats (need 2). https://murrays.com/products/screw-ohsms-10-x-3-4-stainless-steel-phillips-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3225.jpg?v=1676950312 SCREW OHSMS #10 X 3/4" (SS) Screw OHSMS #10 X 3/4" Stainless Steel Murrays Part# 19-3225 Stainless steel #10 x 3/4" oval Phillips head, self-tapping sheet metal screw. https://murrays.com/products/screw-fhsms-8-x-1-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1620.jpg?v=1676950314 SCREW FHSMS #8 X 1" (SS) FHSMS #8 X 1 Stainless Steel Murrays Part# 19-1620 Flat head, self-tapping, stainless steel #8 x 1" sheet metal screw. This screw is commonly used to hold the track endcaps on pre 1997 H16 Jib Traveler Tracks and all H18 Jib Traveler Tracks. Can screw into aluminum or fiberglass. https://murrays.com/products/screw-phms-10-24-x-3-8-stainless-steel-phillips-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3010.jpg?v=1676950316 SCREW PHMS #10-24 X 3/8" (SS) Screw PHMS #10-24 X 3/8 (Stainless Steel) Phillips Head Murrays Part# 19-3010 Stainless steel, Phillips pan head #10-24 x 3/8" machine screw. https://murrays.com/products/screw-phms-10-32-x-1-stainless-steel-slot-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2915.jpg?v=1676950316 SCREW PHMS #10-32 X 1" (SS) Screw PHMS #10-32 X 1 Stainless Steel Slot Head Murrays Part# 19-2915 Stainless steel, pan head #10-32 x 1" machine screw with slot is used as dolphin striker screw on all Prindles. Replaces Murrays item #56-F112. Also used in some Hobie Applications, compare to 8030111 Hobie Part. Applications: H18/18 SX/16 and Getaway Tiller Hinge Screw: 2 https://murrays.com/products/screw-phms-10-24-x-1-50-stainless-steel-phillips-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3011.jpg?v=1676950316 SCREW PHILLIPS HEAD #10-24 X 1.50 (SS) Screw Phillips Head Montel Steel #10-24 X 1.50 Murrays Part# 19-3011 Stainless steel, Phillips pan head #10-24 x 1-1/2" machine screw. https://murrays.com/products/screw-phms-10-32-x-2-stainless-steel-phillips-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2918.jpg?v=1676950318 SCREW PHMS #10-32 X 2" (SS) Screw PHMS #10-32 X 2" Stainless Steel Murrays Part# 19-2918 Stainless steel, #10-32 x 2" Phillips pan head machine screw. Mainsheet block replacement screw. Also used to mount Harken Cam-Matic cleats #28-0150 and #28-0365 (needs 2 screws). https://murrays.com/products/screw-phms-10-32-x-5-8-stainless-phillips-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2910.jpg?v=1676950320 SCREW PHMS #10-32 X 5/8 (SS) Screw PHMS #10-32 X 5/8" Stainless Steel Murrays Part# 19-2910 Stainless steel, pan Phillips head, #10-32 x 5/8" machine screw. https://murrays.com/products/screw-phms-6-32-x-7-8-brass 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2905.jpg?v=1676950320 SCREW PHMS #6-32 X 7/8" (BRASS) PHMS #6-32 X 7/8 (Brass) Murrays Part# 19-290 Brass, pan head #6-32 x 7/8" machine screw. https://murrays.com/products/screw-phms-10-32-x-7-8-stainless-steel-slot-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2916.jpg?v=1676950320 SCREW PHMS #10-32 X 7/8" (SS) Screw PHMS #10-32 X 7/8" Stainless Steel Murrays Part# 19-2916 Stainless steel #10-32 x 7/8" machine screw has pan head with slot https://murrays.com/products/screw-phms-1-4-20-x-1-slot-head-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3020.jpg?v=1676950322 1/4-20 X 1" Stainless Steel Screw Screw PHMS 1/4-20 X 1" Stainless Steel Murrays Part# 19-3020 Stainless steel, slotted pan head 1/4-20 x 1" machine screw to fasten mast bearing on pre-1990 Hobie® 18. Other uses include universal Prindle/Nacra bow plate and bow tang on Prindle 15/16/18/Escape. Replaces Murrays item #56-F125. https://murrays.com/products/screw-phsms-10-x-3-4-stainless-steel-phillips-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3210.jpg?v=1676950323 SCREW PHSMS #10 X 3/4" (SS) Screw PHSMS #10 X 3/4 Stainless Steel Phillips Head Murrays Part# 19-3210 Stainless steel, Phillips pan head, #10 x 3/4" self-tapping sheet metal screw. https://murrays.com/products/screw-phsms-10-x-1-stainless-steel-phillips-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3211.jpg?v=1676950324 SCREW PHSMS #10 X 1" (SS) Screw PHSMS #10 X 1" Stainless Steel Murrays Part# 19-3211 Stainless steel Phillips pan head, self-tapping #10 x 1" sheet metal screw is used for installation of footstrap inserts. https://murrays.com/products/screw-phsms-10-x-1-2-stainless-steel-phillips-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3209.jpg?v=1676950324 SCREW PHSMS #10 X 1/2" (SS) Screw PHSMS #10 X 1/2 Stainless Steel Philips Head Murrays Part# 19-3209 Stainless steel, Phillips pan head #10 x 1/2" self-tapping sheet metal screw. https://murrays.com/products/screw-phsms-12-x-1-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3220.jpg?v=1676950326 SCREW PHSMS #12 X 1" (SS) Screw PHSMS #12 X 1" Stainless Steel Murrays Part# 19-3220 Stainless steel, pan head, self-tapping #12 x 1" sheet metal screw. https://murrays.com/products/screw-phsms-12-x-3-4-stainless-steel-phillips-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3230.jpg?v=1676950327 SCREW PHSMS #12 X 3/4" (SS) Screw PHSMS #12 X 3/4 Stainless Steel Phillips Head Murrays Part# 19-3230 Stainless steel, Phillips pan head, #12 x 3/4" self-tapping sheet metal screw https://murrays.com/products/screw-phsms-8-x-1-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1619.jpg?v=1676950328 SCREW PHSMS #8 X 1" (SS) Screw PHSMS #8 X 1" (Stainless Steel) Murrays Part# 19-1619 Pan head, self-tapping, stainless steel #8 x 1" sheet metal screw https://murrays.com/products/screw-phsms-4-x-3-8-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1615-1_56bed88e-8a78-4d0e-9f5f-86323aaf0aa5.jpg?v=1737479914 SCREW PHSMS #4 X 3/8" (SS) Screw PHSMS #4 X 3/8 Stainless Steel Murrays Part# 19-1615 Stainless steel, pan head, self-tapping #4 x 3/8" sheet metal screw. https://murrays.com/products/screw-phsms-8-x-2-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1624.jpg?v=1676950330 SCREW PHSMS #8 X 2" (SS) Screw PHSMS #8 X 2" Stainless Steel Murrays Part# 19-1624 Stainless steel, pan head, self-tapping, #8 x 2" sheet metal screw https://murrays.com/products/screw-rhms-10-24-x-1-stainless-steel-phillips-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3511.jpg?v=1676950332 SCREW RHMS #10-24 X 1" (SS) Round Head Machine Screw #10-24 X 1 Stainless Steel Phillips Head https://murrays.com/products/screw-rhms-10-24-x-1-1-8-stainless-steel-phillips-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3012.jpg?v=1676950332 SCREW RHMS #10-24 X 1-1/8 (SS) Screw RHMS #10-24 X 1-1/8" Stainless Steel Murrays Part# 19-3012 Stainless steel, Phillips round head #10-24 x 1-1/8" machine screw https://murrays.com/products/screw-phsms-8-x-1-50-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-1623.jpg?v=1676950332 SCREW PHSMS #8 X 1.50" (SS) Screw PHSMS #8 X 1.50" (Stainless Steel) Murrays Part# 19-1623 Stainless steel, pan head, self-tapping, #8 x 1.5" sheet metal screw https://murrays.com/products/screw-rhms-10-24-x-7-8-stainless-steel-phillips-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3510.jpg?v=1676950334 SCREW RHMS #10-24 X 7/8" SS Screw RHMS #10-24 X 7/8 Stainless Steel Phillips Head Murrays Part# 19-3510 Stainless steel, Phillips round head #10-24 x 7/8" machine screw https://murrays.com/products/screw-rhms-10-32-x-1-2-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3507.jpg?v=1676950336 SCREW RHMS #10-32 X 1/2" (SS) Screw RHMS #10-32 X 1/2 Stainless Steel Murrays Part# 19-3501 Stainless steel, round head #10-32 x 1/2" machine screw. Measurements are diameter and threads per inch times grip length. https://murrays.com/products/screw-rhms-10-32-x-3-4-stainless-steel-slot-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-2912-1.jpg?v=1676950336 SCREW RHMS #10-32 X 3/4 (SS) Screw RHMS #10-32 X 3/4 Stainless Steel Slot Head Murrays Part# 19-2912 Stainless steel slotted round head #10-32 x 3/4" machine screw is used on windsurfing fins. https://murrays.com/products/screw-rhms-10-32-x-7-8-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3500.jpg?v=1676950336 SCREW RHMS #10-32 X 7/8 (SS) Screw RHMS #10-32 X 7/8 Stainless Steel Murrays Part# 19-3500 Stainless steel, round head #10-32 x 7/8" machine screw. Measurements are diameter and threads per inch times grip length. https://murrays.com/products/screw-rhms-5-16-18-x-1-25-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3530.jpg?v=1676950338 SCREW RHMS 5/16-18 X 1.25 (SS) Screw RHMS 5/16-18 X 1.25" Stainless Steel Murrays Part# 19-3530 Stainless steel round head machine screw measures 5/16-18 x 1-1/4". Bow Tang Bolt Equivalent to Hobie Cat® Part# 8030301 https://murrays.com/products/screw-rhms-12-24-x-1-25-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3520.jpg?v=1676950340 SCREW RHMS #12-24 X 1.25 (SS) Screw RHMS #12-24 X 1.25 Stainless Steel Murrays Part# 19-3520 Stainless steel, round head #12-24 x 1.25" machine screw is a replacement screw for Hobie® rudder gudgeon. https://murrays.com/products/screw-rhsms-10-x-1-25-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3710.jpg?v=1676950340 SCREW RHSMS #10 X 1.25" (SS) Screw RHSMS #10 X 1.25" Stainless Steel Murrays Part# 19-3710 Round head self-tapping #10 x 1.25" stainless steel sheet metal screw. https://murrays.com/products/screw-rhms-1-4-20-x-1-2-stainless-steel-phillips-head 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3019.jpg?v=1676950340 SCREW RHMS 1/4-20 X 1/2" (SS) Screw RHMS 1/4-20 X 1/2" Stainless Steel Murrays Part# 19-3019 Stainless steel, Phillips pan head 1/4-20 x 1/2" machine screw is used to fasten mast bearing on post-1990 Hobie® 18. Compare to Hobie 8032011 https://murrays.com/products/screw-rhsms-10-x-2-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3713.jpg?v=1676950342 SCREW RHSMS #10 X 2 (SS) Screw RHSMS #10 X 2 (Stainless Steel) Murrays Part# 19-3713 Round head, self-tapping #10 x 2" stainless steel sheet metal screw. https://murrays.com/products/screw-rhsms-10-x-1-50-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3711.jpg?v=1676950344 SCREW RHSMS #10 X 1.50 (SS) Screw RHSMS #10 X 1.50" Stainless Steel Murrays Part# 19-3711 Round head self-tapping #10 x 1.50" stainless steel sheet metal screw https://murrays.com/products/screw-rhsms-10-x-2-50-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-3714.jpg?v=1676950344 SCREW RHSMS #10 X 2.50" (SS) Rhsms #10 X 2.50 Stainless Steel Murrays Part# 19-3714 Round head, self-tapping #10 x 2.5" stainless steel sheet metal screw https://murrays.com/products/shackle-bow-3-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/ronstan-shackle-bow-1-4.jpg?v=1676950344 RONSTAN 3/16" BOW SHACKLE Ronstan Stainless Steel Bow Shackle, 3/16" Pin, Coined Head Murrays Part# 21-0634 Solid stainless steel bow shackle has 3/16" diameter pin.  UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin. https://murrays.com/products/shackle-d-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0616.webp?v=1718915824 RONSTAN 1/4" D SHACKLE Ronstan Stainless Steel D Shackle, 1/4" Murrays Part# 21-0617 UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin. Ronstan solid stainless steel shackle has 1/4" pin diameter. Having a spare on hand may mean the difference between sailing or not! https://murrays.com/products/shackle-bow-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Ronstan_.25_inch_Bow_Shackle_RF635H.jpg?v=1744045823 RONSTAN 1/4" BOW SHACKLE https://murrays.com/products/shackle-d-3-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0616_Ronstan_3_16_D_Shackle.jpg?v=1752770245 RONSTAN 3/16 D SHACKLE Ronstan Stainless Steel D Shackle, 3/16" Pin, Slotted Head Murrays Part# 21-0616 Ronstan stainless D shackle has 3/16" diameter pin. This shackle is a substitute for Hobie® item #11220000, #SP0051 and #SP0052. https://murrays.com/products/shackle-d-5-32-slot-head-pin 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0615_1bca7ad7-6def-4a71-95aa-16cbc847426e.jpg?v=1744308164 RONSTAN STAINLESS STEEL D SHACKLE, 5/32" PIN, SLOTTED HEAD Ronstan Stainless Steel D Shackle, 5/32" Pin, Slotted Head Murrays Part# 21-0615 Ronstan stainless D shackle has 5/32" slot head pin. Features: High strength to weight ratio Premium quality, rated Grade 316 stainless steel bodies and pins https://murrays.com/products/shackle-pin-only-1-4-threaded 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0033_c9ce5e8c-d8e1-4676-8260-3767f196ba31.jpg?v=1676950350 SHACKLE PIN ONLY 1/4" THREADED Shackle Pin Only 1/4 Threaded Murrays Part# 21-0033 Threaded stainless pin fits 1/4" Ronstan D or bow shackle. https://murrays.com/products/shackle-long-d-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0623.webp?v=1718916055 RONSTAN STAINLESS STEEL LONG D SHACKLE, 1/4" PIN, COINED HEAD Ronstan Stainless Steel Long D Shackle, 1/4" Pin, Coined Head Murrays Part# 21-0623 This stainless steel long D-shackle has a 1/4" diameter pin. Great for adding replacing the clevis pin on your H18 bridles for a spinnaker project. https://murrays.com/products/shackle-pin-only-3-16-threaded 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0032_e67250b1-709e-4c1f-9497-9118780bdee3.jpg?v=1676950352 SHACKLE PIN ONLY 3/16" THREADED Shackle Pin Only 3/16 Threaded Murrays Part# 21-0032 Threaded stainless pin fits 3/16" Ronstan D or bow shackle. https://murrays.com/products/shackle-short-halyard-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-9343.jpg?v=1676950352 1/4" SHORT HALYARD SHACKLE 1/4" Short Halyard Shackle Murrays Part# 22-9343 1-7/32" long with fixed guard pin and spring-loaded 1/4" captive pin. Maximum working load is 1550 lbs. https://murrays.com/products/shackle-twisted-d-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0628_9e694df3-11a6-4208-9072-fad150515121.webp?v=1718916984 RONSTAN STAINLESS STEEL TWISTED D SHACKLE, 1/4" PIN, COINED HEAD Ronstan Stainless Steel Twisted D Shackle, 1/4" Pin, Coined Head Murrays Part# 21-0629 Ronstan's twisted D shackle is constructed of 316 stainless steel and has a 1/4" pin. PL breaking load is 3090 lb.; UDL breaking load is 5070 lb. Weighs 1.1 oz. https://murrays.com/products/shackle-twisted-d-3-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0628.webp?v=1718916837 RONSTAN 3/16" TWISTED D SHACKLE Ronstan 3/16 Twisted D Shackle Murrays Part# 21-0628 Stainless steel twisted D-shackle has a 3/16" pin. https://murrays.com/products/sidewinder-becket 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/05-0701.jpg?v=1676950360 SIDEWINDER BECKET Sidewinder Becket Murrays Part# 005-0701 Add on becket for classic Harken Mainsheet systems. The sidewinder becket is for older Harken 2.25" or 3.00" triple blocks. It enables extra purchase ratio without sacrificing low profile block stacking. Some drilling is required for installation. https://murrays.com/products/shroud-tensioner-de-tensioner 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1060.jpg?v=1676950360 SHROUD TENSIONER/DE-TENSIONER SHROUD TENSIONER https://murrays.com/products/sister-clip-micro 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/04-7730.jpg?v=1676950361 SISTER CLIP MICRO (EA) Sister Clip Micro  Murrays Part# 004-7730 The stainless steel micro sister clip is a quick connector with no moving parts. The micro sister clip does not have a slot. https://murrays.com/products/single-shank-ball-stop-3-32 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1039.jpg?v=1676950362 SINGLE SHANK BALL STOP 3/32" https://murrays.com/products/sister-clip-mini 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0536.webp?v=1718914893 RONSTAN 24MM SISTER CLIP (EACH) Ronstan 24mm Sister Clip Murrays Part# 21-0536 Stainless steel mini sister clip is a quick connector with no moving parts. Sister clip, 7mm (9/32") eye clearance. Effective means of quickly attaching and detaching ropes https://murrays.com/products/small-block-with-removable-sheave 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/23-0912.jpg?v=1736274130 SMALL BLOCK WITH REMOVABLE SHEAVE SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103 https://murrays.com/products/small-bullet-block-mini 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/23-0911.jpg?v=1676950365 MINI BULLET BLOCK Mini Bullet Block Murrays Part 23-0911 As used in the Murrays No-Cut EZ-Up Trap Ring Return Kit. Mini bullet block has 1-3/16" sheave, Teflon® bearing and 5/16" line capacity. Hobie Cat® uses #3103 for this block. https://murrays.com/products/small-fairlead-1-1-4-x-1-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/23-0921.jpg?v=1676950366 RONSTAN SMALL FAIRLEAD: 1-1/4 X 1/2 Small Fairlead: 1-1/4 X 1/2 Murrays Part# 23-0921 Stainless steel fairlead measurements: A = 1-1/4" (31.4mm) between holes center-to-center B = 1/2" (12.7mm) height C = 3/16" (5mm) hole diameter https://murrays.com/products/snap-hook-1-bronze 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-3461.jpg?v=1676950368 SNAP HOOK #1 (BRONZE) Snap Hook #1 (Bronze) Murrays Part# 27-3461 Die cast manganese bronze snap hook measures 2-7/8" overall with 11/16" diameter hole and 1/4" opening. Weight: .05 lb. https://murrays.com/products/snap-shackle-with-swivel-eye 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-4521.jpg?v=1739291580 SNAP SHACKLE WITH SWIVEL EYE Snap Shackle with Swivel Eye Murrays Part# 22-4521 2-3/4" long stainless steel snap shackle with swivel eye has 1/2" diameter eye. SWL 1000 lbs. Weighs 2.4 oz. https://murrays.com/products/snap-shackle-with-tack-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/pro_20151224170453T8S764g1xT.jpg?v=1739235356 SNAP SHACKLE WITH TACK 1/4" Snap Shackle With Tack 1/4" Murrays Part# 22-4501 Swiveling tack shackle with 1/4" clevis pin. Use on hexaratchets on Hobie® 18, Nacra or Prindle. To connect the swivel shackle to an item that requires a 3/16" clevis pin, you will need a 3/16" clevis pin with 7/8" shaft. Also convenient for the jib tack connection on Nacras and Inters. https://murrays.com/products/snapper-pin-3-8-x-2-square 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-9830.jpg?v=1676950371 3/8" X 2" SQUARE SNAPPER PIN 3/8" X 2" Square Snapper Pin Murrays Part# 22-9830 Plated steel snapper pin measures 3/8" diameter x 2" grip length (shoulder to the keeper). The quick release bail is easy to release, but very secure when engaged. Used in our trailer mounted mast support. https://murrays.com/products/sol-cat-18-bridle-1-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Bridle_BK_d25f2da2-1e9f-48c8-a11e-892ccfff6c27.jpg?v=1676950372 SOL-18 BRIDLE 1/8" WHITE WIRE https://murrays.com/products/sol-cat-18-main-halyard-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-2274-00_47_SOL-18_MAIN_HALYARD_W_SHACKLE_Main_halyard_for_a_18_Sol_Cat_catamaran..jpg?v=1734041270 SOL-18 MAIN HALYARD WITH SHACKLE SOL-18 MAIN HALYARD W/SHACKLE Main halyard for a 18' Sol Cat catamaran. https://murrays.com/products/sol-cat-18-trapeze-wires-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Black_Single_Trap_22d94101-c472-4ab4-9f78-f8417122acda.jpg?v=1729613576 SOL-18 TRAPEZE WIRES (2) Hobie Sol Cat 18 Trapeze Wires (2 Handles) Trapeze Wire set for single trapeze. Use this page to order product numbers: 002-6253-01 002-6253-02 https://murrays.com/products/spare-parts-kit-h14-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3221_2.jpg?v=1676950379 H-14/16 SPARE PARTS KIT: Hobie 16 spare parts kit, shackle tool, drain plugs, rudder pins, clevis pins and rings, 3/16" bow shackle, 1/4" bow shackle, batten tie strings, and 3 mast bearings. Pouch comes in assorted colors as available. Hobie #30305 and #30306. https://murrays.com/products/spare-parts-kit-nacra 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-8221-2011.jpg?v=1676950380 NACRA SPARE PARTS KIT Spare Parts Kit: Nacra Murrays Part# 001-8221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit contains the most frequently lost and needed items for your Nacra catamaran. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Newer Nacras use pintles instead of rudder pins, so the included rudder pins are not https://murrays.com/products/spare-parts-kit-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie_18_spare_parts_kit.jpg?v=1715122550 H-18 SPARE PARTS KIT: Spare Parts Kit: H18 Murrays Part# 001-4221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit for Hobie® 18 contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Compare to Hobie Cat® #30307. https://murrays.com/products/spare-parts-kit-prindle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-5221-2011A.jpg?v=1676950381 PRINDLE SPARE PARTS KIT Prindle Spare Parts Kit Murrays Part# 001-5221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, the Murrays Spare Parts Kit contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie line. Pouch comes in assorted colors as available. https://murrays.com/products/split-ring-3-16-1-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9492_2.jpg?v=1718812114 3/16-1/4" SPLIT RING 3/16 - 1/4" Split Ring Murrays Part# 22-9492 Stainless steel split ring (ring ding) for 3/16″-1/4″ diameter clevis pin. This is the standard size Hobie split ring used all over the boats, most commonly on the shrouds, forestay and roller furler Medium Split ring Dimensions: 5/8″ Diameter Material: 316 Stainless steel. This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. 20860000 Medium Clevis Ring. https://murrays.com/products/split-ring-1-4-with-pigtail 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9491.jpg?v=1718812176 3/16 - 1/4" SPLIT RING WITH PIGTAIL 3/16 - 1/4" Split Ring with Pigtail Murrays Part# 22-9491 A pigtail makes this split ring (ring ding) easier to open than standard split rings. For use on 3/16″ – 1/4″ clevis pins Material: 316 Stainless steel. Medium Split ring Dimensions: 5/8″ Diameter This is the most common size Split ring on Hobie, Nacra and Prindle Catamarans. Applications: All Hobies Shroud and Forestay split ring H18/ Hobie 18 SX – Tiller Yoke Clevis Pin Ring Also called Ring Ding, Clevis Ring, Cotter Ring or Ringy Ding https://murrays.com/products/spreader-covers-hobie 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-3262.jpg?v=1676950385 HOBIE SPREADER COVERS Hobie Spreader Covers Murrays part# 007-3262 These vinyl spreader bar end covers are real sail-savers! The black, smooth resilient covers protect the jib luff from wear and tear from cotter keys and sharp edges. Pair. Hobie Cat® factory item #3262. https://murrays.com/products/split-ring-5-16-3-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/22-9493_2.jpg?v=1718812233 3/4" SPLIT RING Split Ring Stainless steel split ring for 5/16″-3/8″ diameter clevis pins. The larger size makes it easier to get on and off. Large Split ring Dimensions: 3/4″ Diameter Material: 316 Stainless steel. Also called Ring Ding or Ringy Dingy. Hobie Part number 20860010 – RF686 https://murrays.com/products/spring-1-4-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-0060.jpg?v=1754582763 SPRING 1/4" (SS) Spring 1/4" Stainless Steel Murrays.com Part# 001-0060 1/4" stainless steel spring as used in the Murrays Tiller Connection Kit (#01-2061) This spring fits on a 1/4 bolt. Specs: 1/2" Long x 3/8" OD https://murrays.com/products/stand-up-spring-conical-medium 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0320_305bd687-f88a-4ad0-8cdd-f54a9bcef55d.jpg?v=1676950390 STAND UP SPRING CONICAL MEDIUM Stand Up Spring Conical Medium Murrays Part# 21-0320 This medium conical stand-up spring is used for Oxen blocks, OK car, etc. https://murrays.com/products/spring-clip-1-4-5-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Spring_Clip_1_4-5_16.jpg?v=1784223005 SPRING CLIP 1/4 - 5/16" Spring Clip 1/4-5/16" Murrays Part# 25-2204 Use this 316 stainless spring clip for quick rudder pin removal or on 1/4" to 5/16" pins. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie 14, 16, 17, 18, 20, Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape. https://murrays.com/products/stand-up-spring-conical-light 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0319_788de492-133a-4149-b4d2-c12f5e3d6e8e.jpg?v=1744238127 STAND UP SPRING CONICAL LIGHT Stand Up Spring Conical Light Murrays Part# 21-0319 This soft, conical spring is used for Harken bullet block (e.g. Hobie® 16 jib traveler car and Hobie® spinnaker pole blocks). https://murrays.com/products/spring-clip-3-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/HOBIE_RUDDER_PIN_SPRING_CLIP_3_8.jpg?v=1784222943 RUDDER PIN SPRING CLIP: 3/8 RUDDER PIN SPRING CLIP: 3/8 The 3/8 spring clip is a quick release pin for rudder pins on all Hobie, Nacra and Prindle Catamarans. Ideal for sailors who trailer their boats and remove their rudder castings. https://murrays.com/products/staymaster-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1043.jpg?v=1676950394 STAYMASTER TURNBUCKLE 3/32 The Staymaster Turnbuckle - No more hit-and-miss wire tensioning! Shorten your diamond wires and use an adjustable tension mechanism to easily repeat tension settings https://murrays.com/products/stop-sleeve 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/download_f7737576-246d-4326-9220-2b26490f0ac1.jpg?v=1733418995 STOP SLEEVE 3/32" Stop Sleeve 3/32" Murrays Part# 002-1031 A stop sleeve grips a single wire to provide a "stop" for halyard hooks or trapeze handle, etc. A special "J" size opening on a nicropress tool is required for closing 3/32" and 1/8" stops; 5/32" stop requires "M" opening. Use this page to order item numbers 02-1031 3/32", 02-1041 1/8", 02-1051 5/32" and 02-1061 3/16" stop sleeves. https://murrays.com/products/streamlined-replacement-urethane-tendon-1994-amp-up 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/1111.jpg?v=1676950416 REPL URETHANE TENDON 1994 & UP https://murrays.com/products/stretch-righting-h14-h16-h17-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-3294.jpg?v=1721232962 H-14/16/17/18 STRETCH RIGHTING STRETCH RIGHTING H14/16/17/18 Murrays Part# 001-3294 The Murrays Stretch Righting Kit is our most popular righting line kit for catamarans such as Hobie® 14, 16, 17, 18 and 18SX. If the bow starts to bury, the line is readily available to both skipper and crew who can anchor themselves to keep from being catapulted forward. This beautifully simple system features easy-to-grip, 1/2" hollow braid line with internal shock cord that stretches for righting or trapezing and then recoils automatically https://murrays.com/products/stud-3-32-right-hand-thread 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1036.jpg?v=1676950425 3/32 STUD10/32 RH THD 3/32 TURNBUCKLE STUD https://murrays.com/products/super-goose-h17-h18-h20-h21 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/12-4060_Supergoose.jpg?v=1717427882 H-17/18/20/21 SUPER GOOSE SUPER GOOSE H-17/18/20/21 This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing. The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model. Hobie part number 1510 https://murrays.com/products/stud-5-32-x-25-x-28-right-hand 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1052.jpg?v=1676950426 WIRE STUD RIGHT 5/32x1/4x28 https://murrays.com/products/swivel-with-aluminum-cam-and-bullseye 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3014_12dbb9c0-4b8b-4169-9845-2ba81f26cd91.jpg?v=1676950429 HEAVY DUTY SWIVEL WITH ALUMINUM CAM & BULLSEYE https://murrays.com/products/swivel-mount-base-with-fasteners 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1162.jpg?v=1676950430 PRINDLE SWIVEL MOUNT BASE WITH FASTENERS Swivel Mount Base with Fasteners Murrays Part# 007-1162 The offset base pad kit fits Hobie® and Prindle elliptical crossbars. Includes injection-molded plastic base and fasteners. Replacement fasteners are also available (requires 3 self-tapping screws #19-1620, 1 machine screw #19-1516, and 1 nut #19-2016). Hobie Cat® Part# 1162 https://murrays.com/products/swivel-with-carbo-cam-bullseye 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3010_c7c814d0-b445-4791-8e73-4db0086fe81b.jpg?v=1676950431 HEAVY DUTY SWIVEL WITH CARBO CAM & BULLSEYE Harken Swivel with Carbo Cam Bullseye Murrays Part# 25-3010 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads and flat head screws separately to mount to your front crossbar. https://murrays.com/products/swivel-with-bullseye-no-cleat 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/25-3011.jpg?v=1676950430 SWIVEL WITH BULLS-EYE (NO CLEAT) Swivel with Bulls-Eye (No Cleat) Murrays Part# 25-3011 This item includes the swivel with bullseye, but not the cleat. Swivel cam cleats (cleat sold separately) are ideal for main traveler control and up-release jib cleating systems. Order plastic base pads and fasteners separately. https://murrays.com/products/tear-aid-a-roll-3x30 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/tear_aid_roll.jpg?v=1676950435 TEAR-AID A ROLL (3"x30') Tear-Aid A Roll (3"x30') Murrays part# 010-3310-1 Tear-Aid Type A is the best-known kite and sail repair tape and it works on all kite canopy / sail materials: Dacron, mylar and ripstop nylon and kite bladders. Each package includes one foot of clear repair tape, alcohol pad and instructions. To use, clean area to be repaired with alcohol, cut patch to size, then peel and stick. https://murrays.com/products/tear-aid-kite-sail-repair-patch-3-x-12 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-3310.jpg?v=1676950438 TEAR-AID KITE/SAIL REPAIR PATCH (3x12") Tear-Aid Type A is the best-known kite and sail repair tape and it works on all kite canopy / sail materials: Dacron, mylar and ripstop nylon and kite bladders. Each package includes one foot of clear repair tape, alcohol pad and instructions. To use, clean area to be repaired with alcohol, cut patch to size, then peel and stick. https://murrays.com/products/telescoping-paddle-20-to-45 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-1303.jpg?v=1676950438 TELESCOPING PADDLE 20" TO 45" Telescoping Paddle 20" to 45" Murrays Part# 001-1303 Compact paddle power made tough for years of hard use. The paddle has a T-Grip handle and extends from 20" to 45". The bright orange blade doubles as a signaling device. Paddles are required by law in many states for small boats and personal watercraft. Hobie Cat® uses item #3091 for this paddle. https://murrays.com/products/telo-cat-bridle-vane 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/08-1450_2.jpg?v=1676950439 TELO-CAT BRIDLE VANE Telo-Cat Bridle Vane; Murrays Part# 008-1450 Designed especially to take the abuse of catamaran sailing, the Telo-Cat is durable and highly visible. It installs on the headstay bridle in seconds and is easily removed for trailering with no tools required. It comes complete with 8" vane, adjustable tacking arms and mounting hardware to fit most catamarans. The Telo-Cat is made of high-impact plastic with a stainless steel shaft and tacking arms. The vane rides on a super sensitive Teflon® bearing syst https://murrays.com/products/telo-cat-replacement-vane 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/08-1450A.jpg?v=1730309173 TELO-CAT REPLACEMENT VANE - DISCONTINUED Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings. https://murrays.com/products/telo-cat-hobie-vane-adapter-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/08-1451_2.jpg?v=1676950446 ROLLER FURLER BRIDLE VANE ADAPTER H18 Telo-Cat/Hobie Vane Adapter Murrays Part# 008-1451 Adapts the Telo-Cat (#08-1450) or Hobie® (#04-7703) vane to the Hobie 18 furling drum. When using to adapt a Telo-Cat vane for use on a Hobie 18, it is necessary to enlarge one hole in the plastic part of the vane to accommodate a clevis pin. Hobie Cat® Part# CM7705 https://murrays.com/products/thimble-1-16-3-32-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/21-0480_9338ca70-561c-44f5-a657-fe32dfcf34f5.jpg?v=1744238650 RONSTAN STAINLESS THIMBLE FOR 2.5MM (3/32") WIRE Thimble 1/16-3/32 Stainless Steel Ronstan's #481 thimble is used on Hobie 18 jib halyard, shrouds, forestays and trapeze wires. Constructed of grade 304 stainless steel. Weight: .1 oz. https://murrays.com/products/thimble-1-4-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0486.webp?v=1718908275 RONSTAN STAINLESS STEEL THIMBLE FOR 6MM (1/4") WIRE Ronstan Stainless Thimble for 6mm (1/4") Wire Murrays Part# 21-0486 Ronstan thimble for 1/4" wire is constructed of grade 316 stainless steel. https://murrays.com/products/thimble-3-32-1-8-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0034.jpg?v=1676950452 THIMBLE 3/32" - 1/8" (SS) Thimble 3/32" - 1/8" Stainless Steel Stainless Steel Light Duty Wire Rope Thimbles are designed to provide basic reinforcement and protection for wire rope loops in low-load applications. Light-duty thimbles are more compact and are used in situations where the rope is not subjected to extreme tension or heavy stress. Their purpose is to prevent wire rope loops from fraying, deforming, or wearing at the contact point, while maintaining the shape and integrity of the loop. Stainless Steel Light Duty W https://murrays.com/products/thimble-5-32-3-16-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/21-0484.webp?v=1718908046 RONSTAN STAINLESS THIMBLE FOR 5MM (3/16") WIRE Ronstan Stainless Thimble for 5mm (3/16") Wire Ronstan thimble is used on shrouds. Constructed of grade 316 stainless steel. Weight: .2 oz. https://murrays.com/products/third-hand 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-2040.jpg?v=1676950454 THIRD HAND Third Hand Murrays Part# 007-2040 This is the closest thing to "self-steering" a Hobie® 14 or 16. The handy little device grips the hiking stick and holds it at a position of your choice. Great for light air sailing or when paddling in if the wind dies. It also keeps the rudders from flopping around when on the beach. Attaches at each end of the traveler track. Hobie Cat® item #204. https://murrays.com/products/tie-down-h16-custom 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1793.jpg?v=1676950456 TIE DOWN H-16 CUSTOM Tie Down H16 Custom Murrays Part# 007-1793 Nice factory tie down kit for H16s, bolts to trailer and has hook and receiver for boat, slip hook into receptacle on boat, toggle the lever, and your boat is secure! https://murrays.com/products/tiger-diamond-wire-double-without-turnbuckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0795-20_7d6becfd-bc74-4004-9149-8cdf3936538c.jpg?v=1676950456 TIGER DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE Tiger Diamond Wire Double without Turnbuckle Murrays Part# 002-6095-20 Double diamond wire without turnbuckle for Hobie® Tiger is constructed to factory specifications. https://murrays.com/products/tiger-jib-halyard-with-shackle-roller-furling 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0786-00_3dc39a96-4bcb-431a-aaaa-d35d99eb4aba.jpg?v=1676950460 TIGER JIB HALYARD WITH SHACKLE ROLLER FURLING https://murrays.com/products/tiger-shroud-5-32-roller-swaged-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_RS_10807299-3a58-46ec-a7f8-085f6fc1a892.jpg?v=1676950460 TIGER SHROUD 5/32" ROLLER SWAGED BLACK WIRE Tiger Shroud 5/32" Roller Swaged Black Wire Murrays Part# 002-6005-12 Single black shroud for Hobie® Tiger is hydraulically swaged to be clean and strong. Constructed to factory specifications. Hobie® Part# 70792011 https://murrays.com/products/tiger-lower-forestay-roller-furling-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-5345-92.jpg?v=1676950460 TIGER LOW FORESTAY ROLLER FURLING 5/32- BLACK https://murrays.com/products/tiller-yoke-assembly-with-spacers 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0062_2.jpg?v=1676950464 TILLER YOKE ASSEMBLY WITH SPACERS Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1 https://murrays.com/products/tiger-upper-forestay-roller-furling-5-32-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-0235-00_f89c4a2e-e0b2-4f12-8364-09d003aca269.jpg?v=1676950464 TIGER UPPER FORESTAY ROLLER FURLING 5/32" BARE WIRE Tiger Upper Forestay Roller Furling 5/32" Bare Wire Murrays Part# 002-6035-02 Upper forestay for Hobie® Tiger with roller furling setup does not include swivel. https://murrays.com/products/tiller-rudder-stiffening-kit-prindle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/001-5141.jpg?v=1723214107 PRINDLE TILLER AND RUDDER STIFFENING KIT Tiller Rudder Stiffening Kit: Prindle Murrays Part# 001-5141 Spring-loaded tiller connection with contoured spacers tightens the hinge connection on Prindles. Six plastic shims reduce slop between rudders and castings https://murrays.com/products/tiller-connector-new-style 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1953.jpg?v=1676950468 HOBIE TILLER CONNECTOR KIT Hobie 1953 tiller connection kit - new style https://murrays.com/products/tiller-connection-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2061.jpg?v=1745534833 TILLER CONNECTION KIT (PR) Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX https://murrays.com/products/toggle-pin-with-lanyard 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/IMG_2023.jpg?v=1719942531 RONSTAN TOGGLE PIN WITH LANYARD 1/4 X 3/4" Ronstan Toggle Pin with Lanyard 1/4 X 3/4" Murrays Part# 21-1153L Stainless steel 1/4" diameter toggle pin replaces 3/4" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it. https://murrays.com/products/t-nut-channel-insert-8mm-brass 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/03-0197.jpg?v=1676950471 T-NUT CHANNEL INSERT 8mm BRASS https://murrays.com/products/toggle-strap-12-24 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/13-1020.jpg?v=1676950472 TOGGLE STRAP 12" - 24" Toggle Strap 12"-24" Murrays Part# 13-1020 Our handy toggle strap secures items with circumferences from 12" to 24". It is constructed of 1/8" shock cord that is secured with a 1-1/8" end stop. Sold individually Compare to Hobie Cat® Part# 370 https://murrays.com/products/tracker-car-complete-post-1993 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-0111.jpg?v=1676950472 HOBIE TRACKER CAR COMPLETE NEW (POST93) https://murrays.com/products/traced-you-cut-sail-number-black-14 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10-2810BK.jpg?v=1676950475 SAIL NUMBER 14" U-CUT BLACK https://murrays.com/products/tracker-car-complete-pre-1994 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1050.jpg?v=1676950476 TRACKER CAR COMPLETE (PRE'94) Tracker Car Complete (Pre-1994) Murrays Part# 007-1050 This tracker car is the standard replacement part for all 1993 and earlier Hobie® 14, 16 and 17 main tracker traveler assemblies. Includes 2-3 rivets where required. Hobie Cat® factory item #105. https://murrays.com/products/tracker-bottom-roller-post-1993 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-0112.jpg?v=1676950476 TRACKER BOTTOM ROLLER (POST 93) Tracker: Bottom Roller (Post-1993) Murrays Part# 007-0112 Bottom roller with rivets for the tracker car on 1993 and later Hobie® 14, 16 and 17 's. This part allows you to rebuild your existing Hobie Traveler car by just replacing the track rollers and keeping the top half. This part can be installed on older boats if the matching Deep Track is installed as well. Fits Hobie Getaway Traveler Car. Hobie Cat Part# 112 https://murrays.com/products/tracker-bottom-roller-pre-1994 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1060.jpg?v=1676950479 TRACKER: BOTTOM ROLLER (PRE 94) Tracker: Bottom Roller (Pre-1994) Murrays Part# 007-1060 The standard replacement bottom roller for all 1993 and earlier Hobie® 14 and 16s. Includes two rivets. Hobie Cat® factory item #106. https://murrays.com/products/tracker-hinge-pin 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1055.jpg?v=1676950480 TRACKER HINGE PIN https://murrays.com/products/tracker-deck-plate 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie_Tracker_Deck_Plate_-_11870000.jpg?v=1776282362 TRACKER DECK PLATE (EA) Hobie Tracker Deck Plate Murrays Part# 007-1051 The standard replacement deck plate for the traveler on all Hobie® 14, 16 and newer 17's Uses a 3/16 x 1/2" clevis pin to attach to the main sheet system. Also used in Hobie 14 and Hobie 16 upgrade downhaul systems to secure lower block. Sold individually Hobie part# 11870000 https://murrays.com/products/tracker-hinge-upright 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1054.jpg?v=1676950481 TRACKER UPRIGHT HINGE Tracker Hinge Upright Murrays Part# 007-1054 The standard replacement hinge upright for the tracker on all Hobie® 14, 16 and newer 17's. Fits: Hobie Getaway Main Traveler Car Hobie Cat® Part# 11840100 https://murrays.com/products/tracker-sheave 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1053.jpg?v=1676950483 TRACKER TRAVELER SHEAVE Tracker: Sheave The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's. Hobie® factory item #11880000. Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave. Fits Hobie Getaway Main Traveler Car. https://murrays.com/products/tracker-sheave-replacement-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1059.jpg?v=1676950484 TRACKER TRAVELER SHEAVE REPLACEMENT KIT Tracker Traveler Sheave Replacement Kit Murrays Part# 007-1059 The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's.  Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave. Fits Hobie Getaway Main Traveler Car. Hobie® Part# 11880000 https://murrays.com/products/tracker-sheave-spacer 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1052.jpg?v=1676950484 TRACKER SHEAVE SPACER (EA) Tracker Sheave Spacer Murrays Part# 007-1052 The standard replacement sheave spacer for the traveler on all Hobie® 14, 16 and newer 17's. Sold Individually Hobie Cat® Part# 11860000. https://murrays.com/products/tramp-clamp-10 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/12-0010.jpg?v=1676950485 TRAMP CLAMP (10) TRAMP CLAMP (10) Minimize chafing at trampoline stress points and reduce the possibility of the trampoline pulling out of the aluminum extrusion. Clamps slide into the aluminum extrusion track. 10 pieces, 1.5" long. By Tren Tec.™ Hobie Cat® uses #2066 for this item https://murrays.com/products/trailer-jack-with-caster 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/16-9510.jpg?v=1676950487 TRAILER JACK W/CASTER Trailer Jack with Caster Murrays Part# 16-9510 The Fulton 1000-lb. swivel jack is ideal for light boats up to 18 feet. https://murrays.com/products/tramp-lace-kit-h14-h16-h18-low-stretch-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2242.jpg?v=1676950488 H-14/16/18 LOW STRETCH TRAMPOLINE LACING LINE KIT Hobie Trampoline Lacing Line Kit: Hobie 14, Hobie 16, Hobie 18: low stretch line offers a longer-lasting option over shock cord and is the better choice for sailors who prefer a very tight tramp. As the line stretches slightly over time, sailors can re-tension the tramp lacing to their liking. The kit contains three lengths of 3/16" 8-strand black low-stretch line (one piece 33', two pieces 15') and lacing instructions. This kit will lace all factory and most aftermarket trampolines. https://murrays.com/products/tramp-lacing-kit-h14-16-18-shock-cord 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2241.jpg?v=1676950488 H-14/16/18 SHOCK CORD TRAMP LACING KIT Shock Cord Tramp Lacing Kit H14/16/18 Murrays Part# 001-2241 Shock Cord Tramp Lacing Kit H14, 16, 18 is for the recreational sailor who is lacing a trampoline. Shock Cord is usually the better choice over line tramp lacing. Just "set it and forget it" because shock cord maintains the tension you set when lacing your tramp. Shock cord also reduces tramp and grommet wear because the load is spread over multiple grommets, especially when walking on the tramp. The latest technology shock cord used in our kits https://murrays.com/products/tramp-lace-kit-h14-h16-h18-dyneema-race-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-2242-1.jpg?v=1676950489 H-14/16/18 DYNEEMA RACE TRAMP LACE KIT H14/16/18 Dyneema Race Tramp Lace Kit Murray Part# 001-2242-1 Tramp Lace Kit H14 H16 H18 - Dyneema Race Kit uses Dyneema® which is the best choice for racers or other sailors looking for the ultimate in strength, light weight, and very low stretch characteristics in their tramp line lacing. Dyneema® has excellent ultraviolet and abrasion-resistance properties for longevity. https://murrays.com/products/trampoline-getaway-wings-black-mesh 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3092-Hobie-Getaway-Wing-Trampolines-BlackMesh.jpg?v=1758749086 GETAWAY WING TRAMPOLINE - BLACK Getaway Wing Trampoline - Black Murrays part# 30-3092 This part is not frequently stocked. Please allow 2-3 weeks to build and ship if not in stock. Black mesh wing trampolines for the Getaway. Also called wing covers. Not made by Hobie, not legal for Hobie class racing. Built in California by sailors for sailors. We use the same mesh that Hobie uses. Requires 2 x 18' lengths of 3/16" line for lacing. We recommend 3/16" VLS Compare to Hobie part# 37971058 https://murrays.com/products/trampoline-h14-or-h14-turbo-mesh-1-piece-bias-cut 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3103.jpg?v=1718808590 H-14 1-PIECE BIAS CUT TURBO TRAMPOLINE-BLACK H18 1-Piece Bias Cut Trampoline-Black Murrays Part# 30-3103-2 This one-piece, bias-cut, black mesh tramp for Hobie® 18 provides a smooth, uncomplicated deck and includes an 11"x12" pocket and adjustable hiking straps. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Two-year warranty on workmanship and materials. https://murrays.com/products/trampoline-getaway-forward-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-3091.jpg?v=1680644897 GETAWAY FORWARD TRAMPOLINE 2000-02 Hobie Getaway Forward Trampoline - 2000-2002 - 3/8 BOLT ROPE Compare to Hobie part number ​37980055 https://murrays.com/products/trampoline-h14-or-h14-turbo-mesh-3-piece 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3101_meh.jpg?v=1718808654 H-14 3-PIECE MESH TRAMPOLINE-BLACK H14 3-Piece Mesh Trampoline-Black Murrays Part# 30-3101 This aftermarket 3-piece tramp for Hobie® 14 is not made by Hobie Cat, so it is not legal for Hobie® class racing. Black polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Grommets for Turbo jib block wires are included. Hobie Part# 10970055 https://murrays.com/products/trampoline-h17-mesh-3-piece-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3104_Hobie_17_trampoline_black_mesh.jpg?v=1721243881 H-17 3PC MESH TRAMPOLINE-BLACK H17 3-Piece Mesh Trampoline-Black Murrays Part# 30-3104 This aftermarket tramp for the 17 is now class-legal for Hobie racing! Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. It features a halyard pocket in the front and hiking straps on both sides. Compare to Hobie part# 50670091 https://murrays.com/products/trampoline-h17-mesh-1-piece-with-straps-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3103.jpg?v=1718808590 H-17 1PC BIAS CUT TRAMPOLINE-BLACK H18 1-Piece Bias Cut Trampoline-Black Murrays Part# 30-3103-2 This one-piece, bias-cut, black mesh tramp for Hobie® 18 provides a smooth, uncomplicated deck and includes an 11"x12" pocket and adjustable hiking straps. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Two-year warranty on workmanship and materials. https://murrays.com/products/trampoline-h17-wing-mesh-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3104-3-300x300.jpg?v=1734039140 H-17 WING TRAMPOLINE-SLIDE ON The Murrays Hobie 17 Wing Trampoline is a pair of aftermarket trampolines for Hobie 17 wings, they are not class-legal for Hobie class racing. Made with polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Includes both right and left wing trampolines. Sold as a pair (left and right) https://murrays.com/products/trampoline-h18-mesh-1-piece-bias-cut-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3103.jpg?v=1718808590 H-18 1PC BIAS CUT TRAMPOLINE-BLACK H18 1-Piece Bias Cut Trampoline-Black Murrays Part# 30-3103-2 This one-piece, bias-cut, black mesh tramp for Hobie® 18 provides a smooth, uncomplicated deck and includes an 11"x12" pocket and adjustable hiking straps. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Two-year warranty on workmanship and materials. https://murrays.com/products/trampoline-h18-mesh-3-piece-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3103_2.jpg?v=1721755218 H-18 3PC MESH TRAMPOLINE-BLACK H18 Black 3 Piece Trampoline Murrays Part# 30-3103 Murrays black mesh tramp for Hobie® 18 is not Class-legal for racing. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. The Hobie 18 version comes with a sewn in pocket in the front for your halyard and jib furling line. https://murrays.com/products/trampoline-h18sx-h21sc-wings-black-pair 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3105-1_2H18SX_21sc_WING_TRAMPOLINES_Murrays_Hobie_18SX_and_21SC_Wing_Trampolines._nbsp_Lace_on._nbsp_Sold_as_a_pair._nbsp_nbsp_Compare_to_Hobie_part_number_68040255_Not_compatible_with_the_Hobie_18_Magnum..jpg?v=1732215121 H18SX/21SC WING TRAMPOLINES-BLACK H18SX/21sc WING TRAMPOLINES Murrays Hobie 18SX and 21SC Wing Trampolines. Lace on. Sold as a pair. Compare to Hobie part number 68040255 Not compatible with the Hobie 18 Magnum. https://murrays.com/products/trampoline-h18-wing-magnum-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3105-1.jpg?v=1732215375 H-18 MAGNUM WING TRAMPOLINE-BLACK Hobie 18 Magnum wing trampoline set. Requires 2 x 16' pieces of 3/16 VLS line to install https://murrays.com/products/trampoline-h20-mesh-1-piece-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-3106.jpg?v=1676951808 H-20 1 PIECE TRAMPOLINE-BLACK - TEF Trampoline H20 Mesh 1-Piece-Black Murrays Part# 30-3106Y This aftermarket, one-piece, bias-cut, black mesh tramp for Hobie® 20 is not Hobie® Class-legal for racing. The tramp includes hiking straps, trapeze grommets, 16" by 24" Velcro pocket and webbing loops. https://murrays.com/products/trampoline-h21se-mesh-1-piece-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/30-3105.jpg?v=1676951812 H-21SE 2PC MESH TRAMPOLINE WITH TEFLON THREAD-BLACK Trampoline H21SE Mesh 1-Piece Black Murrays Part# 30-3105TEF Aftermarket one-piece, bias-cut black mesh tramp for Hobie® 21 Special Edition is not Hobie Class-legal for racing. Includes trapeze grommets, one Velcro halyard pocket and standard thread; Teflon (PTFE) thread extends the life of the tramp and is available for an additional charge. https://murrays.com/products/trampoline-n5-2-hull-520-72-wide-mesh-1-piece-bias-cut-black 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/trampoline-n5-5sl-mesh-1-piece-bias-cut-black 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/trampoline-n5-2-hull-pre-520-74-wide-mesh-1-piece-black 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/trampoline-n5-7-mesh-1-piece-bias-cut-black 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/trampoline-n6-0-mesh-1-piece-black 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/trampoline-n5-8-mesh-1-piece-bias-cut-black 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/trampoline-p16-mesh-1-piece-black-with-ports 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3122.jpg?v=1719940984 PRINDLE 16 MESH TRAMPOLINE-BLACK P16 Mesh Trampoline-Black Murrays Part# 30-3122 Black mesh tramp for Prindle 16 includes cut-outs for ports. Hiking straps are installed and one pocket is included. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Order lacing line separately. https://murrays.com/products/trampoline-p15-mesh-1-piece-black 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/trampoline-p18-mesh-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/30-3123.jpg?v=1745864508 PRINDLE 18 MESH TRAMPOLINE-BLACK Prindle 18 trampoline https://murrays.com/products/trapeze-handle-nylon 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-0412.jpg?v=1676950508 MURRAYS TRAPEZE HANDLE The Murrays Trapeze handle features a contoured grip and a wire guide prevent hand contact with the wire. A recessed cavity in the base holds the nicropress oval and shields the sailor from sharp wire ends. Sold Individually. Hobie uses item #2011 for this handle. Used on Nacra, Prindle and Hobie catamarans. https://murrays.com/products/trampoline-p18-2-p19-mesh-black 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/trapeze-shock-cord-for-hobie-16-and-hobie-14 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0128.jpg?v=1676950510 H-14/16 TRAP SHOCK CORD Hobie trapeze shock cord 20730001 and 20730002 https://murrays.com/products/trapeze-shock-cord-kit-h20 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0131.jpg?v=1676950511 H-20 TRAP SHOCK CORD KIT Trap Shock Cord Kit: H20 Murrays Part# 001-0131 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. Our shock cord kit comes with one plastic carbine hook installed; the other hook is installed after lacing shock cord through trampoline grommets. Kit includes two lengths of 1/4" shock https://murrays.com/products/trapeze-spreader-8-with-v-hook 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0149.jpg?v=1676950513 8" TRAPEZE SPREADER WITH V-HOOK Trapeze Spreader 8" with V-Hook Murrays Part# 001-0149 Medium-width stainless 8" windsurfing spreader with V-shaped hook for strength and safety. Weighs 7.5 oz. Limited to stock on hand. https://murrays.com/products/trapeze-shock-cord-nacra-prindle-sol-cat-getaway 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3520.jpg?v=1676950514 NACRA/PRINDLE/SOL CAT AND GETAWAY TRAP SHOCK CORD Trap Shock Cord: Nacra, Prindle, Sol Cat and Getaway Murrays Part# 001-8019 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. A plastic carbine hook is installed on one end only; the other hook is included to be installed after the shock cord is put on the boat. Cord is 1/4" d https://murrays.com/products/trapeze-wires-single 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-8253.jpg?v=1676950515 TRAP WIRE SINGLE CUSTOM Trap Wire Single Custom Murrays Part# 002-8253 https://murrays.com/products/trigger-snap-bronze-2-5 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/27-136800.jpg?v=1676950516 TRIGGER SNAP-BRONZE 2.5" Trigger Snap Bronze 2.5" Murrays Part# 27-136800 Lightweight, die-cast, manganese bronze swiveling shackle with overall length of 2-9/16". Weighs 1.5 oz. SWL unspecified. https://murrays.com/products/turnbuckle-complete-5-32 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1058.jpg?v=1676950517 TURNBUCKLE COMPLETE 5/32" https://murrays.com/products/turnbuckle-body-tubular 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1048-2_2.jpg?v=1676950518 TURNBUCKLE BODY TUBULAR https://murrays.com/products/turnbuckle-complete-1-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1048.jpg?v=1676950520 TURNBUCKLE COMPLETE 1/8" https://murrays.com/products/twist-toggle-hobie-prindle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie-20-jib-halyard-toggle-41880001-1.jpg?v=1676950521 HOBIE/PRINDLE TWIST TOGGLE Twist Toggle: Hobie/Prindle Murrays Part# 25-3320 Stainless steel twist toggle is the standard equipment connection between the shroud anchor pin and shroud adjuster on many catamarans. The twist toggle acts as a universal joint to help eliminate binding. Hobie Cat® item #20210000. https://murrays.com/products/washer-8-white-nylon 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-4006WH.jpg?v=1676950523 WASHER #8 WHITE NYLON WASHER #8 (WH NYLON) Murrays PN 19-4006WH White nylon washer is used for installation of access ports (hatches). https://murrays.com/products/upright-solo-righting-system-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/07-1263.jpg?v=1676950524 H-14/16 UPRIGHT SOLO RIGHTING SYSTEM Upright Solo Righting System H14/16 Murrays Part# 007-1263 This system extends the shroud to make righting your cat by yourself easier. Special care is needed to ensure that the mast is secured, as it can come out of its socket when the product is used. Hobie Part# 1263 https://murrays.com/products/washer-5-16-flat-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-4018.jpg?v=1676950525 WASHER 5/16x3/4" SS Washer 5/16x3/4" Stainless Steel Murrays Part# 19-4018 Flat stainless steel washer with 5/16" diameter hole. https://murrays.com/products/washer-flat-stainless-steel-10-sae 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-4014.jpg?v=1676950526 FLAT WASHER SS #10 (.188"x.5") Flat Washer #10 (.188"x.5") Stainless Steel Murrays Part# 19-4014 https://murrays.com/products/washer-and-cotter-pin-kit-for-cat-trax 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/cat-trax-bearing-kit_95f138a8-3914-46f8-80bf-77e73368ba84.jpg?v=1676950527 CAT TRAX WASHER & COTTER PIN KIT Cat Trax Washer & Cotter Pin Kit Murrays Part# 13-1401-7 Kit includes: Replacement washers and cotter pins for two Cat Trax beach wheels. https://murrays.com/products/wave-bridle-1-8-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Bridle_BK_219d64ba-98b7-4217-bbdc-a8eb7185e824.jpg?v=1676950529 WAVE BRIDLE 1/8" BLACK WIRE Wave Bridle 1/8" Black Murrays Part# 002-0814-02 One black bridle for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® 39822011. https://murrays.com/products/hobie-wave-main-halyard-comptip 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Hobie_Wave_Halyard_38651001.jpg?v=1762188780 WAVE MAIN HALYARD The Murrays main halyard for Hobie Wave is constructed with 1/4" polyester yacht braid line and 316 stainless wire finished with a halyard shackle with a captured pin, Built to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie part number 38651001. https://murrays.com/products/wave-forestay-1-8-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Forestay_BK_3903f08c-6625-462b-bf9b-5254fa7fe0f3.jpg?v=1676950530 WAVE FORESTAY 1/8" BLACK WIRE Wave Forestay 1/8" Black Murrays Part# 002-0844-02 One black forestay for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® #39810001. https://murrays.com/products/windsurf-adjustable-outhaul-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-9520.jpg?v=1676950532 WINDSURF ADJUSTABLE OUTHAUL KIT Windsurf Adjustable Outhaul Kit Murrays Part# 001-9520 Racers and recreational windsurf sailors can adjust outhaul tension "on the fly" for maximum power or speed: Low gear: Loosen outhaul tension to "power-up" to get going, even in light wind. Shift to drive: Tighten outhaul to flatten sail for more speed as you get onto a plane and/or more efficiency when heading upwind. Adjust the outhaul (sail shape) from either side, at any time. https://murrays.com/products/wave-shroud-1-8-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Shroud_BK_eb95a5f3-7d3f-4637-b8a1-b97df0abe9ee.jpg?v=1676950533 WAVE SHROUD 1/8" BLACK WIRE Wave Shroud 1/8" Black Wire Murrays Part# 002-0804-02 Single black shroud (sidestay) for Hobie® Wave is constructed to factory specifications. Compare to Hobie Part# 39790001 https://murrays.com/products/wire-1-8-7x19-bare 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Dwyer-Wire-7x19-Generic-500x__49290_562713b6-6daa-4566-a48f-ac6b422bb1fd.jpg?v=1733337837 WIRE 1/8" 7X19 BARE 304 SS Wire 1/8" 7X19 Bare 304 Stainless Steel 304 stainless steel cable is the industry standard for marine rigging applications due to its high strength and corrosion resistance. 7x19 cable is flexible and ideal for Hobie, Nacra and Prindle halyards. Features 304 Stainless Steel Flexible and Low Stretch Highly Polished for Marine Use 7 groups of 19 strands Sold by the foot https://murrays.com/products/wire-1-16-7x7-bare 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/7X7_BARE_WIRE_d5e1d16d-7ed5-4080-94b6-64ee340a1436.jpg?v=1733417490 WIRE 1/16" 7X7 BARE 304 SS Wire 1/16" 7X7 Bare 304 Stainless Steel Murrays Part# 002-0022 304 stainless steel cable is the industry standard for marine rigging applications due to its high strength and corrosion resistance. 7x7 cable is flexible and ideal for Hobie, Nacra and Prindle halyards. https://murrays.com/products/wire-1-8-1x19 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/1x19_316_stainless_steel_wire_rope.jpg?v=1733791169 WIRE 1/8" 1X19 BARE 316 SS 316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. Ideal for manufacturing long lasting bridals, shrouds and stays. Features 316 Stainless Steel Stiff and Low Stretch Highly Polished for Marine Use One Strand Consisting of 19 Wires Sold by the foot https://murrays.com/products/wire-3-32-1x19 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Dwyer-Wire-1x19-Generic-500x__41096.jpg?v=1733335245 WIRE 3/32" 1X19 BARE SS 316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. Ideal for manufacturing long lasting bridals, shrouds and stays. Features 316 Stainless Steel Stiff and Low Stretch Highly Polished for Marine Use One Strand Consisting of 19 Wires Sold by the foot https://murrays.com/products/wire-3-32-7x19-bare 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Dwyer-Wire-7x19-Generic-500x__49290.jpg?v=1733337082 WIRE 3/32" 7X19 BARE 316 STAINLESS Wire 3/32" 7X19 Bare 316 Stainless Steel  316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 7x19 cable is flexible and ideal for Hobie, Nacra and Prindle halyards. Features 316 Stainless Steel Flexible and Low Stretch Highly Polished for Marine Use 7 groups of 19 strands Sold by the foot https://murrays.com/products/wire-3-32-7x7-bare 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/7X7_BARE_WIRE.jpg?v=1733356749 WIRE 3/32" 7X7 BARE 304 SS https://murrays.com/products/wire-5-32-7x19-bare 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/7x19_long_wire_bare.jpg?v=1733339614 WIRE 5/32" 7X19 BARE 304 SS Wire 5/32" 7X19 Bras 304 Stainless Steel 304 stainless steel cable is the industry standard for marine rigging applications due to its high strength and corrosion resistance. 7x19 cable is flexible and ideal for Hobie, Nacra and Prindle halyards. Features 304 Stainless Steel Flexible and Low Stretch Highly Polished for Marine Use 7 groups of 19 strands Sold by the foot https://murrays.com/products/wire-5-32-1x19 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Dwyer-Wire-1x19-Generic-500x__13728.jpg?v=1733335218 WIRE 5/32" 1X19 BARE 316 SS Wire 5/32" 1X19 Bare 316 Stainless Steel 316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. Ideal for manufacturing long lasting bridals, shrouds and stays. Features 316 Stainless Steel Stiff and Low Stretch Highly Polished for Marine Use One Strand Consisting of 19 Wires Sold by the foot https://murrays.com/products/wire-block-single-with-shackle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/22-3302.jpg?v=1676950542 SINGLE WIRE BLOCK WITH SHACKLE Single Wire Block With Shackle Murrays Part# 22-3302 This single wire block can be used to replace the jib halyard block on Nacra 5.2, Performance part 9896. https://murrays.com/products/wire-stud-5-32-x-5-16-24-right-hand 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1056.jpg?v=1676950546 WIRE STUD 5/32 X 5/16-24 RH https://murrays.com/products/wire-stud-left-5-32-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/02-1057.jpg?v=1676950546 WIRE STUD LEFT 5/32" (SS) https://murrays.com/products/trapeze-shock-cord-h17 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-3520_78d9a3c7-5fe0-495a-bc22-f7e0c6b59e03.jpg?v=1676950546 H-17 TRAP SHOCK CORD Trap Shock Cord H17 Murrays Part# 001-3520 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. Shock cord comes with one plastic carbine hook installed; the other hook is installed after lacing shock cord through trampoline grommets. Cord is 1/4" diameter by 12' Sold Each https://murrays.com/products/washer-1-4-flat-stainless-steel-thin 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/19-4016.jpg?v=1676950549 WASHER 1/4" FLAT (SS) Washer 1/4 Flat Stainless Steel Murrays Part# 19-4016 Thin, flat stainless steel washer measures 1/2" OD (outside diameter) x 1/4" ID (inside diameter) https://murrays.com/products/yoke-stamping-only-stainless-steel 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/01-0063.jpg?v=1676950550 YOKE STAMPING ONLY (SS) Yoke Stamping Only Stainless Steel Murrays Part# 001-0063 Replacement yoke stamping for #01-0062 hiking stick yoke assembly. Compare to Hobie Cat® #3205. https://murrays.com/products/4-spur-grommets-set-of-24 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/33-2015.jpg?v=1676950596 GROMMET #4 SPUR Set of 24 #4 Spur Grommets Set of 24 https://murrays.com/products/2-swage-it-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/2Swageitkit-handheldwirecrimp.jpg?v=1712183672 #2 SWAGE-IT KIT #2 Swege-It Kit Murrays PN 33-0012 The #2 Swage-It Kit includes swage-it tool for 1/16", 3/32" and 1/8" oval sleeves. Made in the USA. https://murrays.com/products/4-handy-spur-grommet-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/33-1217.jpg?v=1679505495 GROMMET KIT #4 HEAVY DUTY KIT #4 Handy Spur Grommet Kit - Hobie 2061 trampoline grommet kit https://murrays.com/products/1-2-hollow-braid-line 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39-0861-1.jpg?v=1715122790 1/2" HOLLOW BRAID LINE 1/2″ Hollow Braid Line Hobie righting line Hobie part number RL012BLU https://murrays.com/products/4-spur-grommets-set-of-144 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/33-2016.jpg?v=1676950600 GROMMET #4 SPUR Set of 144 #4 Spur Grommets Set of 144 https://murrays.com/products/11-snuffer-bag-i17-i18 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/1003-doubler-plate-new-style 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1013.jpg?v=1676950602 NACRA NEW STYLE 1003 DOUBLER PLATE New-Style 1003 Doubler Plate Murrays Part# 56-1013 New-style doubler plate for Inter #56-1003 Performance Sports factory item #1013 https://murrays.com/products/303-high-tech-fabric-guard 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-6534-1.jpg?v=1676950612 303 FABRIC GUARD 16oz 303 FABRIC GUARD 16oz https://murrays.com/products/303-aerospace-protectant-uv-protection-for-vinyl-rubber-fiberglass-and-plastic 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-030-1.jpg?v=1676950614 303 PROTECTANT PUMP 10OZ 303 AEROSPACE UV PROTECTANT PUMP 10 OZ https://murrays.com/products/3m-5200-marine-adhesive-sealant-3-oz 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-5203.jpg?v=1679593444 3M 5200 ADHESIVE SEALANT 3OZ 3M 5200 Adhesive Sealant 3oz Murrays Part# 40-5203 3M 5200 Marine Adhesive Sealant is the preferred choice for sealing masts. It goes on smoothly, won't sag, and remains workable for up to 4 hours. The seal is extremely strong and retains its strength above and below the waterline. The sealant provides incredible adhesion, yet stays flexible after it's cured. It becomes tack-free in 48 hours; completely cures in 5 to 7 days with no shrinkage. Clean up with kerosene or mineral spirits. 3 oz. tube. White. https://murrays.com/products/84-hobie-fiberglass-tiller-extension 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20550001-1.jpg?v=1676950628 HOBIE 14/16 FIBERGLASS TILLER Fiberglass Tiller H14/16 Murrays Part# 50-20550001 84" Hobie Fiberglass Tiller Extension The 84" Hobie Fiberglass Tiller Extension is the Hobie factory 84" fiberglass tiller extension with hinge for the Hobie 14 or 16. This stick can be cut to 60" for Getaway or Wave. https://murrays.com/products/airush-knotless-ball-package-of-6 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/54-8094.jpg?v=1676950632 AIRUSH KNOTLESS BALL (6) https://murrays.com/products/aquapac-belt-case-submersible 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/49-2828-1.jpg?v=1676950636 AQUAPAC BELT CASE 828 Aquapac Belt Case 828 Murrays Part# 49-2828 With Aquapac's ultimate compact camera case, it's no problem to go canyoning with your camera. Capture waterfalls from underneath and dive into pools without worry. https://murrays.com/products/anchor-plate-h18sx-magnum-wings 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-68190001.jpg?v=1749768629 ANCHOR PLATE H18SX MAGNUM WINGS https://murrays.com/products/aquapac-large-vhf-classic-case-submersible 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/49-2248-black-front-waterproof-radio-case-aquapac-510x510-1.jpg?v=1731427830 AQUAPAC LARGE VHF CLASSIC 248 AQUAPAC LARGE VHF CLASSIC 248 Murrays Part# 49-2248 https://murrays.com/products/aquapac-small-armband-case-submersible 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/49-2216.jpg?v=1676950639 AQUAPAC SMALL ARM CASE 216 The Aquapac Small Armband case with super-strong armbands fits phones, walkie-talkies and GPS units. Carry your electronics on your arm, leaving you free to kite-surf, raft or engage in any other activity in which you want to immerse yourself. This case works best with small phones and micro-radios. This case fits all the same devices as the Mini Whanganui (49-2108), with a maximum device size is 5" tall with a circumference of 6". https://murrays.com/products/aquapac-large-phone-case-iphone-plus 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/49-2358.png?v=1676950640 AQUAPAC LARGE PHONE CASE Aquapac Large Phone Case Murrays Part# 49-2358 https://murrays.com/products/aquapac-small-vhf-classic-case-submersible 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/49-2228-black-front-waterproof-radio-case-aquapac-510x510-1.jpg?v=1731428475 AQUAPAC SMALL VHF CASE 228 Aquapac Small VHF Case 228 Murrays Part# 49-2228 https://murrays.com/products/aquapac-small-vhf-pro-case-submersible 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/49-2228-black-front-waterproof-radio-case-aquapac-510x510-1_b64d9e13-9656-41f1-a78c-901736a4342d.jpg?v=1731428538 AQUAPAC SMALL VHF PRO 229 Aquapac Small VHF Pro 229 Murrays Part# 49-2229 https://murrays.com/products/aquaseal-75-oz-package-with-cotol-5-oz 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/38-1912_cf8b1681-d285-451f-9658-417d105bf5bc.png?v=1676950646 AQUASEAL .75oz PACKAGE WITH COTOL .5OZ https://murrays.com/products/arriba-cork-ball-grip-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Corkball.jpg?v=1676950649 ARRIBA CORK BALL GRIP KIT ARRIBA CORK BALL GRIP KIT Murrays Part# 44-0002 The Cork Ball Grip Kit replaces the stock Arriba, Murrays Aluminum Tiller and Hot Stick end grips. The ball is predrilled, lightweight and makes the hiking stick easier to hold. The inside diameter is 1-1/8". Epoxy adhesive is included. Hobie Cat® item #FXGRIP. Order epoxy (#00-0002-1) to "caramel-coat" the cork ball handle to make it last longer https://murrays.com/products/assembly-manual-getaway 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-37450011.jpg?v=1685145530 GETAWAY ASSEMBLY MANUAL Getaway Assembly Manual Murrays Part# 50-37450011 Hobie factory assembly manual for the Getaway. https://murrays.com/products/assembly-manual-h14 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-13450000.png?v=1685145605 H-14 ASSEMBLY MANUAL H14 Assembly Manual Murrays Part# 50-13450000 Printout of the H14 assembly manual PDF. https://murrays.com/products/assembly-manual-h17-sport 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-52450011.jpg?v=1676950648 H-17 SPORT ASSEMBLY MANUAL H17 Sport Assembly Manual Murrays Part# 50-52450011 Hobie® factory assembly manual for the Hobie 17 Sport. The manual is also available for free download at the Hobie Cat® Web site. https://murrays.com/products/assembly-manual-h17 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50450001.jpg?v=1676950649 H-17 ASSEMBLY MANUAL H17 Assembly Manual Murrays Part# 50-50450001 Printout of Hobie 17 assembly manual PDF. https://murrays.com/products/assembly-manual-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-23450000-1.jpg?v=1676950649 H-16 ASSEMBLY MANUAL H16 Assembly Manual Murrays Part# 50-23450000 Hobie Cat® factory manual for the Hobie 16®. The manual is also available for free download at the Hobie Cat® Web site. https://murrays.com/products/assembly-manual-h18-h18sx 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-63450000.jpg?v=1676950653 H-18 ASSEMBLY MANUAL H18 Assembly Manual Murrays Part# 50-63450000 Printout of H18 assembly manual PDF. https://murrays.com/products/assembly-manual-h20 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-43450001.jpg?v=1676950653 H-20 ASSEMBLY MANUAL H20 Assembly Manual Murrays Part# 50-43450001 Printout of the Miracle 20 PDF. Includes tuning guide in the back. https://murrays.com/products/assembly-manual-hobie-wave 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-38450000.jpg?v=1685145664 WAVE ASSEMBLY MANUAL Wave Assembly Manual Murrays Part# 50-38450000 Hobie® factory assembly manual for the Wave catamaran. The manual is also available for free download at the Hobie Cat® Web site. https://murrays.com/products/back-up-casting-h18-bow-tang 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61120001.jpg?v=1676950655 H-18 BACK UP CASTING BOW TANG Back Up Casting H18 Bow Tang Murrays Part# 50-61120001 Hobie® factory replacement back up casting for Hobie® 18 bow tang. https://murrays.com/products/backrest-end-cap-left-front-right-rear-getaway 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37660031.jpg?v=1676950657 GETAWAY WIND END CAP-FRONT LEFT, REAR RIGHT Backrest End Cap Left Front Right Rear Getaway Murrays Part# 50-37660031 Hobie® factory replacement end cap casting for Getaway backrest. Left front/right rear https://murrays.com/products/backrest-end-cap-right-front-left-rear-getaway 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37660041.jpg?v=1676950658 GETAWAY WING END CAP-FRONT RIGHT, REAR LEFT Getaway Wing End Cap-Front Right, Rear Left Murrays Part# 50-37660041 Replacement end cap for Hobie Getaway wing assembly. https://murrays.com/products/batten-cap-hobie-jib-leech-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-21333000-1.jpg?v=1676950669 HOBIE JIB BATTEN LEECH CAP (EA) Batten Cap Jib Leech H16 Murrays Part# 50-2133000 Hobie® factory jib leech batten cap for Hobie® 16. For batten tie, use 18" of 1/8" Dacron® solid braid #39-0221. These are also used on the top two battens of a Hobie Wave and the top batten of a Hobie 18 Mainsail. Sold individually https://murrays.com/products/batten-cap-hobie-main-luff 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-11322011.jpg?v=1676950671 MAIN LUFF BATTEN CAP (EA) Batten Cap Main Luff (EA) Murrays Part# 50-11322011 Main luff batten cap for Hobie Cats are sold individually. Order batten tie separately; 18" of line per batten cap is standard. Hobie® factory replacement part. https://murrays.com/products/batten-cap-hobie-main-leech 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/11323000_1_z204.jpg?v=1726184134 HOBIE MAIN LEECH BATTEN CAP Batten Cap Hobie Main Leech Murrays Part# 50-11323000 Hobie® factory replacement part number 11323000. Hobie batten cap are sold individually. Order batten tie separately; 18" of 1/8" line per batten cap is standard. Sold individually https://murrays.com/products/batten-cap-rbs-10-x-8mm 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/batten-cap-rbs-10-x-7mm 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/bbtalkin-multi-connector-set 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/52-2521.jpg?v=1732037154 BBTALKIN' MULTI CONNECTOR SET BBTalkin' Multi Connector Set Murrays Part# 52-2521 This connector is designed with our secure waterproof seal that screws into your BBTalkin' Unit. The end of this connector is a female 3.5mm jack. You can plug any male 3.5mm jack into this multi-connector. If you do not wish to use a BBTalkin' headset with your units, you can plug any earbud with microphone set up that has a 3.5mm male jack into this connector. https://murrays.com/products/bbtalkin-sports-headset-v2-0 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/52-2511-1.jpg?v=1676950679 BBTALKIN' SPORTS HEADSET WITH HEADBAND V2.0 BBTalkin' Sports Headset with Headband V2.0 Murrays Part# 52-2511-1 Waterproof headset designed for BBTalkin' Bluetooth Waterproof communication devices. The headband is a lightweight design with a single sided speaker and boom microphone. This comes with an arm band for mounting the unit. https://murrays.com/products/beam-strap-front-n6-0 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-3512-2.jpg?v=1676950682 NACRA 6.0 FRONT BEAM STRAP Front Beam Strap Murrays Part# 56-3512 Front beam strap for Nacra 6.0 Nacra Sailing factory item# 30096 https://murrays.com/products/beam-strap-all-n5-0-5-7 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-3510-1.jpg?v=1676950683 NACRA 5.0 and 5.7 FRONT BEAM STRAP Beam Strap All N5.0 and 5.7 Murrays Part# 56-3510 Beam strap for front crossbars on all Nacra 5.0 and 5.7 models and rear crossbars on Nacra 5.0, 5.7 and 6.0. Nacra Sailing factory item #30095. https://murrays.com/products/beam-strap-rear-n5-2-n5-5-n5-8 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-3509-2.jpg?v=1676950683 NACRA REAR BEAM STRAP Beam Strap Rear N5.2, N5.5, N5.8 Murrays Part# 56-3509 Rear beam strap for Nacra 5.2, 5.5 and 5.8 is Nacra Sailing factory item #30094. https://murrays.com/products/bearing-cage-roller-furler-drum 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61930000.jpg?v=1676950686 H-18 JIB FURLER BEARING (CAGE) H18 Jib Furler Bearing (Cage) Murrays Part# 50-61930000 Hobie® factory replacement bearing cage for Hobie® roller furler drum #50-61900000. Hobie Part# 61930000 https://murrays.com/products/bearing-race-hobie-roller-furler-drum 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61920000.jpg?v=1676950776 H-18 JIB FURLER BEARING (RACE) H18 Jib Furler Bearing (Race) Murrays Part# 50-61920000 Hobie® factory replacement bearing race for Hobie roller furler drum. Hobie Part# 61920000 https://murrays.com/products/block-hanger-h20 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40760001.jpg?v=1676950687 H-20 BOOM BLOCK HANGER Block Hanger H20 Murrays Part# 50-40760001 Hobie® factory replacement block hanger for Hobie® 20. Hobie part# 40760001 https://murrays.com/products/black-low-stretch-8-strand-line-5-32 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/39-2302bk.jpg?v=1676950689 5/32" LOW STRETCH 8-STRAND 4MM https://murrays.com/products/boeshield-t-9-4-oz 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/T-9_Boeshield_4oz_was_developed_by_The_Boeing_Company_for_lubrication_and_protection_of_aircraft_components._It_is_a_combination_of_solvents_lubricants_and_waxes_designed_for_penetration_moisture_displ.jpg?v=1775509317 T-9 BOESHIELD 4oz T-9 Boeshield 4oz was developed by The Boeing Company for lubrication and protection of aircraft components. It is a combination of solvents, lubricants, and waxes designed for penetration, moisture displacement, lubrication and protection. Boeshield T-9® dries to a thin waxy film that clings to metal for months. It will loosen rusty and corroded parts and is safe on paints. https://murrays.com/products/bolt-10-x-50 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/bolt-3-8-16-x-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8040501.jpg?v=1679609586 BOLT 3/8-16 X 2" Bolt 3/8-16 X 2" Murrays Part# 50-8040501 Replacement stainless steel 3/8-16 x 2" bolt is used on Hobie® 18 front and rear crossbars. Hobie Part# 8040501 https://murrays.com/products/bolt-3-8-16-x-5 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8040061.jpg?v=1676950696 BOLT 3/8-16 X 5" Bolt 3/8-16 X 5" 50-8040061 Hobie® factory 3/8-16 x 5" bolt is used on Hobie 20 Miracle front crossbar. Hobie Part# 8040061 https://murrays.com/products/bolt-5-16-18-x-2-hx-hd 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/8040331.jpg?v=1679512184 BOLT 5/16-18 X 2" Bolt 5/16-18 X 2" Murrays Part# 50-8040331 Replacement 5/16-18 x 2" bolt is used as a rudder bolt on Hobie® Pre-EZ Lock Rudder System. Hobie Part# 8040331 https://murrays.com/products/bolt-front-beam-3-8-x-4-5 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F180.jpg?v=1718811444 NACRA BOLT FRONT BEAM 3/8-16X4.5" Inter Bolt Front Beam 3/8-16X4.5" Murrays Part# 56-F180 Socket head 3/8 x 4-1/2" front beam bolt for all Inters Compatible Boats:  Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS. Performance part# F180 https://murrays.com/products/bolt-5-16-18-x-3-5 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8040371-1.jpg?v=1676950699 BOLT 5/16 X 18 X3.5" Bolt 5/16 X 18 X3.5" Murrays Part# 50-8040371 Hobie® factory replacement 5/16-18 x 3-7/16" bolt. Pylon bolt for Hobie® 14 and older 16 (1994 and prior; starting in 1995, boats had newer style castings/pylons). Hobie Part# 8040371 https://murrays.com/products/bolt-for-gudgeon-1-4-x-1-25 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F117.jpg?v=1718810698 NACRA/PRINDLE BOLT FOR GUDGEON 1/4-20X1.25" https://murrays.com/products/bolt-hex-3-8-x-4-25-prindle-crossbar 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F142.jpg?v=1718811496 PRINDLE HEX BOLT 3/8 X 4.25" Hex Bolt 3/8 X 4.25" Murrays Part# 56-F142 3/8" x 4-1/4" hex head bolt is for Prindle front crossbar Performance Sports factory item# F142 https://murrays.com/products/bolt-rear-beam-3-8-x-4-5 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-F181.jpg?v=1676950703 NACRA REAR CROSSBAR BOLT 3/8-16X4.5" Rear Crossbar Bolt 3/8-16X4.5 Hex Head Murrays Part# 56-F181 Rear crossbar bolt for Inters, Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS. Performance Sports factory item# F181 https://murrays.com/products/bolt-hex-5-16-18-x-1-for-07-1953 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8040171-1.jpg?v=1676950705 BOLT HEX 5/16-18 X 1" Bolt Hex 5/16-18 X 1" Murrays Part# 50-8040171 Hobie® factory hex head bolt measures 5/16-18 x 1". Used on #07-1953 Tiller Connector for Hobie® 20. Hobie Part# 8040171 https://murrays.com/products/bolt-rudder-hold-down-inter 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-F155.jpg?v=1676950706 NACRA BOLT RUDDER HOLD DOWN Bolt Rudder Hold Down Murrays Part# 19-3011 ​Rudder hold down bolt for Inters is Nacra Sailing factory Part# 30357 https://murrays.com/products/bolt-socket-head-3-8-16-x-2-50 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-8040521-1.jpg?v=1737660916 BOLT 3/8-16 X 2.50" Bolt Socket Head 3/8-16 X 2.50" Murrays part# 50-8040521 Hobie® factory replacement 3/8-16 x 2.50" socket head bolt is used on Getaway wing and Hobie® 18 rear inboard support. Hobie Part# 8040521 https://murrays.com/products/bolt-socket-head-3-8-16-x-3-75 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8040561.jpg?v=1679609875 BOLT SOC HEAD 3/8-16 X 3.75" Bolt Socket Head 3/8-16 X 3.75" Murrays Part# 50-8040561 Hobie® factory replacement 3/8-16 x 3.75" socket head bolt. Applications: Hobie 18 inboard front crossbar https://murrays.com/products/bonez-board-stackers-pair 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/41-3022.jpg?v=1679609352 BONEZ BOARD STACKERS (PAIR) https://murrays.com/products/book-catamaran-racing-for-the-90s 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/45-0052.jpg?v=1676950710 BOOK: CATAMARAN RACING FOR THE 90'S Book: Catamaran Racing for the 90's Murrays Part# 45-0052 It may be the 2000's, but this book is still relevant to today's cat sailor. Improve your sailing in any or all of the 21 major subjects covered in this manual. https://murrays.com/products/book-fiberglass-boat-repair-maintenance 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/45-1030-1.jpg?v=1676950711 BOOK: FIBERGLASS BOAT REPAIR AND MAINTENANCE Book: Fiberglass Boat Repair & Maintenance Murrays Part# 45-1030 https://murrays.com/products/book-freestyle-windsurfing 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/45-0181-1.jpg?v=1679611346 BOOK: FREESTYLE WINDSRFING Book: Freestyle Windsurfing Murrays Part# 45-0181 Includes explanations and hints, along with hundreds of photographs, demonstrating moves suitable for beginners as well as advanced freestylers. The 128-page paperback book by Roger Jones has a copyright date of 1983. Limited to stock on hand. https://murrays.com/products/book-sailing-drills-by-rick-white 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/45-0053-1.jpg?v=1676950715 BOOK: SAILING DRILLS BY RICK WHITE Book: Sailing Drills Murrays Part# 45-0053 Rick White and Mary Wells of Rick White's Sailing Seminars have compiled a book of drills that dissect sailing and racing. These intensified drills can eliminate years of improper practice time, years of trial and error, years of following others around the course, and years of disappointment! 160 pages. ©1995. Paperback. https://murrays.com/products/book-the-hobie-18-reg-performance-manual 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/45-0031.jpg?v=1679675172 H-18 PERFORMANCE MANUAL https://murrays.com/products/boom-assembly-h17-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50510000.jpg?v=1676950716 H-17 BOOM ASSEMBLY-BLACK Boom Assembly H17 Black Murrays Part# 50-50510000 Hobie® factory replacement black boom assembly for Hobie® 17.  Hobie part# 50510000 https://murrays.com/products/boom-assembly-h16-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/20720011_4_z166.jpg?v=1725651663 H-16 BOOM ASSEMBLY-BLACK Boom Assembly H16 Black Murrays Part# 50-20720011 Black boom assembly for Hobie® 16 includes end caps, block hanger, and barrel cleat. Order gooseneck assembly separately. This boom is normally a special order item. Hobie Part# 20720011 https://murrays.com/products/boom-block-hanger-hobie 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/10760000_2_z144.jpg?v=1725652049 HOBIE BOOM BLOCKER HANGER Hobie Boom Blocker Hanger  Murrays Part# 50-10760000 Hobie factory boom block hanger for the Hobie 14, 16, 17 and 18. Hole spacing is 1-1/8".  Use four 6-4 rivets (#19-5031) for installation. https://murrays.com/products/boom-assembly-h20 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40721001.jpg?v=1676950724 H-20 BOOM ASSEMBLY https://murrays.com/products/boom-end-cap-h14-h16-aft 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/10741031z103.jpg?v=1725651846 H14/16 AFT BOOM END CAP H14/16 Boom End Cap AFT Murrays Part# 50-10741031 Replacement rear boom end cap for Hobie® 14 or 16. Use two 6-6 rivets (#19-5032) for installation. Hobie® Part# 10741031 https://murrays.com/products/boom-end-cap-front-nacra-prindle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-7902.jpg?v=1676950726 NACRA/PRINDLE FRONT BOOM END CAP Front Boom End Cap Murrays Part# 56-7902 Front boom end cap for Nacra and Prindle cats. Nacra Sailing factory item# 30204 https://murrays.com/products/boom-end-cap-h14-h16-forward 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/10740011_4_z26.jpg?v=1725652263 H-14/16 FORWARD BOOM END CAP Boom End Cap H14/16 Forward Murrays Part# 50-10740011 Hobie® factory replacement end cap for the forward end of Hobie® 14 or 16 boom. Also for Hobie® 21SC. Use three #19-5032 6-6 rivets for installation. https://murrays.com/products/boom-end-cap-h17-forward 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50512001.jpg?v=1676950729 H-17 FORWARD BOOM END CAP Boom End Cap H17 Forward Murrays Part# 50-50512001 Hobie® factory replacement forward end cap for Hobie 17 boom. https://murrays.com/products/boom-end-cap-h17-aft 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50513011.jpg?v=1676950730 H-17 BOOM END CAP H17 Boom End Cap Murrays Part# 50-50513011 Hobie® factory replacement aft end cap for Hobie 17. https://murrays.com/products/boom-end-cap-h20-forward 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40741021.jpg?v=1676950732 H-20 FORWARD BOOM END CAP Boom End Cap H20 Forward Murrays Part# 50-40741021 Hobie® factory replacement end cap for forward end of Hobie 20 boom. Hobie part# 40741021 https://murrays.com/products/boom-end-cap-h18-forward 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60751010.jpg?v=1676950733 H-18 FORWARD BOOM END CAP Boom End Cap H18 Forward Murrays part# 50-60751010 Hobie® factory replacement forward end cap for Hobie 18 boom. https://murrays.com/products/boom-end-cap-rectangular-rear-prindle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-7903.jpg?v=1676950734 NACRA/PRINDLE REAR BOOM END CAP Rear Boom End Cap Murrays Part# 56-7903 Rectangular rear boom end cap casting for Nacra 5.2 and all Prindles. Nacra Sailing factory item# 30205 https://murrays.com/products/boom-end-cap-h18-aft 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60760011.jpg?v=1676950736 H-18 AFT BOOM END CAP Boom End Cap H18 Aft Murrays Part# 50-60760011 Hobie® factory replacement aft end cap for Hobie 18 boom. Hobie part# 60760011 https://murrays.com/products/boom-outhaul-car-assembly-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60220001.jpg?v=1676950737 H-18 BOOM OUTHAUL CAR ASSEMBLY H18 Boom Outhaul Car Assembly Murrays Part# 50-60220001 Hobie® factory replacement outhaul car assembly for Hobie® 18. Outhaul and shock cord are not included. For outhaul line, order 7' of 3/16" black line #39-2311BK. For outhaul shock cord, order 7' of #39-7491 black 1/4" shock cord. https://murrays.com/products/boom-outhaul-car-prindle-inter 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-7907.jpg?v=1676950740 PRINDLE/NACRA/INTER BOOM OUTHAUL CAR Boom Outhaul Car Murrays Part# 56-7907 Internal boom outhaul car for all Prindles, Nacra 5.2 and Inters. Nacra Sailing factory item# 30206 https://murrays.com/products/boom-outhaul-car-bearing-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60240000.jpg?v=1676950741 H-18 BOOM OUTHAUL BEARING Boom Outhaul Bearing H18 Murrays Part# 50-60240000 Boom bearing for Hobie 18 outhaul system https://murrays.com/products/boomlet-hc17-se-to-sport-conversion 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-52722011-300x35-1.jpg?v=1676950741 H-17SE TO SPORT BOOMLET CONVERSION Boomlet HC17 SE to Sport Conversion Murrays part# 50-52722011 Make it much easier to move from one side of a Hobie® 17 to the other while tacking or jibing by removing the boom. Easily convert 1995 and newer Hobie® 17 SE race boats by adding the Hobie factory Boomlet. Hobie part# 52722011 https://murrays.com/products/boom-retainer-clip-h20 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8060151.jpg?v=1676950745 H-20 BOOM RETAINER CLIP H20 Boom Retainer Clip Murrays Part# 50-8060151 Hobie® factory replacement boom retainer clip for Hobie 20. Hobie Part# 8060151 https://murrays.com/products/bow-eye-screw-inter-18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1805.jpg?v=1676950746 NACRA BOW EYE SCREW Bow Eye Screw 56-1805 Factory stainless steel bow eye screw for Inter 18 https://murrays.com/products/bow-spreader-pole-wave 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-38999021.jpg?v=1676950749 WAVE BOW SPREADER POLE Bow Spreader Pole Wave Murrays Part# 50-38999021 Hobie® factory replacement bow spreader pole only for Wave. Hobie Part# 38999021 https://murrays.com/products/bow-foil-end-tang 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9667.jpg?v=1676950750 NACRA BOW FOIL END TANG Bow Foil End Tang Murrays part# 56-9667 End tang for bridle foil attachment i Nacra Sailing factory item #30306 https://murrays.com/products/bow-tang-h14-h16-getaway 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/20120000-bow-tang.jpg?v=1676950751 H-14/16 BOW TANG H14/16 Bow Tang Murrays Part# 50-20120000 Hobie® factory replacement bow tang for Hobie® 14, 16 or Getaway. Use #19-3530 screw and #19-2520 nylock nut on Hobie 16; use #19-3530 screw on Hobie 14. The original Hobie® 14 tang is no longer available. 20120010 https://murrays.com/products/bracket-hull-cradle-aft 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-48020001.jpg?v=1676950752 HOBIE HULL CRADLE BRACKET Hobie Hull Cradle Bracket Murrays Part# 50-48020001 Sold individually https://murrays.com/products/bow-tang-p15-p16-p18-escape 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1810.jpg?v=1676950754 PRINDLE/ESCAPE BOW TANG Bow Tang Murrays Part# 56-1810 Bow tang for Prindle 15, 16, 18 and Escape Nacra Sailing factory item# 30386 https://murrays.com/products/bracket-h18sx-wing-strut 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-91490010.jpg?v=1737759133 H-18SX BRACKET WING STRUT H18SX Bracket Wing Strut Murrays Part# 50-91490010 This is the bracket that the rear support arm of an H18SX wing uses. One is mounted to the wing and one is mounted to the rear hull of an H18SX per wing. Hobie Part# 91490010 https://murrays.com/products/bridle-eye-f18-infusion 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1865.jpg?v=1676950756 NACRA BRIDLE EYE Bridle Eye 56-1865 Factory replacement bridle eye for F18 Infusion. https://murrays.com/products/bridle-foil-end-casting-nacra 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9662.jpg?v=1676950757 NACRA BRIDLE FOIL END CASTING Bridle Foil End Casting Murrays Part# 56-9662 Black end cap casting for Nacra bridle foil assembly. Nacra Sailing factory# 30302 https://murrays.com/products/bridle-foil-rod-with-screw-adjuster-nacra-5-8na-6-0na 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9669.jpg?v=1676950759 NACRA 5.8, 6.0 BRIDLE FOIL ROD WITH SCREW ADJUSTER Bridle Foil Rod with Screw Adjuster N5.8, 6.0 Murrays Part# 56-9669 https://murrays.com/products/brindle-pole-tang-p19mx 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1043.jpg?v=1676950763 PRINDLE BRIDLE POLE TANG Brindle Pole Tang P19MX Murrays Part# 56-1043 The bridle pole tang is part of the Prindle 19MX Conversion Kit. Performance Sports factory item #1043 is limited to stock on hand. https://murrays.com/products/bushing-rudder-pin-for-euro-casting 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-F99220113.jpg?v=1676950765 BUSHING RUDDER PIN FOR EURO CASTING Bushing Rudder Pin for Euro Casting Murrays Part# 50-F99220113 https://murrays.com/products/carbon-snuffer-pole-extension-27 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9638.jpg?v=1676950767 NACRA CARBON SNUFFER POLE EXTENSION 27" 27" Carbon Snuffer Pole Extension Murrays Part# 56-9638 Carbon 27" snuffer pole extension with ferrule and end cap Performance Sports factory item# 9638 https://murrays.com/products/cat-keels-kit-west-systems-epoxy 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/40-4105.jpg?v=1696962611 CAT KEELS KIT WEST SYS EPOXY Murrays fiberglass hull repair kit for Hobie, Nacra and Prindle catamarans https://murrays.com/products/centerboard-handle-h17 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50702001.jpg?v=1676950772 H-17 CENTERBOARD HANDLE Centerboard Handle H17 Murrays Part# 50-50702001 No longer available - Discontinued by Hobie Hobie Part# 50702001 https://murrays.com/products/center-post-bridle-foil-nacra 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9663.jpg?v=1676950773 NACRA CENTER POST BRIDLE FOIL Nacra Center Post Bridle Foil Murrays Part# 56-9663 Center post for Nacra bridle foil. Performance Sports factory #9663 Nacra Sailing #30303. https://murrays.com/products/centerboard-lock-screw-p18-2-p19 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56--F144.jpg?v=1679680352 PRINDLE CENTERBOARD LOCK SCREW 10-32X1" FHMS Centerboard Lock Screw 10-32X1" FHMS Murrays Part# 56-F144 #10-32 X 1" FMHS centerboard lock screw for Prindle 18.2 and 19 https://murrays.com/products/centerboard-pivot-pin-h17 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50104001.jpg?v=1676950775 H-17 CENTERBOARD PIVOT PIN Centerboard Pivot Pin H17 Murrays Part# 50-50104001 Hobie® factory replacement centerboard pivot pin for Hobie® 17 Hobie Part# 50104001 https://murrays.com/products/centerboard-spring-kit 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1027-2_Prindle_Factory_centerboard_spring_kit_for_Prindle_18.2_and_19_includes_4_springs._Performance_Sports_factory_item_1027..jpg?v=1733856856 PRINDLE CENTERBOARD SPRING KIT Centerboard Spring Kit Prindle Factory centerboard spring kit for Prindle 18.2 and 19 includes 4 springs. Performance Sports factory item #1027. https://murrays.com/products/centerboard-pivot-tube-pvc 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1029-1-rotated.jpg?v=1676950777 PVC CENTERBOARD PIVOT TUBE PVC Centerboard Pivot Tube Murrays Part# 56-1029 PVC centerboard pivot tube is Performance Sports factory item #1029 https://murrays.com/products/centerboard-spring-h17 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50350140.jpg?v=1676950779 H-17 CENTERBOARD SPRING Centerboard Spring H17 Murrays Part# 50-50350140 Hobie® factory replacement centerboard spring for Hobie 17 Hobie Part# 50350140 https://murrays.com/products/chain-plate-turbo 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10300000-1.jpg?v=1676950780 H-14 CHAIN PLATE "TURBO" Chain Plate "Turbo" Murrays Part# 50-10300000 Hobie® factory replacement chain plate for Hobie® 14 Turbo. Use three 6-4 rivets (#19-5031) for installation. https://murrays.com/products/channel-retaining-plate-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/Hobie-61110000-channel-retaining-plate.jpg?v=1732143902 H-18 CHANNEL RETAINING PLATE HOBIE 18 CHANNEL RETAINING PLATE HOBIE PART NUMBER 61110000 https://murrays.com/products/chain-plate-wave-club-getaway 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39100011_3_z26.jpg?v=1725924152 WAVE/GETAWAY SHROUD ANCHOR PLATE Wave/Getaway Shroud Anchor Plate Murrays Part# 50-39100011 Hobie® factory replacement shroud anchor chain plate for Club Wave or Getaway. The Club Wave has a three-piece trampoline and shrouds and bridles connect with clevis pins. Current boats use two plates per side. Hobie Part# 39100011 https://murrays.com/products/clamcleat-kitebar-depower-cleat-cl826 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/clamcleat-cl826-27-0826.jpg?v=1676950783 CLAMCLEAT KITEBAR DEPOWER CLEAT The ClamCleat Kiteboard depower cleat - CL826 is the most trusted cleat in the kiteboarding industry. ClamCleat has called it the Aero and Racer Back Cleat. The CL826 has been a stock item on many production kitebars since the inception of the sport, and is the most commonly used cleat on custom race bars. One of the great functions of this cleat is that it is easy to move up and down the sheeting line to adjust the bar throw and sheeting range. https://murrays.com/products/clevis-pin-1-4-x-1 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8020401.jpg?v=1676950784 CLEVIS PIN 1/4 X 1" Clevis Pin1/4 X 1" Murrays Part# 50-8020401 Hobie® factory replacement 1/4" x 1" clevis pin. Compare to Hobie Part Number 8020411 Applications: H18 / Hobie 18 SX Tiller Yoke Clevis Pin: 1 https://murrays.com/products/clevis-pin-1-4-x-83 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8020391.jpg?v=1676950785 CLEVIS PIN 1/4 X .83" Clevis Pin 1/4 x .83" Murrays Part# 50-8020391 Hobie® factory clevis pin measures 1/4" diameter x .8285" grip length (shoulder to the split ring hole). https://murrays.com/products/clevis-pin-1-4-x-2-1-4-all-inters 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4587-1-rotated.jpg?v=1676950787 CLEVIS PIN 1/4 x 2 1/4" Clevis Pin 1/4 x 2-1/4" Murrays Part# 56-4587 1/4 x 2-1/4" clevis pin for all Inter rudder assemblies. Used to hold tiller crossbar assembly to tendon. Nacra sailing factory item# 30428 https://murrays.com/products/clevis-pin-5-16-x-2-2-upper 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8020101.jpg?v=1676950788 CLEVIS PIN 5/16 X 2.2" UPPER Clevis Pin 5/16 X 2.2" Upper Murrays Part# 50-8020101 Hobie® factory replacement 5/16" diameter x 2.2" clevis pin https://murrays.com/products/clevis-pin-1-4-x-3-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4012-rotated.jpg?v=1777070737 CLEVIS PIN 1/4 X 3/4" Clevis Pin 1/4 X 3/4" Murrays Part# 56-4012 The Clevis Pin 1/4 X 3/4" is used on Prindle rudders, Nacra mast head sheave and as Nacra/Prindle shroud pin. Prindle Part# 4012 https://murrays.com/products/clevis-pin-5-16-x-2-3-16-all-inters-hobie-21se 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-4586-1.jpg?v=1751317933 CLEVIS PIN 5/16 x 2 3/16" Clevis Pin 5/16 x 2-3/16" Murrays Part# 56-4586 Uses: This 5/16" x 2-3/16" clevis pin is for all Inter rudder assemblies. Mast step pin for Hobie 21SE 21SC  Nacra sailing factory item# 30427 Same as Hobie Part# 8020611 https://murrays.com/products/compression-sleeve-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-61490000.jpg?v=1737759288 H-18 COMPRESSION SLEEVE H18 Compression Sleeve Murrays Part# 50-61490000 Hobie® factory replacement compression sleeve for mast of Hobie 18. https://murrays.com/products/compression-plate-assembly-kit-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60680001.jpg?v=1676950793 H-18 COMPRESSION PLATE ASSEMBLY KIT Compression Plate Assembly Kit H18 Murrays Part# 50-60680001 Hobie® factory mast compression plate assembly kit for Hobie 18 and 18SX https://murrays.com/products/comptip-assembly-h14 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10582100.jpg?v=1676950793 H-14 COMP-TIP ASSEMBLY NOS H14 Comp-tip Assembly Murrays Part# 50-10582100 Hobie® factory CompTip assembly for Hobie 14. https://murrays.com/products/comptip-assembly-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/20611100.jpg?v=1676950794 HOBIE 16 COMP-TIP ASSEMBLY Comp-Tip Assembly H16 Murrays Part# 50-20611100 New Comp Tip assembly for Hobie 16. Hobie Part# 20611100 https://murrays.com/products/comptip-luff-track-87-no-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38584001_1_z162.jpg?v=1726087023 H-14/18/18SX/20/WAVE COMP-TIP LUFF TRACK H14/18/18SX/20/Wave Comp-tip Luff Track 87" Murrays Part# 50-38584001 Hobie factory replacement 87" luff track for Hobie Cats except Hobie 16 and Getaway.  Older H18 comp tips were one long piece of plastic, newer boats have two sections. This plastic piece, and shorter aluminum piece. If you are replacing an older one piece luff track, you will also need to purchase the aluminum top section as well. https://murrays.com/products/comptip-luff-track-h16-93 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20616001-1.jpg?v=1676950797 H-16 COMP-TIP LUFF TRACK H16 Comp Tip Luff Track Murrays Part# 50-20616001 Hobie® factory replacement 93" luff track for Hobie® 16 with CompTip on mast. https://murrays.com/products/comptip-mast-head-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20614001-1.jpg?v=1676950798 H-16 COMP-TIP MAST HEAD Comp-Tip Mast Head H16 Murrays Part# 50-20614001 Hobie® factory replacement mast head with sheaves. Use four #19-5032 6-6 rivets for installation. This is the standard Hobie Part that comes with all comptip masts on Hobie 16s. This CompTip mast head also replaces the obsolete Hobie 16 mast head (no longer available) for all-aluminum mast. The original halyard will work if you move the halyard hook down to the appropriate height. Alternatively, a new comptip halyard #02-0273-60 https://murrays.com/products/cooler-lid-getaway 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/37370020.jpg?v=1676950799 GETAWAY COOLER LID Cooler Lid Getaway Murrays Part# 50-37370021 Hobie Part# 37370020 (formerly 37370021) https://murrays.com/products/comptip-mast-head-sheave-for-hobie-16-or-wave 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/20614210_3_-copyz258.jpg?v=1726088715 H-16/WAVE COMP-TIP MAST HEAD SHEAVE Comp-Tip Mast Head Sheave for H16 Wave Murrays Part# 50-20614210 CompTip Mast Head Sheave for Hobie 16 or Wave, is the sheave found at the top of the comptip assembly. Two sheaves are used in each assembly. The sheaves each ride on a, comptip sheave spacer. The sheave is 9/16" wide x 2 1/4" diameter with 3/8" hole. The larger sheave for the obsolete mast head for all-aluminum mast is no longer available. Hobie Part number 20614210 https://murrays.com/products/corner-casting-front-left-black-h14-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10150011-2.jpg?v=1676950802 H-14/16 CORNER CASTING FRONT LEFT-BLACK Corner Casting Front Left Black H14/16 Murrays Part# 50-10150011 Hobie® factory replacement left front corner casting (#1) for Hobie® 14 or 16. Requires six 6-8 rivets (item #19-5033) for installation https://murrays.com/products/cotter-pin-for-traveler-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8060121.jpg?v=1676950803 H-18 COTTER PIN FOR TRAVELER H18 Cotter Pin for Traveler Murrays Part# 50-8060121 Hobie® factory replacement 3/32" x 2" stainless steel cotter pin is used on Hobie 18 main traveler car. Hobie Part# 8060121 https://murrays.com/products/corner-casting-race-rear-left-black-h14-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10212011.jpg?v=1679681270 H-14/16 CORNER CASTING REAR LEFT-RACE BLACK H14/16 Corner Casting Race Rear Left Black Murrays Part# 50-10212011 Hobie® factory replacement left rear corner casting (#4) for Hobie® 14 or 16. This part replaces Hobie Cat's discontinued item #10210011. Use six 6-8 rivets (#19-5033) for installation. https://murrays.com/products/corner-casting-race-rear-right-black-h14-16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10202011.jpg?v=1679681324 H-14/16 CORNER CASTING RACE REAR RIGHT Corner Casting Race Rear Right H14/16 Murrays Part# 50-10202011 Hobie® factory replacement left rear corner casting (#3) for Hobie® 14 or 16. This part replaces Hobie Cat's discontinued item #10200011. Use six 6-8 rivets (#19-5033) for installation. Rear Crossbar casting for Hobie 16. https://murrays.com/products/crossbar-backup-plate-h17 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50253001.jpg?v=1676950807 H-17 REAR CROSSBAR BACKUP PLATE H17 Rear Crossbar Backup Plate Murrays Part# 50-50253001 Backup plate for Hobie 17 rear crossbar assembly. Hobie Part# 50253001 https://murrays.com/products/crossbar-casting-front-right-h18-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60150011.jpg?v=1680204698 H-18 CROSSBAR CASTING FRONT RIGHT-BLACK Crossbar Casting Front Right H18-Black Murrays Part# 50-60160011 Hobie® factory replacement right front crossbar casting for Hobie® 18 Hobie Part# 60160011 https://murrays.com/products/crossbar-insert-right-front-left-rear-h17-black 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50121511.jpg?v=1676950809 H-17 CROSSBAR INSERT RF/LR Crossbar Insert Right Front & Left Rear H17 Black Murrays Part# 50-50121511 Hobie® factory replacement right front/left rear crossbar insert for Hobie® 17 Hobie Part# 50121511 https://murrays.com/products/crossbar-h17-inboard-support 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50213201.jpg?v=1676950811 H-17 CROSSBAR INBOARD SUPPORT Crossbar H17 Inboard Support Murrays Part# 50-50213201 Hobie® factory replacement inboard support for Hobie® 17 crossbar Hobie Part# 50213201 https://murrays.com/products/crossbar-plug-h17-set-of-4 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50262101.jpg?v=1676950811 H-17 CROSSBAR PLUG (4) Crossbar Plug H17 Murrays Part# 50-50262101 Hobie® factory replacement plug (cap) set for Hobie® 17 Crossbar Hobie Part# 50262101 Sold in a package of 4 https://murrays.com/products/dacron-solid-braid-1-8-white 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/39-4503w.jpg?v=1715123079 1/8" DACRON SOLID BRAID Use this 1/8″ Dacron line for batten tie line and roller furling systems. For batten ties, allow about 18″ of line for each batten. Sold per foot. Spool: 1000′ (304.9m). Compare to Hobie part number RH112WHT - 8004510 https://murrays.com/products/daggerboard-hold-down-tiger 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-F99501200.jpg?v=1676950821 TIGER DAGGERBOARD HOLD DOWN Daggerboard Hold Down Tiger 50-F99501200 Hobie® factory daggerboard hold down for Tiger. https://murrays.com/products/daggerboard-position-holding-system 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/dakine-hammerhead-spreader-bar-complete 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/01-0210.jpg?v=1704421550 DAKINE HAMMERHEAD KITEBAR 10" https://murrays.com/products/dakine-kite-compression-bag 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/compression-bag.png?v=1676950834 DAKINE KITE COMPRESSION BAG Dakine Kite Compression Bag Murrays Part# 32-900675 Key Features for the Dakine Kite Compression Bag -Replaces heavier stock kite bags reducing overall travel bag weight -Shoulder carry strap for beach travel -Lightweight nylon fabric -Four compression webbing straps -Highly visibility location for writing kite size -210D Nylon -Fits up to 12m 3 strut kites, 10m 5 strut kites and 16m single strut kites. -Dimensions: 60 x 25 x 30cm https://murrays.com/products/dakine-kainui-leash-12-with-qr-clip 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/KAINUI6FTX5SIXTEENTHSINWEASYCLIP-BLACK-194626483511_10003910_BLACK-32X_MAIN_2000x_e6d8dd4c-55ee-4ab4-b978-ff11e9ec34c6.webp?v=1740766234 DAKINE KAINUI 12' SURF LEASH WITH EASY CLIP Dakine Kainui 12' Surf Leash with Quick Release Murrays Part# 32-1268 When the swell is pumping a couple feet overhead, you need a serious surf leash that will keep you tethered to your board in powerful waves. Dakine was founded with the goal of meeting this challenge, and it builds on this legacy with the twelve-foot-long Kainui with Easy Clip quick release. https://murrays.com/products/dakine-pro-form-footstrap 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Dakine-Pro-Form-Footstrap.png?v=1676950841 DAKINE PRO FORM FOOTSTRAP https://murrays.com/products/dakine-primo-footstrap 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/primo.jpg?v=1676950842 DAKINE PRIMO FOOTSTRAP-BLACK https://murrays.com/products/dakine-stance-driver 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/32-3007.jpg?v=1706657546 DAKINE STANCE DRIVER Dakine Stance Driver Murrays Part# 32-3007 DaKine's Stance Driver tool includes all the essentials and helps eliminate finger strain and stripped screws. Features: 6 piece ratchet driver #2 and #3 Phillips #2 and #3 posidrive 3/32" hex 1/4" flat head 39" [ 100cm ] tape measure Blue only Dakine item #2300005 https://murrays.com/products/dakine-twist-control-system 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/dakine-twist-control-1.jpg?v=1676950852 DAKINE TWIST CONTROL SYSTEM https://murrays.com/products/decal-mast-caution-orange 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/13440010_4_z5.jpg?v=1726093827 ORANGE MAST CAUTION DECAL Decal Mast Caution Orange Murrays Part# 13440010 Hobie® factory decal attaches to mast as a reminder to watch for overhead power lines when sailing and/or launching your boat. Hobie Part# 13440010 https://murrays.com/products/decal-sail-h14-class-insignia 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-12440000.jpg?v=1676950856 H-14 SAIL CLASS INSIGNIA Decal Sail H14 Class Insignia Murrays Part# 50-12440000 Hobie 14 round sail class insignia decal is a Hobie® factory replacement item. Hobie Part# 12440000 https://murrays.com/products/decal-sail-h16-class-insignia 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-22330010.png?v=1679690788 H-16 INSIGNIA DECAL H16 Insignia Decal Murrays Part# 50-22330000 Hobie® 16 sail class insignia decal is a Hobie® factory replacement item. https://murrays.com/products/delrin-rudder-set-screw-nacra-discontinued 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8032001.jpg?v=1676951619 NACRA DELRIN RUDDER SET SCREW Screw Delrin 3/8-16 X .75" Murrays Part# 50-8032001 Hobie® factory replacement 3/8-16 x 3/4" Delrin screw is used as rudder rake adjustment screw on Pre-EZ Lock Rudder System. Hobie Part# 8032001 https://murrays.com/products/detachable-chicken-bone 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/54-8014.jpg?v=1676950861 DETACHABLE CHICKEN BONE https://murrays.com/products/detent-plunger-ez-loc-system 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20492021-1.jpg?v=1676950863 BRAVO/WAVE/GETAWAY DETENT PLUNGER EZ LOC SYSTEM Detent Plunger EZ Lock System Murrays Part# 50-20492021 Hobie Cat® factory detent plunger for EZ Loc rudder assembly. Hobie Bravo, Getaway and Wave Hobie Part# 20492021 https://murrays.com/products/diamond-spreader-tang-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61410000.jpg?v=1676950864 H-18 DIAMOND SPREADER TANG H18 Diamond Spreader Tang Murrays Part# 50-61410000 Hobie® factory replacement diamond spreader tang for Hobie® 18. https://murrays.com/products/diamond-tang-lower-inter-nacra-500-570 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-6818.jpg?v=1738022969 NACRA LOWER DIAMOND TANG Lower Diamond Tang Murrays Part# 56-6818 Lower diamond tang for Inters and Nacra 500/570 Performance Sports Factory item# 6818 Nacra Sailing# 30196 https://murrays.com/products/diamond-wire-roller 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-61740000.jpg?v=1722264554 DIAMOND WIRE ROLLER https://murrays.com/products/diamond-wire-tang 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61480000.jpg?v=1676950867 DIAMOND WIRE TANG Diamond Wire Tang Murrays Part# 50-61480000 Hobie® factory replacement diamond wire tang Hobie Part# 61480000 https://murrays.com/products/diamond-tang-upper-for-nacra-carbon-mast 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/dielectric-silicone-compound 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/40-0350-1.jpg?v=1676950868 DIELECTRIC SILICONE COMPOUND 1/3oz Dielectric Silicone Compound 1/3oz Murrays Part# 40-0350 This marine grade dielectric silicone "grease" compound protects electrical connections by sealing out moisture, dirt, salt and corrosion. Uses include: plug connections on lifeguard/rescue services communication equipment, battery cable plugs connecting batteries to Torqeedo electric motors, outdoor electrical connections, electrical ignitions, and outdoor lighting. Effective from -40 F to 500 F degrees. 1/3 oz. tube. https://murrays.com/products/dolphin-striker-casting-prindle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-2009.jpg?v=1676950872 PRINDLE DOLPHIN STRIKER CASTING Dolphin Striker Casting Murrays Part# 56-2009 Performance Sports factory dolphin striker casting for all Prindle Cats https://murrays.com/products/dolphin-striker-mast-support-rod-nut-nacra 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-F151.jpg?v=1676950872 NACRA DOLPHIN STRIKER ROD NUT Dolphin Sticker Rod Nut Murrays Part# 56-F151 9/16" stainless nut for Nacra dolphin striker mast support rod. Used on boats built after 1983. Before threading nut onto rod, use grease or anti-seize on threads of rod to prevent thread galling. Performance Sports factory item #F151. https://murrays.com/products/dolphin-striker-mast-support-rod-nacra-old-style 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-C602.jpg?v=1676950873 NACRA DOLPHIN STRIKER ROB-OLD STYLE NACRA Dolphin Striker Rod - Old Style This 13" stainless steel mast support rod with 1/2" diameter has 13 threads per inch (TPI). For older Nacras with round crossbars built before 1983. Does not include nuts or washers. Performance Sports factory item #C602. Before assembly, use grease or anti-seize on threads to prevent thread galling. Limited to stock on hand. https://murrays.com/products/dolphin-striker-casting-small-prindle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-2009C.jpg?v=1676950876 PRINDLE SMALL DOLPHIN STRIKER CASTING Small Dolphin Striker Casting Murrays Part# 56-2009C Small dolphin striker casting for Prindle catamarans Performance Sports item# 2009C https://murrays.com/products/dolphin-striker-post-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20140001.jpg?v=1676950876 H-16 DOLPHIN STRIKER POST H16 Dolphin Striker Post Murrays Part# 50-20140001 Hobie® factory replacement dolphin striker post fits all Hobie® 16 mast steps (older and newer) https://murrays.com/products/dolphin-striker-post-h17 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50212101.jpg?v=1676950878 H-17 DOLPHIN STRIKER POST Dolphin Striker Post H17 Murrays Part# 50-50212101 Hobie® factory replacement dolphin striker post for Hobie® 17 Hobie Part# 50212101 https://murrays.com/products/dolphin-striker-post-sleeve 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-61140000.jpg?v=1676950878 H-18 DOLPHIN STRIKER POST SLEEVE Dolphin Striker Post Sleeve Murrays Part# 50-61140000 Hobie® factory replacement dolphin striker post sleeve for Hobie 18 Hobie Part# 61140000 https://murrays.com/products/dolphin-striker-post-h18-new 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60140001-1.jpg?v=1676950879 H-18 DOLPHIN STRIKER POST H18 Dolphin Striker Post Murrays Part# 50-60140001 Replacement dolphin striker post for the Hobie 18 sailboat. Hobie Part# 60140001 https://murrays.com/products/dolphin-striker-rod-prindle-10-75 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-2004.jpg?v=1739917485 PRINDLE 15, 16, 18 DOLPHIN STRIKER ROD https://murrays.com/products/dolphin-striker-rod-11-25 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-C105.jpg?v=1676950881 PRINDLE DOLPHIN STRIKER ROD 11.25" PRINDLE DOLPHIN STRIKER ROD 11.25"* The Performance Sports factory #C105 11.25" dolphin striker rod is for Prindle 18-2 or 19 standard length. Order #56-C106 if standard is too short. Limited to stock on hand. https://murrays.com/products/dolphin-striker-rod-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20170001-1.jpg?v=1676950881 H-16 DOLPHIN STRIKER ROD Dolphin Striker Rod H16 Murrays Part# 50-20170001 Hobie® factory standard replacement dolphin striker rod fits all Hobie®16 dolphin striker posts and corner castings Hobie Part# 20170001 https://murrays.com/products/dolphin-striker-rod-prindle-12-25 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-C106.jpg?v=1676950882 PRINDLE DOLPHIN STRIKER ROD 12.25" PRINDLE DOLPHIN STRIKER ROD 12.25" Nacra Sailing factory dolphin striker rod for Prindle 18-2 and 19. This extra long rod measures 12-1/4" long, as needed for some replacements. https://murrays.com/products/downhaul-hook-h17-sport 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-52410011.jpg?v=1676950883 H-17 SPORT DOWNHAUL HOOK H17 Sport Downhaul Hook Murrays Part# 50-52410011 Discontinued By Hobie - We recommend the Ronstan 8mm S-Hook 21-0049 to replace.  Hobie® factory replacement downhaul hook for Hobie 17 Sport is a special order item.. To replace downhaul line, order 8 feet of 1/4" prestretched line (#39-2312BK). Hobie Part# 52410011 https://murrays.com/products/dolphin-striker-rod-washer-nacra 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-F152.jpg?v=1676950885 NACRA/PRINDLE DOLPHIN STRIKER ROD WASHER Dolphin Striker Rod Washer Murrays Part# 56-F152 Washer for Prindle and Nacra dolphin striker rods. Performance Sports factory item# F152 https://murrays.com/products/dolphin-striker-sleeve-h17 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50212201.jpg?v=1676950886 H-17 DOLPHIN STRIKER SLEEVE Dolphin Striker Sleeve H17 Murrays Part# 50-50212201 Hobie® factory replacement dolphin striker compression sleeve for Hobie® 17 Hobie Part# 50212201 https://murrays.com/products/downhaul-sheave-h20 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-40700541.jpg?v=1676950886 H-20 DOWNHAUL SHEAVE HOBIE 20 DOWNHAUL SHEAVE - 40700541 Hobie factory replacement downhaul sheave for Hobie® 20 mast. UV-stabilized.   SPECS: 1/2" wide by 1 5/32" diameter, 1/4' hole. https://murrays.com/products/dvd-abducted-by-the-wind 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/drain-plug-with-washer-h20-h1-9 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-91281000.jpg?v=1745532905 H-20/WAVE DRAIN PLUG WITH WASHER https://murrays.com/products/dvd-big-windy 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/dvd-catamaran-sailing-a-step-by-step-guide 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/45-2043.jpg?v=1738711127 DVD: CATAMARAN SAILING GUIDE https://murrays.com/products/dvd-four 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/dvd-rick-whites-sailing-seminar-series 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/Rick-white.jpg?v=1676950893 DVD: RICK WHITE SAILING SEMINAR SERIES https://murrays.com/products/dvd-life-etc 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/dvd-progression-beginner-2nd-edition 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/dvd-the-unknown-road 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/dvd-soul-fly 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/dvd-spare-change 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/dvd-the-way-to-fly 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/dvd-wanna-get-high-snow-kite 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/e-clip-gooseneck-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-8062521.jpg?v=1676950903 H-16 E-CLIP GOOSENECK H16 E-Clip Gooseneck Murrays Part# 50-8062521 Hobie® factory replacement E-clip for gooseneck on Hobie® 16. The E-clip fits old-style boom pin that is grooved. Hobie Part# 8062521 https://murrays.com/products/end-cap-traveler-track-h17-sport 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50251001.jpg?v=1676950903 H-17 SPORT TRAVELER END CAP TRACK End Cap Traveler Track H17 Sport Murrays Part# 50-50251001 -No Longer Available- Hobie® factory replacement end cap for traveler track on Hobie® 17 Sport Hobie Part# 50251001 https://murrays.com/products/end-cap-wave-spreader 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38950011_wave_spreader_end_cap.jpg?v=1717440799 WAVE JIB SPREADER END CAP Hobie Wave Jib Spreader End Cap Murrays Part# 50-38950011 This is part of the Wave bow spreader kit. These go into the ends of the spreader pole. Replacement end cap for Hobie Wave jib spreader assembly. Sold individually Hobie Part# 38950011 https://murrays.com/products/exit-grommet-h20 2026-07-21T12:05:38-07:00 daily https://murrays.com/products/eyelet-post-h20 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-41220001-1.jpg?v=1676950908 H-20 EYELET POST Eyelet Post H20 Murrays Part# 50-41220001 The Eyelet Post H20 Hobie® factory replacement eyelet post for Hobie® 20 rear crossbar. This item replaces tie button for Inter cats #56-9882. Fits Hobie Getaway Rear Crossbar https://murrays.com/products/ez-loc-pintle-lower 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-90880221.jpg?v=1676950909 BRAVO/WAVE/GETAWAY EZ LOC LOWER PINTLE EZ Lock Lower Pintle Murrays Part# 50-90880221 Hobie® factory replacement lower pintle for EZ Loc rudder system. Fits Hobie Bravo, wave and Getaway boats Hobie Part# 90880221 https://murrays.com/products/eyestrap-wave-bridle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/38120011.jpg?v=1714144444 WAVE BRIDLE EYESTRAP Eyestrap Wave Bridle Murrays Part# 50-38120011 ​Hobie® factory replacement eyestrap for Hobie Wave bridle. https://murrays.com/products/f18-daggerboard-holder-3-4-x-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1040.jpg?v=1676950912 NACRA F18 DAGGERBOARD HOLDER F18 Daggerboard Holder Murrays Part# 56-1040 F18 Daggerboard holder for Nacra F18 measures 3/4" x 2".  This is used on the Nacra Infusion Boats, this style has been modified by some on Hobie 20s and other F18 model boats as well. This is similar in style to the Hobie Tiger kit that we have available: SKU: 50-F99501200 if you are looking to add this style of holder to a different boat. Nacra Sailing factory item# 30014 https://murrays.com/products/ez-loc-pintle-upper 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-90880211.jpg?v=1676950913 BRAVO/WAVE/GETAWAY EZ LOC UPPER PINTLE EZ Lock Upper Pintle Murrays Part# 50-90880211 Hobie® factory replacement upper pintle for EZ Loc rudder system. Fits Hobie Bravo and Getaway boats Hobie Part# 90880211 https://murrays.com/products/f18-fairlead-kit-high-roller 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-9954.jpg?v=1676950915 NACRA F18 FAIRLEAD HIGH ROLLER KIT Fairlead High Roller Kit Murrays Part# 56-9954 Mounted on a mainsheet base block, plastic spacers provide a smooth surface to guide the line for the fairlead. Kit includes one pair of spacers with screws and nuts. https://murrays.com/products/flat-head-machine-screw-5-16-x-5 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F105.jpg?v=1718810842 FLAT HEAD MACHINE SCREW 5/16-18 x 5" Flat Head Machine Screw 5/16 X 5" Murrays Part# 56-F105 Allen Head Machine Screw 5/16 X 5" Originally this was a flat head screw. Compare to Performance Sports factory item# F105 https://murrays.com/products/fairlead-thru-deck-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60270000.jpg?v=1676950917 H-18 THRU-DECK FAIRLEAD H18 Thru-Deck Fairlead Murrays Part# 50-60270000 Fairlead Thru-Deck H18 for trapeze shock cord for skipper and crew trapeze lines that go through the lip on the outside of the hull. Center hole on this fairlead is 7/8" diameter and is sleeved with a stainless steel ferrule. Mounting screw holes have a center-to-center measurement of 1-3/8". Hobie® factory replacement part. Hobie Part# 60270000 https://murrays.com/products/foam-mast-plug-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-20060000-1.jpg?v=1676950921 H-16 FOAM MAST PLUG https://murrays.com/products/forestay-adjuster-with-eye-inter-non-roller-furling 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-30324.jpg?v=1748552276 NACRA FORESTAY ADJUSTER WITH EYE Nacra Forestay Adjuster with Eye Murrays Part# 56-30324 https://murrays.com/products/forward-safety-knife 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/47-0700-2.jpg?v=1676950923 FORWARD SAFETY HOOK KNIFE SAFETY HOOK KNIFE FORWARD Murrays Part# 47-0700-2 Forward Hook Safety Knife, can be used in conjunction with the Forward Impact Vest. The Forward impact vest has a special pocket inside the webbing sleeve to store a Forward Hook Safety Knife. https://murrays.com/products/forward-sailing-snuffer-kit-hoop-sleeve 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/47-8011.jpg?v=1676950929 FORWARD SNUFFER KIT: HOOP & SLEEVE https://murrays.com/products/forward-wip-horns-transfer 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/47-002.jpg?v=1676950942 FORWARD WIP HORNS TRANSFER 9x16" Forward WIP Horns Transfer 9x16" Murrays Part# 47-0024-2 Transfer the Forward WIP Horns sticker onto any sailing surface for the best logo integration possible. No background but the one you provide. This bull has horns and competitors better watch out. https://murrays.com/products/gath-altimeter-bracket-kit-for-sport-hat-retractable-visor 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/gath-altimeter-bracket-kit-52-0070.jpg?v=1716390209 GATH ALTIMETER BRACKET KIT Gath Altimeter Bracket Kit Murrays Part# 52-0070 https://murrays.com/products/gath-chin-strap-buckle 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/52-0006.jpg?v=1676950961 GATH CHIN STRAP BUCKLE Gath Chin Strap Buckle Murrays Part# 52-0006C For 3/4" webbing as used on Gath chin straps. The buckle is sold as a set of male and female. https://murrays.com/products/gath-convertible-ear-protector 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/EAR-PKT-SET.jpg?v=1676950961 GATH EAR PROTECTOR Replacement Gath helmet ear protector fits both the Gath Gedi and Gath Surf Convertible helmets. Gath ear protectors sold individually. Also called ear cover, earpiece, ear pieces... https://murrays.com/products/gath-ear-pocket-cover-push 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/52-0062.jpg?v=1721243646 GATH "PUSH" POCKET EAR COVER Gath Ear Pocket Cover "Push" Murrays Part# 52-0062 Gath helmet ear pocket pad. Foam peel and stick ear vent cover. Used on all current Gath helmet models. Gath Neo, Gath EVA, Gath Surf Convertible and Gath Gedi helmets. https://murrays.com/products/gath-full-visor-replacement-retractable 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/RV-REP-VISORS-ALL-COLOURS.jpg?v=1676950968 GATH FULL VISOR REPLACEMENT - GREY Gath Full Visor Replacement Murrays Part# 52-0003-9 Replacement visor for a Gath retractable visor helmet.   Fits both the small and the medium sizes. Size: Small Color: Grey https://murrays.com/products/getaway-batten-set 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/37016001.jpg?v=1734542731 GETAWAY BATTEN SET OEM Getaway Batten Set Murrays Part# 50-37016001 Hobie® factory replacement batten set for the Hobie Getaway. Hobie Part# 37016001 https://murrays.com/products/getaway-mast-head-sheave 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37611000.jpg?v=1676950978 GETAWAY MASTHEAD SHEAVE GETAWAY MAST HEAD SHEAVE Replacement Hobie Getaway mast head sheave. Hobie part number 37611001 https://murrays.com/products/getaway-spreader-pole-end-cap 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-37500031.jpg?v=1676950981 GETAWAY SPREADER POLE END CAP Getaway Spreader Pole End Cap Murrays Part# 50-37500031 Hobie® factory replacement end cap for Getaway spreader pole Hobie Part# 37500031 https://murrays.com/products/gooseneck-assembly-h14-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/10770001_3_z29.jpg?v=1725652511 H-14/16 GOOSENECK ASSEMBLY HOBIE 14/16 GOOSENECK ASSEMBLY Murrays PN 50-10770001 Hobie factory replacement gooseneck assembly for Hobie 14 or 16. Hobie Cat item #10770001. https://murrays.com/products/go-joe-2-0-board-float 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/oceanrodeo-go-joe-kiteboard_float.png?v=1775668049 GO-JOE 2.0 BOARD FLOAT Go-Joe 2.0 kiteboard Float https://murrays.com/products/gooseneck-bolt-prindle-n5-2 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/56-F131.jpg?v=1723828880 PRINDLE/NACRA GOOSENECK BOLT Gooseneck Bolt Murrays Part# 56-F131 3/8" x 1-1/2" gooseneck bolt for Nacra 5.2 and all Prindles. Performance Sports factory item # F131 https://murrays.com/products/gooseneck-boom-pin-h14-h16-h18 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10772010-1.jpg?v=1676950990 H-14/16/18 GOOSENECK BOOM PIN H14/16/18 Gooseneck Boom Pin Murrays Part# 50-10772010 Hobie® factory gooseneck boom pin for Hobie® 14, 16 or 18. https://murrays.com/products/gooseneck-shackle-h14-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10772020-1_e63c34ad-3bfd-4e0c-b17d-438dcb030d3e.jpg?v=1676950993 H-14/16 GOOSENECK SHACKLE H14/16 Gooseneck Shackle Murrays Part# 50-10772020 Hobie factory replacement gooseneck shackle for Hobie 14 and Hobie 16. Uses a 3/16 x 7/8" clevis pin to connect to the main sail tack. Quick release upgrade option is the 3/16 x 3/4" Quick Release Pin, part #18-3M075L Some newer boats and racers replace the downhaul ring with a second Gooseneck Shackle. https://murrays.com/products/gooseneck-u-bracket-n5-2-prindles 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-7810.jpg?v=1676950994 PRINDLE/NACRA GOOSENECK 'U' BRACKET GOOSENECK 'U' BRACKET Murrays Part# 56-7810 Prindle Gooseneck 'U' Bracket Gooseneck "U" bracket fits Nacra 5.2 and all Prindles. Nacra Sailing factory item# 30980 https://murrays.com/products/gooseneck-vertex-hobie-all 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50772031_2_z5.jpg?v=1725653398 HOBIE GOOSENECK HINGE VERTEX Hobie Gooseneck Hinge Vertex Murrays Part# 50-50772031 Hobie® factory replacement gooseneck vertex for all Hobie® Cats. Hobie Part# 50772031 https://murrays.com/products/gooseneck-yoke-h18-h20 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-60710000.jpg?v=1676950998 H-18/20 GOOSENECK YOKE H18/20 Gooseneck Yoke Murrays Part# 50-60710000 Hobie® factory replacement gooseneck yoke for Hobie 18 and 20. Hobie Part# 60710000 https://murrays.com/products/gudgeon-die-casting-h16 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-50102011.jpg?v=1676951003 H-16 GUDGEON CASTING H16 Gudgeon Casting Murrays Part# 50-50102011 Standard on current production Hobie 16s, these die cast aluminum gudgeons are now available for your Hobie 16. Their one piece construction and plastic bushed pin holes guarantee pin hole alignment, reducing rudder pin wear, slop and drag. Die cast aluminum construction Standard on all Hobie 16 catamarans Uses 8x #8030402 screw for installation (sold separately) https://murrays.com/products/gudgeon-narrow-n5-0-n5-7-n6-0-p18-2-p19 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1011.jpg?v=1676951007 PRINDLE/NACRA NARROW GUDGEON Narrow Gudgeon Murrays Part# 56-1011 Narrow gudgeon fits Nacra 5.0, 5.7, 6.0 and Prindle 18-2 and 19 Nacra Sailing factory item# 300007 https://murrays.com/products/gudgeon-extended-p18-2-p19 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1008.jpg?v=1676951009 PRINDLE EXTENDED GUDGEON https://murrays.com/products/gudgeon-h20 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/50-40101301.jpg?v=1737759198 H-20 GUDGEON H20 Gudgeon Murrays Part# 50-40101301 Hobie 20 replacement gudgeon for the Hobie® 20. Use #12-24 x 1" PPHMS-P screws and 12-24 nylock hex nuts. Hobie Part# 40101301 https://murrays.com/products/gudgeon-screw-tiger-2008 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-F99226001.jpg?v=1676951011 TIGER GUDGEON SCREW 2008 https://murrays.com/products/gudgeon-wide-n5-2-n5-5-n5-8-18sq 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/56-1010.jpg?v=1676951011 NACRA WIDE GUDGEON N5.2/5.5/5.8 Wide Gudgeon Murrays Part# 56-1010 Wide gudgeon fits Nacra 5.2, 5.5, 5.8 and 18-square Nacra Sailing factory item# 30006 https://murrays.com/products/h14-black-mesh-trampoline 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/10970055-H15-black-mesh-tramp.jpg?v=1676951015 H-14 BLACK MESH TRAMPOLINE H14 Black Mesh Trampoline Murrays Part# 50-10970055 The H14 black mesh trampoline is a trampoline for a Hobie 14. It is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Order lacing separately. Hobie Part# 10970055 https://murrays.com/products/h14-main-fiberglass-6-batten-set 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/files/hobie-14-main-batten-set-300x274.jpg?v=1734543526 H-14 MAIN BATTEN SET H14 Main Batten Set Murrays Part# 46-3011 Hobie factory saturn shaped fiberglass battens for a Hobie 14 main sail. They are cut to length and can be shortened as necessary for your sail. This is how Hobie makes their sets! Batten caps are included. https://murrays.com/products/h14-rear-crossbar-without-castings 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-10191910.jpg?v=1676951022 H-14 REAR CROSSBAR H14 Rear Crossbar without Castings Murrays Part# 50-10191910 Hobie® factory replacement rear crossbar only for Hobie® 14 https://murrays.com/products/h16-forward-crossbar-94-with-integrated-track 2026-07-21T12:05:38-07:00 daily https://cdn.shopify.com/s/files/1/0699/1183/9019/products/50-25131910.jpg?v=1676951026 H-16 FROWARD CROSSBAR WITH MAST STEP H16 Forward Crossbar with Mast Step Murrays Part# 50-25131910 This is the current production front Crossbar for a Hobie 16. It includes the integrated traveler track and the updated mast step. Hobie® factory replacement forward crossbar for 1994 or later Hobie 16's with integrated track. Hobie Part# 25131910